qemu-e2k/include/hw/ppc/spapr_drc.h

206 lines
7.0 KiB
C
Raw Normal View History

/*
* QEMU SPAPR Dynamic Reconfiguration Connector Implementation
*
* Copyright IBM Corp. 2014
*
* Authors:
* Michael Roth <mdroth@linux.vnet.ibm.com>
*
* This work is licensed under the terms of the GNU GPL, version 2 or later.
* See the COPYING file in the top-level directory.
*/
#if !defined(__HW_SPAPR_DRC_H__)
#define __HW_SPAPR_DRC_H__
#include "qom/object.h"
#include "hw/qdev.h"
#include "libfdt.h"
#define TYPE_SPAPR_DR_CONNECTOR "spapr-dr-connector"
#define SPAPR_DR_CONNECTOR_GET_CLASS(obj) \
OBJECT_GET_CLASS(sPAPRDRConnectorClass, obj, TYPE_SPAPR_DR_CONNECTOR)
#define SPAPR_DR_CONNECTOR_CLASS(klass) \
OBJECT_CLASS_CHECK(sPAPRDRConnectorClass, klass, \
TYPE_SPAPR_DR_CONNECTOR)
#define SPAPR_DR_CONNECTOR(obj) OBJECT_CHECK(sPAPRDRConnector, (obj), \
TYPE_SPAPR_DR_CONNECTOR)
/*
* Various hotplug types managed by sPAPRDRConnector
*
* these are somewhat arbitrary, but to make things easier
* when generating DRC indexes later we've aligned the bit
* positions with the values used to assign DRC indexes on
* pSeries. we use those values as bit shifts to allow for
* the OR'ing of these values in various QEMU routines, but
* for values exposed to the guest (via DRC indexes for
* instance) we will use the shift amounts.
*/
typedef enum {
SPAPR_DR_CONNECTOR_TYPE_SHIFT_CPU = 1,
SPAPR_DR_CONNECTOR_TYPE_SHIFT_PHB = 2,
SPAPR_DR_CONNECTOR_TYPE_SHIFT_VIO = 3,
SPAPR_DR_CONNECTOR_TYPE_SHIFT_PCI = 4,
SPAPR_DR_CONNECTOR_TYPE_SHIFT_LMB = 8,
} sPAPRDRConnectorTypeShift;
typedef enum {
SPAPR_DR_CONNECTOR_TYPE_ANY = ~0,
SPAPR_DR_CONNECTOR_TYPE_CPU = 1 << SPAPR_DR_CONNECTOR_TYPE_SHIFT_CPU,
SPAPR_DR_CONNECTOR_TYPE_PHB = 1 << SPAPR_DR_CONNECTOR_TYPE_SHIFT_PHB,
SPAPR_DR_CONNECTOR_TYPE_VIO = 1 << SPAPR_DR_CONNECTOR_TYPE_SHIFT_VIO,
SPAPR_DR_CONNECTOR_TYPE_PCI = 1 << SPAPR_DR_CONNECTOR_TYPE_SHIFT_PCI,
SPAPR_DR_CONNECTOR_TYPE_LMB = 1 << SPAPR_DR_CONNECTOR_TYPE_SHIFT_LMB,
} sPAPRDRConnectorType;
/*
* set via set-indicator RTAS calls
* as documented by PAPR+ 2.7 13.5.3.4, Table 177
*
* isolated: put device under firmware control
* unisolated: claim OS control of device (may or may not be in use)
*/
typedef enum {
SPAPR_DR_ISOLATION_STATE_ISOLATED = 0,
SPAPR_DR_ISOLATION_STATE_UNISOLATED = 1
} sPAPRDRIsolationState;
/*
* set via set-indicator RTAS calls
* as documented by PAPR+ 2.7 13.5.3.4, Table 177
*
* unusable: mark device as unavailable to OS
* usable: mark device as available to OS
* exchange: (currently unused)
* recover: (currently unused)
*/
typedef enum {
SPAPR_DR_ALLOCATION_STATE_UNUSABLE = 0,
SPAPR_DR_ALLOCATION_STATE_USABLE = 1,
SPAPR_DR_ALLOCATION_STATE_EXCHANGE = 2,
SPAPR_DR_ALLOCATION_STATE_RECOVER = 3
} sPAPRDRAllocationState;
/*
* LED/visual indicator state
*
* set via set-indicator RTAS calls
* as documented by PAPR+ 2.7 13.5.3.4, Table 177,
* and PAPR+ 2.7 13.5.4.1, Table 180
*
* inactive: hotpluggable entity inactive and safely removable
* active: hotpluggable entity in use and not safely removable
* identify: (currently unused)
* action: (currently unused)
*/
typedef enum {
SPAPR_DR_INDICATOR_STATE_INACTIVE = 0,
SPAPR_DR_INDICATOR_STATE_ACTIVE = 1,
SPAPR_DR_INDICATOR_STATE_IDENTIFY = 2,
SPAPR_DR_INDICATOR_STATE_ACTION = 3,
} sPAPRDRIndicatorState;
