qemu-e2k/nbd/server.c

2745 lines
85 KiB
C
Raw Normal View History

/*
* Copyright (C) 2016-2021 Red Hat, Inc.
* Copyright (C) 2005 Anthony Liguori <anthony@codemonkey.ws>
*
* Network Block Device Server Side
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; under version 2 of the License.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, see <http://www.gnu.org/licenses/>.
*/
#include "qemu/osdep.h"
#include "block/export.h"
2016-03-14 09:01:28 +01:00
#include "qapi/error.h"
#include "qemu/queue.h"
#include "trace.h"
#include "nbd-internal.h"
#include "qemu/units.h"
#include "qemu/memalign.h"
qemu-nbd: only send a limited number of errno codes on the wire Right now, NBD includes potentially platform-specific error values in the wire protocol. Luckily, most common error values are more or less universal: in particular, of all errno values <= 34 (up to ERANGE), they are all the same on supported platforms except for 11 (which is EAGAIN on Windows and Linux, but EDEADLK on Darwin and the *BSDs). So, in order to guarantee some portability, only keep a handful of possible error codes and squash everything else to EINVAL. This patch defines a limited set of errno values that are valid for the NBD protocol, and specifies recommendations for what error to return in specific corner cases. The set of errno values is roughly based on the errors listed in the read(2) and write(2) man pages, with some exceptions: - ENOMEM is added for servers that implement copy-on-write or other formats that require dynamic allocation. - EDQUOT is not part of the universal set of errors; it can be changed to ENOSPC on the wire format. - EFBIG is part of the universal set of errors, but it is also changed to ENOSPC because it is pretty similar to ENOSPC or EDQUOT. Incoming values will in general match system errno values, but not on the Hurd which has different errno values (they have a "subsystem code" equal to 0x10 in bits 24-31). The Hurd is probably not something to which QEMU has been ported, but still do the right thing and reverse-map the NBD errno values to the system errno values. The corresponding patch to the NBD protocol description can be found at http://article.gmane.org/gmane.linux.drivers.nbd.general/3154. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-05-07 17:25:10 +02:00
#define NBD_META_ID_BASE_ALLOCATION 0
#define NBD_META_ID_ALLOCATION_DEPTH 1
/* Dirty bitmaps use 'NBD_META_ID_DIRTY_BITMAP + i', so keep this id last. */
#define NBD_META_ID_DIRTY_BITMAP 2
/*
* NBD_MAX_BLOCK_STATUS_EXTENTS: 1 MiB of extents data. An empirical
* constant. If an increase is needed, note that the NBD protocol
* recommends no larger than 32 mb, so that the client won't consider
* the reply as a denial of service attack.
*/
#define NBD_MAX_BLOCK_STATUS_EXTENTS (1 * MiB / 8)
qemu-nbd: only send a limited number of errno codes on the wire Right now, NBD includes potentially platform-specific error values in the wire protocol. Luckily, most common error values are more or less universal: in particular, of all errno values <= 34 (up to ERANGE), they are all the same on supported platforms except for 11 (which is EAGAIN on Windows and Linux, but EDEADLK on Darwin and the *BSDs). So, in order to guarantee some portability, only keep a handful of possible error codes and squash everything else to EINVAL. This patch defines a limited set of errno values that are valid for the NBD protocol, and specifies recommendations for what error to return in specific corner cases. The set of errno values is roughly based on the errors listed in the read(2) and write(2) man pages, with some exceptions: - ENOMEM is added for servers that implement copy-on-write or other formats that require dynamic allocation. - EDQUOT is not part of the universal set of errors; it can be changed to ENOSPC on the wire format. - EFBIG is part of the universal set of errors, but it is also changed to ENOSPC because it is pretty similar to ENOSPC or EDQUOT. Incoming values will in general match system errno values, but not on the Hurd which has different errno values (they have a "subsystem code" equal to 0x10 in bits 24-31). The Hurd is probably not something to which QEMU has been ported, but still do the right thing and reverse-map the NBD errno values to the system errno values. The corresponding patch to the NBD protocol description can be found at http://article.gmane.org/gmane.linux.drivers.nbd.general/3154. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-05-07 17:25:10 +02:00
static int system_errno_to_nbd_errno(int err)
{
switch (err) {
case 0:
return NBD_SUCCESS;
case EPERM:
case EROFS:
qemu-nbd: only send a limited number of errno codes on the wire Right now, NBD includes potentially platform-specific error values in the wire protocol. Luckily, most common error values are more or less universal: in particular, of all errno values <= 34 (up to ERANGE), they are all the same on supported platforms except for 11 (which is EAGAIN on Windows and Linux, but EDEADLK on Darwin and the *BSDs). So, in order to guarantee some portability, only keep a handful of possible error codes and squash everything else to EINVAL. This patch defines a limited set of errno values that are valid for the NBD protocol, and specifies recommendations for what error to return in specific corner cases. The set of errno values is roughly based on the errors listed in the read(2) and write(2) man pages, with some exceptions: - ENOMEM is added for servers that implement copy-on-write or other formats that require dynamic allocation. - EDQUOT is not part of the universal set of errors; it can be changed to ENOSPC on the wire format. - EFBIG is part of the universal set of errors, but it is also changed to ENOSPC because it is pretty similar to ENOSPC or EDQUOT. Incoming values will in general match system errno values, but not on the Hurd which has different errno values (they have a "subsystem code" equal to 0x10 in bits 24-31). The Hurd is probably not something to which QEMU has been ported, but still do the right thing and reverse-map the NBD errno values to the system errno values. The corresponding patch to the NBD protocol description can be found at http://article.gmane.org/gmane.linux.drivers.nbd.general/3154. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-05-07 17:25:10 +02:00
return NBD_EPERM;
case EIO:
return NBD_EIO;
case ENOMEM:
return NBD_ENOMEM;
#ifdef EDQUOT
case EDQUOT:
#endif
case EFBIG:
case ENOSPC:
return NBD_ENOSPC;
case EOVERFLOW:
return NBD_EOVERFLOW;
nbd: Prepare for NBD_CMD_FLAG_FAST_ZERO Commit fe0480d6 and friends added BDRV_REQ_NO_FALLBACK as a way to avoid wasting time on a preliminary write-zero request that will later be rewritten by actual data, if it is known that the write-zero request will use a slow fallback; but in doing so, could not optimize for NBD. The NBD specification is now considering an extension that will allow passing on those semantics; this patch updates the new protocol bits and 'qemu-nbd --list' output to recognize the bit, as well as the new errno value possible when using the new flag; while upcoming patches will improve the client to use the feature when present, and the server to advertise support for it. The NBD spec recommends (but not requires) that ENOTSUP be avoided for all but failures of a fast zero (the only time it is mandatory to avoid an ENOTSUP failure is when fast zero is supported but not requested during write zeroes; the questionable use is for ENOTSUP to other actions like a normal write request). However, clients that get an unexpected ENOTSUP will either already be treating it the same as EINVAL, or may appreciate the extra bit of information. We were equally loose for returning EOVERFLOW in more situations than recommended by the spec, so if it turns out to be a problem in practice, a later patch can tighten handling for both error codes. Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <20190823143726.27062-3-eblake@redhat.com> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> [eblake: tweak commit message, also handle EOPNOTSUPP]
2019-08-23 16:37:23 +02:00
case ENOTSUP:
#if ENOTSUP != EOPNOTSUPP
case EOPNOTSUPP:
#endif
return NBD_ENOTSUP;
case ESHUTDOWN:
return NBD_ESHUTDOWN;
qemu-nbd: only send a limited number of errno codes on the wire Right now, NBD includes potentially platform-specific error values in the wire protocol. Luckily, most common error values are more or less universal: in particular, of all errno values <= 34 (up to ERANGE), they are all the same on supported platforms except for 11 (which is EAGAIN on Windows and Linux, but EDEADLK on Darwin and the *BSDs). So, in order to guarantee some portability, only keep a handful of possible error codes and squash everything else to EINVAL. This patch defines a limited set of errno values that are valid for the NBD protocol, and specifies recommendations for what error to return in specific corner cases. The set of errno values is roughly based on the errors listed in the read(2) and write(2) man pages, with some exceptions: - ENOMEM is added for servers that implement copy-on-write or other formats that require dynamic allocation. - EDQUOT is not part of the universal set of errors; it can be changed to ENOSPC on the wire format. - EFBIG is part of the universal set of errors, but it is also changed to ENOSPC because it is pretty similar to ENOSPC or EDQUOT. Incoming values will in general match system errno values, but not on the Hurd which has different errno values (they have a "subsystem code" equal to 0x10 in bits 24-31). The Hurd is probably not something to which QEMU has been ported, but still do the right thing and reverse-map the NBD errno values to the system errno values. The corresponding patch to the NBD protocol description can be found at http://article.gmane.org/gmane.linux.drivers.nbd.general/3154. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-05-07 17:25:10 +02:00
case EINVAL:
default:
return NBD_EINVAL;
}
}
/* Definitions for opaque data types */
typedef struct NBDRequestData NBDRequestData;
struct NBDRequestData {
NBDClient *client;
uint8_t *data;
bool complete;
};
struct NBDExport {
BlockExport common;
char *name;
char *description;
uint64_t size;
uint16_t nbdflags;
QTAILQ_HEAD(, NBDClient) clients;
QTAILQ_ENTRY(NBDExport) next;
BlockBackend *eject_notifier_blk;
Notifier eject_notifier;
bool allocation_depth;
BdrvDirtyBitmap **export_bitmaps;
size_t nr_export_bitmaps;
};
static QTAILQ_HEAD(, NBDExport) exports = QTAILQ_HEAD_INITIALIZER(exports);
/* NBDExportMetaContexts represents a list of contexts to be exported,
* as selected by NBD_OPT_SET_META_CONTEXT. Also used for
* NBD_OPT_LIST_META_CONTEXT. */
typedef struct NBDExportMetaContexts {
NBDExport *exp;
size_t count; /* number of negotiated contexts */
bool base_allocation; /* export base:allocation context (block status) */
bool allocation_depth; /* export qemu:allocation-depth */
bool *bitmaps; /*
* export qemu:dirty-bitmap:<export bitmap name>,
* sized by exp->nr_export_bitmaps
*/
} NBDExportMetaContexts;
struct NBDClient {
int refcount;
nbd: Fix regression on resiliency to port scan Back in qemu 2.5, qemu-nbd was immune to port probes (a transient server would not quit, regardless of how many probe connections came and went, until a connection actually negotiated). But we broke that in commit ee7d7aa when removing the return value to nbd_client_new(), although that patch also introduced a bug causing an assertion failure on a client that fails negotiation. We then made it worse during refactoring in commit 1a6245a (a segfault before we could even assert); the (masked) assertion was cleaned up in d3780c2 (still in 2.6), and just recently we finally fixed the segfault ("nbd: Fully intialize client in case of failed negotiation"). But that still means that ever since we added TLS support to qemu-nbd, we have been vulnerable to an ill-timed port-scan being able to cause a denial of service by taking down qemu-nbd before a real client has a chance to connect. Since negotiation is now handled asynchronously via coroutines, we no longer have a synchronous point of return by re-adding a return value to nbd_client_new(). So this patch instead wires things up to pass the negotiation status through the close_fn callback function. Simple test across two terminals: $ qemu-nbd -f raw -p 30001 file $ nmap 127.0.0.1 -p 30001 && \ qemu-io -c 'r 0 512' -f raw nbd://localhost:30001 Note that this patch does not change what constitutes successful negotiation (thus, a client must enter transmission phase before that client can be considered as a reason to terminate the server when the connection ends). Perhaps we may want to tweak things in a later patch to also treat a client that uses NBD_OPT_ABORT as being a 'successful' negotiation (the client correctly talked the NBD protocol, and informed us it was not going to use our export after all), but that's a discussion for another day. Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1451614 Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <20170608222617.20376-1-eblake@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-06-09 00:26:17 +02:00
void (*close_fn)(NBDClient *client, bool negotiated);
NBDExport *exp;
QCryptoTLSCreds *tlscreds;
qemu-nbd: add support for authorization of TLS clients Currently any client which can complete the TLS handshake is able to use the NBD server. The server admin can turn on the 'verify-peer' option for the x509 creds to require the client to provide a x509 certificate. This means the client will have to acquire a certificate from the CA before they are permitted to use the NBD server. This is still a fairly low bar to cross. This adds a '--tls-authz OBJECT-ID' option to the qemu-nbd command which takes the ID of a previously added 'QAuthZ' object instance. This will be used to validate the client's x509 distinguished name. Clients failing the authorization check will not be permitted to use the NBD server. For example to setup authorization that only allows connection from a client whose x509 certificate distinguished name is CN=laptop.example.com,O=Example Org,L=London,ST=London,C=GB escape the commas in the name and use: qemu-nbd --object tls-creds-x509,id=tls0,dir=/home/berrange/qemutls,\ endpoint=server,verify-peer=yes \ --object 'authz-simple,id=auth0,identity=CN=laptop.example.com,,\ O=Example Org,,L=London,,ST=London,,C=GB' \ --tls-creds tls0 \ --tls-authz authz0 \ ....other qemu-nbd args... NB: a real shell command line would not have leading whitespace after the line continuation, it is just included here for clarity. Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Message-Id: <20190227162035.18543-2-berrange@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> [eblake: split long line in --help text, tweak 233 to show that whitespace after ,, in identity= portion is actually okay] Signed-off-by: Eric Blake <eblake@redhat.com>
2019-02-27 17:20:33 +01:00
char *tlsauthz;
QIOChannelSocket *sioc; /* The underlying data channel */
QIOChannel *ioc; /* The current I/O channel which may differ (eg TLS) */
Coroutine *recv_coroutine;
CoMutex send_lock;
Coroutine *send_coroutine;
bool read_yielding;
bool quiescing;
QTAILQ_ENTRY(NBDClient) next;
int nb_requests;
bool closing;
nbd/server: Trace client noncompliance on unaligned requests We've recently added traces for clients to flag server non-compliance; let's do the same for servers to flag client non-compliance. According to the spec, if the client requests NBD_INFO_BLOCK_SIZE, it is promising to send all requests aligned to those boundaries. Of course, if the client does not request NBD_INFO_BLOCK_SIZE, then it made no promises so we shouldn't flag anything; and because we are willing to handle clients that made no promises (the spec allows us to use NBD_REP_ERR_BLOCK_SIZE_REQD if we had been unwilling), we already have to handle unaligned requests (which the block layer already does on our behalf). So even though the spec allows us to return EINVAL for clients that promised to behave, it's easier to always answer unaligned requests. Still, flagging non-compliance can be useful in debugging a client that is trying to be maximally portable. Qemu as client used to have one spot where it sent non-compliant requests: if the server sends an unaligned reply to NBD_CMD_BLOCK_STATUS, and the client was iterating over the entire disk, the next request would start at that unaligned point; this was fixed in commit a39286dd when the client was taught to work around server non-compliance; but is equally fixed if the server is patched to not send unaligned replies in the first place (yes, qemu 4.0 as server still has few such bugs, although they will be patched in 4.1). Fortunately, I did not find any more spots where qemu as client was non-compliant. I was able to test the patch by using the following hack to convince qemu-io to run various unaligned commands, coupled with serving 512-byte alignment by intentionally omitting '-f raw' on the server while viewing server traces. | diff --git i/nbd/client.c w/nbd/client.c | index 427980bdd22..1858b2aac35 100644 | --- i/nbd/client.c | +++ w/nbd/client.c | @@ -449,6 +449,7 @@ static int nbd_opt_info_or_go(QIOChannel *ioc, uint32_t opt, | nbd_send_opt_abort(ioc); | return -1; | } | + info->min_block = 1;//hack | if (!is_power_of_2(info->min_block)) { | error_setg(errp, "server minimum block size %" PRIu32 | " is not a power of two", info->min_block); Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <20190403030526.12258-3-eblake@redhat.com> [eblake: address minor review nits] Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
2019-04-03 05:05:21 +02:00
uint32_t check_align; /* If non-zero, check for aligned client requests */
bool structured_reply;
NBDExportMetaContexts export_meta;
uint32_t opt; /* Current option being negotiated */
uint32_t optlen; /* remaining length of data in ioc for the option being
negotiated now */
};
static void nbd_client_receive_next_request(NBDClient *client);
/* Basic flow for negotiation
Server Client
Negotiate
or
Server Client
Negotiate #1
Option
Negotiate #2
----
followed by
Server Client
Request
Response
Request
Response
...
...
Request (type == 2)
*/
static inline void set_be_option_rep(NBDOptionReply *rep, uint32_t option,
uint32_t type, uint32_t length)
{
stq_be_p(&rep->magic, NBD_REP_MAGIC);
stl_be_p(&rep->option, option);
stl_be_p(&rep->type, type);
stl_be_p(&rep->length, length);
}
/* Send a reply header, including length, but no payload.
* Return -errno on error, 0 on success. */
static int nbd_negotiate_send_rep_len(NBDClient *client, uint32_t type,
uint32_t len, Error **errp)
{
NBDOptionReply rep;
trace_nbd_negotiate_send_rep_len(client->opt, nbd_opt_lookup(client->opt),
type, nbd_rep_lookup(type), len);
assert(len < NBD_MAX_BUFFER_SIZE);
set_be_option_rep(&rep, client->opt, type, len);
return nbd_write(client->ioc, &rep, sizeof(rep), errp);
}
/* Send a reply header with default 0 length.
* Return -errno on error, 0 on success. */
static int nbd_negotiate_send_rep(NBDClient *client, uint32_t type,
Error **errp)
{
return nbd_negotiate_send_rep_len(client, type, 0, errp);
}
/* Send an error reply.
* Return -errno on error, 0 on success. */
static int G_GNUC_PRINTF(4, 0)
nbd_negotiate_send_rep_verr(NBDClient *client, uint32_t type,
Error **errp, const char *fmt, va_list va)
{
nbd: Use ERRP_GUARD() If we want to check error after errp-function call, we need to introduce local_err and then propagate it to errp. Instead, use the ERRP_GUARD() macro, benefits are: 1. No need of explicit error_propagate call 2. No need of explicit local_err variable: use errp directly 3. ERRP_GUARD() leaves errp as is if it's not NULL or &error_fatal, this means that we don't break error_abort (we'll abort on error_set, not on error_propagate) If we want to add some info to errp (by error_prepend() or error_append_hint()), we must use the ERRP_GUARD() macro. Otherwise, this info will not be added when errp == &error_fatal (the program will exit prior to the error_append_hint() or error_prepend() call). Fix several such cases, e.g. in nbd_read(). This commit is generated by command sed -n '/^Network Block Device (NBD)$/,/^$/{s/^F: //p}' \ MAINTAINERS | \ xargs git ls-files | grep '\.[hc]$' | \ xargs spatch \ --sp-file scripts/coccinelle/errp-guard.cocci \ --macro-file scripts/cocci-macro-file.h \ --in-place --no-show-diff --max-width 80 Reported-by: Kevin Wolf <kwolf@redhat.com> Reported-by: Greg Kurz <groug@kaod.org> Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> [Commit message tweaked] Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20200707165037.1026246-8-armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> [ERRP_AUTO_PROPAGATE() renamed to ERRP_GUARD(), and auto-propagated-errp.cocci to errp-guard.cocci. Commit message tweaked again.]
2020-07-07 18:50:36 +02:00
ERRP_GUARD();
g_autofree char *msg = NULL;
int ret;
size_t len;
msg = g_strdup_vprintf(fmt, va);
len = strlen(msg);
nbd/server: Avoid long error message assertions CVE-2020-10761 Ever since commit 36683283 (v2.8), the server code asserts that error strings sent to the client are well-formed per the protocol by not exceeding the maximum string length of 4096. At the time the server first started sending error messages, the assertion could not be triggered, because messages were completely under our control. However, over the years, we have added latent scenarios where a client could trigger the server to attempt an error message that would include the client's information if it passed other checks first: - requesting NBD_OPT_INFO/GO on an export name that is not present (commit 0cfae925 in v2.12 echoes the name) - requesting NBD_OPT_LIST/SET_META_CONTEXT on an export name that is not present (commit e7b1948d in v2.12 echoes the name) At the time, those were still safe because we flagged names larger than 256 bytes with a different message; but that changed in commit 93676c88 (v4.2) when we raised the name limit to 4096 to match the NBD string limit. (That commit also failed to change the magic number 4096 in nbd_negotiate_send_rep_err to the just-introduced named constant.) So with that commit, long client names appended to server text can now trigger the assertion, and thus be used as a denial of service attack against a server. As a mitigating factor, if the server requires TLS, the client cannot trigger the problematic paths unless it first supplies TLS credentials, and such trusted clients are less likely to try to intentionally crash the server. We may later want to further sanitize the user-supplied strings we place into our error messages, such as scrubbing out control characters, but that is less important to the CVE fix, so it can be a later patch to the new nbd_sanitize_name. Consideration was given to changing the assertion in nbd_negotiate_send_rep_verr to instead merely log a server error and truncate the message, to avoid leaving a latent path that could trigger a future CVE DoS on any new error message. However, this merely complicates the code for something that is already (correctly) flagging coding errors, and now that we are aware of the long message pitfall, we are less likely to introduce such errors in the future, which would make such error handling dead code. Reported-by: Xueqiang Wei <xuwei@redhat.com> CC: qemu-stable@nongnu.org Fixes: https://bugzilla.redhat.com/1843684 CVE-2020-10761 Fixes: 93676c88d7 Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <20200610163741.3745251-2-eblake@redhat.com> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
2020-06-08 20:26:37 +02:00
assert(len < NBD_MAX_STRING_SIZE);
trace_nbd_negotiate_send_rep_err(msg);
ret = nbd_negotiate_send_rep_len(client, type, len, errp);
if (ret < 0) {
return ret;
}
if (nbd_write(client->ioc, msg, len, errp) < 0) {
error_prepend(errp, "write failed (error message): ");
return -EIO;
}
return 0;
}
nbd/server: Avoid long error message assertions CVE-2020-10761 Ever since commit 36683283 (v2.8), the server code asserts that error strings sent to the client are well-formed per the protocol by not exceeding the maximum string length of 4096. At the time the server first started sending error messages, the assertion could not be triggered, because messages were completely under our control. However, over the years, we have added latent scenarios where a client could trigger the server to attempt an error message that would include the client's information if it passed other checks first: - requesting NBD_OPT_INFO/GO on an export name that is not present (commit 0cfae925 in v2.12 echoes the name) - requesting NBD_OPT_LIST/SET_META_CONTEXT on an export name that is not present (commit e7b1948d in v2.12 echoes the name) At the time, those were still safe because we flagged names larger than 256 bytes with a different message; but that changed in commit 93676c88 (v4.2) when we raised the name limit to 4096 to match the NBD string limit. (That commit also failed to change the magic number 4096 in nbd_negotiate_send_rep_err to the just-introduced named constant.) So with that commit, long client names appended to server text can now trigger the assertion, and thus be used as a denial of service attack against a server. As a mitigating factor, if the server requires TLS, the client cannot trigger the problematic paths unless it first supplies TLS credentials, and such trusted clients are less likely to try to intentionally crash the server. We may later want to further sanitize the user-supplied strings we place into our error messages, such as scrubbing out control characters, but that is less important to the CVE fix, so it can be a later patch to the new nbd_sanitize_name. Consideration was given to changing the assertion in nbd_negotiate_send_rep_verr to instead merely log a server error and truncate the message, to avoid leaving a latent path that could trigger a future CVE DoS on any new error message. However, this merely complicates the code for something that is already (correctly) flagging coding errors, and now that we are aware of the long message pitfall, we are less likely to introduce such errors in the future, which would make such error handling dead code. Reported-by: Xueqiang Wei <xuwei@redhat.com> CC: qemu-stable@nongnu.org Fixes: https://bugzilla.redhat.com/1843684 CVE-2020-10761 Fixes: 93676c88d7 Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <20200610163741.3745251-2-eblake@redhat.com> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
2020-06-08 20:26:37 +02:00
/*
* Return a malloc'd copy of @name suitable for use in an error reply.
