qemu-e2k/hw/i386/microvm.c

780 lines
26 KiB
C
Raw Normal View History

/*
* Copyright (c) 2018 Intel Corporation
* Copyright (c) 2019 Red Hat, Inc.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms and conditions of the GNU General Public License,
* version 2 or later, as published by the Free Software Foundation.
*
* This program is distributed in the hope it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
* more details.
*
* You should have received a copy of the GNU General Public License along with
* this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include "qemu/osdep.h"
#include "qemu/error-report.h"
#include "qemu/cutils.h"
#include "qemu/units.h"
#include "qapi/error.h"
#include "qapi/visitor.h"
#include "qapi/qapi-visit-common.h"
#include "sysemu/sysemu.h"
#include "sysemu/cpus.h"
#include "sysemu/numa.h"
#include "sysemu/reset.h"
#include "sysemu/runstate.h"
#include "acpi-microvm.h"
#include "microvm-dt.h"
#include "hw/loader.h"
#include "hw/irq.h"
#include "hw/kvm/clock.h"
#include "hw/i386/microvm.h"
#include "hw/i386/x86.h"
#include "target/i386/cpu.h"
#include "hw/intc/i8259.h"
#include "hw/timer/i8254.h"
#include "hw/rtc/mc146818rtc.h"
#include "hw/char/serial.h"
#include "hw/display/ramfb.h"
#include "hw/i386/topology.h"
#include "hw/i386/e820_memory_layout.h"
#include "hw/i386/fw_cfg.h"
#include "hw/virtio/virtio-mmio.h"
#include "hw/acpi/acpi.h"
#include "hw/acpi/generic_event_device.h"
#include "hw/pci-host/gpex.h"
#include "hw/usb/xhci.h"
#include "elf.h"
#include "kvm/kvm_i386.h"
#include "hw/xen/start_info.h"
#define MICROVM_QBOOT_FILENAME "qboot.rom"
#define MICROVM_BIOS_FILENAME "bios-microvm.bin"
static void microvm_set_rtc(MicrovmMachineState *mms, ISADevice *s)
{
X86MachineState *x86ms = X86_MACHINE(mms);
int val;
val = MIN(x86ms->below_4g_mem_size / KiB, 640);
rtc_set_memory(s, 0x15, val);
rtc_set_memory(s, 0x16, val >> 8);
/* extended memory (next 64MiB) */
if (x86ms->below_4g_mem_size > 1 * MiB) {
val = (x86ms->below_4g_mem_size - 1 * MiB) / KiB;
} else {
val = 0;
}
if (val > 65535) {
val = 65535;
}
rtc_set_memory(s, 0x17, val);
rtc_set_memory(s, 0x18, val >> 8);
rtc_set_memory(s, 0x30, val);
rtc_set_memory(s, 0x31, val >> 8);
/* memory between 16MiB and 4GiB */
if (x86ms->below_4g_mem_size > 16 * MiB) {
val = (x86ms->below_4g_mem_size - 16 * MiB) / (64 * KiB);
} else {
val = 0;
}
if (val > 65535) {
val = 65535;
}
rtc_set_memory(s, 0x34, val);
rtc_set_memory(s, 0x35, val >> 8);
/* memory above 4GiB */
val = x86ms->above_4g_mem_size / 65536;
rtc_set_memory(s, 0x5b, val);
rtc_set_memory(s, 0x5c, val >> 8);
rtc_set_memory(s, 0x5d, val >> 16);
}
static void create_gpex(MicrovmMachineState *mms)
{
X86MachineState *x86ms = X86_MACHINE(mms);
MemoryRegion *mmio32_alias;
MemoryRegion *mmio64_alias;
MemoryRegion *mmio_reg;
MemoryRegion *ecam_alias;
MemoryRegion *ecam_reg;
DeviceState *dev;
int i;
dev = qdev_new(TYPE_GPEX_HOST);
sysbus_realize_and_unref(SYS_BUS_DEVICE(dev), &error_fatal);
/* Map only the first size_ecam bytes of ECAM space */
ecam_alias = g_new0(MemoryRegion, 1);
ecam_reg = sysbus_mmio_get_region(SYS_BUS_DEVICE(dev), 0);
memory_region_init_alias(ecam_alias, OBJECT(dev), "pcie-ecam",
ecam_reg, 0, mms->gpex.ecam.size);
memory_region_add_subregion(get_system_memory(),
mms->gpex.ecam.base, ecam_alias);
/* Map the MMIO window into system address space so as to expose
* the section of PCI MMIO space which starts at the same base address
* (ie 1:1 mapping for that part of PCI MMIO space visible through
* the window).
