qemu-e2k/backends/hostmem.c

Ignoring revisions in .git-blame-ignore-revs. Click here to bypass and see the normal blame view.

581 lines
18 KiB
C
Raw Normal View History

/*
* QEMU Host Memory Backend
*
* Copyright (C) 2013-2014 Red Hat Inc
*
* Authors:
* Igor Mammedov <imammedo@redhat.com>
*
* This work is licensed under the terms of the GNU GPL, version 2 or later.
* See the COPYING file in the top-level directory.
*/
#include "qemu/osdep.h"
#include "sysemu/hostmem.h"
#include "hw/boards.h"
2016-03-14 09:01:28 +01:00
#include "qapi/error.h"
#include "qapi/qapi-builtin-visit.h"
#include "qapi/visitor.h"
#include "qemu/config-file.h"
#include "qom/object_interfaces.h"
#include "qemu/mmap-alloc.h"
#include "qemu/madvise.h"
#ifdef CONFIG_NUMA
#include <numaif.h>
#include <numa.h>
QEMU_BUILD_BUG_ON(HOST_MEM_POLICY_DEFAULT != MPOL_DEFAULT);
/*
* HOST_MEM_POLICY_PREFERRED may either translate to MPOL_PREFERRED or
* MPOL_PREFERRED_MANY, see comments further below.
*/
QEMU_BUILD_BUG_ON(HOST_MEM_POLICY_PREFERRED != MPOL_PREFERRED);
QEMU_BUILD_BUG_ON(HOST_MEM_POLICY_BIND != MPOL_BIND);
QEMU_BUILD_BUG_ON(HOST_MEM_POLICY_INTERLEAVE != MPOL_INTERLEAVE);
#endif
char *
host_memory_backend_get_name(HostMemoryBackend *backend)
{
if (!backend->use_canonical_path) {
return g_strdup(object_get_canonical_path_component(OBJECT(backend)));
}
return object_get_canonical_path(OBJECT(backend));
}
static void
host_memory_backend_get_size(Object *obj, Visitor *v, const char *name,
void *opaque, Error **errp)
{
HostMemoryBackend *backend = MEMORY_BACKEND(obj);
uint64_t value = backend->size;
qapi: Swap visit_* arguments for consistent 'name' placement JSON uses "name":value, but many of our visitor interfaces were called with visit_type_FOO(v, &value, name, errp). This can be a bit confusing to have to mentally swap the parameter order to match JSON order. It's particularly bad for visit_start_struct(), where the 'name' parameter is smack in the middle of the otherwise-related group of 'obj, kind, size' parameters! It's time to do a global swap of the parameter ordering, so that the 'name' parameter is always immediately after the Visitor argument. Additional reason in favor of the swap: the existing include/qjson.h prefers listing 'name' first in json_prop_*(), and I have plans to unify that file with the qapi visitors; listing 'name' first in qapi will minimize churn to the (admittedly few) qjson.h clients. Later patches will then fix docs, object.h, visitor-impl.h, and those clients to match. Done by first patching scripts/qapi*.py by hand to make generated files do what I want, then by running the following Coccinelle script to affect the rest of the code base: $ spatch --sp-file script `git grep -l '\bvisit_' -- '**/*.[ch]'` I then had to apply some touchups (Coccinelle insisted on TAB indentation in visitor.h, and botched the signature of visit_type_enum() by rewriting 'const char *const strings[]' to the syntactically invalid 'const char*const[] strings'). The movement of parameters is sufficient to provoke compiler errors if any callers were missed. // Part 1: Swap declaration order @@ type TV, TErr, TObj, T1, T2; identifier OBJ, ARG1, ARG2; @@ void visit_start_struct -(TV v, TObj OBJ, T1 ARG1, const char *name, T2 ARG2, TErr errp) +(TV v, const char *name, TObj OBJ, T1 ARG1, T2 ARG2, TErr errp) { ... } @@ type bool, TV, T1; identifier ARG1; @@ bool visit_optional -(TV v, T1 ARG1, const char *name) +(TV v, const char *name, T1 ARG1) { ... } @@ type TV, TErr, TObj, T1; identifier OBJ, ARG1; @@ void visit_get_next_type -(TV v, TObj OBJ, T1 ARG1, const char *name, TErr errp) +(TV v, const char *name, TObj OBJ, T1 ARG1, TErr errp) { ... } @@ type TV, TErr, TObj, T1, T2; identifier OBJ, ARG1, ARG2; @@ void visit_type_enum -(TV v, TObj OBJ, T1 ARG1, T2 ARG2, const char *name, TErr errp) +(TV v, const char *name, TObj OBJ, T1 ARG1, T2 ARG2, TErr errp) { ... } @@ type TV, TErr, TObj; identifier OBJ; identifier VISIT_TYPE =~ "^visit_type_"; @@ void VISIT_TYPE -(TV v, TObj OBJ, const char *name, TErr errp) +(TV v, const char *name, TObj OBJ, TErr errp) { ... } // Part 2: swap caller order @@ expression V, NAME, OBJ, ARG1, ARG2, ERR; identifier VISIT_TYPE =~ "^visit_type_"; @@ ( -visit_start_struct(V, OBJ, ARG1, NAME, ARG2, ERR) +visit_start_struct(V, NAME, OBJ, ARG1, ARG2, ERR) | -visit_optional(V, ARG1, NAME) +visit_optional(V, NAME, ARG1) | -visit_get_next_type(V, OBJ, ARG1, NAME, ERR) +visit_get_next_type(V, NAME, OBJ, ARG1, ERR) | -visit_type_enum(V, OBJ, ARG1, ARG2, NAME, ERR) +visit_type_enum(V, NAME, OBJ, ARG1, ARG2, ERR) | -VISIT_TYPE(V, OBJ, NAME, ERR) +VISIT_TYPE(V, NAME, OBJ, ERR) ) Signed-off-by: Eric Blake <eblake@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <1454075341-13658-19-git-send-email-eblake@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-01-29 14:48:54 +01:00
visit_type_size(v, name, &value, errp);
}
static void
host_memory_backend_set_size(Object *obj, Visitor *v, const char *name,
void *opaque, Error **errp)
{
HostMemoryBackend *backend = MEMORY_BACKEND(obj);
uint64_t value;
if (host_memory_backend_mr_inited(backend)) {
error_setg(errp, "cannot change property %s of %s ", name,
object_get_typename(obj));
return;
}