*/
static char *
nbd_sanitize_name(const char *name)
{
if (strnlen(name, 80) < 80) {
return g_strdup(name);
}
/* XXX Should we also try to sanitize any control characters? */
return g_strdup_printf("%.80s...", name);
}
/* Send an error reply.
* Return -errno on error, 0 on success. */
static int G_GNUC_PRINTF(4, 5)
nbd_negotiate_send_rep_err(NBDClient *client, uint32_t type,
Error **errp, const char *fmt, ...)
{
va_list va;
int ret;
va_start(va, fmt);
ret = nbd_negotiate_send_rep_verr(client, type, errp, fmt, va);
va_end(va);
return ret;
}
/* Drop remainder of the current option, and send a reply with the
* given error type and message. Return -errno on read or write
* failure; or 0 if connection is still live. */
static int G_GNUC_PRINTF(4, 0)
nbd_opt_vdrop(NBDClient *client, uint32_t type, Error **errp,
const char *fmt, va_list va)
{
int ret = nbd_drop(client->ioc, client->optlen, errp);
client->optlen = 0;
if (!ret) {
ret = nbd_negotiate_send_rep_verr(client, type, errp, fmt, va);
}
return ret;
}
static int G_GNUC_PRINTF(4, 5)
nbd_opt_drop(NBDClient *client, uint32_t type, Error **errp,
const char *fmt, ...)
{
int ret;
va_list va;
va_start(va, fmt);
ret = nbd_opt_vdrop(client, type, errp, fmt, va);
va_end(va);
return ret;
}
static int G_GNUC_PRINTF(3, 4)
nbd_opt_invalid(NBDClient *client, Error **errp, const char *fmt, ...)
{
int ret;
va_list va;
va_start(va, fmt);
ret = nbd_opt_vdrop(client, NBD_REP_ERR_INVALID, errp, fmt, va);
va_end(va);
return ret;
}
/* Read size bytes from the unparsed payload of the current option.
* If @check_nul, require that no NUL bytes appear in buffer.
* Return -errno on I/O error, 0 if option was completely handled by
* sending a reply about inconsistent lengths, or 1 on success. */
static int nbd_opt_read(NBDClient *client, void *buffer, size_t size,
bool check_nul, Error **errp)
{
if (size > client->optlen) {
return nbd_opt_invalid(client, errp,
"Inconsistent lengths in option %s",
nbd_opt_lookup(client->opt));
}
client->optlen -= size;
if (qio_channel_read_all(client->ioc, buffer, size, errp) < 0) {
return -EIO;
}
if (check_nul && strnlen(buffer, size) != size) {
return nbd_opt_invalid(client, errp,
"Unexpected embedded NUL in option %s",
nbd_opt_lookup(client->opt));
}
return 1;
}
/* Drop size bytes from the unparsed payload of the current option.
* Return -errno on I/O error, 0 if option was completely handled by
* sending a reply about inconsistent lengths, or 1 on success. */
static int nbd_opt_skip(NBDClient *client, size_t size, Error **errp)
{
if (size > client->optlen) {
return nbd_opt_invalid(client, errp,
"Inconsistent lengths in option %s",
nbd_opt_lookup(client->opt));
}
client->optlen -= size;
return nbd_drop(client->ioc, size, errp) < 0 ? -EIO : 1;
}
/* nbd_opt_read_name
*
* Read a string with the format:
* uint32_t len (<= NBD_MAX_STRING_SIZE)
* len bytes string (not 0-terminated)
*
* On success, @name will be allocated.
* If @length is non-null, it will be set to the actual string length.
*
* Return -errno on I/O error, 0 if option was completely handled by
* sending a reply about inconsistent lengths, or 1 on success.
*/
static int nbd_opt_read_name(NBDClient *client, char **name, uint32_t *length,
Error **errp)
{
int ret;
uint32_t len;
g_autofree char *local_name = NULL;
*name = NULL;
ret = nbd_opt_read(client, &len, sizeof(len), false, errp);
if (ret <= 0) {
return ret;
}
len = cpu_to_be32(len);
if (len > NBD_MAX_STRING_SIZE) {
return nbd_opt_invalid(client, errp,
"Invalid name length: %" PRIu32, len);
}
local_name = g_malloc(len + 1);
ret = nbd_opt_read(client, local_name, len, true, errp);
if (ret <= 0) {
return ret;
}
local_name[len] = '\0';
if (length) {
*length = len;
}
*name = g_steal_pointer(&local_name);
return 1;
}
/* Send a single NBD_REP_SERVER reply to NBD_OPT_LIST, including payload.
* Return -errno on error, 0 on success. */
static int nbd_negotiate_send_rep_list(NBDClient *client, NBDExport *exp,
Error **errp)
{
nbd: Use ERRP_GUARD() If we want to check error after errp-function call, we need to introduce local_err and then propagate it to errp. Instead, use the ERRP_GUARD() macro, benefits are: 1. No need of explicit error_propagate call 2. No need of explicit local_err variable: use errp directly 3. ERRP_GUARD() leaves errp as is if it's not NULL or &error_fatal, this means that we don't break error_abort (we'll abort on error_set, not on error_propagate) If we want to add some info to errp (by error_prepend() or error_append_hint()), we must use the ERRP_GUARD() macro. Otherwise, this info will not be added when errp == &error_fatal (the program will exit prior to the error_append_hint() or error_prepend() call). Fix several such cases, e.g. in nbd_read(). This commit is generated by command sed -n '/^Network Block Device (NBD)$/,/^$/{s/^F: //p}' \ MAINTAINERS | \ xargs git ls-files | grep '\.[hc]$' | \ xargs spatch \ --sp-file scripts/coccinelle/errp-guard.cocci \ --macro-file scripts/cocci-macro-file.h \ --in-place --no-show-diff --max-width 80 Reported-by: Kevin Wolf <kwolf@redhat.com> Reported-by: Greg Kurz <groug@kaod.org> Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> [Commit message tweaked] Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20200707165037.1026246-8-armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> [ERRP_AUTO_PROPAGATE() renamed to ERRP_GUARD(), and auto-propagated-errp.cocci to errp-guard.cocci. Commit message tweaked again.]
2020-07-07 18:50:36 +02:00
ERRP_GUARD();
size_t name_len, desc_len;
uint32_t len;
const char *name = exp->name ? exp->name : "";
const char *desc = exp->description ? exp->description : "";
QIOChannel *ioc = client->ioc;
int ret;
trace_nbd_negotiate_send_rep_list(name, desc);
name_len = strlen(name);
desc_len = strlen(desc);
assert(name_len <= NBD_MAX_STRING_SIZE && desc_len <= NBD_MAX_STRING_SIZE);
len = name_len + desc_len + sizeof(len);
ret = nbd_negotiate_send_rep_len(client, NBD_REP_SERVER, len, errp);
if (ret < 0) {
return ret;
}
len = cpu_to_be32(name_len);
if (nbd_write(ioc, &len, sizeof(len), errp) < 0) {
error_prepend(errp, "write failed (name length): ");
return -EINVAL;
}
if (nbd_write(ioc, name, name_len, errp) < 0) {
error_prepend(errp, "write failed (name buffer): ");
return -EINVAL;
}
if (nbd_write(ioc, desc, desc_len, errp) < 0) {
error_prepend(errp, "write failed (description buffer): ");
return -EINVAL;
}
return 0;
}
/* Process the NBD_OPT_LIST command, with a potential series of replies.
* Return -errno on error, 0 on success. */
static int nbd_negotiate_handle_list(NBDClient *client, Error **errp)
{
NBDExport *exp;
assert(client->opt == NBD_OPT_LIST);
/* For each export, send a NBD_REP_SERVER reply. */
QTAILQ_FOREACH(exp, &exports, next) {
if (nbd_negotiate_send_rep_list(client, exp, errp)) {
return -EINVAL;
}
}
/* Finish with a NBD_REP_ACK. */
return nbd_negotiate_send_rep(client, NBD_REP_ACK, errp);
}
static void nbd_check_meta_export(NBDClient *client)
{
if (client->exp != client->export_meta.exp) {
client->export_meta.count = 0;
}
}
/* Send a reply to NBD_OPT_EXPORT_NAME.
* Return -errno on error, 0 on success. */
nbd: Improve per-export flag handling in server When creating a read-only image, we are still advertising support for TRIM and WRITE_ZEROES to the client, even though the client should not be issuing those commands. But seeing this requires looking across multiple functions: All callers to nbd_export_new() passed a single flag based solely on whether the export allows writes. Later, we then pass a constant set of flags to nbd_negotiate_options() (namely, the set of flags which we always support, at least for writable images), which is then further dynamically modified with NBD_FLAG_SEND_DF based on client requests for structured options. Finally, when processing NBD_OPT_EXPORT_NAME or NBD_OPT_EXPORT_GO we bitwise-or the original caller's flag with the runtime set of flags we've built up over several functions. Let's refactor things to instead compute a baseline of flags as soon as possible which gets shared between multiple clients, in nbd_export_new(), and changing the signature for the callers to pass in a simpler bool rather than having to figure out flags. We can then get rid of the 'myflags' parameter to various functions, and instead refer to client for everything we need (we still have to perform a bitwise-OR for NBD_FLAG_SEND_DF during NBD_OPT_EXPORT_NAME and NBD_OPT_EXPORT_GO, but it's easier to see what is being computed). This lets us quit advertising senseless flags for read-only images, as well as making the next patch for exposing FAST_ZERO support easier to write. Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <20190823143726.27062-2-eblake@redhat.com> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> [eblake: improve commit message, update iotest 223]
2019-08-23 16:37:22 +02:00
static int nbd_negotiate_handle_export_name(NBDClient *client, bool no_zeroes,
Error **errp)
{
nbd: Use ERRP_GUARD() If we want to check error after errp-function call, we need to introduce local_err and then propagate it to errp. Instead, use the ERRP_GUARD() macro, benefits are: 1. No need of explicit error_propagate call 2. No need of explicit local_err variable: use errp directly 3. ERRP_GUARD() leaves errp as is if it's not NULL or &error_fatal, this means that we don't break error_abort (we'll abort on error_set, not on error_propagate) If we want to add some info to errp (by error_prepend() or error_append_hint()), we must use the ERRP_GUARD() macro. Otherwise, this info will not be added when errp == &error_fatal (the program will exit prior to the error_append_hint() or error_prepend() call). Fix several such cases, e.g. in nbd_read(). This commit is generated by command sed -n '/^Network Block Device (NBD)$/,/^$/{s/^F: //p}' \ MAINTAINERS | \ xargs git ls-files | grep '\.[hc]$' | \ xargs spatch \ --sp-file scripts/coccinelle/errp-guard.cocci \ --macro-file scripts/cocci-macro-file.h \ --in-place --no-show-diff --max-width 80 Reported-by: Kevin Wolf <kwolf@redhat.com> Reported-by: Greg Kurz <groug@kaod.org> Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> [Commit message tweaked] Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20200707165037.1026246-8-armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> [ERRP_AUTO_PROPAGATE() renamed to ERRP_GUARD(), and auto-propagated-errp.cocci to errp-guard.cocci. Commit message tweaked again.]
2020-07-07 18:50:36 +02:00
ERRP_GUARD();
g_autofree char *name = NULL;
char buf[NBD_REPLY_EXPORT_NAME_SIZE] = "";
size_t len;
int ret;
nbd: Improve per-export flag handling in server When creating a read-only image, we are still advertising support for TRIM and WRITE_ZEROES to the client, even though the client should not be issuing those commands. But seeing this requires looking across multiple functions: All callers to nbd_export_new() passed a single flag based solely on whether the export allows writes. Later, we then pass a constant set of flags to nbd_negotiate_options() (namely, the set of flags which we always support, at least for writable images), which is then further dynamically modified with NBD_FLAG_SEND_DF based on client requests for structured options. Finally, when processing NBD_OPT_EXPORT_NAME or NBD_OPT_EXPORT_GO we bitwise-or the original caller's flag with the runtime set of flags we've built up over several functions. Let's refactor things to instead compute a baseline of flags as soon as possible which gets shared between multiple clients, in nbd_export_new(), and changing the signature for the callers to pass in a simpler bool rather than having to figure out flags. We can then get rid of the 'myflags' parameter to various functions, and instead refer to client for everything we need (we still have to perform a bitwise-OR for NBD_FLAG_SEND_DF during NBD_OPT_EXPORT_NAME and NBD_OPT_EXPORT_GO, but it's easier to see what is being computed). This lets us quit advertising senseless flags for read-only images, as well as making the next patch for exposing FAST_ZERO support easier to write. Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <20190823143726.27062-2-eblake@redhat.com> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> [eblake: improve commit message, update iotest 223]
2019-08-23 16:37:22 +02:00
uint16_t myflags;
/* Client sends:
[20 .. xx] export name (length bytes)
Server replies:
[ 0 .. 7] size
[ 8 .. 9] export flags
[10 .. 133] reserved (0) [unless no_zeroes]
*/
trace_nbd_negotiate_handle_export_name();
if (client->optlen > NBD_MAX_STRING_SIZE) {
error_setg(errp, "Bad length received");
return -EINVAL;
}
name = g_malloc(client->optlen + 1);
if (nbd_read(client->ioc, name, client->optlen, "export name", errp) < 0) {
return -EIO;
}
name[client->optlen] = '\0';
client->optlen = 0;
trace_nbd_negotiate_handle_export_name_request(name);
client->exp = nbd_export_find(name);
if (!client->exp) {
error_setg(errp, "export not found");
return -EINVAL;
}
nbd: Improve per-export flag handling in server When creating a read-only image, we are still advertising support for TRIM and WRITE_ZEROES to the client, even though the client should not be issuing those commands. But seeing this requires looking across multiple functions: All callers to nbd_export_new() passed a single flag based solely on whether the export allows writes. Later, we then pass a constant set of flags to nbd_negotiate_options() (namely, the set of flags which we always support, at least for writable images), which is then further dynamically modified with NBD_FLAG_SEND_DF based on client requests for structured options. Finally, when processing NBD_OPT_EXPORT_NAME or NBD_OPT_EXPORT_GO we bitwise-or the original caller's flag with the runtime set of flags we've built up over several functions. Let's refactor things to instead compute a baseline of flags as soon as possible which gets shared between multiple clients, in nbd_export_new(), and changing the signature for the callers to pass in a simpler bool rather than having to figure out flags. We can then get rid of the 'myflags' parameter to various functions, and instead refer to client for everything we need (we still have to perform a bitwise-OR for NBD_FLAG_SEND_DF during NBD_OPT_EXPORT_NAME and NBD_OPT_EXPORT_GO, but it's easier to see what is being computed). This lets us quit advertising senseless flags for read-only images, as well as making the next patch for exposing FAST_ZERO support easier to write. Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <20190823143726.27062-2-eblake@redhat.com> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> [eblake: improve commit message, update iotest 223]
2019-08-23 16:37:22 +02:00
myflags = client->exp->nbdflags;
if (client->structured_reply) {
myflags |= NBD_FLAG_SEND_DF;
}
trace_nbd_negotiate_new_style_size_flags(client->exp->size, myflags);
stq_be_p(buf, client->exp->size);
nbd: Improve per-export flag handling in server When creating a read-only image, we are still advertising support for TRIM and WRITE_ZEROES to the client, even though the client should not be issuing those commands. But seeing this requires looking across multiple functions: All callers to nbd_export_new() passed a single flag based solely on whether the export allows writes. Later, we then pass a constant set of flags to nbd_negotiate_options() (namely, the set of flags which we always support, at least for writable images), which is then further dynamically modified with NBD_FLAG_SEND_DF based on client requests for structured options. Finally, when processing NBD_OPT_EXPORT_NAME or NBD_OPT_EXPORT_GO we bitwise-or the original caller's flag with the runtime set of flags we've built up over several functions. Let's refactor things to instead compute a baseline of flags as soon as possible which gets shared between multiple clients, in nbd_export_new(), and changing the signature for the callers to pass in a simpler bool rather than having to figure out flags. We can then get rid of the 'myflags' parameter to various functions, and instead refer to client for everything we need (we still have to perform a bitwise-OR for NBD_FLAG_SEND_DF during NBD_OPT_EXPORT_NAME and NBD_OPT_EXPORT_GO, but it's easier to see what is being computed). This lets us quit advertising senseless flags for read-only images, as well as making the next patch for exposing FAST_ZERO support easier to write. Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <20190823143726.27062-2-eblake@redhat.com> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> [eblake: improve commit message, update iotest 223]
2019-08-23 16:37:22 +02:00
stw_be_p(buf + 8, myflags);
len = no_zeroes ? 10 : sizeof(buf);
ret = nbd_write(client->ioc, buf, len, errp);
if (ret < 0) {
error_prepend(errp, "write failed: ");
return ret;
}
QTAILQ_INSERT_TAIL(&client->exp->clients, client, next);
blk_exp_ref(&client->exp->common);
nbd_check_meta_export(client);
return 0;
}
/* Send a single NBD_REP_INFO, with a buffer @buf of @length bytes.
* The buffer does NOT include the info type prefix.
* Return -errno on error, 0 if ready to send more. */
static int nbd_negotiate_send_info(NBDClient *client,
uint16_t info, uint32_t length, void *buf,
Error **errp)
{
int rc;
trace_nbd_negotiate_send_info(info, nbd_info_lookup(info), length);
rc = nbd_negotiate_send_rep_len(client, NBD_REP_INFO,
sizeof(info) + length, errp);
if (rc < 0) {
return rc;
}
info = cpu_to_be16(info);
if (nbd_write(client->ioc, &info, sizeof(info), errp) < 0) {
return -EIO;
}
if (nbd_write(client->ioc, buf, length, errp) < 0) {
return -EIO;
}
return 0;
}
/* nbd_reject_length: Handle any unexpected payload.
* @fatal requests that we quit talking to the client, even if we are able
* to successfully send an error reply.
* Return:
* -errno transmission error occurred or @fatal was requested, errp is set
* 0 error message successfully sent to client, errp is not set
*/
static int nbd_reject_length(NBDClient *client, bool fatal, Error **errp)
{
int ret;
assert(client->optlen);
ret = nbd_opt_invalid(client, errp, "option '%s' has unexpected length",
nbd_opt_lookup(client->opt));
if (fatal && !ret) {
error_setg(errp, "option '%s' has unexpected length",
nbd_opt_lookup(client->opt));
return -EINVAL;
}
return ret;
}
/* Handle NBD_OPT_INFO and NBD_OPT_GO.
