qemu-e2k/hw/block/xen-block.c

Ignoring revisions in .git-blame-ignore-revs. Click here to bypass and see the normal blame view.

1177 lines
32 KiB
C
Raw Normal View History

/*
* Copyright (c) 2018 Citrix Systems Inc.
*
* This work is licensed under the terms of the GNU GPL, version 2 or later.
* See the COPYING file in the top-level directory.
*/
#include "qemu/osdep.h"
#include "qemu/cutils.h"
#include "qemu/main-loop.h"
#include "qemu/module.h"
#include "qemu/option.h"
#include "qapi/error.h"
#include "qapi/qapi-commands-block-core.h"
#include "qapi/qapi-commands-qom.h"
#include "qapi/qapi-visit-block-core.h"
#include "qapi/qobject-input-visitor.h"
#include "qapi/visitor.h"
#include "qapi/qmp/qdict.h"
#include "qapi/qmp/qstring.h"
#include "qom/object_interfaces.h"
#include "hw/block/xen_blkif.h"
#include "hw/qdev-properties.h"
#include "hw/xen/xen-block.h"
#include "hw/xen/xen-backend.h"
#include "sysemu/blockdev.h"
#include "sysemu/block-backend.h"
#include "sysemu/iothread.h"
#include "dataplane/xen-block.h"
#include "hw/xen/interface/io/xs_wire.h"
#include "trace.h"
#define XVDA_MAJOR 202
#define XVDQ_MAJOR (1 << 20)
#define XVDBGQCV_MAJOR ((1 << 21) - 1)
#define HDA_MAJOR 3
#define HDC_MAJOR 22
#define SDA_MAJOR 8
static int vdev_to_diskno(unsigned int vdev_nr)
{
switch (vdev_nr >> 8) {
case XVDA_MAJOR:
case SDA_MAJOR:
return (vdev_nr >> 4) & 0x15;
case HDA_MAJOR:
return (vdev_nr >> 6) & 1;
case HDC_MAJOR:
return ((vdev_nr >> 6) & 1) + 2;
case XVDQ_MAJOR ... XVDBGQCV_MAJOR:
return (vdev_nr >> 8) & 0xfffff;
default:
return -1;
}
}
#define MAX_AUTO_VDEV 4096
/*
* Find a free device name in the xvda xvdfan range and set it in
* blockdev->props.vdev. Our definition of "free" is that there must
* be no other disk or partition with the same disk number.
*
* You are technically permitted to have all of hda, hda1, sda, sda1,
* xvda and xvda1 as *separate* PV block devices with separate backing
* stores. That doesn't make it a good idea. This code will skip xvda
* if *any* of those "conflicting" devices already exists.
*
* The limit of xvdfan (disk 4095) is fairly arbitrary just to avoid a
* stupidly sized bitmap, but Linux as of v6.6 doesn't support anything
* higher than that anyway.
*/
static bool xen_block_find_free_vdev(XenBlockDevice *blockdev, Error **errp)
{
XenBus *xenbus = XEN_BUS(qdev_get_parent_bus(DEVICE(blockdev)));
unsigned long used_devs[BITS_TO_LONGS(MAX_AUTO_VDEV)];
XenBlockVdev *vdev = &blockdev->props.vdev;
char fe_path[XENSTORE_ABS_PATH_MAX + 1];
char **existing_frontends;
unsigned int nr_existing = 0;
unsigned int vdev_nr;
int i, disk = 0;
snprintf(fe_path, sizeof(fe_path), "/local/domain/%u/device/vbd",
blockdev->xendev.frontend_id);
existing_frontends = qemu_xen_xs_directory(xenbus->xsh, XBT_NULL, fe_path,
&nr_existing);
if (!existing_frontends) {
if (errno == ENOENT) {
/*
* If the frontend directory doesn't exist because there are
* no existing vbd devices, that's fine. Just ensure that we
* don't dereference the NULL existing_frontends pointer, by
* checking that nr_existing is zero so the loop below is not
* entered.
*
* In fact this is redundant since nr_existing is initialized
* to zero, but setting it again here makes it abundantly clear
* to Coverity, and to the human reader who doesn't know the
* semantics of qemu_xen_xs_directory() off the top of their
* head.
*/
nr_existing = 0;
} else {
/* All other errors accessing the frontend directory are fatal. */
error_setg_errno(errp, errno, "cannot read %s", fe_path);
return false;
}
}
memset(used_devs, 0, sizeof(used_devs));
for (i = 0; i < nr_existing; i++) {
if (qemu_strtoui(existing_frontends[i], NULL, 10, &vdev_nr)) {
free(existing_frontends[i]);
continue;
}
free(existing_frontends[i]);
disk = vdev_to_diskno(vdev_nr);
if (disk < 0 || disk >= MAX_AUTO_VDEV) {
continue;
}
set_bit(disk, used_devs);
}
free(existing_frontends);
disk = find_first_zero_bit(used_devs, MAX_AUTO_VDEV);
if (disk == MAX_AUTO_VDEV) {
error_setg(errp, "cannot find device vdev for block device");
return false;
}
vdev->type = XEN_BLOCK_VDEV_TYPE_XVD;
vdev->partition = 0;
vdev->disk = disk;
if (disk < (1 << 4)) {
vdev->number = (XVDA_MAJOR << 8) | (disk << 4);
} else {
vdev->number = (XVDQ_MAJOR << 8) | (disk << 8);
}
return true;
}
static char *xen_block_get_name(XenDevice *xendev, Error **errp)
{
XenBlockDevice *blockdev = XEN_BLOCK_DEVICE(xendev);
XenBlockVdev *vdev = &blockdev->props.vdev;
if (vdev->type == XEN_BLOCK_VDEV_TYPE_INVALID &&
!xen_block_find_free_vdev(blockdev, errp)) {
return NULL;
}
return g_strdup_printf("%lu", vdev->number);
}
static void xen_block_disconnect(XenDevice *xendev, Error **errp)
{
XenBlockDevice *blockdev = XEN_BLOCK_DEVICE(xendev);
const char *type = object_get_typename(OBJECT(blockdev));
XenBlockVdev *vdev = &blockdev->props.vdev;
trace_xen_block_disconnect(type, vdev->disk, vdev->partition);
xen_block_dataplane_stop(blockdev->dataplane);
}
static void xen_block_connect(XenDevice *xendev, Error **errp)
{
XenBlockDevice *blockdev = XEN_BLOCK_DEVICE(xendev);
const char *type = object_get_typename(OBJECT(blockdev));
XenBlockVdev *vdev = &blockdev->props.vdev;
BlockConf *conf = &blockdev->props.conf;
unsigned int feature_large_sector_size;
unsigned int order, nr_ring_ref, *ring_ref, event_channel, protocol;
char *str;
trace_xen_block_connect(type, vdev->disk, vdev->partition);
if (xen_device_frontend_scanf(xendev, "feature-large-sector-size", "%u",
&feature_large_sector_size) != 1) {
feature_large_sector_size = 0;
}
if (feature_large_sector_size != 1 &&
conf->logical_block_size != XEN_BLKIF_SECTOR_SIZE) {
error_setg(errp, "logical_block_size != %u not supported by frontend",
XEN_BLKIF_SECTOR_SIZE);
return;
}
if (xen_device_frontend_scanf(xendev, "ring-page-order", "%u",
&order) != 1) {
nr_ring_ref = 1;
ring_ref = g_new(unsigned int, nr_ring_ref);
if (xen_device_frontend_scanf(xendev, "ring-ref", "%u",
&ring_ref[0]) != 1) {
error_setg(errp, "failed to read ring-ref");
g_free(ring_ref);
return;
}
} else if (qemu_xen_gnttab_can_map_multi() &&
order <= blockdev->props.max_ring_page_order) {
unsigned int i;
nr_ring_ref = 1 << order;
ring_ref = g_new(unsigned int, nr_ring_ref);
for (i = 0; i < nr_ring_ref; i++) {
const char *key = g_strdup_printf("ring-ref%u", i);
if (xen_device_frontend_scanf(xendev, key, "%u",
&ring_ref[i]) != 1) {
error_setg(errp, "failed to read %s", key);
g_free((gpointer)key);
g_free(ring_ref);
return;
}
g_free((gpointer)key);
}
} else {
error_setg(errp, "invalid ring-page-order (%d)", order);
return;
}
if (xen_device_frontend_scanf(xendev, "event-channel", "%u",
&event_channel) != 1) {
error_setg(errp, "failed to read event-channel");
g_free(ring_ref);
return;
}
if (xen_device_frontend_scanf(xendev, "protocol", "%ms", &str) != 1) {
/* x86 defaults to the 32-bit protocol even for 64-bit guests. */
if (object_dynamic_cast(OBJECT(qdev_get_machine()), "x86-machine")) {
protocol = BLKIF_PROTOCOL_X86_32;
} else {
protocol = BLKIF_PROTOCOL_NATIVE;
}
} else {
if (strcmp(str, XEN_IO_PROTO_ABI_X86_32) == 0) {
protocol = BLKIF_PROTOCOL_X86_32;
} else if (strcmp(str, XEN_IO_PROTO_ABI_X86_64) == 0) {
protocol = BLKIF_PROTOCOL_X86_64;
} else {
protocol = BLKIF_PROTOCOL_NATIVE;
}
free(str);
}
xen_block_dataplane_start(blockdev->dataplane, ring_ref, nr_ring_ref,
event_channel, protocol, errp);
g_free(ring_ref);
}
qdev: Unrealize must not fail Devices may have component devices and buses. Device realization may fail. Realization is recursive: a device's realize() method realizes its components, and device_set_realized() realizes its buses (which should in turn realize the devices on that bus, except bus_set_realized() doesn't implement that, yet). When realization of a component or bus fails, we need to roll back: unrealize everything we realized so far. If any of these unrealizes failed, the device would be left in an inconsistent state. Must not happen. device_set_realized() lets it happen: it ignores errors in the roll back code starting at label child_realize_fail. Since realization is recursive, unrealization must be recursive, too. But how could a partly failed unrealize be rolled back? We'd have to re-realize, which can fail. This design is fundamentally broken. device_set_realized() does not roll back at all. Instead, it keeps unrealizing, ignoring further errors. It can screw up even for a device with no buses: if the lone dc->unrealize() fails, it still unregisters vmstate, and calls listeners' unrealize() callback. bus_set_realized() does not roll back either. Instead, it stops unrealizing. Fortunately, no unrealize method can fail, as we'll see below. To fix the design error, drop parameter @errp from all the unrealize methods. Any unrealize method that uses @errp now needs an update. This leads us to unrealize() methods that can fail. Merely passing it to another unrealize method cannot cause failure, though. Here are the ones that do other things with @errp: * virtio_serial_device_unrealize() Fails when qbus_set_hotplug_handler() fails, but still does all the other work. On failure, the device would stay realized with its resources completely gone. Oops. Can't happen, because qbus_set_hotplug_handler() can't actually fail here. Pass &error_abort to qbus_set_hotplug_handler() instead. * hw/ppc/spapr_drc.c's unrealize() Fails when object_property_del() fails, but all the other work is already done. On failure, the device would stay realized with its vmstate registration gone. Oops. Can't happen, because object_property_del() can't actually fail here. Pass &error_abort to object_property_del() instead. * spapr_phb_unrealize() Fails and bails out when remove_drcs() fails, but other work is already done. On failure, the device would stay realized with some of its resources gone. Oops. remove_drcs() fails only when chassis_from_bus()'s object_property_get_uint() fails, and it can't here. Pass &error_abort to remove_drcs() instead. Therefore, no unrealize method can fail before this patch. device_set_realized()'s recursive unrealization via bus uses object_property_set_bool(). Can't drop @errp there, so pass &error_abort. We similarly unrealize with object_property_set_bool() elsewhere, always ignoring errors. Pass &error_abort instead. Several unrealize methods no longer handle errors from other unrealize methods: virtio_9p_device_unrealize(), virtio_input_device_unrealize(), scsi_qdev_unrealize(), ... Much of the deleted error handling looks wrong anyway. One unrealize methods no longer ignore such errors: usb_ehci_pci_exit(). Several realize methods no longer ignore errors when rolling back: v9fs_device_realize_common(), pci_qdev_unrealize(), spapr_phb_realize(), usb_qdev_realize(), vfio_ccw_realize(), virtio_device_realize(). Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20200505152926.18877-17-armbru@redhat.com>