*/
mmio_reg = sysbus_mmio_get_region(SYS_BUS_DEVICE(dev), 1);
if (mms->gpex.mmio32.size) {
mmio32_alias = g_new0(MemoryRegion, 1);
memory_region_init_alias(mmio32_alias, OBJECT(dev), "pcie-mmio32", mmio_reg,
mms->gpex.mmio32.base, mms->gpex.mmio32.size);
memory_region_add_subregion(get_system_memory(),
mms->gpex.mmio32.base, mmio32_alias);
}
if (mms->gpex.mmio64.size) {
mmio64_alias = g_new0(MemoryRegion, 1);
memory_region_init_alias(mmio64_alias, OBJECT(dev), "pcie-mmio64", mmio_reg,
mms->gpex.mmio64.base, mms->gpex.mmio64.size);
memory_region_add_subregion(get_system_memory(),
mms->gpex.mmio64.base, mmio64_alias);
}
for (i = 0; i < GPEX_NUM_IRQS; i++) {
sysbus_connect_irq(SYS_BUS_DEVICE(dev), i,
x86ms->gsi[mms->gpex.irq + i]);
}
}
static int microvm_ioapics(MicrovmMachineState *mms)
{
if (!x86_machine_is_acpi_enabled(X86_MACHINE(mms))) {
return 1;
}
if (mms->ioapic2 == ON_OFF_AUTO_OFF) {
return 1;
}
return 2;
}
static void microvm_devices_init(MicrovmMachineState *mms)
{
const char *default_firmware;
X86MachineState *x86ms = X86_MACHINE(mms);
ISABus *isa_bus;
ISADevice *rtc_state;
GSIState *gsi_state;
int ioapics;
int i;
/* Core components */
ioapics = microvm_ioapics(mms);
gsi_state = g_malloc0(sizeof(*gsi_state));
x86ms->gsi = qemu_allocate_irqs(gsi_handler, gsi_state,
IOAPIC_NUM_PINS * ioapics);
isa_bus = isa_bus_new(NULL, get_system_memory(), get_system_io(),
&error_abort);
isa_bus_irqs(isa_bus, x86ms->gsi);
ioapic_init_gsi(gsi_state, "machine");
if (ioapics > 1) {
x86ms->ioapic2 = ioapic_init_secondary(gsi_state);
}
kvmclock_create(true);
mms->virtio_irq_base = 5;
mms->virtio_num_transports = 8;
if (x86ms->ioapic2) {
mms->pcie_irq_base = 16; /* 16 -> 19 */
/* use second ioapic (24 -> 47) for virtio-mmio irq lines */
mms->virtio_irq_base = IO_APIC_SECONDARY_IRQBASE;
mms->virtio_num_transports = IOAPIC_NUM_PINS;
} else if (x86_machine_is_acpi_enabled(x86ms)) {
mms->pcie_irq_base = 12; /* 12 -> 15 */
mms->virtio_irq_base = 16; /* 16 -> 23 */
}
for (i = 0; i < mms->virtio_num_transports; i++) {
sysbus_create_simple("virtio-mmio",
VIRTIO_MMIO_BASE + i * 512,
x86ms->gsi[mms->virtio_irq_base + i]);
}
/* Optional and legacy devices */
if (x86_machine_is_acpi_enabled(x86ms)) {
DeviceState *dev = qdev_new(TYPE_ACPI_GED_X86);
qdev_prop_set_uint32(dev, "ged-event", ACPI_GED_PWR_DOWN_EVT);
sysbus_mmio_map(SYS_BUS_DEVICE(dev), 0, GED_MMIO_BASE);
/* sysbus_mmio_map(SYS_BUS_DEVICE(dev), 1, GED_MMIO_BASE_MEMHP); */
sysbus_mmio_map(SYS_BUS_DEVICE(dev), 2, GED_MMIO_BASE_REGS);
sysbus_connect_irq(SYS_BUS_DEVICE(dev), 0,
x86ms->gsi[GED_MMIO_IRQ]);
sysbus_realize(SYS_BUS_DEVICE(dev), &error_fatal);
x86ms->acpi_dev = HOTPLUG_HANDLER(dev);
}
if (x86_machine_is_acpi_enabled(x86ms) && machine_usb(MACHINE(mms))) {
DeviceState *dev = qdev_new(TYPE_XHCI_SYSBUS);
qdev_prop_set_uint32(dev, "intrs", 1);
qdev_prop_set_uint32(dev, "slots", XHCI_MAXSLOTS);
qdev_prop_set_uint32(dev, "p2", 8);
qdev_prop_set_uint32(dev, "p3", 8);
sysbus_realize(SYS_BUS_DEVICE(dev), &error_fatal);
sysbus_mmio_map(SYS_BUS_DEVICE(dev), 0, MICROVM_XHCI_BASE);
sysbus_connect_irq(SYS_BUS_DEVICE(dev), 0,
x86ms->gsi[MICROVM_XHCI_IRQ]);
}
if (x86_machine_is_acpi_enabled(x86ms) && mms->pcie == ON_OFF_AUTO_ON) {
/* use topmost 25% of the address space available */
hwaddr phys_size = (hwaddr)1 << X86_CPU(first_cpu)->phys_bits;
if (phys_size > 0x1000000ll) {
mms->gpex.mmio64.size = phys_size / 4;
mms->gpex.mmio64.base = phys_size - mms->gpex.mmio64.size;
}
mms->gpex.mmio32.base = PCIE_MMIO_BASE;
mms->gpex.mmio32.size = PCIE_MMIO_SIZE;
mms->gpex.ecam.base = PCIE_ECAM_BASE;
mms->gpex.ecam.size = PCIE_ECAM_SIZE;
mms->gpex.irq = mms->pcie_irq_base;
create_gpex(mms);
x86ms->pci_irq_mask = ((1 << (mms->pcie_irq_base + 0)) |
(1 << (mms->pcie_irq_base + 1)) |