error: Eliminate error_propagate() with Coccinelle, part 1 When all we do with an Error we receive into a local variable is propagating to somewhere else, we can just as well receive it there right away. Convert if (!foo(..., &err)) { ... error_propagate(errp, err); ... return ... } to if (!foo(..., errp)) { ... ... return ... } where nothing else needs @err. Coccinelle script: @rule1 forall@ identifier fun, err, errp, lbl; expression list args, args2; binary operator op; constant c1, c2; symbol false; @@ if ( ( - fun(args, &err, args2) + fun(args, errp, args2) | - !fun(args, &err, args2) + !fun(args, errp, args2) | - fun(args, &err, args2) op c1 + fun(args, errp, args2) op c1 ) ) { ... when != err when != lbl: when strict - error_propagate(errp, err); ... when != err ( return; | return c2; | return false; ) } @rule2 forall@ identifier fun, err, errp, lbl; expression list args, args2; expression var; binary operator op; constant c1, c2; symbol false; @@ - var = fun(args, &err, args2); + var = fun(args, errp, args2); ... when != err if ( ( var | !var | var op c1 ) ) { ... when != err when != lbl: when strict - error_propagate(errp, err); ... when != err ( return; | return c2; | return false; | return var; ) } @depends on rule1 || rule2@ identifier err; @@ - Error *err = NULL; ... when != err Not exactly elegant, I'm afraid. The "when != lbl:" is necessary to avoid transforming if (fun(args, &err)) { goto out } ... out: error_propagate(errp, err); even though other paths to label out still need the error_propagate(). For an actual example, see sclp_realize(). Without the "when strict", Coccinelle transforms vfio_msix_setup(), incorrectly. I don't know what exactly "when strict" does, only that it helps here. The match of return is narrower than what I want, but I can't figure out how to express "return where the operand doesn't use @err". For an example where it's too narrow, see vfio_intx_enable(). Silently fails to convert hw/arm/armsse.c, because Coccinelle gets confused by ARMSSE being used both as typedef and function-like macro there. Converted manually. Line breaks tidied up manually. One nested declaration of @local_err deleted manually. Preexisting unwanted blank line dropped in hw/riscv/sifive_e.c. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-Id: <20200707160613.848843-35-armbru@redhat.com>
2020-07-07 18:06:02 +02:00
if (!visit_type_size(v, name, &value, errp)) {
return;
}
if (!value) {
error_setg(errp,
"property '%s' of %s doesn't take value '%" PRIu64 "'",
name, object_get_typename(obj), value);
return;
}
backend->size = value;
}
static void
host_memory_backend_get_host_nodes(Object *obj, Visitor *v, const char *name,
void *opaque, Error **errp)
{
HostMemoryBackend *backend = MEMORY_BACKEND(obj);
uint16List *host_nodes = NULL;
uint16List **tail = &host_nodes;
unsigned long value;
value = find_first_bit(backend->host_nodes, MAX_NODES);
if (value == MAX_NODES) {
goto ret;
}
QAPI_LIST_APPEND(tail, value);
Revert "hostmem: fix QEMU crash by 'info memdev'" This reverts commit 1454d33f0507cb54d62ed80f494884157c9e7130. The string input visitor regression fixed in the previous commit made visit_type_uint16List() fail on empty input. query_memdev() calls it via object_property_get_uint16List(). Because it doesn't expect it to fail, it passes &error_abort, and duly crashes. Commit 1454d33 "fixes" this crash by making host_memory_backend_get_host_nodes() return a list containing just MAX_NODES instead of the empty list. Papers over the regression, and leads to bogus "info memdev" output, as shown below; revert. I suspect that if we had bisected the crash back then, we would have found and fixed the actual bug instead of papering over it. To reproduce, run HMP command "info memdev" with $ qemu-system-x86_64 --nodefaults -S -display none -monitor stdio -object memory-backend-ram,id=mem1,size=4k With this commit, "info memdev" prints memory backend: mem1 size: 4096 merge: true dump: true prealloc: false policy: default host nodes: exactly like before commit 74f24cb. Between commit 1454d33 and this commit, it prints memory backend: mem1 size: 4096 merge: true dump: true prealloc: false policy: default host nodes: 128 The last line is bogus. Between commit 74f24cb and 1454d33, it crashes like this: Unexpected error in parse_str() at /work/armbru/tmp/qemu/qapi/string-input-visitor.c:126: Parameter 'null' expects an int64 value or range Aborted (core dumped) Cc: Xiao Guangrong <guangrong.xiao@linux.intel.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <1490026424-11330-3-git-send-email-armbru@redhat.com> Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2017-03-20 17:13:44 +01:00
do {
value = find_next_bit(backend->host_nodes, MAX_NODES, value + 1);
if (value == MAX_NODES) {
break;
}
QAPI_LIST_APPEND(tail, value);
} while (true);
ret:
qapi: Swap visit_* arguments for consistent 'name' placement JSON uses "name":value, but many of our visitor interfaces were called with visit_type_FOO(v, &value, name, errp). This can be a bit confusing to have to mentally swap the parameter order to match JSON order. It's particularly bad for visit_start_struct(), where the 'name' parameter is smack in the middle of the otherwise-related group of 'obj, kind, size' parameters! It's time to do a global swap of the parameter ordering, so that the 'name' parameter is always immediately after the Visitor argument. Additional reason in favor of the swap: the existing include/qjson.h prefers listing 'name' first in json_prop_*(), and I have plans to unify that file with the qapi visitors; listing 'name' first in qapi will minimize churn to the (admittedly few) qjson.h clients. Later patches will then fix docs, object.h, visitor-impl.h, and those clients to match. Done by first patching scripts/qapi*.py by hand to make generated files do what I want, then by running the following Coccinelle script to affect the rest of the code base: $ spatch --sp-file script `git grep -l '\bvisit_' -- '**/*.