2020-05-05 17:29:24 +02:00
static void xen_block_unrealize(XenDevice *xendev)
{
XenBlockDevice *blockdev = XEN_BLOCK_DEVICE(xendev);
XenBlockDeviceClass *blockdev_class =
XEN_BLOCK_DEVICE_GET_CLASS(xendev);
const char *type = object_get_typename(OBJECT(blockdev));
XenBlockVdev *vdev = &blockdev->props.vdev;
if (vdev->type == XEN_BLOCK_VDEV_TYPE_INVALID) {
return;
}
trace_xen_block_unrealize(type, vdev->disk, vdev->partition);
/* Disconnect from the frontend in case this has not already happened */
xen_block_disconnect(xendev, NULL);
xen_block_dataplane_destroy(blockdev->dataplane);
blockdev->dataplane = NULL;
if (blockdev_class->unrealize) {
qdev: Unrealize must not fail Devices may have component devices and buses. Device realization may fail. Realization is recursive: a device's realize() method realizes its components, and device_set_realized() realizes its buses (which should in turn realize the devices on that bus, except bus_set_realized() doesn't implement that, yet). When realization of a component or bus fails, we need to roll back: unrealize everything we realized so far. If any of these unrealizes failed, the device would be left in an inconsistent state. Must not happen. device_set_realized() lets it happen: it ignores errors in the roll back code starting at label child_realize_fail. Since realization is recursive, unrealization must be recursive, too. But how could a partly failed unrealize be rolled back? We'd have to re-realize, which can fail. This design is fundamentally broken. device_set_realized() does not roll back at all. Instead, it keeps unrealizing, ignoring further errors. It can screw up even for a device with no buses: if the lone dc->unrealize() fails, it still unregisters vmstate, and calls listeners' unrealize() callback. bus_set_realized() does not roll back either. Instead, it stops unrealizing. Fortunately, no unrealize method can fail, as we'll see below. To fix the design error, drop parameter @errp from all the unrealize methods. Any unrealize method that uses @errp now needs an update. This leads us to unrealize() methods that can fail. Merely passing it to another unrealize method cannot cause failure, though. Here are the ones that do other things with @errp: * virtio_serial_device_unrealize() Fails when qbus_set_hotplug_handler() fails, but still does all the other work. On failure, the device would stay realized with its resources completely gone. Oops. Can't happen, because qbus_set_hotplug_handler() can't actually fail here. Pass &error_abort to qbus_set_hotplug_handler() instead. * hw/ppc/spapr_drc.c's unrealize() Fails when object_property_del() fails, but all the other work is already done. On failure, the device would stay realized with its vmstate registration gone. Oops. Can't happen, because object_property_del() can't actually fail here. Pass &error_abort to object_property_del() instead. * spapr_phb_unrealize() Fails and bails out when remove_drcs() fails, but other work is already done. On failure, the device would stay realized with some of its resources gone. Oops. remove_drcs() fails only when chassis_from_bus()'s object_property_get_uint() fails, and it can't here. Pass &error_abort to remove_drcs() instead. Therefore, no unrealize method can fail before this patch. device_set_realized()'s recursive unrealization via bus uses object_property_set_bool(). Can't drop @errp there, so pass &error_abort. We similarly unrealize with object_property_set_bool() elsewhere, always ignoring errors. Pass &error_abort instead. Several unrealize methods no longer handle errors from other unrealize methods: virtio_9p_device_unrealize(), virtio_input_device_unrealize(), scsi_qdev_unrealize(), ... Much of the deleted error handling looks wrong anyway. One unrealize methods no longer ignore such errors: usb_ehci_pci_exit(). Several realize methods no longer ignore errors when rolling back: v9fs_device_realize_common(), pci_qdev_unrealize(), spapr_phb_realize(), usb_qdev_realize(), vfio_ccw_realize(), virtio_device_realize(). Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20200505152926.18877-17-armbru@redhat.com>
2020-05-05 17:29:24 +02:00
blockdev_class->unrealize(blockdev);
}
}
static void xen_block_set_size(XenBlockDevice *blockdev)
{
const char *type = object_get_typename(OBJECT(blockdev));
XenBlockVdev *vdev = &blockdev->props.vdev;
BlockConf *conf = &blockdev->props.conf;
int64_t sectors = blk_getlength(conf->blk) / conf->logical_block_size;
XenDevice *xendev = XEN_DEVICE(blockdev);
trace_xen_block_size(type, vdev->disk, vdev->partition, sectors);
xen_device_backend_printf(xendev, "sectors", "%"PRIi64, sectors);
}
static void xen_block_resize_cb(void *opaque)
{
XenBlockDevice *blockdev = opaque;
XenDevice *xendev = XEN_DEVICE(blockdev);
enum xenbus_state state = xen_device_backend_get_state(xendev);
xen_block_set_size(blockdev);
/*
* Mimic the behaviour of Linux xen-blkback and re-write the state
* to trigger the frontend watch.
*/
xen_device_backend_printf(xendev, "state", "%u", state);
}
/* Suspend request handling */
static void xen_block_drained_begin(void *opaque)
{
XenBlockDevice *blockdev = opaque;
xen_block_dataplane_detach(blockdev->dataplane);
}
/* Resume request handling */
static void xen_block_drained_end(void *opaque)
{
XenBlockDevice *blockdev = opaque;
xen_block_dataplane_attach(blockdev->dataplane);
}
static const BlockDevOps xen_block_dev_ops = {
.resize_cb = xen_block_resize_cb,
.drained_begin = xen_block_drained_begin,
.drained_end = xen_block_drained_end,
};
static void xen_block_realize(XenDevice *xendev, Error **errp)
{
xen: Use ERRP_GUARD() If we want to check error after errp-function call, we need to introduce local_err and then propagate it to errp. Instead, use the ERRP_GUARD() macro, benefits are: 1. No need of explicit error_propagate call 2. No need of explicit local_err variable: use errp directly 3. ERRP_GUARD() leaves errp as is if it's not NULL or &error_fatal, this means that we don't break error_abort (we'll abort on error_set, not on error_propagate) If we want to add some info to errp (by error_prepend() or error_append_hint()), we must use the ERRP_GUARD() macro. Otherwise, this info will not be added when errp == &error_fatal (the program will exit prior to the error_append_hint() or error_prepend() call). No such cases are being fixed here. This commit is generated by command sed -n '/^X86 Xen CPUs$/,/^$/{s/^F: //p}' MAINTAINERS | \ xargs git ls-files | grep '\.[hc]$' | \ xargs spatch \ --sp-file scripts/coccinelle/errp-guard.cocci \ --macro-file scripts/cocci-macro-file.h \ --in-place --no-show-diff --max-width 80 Reported-by: Kevin Wolf <kwolf@redhat.com> Reported-by: Greg Kurz <groug@kaod.org> Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> [Commit message tweaked] Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20200707165037.1026246-9-armbru@redhat.com> [ERRP_AUTO_PROPAGATE() renamed to ERRP_GUARD(), and auto-propagated-errp.cocci to errp-guard.cocci. Commit message tweaked again.]
2020-07-07 18:50:37 +02:00
ERRP_GUARD();
XenBlockDevice *blockdev = XEN_BLOCK_DEVICE(xendev);
XenBlockDeviceClass *blockdev_class =
XEN_BLOCK_DEVICE_GET_CLASS(xendev);
const char *type = object_get_typename(OBJECT(blockdev));
XenBlockVdev *vdev = &blockdev->props.vdev;
BlockConf *conf = &blockdev->props.conf;
BlockBackend *blk = conf->blk;
if (vdev->type == XEN_BLOCK_VDEV_TYPE_INVALID) {
error_setg(errp, "vdev property not set");
return;
}
trace_xen_block_realize(type, vdev->disk, vdev->partition);
if (blockdev_class->realize) {
xen: Use ERRP_GUARD() If we want to check error after errp-function call, we need to introduce local_err and then propagate it to errp. Instead, use the ERRP_GUARD() macro, benefits are: 1. No need of explicit error_propagate call 2. No need of explicit local_err variable: use errp directly 3. ERRP_GUARD() leaves errp as is if it's not NULL or &error_fatal, this means that we don't break error_abort (we'll abort on error_set, not on error_propagate) If we want to add some info to errp (by error_prepend() or error_append_hint()), we must use the ERRP_GUARD() macro. Otherwise, this info will not be added when errp == &error_fatal (the program will exit prior to the error_append_hint() or error_prepend() call). No such cases are being fixed here. This commit is generated by command sed -n '/^X86 Xen CPUs$/,/^$/{s/^F: //p}' MAINTAINERS | \ xargs git ls-files | grep '\.[hc]$' | \ xargs spatch \ --sp-file scripts/coccinelle/errp-guard.cocci \ --macro-file scripts/cocci-macro-file.h \ --in-place --no-show-diff --max-width 80 Reported-by: Kevin Wolf <kwolf@redhat.com> Reported-by: Greg Kurz <groug@kaod.org> Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> [Commit message tweaked] Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20200707165037.1026246-9-armbru@redhat.com> [ERRP_AUTO_PROPAGATE() renamed to ERRP_GUARD(), and auto-propagated-errp.cocci to errp-guard.cocci. Commit message tweaked again.]
2020-07-07 18:50:37 +02:00
blockdev_class->realize(blockdev, errp);
if (*errp) {
return;
}
}
/*
* The blkif protocol does not deal with removable media, so it must
* always be present, even for CDRom devices.