(1 << (mms->pcie_irq_base + 2)) |
(1 << (mms->pcie_irq_base + 3)));
} else {
x86ms->pci_irq_mask = 0;
}
if (mms->pic == ON_OFF_AUTO_ON || mms->pic == ON_OFF_AUTO_AUTO) {
qemu_irq *i8259;
i8259 = i8259_init(isa_bus, x86_allocate_cpu_irq());
for (i = 0; i < ISA_NUM_IRQS; i++) {
gsi_state->i8259_irq[i] = i8259[i];
}
g_free(i8259);
}
if (mms->pit == ON_OFF_AUTO_ON || mms->pit == ON_OFF_AUTO_AUTO) {
if (kvm_pit_in_kernel()) {
kvm_pit_init(isa_bus, 0x40);
} else {
i8254_pit_init(isa_bus, 0x40, 0, NULL);
}
}
if (mms->rtc == ON_OFF_AUTO_ON ||
(mms->rtc == ON_OFF_AUTO_AUTO && !kvm_enabled())) {
rtc_state = mc146818_rtc_init(isa_bus, 2000, NULL);
microvm_set_rtc(mms, rtc_state);
}
if (mms->isa_serial) {
serial_hds_isa_init(isa_bus, 0, 1);
}
default_firmware = x86_machine_is_acpi_enabled(x86ms)
? MICROVM_BIOS_FILENAME
: MICROVM_QBOOT_FILENAME;
x86_bios_rom_init(MACHINE(mms), default_firmware, get_system_memory(), true);
}
static void microvm_memory_init(MicrovmMachineState *mms)
{
MachineState *machine = MACHINE(mms);
X86MachineState *x86ms = X86_MACHINE(mms);
MemoryRegion *ram_below_4g, *ram_above_4g;
MemoryRegion *system_memory = get_system_memory();
FWCfgState *fw_cfg;
ram_addr_t lowmem = 0xc0000000; /* 3G */
int i;
if (machine->ram_size > lowmem) {
x86ms->above_4g_mem_size = machine->ram_size - lowmem;
x86ms->below_4g_mem_size = lowmem;
} else {
x86ms->above_4g_mem_size = 0;
x86ms->below_4g_mem_size = machine->ram_size;
}
ram_below_4g = g_malloc(sizeof(*ram_below_4g));
memory_region_init_alias(ram_below_4g, NULL, "ram-below-4g", machine->ram,
0, x86ms->below_4g_mem_size);
memory_region_add_subregion(system_memory, 0, ram_below_4g);
e820_add_entry(0, x86ms->below_4g_mem_size, E820_RAM);
if (x86ms->above_4g_mem_size > 0) {
ram_above_4g = g_malloc(sizeof(*ram_above_4g));
memory_region_init_alias(ram_above_4g, NULL, "ram-above-4g",
machine->ram,
x86ms->below_4g_mem_size,
x86ms->above_4g_mem_size);
memory_region_add_subregion(system_memory, 0x100000000ULL,
ram_above_4g);
e820_add_entry(0x100000000ULL, x86ms->above_4g_mem_size, E820_RAM);
}
fw_cfg = fw_cfg_init_io_dma(FW_CFG_IO_BASE, FW_CFG_IO_BASE + 4,
&address_space_memory);
fw_cfg_add_i16(fw_cfg, FW_CFG_NB_CPUS, machine->smp.cpus);
fw_cfg_add_i16(fw_cfg, FW_CFG_MAX_CPUS, machine->smp.max_cpus);
fw_cfg_add_i64(fw_cfg, FW_CFG_RAM_SIZE, (uint64_t)machine->ram_size);
fw_cfg_add_i32(fw_cfg, FW_CFG_IRQ0_OVERRIDE, 1);
fw_cfg_add_bytes(fw_cfg, FW_CFG_E820_TABLE,
&e820_reserve, sizeof(e820_reserve));
fw_cfg_add_file(fw_cfg, "etc/e820", e820_table,
sizeof(struct e820_entry) * e820_get_num_entries());
rom_set_fw(fw_cfg);
if (machine->kernel_filename != NULL) {
x86_load_linux(x86ms, fw_cfg, 0, true);
}
if (mms->option_roms) {
for (i = 0; i < nb_option_roms; i++) {
rom_add_option(option_rom[i].name, option_rom[i].bootindex);
}
}
x86ms->fw_cfg = fw_cfg;
x86ms->ioapic_as = &address_space_memory;
}
static gchar *microvm_get_mmio_cmdline(gchar *name, uint32_t virtio_irq_base)
{
gchar *cmdline;
gchar *separator;
long int index;
int ret;
separator = g_strrstr(name, ".");
if (!separator) {
return NULL;
}
if (qemu_strtol(separator + 1, NULL, 10, &index) != 0) {
return NULL;
}
cmdline = g_malloc0(VIRTIO_CMDLINE_MAXLEN);
ret = g_snprintf(cmdline, VIRTIO_CMDLINE_MAXLEN,
" virtio_mmio.device=512@0x%lx:%ld",
VIRTIO_MMIO_BASE + index * 512,
virtio_irq_base + index);
if (ret < 0 || ret >= VIRTIO_CMDLINE_MAXLEN) {
g_free(cmdline);
return NULL;
}
return cmdline;
}
static void microvm_fix_kernel_cmdline(MachineState *machine)
{
X86MachineState *x86ms = X86_MACHINE(machine);
MicrovmMachineState *mms = MICROVM_MACHINE(machine);
BusState *bus;
BusChild *kid;
char *cmdline;
/*
* Find MMIO transports with attached devices, and add them to the kernel
* command line.