* Return -errno on error, 0 if ready for next option, and 1 to move
* into transmission phase. */
nbd: Improve per-export flag handling in server When creating a read-only image, we are still advertising support for TRIM and WRITE_ZEROES to the client, even though the client should not be issuing those commands. But seeing this requires looking across multiple functions: All callers to nbd_export_new() passed a single flag based solely on whether the export allows writes. Later, we then pass a constant set of flags to nbd_negotiate_options() (namely, the set of flags which we always support, at least for writable images), which is then further dynamically modified with NBD_FLAG_SEND_DF based on client requests for structured options. Finally, when processing NBD_OPT_EXPORT_NAME or NBD_OPT_EXPORT_GO we bitwise-or the original caller's flag with the runtime set of flags we've built up over several functions. Let's refactor things to instead compute a baseline of flags as soon as possible which gets shared between multiple clients, in nbd_export_new(), and changing the signature for the callers to pass in a simpler bool rather than having to figure out flags. We can then get rid of the 'myflags' parameter to various functions, and instead refer to client for everything we need (we still have to perform a bitwise-OR for NBD_FLAG_SEND_DF during NBD_OPT_EXPORT_NAME and NBD_OPT_EXPORT_GO, but it's easier to see what is being computed). This lets us quit advertising senseless flags for read-only images, as well as making the next patch for exposing FAST_ZERO support easier to write. Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <20190823143726.27062-2-eblake@redhat.com> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> [eblake: improve commit message, update iotest 223]
2019-08-23 16:37:22 +02:00
static int nbd_negotiate_handle_info(NBDClient *client, Error **errp)
{
int rc;
g_autofree char *name = NULL;
NBDExport *exp;
uint16_t requests;
uint16_t request;
uint32_t namelen = 0;
bool sendname = false;
bool blocksize = false;
uint32_t sizes[3];
char buf[sizeof(uint64_t) + sizeof(uint16_t)];
nbd/server: Trace client noncompliance on unaligned requests We've recently added traces for clients to flag server non-compliance; let's do the same for servers to flag client non-compliance. According to the spec, if the client requests NBD_INFO_BLOCK_SIZE, it is promising to send all requests aligned to those boundaries. Of course, if the client does not request NBD_INFO_BLOCK_SIZE, then it made no promises so we shouldn't flag anything; and because we are willing to handle clients that made no promises (the spec allows us to use NBD_REP_ERR_BLOCK_SIZE_REQD if we had been unwilling), we already have to handle unaligned requests (which the block layer already does on our behalf). So even though the spec allows us to return EINVAL for clients that promised to behave, it's easier to always answer unaligned requests. Still, flagging non-compliance can be useful in debugging a client that is trying to be maximally portable. Qemu as client used to have one spot where it sent non-compliant requests: if the server sends an unaligned reply to NBD_CMD_BLOCK_STATUS, and the client was iterating over the entire disk, the next request would start at that unaligned point; this was fixed in commit a39286dd when the client was taught to work around server non-compliance; but is equally fixed if the server is patched to not send unaligned replies in the first place (yes, qemu 4.0 as server still has few such bugs, although they will be patched in 4.1). Fortunately, I did not find any more spots where qemu as client was non-compliant. I was able to test the patch by using the following hack to convince qemu-io to run various unaligned commands, coupled with serving 512-byte alignment by intentionally omitting '-f raw' on the server while viewing server traces. | diff --git i/nbd/client.c w/nbd/client.c | index 427980bdd22..1858b2aac35 100644 | --- i/nbd/client.c | +++ w/nbd/client.c | @@ -449,6 +449,7 @@ static int nbd_opt_info_or_go(QIOChannel *ioc, uint32_t opt, | nbd_send_opt_abort(ioc); | return -1; | } | + info->min_block = 1;//hack | if (!is_power_of_2(info->min_block)) { | error_setg(errp, "server minimum block size %" PRIu32 | " is not a power of two", info->min_block); Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <20190403030526.12258-3-eblake@redhat.com> [eblake: address minor review nits] Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
2019-04-03 05:05:21 +02:00
uint32_t check_align = 0;
nbd: Improve per-export flag handling in server When creating a read-only image, we are still advertising support for TRIM and WRITE_ZEROES to the client, even though the client should not be issuing those commands. But seeing this requires looking across multiple functions: All callers to nbd_export_new() passed a single flag based solely on whether the export allows writes. Later, we then pass a constant set of flags to nbd_negotiate_options() (namely, the set of flags which we always support, at least for writable images), which is then further dynamically modified with NBD_FLAG_SEND_DF based on client requests for structured options. Finally, when processing NBD_OPT_EXPORT_NAME or NBD_OPT_EXPORT_GO we bitwise-or the original caller's flag with the runtime set of flags we've built up over several functions. Let's refactor things to instead compute a baseline of flags as soon as possible which gets shared between multiple clients, in nbd_export_new(), and changing the signature for the callers to pass in a simpler bool rather than having to figure out flags. We can then get rid of the 'myflags' parameter to various functions, and instead refer to client for everything we need (we still have to perform a bitwise-OR for NBD_FLAG_SEND_DF during NBD_OPT_EXPORT_NAME and NBD_OPT_EXPORT_GO, but it's easier to see what is being computed). This lets us quit advertising senseless flags for read-only images, as well as making the next patch for exposing FAST_ZERO support easier to write. Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <20190823143726.27062-2-eblake@redhat.com> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> [eblake: improve commit message, update iotest 223]
2019-08-23 16:37:22 +02:00
uint16_t myflags;
/* Client sends:
4 bytes: L, name length (can be 0)
L bytes: export name
2 bytes: N, number of requests (can be 0)
N * 2 bytes: N requests
*/
rc = nbd_opt_read_name(client, &name, &namelen, errp);
if (rc <= 0) {
return rc;
}
trace_nbd_negotiate_handle_export_name_request(name);
rc = nbd_opt_read(client, &requests, sizeof(requests), false, errp);
if (rc <= 0) {
return rc;
}
requests = be16_to_cpu(requests);
trace_nbd_negotiate_handle_info_requests(requests);
while (requests--) {
rc = nbd_opt_read(client, &request, sizeof(request), false, errp);
if (rc <= 0) {
return rc;
}
request = be16_to_cpu(request);
trace_nbd_negotiate_handle_info_request(request,
nbd_info_lookup(request));
/* We care about NBD_INFO_NAME and NBD_INFO_BLOCK_SIZE;
* everything else is either a request we don't know or
* something we send regardless of request */
switch (request) {
case NBD_INFO_NAME:
sendname = true;
break;
case NBD_INFO_BLOCK_SIZE:
blocksize = true;
break;
}
}
if (client->optlen) {
return nbd_reject_length(client, false, errp);
}
exp = nbd_export_find(name);
if (!exp) {
nbd/server: Avoid long error message assertions CVE-2020-10761 Ever since commit 36683283 (v2.8), the server code asserts that error strings sent to the client are well-formed per the protocol by not exceeding the maximum string length of 4096. At the time the server first started sending error messages, the assertion could not be triggered, because messages were completely under our control. However, over the years, we have added latent scenarios where a client could trigger the server to attempt an error message that would include the client's information if it passed other checks first: - requesting NBD_OPT_INFO/GO on an export name that is not present (commit 0cfae925 in v2.12 echoes the name) - requesting NBD_OPT_LIST/SET_META_CONTEXT on an export name that is not present (commit e7b1948d in v2.12 echoes the name) At the time, those were still safe because we flagged names larger than 256 bytes with a different message; but that changed in commit 93676c88 (v4.2) when we raised the name limit to 4096 to match the NBD string limit. (That commit also failed to change the magic number 4096 in nbd_negotiate_send_rep_err to the just-introduced named constant.) So with that commit, long client names appended to server text can now trigger the assertion, and thus be used as a denial of service attack against a server. As a mitigating factor, if the server requires TLS, the client cannot trigger the problematic paths unless it first supplies TLS credentials, and such trusted clients are less likely to try to intentionally crash the server. We may later want to further sanitize the user-supplied strings we place into our error messages, such as scrubbing out control characters, but that is less important to the CVE fix, so it can be a later patch to the new nbd_sanitize_name. Consideration was given to changing the assertion in nbd_negotiate_send_rep_verr to instead merely log a server error and truncate the message, to avoid leaving a latent path that could trigger a future CVE DoS on any new error message. However, this merely complicates the code for something that is already (correctly) flagging coding errors, and now that we are aware of the long message pitfall, we are less likely to introduce such errors in the future, which would make such error handling dead code. Reported-by: Xueqiang Wei <xuwei@redhat.com> CC: qemu-stable@nongnu.org Fixes: https://bugzilla.redhat.com/1843684 CVE-2020-10761 Fixes: 93676c88d7 Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <20200610163741.3745251-2-eblake@redhat.com> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
2020-06-08 20:26:37 +02:00
g_autofree char *sane_name = nbd_sanitize_name(name);
return nbd_negotiate_send_rep_err(client, NBD_REP_ERR_UNKNOWN,
errp, "export '%s' not present",
nbd/server: Avoid long error message assertions CVE-2020-10761 Ever since commit 36683283 (v2.8), the server code asserts that error strings sent to the client are well-formed per the protocol by not exceeding the maximum string length of 4096. At the time the server first started sending error messages, the assertion could not be triggered, because messages were completely under our control. However, over the years, we have added latent scenarios where a client could trigger the server to attempt an error message that would include the client's information if it passed other checks first: - requesting NBD_OPT_INFO/GO on an export name that is not present (commit 0cfae925 in v2.12 echoes the name) - requesting NBD_OPT_LIST/SET_META_CONTEXT on an export name that is not present (commit e7b1948d in v2.12 echoes the name) At the time, those were still safe because we flagged names larger than 256 bytes with a different message; but that changed in commit 93676c88 (v4.2) when we raised the name limit to 4096 to match the NBD string limit. (That commit also failed to change the magic number 4096 in nbd_negotiate_send_rep_err to the just-introduced named constant.) So with that commit, long client names appended to server text can now trigger the assertion, and thus be used as a denial of service attack against a server. As a mitigating factor, if the server requires TLS, the client cannot trigger the problematic paths unless it first supplies TLS credentials, and such trusted clients are less likely to try to intentionally crash the server. We may later want to further sanitize the user-supplied strings we place into our error messages, such as scrubbing out control characters, but that is less important to the CVE fix, so it can be a later patch to the new nbd_sanitize_name. Consideration was given to changing the assertion in nbd_negotiate_send_rep_verr to instead merely log a server error and truncate the message, to avoid leaving a latent path that could trigger a future CVE DoS on any new error message. However, this merely complicates the code for something that is already (correctly) flagging coding errors, and now that we are aware of the long message pitfall, we are less likely to introduce such errors in the future, which would make such error handling dead code. Reported-by: Xueqiang Wei <xuwei@redhat.com> CC: qemu-stable@nongnu.org Fixes: https://bugzilla.redhat.com/1843684 CVE-2020-10761 Fixes: 93676c88d7 Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <20200610163741.3745251-2-eblake@redhat.com> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
2020-06-08 20:26:37 +02:00
sane_name);
}
/* Don't bother sending NBD_INFO_NAME unless client requested it */
if (sendname) {
rc = nbd_negotiate_send_info(client, NBD_INFO_NAME, namelen, name,
errp);
if (rc < 0) {
return rc;
}
}
/* Send NBD_INFO_DESCRIPTION only if available, regardless of
* client request */
if (exp->description) {
size_t len = strlen(exp->description);
assert(len <= NBD_MAX_STRING_SIZE);
rc = nbd_negotiate_send_info(client, NBD_INFO_DESCRIPTION,
len, exp->description, errp);
if (rc < 0) {
return rc;
}
}
/* Send NBD_INFO_BLOCK_SIZE always, but tweak the minimum size
* according to whether the client requested it, and according to
* whether this is OPT_INFO or OPT_GO. */
nbd/server: Advertise actual minimum block size Both NBD_CMD_BLOCK_STATUS and structured NBD_CMD_READ will split their reply according to bdrv_block_status() boundaries. If the block device has a request_alignment smaller than 512, but we advertise a block alignment of 512 to the client, then this can result in the server reply violating client expectations by reporting a smaller region of the export than what the client is permitted to address (although this is less of an issue for qemu 4.0 clients, given recent client patches to overlook our non-compliance at EOF). Since it's always better to be strict in what we send, it is worth advertising the actual minimum block limit rather than blindly rounding it up to 512. Note that this patch is not foolproof - it is still possible to provoke non-compliant server behavior using: $ qemu-nbd --image-opts driver=blkdebug,align=512,image.driver=file,image.filename=/path/to/non-aligned-file That is arguably a bug in the blkdebug driver (it should never pass back block status smaller than its alignment, even if it has to make multiple bdrv_get_status calls and determine the least-common-denominator status among the group to return). It may also be possible to observe issues with a backing layer with smaller alignment than the active layer, although so far I have been unable to write a reliable iotest for that scenario (but again, an issue like that could be argued to be a bug in the block layer, or something where we need a flag to bdrv_block_status() to state whether the result must be aligned to the current layer's limits or can be subdivided for accuracy when chasing backing files). Anyways, as blkdebug is not normally used, and as this patch makes our server more interoperable with qemu 3.1 clients, it is worth applying now, even while we still work on a larger patch series for the 4.1 timeframe to have byte-accurate file lengths. Note that the iotests output changes - for 223 and 233, we can see the server's better granularity advertisement; and for 241, the three test cases have the following effects: - natural alignment: the server's smaller alignment is now advertised, and the hole reported at EOF is now the right result; we've gotten rid of the server's non-compliance - forced server alignment: the server still advertises 512 bytes, but still sends a mid-sector hole. This is still a server compliance bug, which needs to be fixed in the block layer in a later patch; output does not change because the client is already being tolerant of the non-compliance - forced client alignment: the server's smaller alignment means that the client now sees the server's status change mid-sector without any protocol violations, but the fact that the map shows an unaligned mid-sector hole is evidence of the block layer problems with aligned block status, to be fixed in a later patch Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <20190329042750.14704-7-eblake@redhat.com> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> [eblake: rebase to enhanced iotest 241 coverage]
2019-03-31 03:36:36 +02:00
/* minimum - 1 for back-compat, or actual if client will obey it. */
if (client->opt == NBD_OPT_INFO || blocksize) {
check_align = sizes[0] = blk_get_request_alignment(exp->common.blk);
nbd/server: Advertise actual minimum block size Both NBD_CMD_BLOCK_STATUS and structured NBD_CMD_READ will split their reply according to bdrv_block_status() boundaries. If the block device has a request_alignment smaller than 512, but we advertise a block alignment of 512 to the client, then this can result in the server reply violating client expectations by reporting a smaller region of the export than what the client is permitted to address (although this is less of an issue for qemu 4.0 clients, given recent client patches to overlook our non-compliance at EOF). Since it's always better to be strict in what we send, it is worth advertising the actual minimum block limit rather than blindly rounding it up to 512. Note that this patch is not foolproof - it is still possible to provoke non-compliant server behavior using: $ qemu-nbd --image-opts driver=blkdebug,align=512,image.driver=file,image.filename=/path/to/non-aligned-file That is arguably a bug in the blkdebug driver (it should never pass back block status smaller than its alignment, even if it has to make multiple bdrv_get_status calls and determine the least-common-denominator status among the group to return). It may also be possible to observe issues with a backing layer with smaller alignment than the active layer, although so far I have been unable to write a reliable iotest for that scenario (but again, an issue like that could be argued to be a bug in the block layer, or something where we need a flag to bdrv_block_status() to state whether the result must be aligned to the current layer's limits or can be subdivided for accuracy when chasing backing files). Anyways, as blkdebug is not normally used, and as this patch makes our server more interoperable with qemu 3.1 clients, it is worth applying now, even while we still work on a larger patch series for the 4.1 timeframe to have byte-accurate file lengths. Note that the iotests output changes - for 223 and 233, we can see the server's better granularity advertisement; and for 241, the three test cases have the following effects: - natural alignment: the server's smaller alignment is now advertised, and the hole reported at EOF is now the right result; we've gotten rid of the server's non-compliance - forced server alignment: the server still advertises 512 bytes, but still sends a mid-sector hole. This is still a server compliance bug, which needs to be fixed in the block layer in a later patch; output does not change because the client is already being tolerant of the non-compliance - forced client alignment: the server's smaller alignment means that the client now sees the server's status change mid-sector without any protocol violations, but the fact that the map shows an unaligned mid-sector hole is evidence of the block layer problems with aligned block status, to be fixed in a later patch Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <20190329042750.14704-7-eblake@redhat.com> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> [eblake: rebase to enhanced iotest 241 coverage]
2019-03-31 03:36:36 +02:00
} else {
sizes[0] = 1;
}
assert(sizes[0] <= NBD_MAX_BUFFER_SIZE);
/* preferred - Hard-code to 4096 for now.
* TODO: is blk_bs(blk)->bl.opt_transfer appropriate? */
nbd/server: Advertise actual minimum block size Both NBD_CMD_BLOCK_STATUS and structured NBD_CMD_READ will split their reply according to bdrv_block_status() boundaries. If the block device has a request_alignment smaller than 512, but we advertise a block alignment of 512 to the client, then this can result in the server reply violating client expectations by reporting a smaller region of the export than what the client is permitted to address (although this is less of an issue for qemu 4.0 clients, given recent client patches to overlook our non-compliance at EOF). Since it's always better to be strict in what we send, it is worth advertising the actual minimum block limit rather than blindly rounding it up to 512. Note that this patch is not foolproof - it is still possible to provoke non-compliant server behavior using: $ qemu-nbd --image-opts driver=blkdebug,align=512,image.driver=file,image.filename=/path/to/non-aligned-file That is arguably a bug in the blkdebug driver (it should never pass back block status smaller than its alignment, even if it has to make multiple bdrv_get_status calls and determine the least-common-denominator status among the group to return). It may also be possible to observe issues with a backing layer with smaller alignment than the active layer, although so far I have been unable to write a reliable iotest for that scenario (but again, an issue like that could be argued to be a bug in the block layer, or something where we need a flag to bdrv_block_status() to state whether the result must be aligned to the current layer's limits or can be subdivided for accuracy when chasing backing files). Anyways, as blkdebug is not normally used, and as this patch makes our server more interoperable with qemu 3.1 clients, it is worth applying now, even while we still work on a larger patch series for the 4.1 timeframe to have byte-accurate file lengths. Note that the iotests output changes - for 223 and 233, we can see the server's better granularity advertisement; and for 241, the three test cases have the following effects: - natural alignment: the server's smaller alignment is now advertised, and the hole reported at EOF is now the right result; we've gotten rid of the server's non-compliance - forced server alignment: the server still advertises 512 bytes, but still sends a mid-sector hole. This is still a server compliance bug, which needs to be fixed in the block layer in a later patch; output does not change because the client is already being tolerant of the non-compliance - forced client alignment: the server's smaller alignment means that the client now sees the server's status change mid-sector without any protocol violations, but the fact that the map shows an unaligned mid-sector hole is evidence of the block layer problems with aligned block status, to be fixed in a later patch Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <20190329042750.14704-7-eblake@redhat.com> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> [eblake: rebase to enhanced iotest 241 coverage]
2019-03-31 03:36:36 +02:00
sizes[1] = MAX(4096, sizes[0]);
/* maximum - At most 32M, but smaller as appropriate. */
sizes[2] = MIN(blk_get_max_transfer(exp->common.blk), NBD_MAX_BUFFER_SIZE);
trace_nbd_negotiate_handle_info_block_size(sizes[0], sizes[1], sizes[2]);
sizes[0] = cpu_to_be32(sizes[0]);
sizes[1] = cpu_to_be32(sizes[1]);
sizes[2] = cpu_to_be32(sizes[2]);
rc = nbd_negotiate_send_info(client, NBD_INFO_BLOCK_SIZE,
sizeof(sizes), sizes, errp);
if (rc < 0) {
return rc;
}
/* Send NBD_INFO_EXPORT always */
nbd: Improve per-export flag handling in server When creating a read-only image, we are still advertising support for TRIM and WRITE_ZEROES to the client, even though the client should not be issuing those commands. But seeing this requires looking across multiple functions: All callers to nbd_export_new() passed a single flag based solely on whether the export allows writes. Later, we then pass a constant set of flags to nbd_negotiate_options() (namely, the set of flags which we always support, at least for writable images), which is then further dynamically modified with NBD_FLAG_SEND_DF based on client requests for structured options. Finally, when processing NBD_OPT_EXPORT_NAME or NBD_OPT_EXPORT_GO we bitwise-or the original caller's flag with the runtime set of flags we've built up over several functions. Let's refactor things to instead compute a baseline of flags as soon as possible which gets shared between multiple clients, in nbd_export_new(), and changing the signature for the callers to pass in a simpler bool rather than having to figure out flags. We can then get rid of the 'myflags' parameter to various functions, and instead refer to client for everything we need (we still have to perform a bitwise-OR for NBD_FLAG_SEND_DF during NBD_OPT_EXPORT_NAME and NBD_OPT_EXPORT_GO, but it's easier to see what is being computed). This lets us quit advertising senseless flags for read-only images, as well as making the next patch for exposing FAST_ZERO support easier to write. Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <20190823143726.27062-2-eblake@redhat.com> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> [eblake: improve commit message, update iotest 223]
2019-08-23 16:37:22 +02:00
myflags = exp->nbdflags;
if (client->structured_reply) {
myflags |= NBD_FLAG_SEND_DF;
}
trace_nbd_negotiate_new_style_size_flags(exp->size, myflags);
stq_be_p(buf, exp->size);
nbd: Improve per-export flag handling in server When creating a read-only image, we are still advertising support for TRIM and WRITE_ZEROES to the client, even though the client should not be issuing those commands. But seeing this requires looking across multiple functions: All callers to nbd_export_new() passed a single flag based solely on whether the export allows writes. Later, we then pass a constant set of flags to nbd_negotiate_options() (namely, the set of flags which we always support, at least for writable images), which is then further dynamically modified with NBD_FLAG_SEND_DF based on client requests for structured options. Finally, when processing NBD_OPT_EXPORT_NAME or NBD_OPT_EXPORT_GO we bitwise-or the original caller's flag with the runtime set of flags we've built up over several functions. Let's refactor things to instead compute a baseline of flags as soon as possible which gets shared between multiple clients, in nbd_export_new(), and changing the signature for the callers to pass in a simpler bool rather than having to figure out flags. We can then get rid of the 'myflags' parameter to various functions, and instead refer to client for everything we need (we still have to perform a bitwise-OR for NBD_FLAG_SEND_DF during NBD_OPT_EXPORT_NAME and NBD_OPT_EXPORT_GO, but it's easier to see what is being computed). This lets us quit advertising senseless flags for read-only images, as well as making the next patch for exposing FAST_ZERO support easier to write. Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <20190823143726.27062-2-eblake@redhat.com> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> [eblake: improve commit message, update iotest 223]
2019-08-23 16:37:22 +02:00
stw_be_p(buf + 8, myflags);
rc = nbd_negotiate_send_info(client, NBD_INFO_EXPORT,
sizeof(buf), buf, errp);
if (rc < 0) {
return rc;
}
/*
* If the client is just asking for NBD_OPT_INFO, but forgot to
* request block sizes in a situation that would impact
* performance, then return an error. But for NBD_OPT_GO, we
* tolerate all clients, regardless of alignments.