/*
* returned via get-sensor-state RTAS calls
* as documented by PAPR+ 2.7 13.5.3.3, Table 175:
*
* empty: connector slot empty (e.g. empty hotpluggable PCI slot)
* present: connector slot populated and device available to OS
* unusable: device not currently available to OS
* exchange: (currently unused)
* recover: (currently unused)
*/
typedef enum {
SPAPR_DR_ENTITY_SENSE_EMPTY = 0,
SPAPR_DR_ENTITY_SENSE_PRESENT = 1,
SPAPR_DR_ENTITY_SENSE_UNUSABLE = 2,
SPAPR_DR_ENTITY_SENSE_EXCHANGE = 3,
SPAPR_DR_ENTITY_SENSE_RECOVER = 4,
} sPAPRDREntitySense;
typedef enum {
SPAPR_DR_CC_RESPONSE_NEXT_SIB = 1, /* currently unused */
SPAPR_DR_CC_RESPONSE_NEXT_CHILD = 2,
SPAPR_DR_CC_RESPONSE_NEXT_PROPERTY = 3,
SPAPR_DR_CC_RESPONSE_PREV_PARENT = 4,
SPAPR_DR_CC_RESPONSE_SUCCESS = 0,
SPAPR_DR_CC_RESPONSE_ERROR = -1,
SPAPR_DR_CC_RESPONSE_CONTINUE = -2,
SPAPR_DR_CC_RESPONSE_NOT_CONFIGURABLE = -9003,
} sPAPRDRCCResponse;
typedef void (spapr_drc_detach_cb)(DeviceState *d, void *opaque);
typedef struct sPAPRDRConnector {
/*< private >*/
DeviceState parent;
sPAPRDRConnectorType type;
uint32_t id;
Object *owner;
const char *name;
/* sensor/indicator states */
uint32_t isolation_state;
uint32_t allocation_state;
uint32_t indicator_state;
/* configure-connector state */
void *fdt;
int fdt_start_offset;
bool configured;
bool awaiting_release;
spapr_drc: enable immediate detach for unsignalled devices Currently spapr doesn't support "aborting" hotplug of PCI devices by allowing device_del to immediately remove the device if we haven't signalled the presence of the device to the guest. In the past this wasn't an issue, since we always immediately signalled device attach and simply relied on full guest-aware add->remove path for device removal. However, as of 788d259, we now defer signalling for PCI functions until function 0 is attached, so now we need to deal with these "abort" operations for cases where a user hotplugs a non-0 function, then opts to remove it prior hotplugging function 0. Currently they'd have to reboot before the unplug completed. PCIe multifunction hotplug does not have this requirement however, so from a management implementation perspective it would be good to address this within the same release as 788d259. We accomplish this by simply adding a 'signalled' flag to track whether a device hotplug event has been sent to the guest. If it hasn't, we allow immediate removal under the assumption that the guest will not be using the device. Devices present at boot/reset time are also assumed to be 'signalled'. For CPU/memory/etc, signalling will still happen immediately as part of device_add, so only PCI functions should be affected. Cc: bharata@linux.vnet.ibm.com Cc: david@gibson.dropbear.id.au Cc: sbhat@linux.vnet.ibm.com Cc: qemu-ppc@nongnu.org Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com> [dwg: This fixes a regression where an incorrect hot-add of a non-zero function can no longer be backed out until function 0 is added] Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2016-04-01 00:27:37 +02:00
bool signalled;
bool awaiting_allocation;
/* device pointer, via link property */
DeviceState *dev;
spapr_drc_detach_cb *detach_cb;
void *detach_cb_opaque;
} sPAPRDRConnector;
typedef struct sPAPRDRConnectorClass {