*
* Yes, this is a hack, but one that heavily improves the UX without
* introducing any significant issues.
*/
cmdline = g_strdup(machine->kernel_cmdline);
bus = sysbus_get_default();
QTAILQ_FOREACH(kid, &bus->children, sibling) {
DeviceState *dev = kid->child;
ObjectClass *class = object_get_class(OBJECT(dev));
if (class == object_class_by_name(TYPE_VIRTIO_MMIO)) {
VirtIOMMIOProxy *mmio = VIRTIO_MMIO(OBJECT(dev));
VirtioBusState *mmio_virtio_bus = &mmio->bus;
BusState *mmio_bus = &mmio_virtio_bus->parent_obj;
if (!QTAILQ_EMPTY(&mmio_bus->children)) {
gchar *mmio_cmdline = microvm_get_mmio_cmdline
(mmio_bus->name, mms->virtio_irq_base);
if (mmio_cmdline) {
char *newcmd = g_strjoin(NULL, cmdline, mmio_cmdline, NULL);
g_free(mmio_cmdline);
g_free(cmdline);
cmdline = newcmd;
}
}
}
}
fw_cfg_modify_i32(x86ms->fw_cfg, FW_CFG_CMDLINE_SIZE, strlen(cmdline) + 1);
fw_cfg_modify_string(x86ms->fw_cfg, FW_CFG_CMDLINE_DATA, cmdline);
g_free(cmdline);
}
static void microvm_device_pre_plug_cb(HotplugHandler *hotplug_dev,
DeviceState *dev, Error **errp)
{
X86CPU *cpu = X86_CPU(dev);
cpu->host_phys_bits = true; /* need reliable phys-bits */
x86_cpu_pre_plug(hotplug_dev, dev, errp);
}
static void microvm_device_plug_cb(HotplugHandler *hotplug_dev,
DeviceState *dev, Error **errp)
{
x86_cpu_plug(hotplug_dev, dev, errp);
}
static void microvm_device_unplug_request_cb(HotplugHandler *hotplug_dev,
DeviceState *dev, Error **errp)
{
error_setg(errp, "unplug not supported by microvm");
}
static void microvm_device_unplug_cb(HotplugHandler *hotplug_dev,
DeviceState *dev, Error **errp)
{
error_setg(errp, "unplug not supported by microvm");
}
static HotplugHandler *microvm_get_hotplug_handler(MachineState *machine,
DeviceState *dev)
{
if (object_dynamic_cast(OBJECT(dev), TYPE_CPU)) {
return HOTPLUG_HANDLER(machine);
}
return NULL;
}
static void microvm_machine_state_init(MachineState *machine)
{
MicrovmMachineState *mms = MICROVM_MACHINE(machine);
X86MachineState *x86ms = X86_MACHINE(machine);
microvm_memory_init(mms);
x86_cpus_init(x86ms, CPU_VERSION_LATEST);
microvm_devices_init(mms);
}
static void microvm_machine_reset(MachineState *machine)
{
MicrovmMachineState *mms = MICROVM_MACHINE(machine);
CPUState *cs;
X86CPU *cpu;
if (!x86_machine_is_acpi_enabled(X86_MACHINE(machine)) &&
machine->kernel_filename != NULL &&
mms->auto_kernel_cmdline && !mms->kernel_cmdline_fixed) {
microvm_fix_kernel_cmdline(machine);
mms->kernel_cmdline_fixed = true;
}
qemu_devices_reset();
CPU_FOREACH(cs) {
cpu = X86_CPU(cs);
if (cpu->apic_state) {
device_legacy_reset(cpu->apic_state);
}
}
}
static void microvm_machine_get_pic(Object *obj, Visitor *v, const char *name,
void *opaque, Error **errp)
{
MicrovmMachineState *mms = MICROVM_MACHINE(obj);
OnOffAuto pic = mms->pic;
visit_type_OnOffAuto(v, name, &pic, errp);
}
static void microvm_machine_set_pic(Object *obj, Visitor *v, const char *name,
void *opaque, Error **errp)
{
MicrovmMachineState *mms = MICROVM_MACHINE(obj);
visit_type_OnOffAuto(v, name, &mms->pic, errp);
}
static void microvm_machine_get_pit(Object *obj, Visitor *v, const char *name,
void *opaque, Error **errp)
{
MicrovmMachineState *mms = MICROVM_MACHINE(obj);
OnOffAuto pit = mms->pit;
visit_type_OnOffAuto(v, name, &pit, errp);
}
static void microvm_machine_set_pit(Object *obj, Visitor *v, const char *name,
void *opaque, Error **errp)
{
MicrovmMachineState *mms = MICROVM_MACHINE(obj);
visit_type_OnOffAuto(v, name, &mms->pit, errp);
}
static void microvm_machine_get_rtc(Object *obj, Visitor *v, const char *name,
void *opaque, Error **errp)
{
MicrovmMachineState *mms = MICROVM_MACHINE(obj);
OnOffAuto rtc = mms->rtc;
visit_type_OnOffAuto(v, name, &rtc, errp);
}
static void microvm_machine_set_rtc(Object *obj, Visitor *v, const char *name,
void *opaque, Error **errp)
{
MicrovmMachineState *mms = MICROVM_MACHINE(obj);
visit_type_OnOffAuto(v, name, &mms->rtc, errp);
}
static void microvm_machine_get_pcie(Object *obj, Visitor *v, const char *name,
void *opaque, Error **errp)
{
MicrovmMachineState *mms = MICROVM_MACHINE(obj);
OnOffAuto pcie = mms->pcie;
visit_type_OnOffAuto(v, name, &pcie, errp);
}
static void microvm_machine_set_pcie(Object *obj, Visitor *v, const char *name,
void *opaque, Error **errp)
{
MicrovmMachineState *mms = MICROVM_MACHINE(obj);
visit_type_OnOffAuto(v, name, &mms->pcie, errp);
}
static void microvm_machine_get_ioapic2(Object *obj, Visitor *v, const char *name,
