qemu-e2k/hw/net/rocker/rocker.c

Ignoring revisions in .git-blame-ignore-revs. Click here to bypass and see the normal blame view.

1519 lines
42 KiB
C
Raw Normal View History

rocker: add new rocker switch device Rocker is a simulated ethernet switch device. The device supports up to 62 front-panel ports and supports L2 switching and L3 routing functions, as well as L2/L3/L4 ACLs. The device presents a single PCI device for each switch, with a memory-mapped register space for device driver access. Rocker device is invoked with -device, for example a 4-port switch: -device rocker,name=sw1,len-ports=4,ports[0]=dev0,ports[1]=dev1, \ ports[2]=dev2,ports[3]=dev3 Each port is a netdev and can be paired with using -netdev id=<port name>. Signed-off-by: Scott Feldman <sfeldma@gmail.com> Signed-off-by: Jiri Pirko <jiri@resnulli.us> Acked-by: Scott Feldman <sfeldma@gmail.com> Acked-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David Ahern <dsahern@gmail.com> Message-id: 1426306173-24884-7-git-send-email-sfeldma@gmail.com rocker: fix clang compiler errors Consolidate all forward typedef declarations to rocker.h. Signed-off-by: David Ahern <dsahern@gmail.com> Acked-by: Scott Feldman <sfeldma@gmail.com> Acked-by: Jiri Pirko <jiri@resnulli.us> rocker: add support for flow modification We had support for flow add/del. This adds support for flow mod. I needed this for L3 support where an existing route is modified using NLM_F_REPLACE. For example: ip route add 12.0.0.0/30 nexthop via 11.0.0.1 dev swp1 ip route change 12.0.0.0/30 nexthop via 11.0.0.9 dev swp2 The first cmd adds the route. The second cmd changes the existing route by changing its nexthop info. In the device, a mod operation results in the matching flow enty being modified with the new settings. This is atomic to the device. Signed-off-by: Scott Feldman <sfeldma@gmail.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-03-14 05:09:30 +01:00
/*
* QEMU rocker switch emulation - PCI device
*
* Copyright (c) 2014 Scott Feldman <sfeldma@gmail.com>
* Copyright (c) 2014 Jiri Pirko <jiri@resnulli.us>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#include "qemu/osdep.h"
#include "hw/pci/pci_device.h"
#include "hw/qdev-properties.h"
#include "hw/qdev-properties-system.h"
#include "migration/vmstate.h"
rocker: add new rocker switch device Rocker is a simulated ethernet switch device. The device supports up to 62 front-panel ports and supports L2 switching and L3 routing functions, as well as L2/L3/L4 ACLs. The device presents a single PCI device for each switch, with a memory-mapped register space for device driver access. Rocker device is invoked with -device, for example a 4-port switch: -device rocker,name=sw1,len-ports=4,ports[0]=dev0,ports[1]=dev1, \ ports[2]=dev2,ports[3]=dev3 Each port is a netdev and can be paired with using -netdev id=<port name>. Signed-off-by: Scott Feldman <sfeldma@gmail.com> Signed-off-by: Jiri Pirko <jiri@resnulli.us> Acked-by: Scott Feldman <sfeldma@gmail.com> Acked-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David Ahern <dsahern@gmail.com> Message-id: 1426306173-24884-7-git-send-email-sfeldma@gmail.com rocker: fix clang compiler errors Consolidate all forward typedef declarations to rocker.h. Signed-off-by: David Ahern <dsahern@gmail.com> Acked-by: Scott Feldman <sfeldma@gmail.com> Acked-by: Jiri Pirko <jiri@resnulli.us> rocker: add support for flow modification We had support for flow add/del. This adds support for flow mod. I needed this for L3 support where an existing route is modified using NLM_F_REPLACE. For example: ip route add 12.0.0.0/30 nexthop via 11.0.0.1 dev swp1 ip route change 12.0.0.0/30 nexthop via 11.0.0.9 dev swp2 The first cmd adds the route. The second cmd changes the existing route by changing its nexthop info. In the device, a mod operation results in the matching flow enty being modified with the new settings. This is atomic to the device. Signed-off-by: Scott Feldman <sfeldma@gmail.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-03-14 05:09:30 +01:00
#include "hw/pci/msix.h"
#include "net/net.h"
#include "net/eth.h"
#include "qapi/error.h"
#include "qapi/qapi-commands-rocker.h"
rocker: add new rocker switch device Rocker is a simulated ethernet switch device. The device supports up to 62 front-panel ports and supports L2 switching and L3 routing functions, as well as L2/L3/L4 ACLs. The device presents a single PCI device for each switch, with a memory-mapped register space for device driver access. Rocker device is invoked with -device, for example a 4-port switch: -device rocker,name=sw1,len-ports=4,ports[0]=dev0,ports[1]=dev1, \ ports[2]=dev2,ports[3]=dev3 Each port is a netdev and can be paired with using -netdev id=<port name>. Signed-off-by: Scott Feldman <sfeldma@gmail.com> Signed-off-by: Jiri Pirko <jiri@resnulli.us> Acked-by: Scott Feldman <sfeldma@gmail.com> Acked-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David Ahern <dsahern@gmail.com> Message-id: 1426306173-24884-7-git-send-email-sfeldma@gmail.com rocker: fix clang compiler errors Consolidate all forward typedef declarations to rocker.h. Signed-off-by: David Ahern <dsahern@gmail.com> Acked-by: Scott Feldman <sfeldma@gmail.com> Acked-by: Jiri Pirko <jiri@resnulli.us> rocker: add support for flow modification We had support for flow add/del. This adds support for flow mod. I needed this for L3 support where an existing route is modified using NLM_F_REPLACE. For example: ip route add 12.0.0.0/30 nexthop via 11.0.0.1 dev swp1 ip route change 12.0.0.0/30 nexthop via 11.0.0.9 dev swp2 The first cmd adds the route. The second cmd changes the existing route by changing its nexthop info. In the device, a mod operation results in the matching flow enty being modified with the new settings. This is atomic to the device. Signed-off-by: Scott Feldman <sfeldma@gmail.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-03-14 05:09:30 +01:00
#include "qemu/iov.h"
#include "qemu/module.h"
rocker: add new rocker switch device Rocker is a simulated ethernet switch device. The device supports up to 62 front-panel ports and supports L2 switching and L3 routing functions, as well as L2/L3/L4 ACLs. The device presents a single PCI device for each switch, with a memory-mapped register space for device driver access. Rocker device is invoked with -device, for example a 4-port switch: -device rocker,name=sw1,len-ports=4,ports[0]=dev0,ports[1]=dev1, \ ports[2]=dev2,ports[3]=dev3 Each port is a netdev and can be paired with using -netdev id=<port name>. Signed-off-by: Scott Feldman <sfeldma@gmail.com> Signed-off-by: Jiri Pirko <jiri@resnulli.us> Acked-by: Scott Feldman <sfeldma@gmail.com> Acked-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David Ahern <dsahern@gmail.com> Message-id: 1426306173-24884-7-git-send-email-sfeldma@gmail.com rocker: fix clang compiler errors Consolidate all forward typedef declarations to rocker.h. Signed-off-by: David Ahern <dsahern@gmail.com> Acked-by: Scott Feldman <sfeldma@gmail.com> Acked-by: Jiri Pirko <jiri@resnulli.us> rocker: add support for flow modification We had support for flow add/del. This adds support for flow mod. I needed this for L3 support where an existing route is modified using NLM_F_REPLACE. For example: ip route add 12.0.0.0/30 nexthop via 11.0.0.1 dev swp1 ip route change 12.0.0.0/30 nexthop via 11.0.0.9 dev swp2 The first cmd adds the route. The second cmd changes the existing route by changing its nexthop info. In the device, a mod operation results in the matching flow enty being modified with the new settings. This is atomic to the device. Signed-off-by: Scott Feldman <sfeldma@gmail.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-03-14 05:09:30 +01:00
#include "qemu/bitops.h"
#include "qemu/log.h"
rocker: add new rocker switch device Rocker is a simulated ethernet switch device. The device supports up to 62 front-panel ports and supports L2 switching and L3 routing functions, as well as L2/L3/L4 ACLs. The device presents a single PCI device for each switch, with a memory-mapped register space for device driver access. Rocker device is invoked with -device, for example a 4-port switch: -device rocker,name=sw1,len-ports=4,ports[0]=dev0,ports[1]=dev1, \ ports[2]=dev2,ports[3]=dev3 Each port is a netdev and can be paired with using -netdev id=<port name>. Signed-off-by: Scott Feldman <sfeldma@gmail.com> Signed-off-by: Jiri Pirko <jiri@resnulli.us> Acked-by: Scott Feldman <sfeldma@gmail.com> Acked-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David Ahern <dsahern@gmail.com> Message-id: 1426306173-24884-7-git-send-email-sfeldma@gmail.com rocker: fix clang compiler errors Consolidate all forward typedef declarations to rocker.h. Signed-off-by: David Ahern <dsahern@gmail.com> Acked-by: Scott Feldman <sfeldma@gmail.com> Acked-by: Jiri Pirko <jiri@resnulli.us> rocker: add support for flow modification We had support for flow add/del. This adds support for flow mod. I needed this for L3 support where an existing route is modified using NLM_F_REPLACE. For example: ip route add 12.0.0.0/30 nexthop via 11.0.0.1 dev swp1 ip route change 12.0.0.0/30 nexthop via 11.0.0.9 dev swp2 The first cmd adds the route. The second cmd changes the existing route by changing its nexthop info. In the device, a mod operation results in the matching flow enty being modified with the new settings. This is atomic to the device. Signed-off-by: Scott Feldman <sfeldma@gmail.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-03-14 05:09:30 +01:00
#include "rocker.h"
#include "rocker_hw.h"
#include "rocker_fp.h"
#include "rocker_desc.h"
#include "rocker_tlv.h"
#include "rocker_world.h"
#include "rocker_of_dpa.h"
struct rocker {
/* private */
PCIDevice parent_obj;
/* public */
MemoryRegion mmio;
MemoryRegion msix_bar;
/* switch configuration */
char *name; /* switch name */
char *world_name; /* world name */
rocker: add new rocker switch device Rocker is a simulated ethernet switch device. The device supports up to 62 front-panel ports and supports L2 switching and L3 routing functions, as well as L2/L3/L4 ACLs. The device presents a single PCI device for each switch, with a memory-mapped register space for device driver access. Rocker device is invoked with -device, for example a 4-port switch: -device rocker,name=sw1,len-ports=4,ports[0]=dev0,ports[1]=dev1, \ ports[2]=dev2,ports[3]=dev3 Each port is a netdev and can be paired with using -netdev id=<port name>. Signed-off-by: Scott Feldman <sfeldma@gmail.com> Signed-off-by: Jiri Pirko <jiri@resnulli.us> Acked-by: Scott Feldman <sfeldma@gmail.com> Acked-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David Ahern <dsahern@gmail.com> Message-id: 1426306173-24884-7-git-send-email-sfeldma@gmail.com rocker: fix clang compiler errors Consolidate all forward typedef declarations to rocker.h. Signed-off-by: David Ahern <dsahern@gmail.com> Acked-by: Scott Feldman <sfeldma@gmail.com> Acked-by: Jiri Pirko <jiri@resnulli.us> rocker: add support for flow modification We had support for flow add/del. This adds support for flow mod. I needed this for L3 support where an existing route is modified using NLM_F_REPLACE. For example: ip route add 12.0.0.0/30 nexthop via 11.0.0.1 dev swp1 ip route change 12.0.0.0/30 nexthop via 11.0.0.9 dev swp2 The first cmd adds the route. The second cmd changes the existing route by changing its nexthop info. In the device, a mod operation results in the matching flow enty being modified with the new settings. This is atomic to the device. Signed-off-by: Scott Feldman <sfeldma@gmail.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-03-14 05:09:30 +01:00
uint32_t fp_ports; /* front-panel port count */
NICPeers *fp_ports_peers;
MACAddr fp_start_macaddr; /* front-panel port 0 mac addr */
uint64_t switch_id; /* switch id */
/* front-panel ports */
FpPort *fp_port[ROCKER_FP_PORTS_MAX];
/* register backings */
uint32_t test_reg;
uint64_t test_reg64;
dma_addr_t test_dma_addr;
uint32_t test_dma_size;
uint64_t lower32; /* lower 32-bit val in 2-part 64-bit access */
/* desc rings */
DescRing **rings;
/* switch worlds */
World *worlds[ROCKER_WORLD_TYPE_MAX];
World *world_dflt;
QLIST_ENTRY(rocker) next;
};
static QLIST_HEAD(, rocker) rockers;
Rocker *rocker_find(const char *name)
{
Rocker *r;
QLIST_FOREACH(r, &rockers, next)
if (strcmp(r->name, name) == 0) {
return r;
}
return NULL;
}
World *rocker_get_world(Rocker *r, enum rocker_world_type type)
{
if (type < ROCKER_WORLD_TYPE_MAX) {
return r->worlds[type];
}
return NULL;
}
qmp/hmp: add rocker device support Add QMP/HMP support for rocker devices. This is mostly for debugging purposes to see inside the device's tables and port configurations. Some examples: (qemu) info rocker sw1 name: sw1 id: 0x0000013512005452 ports: 4 (qemu) info rocker-ports sw1 ena/ speed/ auto port link duplex neg? sw1.1 up 10G FD No sw1.2 up 10G FD No sw1.3 !ena 10G FD No sw1.4 !ena 10G FD No (qemu) info rocker-of-dpa-flows sw1 prio tbl hits key(mask) --> actions 2 60 pport 1 vlan 1 LLDP src 00:02:00:00:02:00 dst 01:80:c2:00:00:0e 2 60 pport 1 vlan 1 ARP src 00:02:00:00:02:00 dst 00:02:00:00:03:00 2 60 pport 2 vlan 2 IPv6 src 00:02:00:00:03:00 dst 33:33:ff:00:00:02 proto 58 3 50 vlan 2 dst 33:33:ff:00:00:02 --> write group 0x32000001 goto tbl 60 2 60 pport 2 vlan 2 IPv6 src 00:02:00:00:03:00 dst 33:33:ff:00:03:00 proto 58 3 50 1 vlan 2 dst 33:33:ff:00:03:00 --> write group 0x32000001 goto tbl 60 2 60 pport 2 vlan 2 ARP src 00:02:00:00:03:00 dst 00:02:00:00:02:00 3 50 2 vlan 2 dst 00:02:00:00:02:00 --> write group 0x02000001 goto tbl 60 2 60 1 pport 2 vlan 2 IP src 00:02:00:00:03:00 dst 00:02:00:00:02:00 proto 1 3 50 2 vlan 1 dst 00:02:00:00:03:00 --> write group 0x01000002 goto tbl 60 2 60 1 pport 1 vlan 1 IP src 00:02:00:00:02:00 dst 00:02:00:00:03:00 proto 1 2 60 pport 1 vlan 1 IPv6 src 00:02:00:00:02:00 dst 33:33:ff:00:00:01 proto 58 3 50 vlan 1 dst 33:33:ff:00:00:01 --> write group 0x31000000 goto tbl 60 2 60 pport 1 vlan 1 IPv6 src 00:02:00:00:02:00 dst 33:33:ff:00:02:00 proto 58 3 50 1 vlan 1 dst 33:33:ff:00:02:00 --> write group 0x31000000 goto tbl 60 1 60 173 pport 2 vlan 2 LLDP src <any> dst 01:80:c2:00:00:0e --> write group 0x02000000 1 60 6 pport 2 vlan 2 IPv6 src <any> dst <any> --> write group 0x02000000 1 60 174 pport 1 vlan 1 LLDP src <any> dst 01:80:c2:00:00:0e --> write group 0x01000000 1 60 174 pport 2 vlan 2 IP src <any> dst <any> --> write group 0x02000000 1 60 6 pport 1 vlan 1 IPv6 src <any> dst <any> --> write group 0x01000000 1 60 181 pport 2 vlan 2 ARP src <any> dst <any> --> write group 0x02000000 1 10 715 pport 2 --> apply new vlan 2 goto tbl 20 1 60 177 pport 1 vlan 1 ARP src <any> dst <any> --> write group 0x01000000 1 60 174 pport 1 vlan 1 IP src <any> dst <any> --> write group 0x01000000 1 10 717 pport 1 --> apply new vlan 1 goto tbl 20 1 0 1432 pport 0(0xffff) --> goto tbl 10 (qemu) info rocker-of-dpa-groups sw1 id (decode) --> buckets 0x32000001 (type L2 multicast vlan 2 index 1) --> groups [0x02000001,0x02000000] 0x02000001 (type L2 interface vlan 2 pport 1) --> pop vlan out pport 1 0x01000002 (type L2 interface vlan 1 pport 2) --> pop vlan out pport 2 0x02000000 (type L2 interface vlan 2 pport 0) --> pop vlan out pport 0 0x01000000 (type L2 interface vlan 1 pport 0) --> pop vlan out pport 0 0x31000000 (type L2 multicast vlan 1 index 0) --> groups [0x01000002,0x01000000] [Added "query-" prefixes to rocker.json commands as suggested by Eric Blake <eblake@redhat.com>. --Stefan] Signed-off-by: Scott Feldman <sfeldma@gmail.com> Signed-off-by: Jiri Pirko <jiri@resnulli.us> Message-id: 1433985681-56138-5-git-send-email-sfeldma@gmail.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-06-11 03:21:21 +02:00