[ch]'` I then had to apply some touchups (Coccinelle insisted on TAB indentation in visitor.h, and botched the signature of visit_type_enum() by rewriting 'const char *const strings[]' to the syntactically invalid 'const char*const[] strings'). The movement of parameters is sufficient to provoke compiler errors if any callers were missed. // Part 1: Swap declaration order @@ type TV, TErr, TObj, T1, T2; identifier OBJ, ARG1, ARG2; @@ void visit_start_struct -(TV v, TObj OBJ, T1 ARG1, const char *name, T2 ARG2, TErr errp) +(TV v, const char *name, TObj OBJ, T1 ARG1, T2 ARG2, TErr errp) { ... } @@ type bool, TV, T1; identifier ARG1; @@ bool visit_optional -(TV v, T1 ARG1, const char *name) +(TV v, const char *name, T1 ARG1) { ... } @@ type TV, TErr, TObj, T1; identifier OBJ, ARG1; @@ void visit_get_next_type -(TV v, TObj OBJ, T1 ARG1, const char *name, TErr errp) +(TV v, const char *name, TObj OBJ, T1 ARG1, TErr errp) { ... } @@ type TV, TErr, TObj, T1, T2; identifier OBJ, ARG1, ARG2; @@ void visit_type_enum -(TV v, TObj OBJ, T1 ARG1, T2 ARG2, const char *name, TErr errp) +(TV v, const char *name, TObj OBJ, T1 ARG1, T2 ARG2, TErr errp) { ... } @@ type TV, TErr, TObj; identifier OBJ; identifier VISIT_TYPE =~ "^visit_type_"; @@ void VISIT_TYPE -(TV v, TObj OBJ, const char *name, TErr errp) +(TV v, const char *name, TObj OBJ, TErr errp) { ... } // Part 2: swap caller order @@ expression V, NAME, OBJ, ARG1, ARG2, ERR; identifier VISIT_TYPE =~ "^visit_type_"; @@ ( -visit_start_struct(V, OBJ, ARG1, NAME, ARG2, ERR) +visit_start_struct(V, NAME, OBJ, ARG1, ARG2, ERR) | -visit_optional(V, ARG1, NAME) +visit_optional(V, NAME, ARG1) | -visit_get_next_type(V, OBJ, ARG1, NAME, ERR) +visit_get_next_type(V, NAME, OBJ, ARG1, ERR) | -visit_type_enum(V, OBJ, ARG1, ARG2, NAME, ERR) +visit_type_enum(V, NAME, OBJ, ARG1, ARG2, ERR) | -VISIT_TYPE(V, OBJ, NAME, ERR) +VISIT_TYPE(V, NAME, OBJ, ERR) ) Signed-off-by: Eric Blake <eblake@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <1454075341-13658-19-git-send-email-eblake@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-01-29 14:48:54 +01:00
visit_type_uint16List(v, name, &host_nodes, errp);
bugfix: hostmem: Free host_nodes list right after visited In host_memory_backend_get_host_nodes, we build host_nodes list and output it to v (a StringOutputVisitor) but forget to free the list. This fixes the memory leak. The memory leak stack: Direct leak of 32 byte(s) in 2 object(s) allocated from: #0 0xfffda30b3393 in __interceptor_calloc (/usr/lib64/libasan.so.4+0xd3393) #1 0xfffda1d28b9b in g_malloc0 (/usr/lib64/libglib-2.0.so.0+0x58b9b) #2 0xaaab05ca6e43 in host_memory_backend_get_host_nodes backends/hostmem.c:94 #3 0xaaab061ddf83 in object_property_get_uint16List qom/object.c:1478 #4 0xaaab05866513 in query_memdev hw/core/machine-qmp-cmds.c:312 #5 0xaaab061d980b in do_object_child_foreach qom/object.c:1001 #6 0xaaab0586779b in qmp_query_memdev hw/core/machine-qmp-cmds.c:328 #7 0xaaab0615ed3f in qmp_marshal_query_memdev qapi/qapi-commands-machine.c:327 #8 0xaaab0632d647 in do_qmp_dispatch qapi/qmp-dispatch.c:147 #9 0xaaab0632d647 in qmp_dispatch qapi/qmp-dispatch.c:190 #10 0xaaab0610f74b in monitor_qmp_dispatch monitor/qmp.c:120 #11 0xaaab0611074b in monitor_qmp_bh_dispatcher monitor/qmp.c:209 #12 0xaaab063caefb in aio_bh_poll util/async.c:117 #13 0xaaab063d30fb in aio_dispatch util/aio-posix.c:459 #14 0xaaab063cac8f in aio_ctx_dispatch util/async.c:268 #15 0xfffda1d22a6b in g_main_context_dispatch (/usr/lib64/libglib-2.0.so.0+0x52a6b) #16 0xaaab063d0e97 in glib_pollfds_poll util/main-loop.c:218 #17 0xaaab063d0e97 in os_host_main_loop_wait util/main-loop.c:241 #18 0xaaab063d0e97 in main_loop_wait util/main-loop.c:517 #19 0xaaab05c8bfa7 in main_loop /root/rpmbuild/BUILD/qemu-4.1.0/vl.c:1791 #20 0xaaab05713bc3 in main /root/rpmbuild/BUILD/qemu-4.1.0/vl.c:4473 #21 0xfffda0a83ebf in __libc_start_main (/usr/lib64/libc.so.6+0x23ebf) #22 0xaaab0571ed5f (aarch64-softmmu/qemu-system-aarch64+0x88ed5f) SUMMARY: AddressSanitizer: 32 byte(s) leaked in 2 allocation(s). Fixes: 4cf1b76bf1e2 (hostmem: add properties for NUMA memory policy) Reported-by: Euler Robot <euler.robot@huawei.com> Signed-off-by: Keqian Zhu <zhukeqian1@huawei.com> Tested-by: Chen Qun <kuhn.chenqun@huawei.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Message-Id: <20201210075226.20196-1-zhukeqian1@huawei.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2020-12-10 08:52:26 +01:00
qapi_free_uint16List(host_nodes);
}
static void
host_memory_backend_set_host_nodes(Object *obj, Visitor *v, const char *name,
void *opaque, Error **errp)
{
#ifdef CONFIG_NUMA
HostMemoryBackend *backend = MEMORY_BACKEND(obj);
uint16List *l, *host_nodes = NULL;
visit_type_uint16List(v, name, &host_nodes, errp);
for (l = host_nodes; l; l = l->next) {
if (l->value >= MAX_NODES) {
error_setg(errp, "Invalid host-nodes value: %d", l->value);
goto out;
}
}
for (l = host_nodes; l; l = l->next) {
bitmap_set(backend->host_nodes, l->value, 1);
}
out:
qapi_free_uint16List(host_nodes);
#else
error_setg(errp, "NUMA node binding are not supported by this QEMU");
#endif
}
static int
host_memory_backend_get_policy(Object *obj, Error **errp G_GNUC_UNUSED)
{
HostMemoryBackend *backend = MEMORY_BACKEND(obj);
return backend->policy;
}
static void
host_memory_backend_set_policy(Object *obj, int policy, Error **errp)
{
HostMemoryBackend *backend = MEMORY_BACKEND(obj);
backend->policy = policy;
#ifndef CONFIG_NUMA
if (policy != HOST_MEM_POLICY_DEFAULT) {
error_setg(errp, "NUMA policies are not supported by this QEMU");
}
#endif
}
static bool host_memory_backend_get_merge(Object *obj, Error **errp)
{
HostMemoryBackend *backend = MEMORY_BACKEND(obj);
return backend->merge;
}
static void host_memory_backend_set_merge(Object *obj, bool value, Error **errp)
{
HostMemoryBackend *backend = MEMORY_BACKEND(obj);
if (!host_memory_backend_mr_inited(backend)) {
backend->merge = value;
return;
}
if (value != backend->merge) {
void *ptr = memory_region_get_ram_ptr(&backend->mr);
uint64_t sz = memory_region_size(&backend->mr);
qemu_madvise(ptr, sz,
value ? QEMU_MADV_MERGEABLE : QEMU_MADV_UNMERGEABLE);
backend->merge = value;
}
}
static bool host_memory_backend_get_dump(Object *obj, Error **errp)
{
HostMemoryBackend *backend = MEMORY_BACKEND(obj);
return backend->dump;
}
static void host_memory_backend_set_dump(Object *obj, bool value, Error **errp)
{
HostMemoryBackend *backend = MEMORY_BACKEND(obj);
if (!host_memory_backend_mr_inited(backend)) {
backend->dump = value;
return;
}
if (value != backend->dump) {
void *ptr = memory_region_get_ram_ptr(&backend->mr);
uint64_t sz = memory_region_size(&backend->mr);
qemu_madvise(ptr, sz,
value ? QEMU_MADV_DODUMP : QEMU_MADV_DONTDUMP);
backend->dump = value;
}
}
static bool host_memory_backend_get_prealloc(Object *obj, Error **errp)
{
HostMemoryBackend *backend = MEMORY_BACKEND(obj);