/*< private >*/
DeviceClass parent;
/*< public >*/
/* accessors for guest-visible (generally via RTAS) DR state */
uint32_t (*set_isolation_state)(sPAPRDRConnector *drc,
sPAPRDRIsolationState state);
uint32_t (*set_indicator_state)(sPAPRDRConnector *drc,
sPAPRDRIndicatorState state);
uint32_t (*set_allocation_state)(sPAPRDRConnector *drc,
sPAPRDRAllocationState state);
uint32_t (*get_index)(sPAPRDRConnector *drc);
uint32_t (*get_type)(sPAPRDRConnector *drc);
const char *(*get_name)(sPAPRDRConnector *drc);
uint32_t (*entity_sense)(sPAPRDRConnector *drc, sPAPRDREntitySense *state);
/* QEMU interfaces for managing FDT/configure-connector */
const void *(*get_fdt)(sPAPRDRConnector *drc, int *fdt_start_offset);
void (*set_configured)(sPAPRDRConnector *drc);
/* QEMU interfaces for managing hotplug operations */
void (*attach)(sPAPRDRConnector *drc, DeviceState *d, void *fdt,
int fdt_start_offset, bool coldplug, Error **errp);
void (*detach)(sPAPRDRConnector *drc, DeviceState *d,
spapr_drc_detach_cb *detach_cb,
void *detach_cb_opaque, Error **errp);
bool (*release_pending)(sPAPRDRConnector *drc);
spapr_drc: enable immediate detach for unsignalled devices Currently spapr doesn't support "aborting" hotplug of PCI devices by allowing device_del to immediately remove the device if we haven't signalled the presence of the device to the guest. In the past this wasn't an issue, since we always immediately signalled device attach and simply relied on full guest-aware add->remove path for device removal. However, as of 788d259, we now defer signalling for PCI functions until function 0 is attached, so now we need to deal with these "abort" operations for cases where a user hotplugs a non-0 function, then opts to remove it prior hotplugging function 0. Currently they'd have to reboot before the unplug completed. PCIe multifunction hotplug does not have this requirement however, so from a management implementation perspective it would be good to address this within the same release as 788d259. We accomplish this by simply adding a 'signalled' flag to track whether a device hotplug event has been sent to the guest. If it hasn't, we allow immediate removal under the assumption that the guest will not be using the device. Devices present at boot/reset time are also assumed to be 'signalled'. For CPU/memory/etc, signalling will still happen immediately as part of device_add, so only PCI functions should be affected. Cc: bharata@linux.vnet.ibm.com Cc: david@gibson.dropbear.id.au Cc: sbhat@linux.vnet.ibm.com Cc: qemu-ppc@nongnu.org Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com> [dwg: This fixes a regression where an incorrect hot-add of a non-zero function can no longer be backed out until function 0 is added] Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2016-04-01 00:27:37 +02:00
void (*set_signalled)(sPAPRDRConnector *drc);
} sPAPRDRConnectorClass;
sPAPRDRConnector *spapr_dr_connector_new(Object *owner,
sPAPRDRConnectorType type,
uint32_t id);
sPAPRDRConnector *spapr_dr_connector_by_index(uint32_t index);
sPAPRDRConnector *spapr_dr_connector_by_id(sPAPRDRConnectorType type,
uint32_t id);
int spapr_drc_populate_dt(void *fdt, int fdt_offset, Object *owner,
uint32_t drc_type_mask);
#endif /* __HW_SPAPR_DRC_H__ */