RockerSwitch *qmp_query_rocker(const char *name, Error **errp)
{
RockerSwitch *rocker;
qmp/hmp: add rocker device support Add QMP/HMP support for rocker devices. This is mostly for debugging purposes to see inside the device's tables and port configurations. Some examples: (qemu) info rocker sw1 name: sw1 id: 0x0000013512005452 ports: 4 (qemu) info rocker-ports sw1 ena/ speed/ auto port link duplex neg? sw1.1 up 10G FD No sw1.2 up 10G FD No sw1.3 !ena 10G FD No sw1.4 !ena 10G FD No (qemu) info rocker-of-dpa-flows sw1 prio tbl hits key(mask) --> actions 2 60 pport 1 vlan 1 LLDP src 00:02:00:00:02:00 dst 01:80:c2:00:00:0e 2 60 pport 1 vlan 1 ARP src 00:02:00:00:02:00 dst 00:02:00:00:03:00 2 60 pport 2 vlan 2 IPv6 src 00:02:00:00:03:00 dst 33:33:ff:00:00:02 proto 58 3 50 vlan 2 dst 33:33:ff:00:00:02 --> write group 0x32000001 goto tbl 60 2 60 pport 2 vlan 2 IPv6 src 00:02:00:00:03:00 dst 33:33:ff:00:03:00 proto 58 3 50 1 vlan 2 dst 33:33:ff:00:03:00 --> write group 0x32000001 goto tbl 60 2 60 pport 2 vlan 2 ARP src 00:02:00:00:03:00 dst 00:02:00:00:02:00 3 50 2 vlan 2 dst 00:02:00:00:02:00 --> write group 0x02000001 goto tbl 60 2 60 1 pport 2 vlan 2 IP src 00:02:00:00:03:00 dst 00:02:00:00:02:00 proto 1 3 50 2 vlan 1 dst 00:02:00:00:03:00 --> write group 0x01000002 goto tbl 60 2 60 1 pport 1 vlan 1 IP src 00:02:00:00:02:00 dst 00:02:00:00:03:00 proto 1 2 60 pport 1 vlan 1 IPv6 src 00:02:00:00:02:00 dst 33:33:ff:00:00:01 proto 58 3 50 vlan 1 dst 33:33:ff:00:00:01 --> write group 0x31000000 goto tbl 60 2 60 pport 1 vlan 1 IPv6 src 00:02:00:00:02:00 dst 33:33:ff:00:02:00 proto 58 3 50 1 vlan 1 dst 33:33:ff:00:02:00 --> write group 0x31000000 goto tbl 60 1 60 173 pport 2 vlan 2 LLDP src <any> dst 01:80:c2:00:00:0e --> write group 0x02000000 1 60 6 pport 2 vlan 2 IPv6 src <any> dst <any> --> write group 0x02000000 1 60 174 pport 1 vlan 1 LLDP src <any> dst 01:80:c2:00:00:0e --> write group 0x01000000 1 60 174 pport 2 vlan 2 IP src <any> dst <any> --> write group 0x02000000 1 60 6 pport 1 vlan 1 IPv6 src <any> dst <any> --> write group 0x01000000 1 60 181 pport 2 vlan 2 ARP src <any> dst <any> --> write group 0x02000000 1 10 715 pport 2 --> apply new vlan 2 goto tbl 20 1 60 177 pport 1 vlan 1 ARP src <any> dst <any> --> write group 0x01000000 1 60 174 pport 1 vlan 1 IP src <any> dst <any> --> write group 0x01000000 1 10 717 pport 1 --> apply new vlan 1 goto tbl 20 1 0 1432 pport 0(0xffff) --> goto tbl 10 (qemu) info rocker-of-dpa-groups sw1 id (decode) --> buckets 0x32000001 (type L2 multicast vlan 2 index 1) --> groups [0x02000001,0x02000000] 0x02000001 (type L2 interface vlan 2 pport 1) --> pop vlan out pport 1 0x01000002 (type L2 interface vlan 1 pport 2) --> pop vlan out pport 2 0x02000000 (type L2 interface vlan 2 pport 0) --> pop vlan out pport 0 0x01000000 (type L2 interface vlan 1 pport 0) --> pop vlan out pport 0 0x31000000 (type L2 multicast vlan 1 index 0) --> groups [0x01000002,0x01000000] [Added "query-" prefixes to rocker.json commands as suggested by Eric Blake <eblake@redhat.com>. --Stefan] Signed-off-by: Scott Feldman <sfeldma@gmail.com> Signed-off-by: Jiri Pirko <jiri@resnulli.us> Message-id: 1433985681-56138-5-git-send-email-sfeldma@gmail.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-06-11 03:21:21 +02:00
Rocker *r;
r = rocker_find(name);
if (!r) {
error_setg(errp, "rocker %s not found", name);
qmp/hmp: add rocker device support Add QMP/HMP support for rocker devices. This is mostly for debugging purposes to see inside the device's tables and port configurations. Some examples: (qemu) info rocker sw1 name: sw1 id: 0x0000013512005452 ports: 4 (qemu) info rocker-ports sw1 ena/ speed/ auto port link duplex neg? sw1.1 up 10G FD No sw1.2 up 10G FD No sw1.3 !ena 10G FD No sw1.4 !ena 10G FD No (qemu) info rocker-of-dpa-flows sw1 prio tbl hits key(mask) --> actions 2 60 pport 1 vlan 1 LLDP src 00:02:00:00:02:00 dst 01:80:c2:00:00:0e 2 60 pport 1 vlan 1 ARP src 00:02:00:00:02:00 dst 00:02:00:00:03:00 2 60 pport 2 vlan 2 IPv6 src 00:02:00:00:03:00 dst 33:33:ff:00:00:02 proto 58 3 50 vlan 2 dst 33:33:ff:00:00:02 --> write group 0x32000001 goto tbl 60 2 60 pport 2 vlan 2 IPv6 src 00:02:00:00:03:00 dst 33:33:ff:00:03:00 proto 58 3 50 1 vlan 2 dst 33:33:ff:00:03:00 --> write group 0x32000001 goto tbl 60 2 60 pport 2 vlan 2 ARP src 00:02:00:00:03:00 dst 00:02:00:00:02:00 3 50 2 vlan 2 dst 00:02:00:00:02:00 --> write group 0x02000001 goto tbl 60 2 60 1 pport 2 vlan 2 IP src 00:02:00:00:03:00 dst 00:02:00:00:02:00 proto 1 3 50 2 vlan 1 dst 00:02:00:00:03:00 --> write group 0x01000002 goto tbl 60 2 60 1 pport 1 vlan 1 IP src 00:02:00:00:02:00 dst 00:02:00:00:03:00 proto 1 2 60 pport 1 vlan 1 IPv6 src 00:02:00:00:02:00 dst 33:33:ff:00:00:01 proto 58 3 50 vlan 1 dst 33:33:ff:00:00:01 --> write group 0x31000000 goto tbl 60 2 60 pport 1 vlan 1 IPv6 src 00:02:00:00:02:00 dst 33:33:ff:00:02:00 proto 58 3 50 1 vlan 1 dst 33:33:ff:00:02:00 --> write group 0x31000000 goto tbl 60 1 60 173 pport 2 vlan 2 LLDP src <any> dst 01:80:c2:00:00:0e --> write group 0x02000000 1 60 6 pport 2 vlan 2 IPv6 src <any> dst <any> --> write group 0x02000000 1 60 174 pport 1 vlan 1 LLDP src <any> dst 01:80:c2:00:00:0e --> write group 0x01000000 1 60 174 pport 2 vlan 2 IP src <any> dst <any> --> write group 0x02000000 1 60 6 pport 1 vlan 1 IPv6 src <any> dst <any> --> write group 0x01000000 1 60 181 pport 2 vlan 2 ARP src <any> dst <any> --> write group 0x02000000 1 10 715 pport 2 --> apply new vlan 2 goto tbl 20 1 60 177 pport 1 vlan 1 ARP src <any> dst <any> --> write group 0x01000000 1 60 174 pport 1 vlan 1 IP src <any> dst <any> --> write group 0x01000000 1 10 717 pport 1 --> apply new vlan 1 goto tbl 20 1 0 1432 pport 0(0xffff) --> goto tbl 10 (qemu) info rocker-of-dpa-groups sw1 id (decode) --> buckets 0x32000001 (type L2 multicast vlan 2 index 1) --> groups [0x02000001,0x02000000] 0x02000001 (type L2 interface vlan 2 pport 1) --> pop vlan out pport 1 0x01000002 (type L2 interface vlan 1 pport 2) --> pop vlan out pport 2 0x02000000 (type L2 interface vlan 2 pport 0) --> pop vlan out pport 0 0x01000000 (type L2 interface vlan 1 pport 0) --> pop vlan out pport 0 0x31000000 (type L2 multicast vlan 1 index 0) --> groups [0x01000002,0x01000000] [Added "query-" prefixes to rocker.json commands as suggested by Eric Blake <eblake@redhat.com>. --Stefan] Signed-off-by: Scott Feldman <sfeldma@gmail.com> Signed-off-by: Jiri Pirko <jiri@resnulli.us> Message-id: 1433985681-56138-5-git-send-email-sfeldma@gmail.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-06-11 03:21:21 +02:00
return NULL;
}
rocker = g_new0(RockerSwitch, 1);
qmp/hmp: add rocker device support Add QMP/HMP support for rocker devices. This is mostly for debugging purposes to see inside the device's tables and port configurations. Some examples: (qemu) info rocker sw1 name: sw1 id: 0x0000013512005452 ports: 4 (qemu) info rocker-ports sw1 ena/ speed/ auto port link duplex neg? sw1.1 up 10G FD No sw1.2 up 10G FD No sw1.3 !ena 10G FD No sw1.4 !ena 10G FD No (qemu) info rocker-of-dpa-flows sw1 prio tbl hits key(mask) --> actions 2 60 pport 1 vlan 1 LLDP src 00:02:00:00:02:00 dst 01:80:c2:00:00:0e 2 60 pport 1 vlan 1 ARP src 00:02:00:00:02:00 dst 00:02:00:00:03:00 2 60 pport 2 vlan 2 IPv6 src 00:02:00:00:03:00 dst 33:33:ff:00:00:02 proto 58 3 50 vlan 2 dst 33:33:ff:00:00:02 --> write group 0x32000001 goto tbl 60 2 60 pport 2 vlan 2 IPv6 src 00:02:00:00:03:00 dst 33:33:ff:00:03:00 proto 58 3 50 1 vlan 2 dst 33:33:ff:00:03:00 --> write group 0x32000001 goto tbl 60 2 60 pport 2 vlan 2 ARP src 00:02:00:00:03:00 dst 00:02:00:00:02:00 3 50 2 vlan 2 dst 00:02:00:00:02:00 --> write group 0x02000001 goto tbl 60 2 60 1 pport 2 vlan 2 IP src 00:02:00:00:03:00 dst 00:02:00:00:02:00 proto 1 3 50 2 vlan 1 dst 00:02:00:00:03:00 --> write group 0x01000002 goto tbl 60 2 60 1 pport 1 vlan 1 IP src 00:02:00:00:02:00 dst 00:02:00:00:03:00 proto 1 2 60 pport 1 vlan 1 IPv6 src 00:02:00:00:02:00 dst 33:33:ff:00:00:01 proto 58 3 50 vlan 1 dst 33:33:ff:00:00:01 --> write group 0x31000000 goto tbl 60 2 60 pport 1 vlan 1 IPv6 src 00:02:00:00:02:00 dst 33:33:ff:00:02:00 proto 58 3 50 1 vlan 1 dst 33:33:ff:00:02:00 --> write group 0x31000000 goto tbl 60 1 60 173 pport 2 vlan 2 LLDP src <any> dst 01:80:c2:00:00:0e --> write group 0x02000000 1 60 6 pport 2 vlan 2 IPv6 src <any> dst <any> --> write group 0x02000000 1 60 174 pport 1 vlan 1 LLDP src <any> dst 01:80:c2:00:00:0e --> write group 0x01000000 1 60 174 pport 2 vlan 2 IP src <any> dst <any> --> write group 0x02000000 1 60 6 pport 1 vlan 1 IPv6 src <any> dst <any> --> write group 0x01000000 1 60 181 pport 2 vlan 2 ARP src <any> dst <any> --> write group 0x02000000 1 10 715 pport 2 --> apply new vlan 2 goto tbl 20 1 60 177 pport 1 vlan 1 ARP src <any> dst <any> --> write group 0x01000000 1 60 174 pport 1 vlan 1 IP src <any> dst <any> --> write group 0x01000000 1 10 717 pport 1 --> apply new vlan 1 goto tbl 20 1 0 1432 pport 0(0xffff) --> goto tbl 10 (qemu) info rocker-of-dpa-groups sw1 id (decode) --> buckets 0x32000001 (type L2 multicast vlan 2 index 1) --> groups [0x02000001,0x02000000] 0x02000001 (type L2 interface vlan 2 pport 1) --> pop vlan out pport 1 0x01000002 (type L2 interface vlan 1 pport 2) --> pop vlan out pport 2 0x02000000 (type L2 interface vlan 2 pport 0) --> pop vlan out pport 0 0x01000000 (type L2 interface vlan 1 pport 0) --> pop vlan out pport 0 0x31000000 (type L2 multicast vlan 1 index 0) --> groups [0x01000002,0x01000000] [Added "query-" prefixes to rocker.json commands as suggested by Eric Blake <eblake@redhat.com>. --Stefan] Signed-off-by: Scott Feldman <sfeldma@gmail.com> Signed-off-by: Jiri Pirko <jiri@resnulli.us> Message-id: 1433985681-56138-5-git-send-email-sfeldma@gmail.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-06-11 03:21:21 +02:00
rocker->name = g_strdup(r->name);
rocker->id = r->switch_id;
rocker->ports = r->fp_ports;
return rocker;
}
RockerPortList *qmp_query_rocker_ports(const char *name, Error **errp)
{
RockerPortList *list = NULL;
Rocker *r;
int i;
r = rocker_find(name);
if (!r) {
error_setg(errp, "rocker %s not found", name);
qmp/hmp: add rocker device support Add QMP/HMP support for rocker devices. This is mostly for debugging purposes to see inside the device's tables and port configurations. Some examples: (qemu) info rocker sw1 name: sw1 id: 0x0000013512005452 ports: 4 (qemu) info rocker-ports sw1 ena/ speed/ auto port link duplex neg? sw1.1 up 10G FD No sw1.2 up 10G FD No sw1.3 !ena 10G FD No sw1.4 !ena 10G FD No (qemu) info rocker-of-dpa-flows sw1 prio tbl hits key(mask) --> actions 2 60 pport 1 vlan 1 LLDP src 00:02:00:00:02:00 dst 01:80:c2:00:00:0e 2 60 pport 1 vlan 1 ARP src 00:02:00:00:02:00 dst 00:02:00:00:03:00 2 60 pport 2 vlan 2 IPv6 src 00:02:00:00:03:00 dst 33:33:ff:00:00:02 proto 58 3 50 vlan 2 dst 33:33:ff:00:00:02 --> write group 0x32000001 goto tbl 60 2 60 pport 2 vlan 2 IPv6 src 00:02:00:00:03:00 dst 33:33:ff:00:03:00 proto 58 3 50 1 vlan 2 dst 33:33:ff:00:03:00 --> write group 0x32000001 goto tbl 60 2 60 pport 2 vlan 2 ARP src 00:02:00:00:03:00 dst 00:02:00:00:02:00 3 50 2 vlan 2 dst 00:02:00:00:02:00 --> write group 0x02000001 goto tbl 60 2 60 1 pport 2 vlan 2 IP src 00:02:00:00:03:00 dst 00:02:00:00:02:00 proto 1 3 50 2 vlan 1 dst 00:02:00:00:03:00 --> write group 0x01000002 goto tbl 60 2 60 1 pport 1 vlan 1 IP src 00:02:00:00:02:00 dst 00:02:00:00:03:00 proto 1 2 60 pport 1 vlan 1 IPv6 src 00:02:00:00:02:00 dst 33:33:ff:00:00:01 proto 58 3 50 vlan 1 dst 33:33:ff:00:00:01 --> write group 0x31000000 goto tbl 60 2 60 pport 1 vlan 1 IPv6 src 00:02:00:00:02:00 dst 33:33:ff:00:02:00 proto 58 3 50 1 vlan 1 dst 33:33:ff:00:02:00 --> write group 0x31000000 goto tbl 60 1 60 173 pport 2 vlan 2 LLDP src <any> dst 01:80:c2:00:00:0e --> write group 0x02000000 1 60 6 pport 2 vlan 2 IPv6 src <any> dst <any> --> write group 0x02000000 1 60 174 pport 1 vlan 1 LLDP src <any> dst 01:80:c2:00:00:0e --> write group 0x01000000 1 60 174 pport 2 vlan 2 IP src <any> dst <any> --> write group 0x02000000 1 60 6 pport 1 vlan 1 IPv6 src <any> dst <any> --> write group 0x01000000 1 60 181 pport 2 vlan 2 ARP src <any> dst <any> --> write group 0x02000000 1 10 715 pport 2 --> apply new vlan 2 goto tbl 20 1 60 177 pport 1 vlan 1 ARP src <any> dst <any> --> write group 0x01000000 1 60 174 pport 1 vlan 1 IP src <any> dst <any> --> write group 0x01000000 1 10 717 pport 1 --> apply new vlan 1 goto tbl 20 1 0 1432 pport 0(0xffff) --> goto tbl 10 (qemu) info rocker-of-dpa-groups sw1 id (decode) --> buckets 0x32000001 (type L2 multicast vlan 2 index 1) --> groups [0x02000001,0x02000000] 0x02000001 (type L2 interface vlan 2 pport 1) --> pop vlan out pport 1 0x01000002 (type L2 interface vlan 1 pport 2) --> pop vlan out pport 2 0x02000000 (type L2 interface vlan 2 pport 0) --> pop vlan out pport 0 0x01000000 (type L2 interface vlan 1 pport 0) --> pop vlan out pport 0 0x31000000 (type L2 multicast vlan 1 index 0) --> groups [0x01000002,0x01000000] [Added "query-" prefixes to rocker.json commands as suggested by Eric Blake <eblake@redhat.com>. --Stefan] Signed-off-by: Scott Feldman <sfeldma@gmail.com> Signed-off-by: Jiri Pirko <jiri@resnulli.us> Message-id: 1433985681-56138-5-git-send-email-sfeldma@gmail.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-06-11 03:21:21 +02:00
return NULL;
}
for (i = r->fp_ports - 1; i >= 0; i--) {
QAPI_LIST_PREPEND(list, fp_port_get_info(r->fp_port[i]));