hostmem: fix strict bind policy When option -mem-prealloc is used with one or more memory-backend objects, created backends may not obey configured bind policy or creation may fail after kernel attempts to move pages according to bind policy. Reason is in file_ram_alloc(), which will pre-allocate any descriptor based RAM if global mem_prealloc != 0 and that happens way before bind policy is applied to memory range. One way to fix it would be to extend memory_region_foo() API and add more invariants that could broken later due implicit dependencies that's hard to track. Another approach is to drop adhoc main RAM allocation and consolidate it around memory-backend. That allows to have single place that allocates guest RAM (main and memdev) in the same way and then global mem_prealloc could be replaced by backend's property[s] that will affect created memory-backend objects but only in correct order this time. With main RAM now converted to hostmem backends, there is no point in keeping global mem_prealloc around, so alias -mem-prealloc to "memory-backend.prealloc=on" machine compat[*] property and make mem_prealloc a local variable to only stir registration of compat property. *) currently user accessible -global works only with DEVICE based objects and extra work is needed to make it work with hostmem backends. But that is convenience option and out of scope of this already huge refactoring. Hence machine compat properties were used. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Message-Id: <20200219160953.13771-78-imammedo@redhat.com>
2020-02-19 17:09:51 +01:00
return backend->prealloc;
}
static void host_memory_backend_set_prealloc(Object *obj, bool value,
Error **errp)
{
Error *local_err = NULL;
HostMemoryBackend *backend = MEMORY_BACKEND(obj);
if (!backend->reserve && value) {
error_setg(errp, "'prealloc=on' and 'reserve=off' are incompatible");
return;
}
if (!host_memory_backend_mr_inited(backend)) {
backend->prealloc = value;
return;
}
if (value && !backend->prealloc) {
int fd = memory_region_get_fd(&backend->mr);
void *ptr = memory_region_get_ram_ptr(&backend->mr);
uint64_t sz = memory_region_size(&backend->mr);
qemu_prealloc_mem(fd, ptr, sz, backend->prealloc_threads,
backend->prealloc_context, &local_err);
if (local_err) {
error_propagate(errp, local_err);
return;
}
backend->prealloc = true;
}
}
static void host_memory_backend_get_prealloc_threads(Object *obj, Visitor *v,
const char *name, void *opaque, Error **errp)
{
HostMemoryBackend *backend = MEMORY_BACKEND(obj);
visit_type_uint32(v, name, &backend->prealloc_threads, errp);
}
static void host_memory_backend_set_prealloc_threads(Object *obj, Visitor *v,
const char *name, void *opaque, Error **errp)
{
HostMemoryBackend *backend = MEMORY_BACKEND(obj);
uint32_t value;
error: Eliminate error_propagate() with Coccinelle, part 1 When all we do with an Error we receive into a local variable is propagating to somewhere else, we can just as well receive it there right away. Convert if (!foo(..., &err)) { ... error_propagate(errp, err); ... return ... } to if (!foo(..., errp)) { ... ... return ... } where nothing else needs @err. Coccinelle script: @rule1 forall@ identifier fun, err, errp, lbl; expression list args, args2; binary operator op; constant c1, c2; symbol false; @@ if ( ( - fun(args, &err, args2) + fun(args, errp, args2) | - !fun(args, &err, args2) + !fun(args, errp, args2) | - fun(args, &err, args2) op c1 + fun(args, errp, args2) op c1 ) ) { ... when != err when != lbl: when strict - error_propagate(errp, err); ... when != err ( return; | return c2; | return false; ) } @rule2 forall@ identifier fun, err, errp, lbl; expression list args, args2; expression var; binary operator op; constant c1, c2; symbol false; @@ - var = fun(args, &err, args2); + var = fun(args, errp, args2); ... when != err if ( ( var | !var | var op c1 ) ) { ... when != err when != lbl: when strict - error_propagate(errp, err); ... when != err ( return; | return c2; | return false; | return var; ) } @depends on rule1 || rule2@ identifier err; @@ - Error *err = NULL; ... when != err Not exactly elegant, I'm afraid. The "when != lbl:" is necessary to avoid transforming if (fun(args, &err)) { goto out } ... out: error_propagate(errp, err); even though other paths to label out still need the error_propagate(). For an actual example, see sclp_realize(). Without the "when strict", Coccinelle transforms vfio_msix_setup(), incorrectly. I don't know what exactly "when strict" does, only that it helps here. The match of return is narrower than what I want, but I can't figure out how to express "return where the operand doesn't use @err". For an example where it's too narrow, see vfio_intx_enable(). Silently fails to convert hw/arm/armsse.c, because Coccinelle gets confused by ARMSSE being used both as typedef and function-like macro there. Converted manually. Line breaks tidied up manually. One nested declaration of @local_err deleted manually. Preexisting unwanted blank line dropped in hw/riscv/sifive_e.c. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-Id: <20200707160613.848843-35-armbru@redhat.com>
2020-07-07 18:06:02 +02:00
if (!visit_type_uint32(v, name, &value, errp)) {
return;
}
if (value <= 0) {
error_setg(errp, "property '%s' of %s doesn't take value '%d'", name,
object_get_typename(obj), value);
return;
}
backend->prealloc_threads = value;
}
static void host_memory_backend_init(Object *obj)
{
HostMemoryBackend *backend = MEMORY_BACKEND(obj);
MachineState *machine = MACHINE(qdev_get_machine());
/* TODO: convert access to globals to compat properties */
backend->merge = machine_mem_merge(machine);
backend->dump = machine_dump_guest_core(machine);
backend->reserve = true;
backend->prealloc_threads = machine->smp.cpus;
}
static void host_memory_backend_post_init(Object *obj)
{
object_apply_compat_props(obj);
}
bool host_memory_backend_mr_inited(HostMemoryBackend *backend)
{
/*
* NOTE: We forbid zero-length memory backend, so here zero means
* "we haven't inited the backend memory region yet".