*/
if (client->opt == NBD_OPT_INFO && !blocksize &&
blk_get_request_alignment(exp->common.blk) > 1) {
return nbd_negotiate_send_rep_err(client,
NBD_REP_ERR_BLOCK_SIZE_REQD,
errp,
"request NBD_INFO_BLOCK_SIZE to "
"use this export");
}
/* Final reply */
rc = nbd_negotiate_send_rep(client, NBD_REP_ACK, errp);
if (rc < 0) {
return rc;
}
if (client->opt == NBD_OPT_GO) {
client->exp = exp;
nbd/server: Trace client noncompliance on unaligned requests We've recently added traces for clients to flag server non-compliance; let's do the same for servers to flag client non-compliance. According to the spec, if the client requests NBD_INFO_BLOCK_SIZE, it is promising to send all requests aligned to those boundaries. Of course, if the client does not request NBD_INFO_BLOCK_SIZE, then it made no promises so we shouldn't flag anything; and because we are willing to handle clients that made no promises (the spec allows us to use NBD_REP_ERR_BLOCK_SIZE_REQD if we had been unwilling), we already have to handle unaligned requests (which the block layer already does on our behalf). So even though the spec allows us to return EINVAL for clients that promised to behave, it's easier to always answer unaligned requests. Still, flagging non-compliance can be useful in debugging a client that is trying to be maximally portable. Qemu as client used to have one spot where it sent non-compliant requests: if the server sends an unaligned reply to NBD_CMD_BLOCK_STATUS, and the client was iterating over the entire disk, the next request would start at that unaligned point; this was fixed in commit a39286dd when the client was taught to work around server non-compliance; but is equally fixed if the server is patched to not send unaligned replies in the first place (yes, qemu 4.0 as server still has few such bugs, although they will be patched in 4.1). Fortunately, I did not find any more spots where qemu as client was non-compliant. I was able to test the patch by using the following hack to convince qemu-io to run various unaligned commands, coupled with serving 512-byte alignment by intentionally omitting '-f raw' on the server while viewing server traces. | diff --git i/nbd/client.c w/nbd/client.c | index 427980bdd22..1858b2aac35 100644 | --- i/nbd/client.c | +++ w/nbd/client.c | @@ -449,6 +449,7 @@ static int nbd_opt_info_or_go(QIOChannel *ioc, uint32_t opt, | nbd_send_opt_abort(ioc); | return -1; | } | + info->min_block = 1;//hack | if (!is_power_of_2(info->min_block)) { | error_setg(errp, "server minimum block size %" PRIu32 | " is not a power of two", info->min_block); Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <20190403030526.12258-3-eblake@redhat.com> [eblake: address minor review nits] Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
2019-04-03 05:05:21 +02:00
client->check_align = check_align;
QTAILQ_INSERT_TAIL(&client->exp->clients, client, next);
blk_exp_ref(&client->exp->common);
nbd_check_meta_export(client);
rc = 1;
}
return rc;
}
/* Handle NBD_OPT_STARTTLS. Return NULL to drop connection, or else the
* new channel for all further (now-encrypted) communication. */
static QIOChannel *nbd_negotiate_handle_starttls(NBDClient *client,
Error **errp)
{
QIOChannel *ioc;
QIOChannelTLS *tioc;
struct NBDTLSHandshakeData data = { 0 };
assert(client->opt == NBD_OPT_STARTTLS);
trace_nbd_negotiate_handle_starttls();
ioc = client->ioc;
if (nbd_negotiate_send_rep(client, NBD_REP_ACK, errp) < 0) {
return NULL;
}
tioc = qio_channel_tls_new_server(ioc,
client->tlscreds,
qemu-nbd: add support for authorization of TLS clients Currently any client which can complete the TLS handshake is able to use the NBD server. The server admin can turn on the 'verify-peer' option for the x509 creds to require the client to provide a x509 certificate. This means the client will have to acquire a certificate from the CA before they are permitted to use the NBD server. This is still a fairly low bar to cross. This adds a '--tls-authz OBJECT-ID' option to the qemu-nbd command which takes the ID of a previously added 'QAuthZ' object instance. This will be used to validate the client's x509 distinguished name. Clients failing the authorization check will not be permitted to use the NBD server. For example to setup authorization that only allows connection from a client whose x509 certificate distinguished name is CN=laptop.example.com,O=Example Org,L=London,ST=London,C=GB escape the commas in the name and use: qemu-nbd --object tls-creds-x509,id=tls0,dir=/home/berrange/qemutls,\ endpoint=server,verify-peer=yes \ --object 'authz-simple,id=auth0,identity=CN=laptop.example.com,,\ O=Example Org,,L=London,,ST=London,,C=GB' \ --tls-creds tls0 \ --tls-authz authz0 \ ....other qemu-nbd args... NB: a real shell command line would not have leading whitespace after the line continuation, it is just included here for clarity. Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Message-Id: <20190227162035.18543-2-berrange@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> [eblake: split long line in --help text, tweak 233 to show that whitespace after ,, in identity= portion is actually okay] Signed-off-by: Eric Blake <eblake@redhat.com>
2019-02-27 17:20:33 +01:00
client->tlsauthz,
errp);
if (!tioc) {
return NULL;
}
qio_channel_set_name(QIO_CHANNEL(tioc), "nbd-server-tls");
trace_nbd_negotiate_handle_starttls_handshake();
data.loop = g_main_loop_new(g_main_context_default(), FALSE);
qio_channel_tls_handshake(tioc,
nbd_tls_handshake,
&data,
NULL,
NULL);
if (!data.complete) {
g_main_loop_run(data.loop);
}
g_main_loop_unref(data.loop);
if (data.error) {
object_unref(OBJECT(tioc));
error_propagate(errp, data.error);
return NULL;
}
return QIO_CHANNEL(tioc);
}
/* nbd_negotiate_send_meta_context
*
* Send one chunk of reply to NBD_OPT_{LIST,SET}_META_CONTEXT
*
* For NBD_OPT_LIST_META_CONTEXT @context_id is ignored, 0 is used instead.
*/
static int nbd_negotiate_send_meta_context(NBDClient *client,
const char *context,
uint32_t context_id,
Error **errp)
{
NBDOptionReplyMetaContext opt;
struct iovec iov[] = {
{.iov_base = &opt, .iov_len = sizeof(opt)},
{.iov_base = (void *)context, .iov_len = strlen(context)}
};
assert(iov[1].iov_len <= NBD_MAX_STRING_SIZE);
if (client->opt == NBD_OPT_LIST_META_CONTEXT) {
context_id = 0;
}
trace_nbd_negotiate_meta_query_reply(context, context_id);
set_be_option_rep(&opt.h, client->opt, NBD_REP_META_CONTEXT,
sizeof(opt) - sizeof(opt.h) + iov[1].iov_len);
stl_be_p(&opt.context_id, context_id);
return qio_channel_writev_all(client->ioc, iov, 2, errp) < 0 ? -EIO : 0;
}
/*
* Return true if @query matches @pattern, or if @query is empty when
* the @client is performing _LIST_.
*/
static bool nbd_meta_empty_or_pattern(NBDClient *client, const char *pattern,
const char *query)
{
if (!*query) {
trace_nbd_negotiate_meta_query_parse("empty");
return client->opt == NBD_OPT_LIST_META_CONTEXT;
}
if (strcmp(query, pattern) == 0) {
trace_nbd_negotiate_meta_query_parse(pattern);
return true;
}
trace_nbd_negotiate_meta_query_skip("pattern not matched");
return false;
}
/*
* Return true and adjust @str in place if it begins with @prefix.
*/
static bool nbd_strshift(const char **str, const char *prefix)
{
size_t len = strlen(prefix);
if (strncmp(*str, prefix, len) == 0) {
*str += len;
return true;
}
return false;
}
/* nbd_meta_base_query
*
* Handle queries to 'base' namespace. For now, only the base:allocation
* context is available. Return true if @query has been handled.
*/
static bool nbd_meta_base_query(NBDClient *client, NBDExportMetaContexts *meta,
const char *query)
{
if (!nbd_strshift(&query, "base:")) {
return false;
}
trace_nbd_negotiate_meta_query_parse("base:");
if (nbd_meta_empty_or_pattern(client, "allocation", query)) {
meta->base_allocation = true;
}
return true;
}
/* nbd_meta_qemu_query
*
* Handle queries to 'qemu' namespace. For now, only the qemu:dirty-bitmap:
* and qemu:allocation-depth contexts are available. Return true if @query
* has been handled.
*/
static bool nbd_meta_qemu_query(NBDClient *client, NBDExportMetaContexts *meta,
const char *query)
{
size_t i;
if (!nbd_strshift(&query, "qemu:")) {
return false;
}
trace_nbd_negotiate_meta_query_parse("qemu:");
if (!*query) {
if (client->opt == NBD_OPT_LIST_META_CONTEXT) {
meta->allocation_depth = meta->exp->allocation_depth;
if (meta->exp->nr_export_bitmaps) {
memset(meta->bitmaps, 1, meta->exp->nr_export_bitmaps);
}
}
trace_nbd_negotiate_meta_query_parse("empty");
return true;
}
if (strcmp(query, "allocation-depth") == 0) {
trace_nbd_negotiate_meta_query_parse("allocation-depth");
meta->allocation_depth = meta->exp->allocation_depth;
return true;
}
if (nbd_strshift(&query, "dirty-bitmap:")) {
trace_nbd_negotiate_meta_query_parse("dirty-bitmap:");
if (!*query) {
if (client->opt == NBD_OPT_LIST_META_CONTEXT &&
meta->exp->nr_export_bitmaps) {
memset(meta->bitmaps, 1, meta->exp->nr_export_bitmaps);
}
trace_nbd_negotiate_meta_query_parse("empty");
return true;
}
for (i = 0; i < meta->exp->nr_export_bitmaps; i++) {
const char *bm_name;
bm_name = bdrv_dirty_bitmap_name(meta->exp->export_bitmaps[i]);
if (strcmp(bm_name, query) == 0) {
meta->bitmaps[i] = true;
trace_nbd_negotiate_meta_query_parse(query);
return true;
}
}
trace_nbd_negotiate_meta_query_skip("no dirty-bitmap match");
return true;
}
trace_nbd_negotiate_meta_query_skip("unknown qemu context");
return true;
}
/* nbd_negotiate_meta_query
*
* Parse namespace name and call corresponding function to parse body of the
* query.
*
* The only supported namespaces are 'base' and 'qemu'.
*
* Return -errno on I/O error, 0 if option was completely handled by
* sending a reply about inconsistent lengths, or 1 on success. */
static int nbd_negotiate_meta_query(NBDClient *client,
NBDExportMetaContexts *meta, Error **errp)
{
int ret;
g_autofree char *query = NULL;
uint32_t len;
ret = nbd_opt_read(client, &len, sizeof(len), false, errp);
if (ret <= 0) {
return ret;
}
len = cpu_to_be32(len);
if (len > NBD_MAX_STRING_SIZE) {
trace_nbd_negotiate_meta_query_skip("length too long");
return nbd_opt_skip(client, len, errp);
}
query = g_malloc(len + 1);
ret = nbd_opt_read(client, query, len, true, errp);
if (ret <= 0) {
return ret;
}
query[len] = '\0';
if (nbd_meta_base_query(client, meta, query)) {
return 1;
}
if (nbd_meta_qemu_query(client, meta, query)) {
return 1;
}
trace_nbd_negotiate_meta_query_skip("unknown namespace");
return 1;
}
/* nbd_negotiate_meta_queries
* Handle NBD_OPT_LIST_META_CONTEXT and NBD_OPT_SET_META_CONTEXT
*
* Return -errno on I/O error, or 0 if option was completely handled. */
static int nbd_negotiate_meta_queries(NBDClient *client,
NBDExportMetaContexts *meta, Error **errp)
{
int ret;
g_autofree char *export_name = NULL;
/* Mark unused to work around https://bugs.llvm.org/show_bug.cgi?id=3888 */
g_autofree G_GNUC_UNUSED bool *bitmaps = NULL;
NBDExportMetaContexts local_meta = {0};
uint32_t nb_queries;
size_t i;
size_t count = 0;
if (client->opt == NBD_OPT_SET_META_CONTEXT && !client->structured_reply) {
return nbd_opt_invalid(client, errp,
"request option '%s' when structured reply "
"is not negotiated",
nbd_opt_lookup(client->opt));
}
if (client->opt == NBD_OPT_LIST_META_CONTEXT) {
/* Only change the caller's meta on SET. */
meta = &local_meta;
}
g_free(meta->bitmaps);
memset(meta, 0, sizeof(*meta));
ret = nbd_opt_read_name(client, &export_name, NULL, errp);
if (ret <= 0) {
return ret;
}
meta->exp = nbd_export_find(export_name);
if (meta->exp == NULL) {
nbd/server: Avoid long error message assertions CVE-2020-10761 Ever since commit 36683283 (v2.8), the server code asserts that error strings sent to the client are well-formed per the protocol by not exceeding the maximum string length of 4096. At the time the server first started sending error messages, the assertion could not be triggered, because messages were completely under our control. However, over the years, we have added latent scenarios where a client could trigger the server to attempt an error message that would include the client's information if it passed other checks first: - requesting NBD_OPT_INFO/GO on an export name that is not present (commit 0cfae925 in v2.12 echoes the name) - requesting NBD_OPT_LIST/SET_META_CONTEXT on an export name that is not present (commit e7b1948d in v2.12 echoes the name) At the time, those were still safe because we flagged names larger than 256 bytes with a different message; but that changed in commit 93676c88 (v4.2) when we raised the name limit to 4096 to match the NBD string limit. (That commit also failed to change the magic number 4096 in nbd_negotiate_send_rep_err to the just-introduced named constant.) So with that commit, long client names appended to server text can now trigger the assertion, and thus be used as a denial of service attack against a server. As a mitigating factor, if the server requires TLS, the client cannot trigger the problematic paths unless it first supplies TLS credentials, and such trusted clients are less likely to try to intentionally crash the server. We may later want to further sanitize the user-supplied strings we place into our error messages, such as scrubbing out control characters, but that is less important to the CVE fix, so it can be a later patch to the new nbd_sanitize_name. Consideration was given to changing the assertion in nbd_negotiate_send_rep_verr to instead merely log a server error and truncate the message, to avoid leaving a latent path that could trigger a future CVE DoS on any new error message. However, this merely complicates the code for something that is already (correctly) flagging coding errors, and now that we are aware of the long message pitfall, we are less likely to introduce such errors in the future, which would make such error handling dead code. Reported-by: Xueqiang Wei <xuwei@redhat.com> CC: qemu-stable@nongnu.org Fixes: https://bugzilla.redhat.com/1843684 CVE-2020-10761 Fixes: 93676c88d7 Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <20200610163741.3745251-2-eblake@redhat.com> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
2020-06-08 20:26:37 +02:00
g_autofree char *sane_name = nbd_sanitize_name(export_name);
return nbd_opt_drop(client, NBD_REP_ERR_UNKNOWN, errp,
nbd/server: Avoid long error message assertions CVE-2020-10761 Ever since commit 36683283 (v2.8), the server code asserts that error strings sent to the client are well-formed per the protocol by not exceeding the maximum string length of 4096. At the time the server first started sending error messages, the assertion could not be triggered, because messages were completely under our control. However, over the years, we have added latent scenarios where a client could trigger the server to attempt an error message that would include the client's information if it passed other checks first: - requesting NBD_OPT_INFO/GO on an export name that is not present (commit 0cfae925 in v2.12 echoes the name) - requesting NBD_OPT_LIST/SET_META_CONTEXT on an export name that is not present (commit e7b1948d in v2.12 echoes the name) At the time, those were still safe because we flagged names larger than 256 bytes with a different message; but that changed in commit 93676c88 (v4.2) when we raised the name limit to 4096 to match the NBD string limit. (That commit also failed to change the magic number 4096 in nbd_negotiate_send_rep_err to the just-introduced named constant.) So with that commit, long client names appended to server text can now trigger the assertion, and thus be used as a denial of service attack against a server. As a mitigating factor, if the server requires TLS, the client cannot trigger the problematic paths unless it first supplies TLS credentials, and such trusted clients are less likely to try to intentionally crash the server. We may later want to further sanitize the user-supplied strings we place into our error messages, such as scrubbing out control characters, but that is less important to the CVE fix, so it can be a later patch to the new nbd_sanitize_name. Consideration was given to changing the assertion in nbd_negotiate_send_rep_verr to instead merely log a server error and truncate the message, to avoid leaving a latent path that could trigger a future CVE DoS on any new error message. However, this merely complicates the code for something that is already (correctly) flagging coding errors, and now that we are aware of the long message pitfall, we are less likely to introduce such errors in the future, which would make such error handling dead code. Reported-by: Xueqiang Wei <xuwei@redhat.com> CC: qemu-stable@nongnu.org Fixes: https://bugzilla.redhat.com/1843684 CVE-2020-10761 Fixes: 93676c88d7 Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <20200610163741.3745251-2-eblake@redhat.com> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
2020-06-08 20:26:37 +02:00
"export '%s' not present", sane_name);
}
meta->bitmaps = g_new0(bool, meta->exp->nr_export_bitmaps);
if (client->opt == NBD_OPT_LIST_META_CONTEXT) {
bitmaps = meta->bitmaps;
}
ret = nbd_opt_read(client, &nb_queries, sizeof(nb_queries), false, errp);
if (ret <= 0) {
return ret;
}
nb_queries = cpu_to_be32(nb_queries);
trace_nbd_negotiate_meta_context(nbd_opt_lookup(client->opt),
export_name, nb_queries);
if (client->opt == NBD_OPT_LIST_META_CONTEXT && !nb_queries) {
/* enable all known contexts */
meta->base_allocation = true;
meta->allocation_depth = meta->exp->allocation_depth;
if (meta->exp->nr_export_bitmaps) {
memset(meta->bitmaps, 1, meta->exp->nr_export_bitmaps);
}
} else {
for (i = 0; i < nb_queries; ++i) {
ret = nbd_negotiate_meta_query(client, meta, errp);
if (ret <= 0) {
return ret;
}
}
}
if (meta->base_allocation) {
ret = nbd_negotiate_send_meta_context(client, "base:allocation",
NBD_META_ID_BASE_ALLOCATION,
errp);
if (ret < 0) {
return ret;
}
count++;
}
if (meta->allocation_depth) {
ret = nbd_negotiate_send_meta_context(client, "qemu:allocation-depth",
NBD_META_ID_ALLOCATION_DEPTH,
errp);
if (ret < 0) {
return ret;
}
count++;
}
for (i = 0; i < meta->exp->nr_export_bitmaps; i++) {
const char *bm_name;
g_autofree char *context = NULL;
if (!meta->bitmaps[i]) {
continue;
}
bm_name = bdrv_dirty_bitmap_name(meta->exp->export_bitmaps[i]);
context = g_strdup_printf("qemu:dirty-bitmap:%s", bm_name);
ret = nbd_negotiate_send_meta_context(client, context,
NBD_META_ID_DIRTY_BITMAP + i,
errp);
if (ret < 0) {
return ret;
}
count++;
}
ret = nbd_negotiate_send_rep(client, NBD_REP_ACK, errp);
if (ret == 0) {
meta->count = count;
}
return ret;
}
/* nbd_negotiate_options
* Process all NBD_OPT_* client option commands, during fixed newstyle
* negotiation.