*/
assert(blk);
if (!blk_is_inserted(blk)) {
error_setg(errp, "device needs media, but drive is empty");
return;
}
if (!blkconf_apply_backend_options(conf, blockdev->info & VDISK_READONLY,
true, errp)) {
return;
}
if (!(blockdev->info & VDISK_CDROM) &&
!blkconf_geometry(conf, NULL, 65535, 255, 255, errp)) {
return;
}
if (!blkconf_blocksizes(conf, errp)) {
return;
}
if (conf->discard_granularity == -1) {
conf->discard_granularity = conf->physical_block_size;
}
if (blk_get_flags(blk) & BDRV_O_UNMAP) {
xen_device_backend_printf(xendev, "feature-discard", "%u", 1);
xen_device_backend_printf(xendev, "discard-granularity", "%u",
conf->discard_granularity);
xen_device_backend_printf(xendev, "discard-alignment", "%u", 0);
}
xen_device_backend_printf(xendev, "feature-flush-cache", "%u", 1);
if (qemu_xen_gnttab_can_map_multi()) {
xen_device_backend_printf(xendev, "max-ring-page-order", "%u",
blockdev->props.max_ring_page_order);
}
xen_device_backend_printf(xendev, "info", "%u", blockdev->info);
xen_device_frontend_printf(xendev, "virtual-device", "%lu",
vdev->number);
xen_device_frontend_printf(xendev, "device-type", "%s",
blockdev->device_type);
xen_device_backend_printf(xendev, "sector-size", "%u",
conf->logical_block_size);
xen_block_set_size(blockdev);
blockdev->dataplane =
xen_block_dataplane_create(xendev, blk, conf->logical_block_size,
blockdev->props.iothread);
blk_set_dev_ops(blk, &xen_block_dev_ops, blockdev);
}
static void xen_block_frontend_changed(XenDevice *xendev,
enum xenbus_state frontend_state,
Error **errp)
{
xen: Use ERRP_GUARD() If we want to check error after errp-function call, we need to introduce local_err and then propagate it to errp. Instead, use the ERRP_GUARD() macro, benefits are: 1. No need of explicit error_propagate call 2. No need of explicit local_err variable: use errp directly 3. ERRP_GUARD() leaves errp as is if it's not NULL or &error_fatal, this means that we don't break error_abort (we'll abort on error_set, not on error_propagate) If we want to add some info to errp (by error_prepend() or error_append_hint()), we must use the ERRP_GUARD() macro. Otherwise, this info will not be added when errp == &error_fatal (the program will exit prior to the error_append_hint() or error_prepend() call). No such cases are being fixed here. This commit is generated by command sed -n '/^X86 Xen CPUs$/,/^$/{s/^F: //p}' MAINTAINERS | \ xargs git ls-files | grep '\.[hc]$' | \ xargs spatch \ --sp-file scripts/coccinelle/errp-guard.cocci \ --macro-file scripts/cocci-macro-file.h \ --in-place --no-show-diff --max-width 80 Reported-by: Kevin Wolf <kwolf@redhat.com> Reported-by: Greg Kurz <groug@kaod.org> Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> [Commit message tweaked] Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20200707165037.1026246-9-armbru@redhat.com> [ERRP_AUTO_PROPAGATE() renamed to ERRP_GUARD(), and auto-propagated-errp.cocci to errp-guard.cocci. Commit message tweaked again.]
2020-07-07 18:50:37 +02:00
ERRP_GUARD();
enum xenbus_state backend_state = xen_device_backend_get_state(xendev);
switch (frontend_state) {
case XenbusStateInitialised:
case XenbusStateConnected:
if (backend_state == XenbusStateConnected) {
break;
}
xen: Use ERRP_GUARD() If we want to check error after errp-function call, we need to introduce local_err and then propagate it to errp. Instead, use the ERRP_GUARD() macro, benefits are: 1. No need of explicit error_propagate call 2. No need of explicit local_err variable: use errp directly 3. ERRP_GUARD() leaves errp as is if it's not NULL or &error_fatal, this means that we don't break error_abort (we'll abort on error_set, not on error_propagate) If we want to add some info to errp (by error_prepend() or error_append_hint()), we must use the ERRP_GUARD() macro. Otherwise, this info will not be added when errp == &error_fatal (the program will exit prior to the error_append_hint() or error_prepend() call). No such cases are being fixed here. This commit is generated by command sed -n '/^X86 Xen CPUs$/,/^$/{s/^F: //p}' MAINTAINERS | \ xargs git ls-files | grep '\.[hc]$' | \ xargs spatch \ --sp-file scripts/coccinelle/errp-guard.cocci \ --macro-file scripts/cocci-macro-file.h \ --in-place --no-show-diff --max-width 80 Reported-by: Kevin Wolf <kwolf@redhat.com> Reported-by: Greg Kurz <groug@kaod.org> Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> [Commit message tweaked] Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20200707165037.1026246-9-armbru@redhat.com> [ERRP_AUTO_PROPAGATE() renamed to ERRP_GUARD(), and auto-propagated-errp.cocci to errp-guard.cocci. Commit message tweaked again.]
2020-07-07 18:50:37 +02:00
xen_block_disconnect(xendev, errp);
if (*errp) {
break;
}
xen: Use ERRP_GUARD() If we want to check error after errp-function call, we need to introduce local_err and then propagate it to errp. Instead, use the ERRP_GUARD() macro, benefits are: 1. No need of explicit error_propagate call 2. No need of explicit local_err variable: use errp directly 3. ERRP_GUARD() leaves errp as is if it's not NULL or &error_fatal, this means that we don't break error_abort (we'll abort on error_set, not on error_propagate) If we want to add some info to errp (by error_prepend() or error_append_hint()), we must use the ERRP_GUARD() macro. Otherwise, this info will not be added when errp == &error_fatal (the program will exit prior to the error_append_hint() or error_prepend() call). No such cases are being fixed here. This commit is generated by command sed -n '/^X86 Xen CPUs$/,/^$/{s/^F: //p}' MAINTAINERS | \ xargs git ls-files | grep '\.[hc]$' | \ xargs spatch \ --sp-file scripts/coccinelle/errp-guard.cocci \ --macro-file scripts/cocci-macro-file.h \ --in-place --no-show-diff --max-width 80 Reported-by: Kevin Wolf <kwolf@redhat.com> Reported-by: Greg Kurz <groug@kaod.org> Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> [Commit message tweaked] Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20200707165037.1026246-9-armbru@redhat.com> [ERRP_AUTO_PROPAGATE() renamed to ERRP_GUARD(), and auto-propagated-errp.cocci to errp-guard.cocci. Commit message tweaked again.]
2020-07-07 18:50:37 +02:00
xen_block_connect(xendev, errp);
if (*errp) {
break;
}
xen_device_backend_set_state(xendev, XenbusStateConnected);
break;
case XenbusStateClosing:
xen_device_backend_set_state(xendev, XenbusStateClosing);
break;
case XenbusStateClosed:
case XenbusStateUnknown:
xen: Use ERRP_GUARD() If we want to check error after errp-function call, we need to introduce local_err and then propagate it to errp. Instead, use the ERRP_GUARD() macro, benefits are: 1. No need of explicit error_propagate call 2. No need of explicit local_err variable: use errp directly 3. ERRP_GUARD() leaves errp as is if it's not NULL or &error_fatal, this means that we don't break error_abort (we'll abort on error_set, not on error_propagate) If we want to add some info to errp (by error_prepend() or error_append_hint()), we must use the ERRP_GUARD() macro. Otherwise, this info will not be added when errp == &error_fatal (the program will exit prior to the error_append_hint() or error_prepend() call). No such cases are being fixed here. This commit is generated by command sed -n '/^X86 Xen CPUs$/,/^$/{s/^F: //p}' MAINTAINERS | \ xargs git ls-files | grep '\.[hc]$' | \ xargs spatch \ --sp-file scripts/coccinelle/errp-guard.cocci \ --macro-file scripts/cocci-macro-file.h \ --in-place --no-show-diff --max-width 80 Reported-by: Kevin Wolf <kwolf@redhat.com> Reported-by: Greg Kurz <groug@kaod.org> Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> [Commit message tweaked] Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20200707165037.1026246-9-armbru@redhat.com> [ERRP_AUTO_PROPAGATE() renamed to ERRP_GUARD(), and auto-propagated-errp.cocci to errp-guard.cocci. Commit message tweaked again.]
2020-07-07 18:50:37 +02:00
xen_block_disconnect(xendev, errp);
if (*errp) {
break;
}
xen_device_backend_set_state(xendev, XenbusStateClosed);
break;
default:
break;
}
}
static char *disk_to_vbd_name(unsigned int disk)
{
char *name, *prefix = (disk >= 26) ?
disk_to_vbd_name((disk / 26) - 1) : g_strdup("");
name = g_strdup_printf("%s%c", prefix, 'a' + disk % 26);
g_free(prefix);
return name;
}
static void xen_block_get_vdev(Object *obj, Visitor *v, const char *name,
void *opaque, Error **errp)
{
Property *prop = opaque;
XenBlockVdev *vdev = object_field_prop_ptr(obj, prop);
char *str;
switch (vdev->type) {
case XEN_BLOCK_VDEV_TYPE_DP:
str = g_strdup_printf("d%lup%lu", vdev->disk, vdev->partition);
break;
case XEN_BLOCK_VDEV_TYPE_XVD:
case XEN_BLOCK_VDEV_TYPE_HD:
case XEN_BLOCK_VDEV_TYPE_SD: {
char *vbd_name = disk_to_vbd_name(vdev->disk);
str = g_strdup_printf("%s%s%lu",
(vdev->type == XEN_BLOCK_VDEV_TYPE_XVD) ?
"xvd" :
(vdev->type == XEN_BLOCK_VDEV_TYPE_HD) ?