qmp/hmp: add rocker device support Add QMP/HMP support for rocker devices. This is mostly for debugging purposes to see inside the device's tables and port configurations. Some examples: (qemu) info rocker sw1 name: sw1 id: 0x0000013512005452 ports: 4 (qemu) info rocker-ports sw1 ena/ speed/ auto port link duplex neg? sw1.1 up 10G FD No sw1.2 up 10G FD No sw1.3 !ena 10G FD No sw1.4 !ena 10G FD No (qemu) info rocker-of-dpa-flows sw1 prio tbl hits key(mask) --> actions 2 60 pport 1 vlan 1 LLDP src 00:02:00:00:02:00 dst 01:80:c2:00:00:0e 2 60 pport 1 vlan 1 ARP src 00:02:00:00:02:00 dst 00:02:00:00:03:00 2 60 pport 2 vlan 2 IPv6 src 00:02:00:00:03:00 dst 33:33:ff:00:00:02 proto 58 3 50 vlan 2 dst 33:33:ff:00:00:02 --> write group 0x32000001 goto tbl 60 2 60 pport 2 vlan 2 IPv6 src 00:02:00:00:03:00 dst 33:33:ff:00:03:00 proto 58 3 50 1 vlan 2 dst 33:33:ff:00:03:00 --> write group 0x32000001 goto tbl 60 2 60 pport 2 vlan 2 ARP src 00:02:00:00:03:00 dst 00:02:00:00:02:00 3 50 2 vlan 2 dst 00:02:00:00:02:00 --> write group 0x02000001 goto tbl 60 2 60 1 pport 2 vlan 2 IP src 00:02:00:00:03:00 dst 00:02:00:00:02:00 proto 1 3 50 2 vlan 1 dst 00:02:00:00:03:00 --> write group 0x01000002 goto tbl 60 2 60 1 pport 1 vlan 1 IP src 00:02:00:00:02:00 dst 00:02:00:00:03:00 proto 1 2 60 pport 1 vlan 1 IPv6 src 00:02:00:00:02:00 dst 33:33:ff:00:00:01 proto 58 3 50 vlan 1 dst 33:33:ff:00:00:01 --> write group 0x31000000 goto tbl 60 2 60 pport 1 vlan 1 IPv6 src 00:02:00:00:02:00 dst 33:33:ff:00:02:00 proto 58 3 50 1 vlan 1 dst 33:33:ff:00:02:00 --> write group 0x31000000 goto tbl 60 1 60 173 pport 2 vlan 2 LLDP src <any> dst 01:80:c2:00:00:0e --> write group 0x02000000 1 60 6 pport 2 vlan 2 IPv6 src <any> dst <any> --> write group 0x02000000 1 60 174 pport 1 vlan 1 LLDP src <any> dst 01:80:c2:00:00:0e --> write group 0x01000000 1 60 174 pport 2 vlan 2 IP src <any> dst <any> --> write group 0x02000000 1 60 6 pport 1 vlan 1 IPv6 src <any> dst <any> --> write group 0x01000000 1 60 181 pport 2 vlan 2 ARP src <any> dst <any> --> write group 0x02000000 1 10 715 pport 2 --> apply new vlan 2 goto tbl 20 1 60 177 pport 1 vlan 1 ARP src <any> dst <any> --> write group 0x01000000 1 60 174 pport 1 vlan 1 IP src <any> dst <any> --> write group 0x01000000 1 10 717 pport 1 --> apply new vlan 1 goto tbl 20 1 0 1432 pport 0(0xffff) --> goto tbl 10 (qemu) info rocker-of-dpa-groups sw1 id (decode) --> buckets 0x32000001 (type L2 multicast vlan 2 index 1) --> groups [0x02000001,0x02000000] 0x02000001 (type L2 interface vlan 2 pport 1) --> pop vlan out pport 1 0x01000002 (type L2 interface vlan 1 pport 2) --> pop vlan out pport 2 0x02000000 (type L2 interface vlan 2 pport 0) --> pop vlan out pport 0 0x01000000 (type L2 interface vlan 1 pport 0) --> pop vlan out pport 0 0x31000000 (type L2 multicast vlan 1 index 0) --> groups [0x01000002,0x01000000] [Added "query-" prefixes to rocker.json commands as suggested by Eric Blake <eblake@redhat.com>. --Stefan] Signed-off-by: Scott Feldman <sfeldma@gmail.com> Signed-off-by: Jiri Pirko <jiri@resnulli.us> Message-id: 1433985681-56138-5-git-send-email-sfeldma@gmail.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-06-11 03:21:21 +02:00
}
return list;
}
rocker: add new rocker switch device Rocker is a simulated ethernet switch device. The device supports up to 62 front-panel ports and supports L2 switching and L3 routing functions, as well as L2/L3/L4 ACLs. The device presents a single PCI device for each switch, with a memory-mapped register space for device driver access. Rocker device is invoked with -device, for example a 4-port switch: -device rocker,name=sw1,len-ports=4,ports[0]=dev0,ports[1]=dev1, \ ports[2]=dev2,ports[3]=dev3 Each port is a netdev and can be paired with using -netdev id=<port name>. Signed-off-by: Scott Feldman <sfeldma@gmail.com> Signed-off-by: Jiri Pirko <jiri@resnulli.us> Acked-by: Scott Feldman <sfeldma@gmail.com> Acked-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David Ahern <dsahern@gmail.com> Message-id: 1426306173-24884-7-git-send-email-sfeldma@gmail.com rocker: fix clang compiler errors Consolidate all forward typedef declarations to rocker.h. Signed-off-by: David Ahern <dsahern@gmail.com> Acked-by: Scott Feldman <sfeldma@gmail.com> Acked-by: Jiri Pirko <jiri@resnulli.us> rocker: add support for flow modification We had support for flow add/del. This adds support for flow mod. I needed this for L3 support where an existing route is modified using NLM_F_REPLACE. For example: ip route add 12.0.0.0/30 nexthop via 11.0.0.1 dev swp1 ip route change 12.0.0.0/30 nexthop via 11.0.0.9 dev swp2 The first cmd adds the route. The second cmd changes the existing route by changing its nexthop info. In the device, a mod operation results in the matching flow enty being modified with the new settings. This is atomic to the device. Signed-off-by: Scott Feldman <sfeldma@gmail.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-03-14 05:09:30 +01:00
uint32_t rocker_fp_ports(Rocker *r)
{
return r->fp_ports;
}
static uint32_t rocker_get_pport_by_tx_ring(Rocker *r,
DescRing *ring)
{
return (desc_ring_index(ring) - 2) / 2 + 1;
}
static int tx_consume(Rocker *r, DescInfo *info)
{
PCIDevice *dev = PCI_DEVICE(r);
char *buf = desc_get_buf(info, true);
RockerTlv *tlv_frag;
RockerTlv *tlvs[ROCKER_TLV_TX_MAX + 1];
struct iovec iov[ROCKER_TX_FRAGS_MAX] = { { 0, }, };
uint32_t pport;
uint32_t port;
uint16_t tx_offload = ROCKER_TX_OFFLOAD_NONE;
uint16_t tx_l3_csum_off = 0;
uint16_t tx_tso_mss = 0;
uint16_t tx_tso_hdr_len = 0;
int iovcnt = 0;
int err = ROCKER_OK;
int rem;
int i;
if (!buf) {
return -ROCKER_ENXIO;
}
rocker_tlv_parse(tlvs, ROCKER_TLV_TX_MAX, buf, desc_tlv_size(info));
if (!tlvs[ROCKER_TLV_TX_FRAGS]) {
return -ROCKER_EINVAL;
}
pport = rocker_get_pport_by_tx_ring(r, desc_get_ring(info));
if (!fp_port_from_pport(pport, &port)) {
return -ROCKER_EINVAL;
}
if (tlvs[ROCKER_TLV_TX_OFFLOAD]) {
tx_offload = rocker_tlv_get_u8(tlvs[ROCKER_TLV_TX_OFFLOAD]);
}
switch (tx_offload) {
case ROCKER_TX_OFFLOAD_L3_CSUM:
if (!tlvs[ROCKER_TLV_TX_L3_CSUM_OFF]) {
return -ROCKER_EINVAL;
}
break;
rocker: add new rocker switch device Rocker is a simulated ethernet switch device. The device supports up to 62 front-panel ports and supports L2 switching and L3 routing functions, as well as L2/L3/L4 ACLs. The device presents a single PCI device for each switch, with a memory-mapped register space for device driver access. Rocker device is invoked with -device, for example a 4-port switch: -device rocker,name=sw1,len-ports=4,ports[0]=dev0,ports[1]=dev1, \ ports[2]=dev2,ports[3]=dev3 Each port is a netdev and can be paired with using -netdev id=<port name>. Signed-off-by: Scott Feldman <sfeldma@gmail.com> Signed-off-by: Jiri Pirko <jiri@resnulli.us> Acked-by: Scott Feldman <sfeldma@gmail.com> Acked-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David Ahern <dsahern@gmail.com> Message-id: 1426306173-24884-7-git-send-email-sfeldma@gmail.com rocker: fix clang compiler errors Consolidate all forward typedef declarations to rocker.h. Signed-off-by: David Ahern <dsahern@gmail.com> Acked-by: Scott Feldman <sfeldma@gmail.com> Acked-by: Jiri Pirko <jiri@resnulli.us> rocker: add support for flow modification We had support for flow add/del. This adds support for flow mod. I needed this for L3 support where an existing route is modified using NLM_F_REPLACE. For example: ip route add 12.0.0.0/30 nexthop via 11.0.0.1 dev swp1 ip route change 12.0.0.0/30 nexthop via 11.0.0.9 dev swp2 The first cmd adds the route. The second cmd changes the existing route by changing its nexthop info. In the device, a mod operation results in the matching flow enty being modified with the new settings. This is atomic to the device. Signed-off-by: Scott Feldman <sfeldma@gmail.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-03-14 05:09:30 +01:00
case ROCKER_TX_OFFLOAD_TSO:
if (!tlvs[ROCKER_TLV_TX_TSO_MSS] ||
!tlvs[ROCKER_TLV_TX_TSO_HDR_LEN]) {
return -ROCKER_EINVAL;
}
break;
rocker: add new rocker switch device Rocker is a simulated ethernet switch device. The device supports up to 62 front-panel ports and supports L2 switching and L3 routing functions, as well as L2/L3/L4 ACLs. The device presents a single PCI device for each switch, with a memory-mapped register space for device driver access. Rocker device is invoked with -device, for example a 4-port switch: -device rocker,name=sw1,len-ports=4,ports[0]=dev0,ports[1]=dev1, \ ports[2]=dev2,ports[3]=dev3 Each port is a netdev and can be paired with using -netdev id=<port name>. Signed-off-by: Scott Feldman <sfeldma@gmail.com> Signed-off-by: Jiri Pirko <jiri@resnulli.us> Acked-by: Scott Feldman <sfeldma@gmail.com> Acked-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David Ahern <dsahern@gmail.com> Message-id: 1426306173-24884-7-git-send-email-sfeldma@gmail.com rocker: fix clang compiler errors Consolidate all forward typedef declarations to rocker.h. Signed-off-by: David Ahern <dsahern@gmail.com> Acked-by: Scott Feldman <sfeldma@gmail.com> Acked-by: Jiri Pirko <jiri@resnulli.us> rocker: add support for flow modification We had support for flow add/del. This adds support for flow mod. I needed this for L3 support where an existing route is modified using NLM_F_REPLACE. For example: ip route add 12.0.0.0/30 nexthop via 11.0.0.1 dev swp1 ip route change 12.0.0.0/30 nexthop via 11.0.0.9 dev swp2 The first cmd adds the route. The second cmd changes the existing route by changing its nexthop info. In the device, a mod operation results in the matching flow enty being modified with the new settings. This is atomic to the device. Signed-off-by: Scott Feldman <sfeldma@gmail.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-03-14 05:09:30 +01:00
}
if (tlvs[ROCKER_TLV_TX_L3_CSUM_OFF]) {
tx_l3_csum_off = rocker_tlv_get_le16(tlvs[ROCKER_TLV_TX_L3_CSUM_OFF]);
qemu_log_mask(LOG_UNIMP, "rocker %s: L3 not implemented"
" (cksum off: %u)\n",
__func__, tx_l3_csum_off);
rocker: add new rocker switch device Rocker is a simulated ethernet switch device. The device supports up to 62 front-panel ports and supports L2 switching and L3 routing functions, as well as L2/L3/L4 ACLs. The device presents a single PCI device for each switch, with a memory-mapped register space for device driver access. Rocker device is invoked with -device, for example a 4-port switch: -device rocker,name=sw1,len-ports=4,ports[0]=dev0,ports[1]=dev1, \ ports[2]=dev2,ports[3]=dev3 Each port is a netdev and can be paired with using -netdev id=<port name>. Signed-off-by: Scott Feldman <sfeldma@gmail.com> Signed-off-by: Jiri Pirko <jiri@resnulli.us> Acked-by: Scott Feldman <sfeldma@gmail.com> Acked-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David Ahern <dsahern@gmail.com> Message-id: 1426306173-24884-7-git-send-email-sfeldma@gmail.com rocker: fix clang compiler errors Consolidate all forward typedef declarations to rocker.h. Signed-off-by: David Ahern <dsahern@gmail.com> Acked-by: Scott Feldman <sfeldma@gmail.com> Acked-by: Jiri Pirko <jiri@resnulli.us> rocker: add support for flow modification We had support for flow add/del. This adds support for flow mod. I needed this for L3 support where an existing route is modified using NLM_F_REPLACE. For example: ip route add 12.0.0.0/30 nexthop via 11.0.0.1 dev swp1 ip route change 12.0.0.0/30 nexthop via 11.0.0.9 dev swp2 The first cmd adds the route. The second cmd changes the existing route by changing its nexthop info. In the device, a mod operation results in the matching flow enty being modified with the new settings. This is atomic to the device. Signed-off-by: Scott Feldman <sfeldma@gmail.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-03-14 05:09:30 +01:00
}
if (tlvs[ROCKER_TLV_TX_TSO_MSS]) {
tx_tso_mss = rocker_tlv_get_le16(tlvs[ROCKER_TLV_TX_TSO_MSS]);
qemu_log_mask(LOG_UNIMP, "rocker %s: TSO not implemented (MSS: %u)\n",
__func__, tx_tso_mss);
rocker: add new rocker switch device Rocker is a simulated ethernet switch device. The device supports up to 62 front-panel ports and supports L2 switching and L3 routing functions, as well as L2/L3/L4 ACLs. The device presents a single PCI device for each switch, with a memory-mapped register space for device driver access. Rocker device is invoked with -device, for example a 4-port switch: -device rocker,name=sw1,len-ports=4,ports[0]=dev0,ports[1]=dev1, \ ports[2]=dev2,ports[3]=dev3 Each port is a netdev and can be paired with using -netdev id=<port name>. Signed-off-by: Scott Feldman <sfeldma@gmail.com> Signed-off-by: Jiri Pirko <jiri@resnulli.us> Acked-by: Scott Feldman <sfeldma@gmail.com> Acked-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David Ahern <dsahern@gmail.com> Message-id: 1426306173-24884-7-git-send-email-sfeldma@gmail.com rocker: fix clang compiler errors Consolidate all forward typedef declarations to rocker.h. Signed-off-by: David Ahern <dsahern@gmail.com> Acked-by: Scott Feldman <sfeldma@gmail.com> Acked-by: Jiri Pirko <jiri@resnulli.us> rocker: add support for flow modification We had support for flow add/del. This adds support for flow mod. I needed this for L3 support where an existing route is modified using NLM_F_REPLACE. For example: ip route add 12.0.0.0/30 nexthop via 11.0.0.1 dev swp1 ip route change 12.0.0.0/30 nexthop via 11.0.0.9 dev swp2 The first cmd adds the route. The second cmd changes the existing route by changing its nexthop info. In the device, a mod operation results in the matching flow enty being modified with the new settings. This is atomic to the device. Signed-off-by: Scott Feldman <sfeldma@gmail.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-03-14 05:09:30 +01:00
}
if (tlvs[ROCKER_TLV_TX_TSO_HDR_LEN]) {
tx_tso_hdr_len = rocker_tlv_get_le16(tlvs[ROCKER_TLV_TX_TSO_HDR_LEN]);
qemu_log_mask(LOG_UNIMP, "rocker %s: TSO not implemented"
" (hdr length: %u)\n",
__func__, tx_tso_hdr_len);
rocker: add new rocker switch device Rocker is a simulated ethernet switch device. The device supports up to 62 front-panel ports and supports L2 switching and L3 routing functions, as well as L2/L3/L4 ACLs. The device presents a single PCI device for each switch, with a memory-mapped register space for device driver access. Rocker device is invoked with -device, for example a 4-port switch: -device rocker,name=sw1,len-ports=4,ports[0]=dev0,ports[1]=dev1, \ ports[2]=dev2,ports[3]=dev3 Each port is a netdev and can be paired with using -netdev id=<port name>. Signed-off-by: Scott Feldman <sfeldma@gmail.com> Signed-off-by: Jiri Pirko <jiri@resnulli.us> Acked-by: Scott Feldman <sfeldma@gmail.com> Acked-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David Ahern <dsahern@gmail.com> Message-id: 1426306173-24884-7-git-send-email-sfeldma@gmail.com rocker: fix clang compiler errors Consolidate all forward typedef declarations to rocker.h. Signed-off-by: David Ahern <dsahern@gmail.com> Acked-by: Scott Feldman <sfeldma@gmail.com> Acked-by: Jiri Pirko <jiri@resnulli.us> rocker: add support for flow modification We had support for flow add/del. This adds support for flow mod. I needed this for L3 support where an existing route is modified using NLM_F_REPLACE. For example: ip route add 12.0.0.0/30 nexthop via 11.0.0.1 dev swp1 ip route change 12.0.0.0/30 nexthop via 11.0.0.9 dev swp2 The first cmd adds the route. The second cmd changes the existing route by changing its nexthop info. In the device, a mod operation results in the matching flow enty being modified with the new settings. This is atomic to the device. Signed-off-by: Scott Feldman <sfeldma@gmail.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-03-14 05:09:30 +01:00