void *opaque, Error **errp)
{
MicrovmMachineState *mms = MICROVM_MACHINE(obj);
OnOffAuto ioapic2 = mms->ioapic2;
visit_type_OnOffAuto(v, name, &ioapic2, errp);
}
static void microvm_machine_set_ioapic2(Object *obj, Visitor *v, const char *name,
void *opaque, Error **errp)
{
MicrovmMachineState *mms = MICROVM_MACHINE(obj);
visit_type_OnOffAuto(v, name, &mms->ioapic2, errp);
}
static bool microvm_machine_get_isa_serial(Object *obj, Error **errp)
{
MicrovmMachineState *mms = MICROVM_MACHINE(obj);
return mms->isa_serial;
}
static void microvm_machine_set_isa_serial(Object *obj, bool value,
Error **errp)
{
MicrovmMachineState *mms = MICROVM_MACHINE(obj);
mms->isa_serial = value;
}
static bool microvm_machine_get_option_roms(Object *obj, Error **errp)
{
MicrovmMachineState *mms = MICROVM_MACHINE(obj);
return mms->option_roms;
}
static void microvm_machine_set_option_roms(Object *obj, bool value,
Error **errp)
{
MicrovmMachineState *mms = MICROVM_MACHINE(obj);
mms->option_roms = value;
}
static bool microvm_machine_get_auto_kernel_cmdline(Object *obj, Error **errp)
{
MicrovmMachineState *mms = MICROVM_MACHINE(obj);
return mms->auto_kernel_cmdline;
}
static void microvm_machine_set_auto_kernel_cmdline(Object *obj, bool value,
Error **errp)
{
MicrovmMachineState *mms = MICROVM_MACHINE(obj);
mms->auto_kernel_cmdline = value;
}
static void microvm_machine_done(Notifier *notifier, void *data)
{
MicrovmMachineState *mms = container_of(notifier, MicrovmMachineState,
machine_done);
acpi_setup_microvm(mms);
dt_setup_microvm(mms);
}
static void microvm_powerdown_req(Notifier *notifier, void *data)
{
MicrovmMachineState *mms = container_of(notifier, MicrovmMachineState,
powerdown_req);
X86MachineState *x86ms = X86_MACHINE(mms);
if (x86ms->acpi_dev) {
Object *obj = OBJECT(x86ms->acpi_dev);
AcpiDeviceIfClass *adevc = ACPI_DEVICE_IF_GET_CLASS(obj);
adevc->send_event(ACPI_DEVICE_IF(x86ms->acpi_dev),
ACPI_POWER_DOWN_STATUS);
}
}
static void microvm_machine_initfn(Object *obj)
{
MicrovmMachineState *mms = MICROVM_MACHINE(obj);
/* Configuration */
mms->pic = ON_OFF_AUTO_AUTO;
mms->pit = ON_OFF_AUTO_AUTO;
mms->rtc = ON_OFF_AUTO_AUTO;
mms->pcie = ON_OFF_AUTO_AUTO;
mms->ioapic2 = ON_OFF_AUTO_AUTO;
mms->isa_serial = true;
mms->option_roms = true;
mms->auto_kernel_cmdline = true;
/* State */
mms->kernel_cmdline_fixed = false;
mms->machine_done.notify = microvm_machine_done;
qemu_add_machine_init_done_notifier(&mms->machine_done);
mms->powerdown_req.notify = microvm_powerdown_req;
qemu_register_powerdown_notifier(&mms->powerdown_req);
}
static void microvm_class_init(ObjectClass *oc, void *data)
{
X86MachineClass *x86mc = X86_MACHINE_CLASS(oc);
MachineClass *mc = MACHINE_CLASS(oc);
HotplugHandlerClass *hc = HOTPLUG_HANDLER_CLASS(oc);
mc->init = microvm_machine_state_init;
mc->family = "microvm_i386";
mc->desc = "microvm (i386)";
mc->units_per_default_bus = 1;
mc->no_floppy = 1;
mc->max_cpus = 288;
mc->has_hotpluggable_cpus = false;
mc->auto_enable_numa_with_memhp = false;
mc->auto_enable_numa_with_memdev = false;
mc->default_cpu_type = TARGET_DEFAULT_CPU_TYPE;
mc->nvdimm_supported = false;
mc->default_ram_id = "microvm.ram";
/* Avoid relying too much on kernel components */
mc->default_kernel_irqchip_split = true;
/* Machine class handlers */
mc->reset = microvm_machine_reset;
/* hotplug (for cpu coldplug) */
mc->get_hotplug_handler = microvm_get_hotplug_handler;
hc->pre_plug = microvm_device_pre_plug_cb;
hc->plug = microvm_device_plug_cb;
hc->unplug_request = microvm_device_unplug_request_cb;
hc->unplug = microvm_device_unplug_cb;
x86mc->fwcfg_dma_enabled = true;
object_class_property_add(oc, MICROVM_MACHINE_PIC, "OnOffAuto",
microvm_machine_get_pic,
microvm_machine_set_pic,