"hd" :
"sd",
vbd_name, vdev->partition);
g_free(vbd_name);
break;
}
default:
error_setg(errp, "invalid vdev type");
return;
}
visit_type_str(v, name, &str, errp);
g_free(str);
}
static int vbd_name_to_disk(const char *name, const char **endp,
unsigned long *disk)
{
unsigned int n = 0;
while (*name != '\0') {
if (!g_ascii_isalpha(*name) || !g_ascii_islower(*name)) {
break;
}
n *= 26;
n += *name++ - 'a' + 1;
}
*endp = name;
if (!n) {
return -1;
}
*disk = n - 1;
return 0;
}
static void xen_block_set_vdev(Object *obj, Visitor *v, const char *name,
void *opaque, Error **errp)
{
Property *prop = opaque;
XenBlockVdev *vdev = object_field_prop_ptr(obj, prop);
char *str, *p;
const char *end;
error: Eliminate error_propagate() with Coccinelle, part 1 When all we do with an Error we receive into a local variable is propagating to somewhere else, we can just as well receive it there right away. Convert if (!foo(..., &err)) { ... error_propagate(errp, err); ... return ... } to if (!foo(..., errp)) { ... ... return ... } where nothing else needs @err. Coccinelle script: @rule1 forall@ identifier fun, err, errp, lbl; expression list args, args2; binary operator op; constant c1, c2; symbol false; @@ if ( ( - fun(args, &err, args2) + fun(args, errp, args2) | - !fun(args, &err, args2) + !fun(args, errp, args2) | - fun(args, &err, args2) op c1 + fun(args, errp, args2) op c1 ) ) { ... when != err when != lbl: when strict - error_propagate(errp, err); ... when != err ( return; | return c2; | return false; ) } @rule2 forall@ identifier fun, err, errp, lbl; expression list args, args2; expression var; binary operator op; constant c1, c2; symbol false; @@ - var = fun(args, &err, args2); + var = fun(args, errp, args2); ... when != err if ( ( var | !var | var op c1 ) ) { ... when != err when != lbl: when strict - error_propagate(errp, err); ... when != err ( return; | return c2; | return false; | return var; ) } @depends on rule1 || rule2@ identifier err; @@ - Error *err = NULL; ... when != err Not exactly elegant, I'm afraid. The "when != lbl:" is necessary to avoid transforming if (fun(args, &err)) { goto out } ... out: error_propagate(errp, err); even though other paths to label out still need the error_propagate(). For an actual example, see sclp_realize(). Without the "when strict", Coccinelle transforms vfio_msix_setup(), incorrectly. I don't know what exactly "when strict" does, only that it helps here. The match of return is narrower than what I want, but I can't figure out how to express "return where the operand doesn't use @err". For an example where it's too narrow, see vfio_intx_enable(). Silently fails to convert hw/arm/armsse.c, because Coccinelle gets confused by ARMSSE being used both as typedef and function-like macro there. Converted manually. Line breaks tidied up manually. One nested declaration of @local_err deleted manually. Preexisting unwanted blank line dropped in hw/riscv/sifive_e.c. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-Id: <20200707160613.848843-35-armbru@redhat.com>
2020-07-07 18:06:02 +02:00
if (!visit_type_str(v, name, &str, errp)) {
return;
}
p = strchr(str, 'd');
if (!p) {
goto invalid;
}
*p++ = '\0';
if (*str == '\0') {
vdev->type = XEN_BLOCK_VDEV_TYPE_DP;
} else if (strcmp(str, "xv") == 0) {
vdev->type = XEN_BLOCK_VDEV_TYPE_XVD;
} else if (strcmp(str, "h") == 0) {
vdev->type = XEN_BLOCK_VDEV_TYPE_HD;
} else if (strcmp(str, "s") == 0) {
vdev->type = XEN_BLOCK_VDEV_TYPE_SD;
} else {
goto invalid;
}
if (vdev->type == XEN_BLOCK_VDEV_TYPE_DP) {
if (qemu_strtoul(p, &end, 10, &vdev->disk)) {
goto invalid;
}
if (*end == 'p') {
if (*(++end) == '\0') {
goto invalid;
}
}
} else {
if (vbd_name_to_disk(p, &end, &vdev->disk)) {
goto invalid;
}
}
if (*end != '\0') {
p = (char *)end;
if (qemu_strtoul(p, &end, 10, &vdev->partition)) {
goto invalid;
}
if (*end != '\0') {
goto invalid;
}
} else {
vdev->partition = 0;
}
switch (vdev->type) {
case XEN_BLOCK_VDEV_TYPE_DP:
case XEN_BLOCK_VDEV_TYPE_XVD:
if (vdev->disk < (1 << 4) && vdev->partition < (1 << 4)) {
vdev->number = (XVDA_MAJOR << 8) | (vdev->disk << 4) |
vdev->partition;
} else if (vdev->disk < (1 << 20) && vdev->partition < (1 << 8)) {
vdev->number = (XVDQ_MAJOR << 8) | (vdev->disk << 8) |
vdev->partition;
} else {
goto invalid;
}
break;
case XEN_BLOCK_VDEV_TYPE_HD:
if ((vdev->disk == 0 || vdev->disk == 1) &&
vdev->partition < (1 << 6)) {
vdev->number = (HDA_MAJOR << 8) | (vdev->disk << 6) |
vdev->partition;
} else if ((vdev->disk == 2 || vdev->disk == 3) &&
vdev->partition < (1 << 6)) {
vdev->number = (HDC_MAJOR << 8) | ((vdev->disk - 2) << 6) |
vdev->partition;
} else {
goto invalid;
}
break;
case XEN_BLOCK_VDEV_TYPE_SD:
if (vdev->disk < (1 << 4) && vdev->partition < (1 << 4)) {
vdev->number = (SDA_MAJOR << 8) | (vdev->disk << 4) |
vdev->partition;
} else {
goto invalid;
}
break;
default:
goto invalid;
}
g_free(str);
return;
invalid:
error_setg(errp, "invalid virtual disk specifier");
vdev->type = XEN_BLOCK_VDEV_TYPE_INVALID;
g_free(str);
}
/*
* This property deals with 'vdev' names adhering to the Xen VBD naming
* scheme described in:
*
* https://xenbits.xen.org/docs/unstable/man/xen-vbd-interface.7.html
*/
const PropertyInfo xen_block_prop_vdev = {
.name = "str",
.description = "Virtual Disk specifier: d*p*/xvd*/hd*/sd*",
.get = xen_block_get_vdev,
.set = xen_block_set_vdev,
};
static Property xen_block_props[] = {
DEFINE_PROP("vdev", XenBlockDevice, props.vdev,
xen_block_prop_vdev, XenBlockVdev),
DEFINE_BLOCK_PROPERTIES(XenBlockDevice, props.conf),
DEFINE_PROP_UINT32("max-ring-page-order", XenBlockDevice,
props.max_ring_page_order, 4),
DEFINE_PROP_LINK("iothread", XenBlockDevice, props.iothread,
TYPE_IOTHREAD, IOThread *),
DEFINE_PROP_END_OF_LIST()
};
static void xen_block_class_init(ObjectClass *class, void *data)
{
DeviceClass *dev_class = DEVICE_CLASS(class);
XenDeviceClass *xendev_class = XEN_DEVICE_CLASS(class);
xendev_class->backend = "qdisk";
xendev_class->device = "vbd";
xendev_class->get_name = xen_block_get_name;
xendev_class->realize = xen_block_realize;
xendev_class->frontend_changed = xen_block_frontend_changed;
xendev_class->unrealize = xen_block_unrealize;
device_class_set_props(dev_class, xen_block_props);
}
static const TypeInfo xen_block_type_info = {
.name = TYPE_XEN_BLOCK_DEVICE,
.parent = TYPE_XEN_DEVICE,
.instance_size = sizeof(XenBlockDevice),
.abstract = true,
.class_size = sizeof(XenBlockDeviceClass),
.class_init = xen_block_class_init,
};
qdev: Unrealize must not fail Devices may have component devices and buses. Device realization may fail. Realization is recursive: a device's realize() method realizes its components, and device_set_realized() realizes its buses (which should in turn realize the devices on that bus, except bus_set_realized() doesn't implement that, yet). When realization of a component or bus fails, we need to roll back: unrealize everything we realized so far. If any of these unrealizes failed, the device would be left in an inconsistent state. Must not happen. device_set_realized() lets it happen: it ignores errors in the roll back code starting at label child_realize_fail. Since realization is recursive, unrealization must be recursive, too. But how could a partly failed unrealize be rolled back? We'd have to re-realize, which can fail. This design is fundamentally broken. device_set_realized() does not roll back at all. Instead, it keeps unrealizing, ignoring further errors. It can screw up even for a device with no buses: if the lone dc->unrealize() fails, it still unregisters vmstate, and calls listeners' unrealize() callback. bus_set_realized() does not roll back either. Instead, it stops unrealizing. Fortunately, no unrealize method can fail, as we'll see below. To fix the design error, drop parameter @errp from all the unrealize methods. Any unrealize method that uses @errp now needs an update. This leads us to unrealize() methods that can fail. Merely passing it to another unrealize method cannot cause failure, though. Here are the ones that do other things with @errp: * virtio_serial_device_unrealize() Fails when qbus_set_hotplug_handler() fails, but still does all the other work. On failure, the device would stay realized with its resources completely gone. Oops. Can't happen, because qbus_set_hotplug_handler() can't actually fail here. Pass &error_abort to qbus_set_hotplug_handler() instead. * hw/ppc/spapr_drc.c's unrealize() Fails when object_property_del() fails, but all the other work is already done. On failure, the device would stay realized with its vmstate registration gone. Oops. Can't happen, because object_property_del() can't actually fail here. Pass &error_abort to object_property_del() instead. * spapr_phb_unrealize() Fails and bails out when remove_drcs() fails, but other work is already done. On failure, the device would stay realized with some of its resources gone. Oops. remove_drcs() fails only when chassis_from_bus()'s object_property_get_uint() fails, and it can't here. Pass &error_abort to remove_drcs() instead. Therefore, no unrealize method can fail before this patch. device_set_realized()'s recursive unrealization via bus uses object_property_set_bool(). Can't drop @errp there, so pass &error_abort. We similarly unrealize with object_property_set_bool() elsewhere, always ignoring errors. Pass &error_abort instead. Several unrealize methods no longer handle errors from other unrealize methods: virtio_9p_device_unrealize(), virtio_input_device_unrealize(), scsi_qdev_unrealize(), ... Much of the deleted error handling looks wrong anyway. One unrealize methods no longer ignore such errors: usb_ehci_pci_exit(). Several realize methods no longer ignore errors when rolling back: v9fs_device_realize_common(), pci_qdev_unrealize(), spapr_phb_realize(), usb_qdev_realize(), vfio_ccw_realize(), virtio_device_realize(). Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20200505152926.18877-17-armbru@redhat.com>
2020-05-05 17:29:24 +02:00
static void xen_disk_unrealize(XenBlockDevice *blockdev)
{
trace_xen_disk_unrealize();
}
static void xen_disk_realize(XenBlockDevice *blockdev, Error **errp)
{
BlockConf *conf = &blockdev->props.conf;
trace_xen_disk_realize();
blockdev->device_type = "disk";
if (!conf->blk) {
error_setg(errp, "drive property not set");
return;
}
blockdev->info = blk_supports_write_perm(conf->blk) ? 0 : VDISK_READONLY;
}
static void xen_disk_class_init(ObjectClass *class, void *data)
{
DeviceClass *dev_class = DEVICE_CLASS(class);
XenBlockDeviceClass *blockdev_class = XEN_BLOCK_DEVICE_CLASS(class);
blockdev_class->realize = xen_disk_realize;
blockdev_class->unrealize = xen_disk_unrealize;
dev_class->desc = "Xen Disk Device";
}
static const TypeInfo xen_disk_type_info = {
.name = TYPE_XEN_DISK_DEVICE,
.parent = TYPE_XEN_BLOCK_DEVICE,
.instance_size = sizeof(XenDiskDevice),
.class_init = xen_disk_class_init,
};
