qemu-e2k/Makefile.objs

255 lines
8.1 KiB
Makefile
Raw Normal View History

#######################################################################
# Stub library, linked in tools
stub-obj-y = stubs/
#######################################################################
# Target-independent parts used in system and user emulation
universal-obj-y =
universal-obj-y += qemu-log.o
#######################################################################
# QObject
qobject-obj-y = qint.o qstring.o qdict.o qlist.o qfloat.o qbool.o
qobject-obj-y += qjson.o json-lexer.o json-streamer.o json-parser.o
qobject-obj-y += qerror.o error.o qemu-error.o
universal-obj-y += $(qobject-obj-y)
#######################################################################
# QOM
qom-obj-y = qom/
universal-obj-y += $(qom-obj-y)
#######################################################################
# oslib-obj-y is code depending on the OS (win32 vs posix)
oslib-obj-y = osdep.o cutils.o qemu-timer-common.o
oslib-obj-$(CONFIG_WIN32) += oslib-win32.o qemu-thread-win32.o
oslib-obj-$(CONFIG_POSIX) += oslib-posix.o qemu-thread-posix.o
coroutine: introduce coroutines Asynchronous code is becoming very complex. At the same time synchronous code is growing because it is convenient to write. Sometimes duplicate code paths are even added, one synchronous and the other asynchronous. This patch introduces coroutines which allow code that looks synchronous but is asynchronous under the covers. A coroutine has its own stack and is therefore able to preserve state across blocking operations, which traditionally require callback functions and manual marshalling of parameters. Creating and starting a coroutine is easy: coroutine = qemu_coroutine_create(my_coroutine); qemu_coroutine_enter(coroutine, my_data); The coroutine then executes until it returns or yields: void coroutine_fn my_coroutine(void *opaque) { MyData *my_data = opaque; /* do some work */ qemu_coroutine_yield(); /* do some more work */ } Yielding switches control back to the caller of qemu_coroutine_enter(). This is typically used to switch back to the main thread's event loop after issuing an asynchronous I/O request. The request callback will then invoke qemu_coroutine_enter() once more to switch back to the coroutine. Note that if coroutines are used only from threads which hold the global mutex they will never execute concurrently. This makes programming with coroutines easier than with threads. Race conditions cannot occur since only one coroutine may be active at any time. Other coroutines can only run across yield. This coroutines implementation is based on the gtk-vnc implementation written by Anthony Liguori <anthony@codemonkey.ws> but it has been significantly rewritten by Kevin Wolf <kwolf@redhat.com> to use setjmp()/longjmp() instead of the more expensive swapcontext() and by Paolo Bonzini <pbonzini@redhat.com> for Windows Fibers support. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2011-01-17 17:08:14 +01:00
#######################################################################
# coroutines
coroutine-obj-y = qemu-coroutine.o qemu-coroutine-lock.o qemu-coroutine-io.o
coroutine-obj-y += qemu-coroutine-sleep.o
ifeq ($(CONFIG_UCONTEXT_COROUTINE),y)
coroutine: introduce coroutines Asynchronous code is becoming very complex. At the same time synchronous code is growing because it is convenient to write. Sometimes duplicate code paths are even added, one synchronous and the other asynchronous. This patch introduces coroutines which allow code that looks synchronous but is asynchronous under the covers. A coroutine has its own stack and is therefore able to preserve state across blocking operations, which traditionally require callback functions and manual marshalling of parameters. Creating and starting a coroutine is easy: coroutine = qemu_coroutine_create(my_coroutine); qemu_coroutine_enter(coroutine, my_data); The coroutine then executes until it returns or yields: void