qom: Drop parameter @errp of object_property_add() & friends The only way object_property_add() can fail is when a property with the same name already exists. Since our property names are all hardcoded, failure is a programming error, and the appropriate way to handle it is passing &error_abort. Same for its variants, except for object_property_add_child(), which additionally fails when the child already has a parent. Parentage is also under program control, so this is a programming error, too. We have a bit over 500 callers. Almost half of them pass &error_abort, slightly fewer ignore errors, one test case handles errors, and the remaining few callers pass them to their own callers. The previous few commits demonstrated once again that ignoring programming errors is a bad idea. Of the few ones that pass on errors, several violate the Error API. The Error ** argument must be NULL, &error_abort, &error_fatal, or a pointer to a variable containing NULL. Passing an argument of the latter kind twice without clearing it in between is wrong: if the first call sets an error, it no longer points to NULL for the second call. ich9_pm_add_properties(), sparc32_ledma_realize(), sparc32_dma_realize(), xilinx_axidma_realize(), xilinx_enet_realize() are wrong that way. When the one appropriate choice of argument is &error_abort, letting users pick the argument is a bad idea. Drop parameter @errp and assert the preconditions instead. There's one exception to "duplicate property name is a programming error": the way object_property_add() implements the magic (and undocumented) "automatic arrayification". Don't drop @errp there. Instead, rename object_property_add() to object_property_try_add(), and add the obvious wrapper object_property_add(). Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20200505152926.18877-15-armbru@redhat.com> [Two semantic rebase conflicts resolved]
2020-05-05 17:29:22 +02:00
NULL, NULL);
object_class_property_set_description(oc, MICROVM_MACHINE_PIC,
"Enable i8259 PIC");
object_class_property_add(oc, MICROVM_MACHINE_PIT, "OnOffAuto",
microvm_machine_get_pit,
microvm_machine_set_pit,
qom: Drop parameter @errp of object_property_add() & friends The only way object_property_add() can fail is when a property with the same name already exists. Since our property names are all hardcoded, failure is a programming error, and the appropriate way to handle it is passing &error_abort. Same for its variants, except for object_property_add_child(), which additionally fails when the child already has a parent. Parentage is also under program control, so this is a programming error, too. We have a bit over 500 callers. Almost half of them pass &error_abort, slightly fewer ignore errors, one test case handles errors, and the remaining few callers pass them to their own callers. The previous few commits demonstrated once again that ignoring programming errors is a bad idea. Of the few ones that pass on errors, several violate the Error API. The Error ** argument must be NULL, &error_abort, &error_fatal, or a pointer to a variable containing NULL. Passing an argument of the latter kind twice without clearing it in between is wrong: if the first call sets an error, it no longer points to NULL for the second call. ich9_pm_add_properties(), sparc32_ledma_realize(), sparc32_dma_realize(), xilinx_axidma_realize(), xilinx_enet_realize() are wrong that way. When the one appropriate choice of argument is &error_abort, letting users pick the argument is a bad idea. Drop parameter @errp and assert the preconditions instead. There's one exception to "duplicate property name is a programming error": the way object_property_add() implements the magic (and undocumented) "automatic arrayification". Don't drop @errp there. Instead, rename object_property_add() to object_property_try_add(), and add the obvious wrapper object_property_add(). Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20200505152926.18877-15-armbru@redhat.com> [Two semantic rebase conflicts resolved]
2020-05-05 17:29:22 +02:00
NULL, NULL);
object_class_property_set_description(oc, MICROVM_MACHINE_PIT,
"Enable i8254 PIT");
object_class_property_add(oc, MICROVM_MACHINE_RTC, "OnOffAuto",
microvm_machine_get_rtc,
microvm_machine_set_rtc,
qom: Drop parameter @errp of object_property_add() & friends The only way object_property_add() can fail is when a property with the same name already exists. Since our property names are all hardcoded, failure is a programming error, and the appropriate way to handle it is passing &error_abort. Same for its variants, except for object_property_add_child(), which additionally fails when the child already has a parent. Parentage is also under program control, so this is a programming error, too. We have a bit over 500 callers. Almost half of them pass &error_abort, slightly fewer ignore errors, one test case handles errors, and the remaining few callers pass them to their own callers. The previous few commits demonstrated once again that ignoring programming errors