2013-03-01 13:59:19 +01:00
|
|
|
common-obj-y += scsi-disk.o
|
|
|
|
|
common-obj-y += scsi-generic.o scsi-bus.o
|
|
|
|
|
common-obj-$(CONFIG_LSI_SCSI_PCI) += lsi53c895a.o
|
hw: Add support for LSI SAS1068 (mptsas) device
This adds the SAS1068 device, a SAS disk controller used in VMware that
is oldish but widely supported and has decent performance. Unlike
megasas, it presents itself as a SAS controller and not as a RAID
controller. The device corresponds to the mptsas kernel driver in
Linux.
A few small things in the device setup are based on Don Slutz's old
patch, but the device emulation was written from scratch based on Don's
SeaBIOS patch and on the FreeBSD and Linux drivers. It is 2400 lines
shorter than Don's patch (and roughly the same size as MegaSAS---also
because it doesn't support the similar SPI controller), implements SCSI
task management functions (with asynchronous cancellation), supports
big-endian hosts, has complete support for migration and follows the
QEMU coding standards much more closely.
To write the driver, I first split Don's patch in two parts, with
the configuration bits in one file and the rest in a separate file.
I first left mptconfig.c in place and rewrote the rest, then deleted
mptconfig.c as well. The configuration pages are still based mostly on
VirtualBox's, though not exactly the same. However, the implementation
is completely different. The contents of the pages themselves should
not be copyrightable.
Signed-off-by: Don Slutz <Don@CloudSwitch.com>
Message-Id: <1347382813-5662-1-git-send-email-Don@CloudSwitch.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-10-27 18:26:06 +01:00
|
|
|
common-obj-$(CONFIG_MPTSAS_SCSI_PCI) += mptsas.o mptconfig.o mptendian.o
|
2013-03-01 13:59:19 +01:00
|
|
|
common-obj-$(CONFIG_MEGASAS_SCSI_PCI) += megasas.o
|
2013-04-19 09:05:46 +02:00
|
|
|
common-obj-$(CONFIG_VMW_PVSCSI_SCSI_PCI) += vmw_pvscsi.o
|
2013-03-01 13:59:19 +01:00
|
|
|
common-obj-$(CONFIG_ESP) += esp.o
|
|
|
|
|
common-obj-$(CONFIG_ESP_PCI) += esp-pci.o
|
2013-02-05 13:39:38 +01:00
|
|
|
obj-$(CONFIG_PSERIES) += spapr_vscsi.o
|
vhost-scsi: new device supporting the tcm_vhost Linux kernel module
The WWPN specified in configfs is passed to "-device vhost-scsi-pci".
The tgpt field of the SET_ENDPOINT ioctl is obsolete now, so it is not
available from the QEMU command-line. Instead, I hardcode it to zero.
Changes in Patch-v2:
- Add vhost_scsi_get_features() in order to determine feature bits
supports by host kernel (mst + nab)
- Re-enable usage of DEFINE_VIRTIO_COMMON_FEATURES, and allow
EVENT_IDX to be disabled by host in vhost_scsi_get_features()
- Drop unused hotplug bit in DEFINE_VHOST_SCSI_PROPERTIES
Changes in Patch-v1:
- Set event_idx=off by default (nab, thanks asias)
- Disable hotplug feature bit for v3.9 tcm_vhost kernel code, need to
re-enable in v3.10 (nab)
- Update to latest qemu.git/master HEAD
Changes in WIP-V3:
- Drop ioeventfd vhost_scsi_properties (asias, thanks stefanha)
- Add CONFIG_VHOST_SCSI (asias, thanks stefanha)
- Add hotplug feature bit
Changes in WIP-V2:
- Add backend guest masking support (nab)
- Bump ABI_VERSION to 1 (nab)
- Set up set_guest_notifiers (asias)
- Set up vs->dev.vq_index (asias)
- Drop vs->vs.vdev.{set,clear}_vhost_endpoint (asias)
- Drop VIRTIO_CONFIG_S_DRIVER check in vhost_scsi_set_status (asias)
Howto:
Use the latest seabios, at least commit b44a7be17b
git clone git://git.seabios.org/seabios.git
make
cp out/bios.bin /usr/share/qemu/bios.bin
qemu -device vhost-scsi-pci,wwpn=naa.6001405bd4e8476d,event_idx=off
...
Cc: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Signed-off-by: Asias He <asias@redhat.com>
[ Rebase on top of VirtIOSCSICommon patch, fix bugs in feature
negotiation and irqfd masking - Paolo ]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-03-29 02:08:16 +01:00
|
|
|
|
|
|
|
|
ifeq ($(CONFIG_VIRTIO),y)
|
2014-09-23 09:49:24 +02:00
|
|
|
obj-y += virtio-scsi.o virtio-scsi-dataplane.o
|
vhost-scsi: new device supporting the tcm_vhost Linux kernel module
The WWPN specified in configfs is passed to "-device vhost-scsi-pci".
The tgpt field of the SET_ENDPOINT ioctl is obsolete now, so it is not
available from the QEMU command-line. Instead, I hardcode it to zero.
Changes in Patch-v2:
- Add vhost_scsi_get_features() in order to determine feature bits
supports by host kernel (mst + nab)
- Re-enable usage of DEFINE_VIRTIO_COMMON_FEATURES, and allow
EVENT_IDX to be disabled by host in vhost_scsi_get_features()
- Drop unused hotplug bit in DEFINE_VHOST_SCSI_PROPERTIES
Changes in Patch-v1:
- Set event_idx=off by default (nab, thanks asias)
- Disable hotplug feature bit for v3.9 tcm_vhost kernel code, need to
re-enable in v3.10 (nab)
- Update to latest qemu.git/master HEAD
Changes in WIP-V3:
- Drop ioeventfd vhost_scsi_properties (asias, thanks stefanha)
- Add CONFIG_VHOST_SCSI (asias, thanks stefanha)
- Add hotplug feature bit
Changes in WIP-V2:
- Add backend guest masking support (nab)
- Bump ABI_VERSION to 1 (nab)
- Set up set_guest_notifiers (asias)
- Set up vs->dev.vq_index (asias)
- Drop vs->vs.vdev.{set,clear}_vhost_endpoint (asias)
- Drop VIRTIO_CONFIG_S_DRIVER check in vhost_scsi_set_status (asias)
Howto:
Use the latest seabios, at least commit b44a7be17b
git clone git://git.seabios.org/seabios.git
make
cp out/bios.bin /usr/share/qemu/bios.bin
qemu -device vhost-scsi-pci,wwpn=naa.6001405bd4e8476d,event_idx=off
...
Cc: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Signed-off-by: Asias He <asias@redhat.com>
[ Rebase on top of VirtIOSCSICommon patch, fix bugs in feature
negotiation and irqfd masking - Paolo ]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-03-29 02:08:16 +01:00
|
|
|
obj-$(CONFIG_VHOST_SCSI) += vhost-scsi.o
|
|
|
|
|
endif
|