}
rocker_tlv_for_each_nested(tlv_frag, tlvs[ROCKER_TLV_TX_FRAGS], rem) {
hwaddr frag_addr;
uint16_t frag_len;
if (rocker_tlv_type(tlv_frag) != ROCKER_TLV_TX_FRAG) {
err = -ROCKER_EINVAL;
goto err_bad_attr;
}
rocker_tlv_parse_nested(tlvs, ROCKER_TLV_TX_FRAG_ATTR_MAX, tlv_frag);
if (!tlvs[ROCKER_TLV_TX_FRAG_ATTR_ADDR] ||
!tlvs[ROCKER_TLV_TX_FRAG_ATTR_LEN]) {
err = -ROCKER_EINVAL;
goto err_bad_attr;
}
frag_addr = rocker_tlv_get_le64(tlvs[ROCKER_TLV_TX_FRAG_ATTR_ADDR]);
frag_len = rocker_tlv_get_le16(tlvs[ROCKER_TLV_TX_FRAG_ATTR_LEN]);
if (iovcnt >= ROCKER_TX_FRAGS_MAX) {
goto err_too_many_frags;
}
rocker: add new rocker switch device Rocker is a simulated ethernet switch device. The device supports up to 62 front-panel ports and supports L2 switching and L3 routing functions, as well as L2/L3/L4 ACLs. The device presents a single PCI device for each switch, with a memory-mapped register space for device driver access. Rocker device is invoked with -device, for example a 4-port switch: -device rocker,name=sw1,len-ports=4,ports[0]=dev0,ports[1]=dev1, \ ports[2]=dev2,ports[3]=dev3 Each port is a netdev and can be paired with using -netdev id=<port name>. Signed-off-by: Scott Feldman <sfeldma@gmail.com> Signed-off-by: Jiri Pirko <jiri@resnulli.us> Acked-by: Scott Feldman <sfeldma@gmail.com> Acked-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David Ahern <dsahern@gmail.com> Message-id: 1426306173-24884-7-git-send-email-sfeldma@gmail.com rocker: fix clang compiler errors Consolidate all forward typedef declarations to rocker.h. Signed-off-by: David Ahern <dsahern@gmail.com> Acked-by: Scott Feldman <sfeldma@gmail.com> Acked-by: Jiri Pirko <jiri@resnulli.us> rocker: add support for flow modification We had support for flow add/del. This adds support for flow mod. I needed this for L3 support where an existing route is modified using NLM_F_REPLACE. For example: ip route add 12.0.0.0/30 nexthop via 11.0.0.1 dev swp1 ip route change 12.0.0.0/30 nexthop via 11.0.0.9 dev swp2 The first cmd adds the route. The second cmd changes the existing route by changing its nexthop info. In the device, a mod operation results in the matching flow enty being modified with the new settings. This is atomic to the device. Signed-off-by: Scott Feldman <sfeldma@gmail.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-03-14 05:09:30 +01:00
iov[iovcnt].iov_len = frag_len;
iov[iovcnt].iov_base = g_malloc(frag_len);
pci_dma_read(dev, frag_addr, iov[iovcnt].iov_base,
iov[iovcnt].iov_len);
iovcnt++;
rocker: add new rocker switch device Rocker is a simulated ethernet switch device. The device supports up to 62 front-panel ports and supports L2 switching and L3 routing functions, as well as L2/L3/L4 ACLs. The device presents a single PCI device for each switch, with a memory-mapped register space for device driver access. Rocker device is invoked with -device, for example a 4-port switch: -device rocker,name=sw1,len-ports=4,ports[0]=dev0,ports[1]=dev1, \ ports[2]=dev2,ports[3]=dev3 Each port is a netdev and can be paired with using -netdev id=<port name>. Signed-off-by: Scott Feldman <sfeldma@gmail.com> Signed-off-by: Jiri Pirko <jiri@resnulli.us> Acked-by: Scott Feldman <sfeldma@gmail.com> Acked-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David Ahern <dsahern@gmail.com> Message-id: 1426306173-24884-7-git-send-email-sfeldma@gmail.com rocker: fix clang compiler errors Consolidate all forward typedef declarations to rocker.h. Signed-off-by: David Ahern <dsahern@gmail.com> Acked-by: Scott Feldman <sfeldma@gmail.com> Acked-by: Jiri Pirko <jiri@resnulli.us> rocker: add support for flow modification We had support for flow add/del. This adds support for flow mod. I needed this for L3 support where an existing route is modified using NLM_F_REPLACE. For example: ip route add 12.0.0.0/30 nexthop via 11.0.0.1 dev swp1 ip route change 12.0.0.0/30 nexthop via 11.0.0.9 dev swp2 The first cmd adds the route. The second cmd changes the existing route by changing its nexthop info. In the device, a mod operation results in the matching flow enty being modified with the new settings. This is atomic to the device. Signed-off-by: Scott Feldman <sfeldma@gmail.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-03-14 05:09:30 +01:00
}
err = fp_port_eg(r->fp_port[port], iov, iovcnt);
err_too_many_frags:
err_bad_attr:
for (i = 0; i < ROCKER_TX_FRAGS_MAX; i++) {
g_free(iov[i].iov_base);
rocker: add new rocker switch device Rocker is a simulated ethernet switch device. The device supports up to 62 front-panel ports and supports L2 switching and L3 routing functions, as well as L2/L3/L4 ACLs. The device presents a single PCI device for each switch, with a memory-mapped register space for device driver access. Rocker device is invoked with -device, for example a 4-port switch: -device rocker,name=sw1,len-ports=4,ports[0]=dev0,ports[1]=dev1, \ ports[2]=dev2,ports[3]=dev3 Each port is a netdev and can be paired with using -netdev id=<port name>. Signed-off-by: Scott Feldman <sfeldma@gmail.com> Signed-off-by: Jiri Pirko <jiri@resnulli.us> Acked-by: Scott Feldman <sfeldma@gmail.com> Acked-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David Ahern <dsahern@gmail.com> Message-id: 1426306173-24884-7-git-send-email-sfeldma@gmail.com rocker: fix clang compiler errors Consolidate all forward typedef declarations to rocker.h. Signed-off-by: David Ahern <dsahern@gmail.com> Acked-by: Scott Feldman <sfeldma@gmail.com> Acked-by: Jiri Pirko <jiri@resnulli.us> rocker: add support for flow modification We had support for flow add/del. This adds support for flow mod. I needed this for L3 support where an existing route is modified using NLM_F_REPLACE. For example: ip route add 12.0.0.0/30 nexthop via 11.0.0.1 dev swp1 ip route change 12.0.0.0/30 nexthop via 11.0.0.9 dev swp2 The first cmd adds the route. The second cmd changes the existing route by changing its nexthop info. In the device, a mod operation results in the matching flow enty being modified with the new settings. This is atomic to the device. Signed-off-by: Scott Feldman <sfeldma@gmail.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-03-14 05:09:30 +01:00
}
return err;
}
static int cmd_get_port_settings(Rocker *r,
DescInfo *info, char *buf,
RockerTlv *cmd_info_tlv)
{
RockerTlv *tlvs[ROCKER_TLV_CMD_PORT_SETTINGS_MAX + 1];
RockerTlv *nest;
FpPort *fp_port;
uint32_t pport;
uint32_t port;
uint32_t speed;
uint8_t duplex;
uint8_t autoneg;
uint8_t learning;
char *phys_name;
rocker: add new rocker switch device Rocker is a simulated ethernet switch device. The device supports up to 62 front-panel ports and supports L2 switching and L3 routing functions, as well as L2/L3/L4 ACLs. The device presents a single PCI device for each switch, with a memory-mapped register space for device driver access. Rocker device is invoked with -device, for example a 4-port switch: -device rocker,name=sw1,len-ports=4,ports[0]=dev0,ports[1]=dev1, \ ports[2]=dev2,ports[3]=dev3 Each port is a netdev and can be paired with using -netdev id=<port name>. Signed-off-by: Scott Feldman <sfeldma@gmail.com> Signed-off-by: Jiri Pirko <jiri@resnulli.us> Acked-by: Scott Feldman <sfeldma@gmail.com> Acked-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David Ahern <dsahern@gmail.com> Message-id: 1426306173-24884-7-git-send-email-sfeldma@gmail.com rocker: fix clang compiler errors Consolidate all forward typedef declarations to rocker.h. Signed-off-by: David Ahern <dsahern@gmail.com> Acked-by: Scott Feldman <sfeldma@gmail.com> Acked-by: Jiri Pirko <jiri@resnulli.us> rocker: add support for flow modification We had support for flow add/del. This adds support for flow mod. I needed this for L3 support where an existing route is modified using NLM_F_REPLACE. For example: ip route add 12.0.0.0/30 nexthop via 11.0.0.1 dev swp1 ip route change 12.0.0.0/30 nexthop via 11.0.0.9 dev swp2 The first cmd adds the route. The second cmd changes the existing route by changing its nexthop info. In the device, a mod operation results in the matching flow enty being modified with the new settings. This is atomic to the device. Signed-off-by: Scott Feldman <sfeldma@gmail.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-03-14 05:09:30 +01:00
MACAddr macaddr;
enum rocker_world_type mode;
size_t tlv_size;
int pos;
int err;
rocker_tlv_parse_nested(tlvs, ROCKER_TLV_CMD_PORT_SETTINGS_MAX,
cmd_info_tlv);
if (!tlvs[ROCKER_TLV_CMD_PORT_SETTINGS_PPORT]) {
return -ROCKER_EINVAL;
}
pport = rocker_tlv_get_le32(tlvs[ROCKER_TLV_CMD_PORT_SETTINGS_PPORT]);
if (!fp_port_from_pport(pport, &port)) {
return -ROCKER_EINVAL;
}
fp_port = r->fp_port[port];
err = fp_port_get_settings(fp_port, &speed, &duplex, &autoneg);
if (err) {
return err;
}
fp_port_get_macaddr(fp_port, &macaddr);
mode = world_type(fp_port_get_world(fp_port));
learning = fp_port_get_learning(fp_port);
phys_name = fp_port_get_name(fp_port);
rocker: add new rocker switch device Rocker is a simulated ethernet switch device. The device supports up to 62 front-panel ports and supports L2 switching and L3 routing functions, as well as L2/L3/L4 ACLs. The device presents a single PCI device for each switch, with a memory-mapped register space for device driver access. Rocker device is invoked with -device, for example a 4-port switch: -device rocker,name=sw1,len-ports=4,ports[0]=dev0,ports[1]=dev1, \ ports[2]=dev2,ports[3]=dev3 Each port is a netdev and can be paired with using -netdev id=<port name>. Signed-off-by: Scott Feldman <sfeldma@gmail.com> Signed-off-by: Jiri Pirko <jiri@resnulli.us> Acked-by: Scott Feldman <sfeldma@gmail.com> Acked-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David Ahern <dsahern@gmail.com> Message-id: 1426306173-24884-7-git-send-email-sfeldma@gmail.com rocker: fix clang compiler errors Consolidate all forward typedef declarations to rocker.h. Signed-off-by: David Ahern <dsahern@gmail.com> Acked-by: Scott Feldman <sfeldma@gmail.com> Acked-by: Jiri Pirko <jiri@resnulli.us> rocker: add support for flow modification We had support for flow add/del. This adds support for flow mod. I needed this for L3 support where an existing route is modified using NLM_F_REPLACE. For example: ip route add 12.0.0.0/30 nexthop via 11.0.0.1 dev swp1 ip route change 12.0.0.0/30 nexthop via 11.0.0.9 dev swp2 The first cmd adds the route. The second cmd changes the existing route by changing its nexthop info. In the device, a mod operation results in the matching flow enty being modified with the new settings. This is atomic to the device. Signed-off-by: Scott Feldman <sfeldma@gmail.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-03-14 05:09:30 +01:00
tlv_size = rocker_tlv_total_size(0) + /* nest */
rocker_tlv_total_size(sizeof(uint32_t)) + /* pport */
rocker_tlv_total_size(sizeof(uint32_t)) + /* speed */
rocker_tlv_total_size(sizeof(uint8_t)) + /* duplex */
rocker_tlv_total_size(sizeof(uint8_t)) + /* autoneg */
rocker_tlv_total_size(sizeof(macaddr.a)) + /* macaddr */
rocker_tlv_total_size(sizeof(uint8_t)) + /* mode */
rocker_tlv_total_size(sizeof(uint8_t)) + /* learning */
rocker_tlv_total_size(strlen(phys_name));
rocker: add new rocker switch device Rocker is a simulated ethernet switch device. The device supports up to 62 front-panel ports and supports L2 switching and L3 routing functions, as well as L2/L3/L4 ACLs. The device presents a single PCI device for each switch, with a memory-mapped register space for device driver access. Rocker device is invoked with -device, for example a 4-port switch: -device rocker,name=sw1,len-ports=4,ports[0]=dev0,ports[1]=dev1, \ ports[2]=dev2,ports[3]=dev3 Each port is a netdev and can be paired with using -netdev id=<port name>. Signed-off-by: Scott Feldman <sfeldma@gmail.com> Signed-off-by: Jiri Pirko <jiri@resnulli.us> Acked-by: Scott Feldman <sfeldma@gmail.com> Acked-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David Ahern <dsahern@gmail.com> Message-id: 1426306173-24884-7-git-send-email-sfeldma@gmail.com rocker: fix clang compiler errors Consolidate all forward typedef declarations to rocker.h. Signed-off-by: David Ahern <dsahern@gmail.com> Acked-by: Scott Feldman <sfeldma@gmail.com> Acked-by: Jiri Pirko <jiri@resnulli.us> rocker: add support for flow modification We had support for flow add/del. This adds support for flow mod. I needed this for L3 support where an existing route is modified using NLM_F_REPLACE. For example: ip route add 12.0.0.0/30 nexthop via 11.0.0.1 dev swp1 ip route change 12.0.0.0/30 nexthop via 11.0.0.9 dev swp2 The first cmd adds the route. The second cmd changes the existing route by changing its nexthop info. In the device, a mod operation results in the matching flow enty being modified with the new settings. This is atomic to the device. Signed-off-by: Scott Feldman <sfeldma@gmail.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-03-14 05:09:30 +01:00
if (tlv_size > desc_buf_size(info)) {
return -ROCKER_EMSGSIZE;
}
pos = 0;
nest = rocker_tlv_nest_start(buf, &pos, ROCKER_TLV_CMD_INFO);
rocker_tlv_put_le32(buf, &pos, ROCKER_TLV_CMD_PORT_SETTINGS_PPORT, pport);
rocker_tlv_put_le32(buf, &pos, ROCKER_TLV_CMD_PORT_SETTINGS_SPEED, speed);
rocker_tlv_put_u8(buf, &pos, ROCKER_TLV_CMD_PORT_SETTINGS_DUPLEX, duplex);
rocker_tlv_put_u8(buf, &pos, ROCKER_TLV_CMD_PORT_SETTINGS_AUTONEG, autoneg);
rocker_tlv_put(buf, &pos, ROCKER_TLV_CMD_PORT_SETTINGS_MACADDR,
sizeof(macaddr.a), macaddr.a);
rocker_tlv_put_u8(buf, &pos, ROCKER_TLV_CMD_PORT_SETTINGS_MODE, mode);
rocker_tlv_put_u8(buf, &pos, ROCKER_TLV_CMD_PORT_SETTINGS_LEARNING,
learning);
rocker_tlv_put(buf, &pos, ROCKER_TLV_CMD_PORT_SETTINGS_PHYS_NAME,
strlen(phys_name), phys_name);