* Return:
* -errno on error, errp is set
* 0 on successful negotiation, errp is not set
* 1 if client sent NBD_OPT_ABORT, i.e. on valid disconnect,
* errp is not set
*/
nbd: Improve per-export flag handling in server When creating a read-only image, we are still advertising support for TRIM and WRITE_ZEROES to the client, even though the client should not be issuing those commands. But seeing this requires looking across multiple functions: All callers to nbd_export_new() passed a single flag based solely on whether the export allows writes. Later, we then pass a constant set of flags to nbd_negotiate_options() (namely, the set of flags which we always support, at least for writable images), which is then further dynamically modified with NBD_FLAG_SEND_DF based on client requests for structured options. Finally, when processing NBD_OPT_EXPORT_NAME or NBD_OPT_EXPORT_GO we bitwise-or the original caller's flag with the runtime set of flags we've built up over several functions. Let's refactor things to instead compute a baseline of flags as soon as possible which gets shared between multiple clients, in nbd_export_new(), and changing the signature for the callers to pass in a simpler bool rather than having to figure out flags. We can then get rid of the 'myflags' parameter to various functions, and instead refer to client for everything we need (we still have to perform a bitwise-OR for NBD_FLAG_SEND_DF during NBD_OPT_EXPORT_NAME and NBD_OPT_EXPORT_GO, but it's easier to see what is being computed). This lets us quit advertising senseless flags for read-only images, as well as making the next patch for exposing FAST_ZERO support easier to write. Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <20190823143726.27062-2-eblake@redhat.com> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> [eblake: improve commit message, update iotest 223]
2019-08-23 16:37:22 +02:00
static int nbd_negotiate_options(NBDClient *client, Error **errp)
{
uint32_t flags;
bool fixedNewstyle = false;
bool no_zeroes = false;
/* Client sends:
[ 0 .. 3] client flags
Then we loop until NBD_OPT_EXPORT_NAME or NBD_OPT_GO:
[ 0 .. 7] NBD_OPTS_MAGIC
[ 8 .. 11] NBD option
[12 .. 15] Data length
... Rest of request
[ 0 .. 7] NBD_OPTS_MAGIC
[ 8 .. 11] Second NBD option
[12 .. 15] Data length
... Rest of request
*/
if (nbd_read32(client->ioc, &flags, "flags", errp) < 0) {
return -EIO;
}
trace_nbd_negotiate_options_flags(flags);
if (flags & NBD_FLAG_C_FIXED_NEWSTYLE) {
fixedNewstyle = true;
flags &= ~NBD_FLAG_C_FIXED_NEWSTYLE;
}
if (flags & NBD_FLAG_C_NO_ZEROES) {
no_zeroes = true;
flags &= ~NBD_FLAG_C_NO_ZEROES;
}
if (flags != 0) {
error_setg(errp, "Unknown client flags 0x%" PRIx32 " received", flags);
return -EINVAL;
}
while (1) {
int ret;
uint32_t option, length;
uint64_t magic;
if (nbd_read64(client->ioc, &magic, "opts magic", errp) < 0) {
return -EINVAL;
}
trace_nbd_negotiate_options_check_magic(magic);
if (magic != NBD_OPTS_MAGIC) {
error_setg(errp, "Bad magic received");
return -EINVAL;
}
if (nbd_read32(client->ioc, &option, "option", errp) < 0) {
return -EINVAL;
}
client->opt = option;
if (nbd_read32(client->ioc, &length, "option length", errp) < 0) {
return -EINVAL;
}
assert(!client->optlen);
client->optlen = length;
nbd/server: CVE-2017-15119 Reject options larger than 32M The NBD spec gives us permission to abruptly disconnect on clients that send outrageously large option requests, rather than having to spend the time reading to the end of the option. No real option request requires that much data anyways; and meanwhile, we already have the practice of abruptly dropping the connection on any client that sends NBD_CMD_WRITE with a payload larger than 32M. For comparison, nbdkit drops the connection on any request with more than 4096 bytes; however, that limit is probably too low (as the NBD spec states an export name can theoretically be up to 4096 bytes, which means a valid NBD_OPT_INFO could be even longer) - even if qemu doesn't permit exports longer than 256 bytes. It could be argued that a malicious client trying to get us to read nearly 4G of data on a bad request is a form of denial of service. In particular, if the server requires TLS, but a client that does not know the TLS credentials sends any option (other than NBD_OPT_STARTTLS or NBD_OPT_EXPORT_NAME) with a stated payload of nearly 4G, then the server was keeping the connection alive trying to read all the payload, tying up resources that it would rather be spending on a client that can get past the TLS handshake. Hence, this warranted a CVE. Present since at least 2.5 when handling known options, and made worse in 2.6 when fixing support for NBD_FLAG_C_FIXED_NEWSTYLE to handle unknown options. CC: qemu-stable@nongnu.org Signed-off-by: Eric Blake <eblake@redhat.com>
2017-11-22 23:25:16 +01:00
if (length > NBD_MAX_BUFFER_SIZE) {
error_setg(errp, "len (%" PRIu32" ) is larger than max len (%u)",
length, NBD_MAX_BUFFER_SIZE);
return -EINVAL;
}
trace_nbd_negotiate_options_check_option(option,
nbd_opt_lookup(option));
if (client->tlscreds &&
client->ioc == (QIOChannel *)client->sioc) {
QIOChannel *tioc;
if (!fixedNewstyle) {
error_setg(errp, "Unsupported option 0x%" PRIx32, option);
return -EINVAL;
}
switch (option) {
case NBD_OPT_STARTTLS:
if (length) {
/* Unconditionally drop the connection if the client
* can't start a TLS negotiation correctly */
return nbd_reject_length(client, true, errp);
}
tioc = nbd_negotiate_handle_starttls(client, errp);
if (!tioc) {
return -EIO;
}
ret = 0;
object_unref(OBJECT(client->ioc));
client->ioc = QIO_CHANNEL(tioc);
break;
case NBD_OPT_EXPORT_NAME:
/* No way to return an error to client, so drop connection */
error_setg(errp, "Option 0x%x not permitted before TLS",
option);
return -EINVAL;
default:
/* Let the client keep trying, unless they asked to
* quit. Always try to give an error back to the
* client; but when replying to OPT_ABORT, be aware
* that the client may hang up before receiving the
* error, in which case we are fine ignoring the
* resulting EPIPE. */
ret = nbd_opt_drop(client, NBD_REP_ERR_TLS_REQD,
option == NBD_OPT_ABORT ? NULL : errp,
"Option 0x%" PRIx32
" not permitted before TLS", option);
if (option == NBD_OPT_ABORT) {
return 1;
}
break;
}
} else if (fixedNewstyle) {
switch (option) {
case NBD_OPT_LIST:
if (length) {
ret = nbd_reject_length(client, false, errp);
} else {
ret = nbd_negotiate_handle_list(client, errp);
}
break;
case NBD_OPT_ABORT:
/* NBD spec says we must try to reply before
* disconnecting, but that we must also tolerate
* guests that don't wait for our reply. */
nbd_negotiate_send_rep(client, NBD_REP_ACK, NULL);
return 1;
case NBD_OPT_EXPORT_NAME:
nbd: Improve per-export flag handling in server When creating a read-only image, we are still advertising support for TRIM and WRITE_ZEROES to the client, even though the client should not be issuing those commands. But seeing this requires looking across multiple functions: All callers to nbd_export_new() passed a single flag based solely on whether the export allows writes. Later, we then pass a constant set of flags to nbd_negotiate_options() (namely, the set of flags which we always support, at least for writable images), which is then further dynamically modified with NBD_FLAG_SEND_DF based on client requests for structured options. Finally, when processing NBD_OPT_EXPORT_NAME or NBD_OPT_EXPORT_GO we bitwise-or the original caller's flag with the runtime set of flags we've built up over several functions. Let's refactor things to instead compute a baseline of flags as soon as possible which gets shared between multiple clients, in nbd_export_new(), and changing the signature for the callers to pass in a simpler bool rather than having to figure out flags. We can then get rid of the 'myflags' parameter to various functions, and instead refer to client for everything we need (we still have to perform a bitwise-OR for NBD_FLAG_SEND_DF during NBD_OPT_EXPORT_NAME and NBD_OPT_EXPORT_GO, but it's easier to see what is being computed). This lets us quit advertising senseless flags for read-only images, as well as making the next patch for exposing FAST_ZERO support easier to write. Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <20190823143726.27062-2-eblake@redhat.com> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> [eblake: improve commit message, update iotest 223]
2019-08-23 16:37:22 +02:00
return nbd_negotiate_handle_export_name(client, no_zeroes,
errp);
case NBD_OPT_INFO:
case NBD_OPT_GO:
nbd: Improve per-export flag handling in server When creating a read-only image, we are still advertising support for TRIM and WRITE_ZEROES to the client, even though the client should not be issuing those commands. But seeing this requires looking across multiple functions: All callers to nbd_export_new() passed a single flag based solely on whether the export allows writes. Later, we then pass a constant set of flags to nbd_negotiate_options() (namely, the set of flags which we always support, at least for writable images), which is then further dynamically modified with NBD_FLAG_SEND_DF based on client requests for structured options. Finally, when processing NBD_OPT_EXPORT_NAME or NBD_OPT_EXPORT_GO we bitwise-or the original caller's flag with the runtime set of flags we've built up over several functions. Let's refactor things to instead compute a baseline of flags as soon as possible which gets shared between multiple clients, in nbd_export_new(), and changing the signature for the callers to pass in a simpler bool rather than having to figure out flags. We can then get rid of the 'myflags' parameter to various functions, and instead refer to client for everything we need (we still have to perform a bitwise-OR for NBD_FLAG_SEND_DF during NBD_OPT_EXPORT_NAME and NBD_OPT_EXPORT_GO, but it's easier to see what is being computed). This lets us quit advertising senseless flags for read-only images, as well as making the next patch for exposing FAST_ZERO support easier to write. Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <20190823143726.27062-2-eblake@redhat.com> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> [eblake: improve commit message, update iotest 223]
2019-08-23 16:37:22 +02:00
ret = nbd_negotiate_handle_info(client, errp);
if (ret == 1) {
assert(option == NBD_OPT_GO);
return 0;
}
break;
case NBD_OPT_STARTTLS:
if (length) {
ret = nbd_reject_length(client, false, errp);
} else if (client->tlscreds) {
ret = nbd_negotiate_send_rep_err(client,
NBD_REP_ERR_INVALID, errp,
"TLS already enabled");
} else {
ret = nbd_negotiate_send_rep_err(client,
NBD_REP_ERR_POLICY, errp,
"TLS not configured");
}
break;
case NBD_OPT_STRUCTURED_REPLY:
if (length) {
ret = nbd_reject_length(client, false, errp);
} else if (client->structured_reply) {
ret = nbd_negotiate_send_rep_err(
client, NBD_REP_ERR_INVALID, errp,
"structured reply already negotiated");
} else {
ret = nbd_negotiate_send_rep(client, NBD_REP_ACK, errp);
client->structured_reply = true;
}
break;
case NBD_OPT_LIST_META_CONTEXT:
case NBD_OPT_SET_META_CONTEXT:
ret = nbd_negotiate_meta_queries(client, &client->export_meta,
errp);
break;
default:
ret = nbd_opt_drop(client, NBD_REP_ERR_UNSUP, errp,
"Unsupported option %" PRIu32 " (%s)",
option, nbd_opt_lookup(option));
break;
}
} else {
/*
* If broken new-style we should drop the connection
* for anything except NBD_OPT_EXPORT_NAME
*/
switch (option) {
case NBD_OPT_EXPORT_NAME:
nbd: Improve per-export flag handling in server When creating a read-only image, we are still advertising support for TRIM and WRITE_ZEROES to the client, even though the client should not be issuing those commands. But seeing this requires looking across multiple functions: All callers to nbd_export_new() passed a single flag based solely on whether the export allows writes. Later, we then pass a constant set of flags to nbd_negotiate_options() (namely, the set of flags which we always support, at least for writable images), which is then further dynamically modified with NBD_FLAG_SEND_DF based on client requests for structured options. Finally, when processing NBD_OPT_EXPORT_NAME or NBD_OPT_EXPORT_GO we bitwise-or the original caller's flag with the runtime set of flags we've built up over several functions. Let's refactor things to instead compute a baseline of flags as soon as possible which gets shared between multiple clients, in nbd_export_new(), and changing the signature for the callers to pass in a simpler bool rather than having to figure out flags. We can then get rid of the 'myflags' parameter to various functions, and instead refer to client for everything we need (we still have to perform a bitwise-OR for NBD_FLAG_SEND_DF during NBD_OPT_EXPORT_NAME and NBD_OPT_EXPORT_GO, but it's easier to see what is being computed). This lets us quit advertising senseless flags for read-only images, as well as making the next patch for exposing FAST_ZERO support easier to write. Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <20190823143726.27062-2-eblake@redhat.com> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> [eblake: improve commit message, update iotest 223]
2019-08-23 16:37:22 +02:00
return nbd_negotiate_handle_export_name(client, no_zeroes,
errp);
default:
error_setg(errp, "Unsupported option %" PRIu32 " (%s)",
option, nbd_opt_lookup(option));
return -EINVAL;
}
}
if (ret < 0) {
return ret;
}
}
}
/* nbd_negotiate
* Return:
* -errno on error, errp is set
* 0 on successful negotiation, errp is not set
* 1 if client sent NBD_OPT_ABORT, i.e. on valid disconnect,
* errp is not set
*/
static coroutine_fn int nbd_negotiate(NBDClient *client, Error **errp)
{
nbd: Use ERRP_GUARD() If we want to check error after errp-function call, we need to introduce local_err and then propagate it to errp. Instead, use the ERRP_GUARD() macro, benefits are: 1. No need of explicit error_propagate call 2. No need of explicit local_err variable: use errp directly 3. ERRP_GUARD() leaves errp as is if it's not NULL or &error_fatal, this means that we don't break error_abort (we'll abort on error_set, not on error_propagate) If we want to add some info to errp (by error_prepend() or error_append_hint()), we must use the ERRP_GUARD() macro. Otherwise, this info will not be added when errp == &error_fatal (the program will exit prior to the error_append_hint() or error_prepend() call). Fix several such cases, e.g. in nbd_read(). This commit is generated by command sed -n '/^Network Block Device (NBD)$/,/^$/{s/^F: //p}' \ MAINTAINERS | \ xargs git ls-files | grep '\.[hc]$' | \ xargs spatch \ --sp-file scripts/coccinelle/errp-guard.cocci \ --macro-file scripts/cocci-macro-file.h \ --in-place --no-show-diff --max-width 80 Reported-by: Kevin Wolf <kwolf@redhat.com> Reported-by: Greg Kurz <groug@kaod.org> Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> [Commit message tweaked] Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20200707165037.1026246-8-armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> [ERRP_AUTO_PROPAGATE() renamed to ERRP_GUARD(), and auto-propagated-errp.cocci to errp-guard.cocci. Commit message tweaked again.]
2020-07-07 18:50:36 +02:00
ERRP_GUARD();
char buf[NBD_OLDSTYLE_NEGOTIATE_SIZE] = "";
int ret;
/* Old style negotiation header, no room for options
[ 0 .. 7] passwd ("NBDMAGIC")
[ 8 .. 15] magic (NBD_CLIENT_MAGIC)
[16 .. 23] size
[24 .. 27] export flags (zero-extended)
[28 .. 151] reserved (0)
New style negotiation header, client can send options
[ 0 .. 7] passwd ("NBDMAGIC")
[ 8 .. 15] magic (NBD_OPTS_MAGIC)
[16 .. 17] server flags (0)
....options sent, ending in NBD_OPT_EXPORT_NAME or NBD_OPT_GO....
*/
qio_channel_set_blocking(client->ioc, false, NULL);
trace_nbd_negotiate_begin();
memcpy(buf, "NBDMAGIC", 8);
stq_be_p(buf + 8, NBD_OPTS_MAGIC);
stw_be_p(buf + 16, NBD_FLAG_FIXED_NEWSTYLE | NBD_FLAG_NO_ZEROES);
if (nbd_write(client->ioc, buf, 18, errp) < 0) {
error_prepend(errp, "write failed: ");
return -EINVAL;
}
nbd: Improve per-export flag handling in server When creating a read-only image, we are still advertising support for TRIM and WRITE_ZEROES to the client, even though the client should not be issuing those commands. But seeing this requires looking across multiple functions: All callers to nbd_export_new() passed a single flag based solely on whether the export allows writes. Later, we then pass a constant set of flags to nbd_negotiate_options() (namely, the set of flags which we always support, at least for writable images), which is then further dynamically modified with NBD_FLAG_SEND_DF based on client requests for structured options. Finally, when processing NBD_OPT_EXPORT_NAME or NBD_OPT_EXPORT_GO we bitwise-or the original caller's flag with the runtime set of flags we've built up over several functions. Let's refactor things to instead compute a baseline of flags as soon as possible which gets shared between multiple clients, in nbd_export_new(), and changing the signature for the callers to pass in a simpler bool rather than having to figure out flags. We can then get rid of the 'myflags' parameter to various functions, and instead refer to client for everything we need (we still have to perform a bitwise-OR for NBD_FLAG_SEND_DF during NBD_OPT_EXPORT_NAME and NBD_OPT_EXPORT_GO, but it's easier to see what is being computed). This lets us quit advertising senseless flags for read-only images, as well as making the next patch for exposing FAST_ZERO support easier to write. Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <20190823143726.27062-2-eblake@redhat.com> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> [eblake: improve commit message, update iotest 223]
2019-08-23 16:37:22 +02:00
ret = nbd_negotiate_options(client, errp);
if (ret != 0) {
if (ret < 0) {
error_prepend(errp, "option negotiation failed: ");
}
return ret;
}
/* Attach the channel to the same AioContext as the export */
if (client->exp && client->exp->common.ctx) {
qio_channel_attach_aio_context(client->ioc, client->exp->common.ctx);
}
assert(!client->optlen);
trace_nbd_negotiate_success();
return 0;
}
/* nbd_read_eof
* Tries to read @size bytes from @ioc. This is a local implementation of
* qio_channel_readv_all_eof. We have it here because we need it to be
* interruptible and to know when the coroutine is yielding.
* Returns 1 on success
* 0 on eof, when no data was read (errp is not set)
* negative errno on failure (errp is set)
*/
static inline int coroutine_fn
nbd_read_eof(NBDClient *client, void *buffer, size_t size, Error **errp)
{
bool partial = false;
assert(size);
while (size > 0) {
struct iovec iov = { .iov_base = buffer, .iov_len = size };
ssize_t len;
len = qio_channel_readv(client->ioc, &iov, 1, errp);
if (len == QIO_CHANNEL_ERR_BLOCK) {
client->read_yielding = true;
qio_channel_yield(client->ioc, G_IO_IN);
client->read_yielding = false;
if (client->quiescing) {
return -EAGAIN;
}
continue;
} else if (len < 0) {
return -EIO;
} else if (len == 0) {
if (partial) {
error_setg(errp,
"Unexpected end-of-file before all bytes were read");
return -EIO;
} else {
return 0;
}
}
partial = true;
size -= len;
buffer = (uint8_t *) buffer + len;
}
return 1;
}
static int nbd_receive_request(NBDClient *client, NBDRequest *request,
Error **errp)
{
uint8_t buf[NBD_REQUEST_SIZE];
uint32_t magic;
int ret;
ret = nbd_read_eof(client, buf, sizeof(buf), errp);
if (ret < 0) {
return ret;
}
nbd/server: Don't complain on certain client disconnects When a client disconnects abruptly, but did not have any pending requests (for example, when using nbdsh without calling h.shutdown), we used to output the following message: $ qemu-nbd -f raw file $ nbdsh -u 'nbd://localhost:10809' -c 'h.trim(1,0)' qemu-nbd: Disconnect client, due to: Failed to read request: Unexpected end-of-file before all bytes were read Then in commit f148ae7, we refactored nbd_receive_request() to use nbd_read_eof(); when this returns 0, we regressed into tracing uninitialized memory (if tracing is enabled) and reporting a less-specific: qemu-nbd: Disconnect client, due to: Request handling failed in intermediate state Note that with Unix sockets, we have yet another error message, unchanged by the 6.0 regression: $ qemu-nbd -k /tmp/sock -f raw file $ nbdsh -u 'nbd+unix:///?socket=/tmp/sock' -c 'h.trim(1,0)' qemu-nbd: Disconnect client, due to: Failed to send reply: Unable to write to socket: Broken pipe But in all cases, the error message goes away if the client performs a soft shutdown by using NBD_CMD_DISC, rather than a hard shutdown by abrupt disconnect: $ nbdsh -u 'nbd://localhost:10809' -c 'h.trim(1,0)' -c 'h.shutdown()' This patch fixes things to avoid uninitialized memory, and in general avoids warning about a client that does a hard shutdown when not in the middle of a packet. A client that aborts mid-request, or which does not read the full server's reply, can still result in warnings, but those are indeed much more unusual situations. CC: qemu-stable@nongnu.org Fixes: f148ae7d36 ("nbd/server: Quiesce coroutines on context switch", v6.0.0) Signed-off-by: Eric Blake <eblake@redhat.com> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> [eblake: defer unrelated typo fixes to later patch] Message-Id: <20211117170230.1128262-2-eblake@redhat.com> Signed-off-by: Eric Blake <eblake@redhat.com>
2021-11-17 18:02:29 +01:00
if (ret == 0) {
return -EIO;
}
/* Request
[ 0 .. 3] magic (NBD_REQUEST_MAGIC)
[ 4 .. 5] flags (NBD_CMD_FLAG_FUA, ...)
[ 6 .. 7] type (NBD_CMD_READ, ...)
[ 8 .. 15] handle
[16 .. 23] from
[24 .. 27] len
*/
magic = ldl_be_p(buf);
request->flags = lduw_be_p(buf + 4);
request->type = lduw_be_p(buf + 6);
request->handle = ldq_be_p(buf + 8);
request->from = ldq_be_p(buf + 16);
request->len = ldl_be_p(buf + 24);
trace_nbd_receive_request(magic, request->flags, request->type,
request->from, request->len);
if (magic != NBD_REQUEST_MAGIC) {
error_setg(errp, "invalid magic (got 0x%" PRIx32 ")", magic);
return -EINVAL;
}
return 0;
}
#define MAX_NBD_REQUESTS 16
void nbd_client_get(NBDClient *client)
{
client->refcount++;
}
void nbd_client_put(NBDClient *client)
{
if (--client->refcount == 0) {
/* The last reference should be dropped by client->close,
* which is called by client_close.
*/
assert(client->closing);
qio_channel_detach_aio_context(client->ioc);
object_unref(OBJECT(client->sioc));
object_unref(OBJECT(client->ioc));
if (client->tlscreds) {
object_unref(OBJECT(client->tlscreds));
}
qemu-nbd: add support for authorization of TLS clients Currently any client which can complete the TLS handshake is able to use the NBD server. The server admin can turn on the 'verify-peer' option for the x509 creds to require the client to provide a x509 certificate. This means the client will have to acquire a certificate from the CA before they are permitted to use the NBD server. This is still a fairly low bar to cross. This adds a '--tls-authz OBJECT-ID' option to the qemu-nbd command which takes the ID of a previously added 'QAuthZ' object instance. This will be used to validate the client's x509 distinguished name. Clients failing the authorization check will not be permitted to use the NBD server. For example to setup authorization that only allows connection from a client whose x509 certificate distinguished name is CN=laptop.example.com,O=Example Org,L=London,ST=London,C=GB escape the commas in the name and use: qemu-nbd --object tls-creds-x509,id=tls0,dir=/home/berrange/qemutls,\ endpoint=server,verify-peer=yes \ --object 'authz-simple,id=auth0,identity=CN=laptop.example.com,,\ O=Example Org,,L=London,,ST=London,,C=GB' \ --tls-creds tls0 \ --tls-authz authz0 \ ....other qemu-nbd args... NB: a real shell command line would not have leading whitespace after the line continuation, it is just included here for clarity. Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Message-Id: <20190227162035.18543-2-berrange@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> [eblake: split long line in --help text, tweak 233 to show that whitespace after ,, in identity= portion is actually okay] Signed-off-by: Eric Blake <eblake@redhat.com>
2019-02-27 17:20:33 +01:00
g_free(client->tlsauthz);
if (client->exp) {
QTAILQ_REMOVE(&client->exp->clients, client, next);
blk_exp_unref(&client->exp->common);
}
g_free(client->export_meta.bitmaps);
g_free(client);
}
}
nbd: Fix regression on resiliency to port scan Back in qemu 2.5, qemu-nbd was immune to port probes (a transient server would not quit, regardless of how many probe connections came and went, until a connection actually negotiated). But we broke that in commit ee7d7aa when removing the return value to nbd_client_new(), although that patch also introduced a bug causing an assertion failure on a client that fails negotiation. We then made it worse during refactoring in commit 1a6245a (a segfault before we could even assert); the (masked) assertion was cleaned up in d3780c2 (still in 2.6), and just recently we finally fixed the segfault ("nbd: Fully intialize client in case of failed negotiation"). But that still means that ever since we added TLS support to qemu-nbd, we have been vulnerable to an ill-timed port-scan being able to cause a denial of service by taking down qemu-nbd before a real client has a chance to connect. Since negotiation is now handled asynchronously via coroutines, we no longer have a synchronous point of return by re-adding a return value to nbd_client_new(). So this patch instead wires things up to pass the negotiation status through the close_fn callback function. Simple test across two terminals: $ qemu-nbd -f raw -p 30001 file $ nmap 127.0.0.1 -p 30001 && \ qemu-io -c 'r 0 512' -f raw nbd://localhost:30001 Note that this patch does not change what constitutes successful negotiation (thus, a client must enter transmission phase before that client can be considered as a reason to terminate the server when the connection ends). Perhaps we may want to tweak things in a later patch to also treat a client that uses NBD_OPT_ABORT as being a 'successful' negotiation (the client correctly talked the NBD protocol, and informed us it was not going to use our export after all), but that's a discussion for another day. Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1451614 Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <20170608222617.20376-1-eblake@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-06-09 00:26:17 +02:00
static void client_close(NBDClient *client, bool negotiated)
{
if (client->closing) {
return;
}
client->closing = true;
/* Force requests to finish. They will drop their own references,
* then we'll close the socket and free the NBDClient.