qdev: Unrealize must not fail Devices may have component devices and buses. Device realization may fail. Realization is recursive: a device's realize() method realizes its components, and device_set_realized() realizes its buses (which should in turn realize the devices on that bus, except bus_set_realized() doesn't implement that, yet). When realization of a component or bus fails, we need to roll back: unrealize everything we realized so far. If any of these unrealizes failed, the device would be left in an inconsistent state. Must not happen. device_set_realized() lets it happen: it ignores errors in the roll back code starting at label child_realize_fail. Since realization is recursive, unrealization must be recursive, too. But how could a partly failed unrealize be rolled back? We'd have to re-realize, which can fail. This design is fundamentally broken. device_set_realized() does not roll back at all. Instead, it keeps unrealizing, ignoring further errors. It can screw up even for a device with no buses: if the lone dc->unrealize() fails, it still unregisters vmstate, and calls listeners' unrealize() callback. bus_set_realized() does not roll back either. Instead, it stops unrealizing. Fortunately, no unrealize method can fail, as we'll see below. To fix the design error, drop parameter @errp from all the unrealize methods. Any unrealize method that uses @errp now needs an update. This leads us to unrealize() methods that can fail. Merely passing it to another unrealize method cannot cause failure, though. Here are the ones that do other things with @errp: * virtio_serial_device_unrealize() Fails when qbus_set_hotplug_handler() fails, but still does all the other work. On failure, the device would stay realized with its resources completely gone. Oops. Can't happen, because qbus_set_hotplug_handler() can't actually fail here. Pass &error_abort to qbus_set_hotplug_handler() instead. * hw/ppc/spapr_drc.c's unrealize() Fails when object_property_del() fails, but all the other work is already done. On failure, the device would stay realized with its vmstate registration gone. Oops. Can't happen, because object_property_del() can't actually fail here. Pass &error_abort to object_property_del() instead. * spapr_phb_unrealize() Fails and bails out when remove_drcs() fails, but other work is already done. On failure, the device would stay realized with some of its resources gone. Oops. remove_drcs() fails only when chassis_from_bus()'s object_property_get_uint() fails, and it can't here. Pass &error_abort to remove_drcs() instead. Therefore, no unrealize method can fail before this patch. device_set_realized()'s recursive unrealization via bus uses object_property_set_bool(). Can't drop @errp there, so pass &error_abort. We similarly unrealize with object_property_set_bool() elsewhere, always ignoring errors. Pass &error_abort instead. Several unrealize methods no longer handle errors from other unrealize methods: virtio_9p_device_unrealize(), virtio_input_device_unrealize(), scsi_qdev_unrealize(), ... Much of the deleted error handling looks wrong anyway. One unrealize methods no longer ignore such errors: usb_ehci_pci_exit(). Several realize methods no longer ignore errors when rolling back: v9fs_device_realize_common(), pci_qdev_unrealize(), spapr_phb_realize(), usb_qdev_realize(), vfio_ccw_realize(), virtio_device_realize(). Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20200505152926.18877-17-armbru@redhat.com>
2020-05-05 17:29:24 +02:00
static void xen_cdrom_unrealize(XenBlockDevice *blockdev)
{
trace_xen_cdrom_unrealize();
}
static void xen_cdrom_realize(XenBlockDevice *blockdev, Error **errp)
{
BlockConf *conf = &blockdev->props.conf;
trace_xen_cdrom_realize();
blockdev->device_type = "cdrom";
if (!conf->blk) {
int rc;
/* Set up an empty drive */
conf->blk = blk_new(qemu_get_aio_context(), 0, BLK_PERM_ALL);
rc = blk_attach_dev(conf->blk, DEVICE(blockdev));
if (!rc) {
error_setg_errno(errp, -rc, "failed to create drive");
return;
}
}
blockdev->info = VDISK_READONLY | VDISK_CDROM;
}
static void xen_cdrom_class_init(ObjectClass *class, void *data)
{
DeviceClass *dev_class = DEVICE_CLASS(class);
XenBlockDeviceClass *blockdev_class = XEN_BLOCK_DEVICE_CLASS(class);
blockdev_class->realize = xen_cdrom_realize;
blockdev_class->unrealize = xen_cdrom_unrealize;
dev_class->desc = "Xen CD-ROM Device";
}
static const TypeInfo xen_cdrom_type_info = {
.name = TYPE_XEN_CDROM_DEVICE,
.parent = TYPE_XEN_BLOCK_DEVICE,
.instance_size = sizeof(XenCDRomDevice),
.class_init = xen_cdrom_class_init,
};
static void xen_block_register_types(void)
{
type_register_static(&xen_block_type_info);
type_register_static(&xen_disk_type_info);
type_register_static(&xen_cdrom_type_info);
}
type_init(xen_block_register_types)
static void xen_block_blockdev_del(const char *node_name, Error **errp)
{
trace_xen_block_blockdev_del(node_name);
qmp_blockdev_del(node_name, errp);
}
static char *xen_block_blockdev_add(const char *id, QDict *qdict,
Error **errp)
{
xen: Use ERRP_GUARD() If we want to check error after errp-function call, we need to introduce local_err and then propagate it to errp. Instead, use the ERRP_GUARD() macro, benefits are: 1. No need of explicit error_propagate call 2. No need of explicit local_err variable: use errp directly 3. ERRP_GUARD() leaves errp as is if it's not NULL or &error_fatal, this means that we don't break error_abort (we'll abort on error_set, not on error_propagate) If we want to add some info to errp (by error_prepend() or error_append_hint()), we must use the ERRP_GUARD() macro. Otherwise, this info will not be added when errp == &error_fatal (the program will exit prior to the error_append_hint() or error_prepend() call). No such cases are being fixed here. This commit is generated by command sed -n '/^X86 Xen CPUs$/,/^$/{s/^F: //p}' MAINTAINERS | \ xargs git ls-files | grep '\.[hc]$' | \ xargs spatch \ --sp-file scripts/coccinelle/errp-guard.cocci \ --macro-file scripts/cocci-macro-file.h \ --in-place --no-show-diff --max-width 80 Reported-by: Kevin Wolf <kwolf@redhat.com> Reported-by: Greg Kurz <groug@kaod.org> Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> [Commit message tweaked] Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20200707165037.1026246-9-armbru@redhat.com> [ERRP_AUTO_PROPAGATE() renamed to ERRP_GUARD(), and auto-propagated-errp.cocci to errp-guard.cocci. Commit message tweaked again.]
2020-07-07 18:50:37 +02:00
ERRP_GUARD();
const char *driver = qdict_get_try_str(qdict, "driver");
BlockdevOptions *options = NULL;
char *node_name;
Visitor *v;
if (!driver) {
error_setg(errp, "no 'driver' parameter");
return NULL;
}
node_name = g_strdup_printf("%s-%s", id, driver);
qdict_put_str(qdict, "node-name", node_name);
trace_xen_block_blockdev_add(node_name);
v = qobject_input_visitor_new(QOBJECT(qdict));
visit_type_BlockdevOptions(v, NULL, &options, errp);
visit_free(v);
if (!options) {
goto fail;
}
xen: Use ERRP_GUARD() If we want to check error after errp-function call, we need to introduce local_err and then propagate it to errp. Instead, use the ERRP_GUARD() macro, benefits are: 1. No need of explicit error_propagate call 2. No need of explicit local_err variable: use errp directly 3. ERRP_GUARD() leaves errp as is if it's not NULL or &error_fatal, this means that we don't break error_abort (we'll abort on error_set, not on error_propagate) If we want to add some info to errp (by error_prepend() or error_append_hint()), we must use the ERRP_GUARD() macro. Otherwise, this info will not be added when errp == &error_fatal (the program will exit prior to the error_append_hint() or error_prepend() call). No such cases are being fixed here. This commit is generated by command sed -n '/^X86 Xen CPUs$/,/^$/{s/^F: //p}' MAINTAINERS | \ xargs git ls-files | grep '\.[hc]$' | \ xargs spatch \ --sp-file scripts/coccinelle/errp-guard.cocci \ --macro-file scripts/cocci-macro-file.h \ --in-place --no-show-diff --max-width 80 Reported-by: Kevin Wolf <kwolf@redhat.com> Reported-by: Greg Kurz <groug@kaod.org> Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> [Commit message tweaked] Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20200707165037.1026246-9-armbru@redhat.com> [ERRP_AUTO_PROPAGATE() renamed to ERRP_GUARD(), and auto-propagated-errp.cocci to errp-guard.cocci. Commit message tweaked again.]
2020-07-07 18:50:37 +02:00
qmp_blockdev_add(options, errp);
xen: Use ERRP_GUARD() If we want to check error after errp-function call, we need to introduce local_err and then propagate it to errp. Instead, use the ERRP_GUARD() macro, benefits are: 1. No need of explicit error_propagate call 2. No need of explicit local_err variable: use errp directly 3. ERRP_GUARD() leaves errp as is if it's not NULL or &error_fatal, this means that we don't break error_abort (we'll abort on error_set, not on error_propagate) If we want to add some info to errp (by error_prepend() or error_append_hint()), we must use the ERRP_GUARD() macro. Otherwise, this info will not be added when errp == &error_fatal (the program will exit prior to the error_append_hint() or error_prepend() call). No such cases are being fixed here. This commit is generated by command sed -n '/^X86 Xen CPUs$/,/^$/{s/^F: //p}' MAINTAINERS | \ xargs git ls-files | grep '\.[hc]$' | \ xargs spatch \ --sp-file scripts/coccinelle/errp-guard.cocci \ --macro-file scripts/cocci-macro-file.h \ --in-place --no-show-diff --max-width 80 Reported-by: Kevin Wolf <kwolf@redhat.com> Reported-by: Greg Kurz <groug@kaod.org> Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> [Commit message tweaked] Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20200707165037.1026246-9-armbru@redhat.com> [ERRP_AUTO_PROPAGATE() renamed to ERRP_GUARD(), and auto-propagated-errp.cocci to errp-guard.cocci. Commit message tweaked again.]
2020-07-07 18:50:37 +02:00
if (*errp) {
goto fail;
}
qapi_free_BlockdevOptions(options);
return node_name;
fail:
if (options) {
qapi_free_BlockdevOptions(options);
}
g_free(node_name);
return NULL;
}
static void xen_block_drive_destroy(XenBlockDrive *drive, Error **errp)
{
xen: Use ERRP_GUARD() If we want to check error after errp-function call, we need to introduce local_err and then propagate it to errp. Instead, use the ERRP_GUARD() macro, benefits are: 1. No need of explicit error_propagate call 2. No need of explicit local_err variable: use errp directly 3. ERRP_GUARD() leaves errp as is if it's not NULL or &error_fatal, this means that we don't break error_abort (we'll abort on error_set, not on error_propagate) If we want to add some info to errp (by error_prepend() or error_append_hint()), we must use the ERRP_GUARD() macro. Otherwise, this info will not be added when errp == &error_fatal (the program will exit prior to the error_append_hint() or error_prepend() call). No such cases are being fixed here. This commit is generated by command sed -n '/^X86 Xen CPUs$/,/^$/{s/^F: //p}' MAINTAINERS | \ xargs git ls-files | grep '\.[hc]$' | \ xargs spatch \ --sp-file scripts/coccinelle/errp-guard.cocci \ --macro-file scripts/cocci-macro-file.h \ --in-place --no-show-diff --max-width 80 Reported-by: Kevin Wolf <kwolf@redhat.com> Reported-by: Greg Kurz <groug@kaod.org> Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> [Commit message tweaked] Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20200707165037.1026246-9-armbru@redhat.com> [ERRP_AUTO_PROPAGATE() renamed to ERRP_GUARD(), and auto-propagated-errp.cocci to errp-guard.cocci. Commit message tweaked again.]