rocker: add new rocker switch device Rocker is a simulated ethernet switch device. The device supports up to 62 front-panel ports and supports L2 switching and L3 routing functions, as well as L2/L3/L4 ACLs. The device presents a single PCI device for each switch, with a memory-mapped register space for device driver access. Rocker device is invoked with -device, for example a 4-port switch: -device rocker,name=sw1,len-ports=4,ports[0]=dev0,ports[1]=dev1, \ ports[2]=dev2,ports[3]=dev3 Each port is a netdev and can be paired with using -netdev id=<port name>. Signed-off-by: Scott Feldman <sfeldma@gmail.com> Signed-off-by: Jiri Pirko <jiri@resnulli.us> Acked-by: Scott Feldman <sfeldma@gmail.com> Acked-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David Ahern <dsahern@gmail.com> Message-id: 1426306173-24884-7-git-send-email-sfeldma@gmail.com rocker: fix clang compiler errors Consolidate all forward typedef declarations to rocker.h. Signed-off-by: David Ahern <dsahern@gmail.com> Acked-by: Scott Feldman <sfeldma@gmail.com> Acked-by: Jiri Pirko <jiri@resnulli.us> rocker: add support for flow modification We had support for flow add/del. This adds support for flow mod. I needed this for L3 support where an existing route is modified using NLM_F_REPLACE. For example: ip route add 12.0.0.0/30 nexthop via 11.0.0.1 dev swp1 ip route change 12.0.0.0/30 nexthop via 11.0.0.9 dev swp2 The first cmd adds the route. The second cmd changes the existing route by changing its nexthop info. In the device, a mod operation results in the matching flow enty being modified with the new settings. This is atomic to the device. Signed-off-by: Scott Feldman <sfeldma@gmail.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-03-14 05:09:30 +01:00
rocker_tlv_nest_end(buf, &pos, nest);
return desc_set_buf(info, tlv_size);
}
static int cmd_set_port_settings(Rocker *r,
RockerTlv *cmd_info_tlv)
{
RockerTlv *tlvs[ROCKER_TLV_CMD_PORT_SETTINGS_MAX + 1];
FpPort *fp_port;
uint32_t pport;
uint32_t port;
uint32_t speed;
uint8_t duplex;
uint8_t autoneg;
uint8_t learning;
MACAddr macaddr;
enum rocker_world_type mode;
int err;
rocker_tlv_parse_nested(tlvs, ROCKER_TLV_CMD_PORT_SETTINGS_MAX,
cmd_info_tlv);
if (!tlvs[ROCKER_TLV_CMD_PORT_SETTINGS_PPORT]) {
return -ROCKER_EINVAL;
}
pport = rocker_tlv_get_le32(tlvs[ROCKER_TLV_CMD_PORT_SETTINGS_PPORT]);
if (!fp_port_from_pport(pport, &port)) {
return -ROCKER_EINVAL;
}
fp_port = r->fp_port[port];
if (tlvs[ROCKER_TLV_CMD_PORT_SETTINGS_SPEED] &&
tlvs[ROCKER_TLV_CMD_PORT_SETTINGS_DUPLEX] &&
tlvs[ROCKER_TLV_CMD_PORT_SETTINGS_AUTONEG]) {
speed = rocker_tlv_get_le32(tlvs[ROCKER_TLV_CMD_PORT_SETTINGS_SPEED]);
duplex = rocker_tlv_get_u8(tlvs[ROCKER_TLV_CMD_PORT_SETTINGS_DUPLEX]);
autoneg = rocker_tlv_get_u8(tlvs[ROCKER_TLV_CMD_PORT_SETTINGS_AUTONEG]);
err = fp_port_set_settings(fp_port, speed, duplex, autoneg);
if (err) {
return err;
}
}
if (tlvs[ROCKER_TLV_CMD_PORT_SETTINGS_MACADDR]) {
if (rocker_tlv_len(tlvs[ROCKER_TLV_CMD_PORT_SETTINGS_MACADDR]) !=
sizeof(macaddr.a)) {
return -ROCKER_EINVAL;
}
memcpy(macaddr.a,
rocker_tlv_data(tlvs[ROCKER_TLV_CMD_PORT_SETTINGS_MACADDR]),
sizeof(macaddr.a));
fp_port_set_macaddr(fp_port, &macaddr);
}
if (tlvs[ROCKER_TLV_CMD_PORT_SETTINGS_MODE]) {
mode = rocker_tlv_get_u8(tlvs[ROCKER_TLV_CMD_PORT_SETTINGS_MODE]);
if (mode >= ROCKER_WORLD_TYPE_MAX) {
return -ROCKER_EINVAL;
}
/* We don't support world change. */
if (!fp_port_check_world(fp_port, r->worlds[mode])) {
return -ROCKER_EINVAL;
}
rocker: add new rocker switch device Rocker is a simulated ethernet switch device. The device supports up to 62 front-panel ports and supports L2 switching and L3 routing functions, as well as L2/L3/L4 ACLs. The device presents a single PCI device for each switch, with a memory-mapped register space for device driver access. Rocker device is invoked with -device, for example a 4-port switch: -device rocker,name=sw1,len-ports=4,ports[0]=dev0,ports[1]=dev1, \ ports[2]=dev2,ports[3]=dev3 Each port is a netdev and can be paired with using -netdev id=<port name>. Signed-off-by: Scott Feldman <sfeldma@gmail.com> Signed-off-by: Jiri Pirko <jiri@resnulli.us> Acked-by: Scott Feldman <sfeldma@gmail.com> Acked-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David Ahern <dsahern@gmail.com> Message-id: 1426306173-24884-7-git-send-email-sfeldma@gmail.com rocker: fix clang compiler errors Consolidate all forward typedef declarations to rocker.h. Signed-off-by: David Ahern <dsahern@gmail.com> Acked-by: Scott Feldman <sfeldma@gmail.com> Acked-by: Jiri Pirko <jiri@resnulli.us> rocker: add support for flow modification We had support for flow add/del. This adds support for flow mod. I needed this for L3 support where an existing route is modified using NLM_F_REPLACE. For example: ip route add 12.0.0.0/30 nexthop via 11.0.0.1 dev swp1 ip route change 12.0.0.0/30 nexthop via 11.0.0.9 dev swp2 The first cmd adds the route. The second cmd changes the existing route by changing its nexthop info. In the device, a mod operation results in the matching flow enty being modified with the new settings. This is atomic to the device. Signed-off-by: Scott Feldman <sfeldma@gmail.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-03-14 05:09:30 +01:00
}
if (tlvs[ROCKER_TLV_CMD_PORT_SETTINGS_LEARNING]) {
learning =
rocker_tlv_get_u8(tlvs[ROCKER_TLV_CMD_PORT_SETTINGS_LEARNING]);
fp_port_set_learning(fp_port, learning);
}
return ROCKER_OK;
}
static int cmd_consume(Rocker *r, DescInfo *info)
{
char *buf = desc_get_buf(info, false);
RockerTlv *tlvs[ROCKER_TLV_CMD_MAX + 1];
RockerTlv *info_tlv;
World *world;
uint16_t cmd;
int err;
if (!buf) {
return -ROCKER_ENXIO;
}
rocker_tlv_parse(tlvs, ROCKER_TLV_CMD_MAX, buf, desc_tlv_size(info));
if (!tlvs[ROCKER_TLV_CMD_TYPE] || !tlvs[ROCKER_TLV_CMD_INFO]) {
return -ROCKER_EINVAL;
}
cmd = rocker_tlv_get_le16(tlvs[ROCKER_TLV_CMD_TYPE]);
info_tlv = tlvs[ROCKER_TLV_CMD_INFO];
/* This might be reworked to something like this:
* Every world will have an array of command handlers from
* ROCKER_TLV_CMD_TYPE_UNSPEC to ROCKER_TLV_CMD_TYPE_MAX. There is
* up to each world to implement whatever command it want.
* It can reference "generic" commands as cmd_set_port_settings or
* cmd_get_port_settings
*/
switch (cmd) {
case ROCKER_TLV_CMD_TYPE_OF_DPA_FLOW_ADD:
case ROCKER_TLV_CMD_TYPE_OF_DPA_FLOW_MOD:
case ROCKER_TLV_CMD_TYPE_OF_DPA_FLOW_DEL:
case ROCKER_TLV_CMD_TYPE_OF_DPA_FLOW_GET_STATS:
case ROCKER_TLV_CMD_TYPE_OF_DPA_GROUP_ADD:
case ROCKER_TLV_CMD_TYPE_OF_DPA_GROUP_MOD:
case ROCKER_TLV_CMD_TYPE_OF_DPA_GROUP_DEL:
case ROCKER_TLV_CMD_TYPE_OF_DPA_GROUP_GET_STATS:
world = r->worlds[ROCKER_WORLD_TYPE_OF_DPA];
err = world_do_cmd(world, info, buf, cmd, info_tlv);
break;
case ROCKER_TLV_CMD_TYPE_GET_PORT_SETTINGS:
err = cmd_get_port_settings(r, info, buf, info_tlv);
break;
case ROCKER_TLV_CMD_TYPE_SET_PORT_SETTINGS:
err = cmd_set_port_settings(r, info_tlv);
break;
default:
err = -ROCKER_EINVAL;
break;
}
return err;
}
static void rocker_msix_irq(Rocker *r, unsigned vector)
{
PCIDevice *dev = PCI_DEVICE(r);
DPRINTF("MSI-X notify request for vector %d\n", vector);
if (vector >= ROCKER_MSIX_VEC_COUNT(r->fp_ports)) {
DPRINTF("incorrect vector %d\n", vector);
return;
}
msix_notify(dev, vector);
}
int rocker_event_link_changed(Rocker *r, uint32_t pport, bool link_up)
{
DescRing *ring = r->rings[ROCKER_RING_EVENT];
DescInfo *info = desc_ring_fetch_desc(ring);
RockerTlv *nest;
char *buf;
size_t tlv_size;
int pos;
int err;
if (!info) {
return -ROCKER_ENOBUFS;
}
tlv_size = rocker_tlv_total_size(sizeof(uint16_t)) + /* event type */
rocker_tlv_total_size(0) + /* nest */
rocker_tlv_total_size(sizeof(uint32_t)) + /* pport */
rocker_tlv_total_size(sizeof(uint8_t)); /* link up */
if (tlv_size > desc_buf_size(info)) {
err = -ROCKER_EMSGSIZE;
goto err_too_big;
}
buf = desc_get_buf(info, false);
if (!buf) {
err = -ROCKER_ENOMEM;
goto err_no_mem;
}
pos = 0;
rocker_tlv_put_le32(buf, &pos, ROCKER_TLV_EVENT_TYPE,
ROCKER_TLV_EVENT_TYPE_LINK_CHANGED);
nest = rocker_tlv_nest_start(buf, &pos, ROCKER_TLV_EVENT_INFO);
rocker_tlv_put_le32(buf, &pos, ROCKER_TLV_EVENT_LINK_CHANGED_PPORT, pport);
rocker_tlv_put_u8(buf, &pos, ROCKER_TLV_EVENT_LINK_CHANGED_LINKUP,
link_up ? 1 : 0);
rocker_tlv_nest_end(buf, &pos, nest);
err = desc_set_buf(info, tlv_size);
err_too_big:
err_no_mem:
if (desc_ring_post_desc(ring, err)) {
rocker_msix_irq(r, ROCKER_MSIX_VEC_EVENT);
}
return err;
}
int rocker_event_mac_vlan_seen(Rocker *r, uint32_t pport, uint8_t *addr,
uint16_t vlan_id)
{
DescRing *ring = r->rings[ROCKER_RING_EVENT];
DescInfo *info;
FpPort *fp_port;
uint32_t port;
RockerTlv *nest;
char *buf;
size_t tlv_size;
int pos;
int err;
if (!fp_port_from_pport(pport, &port)) {
return -ROCKER_EINVAL;
}
fp_port = r->fp_port[port];
if (!fp_port_get_learning(fp_port)) {
return ROCKER_OK;
}
info = desc_ring_fetch_desc(ring);
if (!info) {
return -ROCKER_ENOBUFS;
}
tlv_size = rocker_tlv_total_size(sizeof(uint16_t)) + /* event type */
rocker_tlv_total_size(0) + /* nest */
rocker_tlv_total_size(sizeof(uint32_t)) + /* pport */
rocker_tlv_total_size(ETH_ALEN) + /* mac addr */
rocker_tlv_total_size(sizeof(uint16_t)); /* vlan_id */
if (tlv_size > desc_buf_size(info)) {
err = -ROCKER_EMSGSIZE;
goto err_too_big;
}
buf = desc_get_buf(info, false);
if (!buf) {
err = -ROCKER_ENOMEM;
goto err_no_mem;
}
pos = 0;
rocker_tlv_put_le32(buf, &pos, ROCKER_TLV_EVENT_TYPE,
ROCKER_TLV_EVENT_TYPE_MAC_VLAN_SEEN);
nest = rocker_tlv_nest_start(buf, &pos, ROCKER_TLV_EVENT_INFO);
rocker_tlv_put_le32(buf, &pos, ROCKER_TLV_EVENT_MAC_VLAN_PPORT, pport);
rocker_tlv_put(buf, &pos, ROCKER_TLV_EVENT_MAC_VLAN_MAC, ETH_ALEN, addr);
rocker_tlv_put_u16(buf, &pos, ROCKER_TLV_EVENT_MAC_VLAN_VLAN_ID, vlan_id);
rocker_tlv_nest_end(buf, &pos, nest);
err = desc_set_buf(info, tlv_size);
err_too_big:
err_no_mem:
if (desc_ring_post_desc(ring, err)) {
rocker_msix_irq(r, ROCKER_MSIX_VEC_EVENT);
}
return err;
}
static DescRing *rocker_get_rx_ring_by_pport(Rocker *r,
uint32_t pport)
{
return r->rings[(pport - 1) * 2 + 3];
}
int rx_produce(World *world, uint32_t pport,
const struct iovec *iov, int iovcnt, uint8_t copy_to_cpu)
rocker: add new rocker switch device Rocker is a simulated ethernet switch device. The device supports up to 62 front-panel ports and supports L2 switching and L3 routing functions, as well as L2/L3/L4 ACLs. The device presents a single PCI device for each switch, with a memory-mapped register space for device driver access. Rocker device is invoked with -device, for example a 4-port switch: -device rocker,name=sw1,len-ports=4,ports[0]=dev0,ports[1]=dev1, \ ports[2]=dev2,ports[3]=dev3 Each port is a netdev and can be paired with using -netdev id=<port name>. Signed-off-by: Scott Feldman <sfeldma@gmail.com> Signed-off-by: Jiri Pirko <jiri@resnulli.us> Acked-by: Scott Feldman <sfeldma@gmail.com> Acked-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David Ahern <dsahern@gmail.com> Message-id: 1426306173-24884-7-git-send-email-sfeldma@gmail.com rocker: fix clang compiler errors Consolidate all forward typedef declarations to rocker.h. Signed-off-by: David Ahern <dsahern@gmail.com> Acked-by: Scott Feldman <sfeldma@gmail.com> Acked-by: Jiri Pirko <jiri@resnulli.us> rocker: add support for flow modification We had support for flow add/del. This adds support for flow mod. I needed this for L3 support where an existing route is modified using NLM_F_REPLACE. For example: ip route add 12.0.0.0/30 nexthop via 11.0.0.1 dev swp1 ip route change 12.0.0.0/30 nexthop via 11.0.0.9 dev swp2 The first cmd adds the route. The second cmd changes the existing route by changing its nexthop info. In the device, a mod operation results in the matching flow enty being modified with the new settings. This is atomic to the device. Signed-off-by: Scott Feldman <sfeldma@gmail.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-03-14 05:09:30 +01:00
{
Rocker *r = world_rocker(world);
PCIDevice *dev = (PCIDevice *)r;
DescRing *ring = rocker_get_rx_ring_by_pport(r, pport);
DescInfo *info = desc_ring_fetch_desc(ring);
char *data;
size_t data_size = iov_size(iov, iovcnt);
char *buf;
uint16_t rx_flags = 0;
uint16_t rx_csum = 0;
size_t tlv_size;
RockerTlv *tlvs[ROCKER_TLV_RX_MAX + 1];
hwaddr frag_addr;
uint16_t frag_max_len;
int pos;
int err;
if (!info) {
return -ROCKER_ENOBUFS;
}
buf = desc_get_buf(info, false);
if (!buf) {
err = -ROCKER_ENXIO;
goto out;
}
rocker_tlv_parse(tlvs, ROCKER_TLV_RX_MAX, buf, desc_tlv_size(info));
if (!tlvs[ROCKER_TLV_RX_FRAG_ADDR] ||
!tlvs[ROCKER_TLV_RX_FRAG_MAX_LEN]) {
err = -ROCKER_EINVAL;
goto out;
}
frag_addr = rocker_tlv_get_le64(tlvs[ROCKER_TLV_RX_FRAG_ADDR]);
frag_max_len = rocker_tlv_get_le16(tlvs[ROCKER_TLV_RX_FRAG_MAX_LEN]);
if (data_size > frag_max_len) {
err = -ROCKER_EMSGSIZE;
goto out;
}
if (copy_to_cpu) {
rx_flags |= ROCKER_RX_FLAGS_FWD_OFFLOAD;
}
rocker: add new rocker switch device Rocker is a simulated ethernet switch device. The device supports up to 62 front-panel ports and supports L2 switching and L3 routing functions, as well as L2/L3/L4 ACLs. The device presents a single PCI device for each switch, with a memory-mapped register space for device driver access. Rocker device is invoked with -device, for example a 4-port switch: -device rocker,name=sw1,len-ports=4,ports[0]=dev0,ports[1]=dev1, \ ports[2]=dev2,ports[3]=dev3 Each port is a netdev and can be paired with using -netdev id=<port name>. Signed-off-by: Scott Feldman <sfeldma@gmail.com> Signed-off-by: Jiri Pirko <jiri@resnulli.us> Acked-by: Scott Feldman <sfeldma@gmail.com> Acked-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David Ahern <dsahern@gmail.com> Message-id: 1426306173-24884-7-git-send-email-sfeldma@gmail.com rocker: fix clang compiler errors Consolidate all forward typedef declarations to rocker.h. Signed-off-by: David Ahern <dsahern@gmail.com> Acked-by: Scott Feldman <sfeldma@gmail.com> Acked-by: Jiri Pirko <jiri@resnulli.us> rocker: add support for flow modification We had support for flow add/del. This adds support for flow mod. I needed this for L3 support where an existing route is modified using NLM_F_REPLACE. For example: ip route add 12.0.0.0/30 nexthop via 11.0.0.1 dev swp1 ip route change 12.0.0.0/30 nexthop via 11.0.0.9 dev swp2 The first cmd adds the route. The second cmd changes the existing route by changing its nexthop info. In the device, a mod operation results in the matching flow enty being modified with the new settings. This is atomic to the device. Signed-off-by: Scott Feldman <sfeldma@gmail.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-03-14 05:09:30 +01:00
/* XXX calc rx flags/csum */
tlv_size = rocker_tlv_total_size(sizeof(uint16_t)) + /* flags */
rocker_tlv_total_size(sizeof(uint16_t)) + /* scum */
rocker_tlv_total_size(sizeof(uint64_t)) + /* frag addr */
rocker_tlv_total_size(sizeof(uint16_t)) + /* frag max len */
rocker_tlv_total_size(sizeof(uint16_t)); /* frag len */
if (tlv_size > desc_buf_size(info)) {
err = -ROCKER_EMSGSIZE;
goto out;
}
/* TODO:
* iov dma write can be optimized in similar way e1000 does it in
* e1000_receive_iov. But maybe if would make sense to introduce
* generic helper iov_dma_write.