*/
return memory_region_size(&backend->mr) != 0;
}
MemoryRegion *host_memory_backend_get_memory(HostMemoryBackend *backend)
{
return host_memory_backend_mr_inited(backend) ? &backend->mr : NULL;
}
void host_memory_backend_set_mapped(HostMemoryBackend *backend, bool mapped)
{
backend->is_mapped = mapped;
}
bool host_memory_backend_is_mapped(HostMemoryBackend *backend)
{
return backend->is_mapped;
}
size_t host_memory_backend_pagesize(HostMemoryBackend *memdev)
{
size_t pagesize = qemu_ram_pagesize(memdev->mr.ram_block);
g_assert(pagesize >= qemu_real_host_page_size());
return pagesize;
}
static void
host_memory_backend_memory_complete(UserCreatable *uc, Error **errp)
{
HostMemoryBackend *backend = MEMORY_BACKEND(uc);
HostMemoryBackendClass *bc = MEMORY_BACKEND_GET_CLASS(uc);
Error *local_err = NULL;
void *ptr;
uint64_t sz;
if (bc->alloc) {
bc->alloc(backend, &local_err);
if (local_err) {
goto out;
}
ptr = memory_region_get_ram_ptr(&backend->mr);
sz = memory_region_size(&backend->mr);
if (backend->merge) {
qemu_madvise(ptr, sz, QEMU_MADV_MERGEABLE);
}
if (!backend->dump) {
qemu_madvise(ptr, sz, QEMU_MADV_DONTDUMP);
}
#ifdef CONFIG_NUMA
unsigned long lastbit = find_last_bit(backend->host_nodes, MAX_NODES);
/* lastbit == MAX_NODES means maxnode = 0 */
unsigned long maxnode = (lastbit + 1) % (MAX_NODES + 1);
/* ensure policy won't be ignored in case memory is preallocated
* before mbind(). note: MPOL_MF_STRICT is ignored on hugepages so
* this doesn't catch hugepage case. */
unsigned flags = MPOL_MF_STRICT | MPOL_MF_MOVE;
int mode = backend->policy;
/* check for invalid host-nodes and policies and give more verbose
* error messages than mbind(). */
if (maxnode && backend->policy == MPOL_DEFAULT) {
error_setg(errp, "host-nodes must be empty for policy default,"
" or you should explicitly specify a policy other"
" than default");
return;
} else if (maxnode == 0 && backend->policy != MPOL_DEFAULT) {
error_setg(errp, "host-nodes must be set for policy %s",
HostMemPolicy_str(backend->policy));
return;
}
/* We can have up to MAX_NODES nodes, but we need to pass maxnode+1
* as argument to mbind() due to an old Linux bug (feature?) which
* cuts off the last specified node. This means backend->host_nodes
* must have MAX_NODES+1 bits available.
*/
assert(sizeof(backend->host_nodes) >=
BITS_TO_LONGS(MAX_NODES + 1) * sizeof(unsigned long));
assert(maxnode <= MAX_NODES);
#ifdef HAVE_NUMA_HAS_PREFERRED_MANY
if (mode == MPOL_PREFERRED && numa_has_preferred_many() > 0) {
/*
* Replace with MPOL_PREFERRED_MANY otherwise the mbind() below
* silently picks the first node.
*/
mode = MPOL_PREFERRED_MANY;
}
#endif
if (maxnode &&
mbind(ptr, sz, mode, backend->host_nodes, maxnode + 1, flags)) {
if (backend->policy != MPOL_DEFAULT || errno != ENOSYS) {
error_setg_errno(errp, errno,
"cannot bind memory to host NUMA nodes");
return;
}
}
#endif
/* Preallocate memory after the NUMA policy has been instantiated.
* This is necessary to guarantee memory is allocated with
* specified NUMA policy in place.