*/
qio_channel_shutdown(client->ioc, QIO_CHANNEL_SHUTDOWN_BOTH,
NULL);
/* Also tell the client, so that they release their reference. */
nbd: Fix regression on resiliency to port scan Back in qemu 2.5, qemu-nbd was immune to port probes (a transient server would not quit, regardless of how many probe connections came and went, until a connection actually negotiated). But we broke that in commit ee7d7aa when removing the return value to nbd_client_new(), although that patch also introduced a bug causing an assertion failure on a client that fails negotiation. We then made it worse during refactoring in commit 1a6245a (a segfault before we could even assert); the (masked) assertion was cleaned up in d3780c2 (still in 2.6), and just recently we finally fixed the segfault ("nbd: Fully intialize client in case of failed negotiation"). But that still means that ever since we added TLS support to qemu-nbd, we have been vulnerable to an ill-timed port-scan being able to cause a denial of service by taking down qemu-nbd before a real client has a chance to connect. Since negotiation is now handled asynchronously via coroutines, we no longer have a synchronous point of return by re-adding a return value to nbd_client_new(). So this patch instead wires things up to pass the negotiation status through the close_fn callback function. Simple test across two terminals: $ qemu-nbd -f raw -p 30001 file $ nmap 127.0.0.1 -p 30001 && \ qemu-io -c 'r 0 512' -f raw nbd://localhost:30001 Note that this patch does not change what constitutes successful negotiation (thus, a client must enter transmission phase before that client can be considered as a reason to terminate the server when the connection ends). Perhaps we may want to tweak things in a later patch to also treat a client that uses NBD_OPT_ABORT as being a 'successful' negotiation (the client correctly talked the NBD protocol, and informed us it was not going to use our export after all), but that's a discussion for another day. Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1451614 Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <20170608222617.20376-1-eblake@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-06-09 00:26:17 +02:00
if (client->close_fn) {
client->close_fn(client, negotiated);
}
}
static NBDRequestData *nbd_request_get(NBDClient *client)
{
NBDRequestData *req;
assert(client->nb_requests <= MAX_NBD_REQUESTS - 1);
client->nb_requests++;
req = g_new0(NBDRequestData, 1);
nbd_client_get(client);
req->client = client;
return req;
}
static void nbd_request_put(NBDRequestData *req)
{
NBDClient *client = req->client;
if (req->data) {
qemu_vfree(req->data);
}
g_free(req);
client->nb_requests--;
if (client->quiescing && client->nb_requests == 0) {
aio_wait_kick();
}
nbd_client_receive_next_request(client);
nbd_client_put(client);
}
static void blk_aio_attached(AioContext *ctx, void *opaque)
{
NBDExport *exp = opaque;
NBDClient *client;
trace_nbd_blk_aio_attached(exp->name, ctx);
exp->common.ctx = ctx;
QTAILQ_FOREACH(client, &exp->clients, next) {
qio_channel_attach_aio_context(client->ioc, ctx);
assert(client->nb_requests == 0);
assert(client->recv_coroutine == NULL);
assert(client->send_coroutine == NULL);
}
}
static void blk_aio_detach(void *opaque)
{
NBDExport *exp = opaque;
NBDClient *client;
trace_nbd_blk_aio_detach(exp->name, exp->common.ctx);
QTAILQ_FOREACH(client, &exp->clients, next) {
qio_channel_detach_aio_context(client->ioc);
}
exp->common.ctx = NULL;
}
static void nbd_drained_begin(void *opaque)
{
NBDExport *exp = opaque;
NBDClient *client;
QTAILQ_FOREACH(client, &exp->clients, next) {
client->quiescing = true;
}
}
static void nbd_drained_end(void *opaque)
{
NBDExport *exp = opaque;
NBDClient *client;
QTAILQ_FOREACH(client, &exp->clients, next) {
client->quiescing = false;
nbd_client_receive_next_request(client);
}
}
static bool nbd_drained_poll(void *opaque)
{
NBDExport *exp = opaque;
NBDClient *client;
QTAILQ_FOREACH(client, &exp->clients, next) {
if (client->nb_requests != 0) {
/*
* If there's a coroutine waiting for a request on nbd_read_eof()
* enter it here so we don't depend on the client to wake it up.
*/
if (client->recv_coroutine != NULL && client->read_yielding) {
qemu_aio_coroutine_enter(exp->common.ctx,
client->recv_coroutine);
}
return true;
}
}
return false;
}
static void nbd_eject_notifier(Notifier *n, void *data)
{
NBDExport *exp = container_of(n, NBDExport, eject_notifier);
blk_exp_request_shutdown(&exp->common);
}
void nbd_export_set_on_eject_blk(BlockExport *exp, BlockBackend *blk)
{
NBDExport *nbd_exp = container_of(exp, NBDExport, common);
assert(exp->drv == &blk_exp_nbd);
assert(nbd_exp->eject_notifier_blk == NULL);
blk_ref(blk);
nbd_exp->eject_notifier_blk = blk;
nbd_exp->eject_notifier.notify = nbd_eject_notifier;
blk_add_remove_bs_notifier(blk, &nbd_exp->eject_notifier);
}
static const BlockDevOps nbd_block_ops = {
.drained_begin = nbd_drained_begin,
.drained_end = nbd_drained_end,
.drained_poll = nbd_drained_poll,
};
static int nbd_export_create(BlockExport *blk_exp, BlockExportOptions *exp_args,
Error **errp)
{
NBDExport *exp = container_of(blk_exp, NBDExport, common);
BlockExportOptionsNbd *arg = &exp_args->u.nbd;
BlockBackend *blk = blk_exp->blk;
int64_t size;
uint64_t perm, shared_perm;
bool readonly = !exp_args->writable;
bool shared = !exp_args->writable;
strList *bitmaps;
size_t i;
int ret;
assert(exp_args->type == BLOCK_EXPORT_TYPE_NBD);
if (!nbd_server_is_running()) {
error_setg(errp, "NBD server not running");
return -EINVAL;
}
if (!arg->has_name) {
arg->name = exp_args->node_name;
}
if (strlen(arg->name) > NBD_MAX_STRING_SIZE) {
error_setg(errp, "export name '%s' too long", arg->name);
return -EINVAL;
}
if (arg->description && strlen(arg->description) > NBD_MAX_STRING_SIZE) {
error_setg(errp, "description '%s' too long", arg->description);
return -EINVAL;
}
if (nbd_export_find(arg->name)) {
error_setg(errp, "NBD server already has export named '%s'", arg->name);
return -EEXIST;
}
size = blk_getlength(blk);
if (size < 0) {
error_setg_errno(errp, -size,
"Failed to determine the NBD export's length");
return size;
}
/* Don't allow resize while the NBD server is running, otherwise we don't
* care what happens with the node. */
blk_get_perm(blk, &perm, &shared_perm);
ret = blk_set_perm(blk, perm, shared_perm & ~BLK_PERM_RESIZE, errp);
if (ret < 0) {
return ret;
}
QTAILQ_INIT(&exp->clients);
exp->name = g_strdup(arg->name);
exp->description = g_strdup(arg->description);
nbd: Improve per-export flag handling in server When creating a read-only image, we are still advertising support for TRIM and WRITE_ZEROES to the client, even though the client should not be issuing those commands. But seeing this requires looking across multiple functions: All callers to nbd_export_new() passed a single flag based solely on whether the export allows writes. Later, we then pass a constant set of flags to nbd_negotiate_options() (namely, the set of flags which we always support, at least for writable images), which is then further dynamically modified with NBD_FLAG_SEND_DF based on client requests for structured options. Finally, when processing NBD_OPT_EXPORT_NAME or NBD_OPT_EXPORT_GO we bitwise-or the original caller's flag with the runtime set of flags we've built up over several functions. Let's refactor things to instead compute a baseline of flags as soon as possible which gets shared between multiple clients, in nbd_export_new(), and changing the signature for the callers to pass in a simpler bool rather than having to figure out flags. We can then get rid of the 'myflags' parameter to various functions, and instead refer to client for everything we need (we still have to perform a bitwise-OR for NBD_FLAG_SEND_DF during NBD_OPT_EXPORT_NAME and NBD_OPT_EXPORT_GO, but it's easier to see what is being computed). This lets us quit advertising senseless flags for read-only images, as well as making the next patch for exposing FAST_ZERO support easier to write. Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <20190823143726.27062-2-eblake@redhat.com> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> [eblake: improve commit message, update iotest 223]
2019-08-23 16:37:22 +02:00
exp->nbdflags = (NBD_FLAG_HAS_FLAGS | NBD_FLAG_SEND_FLUSH |
NBD_FLAG_SEND_FUA | NBD_FLAG_SEND_CACHE);
if (readonly) {
exp->nbdflags |= NBD_FLAG_READ_ONLY;
if (shared) {
exp->nbdflags |= NBD_FLAG_CAN_MULTI_CONN;
}
} else {
exp->nbdflags |= (NBD_FLAG_SEND_TRIM | NBD_FLAG_SEND_WRITE_ZEROES |
NBD_FLAG_SEND_FAST_ZERO);
nbd: Improve per-export flag handling in server When creating a read-only image, we are still advertising support for TRIM and WRITE_ZEROES to the client, even though the client should not be issuing those commands. But seeing this requires looking across multiple functions: All callers to nbd_export_new() passed a single flag based solely on whether the export allows writes. Later, we then pass a constant set of flags to nbd_negotiate_options() (namely, the set of flags which we always support, at least for writable images), which is then further dynamically modified with NBD_FLAG_SEND_DF based on client requests for structured options. Finally, when processing NBD_OPT_EXPORT_NAME or NBD_OPT_EXPORT_GO we bitwise-or the original caller's flag with the runtime set of flags we've built up over several functions. Let's refactor things to instead compute a baseline of flags as soon as possible which gets shared between multiple clients, in nbd_export_new(), and changing the signature for the callers to pass in a simpler bool rather than having to figure out flags. We can then get rid of the 'myflags' parameter to various functions, and instead refer to client for everything we need (we still have to perform a bitwise-OR for NBD_FLAG_SEND_DF during NBD_OPT_EXPORT_NAME and NBD_OPT_EXPORT_GO, but it's easier to see what is being computed). This lets us quit advertising senseless flags for read-only images, as well as making the next patch for exposing FAST_ZERO support easier to write. Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <20190823143726.27062-2-eblake@redhat.com> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> [eblake: improve commit message, update iotest 223]
2019-08-23 16:37:22 +02:00
}
exp->size = QEMU_ALIGN_DOWN(size, BDRV_SECTOR_SIZE);
for (bitmaps = arg->bitmaps; bitmaps; bitmaps = bitmaps->next) {
exp->nr_export_bitmaps++;
}
exp->export_bitmaps = g_new0(BdrvDirtyBitmap *, exp->nr_export_bitmaps);
for (i = 0, bitmaps = arg->bitmaps; bitmaps;
i++, bitmaps = bitmaps->next) {
const char *bitmap = bitmaps->value;
BlockDriverState *bs = blk_bs(blk);
BdrvDirtyBitmap *bm = NULL;
while (bs) {
bm = bdrv_find_dirty_bitmap(bs, bitmap);
if (bm != NULL) {
break;
}
bs = bdrv_filter_or_cow_bs(bs);
}
if (bm == NULL) {
ret = -ENOENT;
error_setg(errp, "Bitmap '%s' is not found", bitmap);
goto fail;
}
if (bdrv_dirty_bitmap_check(bm, BDRV_BITMAP_ALLOW_RO, errp)) {
ret = -EINVAL;
goto fail;
}
nbd: Improve per-export flag handling in server When creating a read-only image, we are still advertising support for TRIM and WRITE_ZEROES to the client, even though the client should not be issuing those commands. But seeing this requires looking across multiple functions: All callers to nbd_export_new() passed a single flag based solely on whether the export allows writes. Later, we then pass a constant set of flags to nbd_negotiate_options() (namely, the set of flags which we always support, at least for writable images), which is then further dynamically modified with NBD_FLAG_SEND_DF based on client requests for structured options. Finally, when processing NBD_OPT_EXPORT_NAME or NBD_OPT_EXPORT_GO we bitwise-or the original caller's flag with the runtime set of flags we've built up over several functions. Let's refactor things to instead compute a baseline of flags as soon as possible which gets shared between multiple clients, in nbd_export_new(), and changing the signature for the callers to pass in a simpler bool rather than having to figure out flags. We can then get rid of the 'myflags' parameter to various functions, and instead refer to client for everything we need (we still have to perform a bitwise-OR for NBD_FLAG_SEND_DF during NBD_OPT_EXPORT_NAME and NBD_OPT_EXPORT_GO, but it's easier to see what is being computed). This lets us quit advertising senseless flags for read-only images, as well as making the next patch for exposing FAST_ZERO support easier to write. Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <20190823143726.27062-2-eblake@redhat.com> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> [eblake: improve commit message, update iotest 223]
2019-08-23 16:37:22 +02:00
if (readonly && bdrv_is_writable(bs) &&
bdrv_dirty_bitmap_enabled(bm)) {
ret = -EINVAL;
error_setg(errp,
"Enabled bitmap '%s' incompatible with readonly export",
bitmap);
goto fail;
}
exp->export_bitmaps[i] = bm;
assert(strlen(bitmap) <= BDRV_BITMAP_MAX_NAME_SIZE);
}
/* Mark bitmaps busy in a separate loop, to simplify roll-back concerns. */
for (i = 0; i < exp->nr_export_bitmaps; i++) {
bdrv_dirty_bitmap_set_busy(exp->export_bitmaps[i], true);
}
exp->allocation_depth = arg->allocation_depth;
/*
* We need to inhibit request queuing in the block layer to ensure we can
* be properly quiesced when entering a drained section, as our coroutines
* servicing pending requests might enter blk_pread().
*/
blk_set_disable_request_queuing(blk, true);
blk_add_aio_context_notifier(blk, blk_aio_attached, blk_aio_detach, exp);
blk_set_dev_ops(blk, &nbd_block_ops, exp);
nbd: Merge nbd_export_set_name into nbd_export_new The existing NBD code had a weird split where nbd_export_new() created an export but did not add it to the list of exported names until a later nbd_export_set_name() came along and grabbed a second reference on the object; later, the first call to nbd_export_close() drops the second reference while removing the export from the list. This is in part because the QAPI NbdServerRemoveNode enum documents the possibility of adding a mode where we could do a soft disconnect: preventing new clients, but waiting for existing clients to gracefully quit, based on the mode used when calling nbd_export_close(). But in spite of all that, note that we never change the name of an NBD export while it is exposed, which means it is easier to just inline the process of setting the name as part of creating the export. Inline the contents of nbd_export_set_name() and nbd_export_set_description() into the two points in an export lifecycle where they matter, then adjust both callers to pass the name up front. Note that for creation, all callers pass a non-NULL name, (passing NULL at creation was for old style servers, but we removed support for that in commit 7f7dfe2a), so we can add an assert and do things unconditionally; but for cleanup, because of the dual nature of nbd_export_close(), we still have to be careful to avoid use-after-free. Along the way, add a comment reminding ourselves of the potential of adding a middle mode disconnect. Signed-off-by: Eric Blake <eblake@redhat.com> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Message-Id: <20190111194720.15671-5-eblake@redhat.com>
2019-01-11 20:47:16 +01:00
QTAILQ_INSERT_TAIL(&exports, exp, next);
return 0;
fail:
g_free(exp->export_bitmaps);
nbd: Merge nbd_export_set_name into nbd_export_new The existing NBD code had a weird split where nbd_export_new() created an export but did not add it to the list of exported names until a later nbd_export_set_name() came along and grabbed a second reference on the object; later, the first call to nbd_export_close() drops the second reference while removing the export from the list. This is in part because the QAPI NbdServerRemoveNode enum documents the possibility of adding a mode where we could do a soft disconnect: preventing new clients, but waiting for existing clients to gracefully quit, based on the mode used when calling nbd_export_close(). But in spite of all that, note that we never change the name of an NBD export while it is exposed, which means it is easier to just inline the process of setting the name as part of creating the export. Inline the contents of nbd_export_set_name() and nbd_export_set_description() into the two points in an export lifecycle where they matter, then adjust both callers to pass the name up front. Note that for creation, all callers pass a non-NULL name, (passing NULL at creation was for old style servers, but we removed support for that in commit 7f7dfe2a), so we can add an assert and do things unconditionally; but for cleanup, because of the dual nature of nbd_export_close(), we still have to be careful to avoid use-after-free. Along the way, add a comment reminding ourselves of the potential of adding a middle mode disconnect. Signed-off-by: Eric Blake <eblake@redhat.com> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Message-Id: <20190111194720.15671-5-eblake@redhat.com>
2019-01-11 20:47:16 +01:00
g_free(exp->name);
g_free(exp->description);
return ret;
}
NBDExport *nbd_export_find(const char *name)
{
NBDExport *exp;
QTAILQ_FOREACH(exp, &exports, next) {
if (strcmp(name, exp->name) == 0) {
return exp;
}
}
return NULL;
}
AioContext *
nbd_export_aio_context(NBDExport *exp)
{
return exp->common.ctx;
}
static void nbd_export_request_shutdown(BlockExport *blk_exp)
{
NBDExport *exp = container_of(blk_exp, NBDExport, common);
NBDClient *client, *next;
blk_exp_ref(&exp->common);
nbd: Merge nbd_export_set_name into nbd_export_new The existing NBD code had a weird split where nbd_export_new() created an export but did not add it to the list of exported names until a later nbd_export_set_name() came along and grabbed a second reference on the object; later, the first call to nbd_export_close() drops the second reference while removing the export from the list. This is in part because the QAPI NbdServerRemoveNode enum documents the possibility of adding a mode where we could do a soft disconnect: preventing new clients, but waiting for existing clients to gracefully quit, based on the mode used when calling nbd_export_close(). But in spite of all that, note that we never change the name of an NBD export while it is exposed, which means it is easier to just inline the process of setting the name as part of creating the export. Inline the contents of nbd_export_set_name() and nbd_export_set_description() into the two points in an export lifecycle where they matter, then adjust both callers to pass the name up front. Note that for creation, all callers pass a non-NULL name, (passing NULL at creation was for old style servers, but we removed support for that in commit 7f7dfe2a), so we can add an assert and do things unconditionally; but for cleanup, because of the dual nature of nbd_export_close(), we still have to be careful to avoid use-after-free. Along the way, add a comment reminding ourselves of the potential of adding a middle mode disconnect. Signed-off-by: Eric Blake <eblake@redhat.com> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Message-Id: <20190111194720.15671-5-eblake@redhat.com>
2019-01-11 20:47:16 +01:00
/*
* TODO: Should we expand QMP NbdServerRemoveNode enum to allow a
* close mode that stops advertising the export to new clients but
* still permits existing clients to run to completion? Because of
* that possibility, nbd_export_close() can be called more than
* once on an export.
*/
QTAILQ_FOREACH_SAFE(client, &exp->clients, next, next) {
nbd: Fix regression on resiliency to port scan Back in qemu 2.5, qemu-nbd was immune to port probes (a transient server would not quit, regardless of how many probe connections came and went, until a connection actually negotiated). But we broke that in commit ee7d7aa when removing the return value to nbd_client_new(), although that patch also introduced a bug causing an assertion failure on a client that fails negotiation. We then made it worse during refactoring in commit 1a6245a (a segfault before we could even assert); the (masked) assertion was cleaned up in d3780c2 (still in 2.6), and just recently we finally fixed the segfault ("nbd: Fully intialize client in case of failed negotiation"). But that still means that ever since we added TLS support to qemu-nbd, we have been vulnerable to an ill-timed port-scan being able to cause a denial of service by taking down qemu-nbd before a real client has a chance to connect. Since negotiation is now handled asynchronously via coroutines, we no longer have a synchronous point of return by re-adding a return value to nbd_client_new(). So this patch instead wires things up to pass the negotiation status through the close_fn callback function. Simple test across two terminals: $ qemu-nbd -f raw -p 30001 file $ nmap 127.0.0.1 -p 30001 && \ qemu-io -c 'r 0 512' -f raw nbd://localhost:30001 Note that this patch does not change what constitutes successful negotiation (thus, a client must enter transmission phase before that client can be considered as a reason to terminate the server when the connection ends). Perhaps we may want to tweak things in a later patch to also treat a client that uses NBD_OPT_ABORT as being a 'successful' negotiation (the client correctly talked the NBD protocol, and informed us it was not going to use our export after all), but that's a discussion for another day. Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1451614 Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <20170608222617.20376-1-eblake@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-06-09 00:26:17 +02:00
client_close(client, true);
}
nbd: Merge nbd_export_set_name into nbd_export_new The existing NBD code had a weird split where nbd_export_new() created an export but did not add it to the list of exported names until a later nbd_export_set_name() came along and grabbed a second reference on the object; later, the first call to nbd_export_close() drops the second reference while removing the export from the list. This is in part because the QAPI NbdServerRemoveNode enum documents the possibility of adding a mode where we could do a soft disconnect: preventing new clients, but waiting for existing clients to gracefully quit, based on the mode used when calling nbd_export_close(). But in spite of all that, note that we never change the name of an NBD export while it is exposed, which means it is easier to just inline the process of setting the name as part of creating the export. Inline the contents of nbd_export_set_name() and nbd_export_set_description() into the two points in an export lifecycle where they matter, then adjust both callers to pass the name up front. Note that for creation, all callers pass a non-NULL name, (passing NULL at creation was for old style servers, but we removed support for that in commit 7f7dfe2a), so we can add an assert and do things unconditionally; but for cleanup, because of the dual nature of nbd_export_close(), we still have to be careful to avoid use-after-free. Along the way, add a comment reminding ourselves of the potential of adding a middle mode disconnect. Signed-off-by: Eric Blake <eblake@redhat.com> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Message-Id: <20190111194720.15671-5-eblake@redhat.com>
2019-01-11 20:47:16 +01:00
if (exp->name) {
g_free(exp->name);
exp->name = NULL;
QTAILQ_REMOVE(&exports, exp, next);
}
blk_exp_unref(&exp->common);
}
static void nbd_export_delete(BlockExport *blk_exp)
{
size_t i;
NBDExport *exp = container_of(blk_exp, NBDExport, common);
assert(exp->name == NULL);
assert(QTAILQ_EMPTY(&exp->clients));
g_free(exp->description);
exp->description = NULL;
if (exp->common.blk) {
if (exp->eject_notifier_blk) {
notifier_remove(&exp->eject_notifier);
blk_unref(exp->eject_notifier_blk);
}
blk_remove_aio_context_notifier(exp->common.blk, blk_aio_attached,
blk_aio_detach, exp);
blk_set_disable_request_queuing(exp->common.blk, false);
}
for (i = 0; i < exp->nr_export_bitmaps; i++) {
bdrv_dirty_bitmap_set_busy(exp->export_bitmaps[i], false);
}
}
const BlockExportDriver blk_exp_nbd = {
.type = BLOCK_EXPORT_TYPE_NBD,
.instance_size = sizeof(NBDExport),
.create = nbd_export_create,
.delete = nbd_export_delete,
.request_shutdown = nbd_export_request_shutdown,
};
static int coroutine_fn nbd_co_send_iov(NBDClient *client, struct iovec *iov,
unsigned niov, Error **errp)
{
int ret;
g_assert(qemu_in_coroutine());
qemu_co_mutex_lock(&client->send_lock);
client->send_coroutine = qemu_coroutine_self();
ret = qio_channel_writev_all(client->ioc, iov, niov, errp) < 0 ? -EIO : 0;
client->send_coroutine = NULL;
qemu_co_mutex_unlock(&client->send_lock);
return ret;
}
static inline void set_be_simple_reply(NBDSimpleReply *reply, uint64_t error,
uint64_t handle)
{
stl_be_p(&reply->magic, NBD_SIMPLE_REPLY_MAGIC);
stl_be_p(&reply->error, error);
stq_be_p(&reply->handle, handle);
}
static int nbd_co_send_simple_reply(NBDClient *client,
uint64_t handle,
uint32_t error,
void *data,
size_t len,
Error **errp)
{
NBDSimpleReply reply;
int nbd_err = system_errno_to_nbd_errno(error);
struct iovec iov[] = {
{.iov_base = &reply, .iov_len = sizeof(reply)},
{.iov_base = data, .iov_len = len}
};
trace_nbd_co_send_simple_reply(handle, nbd_err, nbd_err_lookup(nbd_err),
len);
set_be_simple_reply(&reply, nbd_err, handle);
return nbd_co_send_iov(client, iov, len ? 2 : 1, errp);
}
static inline void set_be_chunk(NBDStructuredReplyChunk *chunk, uint16_t flags,
uint16_t type, uint64_t handle, uint32_t length)
{
stl_be_p(&chunk->magic, NBD_STRUCTURED_REPLY_MAGIC);
stw_be_p(&chunk->flags, flags);
stw_be_p(&chunk->type, type);
stq_be_p(&chunk->handle, handle);
stl_be_p(&chunk->length, length);
}
static int coroutine_fn nbd_co_send_structured_done(NBDClient *client,
uint64_t handle,
Error **errp)
{
NBDStructuredReplyChunk chunk;
struct iovec iov[] = {
{.iov_base = &chunk, .iov_len = sizeof(chunk)},
};
trace_nbd_co_send_structured_done(handle);
set_be_chunk(&chunk, NBD_REPLY_FLAG_DONE, NBD_REPLY_TYPE_NONE, handle, 0);
return nbd_co_send_iov(client, iov, 1, errp);
}
static int coroutine_fn nbd_co_send_structured_read(NBDClient *client,
uint64_t handle,
uint64_t offset,
void *data,
size_t size,
bool final,
Error **errp)
{
NBDStructuredReadData chunk;
struct iovec iov[] = {
{.iov_base = &chunk, .iov_len = sizeof(chunk)},
{.iov_base = data, .iov_len = size}
};
assert(size);
trace_nbd_co_send_structured_read(handle, offset, data, size);
set_be_chunk(&chunk.h, final ? NBD_REPLY_FLAG_DONE : 0,
NBD_REPLY_TYPE_OFFSET_DATA, handle,
sizeof(chunk) - sizeof(chunk.h) + size);
stq_be_p(&chunk.offset, offset);
return nbd_co_send_iov(client, iov, 2, errp);
}
static int coroutine_fn nbd_co_send_structured_error(NBDClient *client,
uint64_t handle,
uint32_t error,
const char *msg,
Error **errp)
{
NBDStructuredError chunk;
int nbd_err = system_errno_to_nbd_errno(error);
struct iovec iov[] = {
{.iov_base = &chunk, .iov_len = sizeof(chunk)},
{.iov_base = (char *)msg, .iov_len = msg ? strlen(msg) : 0},
};
assert(nbd_err);
trace_nbd_co_send_structured_error(handle, nbd_err,
nbd_err_lookup(nbd_err), msg ? msg : "");
set_be_chunk(&chunk.h, NBD_REPLY_FLAG_DONE, NBD_REPLY_TYPE_ERROR, handle,
sizeof(chunk) - sizeof(chunk.h) + iov[1].iov_len);
stl_be_p(&chunk.error, nbd_err);
stw_be_p(&chunk.message_length, iov[1].iov_len);
return nbd_co_send_iov(client, iov, 1 + !!iov[1].iov_len, errp);
}
/* Do a sparse read and send the structured reply to the client.