*/
data = g_malloc(data_size);
rocker: add new rocker switch device Rocker is a simulated ethernet switch device. The device supports up to 62 front-panel ports and supports L2 switching and L3 routing functions, as well as L2/L3/L4 ACLs. The device presents a single PCI device for each switch, with a memory-mapped register space for device driver access. Rocker device is invoked with -device, for example a 4-port switch: -device rocker,name=sw1,len-ports=4,ports[0]=dev0,ports[1]=dev1, \ ports[2]=dev2,ports[3]=dev3 Each port is a netdev and can be paired with using -netdev id=<port name>. Signed-off-by: Scott Feldman <sfeldma@gmail.com> Signed-off-by: Jiri Pirko <jiri@resnulli.us> Acked-by: Scott Feldman <sfeldma@gmail.com> Acked-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David Ahern <dsahern@gmail.com> Message-id: 1426306173-24884-7-git-send-email-sfeldma@gmail.com rocker: fix clang compiler errors Consolidate all forward typedef declarations to rocker.h. Signed-off-by: David Ahern <dsahern@gmail.com> Acked-by: Scott Feldman <sfeldma@gmail.com> Acked-by: Jiri Pirko <jiri@resnulli.us> rocker: add support for flow modification We had support for flow add/del. This adds support for flow mod. I needed this for L3 support where an existing route is modified using NLM_F_REPLACE. For example: ip route add 12.0.0.0/30 nexthop via 11.0.0.1 dev swp1 ip route change 12.0.0.0/30 nexthop via 11.0.0.9 dev swp2 The first cmd adds the route. The second cmd changes the existing route by changing its nexthop info. In the device, a mod operation results in the matching flow enty being modified with the new settings. This is atomic to the device. Signed-off-by: Scott Feldman <sfeldma@gmail.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-03-14 05:09:30 +01:00
iov_to_buf(iov, iovcnt, 0, data, data_size);
pci_dma_write(dev, frag_addr, data, data_size);
g_free(data);
pos = 0;
rocker_tlv_put_le16(buf, &pos, ROCKER_TLV_RX_FLAGS, rx_flags);
rocker_tlv_put_le16(buf, &pos, ROCKER_TLV_RX_CSUM, rx_csum);
rocker_tlv_put_le64(buf, &pos, ROCKER_TLV_RX_FRAG_ADDR, frag_addr);
rocker_tlv_put_le16(buf, &pos, ROCKER_TLV_RX_FRAG_MAX_LEN, frag_max_len);
rocker_tlv_put_le16(buf, &pos, ROCKER_TLV_RX_FRAG_LEN, data_size);
err = desc_set_buf(info, tlv_size);
out:
if (desc_ring_post_desc(ring, err)) {
rocker_msix_irq(r, ROCKER_MSIX_VEC_RX(pport - 1));
}
return err;
}
int rocker_port_eg(Rocker *r, uint32_t pport,
const struct iovec *iov, int iovcnt)
{
FpPort *fp_port;
uint32_t port;
if (!fp_port_from_pport(pport, &port)) {
return -ROCKER_EINVAL;
}
fp_port = r->fp_port[port];
return fp_port_eg(fp_port, iov, iovcnt);
}
static void rocker_test_dma_ctrl(Rocker *r, uint32_t val)
{
PCIDevice *dev = PCI_DEVICE(r);
char *buf;
int i;
buf = g_malloc(r->test_dma_size);
switch (val) {
case ROCKER_TEST_DMA_CTRL_CLEAR:
memset(buf, 0, r->test_dma_size);
break;
case ROCKER_TEST_DMA_CTRL_FILL:
memset(buf, 0x96, r->test_dma_size);
break;
case ROCKER_TEST_DMA_CTRL_INVERT:
pci_dma_read(dev, r->test_dma_addr, buf, r->test_dma_size);
for (i = 0; i < r->test_dma_size; i++) {
buf[i] = ~buf[i];
}
break;
default:
DPRINTF("not test dma control val=0x%08x\n", val);
goto err_out;
}
pci_dma_write(dev, r->test_dma_addr, buf, r->test_dma_size);
rocker_msix_irq(r, ROCKER_MSIX_VEC_TEST);
err_out:
g_free(buf);
}
static void rocker_reset(DeviceState *dev);
static void rocker_control(Rocker *r, uint32_t val)
{
if (val & ROCKER_CONTROL_RESET) {
rocker_reset(DEVICE(r));
}
}
static int rocker_pci_ring_count(Rocker *r)
{
/* There are:
* - command ring
* - event ring
* - tx and rx ring per each port
*/
return 2 + (2 * r->fp_ports);
}
static bool rocker_addr_is_desc_reg(Rocker *r, hwaddr addr)
{
hwaddr start = ROCKER_DMA_DESC_BASE;
hwaddr end = start + (ROCKER_DMA_DESC_SIZE * rocker_pci_ring_count(r));
return addr >= start && addr < end;
}
static void rocker_port_phys_enable_write(Rocker *r, uint64_t new)
{
int i;
bool old_enabled;
bool new_enabled;
FpPort *fp_port;
for (i = 0; i < r->fp_ports; i++) {
fp_port = r->fp_port[i];
old_enabled = fp_port_enabled(fp_port);
new_enabled = (new >> (i + 1)) & 0x1;
if (new_enabled == old_enabled) {
continue;
}
if (new_enabled) {
fp_port_enable(r->fp_port[i]);
} else {
fp_port_disable(r->fp_port[i]);
}
}
}
static void rocker_io_writel(void *opaque, hwaddr addr, uint32_t val)
{
Rocker *r = opaque;
if (rocker_addr_is_desc_reg(r, addr)) {
unsigned index = ROCKER_RING_INDEX(addr);
unsigned offset = addr & ROCKER_DMA_DESC_MASK;
switch (offset) {
case ROCKER_DMA_DESC_ADDR_OFFSET:
r->lower32 = (uint64_t)val;
break;
case ROCKER_DMA_DESC_ADDR_OFFSET + 4:
desc_ring_set_base_addr(r->rings[index],
((uint64_t)val) << 32 | r->lower32);
r->lower32 = 0;
break;
case ROCKER_DMA_DESC_SIZE_OFFSET:
desc_ring_set_size(r->rings[index], val);
break;
case ROCKER_DMA_DESC_HEAD_OFFSET:
if (desc_ring_set_head(r->rings[index], val)) {
rocker_msix_irq(r, desc_ring_get_msix_vector(r->rings[index]));
}
break;
case ROCKER_DMA_DESC_CTRL_OFFSET:
desc_ring_set_ctrl(r->rings[index], val);
break;
case ROCKER_DMA_DESC_CREDITS_OFFSET:
if (desc_ring_ret_credits(r->rings[index], val)) {
rocker_msix_irq(r, desc_ring_get_msix_vector(r->rings[index]));
}
break;
default:
DPRINTF("not implemented dma reg write(l) addr=0x" HWADDR_FMT_plx
rocker: add new rocker switch device Rocker is a simulated ethernet switch device. The device supports up to 62 front-panel ports and supports L2 switching and L3 routing functions, as well as L2/L3/L4 ACLs. The device presents a single PCI device for each switch, with a memory-mapped register space for device driver access. Rocker device is invoked with -device, for example a 4-port switch: -device rocker,name=sw1,len-ports=4,ports[0]=dev0,ports[1]=dev1, \ ports[2]=dev2,ports[3]=dev3 Each port is a netdev and can be paired with using -netdev id=<port name>. Signed-off-by: Scott Feldman <sfeldma@gmail.com> Signed-off-by: Jiri Pirko <jiri@resnulli.us> Acked-by: Scott Feldman <sfeldma@gmail.com> Acked-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David Ahern <dsahern@gmail.com> Message-id: 1426306173-24884-7-git-send-email-sfeldma@gmail.com rocker: fix clang compiler errors Consolidate all forward typedef declarations to rocker.h. Signed-off-by: David Ahern <dsahern@gmail.com> Acked-by: Scott Feldman <sfeldma@gmail.com> Acked-by: Jiri Pirko <jiri@resnulli.us> rocker: add support for flow modification We had support for flow add/del. This adds support for flow mod. I needed this for L3 support where an existing route is modified using NLM_F_REPLACE. For example: ip route add 12.0.0.0/30 nexthop via 11.0.0.1 dev swp1 ip route change 12.0.0.0/30 nexthop via 11.0.0.9 dev swp2 The first cmd adds the route. The second cmd changes the existing route by changing its nexthop info. In the device, a mod operation results in the matching flow enty being modified with the new settings. This is atomic to the device. Signed-off-by: Scott Feldman <sfeldma@gmail.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-03-14 05:09:30 +01:00
" val=0x%08x (ring %d, addr=0x%02x)\n",
addr, val, index, offset);
break;
}
return;
}
switch (addr) {
case ROCKER_TEST_REG:
r->test_reg = val;
break;
case ROCKER_TEST_REG64:
case ROCKER_TEST_DMA_ADDR:
case ROCKER_PORT_PHYS_ENABLE:
r->lower32 = (uint64_t)val;
break;
case ROCKER_TEST_REG64 + 4:
r->test_reg64 = ((uint64_t)val) << 32 | r->lower32;
r->lower32 = 0;
break;
case ROCKER_TEST_IRQ:
rocker_msix_irq(r, val);
break;
case ROCKER_TEST_DMA_SIZE:
r->test_dma_size = val & 0xFFFF;
rocker: add new rocker switch device Rocker is a simulated ethernet switch device. The device supports up to 62 front-panel ports and supports L2 switching and L3 routing functions, as well as L2/L3/L4 ACLs. The device presents a single PCI device for each switch, with a memory-mapped register space for device driver access. Rocker device is invoked with -device, for example a 4-port switch: -device rocker,name=sw1,len-ports=4,ports[0]=dev0,ports[1]=dev1, \ ports[2]=dev2,ports[3]=dev3 Each port is a netdev and can be paired with using -netdev id=<port name>. Signed-off-by: Scott Feldman <sfeldma@gmail.com> Signed-off-by: Jiri Pirko <jiri@resnulli.us> Acked-by: Scott Feldman <sfeldma@gmail.com> Acked-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David Ahern <dsahern@gmail.com> Message-id: 1426306173-24884-7-git-send-email-sfeldma@gmail.com rocker: fix clang compiler errors Consolidate all forward typedef declarations to rocker.h. Signed-off-by: David Ahern <dsahern@gmail.com> Acked-by: Scott Feldman <sfeldma@gmail.com> Acked-by: Jiri Pirko <jiri@resnulli.us> rocker: add support for flow modification We had support for flow add/del. This adds support for flow mod. I needed this for L3 support where an existing route is modified using NLM_F_REPLACE. For example: ip route add 12.0.0.0/30 nexthop via 11.0.0.1 dev swp1 ip route change 12.0.0.0/30 nexthop via 11.0.0.9 dev swp2 The first cmd adds the route. The second cmd changes the existing route by changing its nexthop info. In the device, a mod operation results in the matching flow enty being modified with the new settings. This is atomic to the device. Signed-off-by: Scott Feldman <sfeldma@gmail.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-03-14 05:09:30 +01:00
break;
case ROCKER_TEST_DMA_ADDR + 4:
r->test_dma_addr = ((uint64_t)val) << 32 | r->lower32;
r->lower32 = 0;
break;
case ROCKER_TEST_DMA_CTRL:
rocker_test_dma_ctrl(r, val);
break;
case ROCKER_CONTROL:
rocker_control(r, val);
break;
case ROCKER_PORT_PHYS_ENABLE + 4:
rocker_port_phys_enable_write(r, ((uint64_t)val) << 32 | r->lower32);
r->lower32 = 0;
break;
default:
DPRINTF("not implemented write(l) addr=0x" HWADDR_FMT_plx
rocker: add new rocker switch device Rocker is a simulated ethernet switch device. The device supports up to 62 front-panel ports and supports L2 switching and L3 routing functions, as well as L2/L3/L4 ACLs. The device presents a single PCI device for each switch, with a memory-mapped register space for device driver access. Rocker device is invoked with -device, for example a 4-port switch: -device rocker,name=sw1,len-ports=4,ports[0]=dev0,ports[1]=dev1, \ ports[2]=dev2,ports[3]=dev3 Each port is a netdev and can be paired with using -netdev id=<port name>. Signed-off-by: Scott Feldman <sfeldma@gmail.com> Signed-off-by: Jiri Pirko <jiri@resnulli.us> Acked-by: Scott Feldman <sfeldma@gmail.com> Acked-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David Ahern <dsahern@gmail.com> Message-id: 1426306173-24884-7-git-send-email-sfeldma@gmail.com rocker: fix clang compiler errors Consolidate all forward typedef declarations to rocker.h. Signed-off-by: David Ahern <dsahern@gmail.com> Acked-by: Scott Feldman <sfeldma@gmail.com> Acked-by: Jiri Pirko <jiri@resnulli.us> rocker: add support for flow modification We had support for flow add/del. This adds support for flow mod. I needed this for L3 support where an existing route is modified using NLM_F_REPLACE. For example: ip route add 12.0.0.0/30 nexthop via 11.0.0.1 dev swp1 ip route change 12.0.0.0/30 nexthop via 11.0.0.9 dev swp2 The first cmd adds the route. The second cmd changes the existing route by changing its nexthop info. In the device, a mod operation results in the matching flow enty being modified with the new settings. This is atomic to the device. Signed-off-by: Scott Feldman <sfeldma@gmail.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-03-14 05:09:30 +01:00
" val=0x%08x\n", addr, val);
break;
}
}
static void rocker_io_writeq(void *opaque, hwaddr addr, uint64_t val)
{
Rocker *r = opaque;
if (rocker_addr_is_desc_reg(r, addr)) {
unsigned index = ROCKER_RING_INDEX(addr);
unsigned offset = addr & ROCKER_DMA_DESC_MASK;
switch (offset) {
case ROCKER_DMA_DESC_ADDR_OFFSET:
desc_ring_set_base_addr(r->rings[index], val);
break;
default:
DPRINTF("not implemented dma reg write(q) addr=0x" HWADDR_FMT_plx
" val=0x" HWADDR_FMT_plx " (ring %d, offset=0x%02x)\n",
rocker: add new rocker switch device Rocker is a simulated ethernet switch device. The device supports up to 62 front-panel ports and supports L2 switching and L3 routing functions, as well as L2/L3/L4 ACLs. The device presents a single PCI device for each switch, with a memory-mapped register space for device driver access. Rocker device is invoked with -device, for example a 4-port switch: -device rocker,name=sw1,len-ports=4,ports[0]=dev0,ports[1]=dev1, \ ports[2]=dev2,ports[3]=dev3 Each port is a netdev and can be paired with using -netdev id=<port name>. Signed-off-by: Scott Feldman <sfeldma@gmail.com> Signed-off-by: Jiri Pirko <jiri@resnulli.us> Acked-by: Scott Feldman <sfeldma@gmail.com> Acked-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David Ahern <dsahern@gmail.com> Message-id: 1426306173-24884-7-git-send-email-sfeldma@gmail.com rocker: fix clang compiler errors Consolidate all forward typedef declarations to rocker.h. Signed-off-by: David Ahern <dsahern@gmail.com> Acked-by: Scott Feldman <sfeldma@gmail.com> Acked-by: Jiri Pirko <jiri@resnulli.us> rocker: add support for flow modification We had support for flow add/del. This adds support for flow mod. I needed this for L3 support where an existing route is modified using NLM_F_REPLACE. For example: ip route add 12.0.0.0/30 nexthop via 11.0.0.1 dev swp1 ip route change 12.0.0.0/30 nexthop via 11.0.0.9 dev swp2 The first cmd adds the route. The second cmd changes the existing route by changing its nexthop info. In the device, a mod operation results in the matching flow enty being modified with the new settings. This is atomic to the device. Signed-off-by: Scott Feldman <sfeldma@gmail.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-03-14 05:09:30 +01:00
addr, val, index, offset);
break;
}
return;
}
switch (addr) {
case ROCKER_TEST_REG64:
r->test_reg64 = val;
break;
case ROCKER_TEST_DMA_ADDR:
r->test_dma_addr = val;
break;
case ROCKER_PORT_PHYS_ENABLE:
rocker_port_phys_enable_write(r, val);
break;
default:
DPRINTF("not implemented write(q) addr=0x" HWADDR_FMT_plx
" val=0x" HWADDR_FMT_plx "\n", addr, val);
rocker: add new rocker switch device Rocker is a simulated ethernet switch device. The device supports up to 62 front-panel ports and supports L2 switching and L3 routing functions, as well as L2/L3/L4 ACLs. The device presents a single PCI device for each switch, with a memory-mapped register space for device driver access. Rocker device is invoked with -device, for example a 4-port switch: -device rocker,name=sw1,len-ports=4,ports[0]=dev0,ports[1]=dev1, \ ports[2]=dev2,ports[3]=dev3 Each port is a netdev and can be paired with using -netdev id=<port name>. Signed-off-by: Scott Feldman <sfeldma@gmail.com> Signed-off-by: Jiri Pirko <jiri@resnulli.us> Acked-by: Scott Feldman <sfeldma@gmail.com> Acked-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David Ahern <dsahern@gmail.com> Message-id: 1426306173-24884-7-git-send-email-sfeldma@gmail.com rocker: fix clang compiler errors Consolidate all forward typedef declarations to rocker.h. Signed-off-by: David Ahern <dsahern@gmail.com> Acked-by: Scott Feldman <sfeldma@gmail.com> Acked-by: Jiri Pirko <jiri@resnulli.us> rocker: add support for flow modification We had support for flow add/del. This adds support for flow mod. I needed this for L3 support where an existing route is modified using NLM_F_REPLACE. For example: ip route add 12.0.0.0/30 nexthop via 11.0.0.1 dev swp1 ip route change 12.0.0.0/30 nexthop via 11.0.0.9 dev swp2 The first cmd adds the route. The second cmd changes the existing route by changing its nexthop info. In the device, a mod operation results in the matching flow enty being modified with the new settings. This is atomic to the device. Signed-off-by: Scott Feldman <sfeldma@gmail.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-03-14 05:09:30 +01:00