*/
if (backend->prealloc) {
qemu_prealloc_mem(memory_region_get_fd(&backend->mr), ptr, sz,
backend->prealloc_threads,
backend->prealloc_context, &local_err);
if (local_err) {
goto out;
}
}
}
out:
error_propagate(errp, local_err);
}
static bool
host_memory_backend_can_be_deleted(UserCreatable *uc)
{
if (host_memory_backend_is_mapped(MEMORY_BACKEND(uc))) {
return false;
} else {
return true;
}
}
static bool host_memory_backend_get_share(Object *o, Error **errp)
{
HostMemoryBackend *backend = MEMORY_BACKEND(o);
return backend->share;
}
static void host_memory_backend_set_share(Object *o, bool value, Error **errp)
{
HostMemoryBackend *backend = MEMORY_BACKEND(o);
if (host_memory_backend_mr_inited(backend)) {
error_setg(errp, "cannot change property value");
return;
}
backend->share = value;
}
#ifdef CONFIG_LINUX
static bool host_memory_backend_get_reserve(Object *o, Error **errp)
{
HostMemoryBackend *backend = MEMORY_BACKEND(o);
return backend->reserve;
}
static void host_memory_backend_set_reserve(Object *o, bool value, Error **errp)
{
HostMemoryBackend *backend = MEMORY_BACKEND(o);
if (host_memory_backend_mr_inited(backend)) {
error_setg(errp, "cannot change property value");
return;
}
if (backend->prealloc && !value) {
error_setg(errp, "'prealloc=on' and 'reserve=off' are incompatible");
return;
}
backend->reserve = value;
}
#endif /* CONFIG_LINUX */
static bool
host_memory_backend_get_use_canonical_path(Object *obj, Error **errp)
{
HostMemoryBackend *backend = MEMORY_BACKEND(obj);
return backend->use_canonical_path;
}
static void
host_memory_backend_set_use_canonical_path(Object *obj, bool value,
Error **errp)
{
HostMemoryBackend *backend = MEMORY_BACKEND(obj);
backend->use_canonical_path = value;
}
static void
host_memory_backend_class_init(ObjectClass *oc, void *data)
{
UserCreatableClass *ucc = USER_CREATABLE_CLASS(oc);
ucc->complete = host_memory_backend_memory_complete;
ucc->can_be_deleted = host_memory_backend_can_be_deleted;
object_class_property_add_bool(oc, "merge",
host_memory_backend_get_merge,
qom: Drop parameter @errp of object_property_add() & friends The only way object_property_add() can fail is when a property with the same name already exists. Since our property names are all hardcoded, failure is a programming error, and the appropriate way to handle it is passing &error_abort. Same for its variants, except for object_property_add_child(), which additionally fails when the child already has a parent. Parentage is also under program control, so this is a programming error, too. We have a bit over 500 callers. Almost half of them pass &error_abort, slightly fewer ignore errors, one test case handles errors, and the remaining few callers pass them to their own callers. The previous few commits demonstrated once again that ignoring programming errors is a bad idea. Of the few ones that pass on errors, several violate the Error API. The Error ** argument must be NULL, &error_abort, &error_fatal, or a pointer to a variable containing NULL. Passing an argument of the latter kind twice without clearing it in between is wrong: if the first call sets an error, it no longer points to NULL for the second call. ich9_pm_add_properties(), sparc32_ledma_realize(), sparc32_dma_realize(), xilinx_axidma_realize(), xilinx_enet_realize() are wrong that way. When the one appropriate choice of argument is &error_abort, letting users pick the argument is a bad idea. Drop parameter @errp and assert the preconditions instead. There's one exception to "duplicate property name is a programming error": the way object_property_add() implements the magic (and undocumented) "automatic arrayification". Don't drop @errp there. Instead, rename object_property_add() to object_property_try_add(), and add the obvious wrapper object_property_add(). Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20200505152926.18877-15-armbru@redhat.com> [Two semantic rebase conflicts resolved]
2020-05-05 17:29:22 +02:00
host_memory_backend_set_merge);
object_class_property_set_description(oc, "merge",
"Mark memory as mergeable");
object_class_property_add_bool(oc, "dump",
host_memory_backend_get_dump,
qom: Drop parameter @errp of object_property_add() & friends The only way object_property_add() can fail is when a property with the same name already exists. Since our property names are all hardcoded, failure is a programming error, and the appropriate way to handle it is passing &error_abort. Same for its variants, except for object_property_add_child(), which additionally fails when the child already has a parent. Parentage is also under program control, so this is a programming error, too. We have a bit over 500 callers. Almost half of them pass &error_abort, slightly fewer ignore errors, one test case handles errors, and the remaining few callers pass them to their own callers. The previous few commits demonstrated once again that ignoring programming errors is a bad idea. Of the few ones that pass on errors, several violate the Error API. The Error ** argument must be NULL, &error_abort, &error_fatal, or a pointer to a variable containing NULL. Passing an argument of the latter kind twice without clearing it in between is wrong: if the first call sets an error, it no longer points to NULL for the second call. ich9_pm_add_properties(), sparc32_ledma_realize(), sparc32_dma_realize(), xilinx_axidma_realize(), xilinx_enet_realize() are wrong that way. When the one appropriate choice of argument is &error_abort, letting users pick the argument is a bad idea. Drop parameter @errp and assert the preconditions instead. There's one exception to "duplicate property name is a programming error": the way object_property_add() implements the magic (and undocumented) "automatic arrayification". Don't drop @errp there. Instead, rename object_property_add() to object_property_try_add(), and add the obvious wrapper object_property_add(). Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20200505152926.18877-15-armbru@redhat.com> [Two semantic rebase conflicts resolved]
2020-05-05 17:29:22 +02:00
host_memory_backend_set_dump);
object_class_property_set_description(oc, "dump",
"Set to 'off' to exclude from core dump");
object_class_property_add_bool(oc, "prealloc",
host_memory_backend_get_prealloc,
qom: Drop parameter @errp of object_property_add() & friends The only way object_property_add() can fail is when a property with the same name already exists. Since our property names are all hardcoded, failure is a programming error, and the appropriate way to handle it is passing &error_abort. Same for its variants, except for object_property_add_child(), which additionally fails when the child already has a parent. Parentage is also under program control, so this is a programming error, too. We have a bit over 500 callers. Almost half of them pass &error_abort, slightly fewer ignore errors, one test case handles errors, and the remaining few callers pass them to their own callers. The previous few commits demonstrated once again that ignoring programming errors is a bad idea. Of the few ones that pass on errors, several violate the Error API. The Error ** argument must be NULL, &error_abort, &error_fatal, or a pointer to a variable containing NULL. Passing an argument of the latter kind twice without clearing it in between is wrong: if the first call sets an error, it no longer points to NULL for the second call. ich9_pm_add_properties(), sparc32_ledma_realize(), sparc32_dma_realize(), xilinx_axidma_realize(), xilinx_enet_realize() are wrong that way. When the one appropriate choice of argument is &error_abort, letting users pick the argument is a bad idea. Drop parameter @errp and assert the preconditions instead. There's one exception to "duplicate property name is a programming error": the way object_property_add() implements the magic (and undocumented) "automatic arrayification". Don't drop @errp there. Instead, rename object_property_add() to object_property_try_add(), and add the obvious wrapper object_property_add(). Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20200505152926.18877-15-armbru@redhat.com> [Two semantic rebase conflicts resolved]