coroutine_fn my_coroutine(void *opaque) { MyData *my_data = opaque; /* do some work */ qemu_coroutine_yield(); /* do some more work */ } Yielding switches control back to the caller of qemu_coroutine_enter(). This is typically used to switch back to the main thread's event loop after issuing an asynchronous I/O request. The request callback will then invoke qemu_coroutine_enter() once more to switch back to the coroutine. Note that if coroutines are used only from threads which hold the global mutex they will never execute concurrently. This makes programming with coroutines easier than with threads. Race conditions cannot occur since only one coroutine may be active at any time. Other coroutines can only run across yield. This coroutines implementation is based on the gtk-vnc implementation written by Anthony Liguori <anthony@codemonkey.ws> but it has been significantly rewritten by Kevin Wolf <kwolf@redhat.com> to use setjmp()/longjmp() instead of the more expensive swapcontext() and by Paolo Bonzini <pbonzini@redhat.com> for Windows Fibers support. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2011-01-17 17:08:14 +01:00
coroutine-obj-$(CONFIG_POSIX) += coroutine-ucontext.o
else
ifeq ($(CONFIG_SIGALTSTACK_COROUTINE),y)
coroutine-obj-$(CONFIG_POSIX) += coroutine-sigaltstack.o
else
coroutine-obj-$(CONFIG_POSIX) += coroutine-gthread.o
endif
endif
coroutine: introduce coroutines Asynchronous code is becoming very complex. At the same time synchronous code is growing because it is convenient to write. Sometimes duplicate code paths are even added, one synchronous and the other asynchronous. This patch introduces coroutines which allow code that looks synchronous but is asynchronous under the covers. A coroutine has its own stack and is therefore able to preserve state across blocking operations, which traditionally require callback functions and manual marshalling of parameters. Creating and starting a coroutine is easy: coroutine = qemu_coroutine_create(my_coroutine); qemu_coroutine_enter(coroutine, my_data); The coroutine then executes until it returns or yields: void coroutine_fn my_coroutine(void *opaque) { MyData *my_data = opaque; /* do some work */ qemu_coroutine_yield(); /* do some more work */ } Yielding switches control back to the caller of qemu_coroutine_enter(). This is typically used to switch back to the main thread's event loop after issuing an asynchronous I/O request. The request callback will then invoke qemu_coroutine_enter() once more to switch back to the coroutine. Note that if coroutines are used only from threads which hold the global mutex they will never execute concurrently. This makes programming with coroutines easier than with threads. Race conditions cannot occur since only one coroutine may be active at any time. Other coroutines can only run across yield. This coroutines implementation is based on the gtk-vnc implementation written by Anthony Liguori <anthony@codemonkey.ws> but it has been significantly rewritten by Kevin Wolf <kwolf@redhat.com> to use setjmp()/longjmp() instead of the more expensive swapcontext() and by Paolo Bonzini <pbonzini@redhat.com> for Windows Fibers support. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2011-01-17 17:08:14 +01:00
coroutine-obj-$(CONFIG_WIN32) += coroutine-win32.o
#######################################################################
# block-obj-y is code used by both qemu system emulation and qemu-img
block-obj-y = iov.o cache-utils.o qemu-option.o module.o async.o
block-obj-y += nbd.o block.o blockjob.o aes.o qemu-config.o
block-obj-y += thread-pool.o qemu-progress.o qemu-sockets.o uri.o notify.o
block-obj-y += $(coroutine-obj-y) $(qobject-obj-y) $(version-obj-y)
block-obj-$(CONFIG_POSIX) += event_notifier-posix.o aio-posix.o
block-obj-$(CONFIG_WIN32) += event_notifier-win32.o aio-win32.o
block-obj-y += block/
block-obj-y += $(qapi-obj-y) qapi-types.o qapi-visit.o
ifeq ($(CONFIG_VIRTIO)$(CONFIG_VIRTFS)$(CONFIG_PCI),yyy)