break;
}
}
#ifdef DEBUG_ROCKER
#define regname(reg) case (reg): return #reg
static const char *rocker_reg_name(void *opaque, hwaddr addr)
{
Rocker *r = opaque;
if (rocker_addr_is_desc_reg(r, addr)) {
unsigned index = ROCKER_RING_INDEX(addr);
unsigned offset = addr & ROCKER_DMA_DESC_MASK;
static char buf[100];
char ring_name[10];
switch (index) {
case 0:
sprintf(ring_name, "cmd");
break;
case 1:
sprintf(ring_name, "event");
break;
default:
sprintf(ring_name, "%s-%d", index % 2 ? "rx" : "tx",
(index - 2) / 2);
}
switch (offset) {
case ROCKER_DMA_DESC_ADDR_OFFSET:
sprintf(buf, "Ring[%s] ADDR", ring_name);
return buf;
case ROCKER_DMA_DESC_ADDR_OFFSET+4:
sprintf(buf, "Ring[%s] ADDR+4", ring_name);
return buf;
case ROCKER_DMA_DESC_SIZE_OFFSET:
sprintf(buf, "Ring[%s] SIZE", ring_name);
return buf;
case ROCKER_DMA_DESC_HEAD_OFFSET:
sprintf(buf, "Ring[%s] HEAD", ring_name);
return buf;
case ROCKER_DMA_DESC_TAIL_OFFSET:
sprintf(buf, "Ring[%s] TAIL", ring_name);
return buf;
case ROCKER_DMA_DESC_CTRL_OFFSET:
sprintf(buf, "Ring[%s] CTRL", ring_name);
return buf;
case ROCKER_DMA_DESC_CREDITS_OFFSET:
sprintf(buf, "Ring[%s] CREDITS", ring_name);
return buf;
default:
sprintf(buf, "Ring[%s] ???", ring_name);
return buf;
}
} else {
switch (addr) {
regname(ROCKER_BOGUS_REG0);
regname(ROCKER_BOGUS_REG1);
regname(ROCKER_BOGUS_REG2);
regname(ROCKER_BOGUS_REG3);
regname(ROCKER_TEST_REG);
regname(ROCKER_TEST_REG64);
regname(ROCKER_TEST_REG64+4);
regname(ROCKER_TEST_IRQ);
regname(ROCKER_TEST_DMA_ADDR);
regname(ROCKER_TEST_DMA_ADDR+4);
regname(ROCKER_TEST_DMA_SIZE);
regname(ROCKER_TEST_DMA_CTRL);
regname(ROCKER_CONTROL);
regname(ROCKER_PORT_PHYS_COUNT);
regname(ROCKER_PORT_PHYS_LINK_STATUS);
regname(ROCKER_PORT_PHYS_LINK_STATUS+4);
regname(ROCKER_PORT_PHYS_ENABLE);
regname(ROCKER_PORT_PHYS_ENABLE+4);
regname(ROCKER_SWITCH_ID);
regname(ROCKER_SWITCH_ID+4);
}
}
return "???";
}
#else
static const char *rocker_reg_name(void *opaque, hwaddr addr)
{
return NULL;
}
#endif
static void rocker_mmio_write(void *opaque, hwaddr addr, uint64_t val,
unsigned size)
{
DPRINTF("Write %s addr " HWADDR_FMT_plx
", size %u, val " HWADDR_FMT_plx "\n",
rocker: add new rocker switch device Rocker is a simulated ethernet switch device. The device supports up to 62 front-panel ports and supports L2 switching and L3 routing functions, as well as L2/L3/L4 ACLs. The device presents a single PCI device for each switch, with a memory-mapped register space for device driver access. Rocker device is invoked with -device, for example a 4-port switch: -device rocker,name=sw1,len-ports=4,ports[0]=dev0,ports[1]=dev1, \ ports[2]=dev2,ports[3]=dev3 Each port is a netdev and can be paired with using -netdev id=<port name>. Signed-off-by: Scott Feldman <sfeldma@gmail.com> Signed-off-by: Jiri Pirko <jiri@resnulli.us> Acked-by: Scott Feldman <sfeldma@gmail.com> Acked-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David Ahern <dsahern@gmail.com> Message-id: 1426306173-24884-7-git-send-email-sfeldma@gmail.com rocker: fix clang compiler errors Consolidate all forward typedef declarations to rocker.h. Signed-off-by: David Ahern <dsahern@gmail.com> Acked-by: Scott Feldman <sfeldma@gmail.com> Acked-by: Jiri Pirko <jiri@resnulli.us> rocker: add support for flow modification We had support for flow add/del. This adds support for flow mod. I needed this for L3 support where an existing route is modified using NLM_F_REPLACE. For example: ip route add 12.0.0.0/30 nexthop via 11.0.0.1 dev swp1 ip route change 12.0.0.0/30 nexthop via 11.0.0.9 dev swp2 The first cmd adds the route. The second cmd changes the existing route by changing its nexthop info. In the device, a mod operation results in the matching flow enty being modified with the new settings. This is atomic to the device. Signed-off-by: Scott Feldman <sfeldma@gmail.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-03-14 05:09:30 +01:00
rocker_reg_name(opaque, addr), addr, size, val);
switch (size) {
case 4:
rocker_io_writel(opaque, addr, val);
break;
case 8:
rocker_io_writeq(opaque, addr, val);
break;
}
}
static uint64_t rocker_port_phys_link_status(Rocker *r)
{
int i;
uint64_t status = 0;
for (i = 0; i < r->fp_ports; i++) {
FpPort *port = r->fp_port[i];
if (fp_port_get_link_up(port)) {
status |= 1ULL << (i + 1);
rocker: add new rocker switch device Rocker is a simulated ethernet switch device. The device supports up to 62 front-panel ports and supports L2 switching and L3 routing functions, as well as L2/L3/L4 ACLs. The device presents a single PCI device for each switch, with a memory-mapped register space for device driver access. Rocker device is invoked with -device, for example a 4-port switch: -device rocker,name=sw1,len-ports=4,ports[0]=dev0,ports[1]=dev1, \ ports[2]=dev2,ports[3]=dev3 Each port is a netdev and can be paired with using -netdev id=<port name>. Signed-off-by: Scott Feldman <sfeldma@gmail.com> Signed-off-by: Jiri Pirko <jiri@resnulli.us> Acked-by: Scott Feldman <sfeldma@gmail.com> Acked-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David Ahern <dsahern@gmail.com> Message-id: 1426306173-24884-7-git-send-email-sfeldma@gmail.com rocker: fix clang compiler errors Consolidate all forward typedef declarations to rocker.h. Signed-off-by: David Ahern <dsahern@gmail.com> Acked-by: Scott Feldman <sfeldma@gmail.com> Acked-by: Jiri Pirko <jiri@resnulli.us> rocker: add support for flow modification We had support for flow add/del. This adds support for flow mod. I needed this for L3 support where an existing route is modified using NLM_F_REPLACE. For example: ip route add 12.0.0.0/30 nexthop via 11.0.0.1 dev swp1 ip route change 12.0.0.0/30 nexthop via 11.0.0.9 dev swp2 The first cmd adds the route. The second cmd changes the existing route by changing its nexthop info. In the device, a mod operation results in the matching flow enty being modified with the new settings. This is atomic to the device. Signed-off-by: Scott Feldman <sfeldma@gmail.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-03-14 05:09:30 +01:00
}
}
return status;
}
static uint64_t rocker_port_phys_enable_read(Rocker *r)
{
int i;
uint64_t ret = 0;
for (i = 0; i < r->fp_ports; i++) {
FpPort *port = r->fp_port[i];
if (fp_port_enabled(port)) {
ret |= 1ULL << (i + 1);
rocker: add new rocker switch device Rocker is a simulated ethernet switch device. The device supports up to 62 front-panel ports and supports L2 switching and L3 routing functions, as well as L2/L3/L4 ACLs. The device presents a single PCI device for each switch, with a memory-mapped register space for device driver access. Rocker device is invoked with -device, for example a 4-port switch: -device rocker,name=sw1,len-ports=4,ports[0]=dev0,ports[1]=dev1, \ ports[2]=dev2,ports[3]=dev3 Each port is a netdev and can be paired with using -netdev id=<port name>. Signed-off-by: Scott Feldman <sfeldma@gmail.com> Signed-off-by: Jiri Pirko <jiri@resnulli.us> Acked-by: Scott Feldman <sfeldma@gmail.com> Acked-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David Ahern <dsahern@gmail.com> Message-id: 1426306173-24884-7-git-send-email-sfeldma@gmail.com rocker: fix clang compiler errors Consolidate all forward typedef declarations to rocker.h. Signed-off-by: David Ahern <dsahern@gmail.com> Acked-by: Scott Feldman <sfeldma@gmail.com> Acked-by: Jiri Pirko <jiri@resnulli.us> rocker: add support for flow modification We had support for flow add/del. This adds support for flow mod. I needed this for L3 support where an existing route is modified using NLM_F_REPLACE. For example: ip route add 12.0.0.0/30 nexthop via 11.0.0.1 dev swp1 ip route change 12.0.0.0/30 nexthop via 11.0.0.9 dev swp2 The first cmd adds the route. The second cmd changes the existing route by changing its nexthop info. In the device, a mod operation results in the matching flow enty being modified with the new settings. This is atomic to the device. Signed-off-by: Scott Feldman <sfeldma@gmail.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-03-14 05:09:30 +01:00
}
}
return ret;
}
static uint32_t rocker_io_readl(void *opaque, hwaddr addr)
{
Rocker *r = opaque;
uint32_t ret;
if (rocker_addr_is_desc_reg(r, addr)) {
unsigned index = ROCKER_RING_INDEX(addr);
unsigned offset = addr & ROCKER_DMA_DESC_MASK;
switch (offset) {
case ROCKER_DMA_DESC_ADDR_OFFSET:
ret = (uint32_t)desc_ring_get_base_addr(r->rings[index]);
break;
case ROCKER_DMA_DESC_ADDR_OFFSET + 4:
ret = (uint32_t)(desc_ring_get_base_addr(r->rings[index]) >> 32);
break;
case ROCKER_DMA_DESC_SIZE_OFFSET:
ret = desc_ring_get_size(r->rings[index]);
break;
case ROCKER_DMA_DESC_HEAD_OFFSET:
ret = desc_ring_get_head(r->rings[index]);
break;
case ROCKER_DMA_DESC_TAIL_OFFSET:
ret = desc_ring_get_tail(r->rings[index]);
break;
case ROCKER_DMA_DESC_CREDITS_OFFSET:
ret = desc_ring_get_credits(r->rings[index]);
break;
default:
DPRINTF("not implemented dma reg read(l) addr=0x" HWADDR_FMT_plx
rocker: add new rocker switch device Rocker is a simulated ethernet switch device. The device supports up to 62 front-panel ports and supports L2 switching and L3 routing functions, as well as L2/L3/L4 ACLs. The device presents a single PCI device for each switch, with a memory-mapped register space for device driver access. Rocker device is invoked with -device, for example a 4-port switch: -device rocker,name=sw1,len-ports=4,ports[0]=dev0,ports[1]=dev1, \ ports[2]=dev2,ports[3]=dev3 Each port is a netdev and can be paired with using -netdev id=<port name>. Signed-off-by: Scott Feldman <sfeldma@gmail.com> Signed-off-by: Jiri Pirko <jiri@resnulli.us> Acked-by: Scott Feldman <sfeldma@gmail.com> Acked-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David Ahern <dsahern@gmail.com> Message-id: 1426306173-24884-7-git-send-email-sfeldma@gmail.com rocker: fix clang compiler errors Consolidate all forward typedef declarations to rocker.h. Signed-off-by: David Ahern <dsahern@gmail.com> Acked-by: Scott Feldman <sfeldma@gmail.com> Acked-by: Jiri Pirko <jiri@resnulli.us> rocker: add support for flow modification We had support for flow add/del. This adds support for flow mod. I needed this for L3 support where an existing route is modified using NLM_F_REPLACE. For example: ip route add 12.0.0.0/30 nexthop via 11.0.0.1 dev swp1 ip route change 12.0.0.0/30 nexthop via 11.0.0.9 dev swp2 The first cmd adds the route. The second cmd changes the existing route by changing its nexthop info. In the device, a mod operation results in the matching flow enty being modified with the new settings. This is atomic to the device. Signed-off-by: Scott Feldman <sfeldma@gmail.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-03-14 05:09:30 +01:00
" (ring %d, addr=0x%02x)\n", addr, index, offset);
ret = 0;
break;
}
return ret;
}
switch (addr) {
case ROCKER_BOGUS_REG0:
case ROCKER_BOGUS_REG1:
case ROCKER_BOGUS_REG2:
case ROCKER_BOGUS_REG3:
ret = 0xDEADBABE;
break;
case ROCKER_TEST_REG:
ret = r->test_reg * 2;
break;
case ROCKER_TEST_REG64:
ret = (uint32_t)(r->test_reg64 * 2);
break;
case ROCKER_TEST_REG64 + 4:
ret = (uint32_t)((r->test_reg64 * 2) >> 32);
break;
case ROCKER_TEST_DMA_SIZE:
ret = r->test_dma_size;
break;
case ROCKER_TEST_DMA_ADDR:
ret = (uint32_t)r->test_dma_addr;
break;
case ROCKER_TEST_DMA_ADDR + 4:
ret = (uint32_t)(r->test_dma_addr >> 32);
break;
case ROCKER_PORT_PHYS_COUNT:
ret = r->fp_ports;
break;
case ROCKER_PORT_PHYS_LINK_STATUS:
ret = (uint32_t)rocker_port_phys_link_status(r);
break;
case ROCKER_PORT_PHYS_LINK_STATUS + 4:
ret = (uint32_t)(rocker_port_phys_link_status(r) >> 32);
break;
case ROCKER_PORT_PHYS_ENABLE:
ret = (uint32_t)rocker_port_phys_enable_read(r);
break;
case ROCKER_PORT_PHYS_ENABLE + 4:
ret = (uint32_t)(rocker_port_phys_enable_read(r) >> 32);
break;
case ROCKER_SWITCH_ID:
ret = (uint32_t)r->switch_id;
break;
case ROCKER_SWITCH_ID + 4:
ret = (uint32_t)(r->switch_id >> 32);
break;
default:
DPRINTF("not implemented read(l) addr=0x" HWADDR_FMT_plx "\n", addr);
rocker: add new rocker switch device Rocker is a simulated ethernet switch device. The device supports up to 62 front-panel ports and supports L2 switching and L3 routing functions, as well as L2/L3/L4 ACLs. The device presents a single PCI device for each switch, with a memory-mapped register space for device driver access. Rocker device is invoked with -device, for example a 4-port switch: -device rocker,name=sw1,len-ports=4,ports[0]=dev0,ports[1]=dev1, \ ports[2]=dev2,ports[3]=dev3 Each port is a netdev and can be paired with using -netdev id=<port name>. Signed-off-by: Scott Feldman <sfeldma@gmail.com> Signed-off-by: Jiri Pirko <jiri@resnulli.us> Acked-by: Scott Feldman <sfeldma@gmail.com> Acked-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David Ahern <dsahern@gmail.com> Message-id: 1426306173-24884-7-git-send-email-sfeldma@gmail.com rocker: fix clang compiler errors Consolidate all forward typedef declarations to rocker.h. Signed-off-by: David Ahern <dsahern@gmail.com> Acked-by: Scott Feldman <sfeldma@gmail.com> Acked-by: Jiri Pirko <jiri@resnulli.us> rocker: add support for flow modification We had support for flow add/del. This adds support for flow mod. I needed this for L3 support where an existing route is modified using NLM_F_REPLACE. For example: ip route add 12.0.0.0/30 nexthop via 11.0.0.1 dev swp1 ip route change 12.0.0.0/30 nexthop via 11.0.0.9 dev swp2 The first cmd adds the route. The second cmd changes the existing route by changing its nexthop info. In the device, a mod operation results in the matching flow enty being modified with the new settings. This is atomic to the device. Signed-off-by: Scott Feldman <sfeldma@gmail.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-03-14 05:09:30 +01:00
ret = 0;
break;
}
return ret;
}
static uint64_t rocker_io_readq(void *opaque, hwaddr addr)
{
Rocker *r = opaque;
uint64_t ret;
if (rocker_addr_is_desc_reg(r, addr)) {
unsigned index = ROCKER_RING_INDEX(addr);
unsigned offset = addr & ROCKER_DMA_DESC_MASK;
switch (addr & ROCKER_DMA_DESC_MASK) {
case ROCKER_DMA_DESC_ADDR_OFFSET:
ret = desc_ring_get_base_addr(r->rings[index]);
break;
default:
DPRINTF("not implemented dma reg read(q) addr=0x" HWADDR_FMT_plx
rocker: add new rocker switch device Rocker is a simulated ethernet switch device. The device supports up to 62 front-panel ports and supports L2 switching and L3 routing functions, as well as L2/L3/L4 ACLs. The device presents a single PCI device for each switch, with a memory-mapped register space for device driver access. Rocker device is invoked with -device, for example a 4-port switch: -device rocker,name=sw1,len-ports=4,ports[0]=dev0,ports[1]=dev1, \ ports[2]=dev2,ports[3]=dev3 Each port is a netdev and can be paired with using -netdev id=<port name>. Signed-off-by: Scott Feldman <sfeldma@gmail.com> Signed-off-by: Jiri Pirko <jiri@resnulli.us> Acked-by: Scott Feldman <sfeldma@gmail.com> Acked-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David Ahern <dsahern@gmail.com> Message-id: 1426306173-24884-7-git-send-email-sfeldma@gmail.com rocker: fix clang compiler errors Consolidate all forward typedef declarations to rocker.h. Signed-off-by: David Ahern <dsahern@gmail.com> Acked-by: Scott Feldman <sfeldma@gmail.com> Acked-by: Jiri Pirko <jiri@resnulli.us> rocker: add support for flow modification We had support for flow add/del. This adds support for flow mod. I needed this for L3 support where an existing route is modified using NLM_F_REPLACE. For example: ip route add 12.0.0.0/30 nexthop via 11.0.0.1 dev swp1 ip route change 12.0.0.0/30 nexthop via 11.0.0.9 dev swp2 The first cmd adds the route. The second cmd changes the existing route by changing its nexthop info. In the device, a mod operation results in the matching flow enty being modified with the new settings. This is atomic to the device. Signed-off-by: Scott Feldman <sfeldma@gmail.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-03-14 05:09:30 +01:00