2020-05-05 17:29:22 +02:00
host_memory_backend_set_prealloc);
object_class_property_set_description(oc, "prealloc",
"Preallocate memory");
object_class_property_add(oc, "prealloc-threads", "int",
host_memory_backend_get_prealloc_threads,
host_memory_backend_set_prealloc_threads,
qom: Drop parameter @errp of object_property_add() & friends The only way object_property_add() can fail is when a property with the same name already exists. Since our property names are all hardcoded, failure is a programming error, and the appropriate way to handle it is passing &error_abort. Same for its variants, except for object_property_add_child(), which additionally fails when the child already has a parent. Parentage is also under program control, so this is a programming error, too. We have a bit over 500 callers. Almost half of them pass &error_abort, slightly fewer ignore errors, one test case handles errors, and the remaining few callers pass them to their own callers. The previous few commits demonstrated once again that ignoring programming errors is a bad idea. Of the few ones that pass on errors, several violate the Error API. The Error ** argument must be NULL, &error_abort, &error_fatal, or a pointer to a variable containing NULL. Passing an argument of the latter kind twice without clearing it in between is wrong: if the first call sets an error, it no longer points to NULL for the second call. ich9_pm_add_properties(), sparc32_ledma_realize(), sparc32_dma_realize(), xilinx_axidma_realize(), xilinx_enet_realize() are wrong that way. When the one appropriate choice of argument is &error_abort, letting users pick the argument is a bad idea. Drop parameter @errp and assert the preconditions instead. There's one exception to "duplicate property name is a programming error": the way object_property_add() implements the magic (and undocumented) "automatic arrayification". Don't drop @errp there. Instead, rename object_property_add() to object_property_try_add(), and add the obvious wrapper object_property_add(). Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20200505152926.18877-15-armbru@redhat.com> [Two semantic rebase conflicts resolved]
2020-05-05 17:29:22 +02:00
NULL, NULL);
object_class_property_set_description(oc, "prealloc-threads",
"Number of CPU threads to use for prealloc");
object_class_property_add_link(oc, "prealloc-context",
TYPE_THREAD_CONTEXT, offsetof(HostMemoryBackend, prealloc_context),
object_property_allow_set_link, OBJ_PROP_LINK_STRONG);
object_class_property_set_description(oc, "prealloc-context",
"Context to use for creating CPU threads for preallocation");
object_class_property_add(oc, "size", "int",
host_memory_backend_get_size,
host_memory_backend_set_size,
qom: Drop parameter @errp of object_property_add() & friends The only way object_property_add() can fail is when a property with the same name already exists. Since our property names are all hardcoded, failure is a programming error, and the appropriate way to handle it is passing &error_abort. Same for its variants, except for object_property_add_child(), which additionally fails when the child already has a parent. Parentage is also under program control, so this is a programming error, too. We have a bit over 500 callers. Almost half of them pass &error_abort, slightly fewer ignore errors, one test case handles errors, and the remaining few callers pass them to their own callers. The previous few commits demonstrated once again that ignoring programming errors is a bad idea. Of the few ones that pass on errors, several violate the Error API. The Error ** argument must be NULL, &error_abort, &error_fatal, or a pointer to a variable containing NULL. Passing an argument of the latter kind twice without clearing it in between is wrong: if the first call sets an error, it no longer points to NULL for the second call. ich9_pm_add_properties(), sparc32_ledma_realize(), sparc32_dma_realize(), xilinx_axidma_realize(), xilinx_enet_realize() are wrong that way. When the one appropriate choice of argument is &error_abort, letting users pick the argument is a bad idea. Drop parameter @errp and assert the preconditions instead. There's one exception to "duplicate property name is a programming error": the way object_property_add() implements the magic (and undocumented) "automatic arrayification". Don't drop @errp there. Instead, rename object_property_add() to object_property_try_add(), and add the obvious wrapper object_property_add(). Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20200505152926.18877-15-armbru@redhat.com> [Two semantic rebase conflicts resolved]
2020-05-05 17:29:22 +02:00
NULL, NULL);
object_class_property_set_description(oc, "size",
"Size of the memory region (ex: 500M)");
object_class_property_add(oc, "host-nodes", "int",
host_memory_backend_get_host_nodes,
host_memory_backend_set_host_nodes,
qom: Drop parameter @errp of object_property_add() & friends The only way object_property_add() can fail is when a property with the same name already exists. Since our property names are all hardcoded, failure is a programming error, and the appropriate way to handle it is passing &error_abort. Same for its variants, except for object_property_add_child(), which additionally fails when the child already has a parent. Parentage is also under program control, so this is a programming error, too. We have a bit over 500 callers. Almost half of them pass &error_abort, slightly fewer ignore errors, one test case handles errors, and the remaining few callers pass them to their own callers. The previous few commits demonstrated once again that ignoring programming errors is a bad idea. Of the few ones that pass on errors, several violate the Error API. The Error ** argument must be NULL, &error_abort, &error_fatal, or a pointer to a variable containing NULL. Passing an argument of the latter kind twice without clearing it in between is wrong: if the first call sets an error, it no longer points to NULL for the second call. ich9_pm_add_properties(), sparc32_ledma_realize(), sparc32_dma_realize(), xilinx_axidma_realize(), xilinx_enet_realize() are wrong that way. When the one appropriate choice of argument is &error_abort, letting users pick the argument is a bad idea. Drop parameter @errp and assert the preconditions instead. There's one exception to "duplicate property name is a programming error": the way object_property_add() implements the magic (and undocumented) "automatic arrayification". Don't drop @errp there. Instead, rename object_property_add() to object_property_try_add(), and add the obvious wrapper object_property_add(). Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20200505152926.18877-15-armbru@redhat.com> [Two semantic rebase conflicts resolved]
2020-05-05 17:29:22 +02:00
NULL, NULL);
object_class_property_set_description(oc, "host-nodes",
"Binds memory to the list of NUMA host nodes");
object_class_property_add_enum(oc, "policy", "HostMemPolicy",
&HostMemPolicy_lookup,