# Lots of the fsdev/9pcode is pulled in by vl.c via qemu_fsdev_add.
# only pull in the actual virtio-9p device if we also enabled virtio.
CONFIG_REALLY_VIRTFS=y
endif
######################################################################
# Target independent part of system emulation. The long term path is to
# suppress *all* target specific code in case of system emulation, i.e. a
# single QEMU executable should support all CPUs and machines.
common-obj-y = $(block-obj-y) blockdev.o blockdev-nbd.o block/
common-obj-y += net.o net/
common-obj-y += qom/
common-obj-y += readline.o console.o cursor.o
common-obj-y += qemu-pixman.o
common-obj-y += $(oslib-obj-y)
common-obj-$(CONFIG_WIN32) += os-win32.o
common-obj-$(CONFIG_POSIX) += os-posix.o
common-obj-$(CONFIG_LINUX) += fsdev/
extra-obj-$(CONFIG_LINUX) += fsdev/
common-obj-y += tcg-runtime.o host-utils.o main-loop.o
common-obj-y += input.o
common-obj-y += buffered_file.o migration.o migration-tcp.o
common-obj-y += qemu-char.o #aio.o
common-obj-y += block-migration.o iohandler.o
common-obj-y += bitmap.o bitops.o
common-obj-y += page_cache.o
common-obj-$(CONFIG_POSIX) += migration-exec.o migration-unix.o migration-fd.o
common-obj-$(CONFIG_WIN32) += version.o
common-obj-$(CONFIG_SPICE) += spice-qemu-char.o
common-obj-y += audio/
common-obj-y += hw/
common-obj-y += ui/
common-obj-y += bt-host.o bt-vhci.o
common-obj-y += dma-helpers.o
common-obj-y += acl.o
common-obj-$(CONFIG_POSIX) += compatfd.o
common-obj-y += qemu-timer.o qemu-timer-common.o
common-obj-y += qtest.o
common-obj-y += vl.o
common-obj-$(CONFIG_SLIRP) += slirp/
common-obj-y += backends/
######################################################################
# libseccomp
ifeq ($(CONFIG_SECCOMP),y)
common-obj-y += qemu-seccomp.o
endif
######################################################################
# libuser
user-obj-y =
user-obj-y += envlist.o path.o
user-obj-y += tcg-runtime.o host-utils.o
user-obj-y += cache-utils.o
user-obj-y += module.o
user-obj-y += qemu-user.o
user-obj-y += $(trace-obj-y)
user-obj-y += qom/
######################################################################
# libdis
# NOTE: the disassembler code is only needed for debugging
libdis-y =
libdis-$(CONFIG_ALPHA_DIS) += alpha-dis.o
libdis-$(CONFIG_ARM_DIS) += arm-dis.o
libdis-$(CONFIG_CRIS_DIS) += cris-dis.o
libdis-$(CONFIG_HPPA_DIS) += hppa-dis.o
libdis-$(CONFIG_I386_DIS) += i386-dis.o
libdis-$(CONFIG_IA64_DIS) += ia64-dis.o
libdis-$(CONFIG_M68K_DIS) += m68k-dis.o
libdis-$(CONFIG_MICROBLAZE_DIS) += microblaze-dis.o
libdis-$(CONFIG_MIPS_DIS) += mips-dis.o
libdis-$(CONFIG_PPC_DIS) += ppc-dis.o
libdis-$(CONFIG_S390_DIS) += s390-dis.o
libdis-$(CONFIG_SH4_DIS) += sh4-dis.o
libdis-$(CONFIG_SPARC_DIS) += sparc-dis.o
libdis-$(CONFIG_LM32_DIS) += lm32-dis.o
######################################################################
# trace
ifeq ($(TRACE_BACKEND),dtrace)
TRACE_H_EXTRA_DEPS=trace-dtrace.h
endif
trace.h: trace.h-timestamp $(TRACE_H_EXTRA_DEPS)
trace.h-timestamp: $(SRC_PATH)/trace-events $(BUILD_DIR)/config-host.mak
$(call quiet-command,$(TRACETOOL) \
--format=h \
--backend=$(TRACE_BACKEND) \
< $< > $@," GEN trace.h")
@cmp -s $@ trace.h || cp $@ trace.h
trace.c: trace.c-timestamp
trace.c-timestamp: $(SRC_PATH)/trace-events $(BUILD_DIR)/config-host.mak
$(call quiet-command,$(TRACETOOL) \
--format=c \
--backend=$(TRACE_BACKEND) \
< $< > $@," GEN trace.c")
@cmp -s $@ trace.c || cp $@ trace.c
trace.o: trace.c $(GENERATED_HEADERS)
trace-dtrace.h: trace-dtrace.dtrace
$(call quiet-command,dtrace -o $@ -h -s $<, " GEN trace-dtrace.h")
# Normal practice is to name DTrace probe file with a '.d' extension
# but that gets picked up by QEMU's Makefile as an external dependency
# rule file. So we use '.dtrace' instead
trace-dtrace.dtrace: trace-dtrace.dtrace-timestamp
trace-dtrace.dtrace-timestamp: $(SRC_PATH)/trace-events $(BUILD_DIR)/config-host.mak
$(call quiet-command,$(TRACETOOL) \