2020-07-07 18:50:37 +02:00
ERRP_GUARD();
char *node_name = drive->node_name;
if (node_name) {
xen: Use ERRP_GUARD() If we want to check error after errp-function call, we need to introduce local_err and then propagate it to errp. Instead, use the ERRP_GUARD() macro, benefits are: 1. No need of explicit error_propagate call 2. No need of explicit local_err variable: use errp directly 3. ERRP_GUARD() leaves errp as is if it's not NULL or &error_fatal, this means that we don't break error_abort (we'll abort on error_set, not on error_propagate) If we want to add some info to errp (by error_prepend() or error_append_hint()), we must use the ERRP_GUARD() macro. Otherwise, this info will not be added when errp == &error_fatal (the program will exit prior to the error_append_hint() or error_prepend() call). No such cases are being fixed here. This commit is generated by command sed -n '/^X86 Xen CPUs$/,/^$/{s/^F: //p}' MAINTAINERS | \ xargs git ls-files | grep '\.[hc]$' | \ xargs spatch \ --sp-file scripts/coccinelle/errp-guard.cocci \ --macro-file scripts/cocci-macro-file.h \ --in-place --no-show-diff --max-width 80 Reported-by: Kevin Wolf <kwolf@redhat.com> Reported-by: Greg Kurz <groug@kaod.org> Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> [Commit message tweaked] Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20200707165037.1026246-9-armbru@redhat.com> [ERRP_AUTO_PROPAGATE() renamed to ERRP_GUARD(), and auto-propagated-errp.cocci to errp-guard.cocci. Commit message tweaked again.]
2020-07-07 18:50:37 +02:00
xen_block_blockdev_del(node_name, errp);
if (*errp) {
return;
}
g_free(node_name);
drive->node_name = NULL;
}
g_free(drive->id);
g_free(drive);
}
static XenBlockDrive *xen_block_drive_create(const char *id,
const char *device_type,
QDict *opts, Error **errp)
{
xen: Use ERRP_GUARD() If we want to check error after errp-function call, we need to introduce local_err and then propagate it to errp. Instead, use the ERRP_GUARD() macro, benefits are: 1. No need of explicit error_propagate call 2. No need of explicit local_err variable: use errp directly 3. ERRP_GUARD() leaves errp as is if it's not NULL or &error_fatal, this means that we don't break error_abort (we'll abort on error_set, not on error_propagate) If we want to add some info to errp (by error_prepend() or error_append_hint()), we must use the ERRP_GUARD() macro. Otherwise, this info will not be added when errp == &error_fatal (the program will exit prior to the error_append_hint() or error_prepend() call). No such cases are being fixed here. This commit is generated by command sed -n '/^X86 Xen CPUs$/,/^$/{s/^F: //p}' MAINTAINERS | \ xargs git ls-files | grep '\.[hc]$' | \ xargs spatch \ --sp-file scripts/coccinelle/errp-guard.cocci \ --macro-file scripts/cocci-macro-file.h \ --in-place --no-show-diff --max-width 80 Reported-by: Kevin Wolf <kwolf@redhat.com> Reported-by: Greg Kurz <groug@kaod.org> Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> [Commit message tweaked] Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20200707165037.1026246-9-armbru@redhat.com> [ERRP_AUTO_PROPAGATE() renamed to ERRP_GUARD(), and auto-propagated-errp.cocci to errp-guard.cocci. Commit message tweaked again.]
2020-07-07 18:50:37 +02:00
ERRP_GUARD();
const char *params = qdict_get_try_str(opts, "params");
const char *mode = qdict_get_try_str(opts, "mode");
const char *direct_io_safe = qdict_get_try_str(opts, "direct-io-safe");
const char *discard_enable = qdict_get_try_str(opts, "discard-enable");
char *driver = NULL;
char *filename = NULL;
XenBlockDrive *drive = NULL;
QDict *file_layer;
QDict *driver_layer;
struct stat st;
int rc;
if (params) {
char **v = g_strsplit(params, ":", 2);
if (v[1] == NULL) {
filename = g_strdup(v[0]);
driver = g_strdup("raw");
} else {
if (strcmp(v[0], "aio") == 0) {
driver = g_strdup("raw");
} else if (strcmp(v[0], "vhd") == 0) {
driver = g_strdup("vpc");
} else {
driver = g_strdup(v[0]);
}
filename = g_strdup(v[1]);
}
g_strfreev(v);
} else {
error_setg(errp, "no params");
goto done;
}
assert(filename);
assert(driver);
drive = g_new0(XenBlockDrive, 1);
drive->id = g_strdup(id);
rc = stat(filename, &st);
if (rc) {
error_setg_errno(errp, errno, "Could not stat file '%s'", filename);
goto done;
}
file_layer = qdict_new();
driver_layer = qdict_new();
if (S_ISBLK(st.st_mode)) {
qdict_put_str(file_layer, "driver", "host_device");
} else {
qdict_put_str(file_layer, "driver", "file");
}
qdict_put_str(file_layer, "filename", filename);
if (mode && *mode != 'w') {
qdict_put_bool(file_layer, "read-only", true);
}
if (direct_io_safe) {
unsigned long value;
if (!qemu_strtoul(direct_io_safe, NULL, 2, &value) && !!value) {
QDict *cache_qdict = qdict_new();
qdict_put_bool(cache_qdict, "direct", true);
qdict_put(file_layer, "cache", cache_qdict);
qdict_put_str(file_layer, "aio", "native");
}
}
if (discard_enable) {
unsigned long value;
if (!qemu_strtoul(discard_enable, NULL, 2, &value) && !!value) {
qdict_put_str(file_layer, "discard", "unmap");
qdict_put_str(driver_layer, "discard", "unmap");
}
}
/*
* It is necessary to turn file locking off as an emulated device
* may have already opened the same image file.
*/
qdict_put_str(file_layer, "locking", "off");
qdict_put_str(driver_layer, "driver", driver);
qdict_put(driver_layer, "file", file_layer);
g_assert(!drive->node_name);
drive->node_name = xen_block_blockdev_add(drive->id, driver_layer,
xen: Use ERRP_GUARD() If we want to check error after errp-function call, we need to introduce local_err and then propagate it to errp. Instead, use the ERRP_GUARD() macro, benefits are: 1. No need of explicit error_propagate call 2. No need of explicit local_err variable: use errp directly 3. ERRP_GUARD() leaves errp as is if it's not NULL or &error_fatal, this means that we don't break error_abort (we'll abort on error_set, not on error_propagate) If we want to add some info to errp (by error_prepend() or error_append_hint()), we must use the ERRP_GUARD() macro. Otherwise, this info will not be added when errp == &error_fatal (the program will exit prior to the error_append_hint() or error_prepend() call). No such cases are being fixed here. This commit is generated by command sed -n '/^X86 Xen CPUs$/,/^$/{s/^F: //p}' MAINTAINERS | \ xargs git ls-files | grep '\.[hc]$' | \ xargs spatch \ --sp-file scripts/coccinelle/errp-guard.cocci \ --macro-file scripts/cocci-macro-file.h \ --in-place --no-show-diff --max-width 80 Reported-by: Kevin Wolf <kwolf@redhat.com> Reported-by: Greg Kurz <groug@kaod.org> Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> [Commit message tweaked] Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20200707165037.1026246-9-armbru@redhat.com> [ERRP_AUTO_PROPAGATE() renamed to ERRP_GUARD(), and auto-propagated-errp.cocci to errp-guard.cocci. Commit message tweaked again.]
2020-07-07 18:50:37 +02:00
errp);
qobject_unref(driver_layer);
done:
g_free(filename);
g_free(driver);
xen: Use ERRP_GUARD() If we want to check error after errp-function call, we need to introduce local_err and then propagate it to errp. Instead, use the ERRP_GUARD() macro, benefits are: 1. No need of explicit error_propagate call 2. No need of explicit local_err variable: use errp directly 3. ERRP_GUARD() leaves errp as is if it's not NULL or &error_fatal, this means that we don't break error_abort (we'll abort on error_set, not on error_propagate) If we want to add some info to errp (by error_prepend() or error_append_hint()), we must use the ERRP_GUARD() macro. Otherwise, this info will not be added when errp == &error_fatal (the program will exit prior to the error_append_hint() or error_prepend() call). No such cases are being fixed here. This commit is generated by command sed -n '/^X86 Xen CPUs$/,/^$/{s/^F: //p}' MAINTAINERS | \ xargs git ls-files | grep '\.[hc]$' | \ xargs spatch \ --sp-file scripts/coccinelle/errp-guard.cocci \ --macro-file scripts/cocci-macro-file.h \ --in-place --no-show-diff --max-width 80 Reported-by: Kevin Wolf <kwolf@redhat.com> Reported-by: Greg Kurz <groug@kaod.org> Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> [Commit message tweaked] Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20200707165037.1026246-9-armbru@redhat.com> [ERRP_AUTO_PROPAGATE() renamed to ERRP_GUARD(), and auto-propagated-errp.cocci to errp-guard.cocci. Commit message tweaked again.]
2020-07-07 18:50:37 +02:00
if (*errp) {
xen_block_drive_destroy(drive, NULL);
return NULL;
}
return drive;
}
static const char *xen_block_drive_get_node_name(XenBlockDrive *drive)
{
return drive->node_name ? drive->node_name : "";
}
static void xen_block_iothread_destroy(XenBlockIOThread *iothread,
Error **errp)
{
qmp_object_del(iothread->id, errp);
g_free(iothread->id);
g_free(iothread);
}
static XenBlockIOThread *xen_block_iothread_create(const char *id,
Error **errp)
{
xen: Use ERRP_GUARD() If we want to check error after errp-function call, we need to introduce local_err and then propagate it to errp. Instead, use the ERRP_GUARD() macro, benefits are: 1. No need of explicit error_propagate call 2. No need of explicit local_err variable: use errp directly 3. ERRP_GUARD() leaves errp as is if it's not NULL or &error_fatal, this means that we don't break error_abort (we'll abort on error_set, not on error_propagate) If we want to add some info to errp (by error_prepend() or error_append_hint()), we must use the ERRP_GUARD() macro. Otherwise, this info will not be added when errp == &error_fatal (the program will exit prior to the error_append_hint() or error_prepend() call). No such cases are being fixed here. This commit is generated by command sed -n '/^X86 Xen CPUs$/,/^$/{s/^F: //p}' MAINTAINERS | \ xargs git ls-files | grep '\.[hc]$' | \ xargs spatch \ --sp-file scripts/coccinelle/errp-guard.cocci \ --macro-file scripts/cocci-macro-file.h \ --in-place --no-show-diff --max-width 80 Reported-by: Kevin Wolf <kwolf@redhat.com> Reported-by: Greg Kurz <groug@kaod.org> Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> [Commit message tweaked] Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20200707165037.1026246-9-armbru@redhat.com> [ERRP_AUTO_PROPAGATE() renamed to ERRP_GUARD(), and auto-propagated-errp.cocci to errp-guard.cocci. Commit message tweaked again.]