is a bad idea. Of the few ones that pass on errors, several violate the Error API. The Error ** argument must be NULL, &error_abort, &error_fatal, or a pointer to a variable containing NULL. Passing an argument of the latter kind twice without clearing it in between is wrong: if the first call sets an error, it no longer points to NULL for the second call. ich9_pm_add_properties(), sparc32_ledma_realize(), sparc32_dma_realize(), xilinx_axidma_realize(), xilinx_enet_realize() are wrong that way. When the one appropriate choice of argument is &error_abort, letting users pick the argument is a bad idea. Drop parameter @errp and assert the preconditions instead. There's one exception to "duplicate property name is a programming error": the way object_property_add() implements the magic (and undocumented) "automatic arrayification". Don't drop @errp there. Instead, rename object_property_add() to object_property_try_add(), and add the obvious wrapper object_property_add(). Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20200505152926.18877-15-armbru@redhat.com> [Two semantic rebase conflicts resolved]
2020-05-05 17:29:22 +02:00
NULL, NULL);
object_class_property_set_description(oc, MICROVM_MACHINE_RTC,
"Enable MC146818 RTC");
object_class_property_add(oc, MICROVM_MACHINE_PCIE, "OnOffAuto",
microvm_machine_get_pcie,
microvm_machine_set_pcie,
NULL, NULL);
object_class_property_set_description(oc, MICROVM_MACHINE_PCIE,
"Enable PCIe");
object_class_property_add(oc, MICROVM_MACHINE_IOAPIC2, "OnOffAuto",
microvm_machine_get_ioapic2,
microvm_machine_set_ioapic2,
NULL, NULL);
object_class_property_set_description(oc, MICROVM_MACHINE_IOAPIC2,
"Enable second IO-APIC");
object_class_property_add_bool(oc, MICROVM_MACHINE_ISA_SERIAL,
microvm_machine_get_isa_serial,
qom: Drop parameter @errp of object_property_add() & friends The only way object_property_add() can fail is when a property with the same name already exists. Since our property names are all hardcoded, failure is a programming error, and the appropriate way to handle it is passing &error_abort. Same for its variants, except for object_property_add_child(), which additionally fails when the child already has a parent. Parentage is also under program control, so this is a programming error, too. We have a bit over 500 callers. Almost half of them pass &error_abort, slightly fewer ignore errors, one test case handles errors, and the remaining few callers pass them to their own callers. The previous few commits demonstrated once again that ignoring programming errors is a bad idea. Of the few ones that pass on errors, several violate the Error API. The Error ** argument must be NULL, &error_abort, &error_fatal, or a pointer to a variable containing NULL. Passing an argument of the latter kind twice without clearing it in between is wrong: if the first call sets an error, it no longer points to NULL for the second call. ich9_pm_add_properties(), sparc32_ledma_realize(), sparc32_dma_realize(), xilinx_axidma_realize(), xilinx_enet_realize() are wrong that way. When the one appropriate choice of argument is &error_abort, letting users pick the argument is a bad idea. Drop parameter @errp and assert the preconditions instead. There's one exception to "duplicate property name is a programming error": the way object_property_add() implements the magic (and undocumented) "automatic arrayification". Don't drop @errp there. Instead, rename object_property_add() to object_property_try_add(), and add the obvious wrapper object_property_add(). Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20200505152926.18877-15-armbru@redhat.com> [Two semantic rebase conflicts resolved]
2020-05-05 17:29:22 +02:00
microvm_machine_set_isa_serial);
object_class_property_set_description(oc, MICROVM_MACHINE_ISA_SERIAL,
"Set off to disable the instantiation an ISA serial port");
object_class_property_add_bool(oc, MICROVM_MACHINE_OPTION_ROMS,
microvm_machine_get_option_roms,