* Returns -errno if sending fails. bdrv_block_status_above() failure is
* reported to the client, at which point this function succeeds.
*/
static int coroutine_fn nbd_co_send_sparse_read(NBDClient *client,
uint64_t handle,
uint64_t offset,
uint8_t *data,
size_t size,
Error **errp)
{
int ret = 0;
NBDExport *exp = client->exp;
size_t progress = 0;
while (progress < size) {
int64_t pnum;
int status = bdrv_block_status_above(blk_bs(exp->common.blk), NULL,
offset + progress,
size - progress, &pnum, NULL,
NULL);
bool final;
if (status < 0) {
char *msg = g_strdup_printf("unable to check for holes: %s",
strerror(-status));
ret = nbd_co_send_structured_error(client, handle, -status, msg,
errp);
g_free(msg);
return ret;
}
assert(pnum && pnum <= size - progress);
final = progress + pnum == size;
if (status & BDRV_BLOCK_ZERO) {
NBDStructuredReadHole chunk;
struct iovec iov[] = {
{.iov_base = &chunk, .iov_len = sizeof(chunk)},
};
trace_nbd_co_send_structured_read_hole(handle, offset + progress,
pnum);
set_be_chunk(&chunk.h, final ? NBD_REPLY_FLAG_DONE : 0,
NBD_REPLY_TYPE_OFFSET_HOLE,
handle, sizeof(chunk) - sizeof(chunk.h));
stq_be_p(&chunk.offset, offset + progress);
stl_be_p(&chunk.length, pnum);
ret = nbd_co_send_iov(client, iov, 1, errp);
} else {
ret = blk_pread(exp->common.blk, offset + progress,
data + progress, pnum);
if (ret < 0) {
error_setg_errno(errp, -ret, "reading from file failed");
break;
}
ret = nbd_co_send_structured_read(client, handle, offset + progress,
data + progress, pnum, final,
errp);
}
if (ret < 0) {
break;
}
progress += pnum;
}
return ret;
}
typedef struct NBDExtentArray {
NBDExtent *extents;
unsigned int nb_alloc;
unsigned int count;
uint64_t total_length;
bool can_add;
bool converted_to_be;
} NBDExtentArray;
static NBDExtentArray *nbd_extent_array_new(unsigned int nb_alloc)
{
NBDExtentArray *ea = g_new0(NBDExtentArray, 1);
ea->nb_alloc = nb_alloc;
ea->extents = g_new(NBDExtent, nb_alloc);
ea->can_add = true;
return ea;
}
static void nbd_extent_array_free(NBDExtentArray *ea)
{
g_free(ea->extents);
g_free(ea);
}
G_DEFINE_AUTOPTR_CLEANUP_FUNC(NBDExtentArray, nbd_extent_array_free);
/* Further modifications of the array after conversion are abandoned */
static void nbd_extent_array_convert_to_be(NBDExtentArray *ea)
{
int i;
assert(!ea->converted_to_be);
ea->can_add = false;
ea->converted_to_be = true;
for (i = 0; i < ea->count; i++) {
ea->extents[i].flags = cpu_to_be32(ea->extents[i].flags);
ea->extents[i].length = cpu_to_be32(ea->extents[i].length);
}
}
/*
* Add extent to NBDExtentArray. If extent can't be added (no available space),
* return -1.
* For safety, when returning -1 for the first time, .can_add is set to false,
* and further calls to nbd_extent_array_add() will crash.
* (this avoids the situation where a caller ignores failure to add one extent,
* where adding another extent that would squash into the last array entry
* would result in an incorrect range reported to the client)
*/
static int nbd_extent_array_add(NBDExtentArray *ea,
uint32_t length, uint32_t flags)
{
assert(ea->can_add);
if (!length) {
return 0;
}
/* Extend previous extent if flags are the same */
if (ea->count > 0 && flags == ea->extents[ea->count - 1].flags) {
uint64_t sum = (uint64_t)length + ea->extents[ea->count - 1].length;
if (sum <= UINT32_MAX) {
ea->extents[ea->count - 1].length = sum;
ea->total_length += length;
return 0;
}
}
if (ea->count >= ea->nb_alloc) {
ea->can_add = false;
return -1;
}
ea->total_length += length;
ea->extents[ea->count] = (NBDExtent) {.length = length, .flags = flags};
ea->count++;
return 0;
}
static int blockstatus_to_extents(BlockDriverState *bs, uint64_t offset,
uint64_t bytes, NBDExtentArray *ea)
{
while (bytes) {
uint32_t flags;
int64_t num;
int ret = bdrv_block_status_above(bs, NULL, offset, bytes, &num,
NULL, NULL);
if (ret < 0) {
return ret;
}
nbd: server: Report holes for raw images When querying image extents for raw image, qemu-nbd reports holes as zero: $ qemu-nbd -t -r -f raw empty-6g.raw $ qemu-img map --output json nbd://localhost [{ "start": 0, "length": 6442450944, "depth": 0, "zero": true, "data": true, "offset": 0}] $ qemu-img map --output json empty-6g.raw [{ "start": 0, "length": 6442450944, "depth": 0, "zero": true, "data": false, "offset": 0}] Turns out that qemu-img map reports a hole based on BDRV_BLOCK_DATA, but nbd server reports a hole based on BDRV_BLOCK_ALLOCATED. The NBD protocol says: NBD_STATE_HOLE (bit 0): if set, the block represents a hole (and future writes to that area may cause fragmentation or encounter an NBD_ENOSPC error); if clear, the block is allocated or the server could not otherwise determine its status. qemu-img manual says: whether the sectors contain actual data or not (boolean field data; if false, the sectors are either unallocated or stored as optimized all-zero clusters); To me, data=false looks compatible with NBD_STATE_HOLE. From user point of view, getting same results from qemu-nbd and qemu-img is more important than being more correct about allocation status. Changing nbd server to report holes using BDRV_BLOCK_DATA makes qemu-nbd results compatible with qemu-img map: $ qemu-img map --output json nbd://localhost [{ "start": 0, "length": 6442450944, "depth": 0, "zero": true, "data": false, "offset": 0}] Signed-off-by: Nir Soffer <nsoffer@redhat.com> Message-Id: <20210219160752.1826830-1-nsoffer@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Signed-off-by: Eric Blake <eblake@redhat.com>
2021-02-19 17:07:52 +01:00
flags = (ret & BDRV_BLOCK_DATA ? 0 : NBD_STATE_HOLE) |
(ret & BDRV_BLOCK_ZERO ? NBD_STATE_ZERO : 0);
if (nbd_extent_array_add(ea, num, flags) < 0) {
return 0;
}
offset += num;
bytes -= num;
}
return 0;
}
static int blockalloc_to_extents(BlockDriverState *bs, uint64_t offset,
uint64_t bytes, NBDExtentArray *ea)
{
while (bytes) {
int64_t num;
int ret = bdrv_is_allocated_above(bs, NULL, false, offset, bytes,
&num);
if (ret < 0) {
return ret;
}
if (nbd_extent_array_add(ea, num, ret) < 0) {
return 0;
}
offset += num;
bytes -= num;
}
return 0;
}
/*
* nbd_co_send_extents
*
* @ea is converted to BE by the function
* @last controls whether NBD_REPLY_FLAG_DONE is sent.
*/
static int nbd_co_send_extents(NBDClient *client, uint64_t handle,
NBDExtentArray *ea,
bool last, uint32_t context_id, Error **errp)
{
NBDStructuredMeta chunk;
struct iovec iov[] = {
{.iov_base = &chunk, .iov_len = sizeof(chunk)},
{.iov_base = ea->extents, .iov_len = ea->count * sizeof(ea->extents[0])}
};
nbd_extent_array_convert_to_be(ea);
trace_nbd_co_send_extents(handle, ea->count, context_id, ea->total_length,
last);
set_be_chunk(&chunk.h, last ? NBD_REPLY_FLAG_DONE : 0,
NBD_REPLY_TYPE_BLOCK_STATUS,
handle, sizeof(chunk) - sizeof(chunk.h) + iov[1].iov_len);
stl_be_p(&chunk.context_id, context_id);
return nbd_co_send_iov(client, iov, 2, errp);
}
/* Get block status from the exported device and send it to the client */
static int nbd_co_send_block_status(NBDClient *client, uint64_t handle,
BlockDriverState *bs, uint64_t offset,
uint32_t length, bool dont_fragment,
bool last, uint32_t context_id,
Error **errp)
{
int ret;
unsigned int nb_extents = dont_fragment ? 1 : NBD_MAX_BLOCK_STATUS_EXTENTS;
g_autoptr(NBDExtentArray) ea = nbd_extent_array_new(nb_extents);
if (context_id == NBD_META_ID_BASE_ALLOCATION) {
ret = blockstatus_to_extents(bs, offset, length, ea);
} else {
ret = blockalloc_to_extents(bs, offset, length, ea);
}
if (ret < 0) {
return nbd_co_send_structured_error(
client, handle, -ret, "can't get block status", errp);
}
return nbd_co_send_extents(client, handle, ea, last, context_id, errp);
}
/* Populate @ea from a dirty bitmap. */
static void bitmap_to_extents(BdrvDirtyBitmap *bitmap,
uint64_t offset, uint64_t length,
NBDExtentArray *es)
{
int64_t start, dirty_start, dirty_count;
int64_t end = offset + length;
bool full = false;
bdrv_dirty_bitmap_lock(bitmap);
for (start = offset;
bdrv_dirty_bitmap_next_dirty_area(bitmap, start, end, INT32_MAX,
&dirty_start, &dirty_count);
start = dirty_start + dirty_count)
{
if ((nbd_extent_array_add(es, dirty_start - start, 0) < 0) ||
(nbd_extent_array_add(es, dirty_count, NBD_STATE_DIRTY) < 0))
{
full = true;
break;
}
}
if (!full) {
/* last non dirty extent, nothing to do if array is now full */
(void) nbd_extent_array_add(es, end - start, 0);
}
bdrv_dirty_bitmap_unlock(bitmap);
}
static int nbd_co_send_bitmap(NBDClient *client, uint64_t handle,
BdrvDirtyBitmap *bitmap, uint64_t offset,
uint32_t length, bool dont_fragment, bool last,
uint32_t context_id, Error **errp)
{
unsigned int nb_extents = dont_fragment ? 1 : NBD_MAX_BLOCK_STATUS_EXTENTS;
g_autoptr(NBDExtentArray) ea = nbd_extent_array_new(nb_extents);
bitmap_to_extents(bitmap, offset, length, ea);
return nbd_co_send_extents(client, handle, ea, last, context_id, errp);
}
/* nbd_co_receive_request
* Collect a client request. Return 0 if request looks valid, -EIO to drop
* connection right away, -EAGAIN to indicate we were interrupted and the
* channel should be quiesced, and any other negative value to report an error
* to the client (although the caller may still need to disconnect after
* reporting the error).
*/
static int nbd_co_receive_request(NBDRequestData *req, NBDRequest *request,
Error **errp)
{
NBDClient *client = req->client;
int valid_flags;
int ret;
g_assert(qemu_in_coroutine());
assert(client->recv_coroutine == qemu_coroutine_self());
ret = nbd_receive_request(client, request, errp);
if (ret < 0) {
return ret;
}
trace_nbd_co_receive_request_decode_type(request->handle, request->type,
nbd_cmd_lookup(request->type));
if (request->type != NBD_CMD_WRITE) {
/* No payload, we are ready to read the next request. */
req->complete = true;
}
if (request->type == NBD_CMD_DISC) {
/* Special case: we're going to disconnect without a reply,
* whether or not flags, from, or len are bogus */
return -EIO;
}
if (request->type == NBD_CMD_READ || request->type == NBD_CMD_WRITE ||
request->type == NBD_CMD_CACHE)
{
if (request->len > NBD_MAX_BUFFER_SIZE) {
error_setg(errp, "len (%" PRIu32" ) is larger than max len (%u)",
request->len, NBD_MAX_BUFFER_SIZE);
return -EINVAL;
}
if (request->type != NBD_CMD_CACHE) {
req->data = blk_try_blockalign(client->exp->common.blk,
request->len);
if (req->data == NULL) {
error_setg(errp, "No memory");
return -ENOMEM;
}
}
}
if (request->type == NBD_CMD_WRITE) {
if (nbd_read(client->ioc, req->data, request->len, "CMD_WRITE data",
errp) < 0)
{
return -EIO;
}
req->complete = true;
trace_nbd_co_receive_request_payload_received(request->handle,
request->len);
}
/* Sanity checks. */
if (client->exp->nbdflags & NBD_FLAG_READ_ONLY &&
(request->type == NBD_CMD_WRITE ||
request->type == NBD_CMD_WRITE_ZEROES ||
request->type == NBD_CMD_TRIM)) {
error_setg(errp, "Export is read-only");
return -EROFS;
}
if (request->from > client->exp->size ||
request->len > client->exp->size - request->from) {
error_setg(errp, "operation past EOF; From: %" PRIu64 ", Len: %" PRIu32
", Size: %" PRIu64, request->from, request->len,
client->exp->size);
return (request->type == NBD_CMD_WRITE ||
request->type == NBD_CMD_WRITE_ZEROES) ? -ENOSPC : -EINVAL;
}
nbd/server: Trace client noncompliance on unaligned requests We've recently added traces for clients to flag server non-compliance; let's do the same for servers to flag client non-compliance. According to the spec, if the client requests NBD_INFO_BLOCK_SIZE, it is promising to send all requests aligned to those boundaries. Of course, if the client does not request NBD_INFO_BLOCK_SIZE, then it made no promises so we shouldn't flag anything; and because we are willing to handle clients that made no promises (the spec allows us to use NBD_REP_ERR_BLOCK_SIZE_REQD if we had been unwilling), we already have to handle unaligned requests (which the block layer already does on our behalf). So even though the spec allows us to return EINVAL for clients that promised to behave, it's easier to always answer unaligned requests. Still, flagging non-compliance can be useful in debugging a client that is trying to be maximally portable. Qemu as client used to have one spot where it sent non-compliant requests: if the server sends an unaligned reply to NBD_CMD_BLOCK_STATUS, and the client was iterating over the entire disk, the next request would start at that unaligned point; this was fixed in commit a39286dd when the client was taught to work around server non-compliance; but is equally fixed if the server is patched to not send unaligned replies in the first place (yes, qemu 4.0 as server still has few such bugs, although they will be patched in 4.1). Fortunately, I did not find any more spots where qemu as client was non-compliant. I was able to test the patch by using the following hack to convince qemu-io to run various unaligned commands, coupled with serving 512-byte alignment by intentionally omitting '-f raw' on the server while viewing server traces. | diff --git i/nbd/client.c w/nbd/client.c | index 427980bdd22..1858b2aac35 100644 | --- i/nbd/client.c | +++ w/nbd/client.c | @@ -449,6 +449,7 @@ static int nbd_opt_info_or_go(QIOChannel *ioc, uint32_t opt, | nbd_send_opt_abort(ioc); | return -1; | } | + info->min_block = 1;//hack | if (!is_power_of_2(info->min_block)) { | error_setg(errp, "server minimum block size %" PRIu32 | " is not a power of two", info->min_block); Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <20190403030526.12258-3-eblake@redhat.com> [eblake: address minor review nits] Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
2019-04-03 05:05:21 +02:00
if (client->check_align && !QEMU_IS_ALIGNED(request->from | request->len,
client->check_align)) {
/*
* The block layer gracefully handles unaligned requests, but
* it's still worth tracing client non-compliance
*/
trace_nbd_co_receive_align_compliance(nbd_cmd_lookup(request->type),
request->from,
request->len,
client->check_align);
}
valid_flags = NBD_CMD_FLAG_FUA;
if (request->type == NBD_CMD_READ && client->structured_reply) {
valid_flags |= NBD_CMD_FLAG_DF;
} else if (request->type == NBD_CMD_WRITE_ZEROES) {
valid_flags |= NBD_CMD_FLAG_NO_HOLE | NBD_CMD_FLAG_FAST_ZERO;
} else if (request->type == NBD_CMD_BLOCK_STATUS) {
valid_flags |= NBD_CMD_FLAG_REQ_ONE;
}
if (request->flags & ~valid_flags) {
error_setg(errp, "unsupported flags for command %s (got 0x%x)",
nbd_cmd_lookup(request->type), request->flags);
return -EINVAL;
}
return 0;
}
/* Send simple reply without a payload, or a structured error
* @error_msg is ignored if @ret >= 0
* Returns 0 if connection is still live, -errno on failure to talk to client
*/
static coroutine_fn int nbd_send_generic_reply(NBDClient *client,
uint64_t handle,
int ret,
const char *error_msg,
Error **errp)
{
if (client->structured_reply && ret < 0) {
return nbd_co_send_structured_error(client, handle, -ret, error_msg,
errp);
} else {
return nbd_co_send_simple_reply(client, handle, ret < 0 ? -ret : 0,
NULL, 0, errp);
}
}
/* Handle NBD_CMD_READ request.
* Return -errno if sending fails. Other errors are reported directly to the
* client as an error reply. */
static coroutine_fn int nbd_do_cmd_read(NBDClient *client, NBDRequest *request,
uint8_t *data, Error **errp)
{
int ret;
NBDExport *exp = client->exp;
assert(request->type == NBD_CMD_READ);
/* XXX: NBD Protocol only documents use of FUA with WRITE */
if (request->flags & NBD_CMD_FLAG_FUA) {
ret = blk_co_flush(exp->common.blk);
if (ret < 0) {
return nbd_send_generic_reply(client, request->handle, ret,
"flush failed", errp);
}
}
if (client->structured_reply && !(request->flags & NBD_CMD_FLAG_DF) &&
request->len)
{
return nbd_co_send_sparse_read(client, request->handle, request->from,
data, request->len, errp);
}
ret = blk_pread(exp->common.blk, request->from, data, request->len);
if (ret < 0) {
return nbd_send_generic_reply(client, request->handle, ret,
"reading from file failed", errp);
}
if (client->structured_reply) {
if (request->len) {
return nbd_co_send_structured_read(client, request->handle,
request->from, data,
request->len, true, errp);
} else {
return nbd_co_send_structured_done(client, request->handle, errp);
}
} else {
return nbd_co_send_simple_reply(client, request->handle, 0,
data, request->len, errp);
}
}
/*
* nbd_do_cmd_cache
*
* Handle NBD_CMD_CACHE request.
* Return -errno if sending fails. Other errors are reported directly to the
* client as an error reply.
*/
static coroutine_fn int nbd_do_cmd_cache(NBDClient *client, NBDRequest *request,
Error **errp)
{
int ret;
NBDExport *exp = client->exp;
assert(request->type == NBD_CMD_CACHE);
ret = blk_co_preadv(exp->common.blk, request->from, request->len,
NULL, BDRV_REQ_COPY_ON_READ | BDRV_REQ_PREFETCH);
return nbd_send_generic_reply(client, request->handle, ret,
"caching data failed", errp);
}
/* Handle NBD request.