2020-07-07 18:50:37 +02:00
ERRP_GUARD();
XenBlockIOThread *iothread = g_new(XenBlockIOThread, 1);
ObjectOptions *opts;
iothread->id = g_strdup(id);
opts = g_new(ObjectOptions, 1);
*opts = (ObjectOptions) {
.qom_type = OBJECT_TYPE_IOTHREAD,
.id = g_strdup(id),
};
qmp_object_add(opts, errp);
qapi_free_ObjectOptions(opts);
xen: Use ERRP_GUARD() If we want to check error after errp-function call, we need to introduce local_err and then propagate it to errp. Instead, use the ERRP_GUARD() macro, benefits are: 1. No need of explicit error_propagate call 2. No need of explicit local_err variable: use errp directly 3. ERRP_GUARD() leaves errp as is if it's not NULL or &error_fatal, this means that we don't break error_abort (we'll abort on error_set, not on error_propagate) If we want to add some info to errp (by error_prepend() or error_append_hint()), we must use the ERRP_GUARD() macro. Otherwise, this info will not be added when errp == &error_fatal (the program will exit prior to the error_append_hint() or error_prepend() call). No such cases are being fixed here. This commit is generated by command sed -n '/^X86 Xen CPUs$/,/^$/{s/^F: //p}' MAINTAINERS | \ xargs git ls-files | grep '\.[hc]$' | \ xargs spatch \ --sp-file scripts/coccinelle/errp-guard.cocci \ --macro-file scripts/cocci-macro-file.h \ --in-place --no-show-diff --max-width 80 Reported-by: Kevin Wolf <kwolf@redhat.com> Reported-by: Greg Kurz <groug@kaod.org> Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> [Commit message tweaked] Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20200707165037.1026246-9-armbru@redhat.com> [ERRP_AUTO_PROPAGATE() renamed to ERRP_GUARD(), and auto-propagated-errp.cocci to errp-guard.cocci. Commit message tweaked again.]
2020-07-07 18:50:37 +02:00
if (*errp) {
g_free(iothread->id);
g_free(iothread);
return NULL;
}
return iothread;
}
static void xen_block_device_create(XenBackendInstance *backend,
QDict *opts, Error **errp)
{
xen: Use ERRP_GUARD() If we want to check error after errp-function call, we need to introduce local_err and then propagate it to errp. Instead, use the ERRP_GUARD() macro, benefits are: 1. No need of explicit error_propagate call 2. No need of explicit local_err variable: use errp directly 3. ERRP_GUARD() leaves errp as is if it's not NULL or &error_fatal, this means that we don't break error_abort (we'll abort on error_set, not on error_propagate) If we want to add some info to errp (by error_prepend() or error_append_hint()), we must use the ERRP_GUARD() macro. Otherwise, this info will not be added when errp == &error_fatal (the program will exit prior to the error_append_hint() or error_prepend() call). No such cases are being fixed here. This commit is generated by command sed -n '/^X86 Xen CPUs$/,/^$/{s/^F: //p}' MAINTAINERS | \ xargs git ls-files | grep '\.[hc]$' | \ xargs spatch \ --sp-file scripts/coccinelle/errp-guard.cocci \ --macro-file scripts/cocci-macro-file.h \ --in-place --no-show-diff --max-width 80 Reported-by: Kevin Wolf <kwolf@redhat.com> Reported-by: Greg Kurz <groug@kaod.org> Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> [Commit message tweaked] Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20200707165037.1026246-9-armbru@redhat.com> [ERRP_AUTO_PROPAGATE() renamed to ERRP_GUARD(), and auto-propagated-errp.cocci to errp-guard.cocci. Commit message tweaked again.]
2020-07-07 18:50:37 +02:00
ERRP_GUARD();
XenBus *xenbus = xen_backend_get_bus(backend);
const char *name = xen_backend_get_name(backend);
unsigned long number;
const char *vdev, *device_type;
XenBlockDrive *drive = NULL;
XenBlockIOThread *iothread = NULL;
XenDevice *xendev = NULL;
const char *type;
XenBlockDevice *blockdev;
if (qemu_strtoul(name, NULL, 10, &number)) {
error_setg(errp, "failed to parse name '%s'", name);
goto fail;
}
trace_xen_block_device_create(number);
vdev = qdict_get_try_str(opts, "dev");
if (!vdev) {
error_setg(errp, "no dev parameter");
goto fail;
}
device_type = qdict_get_try_str(opts, "device-type");
if (!device_type) {
error_setg(errp, "no device-type parameter");
goto fail;
}
if (!strcmp(device_type, "disk")) {
type = TYPE_XEN_DISK_DEVICE;
} else if (!strcmp(device_type, "cdrom")) {
type = TYPE_XEN_CDROM_DEVICE;
} else {
error_setg(errp, "invalid device-type parameter '%s'", device_type);
goto fail;
}
xen: Use ERRP_GUARD() If we want to check error after errp-function call, we need to introduce local_err and then propagate it to errp. Instead, use the ERRP_GUARD() macro, benefits are: 1. No need of explicit error_propagate call 2. No need of explicit local_err variable: use errp directly 3. ERRP_GUARD() leaves errp as is if it's not NULL or &error_fatal, this means that we don't break error_abort (we'll abort on error_set, not on error_propagate) If we want to add some info to errp (by error_prepend() or error_append_hint()), we must use the ERRP_GUARD() macro. Otherwise, this info will not be added when errp == &error_fatal (the program will exit prior to the error_append_hint() or error_prepend() call). No such cases are being fixed here. This commit is generated by command sed -n '/^X86 Xen CPUs$/,/^$/{s/^F: //p}' MAINTAINERS | \ xargs git ls-files | grep '\.[hc]$' | \ xargs spatch \ --sp-file scripts/coccinelle/errp-guard.cocci \ --macro-file scripts/cocci-macro-file.h \ --in-place --no-show-diff --max-width 80 Reported-by: Kevin Wolf <kwolf@redhat.com> Reported-by: Greg Kurz <groug@kaod.org> Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> [Commit message tweaked] Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20200707165037.1026246-9-armbru@redhat.com> [ERRP_AUTO_PROPAGATE() renamed to ERRP_GUARD(), and auto-propagated-errp.cocci to errp-guard.cocci. Commit message tweaked again.]
2020-07-07 18:50:37 +02:00
drive = xen_block_drive_create(vdev, device_type, opts, errp);
if (!drive) {
xen: Use ERRP_GUARD() If we want to check error after errp-function call, we need to introduce local_err and then propagate it to errp. Instead, use the ERRP_GUARD() macro, benefits are: 1. No need of explicit error_propagate call 2. No need of explicit local_err variable: use errp directly 3. ERRP_GUARD() leaves errp as is if it's not NULL or &error_fatal, this means that we don't break error_abort (we'll abort on error_set, not on error_propagate) If we want to add some info to errp (by error_prepend() or error_append_hint()), we must use the ERRP_GUARD() macro. Otherwise, this info will not be added when errp == &error_fatal (the program will exit prior to the error_append_hint() or error_prepend() call). No such cases are being fixed here. This commit is generated by command sed -n '/^X86 Xen CPUs$/,/^$/{s/^F: //p}' MAINTAINERS | \ xargs git ls-files | grep '\.[hc]$' | \ xargs spatch \ --sp-file scripts/coccinelle/errp-guard.cocci \ --macro-file scripts/cocci-macro-file.h \ --in-place --no-show-diff --max-width 80 Reported-by: Kevin Wolf <kwolf@redhat.com> Reported-by: Greg Kurz <groug@kaod.org> Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> [Commit message tweaked] Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20200707165037.1026246-9-armbru@redhat.com> [ERRP_AUTO_PROPAGATE() renamed to ERRP_GUARD(), and auto-propagated-errp.cocci to errp-guard.cocci. Commit message tweaked again.]
2020-07-07 18:50:37 +02:00
error_prepend(errp, "failed to create drive: ");
goto fail;
}
xen: Use ERRP_GUARD() If we want to check error after errp-function call, we need to introduce local_err and then propagate it to errp. Instead, use the ERRP_GUARD() macro, benefits are: 1. No need of explicit error_propagate call 2. No need of explicit local_err variable: use errp directly 3. ERRP_GUARD() leaves errp as is if it's not NULL or &error_fatal, this means that we don't break error_abort (we'll abort on error_set, not on error_propagate) If we want to add some info to errp (by error_prepend() or error_append_hint()), we must use the ERRP_GUARD() macro. Otherwise, this info will not be added when errp == &error_fatal (the program will exit prior to the error_append_hint() or error_prepend() call). No such cases are being fixed here. This commit is generated by command sed -n '/^X86 Xen CPUs$/,/^$/{s/^F: //p}' MAINTAINERS | \ xargs git ls-files | grep '\.[hc]$' | \ xargs spatch \ --sp-file scripts/coccinelle/errp-guard.cocci \ --macro-file scripts/cocci-macro-file.h \ --in-place --no-show-diff --max-width 80 Reported-by: Kevin Wolf <kwolf@redhat.com> Reported-by: Greg Kurz <groug@kaod.org> Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> [Commit message tweaked] Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20200707165037.1026246-9-armbru@redhat.com> [ERRP_AUTO_PROPAGATE() renamed to ERRP_GUARD(), and auto-propagated-errp.cocci to errp-guard.cocci. Commit message tweaked again.]
2020-07-07 18:50:37 +02:00
iothread = xen_block_iothread_create(vdev, errp);
if (*errp) {
error_prepend(errp, "failed to create iothread: ");
goto fail;
}
xendev = XEN_DEVICE(qdev_new(type));
blockdev = XEN_BLOCK_DEVICE(xendev);
if (!object_property_set_str(OBJECT(xendev), "vdev", vdev,
xen: Use ERRP_GUARD() If we want to check error after errp-function call, we need to introduce local_err and then propagate it to errp. Instead, use the ERRP_GUARD() macro, benefits are: 1. No need of explicit error_propagate call 2. No need of explicit local_err variable: use errp directly 3. ERRP_GUARD() leaves errp as is if it's not NULL or &error_fatal, this means that we don't break error_abort (we'll abort on error_set, not on error_propagate) If we want to add some info to errp (by error_prepend() or error_append_hint()), we must use the ERRP_GUARD() macro. Otherwise, this info will not be added when errp == &error_fatal (the program will exit prior to the error_append_hint() or error_prepend() call). No such cases are being fixed here. This commit is generated by command sed -n '/^X86 Xen CPUs$/,/^$/{s/^F: //p}' MAINTAINERS | \ xargs git ls-files | grep '\.[hc]$' | \ xargs spatch \ --sp-file scripts/coccinelle/errp-guard.cocci \ --macro-file scripts/cocci-macro-file.h \ --in-place --no-show-diff --max-width 80 Reported-by: Kevin Wolf <kwolf@redhat.com> Reported-by: Greg Kurz <groug@kaod.org> Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> [Commit message tweaked] Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20200707165037.1026246-9-armbru@redhat.com> [ERRP_AUTO_PROPAGATE() renamed to ERRP_GUARD(), and auto-propagated-errp.cocci to errp-guard.cocci. Commit message tweaked again.]