qom: Drop parameter @errp of object_property_add() & friends The only way object_property_add() can fail is when a property with the same name already exists. Since our property names are all hardcoded, failure is a programming error, and the appropriate way to handle it is passing &error_abort. Same for its variants, except for object_property_add_child(), which additionally fails when the child already has a parent. Parentage is also under program control, so this is a programming error, too. We have a bit over 500 callers. Almost half of them pass &error_abort, slightly fewer ignore errors, one test case handles errors, and the remaining few callers pass them to their own callers. The previous few commits demonstrated once again that ignoring programming errors is a bad idea. Of the few ones that pass on errors, several violate the Error API. The Error ** argument must be NULL, &error_abort, &error_fatal, or a pointer to a variable containing NULL. Passing an argument of the latter kind twice without clearing it in between is wrong: if the first call sets an error, it no longer points to NULL for the second call. ich9_pm_add_properties(), sparc32_ledma_realize(), sparc32_dma_realize(), xilinx_axidma_realize(), xilinx_enet_realize() are wrong that way. When the one appropriate choice of argument is &error_abort, letting users pick the argument is a bad idea. Drop parameter @errp and assert the preconditions instead. There's one exception to "duplicate property name is a programming error": the way object_property_add() implements the magic (and undocumented) "automatic arrayification". Don't drop @errp there. Instead, rename object_property_add() to object_property_try_add(), and add the obvious wrapper object_property_add(). Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20200505152926.18877-15-armbru@redhat.com> [Two semantic rebase conflicts resolved]
2020-05-05 17:29:22 +02:00
microvm_machine_set_option_roms);
object_class_property_set_description(oc, MICROVM_MACHINE_OPTION_ROMS,
"Set off to disable loading option ROMs");
object_class_property_add_bool(oc, MICROVM_MACHINE_AUTO_KERNEL_CMDLINE,
microvm_machine_get_auto_kernel_cmdline,
qom: Drop parameter @errp of object_property_add() & friends The only way object_property_add() can fail is when a property with the same name already exists. Since our property names are all hardcoded, failure is a programming error, and the appropriate way to handle it is passing &error_abort. Same for its variants, except for object_property_add_child(), which additionally fails when the child already has a parent. Parentage is also under program control, so this is a programming error, too. We have a bit over 500 callers. Almost half of them pass &error_abort, slightly fewer ignore errors, one test case handles errors, and the remaining few callers pass them to their own callers. The previous few commits demonstrated once again that ignoring programming errors is a bad idea. Of the few ones that pass on errors, several violate the Error API. The Error ** argument must be NULL, &error_abort, &error_fatal, or a pointer to a variable containing NULL. Passing an argument of the latter kind twice without clearing it in between is wrong: if the first call sets an error, it no longer points to NULL for the second call. ich9_pm_add_properties(), sparc32_ledma_realize(), sparc32_dma_realize(), xilinx_axidma_realize(), xilinx_enet_realize() are wrong that way. When the one appropriate choice of argument is &error_abort, letting users pick the argument is a bad idea. Drop parameter @errp and assert the preconditions instead. There's one exception to "duplicate property name is a programming error": the way object_property_add() implements the magic (and undocumented) "automatic arrayification". Don't drop @errp there. Instead, rename object_property_add() to object_property_try_add(), and add the obvious wrapper object_property_add(). Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20200505152926.18877-15-armbru@redhat.com> [Two semantic rebase conflicts resolved]
2020-05-05 17:29:22 +02:00
microvm_machine_set_auto_kernel_cmdline);
object_class_property_set_description(oc,
MICROVM_MACHINE_AUTO_KERNEL_CMDLINE,
"Set off to disable adding virtio-mmio devices to the kernel cmdline");
machine_class_allow_dynamic_sysbus_dev(mc, TYPE_RAMFB_DEVICE);
}
static const TypeInfo microvm_machine_info = {
.name = TYPE_MICROVM_MACHINE,
.parent = TYPE_X86_MACHINE,
.instance_size = sizeof(MicrovmMachineState),
.instance_init = microvm_machine_initfn,
.class_size = sizeof(MicrovmMachineClass),
.class_init = microvm_class_init,
.interfaces = (InterfaceInfo[]) {
{ TYPE_HOTPLUG_HANDLER },
{ }
},
};
static void microvm_machine_init(void)
{
type_register_static(&microvm_machine_info);
}
type_init(microvm_machine_init);