* Return -errno if sending fails. Other errors are reported directly to the
* client as an error reply. */
static coroutine_fn int nbd_handle_request(NBDClient *client,
NBDRequest *request,
uint8_t *data, Error **errp)
{
int ret;
int flags;
NBDExport *exp = client->exp;
char *msg;
size_t i;
switch (request->type) {
case NBD_CMD_CACHE:
return nbd_do_cmd_cache(client, request, errp);
case NBD_CMD_READ:
return nbd_do_cmd_read(client, request, data, errp);
case NBD_CMD_WRITE:
flags = 0;
if (request->flags & NBD_CMD_FLAG_FUA) {
flags |= BDRV_REQ_FUA;
}
ret = blk_pwrite(exp->common.blk, request->from, data, request->len,
flags);
return nbd_send_generic_reply(client, request->handle, ret,
"writing to file failed", errp);
case NBD_CMD_WRITE_ZEROES:
flags = 0;
if (request->flags & NBD_CMD_FLAG_FUA) {
flags |= BDRV_REQ_FUA;
}
if (!(request->flags & NBD_CMD_FLAG_NO_HOLE)) {
flags |= BDRV_REQ_MAY_UNMAP;
}
if (request->flags & NBD_CMD_FLAG_FAST_ZERO) {
flags |= BDRV_REQ_NO_FALLBACK;
}
ret = blk_pwrite_zeroes(exp->common.blk, request->from, request->len,
flags);
return nbd_send_generic_reply(client, request->handle, ret,
"writing to file failed", errp);
case NBD_CMD_DISC:
/* unreachable, thanks to special case in nbd_co_receive_request() */
abort();
case NBD_CMD_FLUSH:
ret = blk_co_flush(exp->common.blk);
return nbd_send_generic_reply(client, request->handle, ret,
"flush failed", errp);
case NBD_CMD_TRIM:
ret = blk_co_pdiscard(exp->common.blk, request->from, request->len);
nbd: Fix large trim/zero requests Although qemu as NBD client limits requests to <2G, the NBD protocol allows clients to send requests almost all the way up to 4G. But because our block layer is not yet 64-bit clean, we accidentally wrap such requests into a negative size, and fail with EIO instead of performing the intended operation. The bug is visible in modern systems with something as simple as: $ qemu-img create -f qcow2 /tmp/image.img 5G $ sudo qemu-nbd --connect=/dev/nbd0 /tmp/image.img $ sudo blkdiscard /dev/nbd0 or with user-space only: $ truncate --size=3G file $ qemu-nbd -f raw file $ nbdsh -u nbd://localhost:10809 -c 'h.trim(3*1024*1024*1024,0)' Although both blk_co_pdiscard and blk_pwrite_zeroes currently return 0 on success, this is also a good time to fix our code to a more robust paradigm that treats all non-negative values as success. Alas, our iotests do not currently make it easy to add external dependencies on blkdiscard or nbdsh, so we have to rely on manual testing for now. This patch can be reverted when we later improve the overall block layer to be 64-bit clean, but for now, a minimal fix was deemed less risky prior to release. CC: qemu-stable@nongnu.org Fixes: 1f4d6d18ed Fixes: 1c6c4bb7f0 Fixes: https://github.com/systemd/systemd/issues/16242 Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <20200722212231.535072-1-eblake@redhat.com> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> [eblake: rework success tests to use >=0]
2020-07-22 23:22:31 +02:00
if (ret >= 0 && request->flags & NBD_CMD_FLAG_FUA) {
ret = blk_co_flush(exp->common.blk);
nbd/server: Honor FUA request on NBD_CMD_TRIM The NBD spec states that since trim requests can affect disk contents, then they should allow for FUA semantics just like writes for ensuring the disk has settled before returning. As bdrv_[co_]pdiscard() does not support a flags argument, we can't pass FUA down the block layer stack, and must therefore emulate it with a flush at the NBD layer. Note that in all reality, generic well-behaved clients will never send TRIM+FUA (in fact, qemu as a client never does, and we have no intention to plumb flags into bdrv_pdiscard). This is because the NBD protocol states that it is unspecified to READ a trimmed area (you might read stale data, all zeroes, or even random unrelated data) without first rewriting it, and even the experimental BLOCK_STATUS extension states that TRIM need not affect reported status. Thus, in the general case, a client cannot tell the difference between an arbitrary server that ignores TRIM, a server that had a power outage without flushing to disk, and a server that actually affected the disk before returning; so waiting for the trim actions to flush to disk makes little sense. However, for a specific client and server pair, where the client knows the server treats TRIM'd areas as guaranteed reads-zero, waiting for a flush makes sense, hence why the protocol documents that FUA is valid on trim. So, even though the NBD protocol doesn't have a way for the server to advertise what effects (if any) TRIM will actually have, and thus any client that relies on specific effects is probably in error, we can at least support a client that requests TRIM+FUA. Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <20180307225732.155835-1-eblake@redhat.com>
2018-03-07 23:57:32 +01:00
}
return nbd_send_generic_reply(client, request->handle, ret,
"discard failed", errp);
case NBD_CMD_BLOCK_STATUS:
if (!request->len) {
return nbd_send_generic_reply(client, request->handle, -EINVAL,
"need non-zero length", errp);
}
if (client->export_meta.count) {
bool dont_fragment = request->flags & NBD_CMD_FLAG_REQ_ONE;
int contexts_remaining = client->export_meta.count;
if (client->export_meta.base_allocation) {
ret = nbd_co_send_block_status(client, request->handle,
blk_bs(exp->common.blk),
request->from,
request->len, dont_fragment,
!--contexts_remaining,
NBD_META_ID_BASE_ALLOCATION,
errp);
if (ret < 0) {
return ret;
}
}
if (client->export_meta.allocation_depth) {
ret = nbd_co_send_block_status(client, request->handle,
blk_bs(exp->common.blk),
request->from, request->len,
dont_fragment,
!--contexts_remaining,
NBD_META_ID_ALLOCATION_DEPTH,
errp);
if (ret < 0) {
return ret;
}
}
for (i = 0; i < client->exp->nr_export_bitmaps; i++) {
if (!client->export_meta.bitmaps[i]) {
continue;
}
ret = nbd_co_send_bitmap(client, request->handle,
client->exp->export_bitmaps[i],
request->from, request->len,
dont_fragment, !--contexts_remaining,
NBD_META_ID_DIRTY_BITMAP + i, errp);
if (ret < 0) {
return ret;
}
}
assert(!contexts_remaining);
return 0;
} else {
return nbd_send_generic_reply(client, request->handle, -EINVAL,
"CMD_BLOCK_STATUS not negotiated",
errp);
}
default:
msg = g_strdup_printf("invalid request type (%" PRIu32 ") received",
request->type);
ret = nbd_send_generic_reply(client, request->handle, -EINVAL, msg,
errp);
g_free(msg);
return ret;
}
}
/* Owns a reference to the NBDClient passed as opaque. */
static coroutine_fn void nbd_trip(void *opaque)
{
NBDClient *client = opaque;
NBDRequestData *req;
NBDRequest request = { 0 }; /* GCC thinks it can be used uninitialized */
int ret;
Error *local_err = NULL;
trace_nbd_trip();
if (client->closing) {
nbd_client_put(client);
return;
}
if (client->quiescing) {
/*
* We're switching between AIO contexts. Don't attempt to receive a new
* request and kick the main context which may be waiting for us.
*/
nbd_client_put(client);
client->recv_coroutine = NULL;
aio_wait_kick();
return;
}
req = nbd_request_get(client);
ret = nbd_co_receive_request(req, &request, &local_err);
client->recv_coroutine = NULL;
if (client->closing) {
/*
* The client may be closed when we are blocked in
* nbd_co_receive_request()
*/
goto done;
}
if (ret == -EAGAIN) {
assert(client->quiescing);
goto done;
}
nbd_client_receive_next_request(client);
if (ret == -EIO) {
goto disconnect;
}
if (ret < 0) {
/* It wasn't -EIO, so, according to nbd_co_receive_request()
* semantics, we should return the error to the client. */
Error *export_err = local_err;
local_err = NULL;
ret = nbd_send_generic_reply(client, request.handle, -EINVAL,
error_get_pretty(export_err), &local_err);
error_free(export_err);
} else {
ret = nbd_handle_request(client, &request, req->data, &local_err);
}
if (ret < 0) {
error_prepend(&local_err, "Failed to send reply: ");
goto disconnect;
}
/* We must disconnect after NBD_CMD_WRITE if we did not
* read the payload.
*/
if (!req->complete) {
error_setg(&local_err, "Request handling failed in intermediate state");
goto disconnect;
}
done:
nbd_request_put(req);
nbd_client_put(client);
return;
disconnect:
if (local_err) {
error_reportf_err(local_err, "Disconnect client, due to: ");
}
nbd_request_put(req);
nbd: Fix regression on resiliency to port scan Back in qemu 2.5, qemu-nbd was immune to port probes (a transient server would not quit, regardless of how many probe connections came and went, until a connection actually negotiated). But we broke that in commit ee7d7aa when removing the return value to nbd_client_new(), although that patch also introduced a bug causing an assertion failure on a client that fails negotiation. We then made it worse during refactoring in commit 1a6245a (a segfault before we could even assert); the (masked) assertion was cleaned up in d3780c2 (still in 2.6), and just recently we finally fixed the segfault ("nbd: Fully intialize client in case of failed negotiation"). But that still means that ever since we added TLS support to qemu-nbd, we have been vulnerable to an ill-timed port-scan being able to cause a denial of service by taking down qemu-nbd before a real client has a chance to connect. Since negotiation is now handled asynchronously via coroutines, we no longer have a synchronous point of return by re-adding a return value to nbd_client_new(). So this patch instead wires things up to pass the negotiation status through the close_fn callback function. Simple test across two terminals: $ qemu-nbd -f raw -p 30001 file $ nmap 127.0.0.1 -p 30001 && \ qemu-io -c 'r 0 512' -f raw nbd://localhost:30001 Note that this patch does not change what constitutes successful negotiation (thus, a client must enter transmission phase before that client can be considered as a reason to terminate the server when the connection ends). Perhaps we may want to tweak things in a later patch to also treat a client that uses NBD_OPT_ABORT as being a 'successful' negotiation (the client correctly talked the NBD protocol, and informed us it was not going to use our export after all), but that's a discussion for another day. Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1451614 Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <20170608222617.20376-1-eblake@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-06-09 00:26:17 +02:00
client_close(client, true);
nbd_client_put(client);
}
static void nbd_client_receive_next_request(NBDClient *client)
{
if (!client->recv_coroutine && client->nb_requests < MAX_NBD_REQUESTS &&
!client->quiescing) {
nbd_client_get(client);
client->recv_coroutine = qemu_coroutine_create(nbd_trip, client);
aio_co_schedule(client->exp->common.ctx, client->recv_coroutine);
}
}
static coroutine_fn void nbd_co_client_start(void *opaque)
{
NBDClient *client = opaque;
Error *local_err = NULL;
qemu_co_mutex_init(&client->send_lock);
if (nbd_negotiate(client, &local_err)) {
if (local_err) {
error_report_err(local_err);
}
nbd: Fix regression on resiliency to port scan Back in qemu 2.5, qemu-nbd was immune to port probes (a transient server would not quit, regardless of how many probe connections came and went, until a connection actually negotiated). But we broke that in commit ee7d7aa when removing the return value to nbd_client_new(), although that patch also introduced a bug causing an assertion failure on a client that fails negotiation. We then made it worse during refactoring in commit 1a6245a (a segfault before we could even assert); the (masked) assertion was cleaned up in d3780c2 (still in 2.6), and just recently we finally fixed the segfault ("nbd: Fully intialize client in case of failed negotiation"). But that still means that ever since we added TLS support to qemu-nbd, we have been vulnerable to an ill-timed port-scan being able to cause a denial of service by taking down qemu-nbd before a real client has a chance to connect. Since negotiation is now handled asynchronously via coroutines, we no longer have a synchronous point of return by re-adding a return value to nbd_client_new(). So this patch instead wires things up to pass the negotiation status through the close_fn callback function. Simple test across two terminals: $ qemu-nbd -f raw -p 30001 file $ nmap 127.0.0.1 -p 30001 && \ qemu-io -c 'r 0 512' -f raw nbd://localhost:30001 Note that this patch does not change what constitutes successful negotiation (thus, a client must enter transmission phase before that client can be considered as a reason to terminate the server when the connection ends). Perhaps we may want to tweak things in a later patch to also treat a client that uses NBD_OPT_ABORT as being a 'successful' negotiation (the client correctly talked the NBD protocol, and informed us it was not going to use our export after all), but that's a discussion for another day. Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1451614 Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <20170608222617.20376-1-eblake@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-06-09 00:26:17 +02:00
client_close(client, false);
return;
}
nbd_client_receive_next_request(client);
}
nbd: Fix regression on resiliency to port scan Back in qemu 2.5, qemu-nbd was immune to port probes (a transient server would not quit, regardless of how many probe connections came and went, until a connection actually negotiated). But we broke that in commit ee7d7aa when removing the return value to nbd_client_new(), although that patch also introduced a bug causing an assertion failure on a client that fails negotiation. We then made it worse during refactoring in commit 1a6245a (a segfault before we could even assert); the (masked) assertion was cleaned up in d3780c2 (still in 2.6), and just recently we finally fixed the segfault ("nbd: Fully intialize client in case of failed negotiation"). But that still means that ever since we added TLS support to qemu-nbd, we have been vulnerable to an ill-timed port-scan being able to cause a denial of service by taking down qemu-nbd before a real client has a chance to connect. Since negotiation is now handled asynchronously via coroutines, we no longer have a synchronous point of return by re-adding a return value to nbd_client_new(). So this patch instead wires things up to pass the negotiation status through the close_fn callback function. Simple test across two terminals: $ qemu-nbd -f raw -p 30001 file $ nmap 127.0.0.1 -p 30001 && \ qemu-io -c 'r 0 512' -f raw nbd://localhost:30001 Note that this patch does not change what constitutes successful negotiation (thus, a client must enter transmission phase before that client can be considered as a reason to terminate the server when the connection ends). Perhaps we may want to tweak things in a later patch to also treat a client that uses NBD_OPT_ABORT as being a 'successful' negotiation (the client correctly talked the NBD protocol, and informed us it was not going to use our export after all), but that's a discussion for another day. Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1451614 Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <20170608222617.20376-1-eblake@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-06-09 00:26:17 +02:00
/*
* Create a new client listener using the given channel @sioc.
* Begin servicing it in a coroutine. When the connection closes, call
* @close_fn with an indication of whether the client completed negotiation.
nbd: Fix regression on resiliency to port scan Back in qemu 2.5, qemu-nbd was immune to port probes (a transient server would not quit, regardless of how many probe connections came and went, until a connection actually negotiated). But we broke that in commit ee7d7aa when removing the return value to nbd_client_new(), although that patch also introduced a bug causing an assertion failure on a client that fails negotiation. We then made it worse during refactoring in commit 1a6245a (a segfault before we could even assert); the (masked) assertion was cleaned up in d3780c2 (still in 2.6), and just recently we finally fixed the segfault ("nbd: Fully intialize client in case of failed negotiation"). But that still means that ever since we added TLS support to qemu-nbd, we have been vulnerable to an ill-timed port-scan being able to cause a denial of service by taking down qemu-nbd before a real client has a chance to connect. Since negotiation is now handled asynchronously via coroutines, we no longer have a synchronous point of return by re-adding a return value to nbd_client_new(). So this patch instead wires things up to pass the negotiation status through the close_fn callback function. Simple test across two terminals: $ qemu-nbd -f raw -p 30001 file $ nmap 127.0.0.1 -p 30001 && \ qemu-io -c 'r 0 512' -f raw nbd://localhost:30001 Note that this patch does not change what constitutes successful negotiation (thus, a client must enter transmission phase before that client can be considered as a reason to terminate the server when the connection ends). Perhaps we may want to tweak things in a later patch to also treat a client that uses NBD_OPT_ABORT as being a 'successful' negotiation (the client correctly talked the NBD protocol, and informed us it was not going to use our export after all), but that's a discussion for another day. Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1451614 Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <20170608222617.20376-1-eblake@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-06-09 00:26:17 +02:00
*/
void nbd_client_new(QIOChannelSocket *sioc,
QCryptoTLSCreds *tlscreds,
qemu-nbd: add support for authorization of TLS clients Currently any client which can complete the TLS handshake is able to use the NBD server. The server admin can turn on the 'verify-peer' option for the x509 creds to require the client to provide a x509 certificate. This means the client will have to acquire a certificate from the CA before they are permitted to use the NBD server. This is still a fairly low bar to cross. This adds a '--tls-authz OBJECT-ID' option to the qemu-nbd command which takes the ID of a previously added 'QAuthZ' object instance. This will be used to validate the client's x509 distinguished name. Clients failing the authorization check will not be permitted to use the NBD server. For example to setup authorization that only allows connection from a client whose x509 certificate distinguished name is CN=laptop.example.com,O=Example Org,L=London,ST=London,C=GB escape the commas in the name and use: qemu-nbd --object tls-creds-x509,id=tls0,dir=/home/berrange/qemutls,\ endpoint=server,verify-peer=yes \ --object 'authz-simple,id=auth0,identity=CN=laptop.example.com,,\ O=Example Org,,L=London,,ST=London,,C=GB' \ --tls-creds tls0 \ --tls-authz authz0 \ ....other qemu-nbd args... NB: a real shell command line would not have leading whitespace after the line continuation, it is just included here for clarity. Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Message-Id: <20190227162035.18543-2-berrange@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> [eblake: split long line in --help text, tweak 233 to show that whitespace after ,, in identity= portion is actually okay] Signed-off-by: Eric Blake <eblake@redhat.com>
2019-02-27 17:20:33 +01:00
const char *tlsauthz,
nbd: Fix regression on resiliency to port scan Back in qemu 2.5, qemu-nbd was immune to port probes (a transient server would not quit, regardless of how many probe connections came and went, until a connection actually negotiated). But we broke that in commit ee7d7aa when removing the return value to nbd_client_new(), although that patch also introduced a bug causing an assertion failure on a client that fails negotiation. We then made it worse during refactoring in commit 1a6245a (a segfault before we could even assert); the (masked) assertion was cleaned up in d3780c2 (still in 2.6), and just recently we finally fixed the segfault ("nbd: Fully intialize client in case of failed negotiation"). But that still means that ever since we added TLS support to qemu-nbd, we have been vulnerable to an ill-timed port-scan being able to cause a denial of service by taking down qemu-nbd before a real client has a chance to connect. Since negotiation is now handled asynchronously via coroutines, we no longer have a synchronous point of return by re-adding a return value to nbd_client_new(). So this patch instead wires things up to pass the negotiation status through the close_fn callback function. Simple test across two terminals: $ qemu-nbd -f raw -p 30001 file $ nmap 127.0.0.1 -p 30001 && \ qemu-io -c 'r 0 512' -f raw nbd://localhost:30001 Note that this patch does not change what constitutes successful negotiation (thus, a client must enter transmission phase before that client can be considered as a reason to terminate the server when the connection ends). Perhaps we may want to tweak things in a later patch to also treat a client that uses NBD_OPT_ABORT as being a 'successful' negotiation (the client correctly talked the NBD protocol, and informed us it was not going to use our export after all), but that's a discussion for another day. Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1451614 Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <20170608222617.20376-1-eblake@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-06-09 00:26:17 +02:00
void (*close_fn)(NBDClient *, bool))
{
NBDClient *client;
Coroutine *co;
client = g_new0(NBDClient, 1);
client->refcount = 1;
client->tlscreds = tlscreds;
if (tlscreds) {
object_ref(OBJECT(client->tlscreds));
}
qemu-nbd: add support for authorization of TLS clients Currently any client which can complete the TLS handshake is able to use the NBD server. The server admin can turn on the 'verify-peer' option for the x509 creds to require the client to provide a x509 certificate. This means the client will have to acquire a certificate from the CA before they are permitted to use the NBD server. This is still a fairly low bar to cross. This adds a '--tls-authz OBJECT-ID' option to the qemu-nbd command which takes the ID of a previously added 'QAuthZ' object instance. This will be used to validate the client's x509 distinguished name. Clients failing the authorization check will not be permitted to use the NBD server. For example to setup authorization that only allows connection from a client whose x509 certificate distinguished name is CN=laptop.example.com,O=Example Org,L=London,ST=London,C=GB escape the commas in the name and use: qemu-nbd --object tls-creds-x509,id=tls0,dir=/home/berrange/qemutls,\ endpoint=server,verify-peer=yes \ --object 'authz-simple,id=auth0,identity=CN=laptop.example.com,,\ O=Example Org,,L=London,,ST=London,,C=GB' \ --tls-creds tls0 \ --tls-authz authz0 \ ....other qemu-nbd args... NB: a real shell command line would not have leading whitespace after the line continuation, it is just included here for clarity. Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Message-Id: <20190227162035.18543-2-berrange@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> [eblake: split long line in --help text, tweak 233 to show that whitespace after ,, in identity= portion is actually okay] Signed-off-by: Eric Blake <eblake@redhat.com>
2019-02-27 17:20:33 +01:00
client->tlsauthz = g_strdup(tlsauthz);
client->sioc = sioc;
object_ref(OBJECT(client->sioc));
client->ioc = QIO_CHANNEL(sioc);
object_ref(OBJECT(client->ioc));
nbd: Fix regression on resiliency to port scan Back in qemu 2.5, qemu-nbd was immune to port probes (a transient server would not quit, regardless of how many probe connections came and went, until a connection actually negotiated). But we broke that in commit ee7d7aa when removing the return value to nbd_client_new(), although that patch also introduced a bug causing an assertion failure on a client that fails negotiation. We then made it worse during refactoring in commit 1a6245a (a segfault before we could even assert); the (masked) assertion was cleaned up in d3780c2 (still in 2.6), and just recently we finally fixed the segfault ("nbd: Fully intialize client in case of failed negotiation"). But that still means that ever since we added TLS support to qemu-nbd, we have been vulnerable to an ill-timed port-scan being able to cause a denial of service by taking down qemu-nbd before a real client has a chance to connect. Since negotiation is now handled asynchronously via coroutines, we no longer have a synchronous point of return by re-adding a return value to nbd_client_new(). So this patch instead wires things up to pass the negotiation status through the close_fn callback function. Simple test across two terminals: $ qemu-nbd -f raw -p 30001 file $ nmap 127.0.0.1 -p 30001 && \ qemu-io -c 'r 0 512' -f raw nbd://localhost:30001 Note that this patch does not change what constitutes successful negotiation (thus, a client must enter transmission phase before that client can be considered as a reason to terminate the server when the connection ends). Perhaps we may want to tweak things in a later patch to also treat a client that uses NBD_OPT_ABORT as being a 'successful' negotiation (the client correctly talked the NBD protocol, and informed us it was not going to use our export after all), but that's a discussion for another day. Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1451614 Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <20170608222617.20376-1-eblake@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-06-09 00:26:17 +02:00
client->close_fn = close_fn;
co = qemu_coroutine_create(nbd_co_client_start, client);
qemu_coroutine_enter(co);
}