2020-07-07 18:50:37 +02:00
errp)) {
error_prepend(errp, "failed to set 'vdev': ");
goto fail;
}
if (!object_property_set_str(OBJECT(xendev), "drive",
xen_block_drive_get_node_name(drive),
xen: Use ERRP_GUARD() If we want to check error after errp-function call, we need to introduce local_err and then propagate it to errp. Instead, use the ERRP_GUARD() macro, benefits are: 1. No need of explicit error_propagate call 2. No need of explicit local_err variable: use errp directly 3. ERRP_GUARD() leaves errp as is if it's not NULL or &error_fatal, this means that we don't break error_abort (we'll abort on error_set, not on error_propagate) If we want to add some info to errp (by error_prepend() or error_append_hint()), we must use the ERRP_GUARD() macro. Otherwise, this info will not be added when errp == &error_fatal (the program will exit prior to the error_append_hint() or error_prepend() call). No such cases are being fixed here. This commit is generated by command sed -n '/^X86 Xen CPUs$/,/^$/{s/^F: //p}' MAINTAINERS | \ xargs git ls-files | grep '\.[hc]$' | \ xargs spatch \ --sp-file scripts/coccinelle/errp-guard.cocci \ --macro-file scripts/cocci-macro-file.h \ --in-place --no-show-diff --max-width 80 Reported-by: Kevin Wolf <kwolf@redhat.com> Reported-by: Greg Kurz <groug@kaod.org> Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> [Commit message tweaked] Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20200707165037.1026246-9-armbru@redhat.com> [ERRP_AUTO_PROPAGATE() renamed to ERRP_GUARD(), and auto-propagated-errp.cocci to errp-guard.cocci. Commit message tweaked again.]
2020-07-07 18:50:37 +02:00
errp)) {
error_prepend(errp, "failed to set 'drive': ");
goto fail;
}
if (!object_property_set_str(OBJECT(xendev), "iothread", iothread->id,
xen: Use ERRP_GUARD() If we want to check error after errp-function call, we need to introduce local_err and then propagate it to errp. Instead, use the ERRP_GUARD() macro, benefits are: 1. No need of explicit error_propagate call 2. No need of explicit local_err variable: use errp directly 3. ERRP_GUARD() leaves errp as is if it's not NULL or &error_fatal, this means that we don't break error_abort (we'll abort on error_set, not on error_propagate) If we want to add some info to errp (by error_prepend() or error_append_hint()), we must use the ERRP_GUARD() macro. Otherwise, this info will not be added when errp == &error_fatal (the program will exit prior to the error_append_hint() or error_prepend() call). No such cases are being fixed here. This commit is generated by command sed -n '/^X86 Xen CPUs$/,/^$/{s/^F: //p}' MAINTAINERS | \ xargs git ls-files | grep '\.[hc]$' | \ xargs spatch \ --sp-file scripts/coccinelle/errp-guard.cocci \ --macro-file scripts/cocci-macro-file.h \ --in-place --no-show-diff --max-width 80 Reported-by: Kevin Wolf <kwolf@redhat.com> Reported-by: Greg Kurz <groug@kaod.org> Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> [Commit message tweaked] Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20200707165037.1026246-9-armbru@redhat.com> [ERRP_AUTO_PROPAGATE() renamed to ERRP_GUARD(), and auto-propagated-errp.cocci to errp-guard.cocci. Commit message tweaked again.]
2020-07-07 18:50:37 +02:00
errp)) {
error_prepend(errp, "failed to set 'iothread': ");
goto fail;
}
blockdev->iothread = iothread;
blockdev->drive = drive;
xen: Use ERRP_GUARD() If we want to check error after errp-function call, we need to introduce local_err and then propagate it to errp. Instead, use the ERRP_GUARD() macro, benefits are: 1. No need of explicit error_propagate call 2. No need of explicit local_err variable: use errp directly 3. ERRP_GUARD() leaves errp as is if it's not NULL or &error_fatal, this means that we don't break error_abort (we'll abort on error_set, not on error_propagate) If we want to add some info to errp (by error_prepend() or error_append_hint()), we must use the ERRP_GUARD() macro. Otherwise, this info will not be added when errp == &error_fatal (the program will exit prior to the error_append_hint() or error_prepend() call). No such cases are being fixed here. This commit is generated by command sed -n '/^X86 Xen CPUs$/,/^$/{s/^F: //p}' MAINTAINERS | \ xargs git ls-files | grep '\.[hc]$' | \ xargs spatch \ --sp-file scripts/coccinelle/errp-guard.cocci \ --macro-file scripts/cocci-macro-file.h \ --in-place --no-show-diff --max-width 80 Reported-by: Kevin Wolf <kwolf@redhat.com> Reported-by: Greg Kurz <groug@kaod.org> Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> [Commit message tweaked] Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20200707165037.1026246-9-armbru@redhat.com> [ERRP_AUTO_PROPAGATE() renamed to ERRP_GUARD(), and auto-propagated-errp.cocci to errp-guard.cocci. Commit message tweaked again.]
2020-07-07 18:50:37 +02:00
if (!qdev_realize_and_unref(DEVICE(xendev), BUS(xenbus), errp)) {
error_prepend(errp, "realization of device %s failed: ", type);
goto fail;
}
xen_backend_set_device(backend, xendev);
return;
fail:
if (xendev) {
object_unparent(OBJECT(xendev));
}
if (iothread) {
xen_block_iothread_destroy(iothread, NULL);
}
if (drive) {
xen_block_drive_destroy(drive, NULL);
}
}
static void xen_block_device_destroy(XenBackendInstance *backend,
Error **errp)
{
xen: Use ERRP_GUARD() If we want to check error after errp-function call, we need to introduce local_err and then propagate it to errp. Instead, use the ERRP_GUARD() macro, benefits are: 1. No need of explicit error_propagate call 2. No need of explicit local_err variable: use errp directly 3. ERRP_GUARD() leaves errp as is if it's not NULL or &error_fatal, this means that we don't break error_abort (we'll abort on error_set, not on error_propagate) If we want to add some info to errp (by error_prepend() or error_append_hint()), we must use the ERRP_GUARD() macro. Otherwise, this info will not be added when errp == &error_fatal (the program will exit prior to the error_append_hint() or error_prepend() call). No such cases are being fixed here. This commit is generated by command sed -n '/^X86 Xen CPUs$/,/^$/{s/^F: //p}' MAINTAINERS | \ xargs git ls-files | grep '\.[hc]$' | \ xargs spatch \ --sp-file scripts/coccinelle/errp-guard.cocci \ --macro-file scripts/cocci-macro-file.h \ --in-place --no-show-diff --max-width 80 Reported-by: Kevin Wolf <kwolf@redhat.com> Reported-by: Greg Kurz <groug@kaod.org> Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> [Commit message tweaked] Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20200707165037.1026246-9-armbru@redhat.com> [ERRP_AUTO_PROPAGATE() renamed to ERRP_GUARD(), and auto-propagated-errp.cocci to errp-guard.cocci. Commit message tweaked again.]
2020-07-07 18:50:37 +02:00
ERRP_GUARD();
XenDevice *xendev = xen_backend_get_device(backend);
XenBlockDevice *blockdev = XEN_BLOCK_DEVICE(xendev);
XenBlockVdev *vdev = &blockdev->props.vdev;
XenBlockDrive *drive = blockdev->drive;
XenBlockIOThread *iothread = blockdev->iothread;
trace_xen_block_device_destroy(vdev->number);
object_unparent(OBJECT(xendev));
/*
* Drain all pending RCU callbacks as object_unparent() frees `xendev'
* in a RCU callback.
* And due to the property "drive" still existing in `xendev', we
* can't destroy the XenBlockDrive associated with `xendev' with
* xen_block_drive_destroy() below.
*/
drain_call_rcu();
if (iothread) {
xen: Use ERRP_GUARD() If we want to check error after errp-function call, we need to introduce local_err and then propagate it to errp. Instead, use the ERRP_GUARD() macro, benefits are: 1. No need of explicit error_propagate call 2. No need of explicit local_err variable: use errp directly 3. ERRP_GUARD() leaves errp as is if it's not NULL or &error_fatal, this means that we don't break error_abort (we'll abort on error_set, not on error_propagate) If we want to add some info to errp (by error_prepend() or error_append_hint()), we must use the ERRP_GUARD() macro. Otherwise, this info will not be added when errp == &error_fatal (the program will exit prior to the error_append_hint() or error_prepend() call). No such cases are being fixed here. This commit is generated by command sed -n '/^X86 Xen CPUs$/,/^$/{s/^F: //p}' MAINTAINERS | \ xargs git ls-files | grep '\.[hc]$' | \ xargs spatch \ --sp-file scripts/coccinelle/errp-guard.cocci \ --macro-file scripts/cocci-macro-file.h \ --in-place --no-show-diff --max-width 80 Reported-by: Kevin Wolf <kwolf@redhat.com> Reported-by: Greg Kurz <groug@kaod.org> Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> [Commit message tweaked] Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20200707165037.1026246-9-armbru@redhat.com> [ERRP_AUTO_PROPAGATE() renamed to ERRP_GUARD(), and auto-propagated-errp.cocci to errp-guard.cocci. Commit message tweaked again.]
2020-07-07 18:50:37 +02:00
xen_block_iothread_destroy(iothread, errp);
if (*errp) {
error_prepend(errp, "failed to destroy iothread: ");
return;
}
}
if (drive) {
xen: Use ERRP_GUARD() If we want to check error after errp-function call, we need to introduce local_err and then propagate it to errp. Instead, use the ERRP_GUARD() macro, benefits are: 1. No need of explicit error_propagate call 2. No need of explicit local_err variable: use errp directly 3. ERRP_GUARD() leaves errp as is if it's not NULL or &error_fatal, this means that we don't break error_abort (we'll abort on error_set, not on error_propagate) If we want to add some info to errp (by error_prepend() or error_append_hint()), we must use the ERRP_GUARD() macro. Otherwise, this info will not be added when errp == &error_fatal (the program will exit prior to the error_append_hint() or error_prepend() call). No such cases are being fixed here. This commit is generated by command sed -n '/^X86 Xen CPUs$/,/^$/{s/^F: //p}' MAINTAINERS | \ xargs git ls-files | grep '\.[hc]$' | \ xargs spatch \ --sp-file scripts/coccinelle/errp-guard.cocci \ --macro-file scripts/cocci-macro-file.h \ --in-place --no-show-diff --max-width 80 Reported-by: Kevin Wolf <kwolf@redhat.com> Reported-by: Greg Kurz <groug@kaod.org> Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> [Commit message tweaked] Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20200707165037.1026246-9-armbru@redhat.com> [ERRP_AUTO_PROPAGATE() renamed to ERRP_GUARD(), and auto-propagated-errp.cocci to errp-guard.cocci. Commit message tweaked again.]
2020-07-07 18:50:37 +02:00
xen_block_drive_destroy(drive, errp);
if (*errp) {
error_prepend(errp, "failed to destroy drive: ");
return;
}
}
}
static const XenBackendInfo xen_block_backend_info = {
.type = "qdisk",
.create = xen_block_device_create,
.destroy = xen_block_device_destroy,
};
static void xen_block_register_backend(void)
{
xen_backend_register(&xen_block_backend_info);
}
xen_backend_init(xen_block_register_backend);