--format=d \
--backend=$(TRACE_BACKEND) \
< $< > $@," GEN trace-dtrace.dtrace")
@cmp -s $@ trace-dtrace.dtrace || cp $@ trace-dtrace.dtrace
trace-dtrace.o: trace-dtrace.dtrace $(GENERATED_HEADERS)
$(call quiet-command,dtrace -o $@ -G -s $<, " GEN trace-dtrace.o")
ifeq ($(LIBTOOL),)
trace-dtrace.lo: trace-dtrace.dtrace
@echo "missing libtool. please install and rerun configure."; exit 1
else
trace-dtrace.lo: trace-dtrace.dtrace
$(call quiet-command,$(LIBTOOL) --mode=compile --tag=CC dtrace -o $@ -G -s $<, " lt GEN trace-dtrace.o")
endif
trace/simple.o: trace/simple.c $(GENERATED_HEADERS)
trace-obj-$(CONFIG_TRACE_DTRACE) += trace-dtrace.o
ifneq ($(TRACE_BACKEND),dtrace)
trace-obj-y = trace.o
Add a DTrace tracing backend targetted for SystemTAP compatability This introduces a new tracing backend that targets the SystemTAP implementation of DTrace userspace tracing. The core functionality should be applicable and standard across any DTrace implementation on Solaris, OS-X, *BSD, but the Makefile rules will likely need some small additional changes to cope with OS specific build requirements. This backend builds a little differently from the other tracing backends. Specifically there is no 'trace.c' file, because the 'dtrace' command line tool generates a '.o' file directly from the dtrace probe definition file. The probe definition is usually named with a '.d' extension but QEMU uses '.d' files for its external makefile dependancy tracking, so this uses '.dtrace' as the extension for the probe definition file. The 'tracetool' program gains the ability to generate a trace.h file for DTrace, and also to generate the trace.d file containing the dtrace probe definition. Example usage of a dtrace probe in systemtap looks like: probe process("qemu").mark("qemu_malloc") { printf("Malloc %d %p\n", $arg1, $arg2); } * .gitignore: Ignore trace-dtrace.* * Makefile: Extra rules for generating DTrace files * Makefile.obj: Don't build trace.o for DTrace, use trace-dtrace.o generated by 'dtrace' instead * tracetool: Support for generating DTrace data files Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-11-12 14:20:24 +01:00
endif
trace-obj-$(CONFIG_TRACE_DEFAULT) += trace/default.o
trace-obj-$(CONFIG_TRACE_SIMPLE) += trace/simple.o
trace-obj-$(CONFIG_TRACE_SIMPLE) += qemu-timer-common.o
trace-obj-$(CONFIG_TRACE_STDERR) += trace/stderr.o
trace-obj-y += trace/control.o
$(trace-obj-y): $(GENERATED_HEADERS)
libcacard: initial commit libcacard emulates a Common Access Card (CAC) which is a standard for smartcards. It is used by the emulated ccid card introduced in a following patch. Docs are available in docs/libcacard.txt Signed-off-by: Alon Levy <alevy@redhat.com> --- changes from v24->v25: * Fix out of tree builds. * Fix build with linux-user targets. changes from v23->v24: (Jes Sorensen review 2) * Makefile.target: use obj-$(CONFIG_*) += * remove unrequired includes, include qemu-common before qemu-thread * required adding #define NO_NSPR_10_SUPPORT (harmless) changes from v22->v23: * configure fixes: (reported by Stefan Hajnoczi) * test a = b, not a == b (second isn't portable) * quote $source_path in case it contains spaces - this doesn't really help since there are many other places that need similar fixes, not introduced by this patch. changes from v21->v22: * fix configure to not link libcacard if nss not found (reported by Stefan Hajnoczi) * fix vscclient linkage with simpletrace backend (reported by Stefan Hajnoczi) * card_7816.c: add missing break in ERROR_DATA_NOT_FOUND (reported by William van de Velde) changes from v20->v21: (Jes Sorensen review) * use qemu infrastructure: qemu-thread, qemu-common (qemu_malloc and qemu_free), error_report * assert instead of ASSERT * cosmetic fixes * use strpbrk and isspace * add --disable-nss --enable-nss here, instead of in the final patch. * split vscclient, passthru and docs to following patches. changes from