host_memory_backend_get_policy,
qom: Drop parameter @errp of object_property_add() & friends The only way object_property_add() can fail is when a property with the same name already exists. Since our property names are all hardcoded, failure is a programming error, and the appropriate way to handle it is passing &error_abort. Same for its variants, except for object_property_add_child(), which additionally fails when the child already has a parent. Parentage is also under program control, so this is a programming error, too. We have a bit over 500 callers. Almost half of them pass &error_abort, slightly fewer ignore errors, one test case handles errors, and the remaining few callers pass them to their own callers. The previous few commits demonstrated once again that ignoring programming errors is a bad idea. Of the few ones that pass on errors, several violate the Error API. The Error ** argument must be NULL, &error_abort, &error_fatal, or a pointer to a variable containing NULL. Passing an argument of the latter kind twice without clearing it in between is wrong: if the first call sets an error, it no longer points to NULL for the second call. ich9_pm_add_properties(), sparc32_ledma_realize(), sparc32_dma_realize(), xilinx_axidma_realize(), xilinx_enet_realize() are wrong that way. When the one appropriate choice of argument is &error_abort, letting users pick the argument is a bad idea. Drop parameter @errp and assert the preconditions instead. There's one exception to "duplicate property name is a programming error": the way object_property_add() implements the magic (and undocumented) "automatic arrayification". Don't drop @errp there. Instead, rename object_property_add() to object_property_try_add(), and add the obvious wrapper object_property_add(). Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20200505152926.18877-15-armbru@redhat.com> [Two semantic rebase conflicts resolved]
2020-05-05 17:29:22 +02:00
host_memory_backend_set_policy);
object_class_property_set_description(oc, "policy",
"Set the NUMA policy");
object_class_property_add_bool(oc, "share",
qom: Drop parameter @errp of object_property_add() & friends The only way object_property_add() can fail is when a property with the same name already exists. Since our property names are all hardcoded, failure is a programming error, and the appropriate way to handle it is passing &error_abort. Same for its variants, except for object_property_add_child(), which additionally fails when the child already has a parent. Parentage is also under program control, so this is a programming error, too. We have a bit over 500 callers. Almost half of them pass &error_abort, slightly fewer ignore errors, one test case handles errors, and the remaining few callers pass them to their own callers. The previous few commits demonstrated once again that ignoring programming errors is a bad idea. Of the few ones that pass on errors, several violate the Error API. The Error ** argument must be NULL, &error_abort, &error_fatal, or a pointer to a variable containing NULL. Passing an argument of the latter kind twice without clearing it in between is wrong: if the first call sets an error, it no longer points to NULL for the second call. ich9_pm_add_properties(), sparc32_ledma_realize(), sparc32_dma_realize(), xilinx_axidma_realize(), xilinx_enet_realize() are wrong that way. When the one appropriate choice of argument is &error_abort, letting users pick the argument is a bad idea. Drop parameter @errp and assert the preconditions instead. There's one exception to "duplicate property name is a programming error": the way object_property_add() implements the magic (and undocumented) "automatic arrayification". Don't drop @errp there. Instead, rename object_property_add() to object_property_try_add(), and add the obvious wrapper object_property_add(). Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20200505152926.18877-15-armbru@redhat.com> [Two semantic rebase conflicts resolved]
2020-05-05 17:29:22 +02:00
host_memory_backend_get_share, host_memory_backend_set_share);
object_class_property_set_description(oc, "share",
"Mark the memory as private to QEMU or shared");
#ifdef CONFIG_LINUX
object_class_property_add_bool(oc, "reserve",
host_memory_backend_get_reserve, host_memory_backend_set_reserve);
object_class_property_set_description(oc, "reserve",
"Reserve swap space (or huge pages) if applicable");
#endif /* CONFIG_LINUX */
/*
* Do not delete/rename option. This option must be considered stable
* (as if it didn't have the 'x-' prefix including deprecation period) as
* long as 4.0 and older machine types exists.
* Option will be used by upper layers to override (disable) canonical path
* for ramblock-id set by compat properties on old machine types ( <= 4.0),
* to keep migration working when backend is used for main RAM with
* -machine memory-backend= option (main RAM historically used prefix-less
* ramblock-id).
*/
object_class_property_add_bool(oc, "x-use-canonical-path-for-ramblock-id",
host_memory_backend_get_use_canonical_path,
qom: Drop parameter @errp of object_property_add() & friends The only way object_property_add() can fail is when a property with the same name already exists. Since our property names are all hardcoded, failure is a programming error, and the appropriate way to handle it is passing &error_abort. Same for its variants, except for object_property_add_child(), which additionally fails when the child already has a parent. Parentage is also under program control, so this is a programming error, too. We have a bit over 500 callers. Almost half of them pass &error_abort, slightly fewer ignore errors, one test case handles errors, and the remaining few callers pass them to their own callers. The previous few commits demonstrated once again that ignoring programming errors is a bad idea. Of the few ones that pass on errors, several violate the Error API. The Error ** argument must be NULL, &error_abort, &error_fatal, or a pointer to a variable containing NULL. Passing an argument of the latter kind twice without clearing it in between is wrong: if the first call sets an error, it no longer points to NULL for the second call. ich9_pm_add_properties(), sparc32_ledma_realize(), sparc32_dma_realize(), xilinx_axidma_realize(), xilinx_enet_realize() are wrong that way. When the one appropriate choice of argument is &error_abort, letting users pick the argument is a bad idea. Drop parameter @errp and assert the preconditions instead. There's one exception to "duplicate property name is a programming error": the way object_property_add() implements the magic (and undocumented) "automatic arrayification". Don't drop @errp there. Instead, rename object_property_add() to object_property_try_add(), and add the obvious wrapper object_property_add(). Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20200505152926.18877-15-armbru@redhat.com> [Two semantic rebase conflicts resolved]
2020-05-05 17:29:22 +02:00
host_memory_backend_set_use_canonical_path);
}
static const TypeInfo host_memory_backend_info = {
.name = TYPE_MEMORY_BACKEND,
.parent = TYPE_OBJECT,
.abstract = true,
.class_size = sizeof(HostMemoryBackendClass),
.class_init = host_memory_backend_class_init,
.instance_size = sizeof(HostMemoryBackend),
.instance_init = host_memory_backend_init,
.instance_post_init = host_memory_backend_post_init,
.interfaces = (InterfaceInfo[]) {
{ TYPE_USER_CREATABLE },
{ }
}
};
static void register_types(void)
{
type_register_static(&host_memory_backend_info);
}
type_init(register_types);