v19->v20: * checkpatch.pl changes from v15->v16: Build: * don't erase self with distclean * fix make clean after make distclean * Makefile: make vscclient link quiet Behavioral: * vcard_emul_nss: load coolkey in more situations * vscclient: * use hton,ntoh * send init on connect, only start vevent thread on response * read payload after header check, before type switch * remove Reconnect * update for vscard_common changes, empty Flush implementation Style/Whitespace: * fix wrong variable usage * remove unused variable * use only C style comments * add copyright header * fix tabulation Signed-off-by: Alon Levy <alevy@redhat.com> libcacard: fix out of tree builds
2010-11-28 15:36:38 +01:00
######################################################################
# smartcard
libcacard-y += libcacard/cac.o libcacard/event.o
libcacard-y += libcacard/vcard.o libcacard/vreader.o
libcacard-y += libcacard/vcard_emul_nss.o
libcacard-y += libcacard/vcard_emul_type.o
libcacard-y += libcacard/card_7816.o
common-obj-$(CONFIG_SMARTCARD_NSS) += $(libcacard-y)
libcacard: initial commit libcacard emulates a Common Access Card (CAC) which is a standard for smartcards. It is used by the emulated ccid card introduced in a following patch. Docs are available in docs/libcacard.txt Signed-off-by: Alon Levy <alevy@redhat.com> --- changes from v24->v25: * Fix out of tree builds. * Fix build with linux-user targets. changes from v23->v24: (Jes Sorensen review 2) * Makefile.target: use obj-$(CONFIG_*) += * remove unrequired includes, include qemu-common before qemu-thread * required adding #define NO_NSPR_10_SUPPORT (harmless) changes from v22->v23: * configure fixes: (reported by Stefan Hajnoczi) * test a = b, not a == b (second isn't portable) * quote $source_path in case it contains spaces - this doesn't really help since there are many other places that need similar fixes, not introduced by this patch. changes from v21->v22: * fix configure to not link libcacard if nss not found (reported by Stefan Hajnoczi) * fix vscclient linkage with simpletrace backend (reported by Stefan Hajnoczi) * card_7816.c: add missing break in ERROR_DATA_NOT_FOUND (reported by William van de Velde) changes from v20->v21: (Jes Sorensen review) * use qemu infrastructure: qemu-thread, qemu-common (qemu_malloc and qemu_free), error_report * assert instead of ASSERT * cosmetic fixes * use strpbrk and isspace * add --disable-nss --enable-nss here, instead of in the final patch. * split vscclient, passthru and docs to following patches. changes from v19->v20: * checkpatch.pl changes from v15->v16: Build: * don't erase self with distclean * fix make clean after make distclean * Makefile: make vscclient link quiet Behavioral: * vcard_emul_nss: load coolkey in more situations * vscclient: * use hton,ntoh * send init on connect, only start vevent thread on response * read payload after header check, before type switch * remove Reconnect * update for vscard_common changes, empty Flush implementation Style/Whitespace: * fix wrong variable usage * remove unused variable * use only C style comments * add copyright header * fix tabulation Signed-off-by: Alon Levy <alevy@redhat.com> libcacard: fix out of tree builds
2010-11-28 15:36:38 +01:00
######################################################################
# qapi
qapi-obj-y = qapi/
qapi-obj-y += qapi-types.o qapi-visit.o
common-obj-y += qmp-marshal.o qapi-visit.o qapi-types.o
common-obj-y += qmp.o hmp.o
universal-obj-y += $(qapi-obj-y)
######################################################################
# guest agent
qga-obj-y = qga/ qemu-ga.o module.o qemu-tool.o
qga-obj-$(CONFIG_POSIX) += qemu-sockets.o qemu-option.o
vl.o: QEMU_CFLAGS+=$(GPROF_CFLAGS)
vl.o: QEMU_CFLAGS+=$(SDL_CFLAGS)
QEMU_CFLAGS+=$(GLIB_CFLAGS)
nested-vars += \
stub-obj-y \
qga-obj-y \
qom-obj-y \
qapi-obj-y \
block-obj-y \
user-obj-y \
common-obj-y \
extra-obj-y
dummy := $(call unnest-vars)