" (ring %d, addr=0x%02x)\n", addr, index, offset);
ret = 0;
break;
}
return ret;
}
switch (addr) {
case ROCKER_BOGUS_REG0:
case ROCKER_BOGUS_REG2:
ret = 0xDEADBABEDEADBABEULL;
break;
case ROCKER_TEST_REG64:
ret = r->test_reg64 * 2;
break;
case ROCKER_TEST_DMA_ADDR:
ret = r->test_dma_addr;
break;
case ROCKER_PORT_PHYS_LINK_STATUS:
ret = rocker_port_phys_link_status(r);
break;
case ROCKER_PORT_PHYS_ENABLE:
ret = rocker_port_phys_enable_read(r);
break;
case ROCKER_SWITCH_ID:
ret = r->switch_id;
break;
default:
DPRINTF("not implemented read(q) addr=0x" HWADDR_FMT_plx "\n", addr);
rocker: add new rocker switch device Rocker is a simulated ethernet switch device. The device supports up to 62 front-panel ports and supports L2 switching and L3 routing functions, as well as L2/L3/L4 ACLs. The device presents a single PCI device for each switch, with a memory-mapped register space for device driver access. Rocker device is invoked with -device, for example a 4-port switch: -device rocker,name=sw1,len-ports=4,ports[0]=dev0,ports[1]=dev1, \ ports[2]=dev2,ports[3]=dev3 Each port is a netdev and can be paired with using -netdev id=<port name>. Signed-off-by: Scott Feldman <sfeldma@gmail.com> Signed-off-by: Jiri Pirko <jiri@resnulli.us> Acked-by: Scott Feldman <sfeldma@gmail.com> Acked-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David Ahern <dsahern@gmail.com> Message-id: 1426306173-24884-7-git-send-email-sfeldma@gmail.com rocker: fix clang compiler errors Consolidate all forward typedef declarations to rocker.h. Signed-off-by: David Ahern <dsahern@gmail.com> Acked-by: Scott Feldman <sfeldma@gmail.com> Acked-by: Jiri Pirko <jiri@resnulli.us> rocker: add support for flow modification We had support for flow add/del. This adds support for flow mod. I needed this for L3 support where an existing route is modified using NLM_F_REPLACE. For example: ip route add 12.0.0.0/30 nexthop via 11.0.0.1 dev swp1 ip route change 12.0.0.0/30 nexthop via 11.0.0.9 dev swp2 The first cmd adds the route. The second cmd changes the existing route by changing its nexthop info. In the device, a mod operation results in the matching flow enty being modified with the new settings. This is atomic to the device. Signed-off-by: Scott Feldman <sfeldma@gmail.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-03-14 05:09:30 +01:00
ret = 0;
break;
}
return ret;
}
static uint64_t rocker_mmio_read(void *opaque, hwaddr addr, unsigned size)
{
DPRINTF("Read %s addr " HWADDR_FMT_plx ", size %u\n",
rocker: add new rocker switch device Rocker is a simulated ethernet switch device. The device supports up to 62 front-panel ports and supports L2 switching and L3 routing functions, as well as L2/L3/L4 ACLs. The device presents a single PCI device for each switch, with a memory-mapped register space for device driver access. Rocker device is invoked with -device, for example a 4-port switch: -device rocker,name=sw1,len-ports=4,ports[0]=dev0,ports[1]=dev1, \ ports[2]=dev2,ports[3]=dev3 Each port is a netdev and can be paired with using -netdev id=<port name>. Signed-off-by: Scott Feldman <sfeldma@gmail.com> Signed-off-by: Jiri Pirko <jiri@resnulli.us> Acked-by: Scott Feldman <sfeldma@gmail.com> Acked-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David Ahern <dsahern@gmail.com> Message-id: 1426306173-24884-7-git-send-email-sfeldma@gmail.com rocker: fix clang compiler errors Consolidate all forward typedef declarations to rocker.h. Signed-off-by: David Ahern <dsahern@gmail.com> Acked-by: Scott Feldman <sfeldma@gmail.com> Acked-by: Jiri Pirko <jiri@resnulli.us> rocker: add support for flow modification We had support for flow add/del. This adds support for flow mod. I needed this for L3 support where an existing route is modified using NLM_F_REPLACE. For example: ip route add 12.0.0.0/30 nexthop via 11.0.0.1 dev swp1 ip route change 12.0.0.0/30 nexthop via 11.0.0.9 dev swp2 The first cmd adds the route. The second cmd changes the existing route by changing its nexthop info. In the device, a mod operation results in the matching flow enty being modified with the new settings. This is atomic to the device. Signed-off-by: Scott Feldman <sfeldma@gmail.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-03-14 05:09:30 +01:00
rocker_reg_name(opaque, addr), addr, size);
switch (size) {
case 4:
return rocker_io_readl(opaque, addr);
case 8:
return rocker_io_readq(opaque, addr);
}
return -1;
}
static const MemoryRegionOps rocker_mmio_ops = {
.read = rocker_mmio_read,
.write = rocker_mmio_write,
.endianness = DEVICE_LITTLE_ENDIAN,
.valid = {
.min_access_size = 4,
.max_access_size = 8,
},
.impl = {
.min_access_size = 4,
.max_access_size = 8,
},
};
static void rocker_msix_vectors_unuse(Rocker *r,
unsigned int num_vectors)
{
PCIDevice *dev = PCI_DEVICE(r);
int i;
for (i = 0; i < num_vectors; i++) {
msix_vector_unuse(dev, i);
}
}
static void rocker_msix_vectors_use(Rocker *r, unsigned int num_vectors)
rocker: add new rocker switch device Rocker is a simulated ethernet switch device. The device supports up to 62 front-panel ports and supports L2 switching and L3 routing functions, as well as L2/L3/L4 ACLs. The device presents a single PCI device for each switch, with a memory-mapped register space for device driver access. Rocker device is invoked with -device, for example a 4-port switch: -device rocker,name=sw1,len-ports=4,ports[0]=dev0,ports[1]=dev1, \ ports[2]=dev2,ports[3]=dev3 Each port is a netdev and can be paired with using -netdev id=<port name>. Signed-off-by: Scott Feldman <sfeldma@gmail.com> Signed-off-by: Jiri Pirko <jiri@resnulli.us> Acked-by: Scott Feldman <sfeldma@gmail.com> Acked-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David Ahern <dsahern@gmail.com> Message-id: 1426306173-24884-7-git-send-email-sfeldma@gmail.com rocker: fix clang compiler errors Consolidate all forward typedef declarations to rocker.h. Signed-off-by: David Ahern <dsahern@gmail.com> Acked-by: Scott Feldman <sfeldma@gmail.com> Acked-by: Jiri Pirko <jiri@resnulli.us> rocker: add support for flow modification We had support for flow add/del. This adds support for flow mod. I needed this for L3 support where an existing route is modified using NLM_F_REPLACE. For example: ip route add 12.0.0.0/30 nexthop via 11.0.0.1 dev swp1 ip route change 12.0.0.0/30 nexthop via 11.0.0.9 dev swp2 The first cmd adds the route. The second cmd changes the existing route by changing its nexthop info. In the device, a mod operation results in the matching flow enty being modified with the new settings. This is atomic to the device. Signed-off-by: Scott Feldman <sfeldma@gmail.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-03-14 05:09:30 +01:00
{
PCIDevice *dev = PCI_DEVICE(r);
int i;
for (i = 0; i < num_vectors; i++) {
msix_vector_use(dev, i);
rocker: add new rocker switch device Rocker is a simulated ethernet switch device. The device supports up to 62 front-panel ports and supports L2 switching and L3 routing functions, as well as L2/L3/L4 ACLs. The device presents a single PCI device for each switch, with a memory-mapped register space for device driver access. Rocker device is invoked with -device, for example a 4-port switch: -device rocker,name=sw1,len-ports=4,ports[0]=dev0,ports[1]=dev1, \ ports[2]=dev2,ports[3]=dev3 Each port is a netdev and can be paired with using -netdev id=<port name>. Signed-off-by: Scott Feldman <sfeldma@gmail.com> Signed-off-by: Jiri Pirko <jiri@resnulli.us> Acked-by: Scott Feldman <sfeldma@gmail.com> Acked-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David Ahern <dsahern@gmail.com> Message-id: 1426306173-24884-7-git-send-email-sfeldma@gmail.com rocker: fix clang compiler errors Consolidate all forward typedef declarations to rocker.h. Signed-off-by: David Ahern <dsahern@gmail.com> Acked-by: Scott Feldman <sfeldma@gmail.com> Acked-by: Jiri Pirko <jiri@resnulli.us> rocker: add support for flow modification We had support for flow add/del. This adds support for flow mod. I needed this for L3 support where an existing route is modified using NLM_F_REPLACE. For example: ip route add 12.0.0.0/30 nexthop via 11.0.0.1 dev swp1 ip route change 12.0.0.0/30 nexthop via 11.0.0.9 dev swp2 The first cmd adds the route. The second cmd changes the existing route by changing its nexthop info. In the device, a mod operation results in the matching flow enty being modified with the new settings. This is atomic to the device. Signed-off-by: Scott Feldman <sfeldma@gmail.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-03-14 05:09:30 +01:00
}
}
static int rocker_msix_init(Rocker *r, Error **errp)
rocker: add new rocker switch device Rocker is a simulated ethernet switch device. The device supports up to 62 front-panel ports and supports L2 switching and L3 routing functions, as well as L2/L3/L4 ACLs. The device presents a single PCI device for each switch, with a memory-mapped register space for device driver access. Rocker device is invoked with -device, for example a 4-port switch: -device rocker,name=sw1,len-ports=4,ports[0]=dev0,ports[1]=dev1, \ ports[2]=dev2,ports[3]=dev3 Each port is a netdev and can be paired with using -netdev id=<port name>. Signed-off-by: Scott Feldman <sfeldma@gmail.com> Signed-off-by: Jiri Pirko <jiri@resnulli.us> Acked-by: Scott Feldman <sfeldma@gmail.com> Acked-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David Ahern <dsahern@gmail.com> Message-id: 1426306173-24884-7-git-send-email-sfeldma@gmail.com rocker: fix clang compiler errors Consolidate all forward typedef declarations to rocker.h. Signed-off-by: David Ahern <dsahern@gmail.com> Acked-by: Scott Feldman <sfeldma@gmail.com> Acked-by: Jiri Pirko <jiri@resnulli.us> rocker: add support for flow modification We had support for flow add/del. This adds support for flow mod. I needed this for L3 support where an existing route is modified using NLM_F_REPLACE. For example: ip route add 12.0.0.0/30 nexthop via 11.0.0.1 dev swp1 ip route change 12.0.0.0/30 nexthop via 11.0.0.9 dev swp2 The first cmd adds the route. The second cmd changes the existing route by changing its nexthop info. In the device, a mod operation results in the matching flow enty being modified with the new settings. This is atomic to the device. Signed-off-by: Scott Feldman <sfeldma@gmail.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-03-14 05:09:30 +01:00
{
PCIDevice *dev = PCI_DEVICE(r);
int err;
err = msix_init(dev, ROCKER_MSIX_VEC_COUNT(r->fp_ports),
&r->msix_bar,
ROCKER_PCI_MSIX_BAR_IDX, ROCKER_PCI_MSIX_TABLE_OFFSET,
&r->msix_bar,
ROCKER_PCI_MSIX_BAR_IDX, ROCKER_PCI_MSIX_PBA_OFFSET,
0, errp);
rocker: add new rocker switch device Rocker is a simulated ethernet switch device. The device supports up to 62 front-panel ports and supports L2 switching and L3 routing functions, as well as L2/L3/L4 ACLs. The device presents a single PCI device for each switch, with a memory-mapped register space for device driver access. Rocker device is invoked with -device, for example a 4-port switch: -device rocker,name=sw1,len-ports=4,ports[0]=dev0,ports[1]=dev1, \ ports[2]=dev2,ports[3]=dev3 Each port is a netdev and can be paired with using -netdev id=<port name>. Signed-off-by: Scott Feldman <sfeldma@gmail.com> Signed-off-by: Jiri Pirko <jiri@resnulli.us> Acked-by: Scott Feldman <sfeldma@gmail.com> Acked-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David Ahern <dsahern@gmail.com> Message-id: 1426306173-24884-7-git-send-email-sfeldma@gmail.com rocker: fix clang compiler errors Consolidate all forward typedef declarations to rocker.h. Signed-off-by: David Ahern <dsahern@gmail.com> Acked-by: Scott Feldman <sfeldma@gmail.com> Acked-by: Jiri Pirko <jiri@resnulli.us> rocker: add support for flow modification We had support for flow add/del. This adds support for flow mod. I needed this for L3 support where an existing route is modified using NLM_F_REPLACE. For example: ip route add 12.0.0.0/30 nexthop via 11.0.0.1 dev swp1 ip route change 12.0.0.0/30 nexthop via 11.0.0.9 dev swp2 The first cmd adds the route. The second cmd changes the existing route by changing its nexthop info. In the device, a mod operation results in the matching flow enty being modified with the new settings. This is atomic to the device. Signed-off-by: Scott Feldman <sfeldma@gmail.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-03-14 05:09:30 +01:00
if (err) {
return err;
}
rocker_msix_vectors_use(r, ROCKER_MSIX_VEC_COUNT(r->fp_ports));
rocker: add new rocker switch device Rocker is a simulated ethernet switch device. The device supports up to 62 front-panel ports and supports L2 switching and L3 routing functions, as well as L2/L3/L4 ACLs. The device presents a single PCI device for each switch, with a memory-mapped register space for device driver access. Rocker device is invoked with -device, for example a 4-port switch: -device rocker,name=sw1,len-ports=4,ports[0]=dev0,ports[1]=dev1, \ ports[2]=dev2,ports[3]=dev3 Each port is a netdev and can be paired with using -netdev id=<port name>. Signed-off-by: Scott Feldman <sfeldma@gmail.com> Signed-off-by: Jiri Pirko <jiri@resnulli.us> Acked-by: Scott Feldman <sfeldma@gmail.com> Acked-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David Ahern <dsahern@gmail.com> Message-id: 1426306173-24884-7-git-send-email-sfeldma@gmail.com rocker: fix clang compiler errors Consolidate all forward typedef declarations to rocker.h. Signed-off-by: David Ahern <dsahern@gmail.com> Acked-by: Scott Feldman <sfeldma@gmail.com> Acked-by: Jiri Pirko <jiri@resnulli.us> rocker: add support for flow modification We had support for flow add/del. This adds support for flow mod. I needed this for L3 support where an existing route is modified using NLM_F_REPLACE. For example: ip route add 12.0.0.0/30 nexthop via 11.0.0.1 dev swp1 ip route change 12.0.0.0/30 nexthop via 11.0.0.9 dev swp2 The first cmd adds the route. The second cmd changes the existing route by changing its nexthop info. In the device, a mod operation results in the matching flow enty being modified with the new settings. This is atomic to the device. Signed-off-by: Scott Feldman <sfeldma@gmail.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-03-14 05:09:30 +01:00
return 0;
}
static void rocker_msix_uninit(Rocker *r)
{
PCIDevice *dev = PCI_DEVICE(r);
msix_uninit(dev, &r->msix_bar, &r->msix_bar);
rocker_msix_vectors_unuse(r, ROCKER_MSIX_VEC_COUNT(r->fp_ports));
}
static World *rocker_world_type_by_name(Rocker *r, const char *name)
{
int i;
for (i = 0; i < ROCKER_WORLD_TYPE_MAX; i++) {
if (strcmp(name, world_name(r->worlds[i])) == 0) {
return r->worlds[i];
avoid TABs in files that only contain a few Most files that have TABs only contain a handful of them. Change them to spaces so that we don't confuse people. disas, standard-headers, linux-headers and libdecnumber are imported from other projects and probably should be exempted from the check. Outside those, after this patch the following files still contain both 8-space and TAB sequences at the beginning of the line. Many of them have a majority of TABs, or were initially committed with all tabs. bsd-user/i386/target_syscall.h bsd-user/x86_64/target_syscall.h crypto/aes.c hw/audio/fmopl.c hw/audio/fmopl.h hw/block/tc58128.c hw/display/cirrus_vga.c hw/display/xenfb.c hw/dma/etraxfs_dma.c hw/intc/sh_intc.c hw/misc/mst_fpga.c hw/net/pcnet.c hw/sh4/sh7750.c hw/timer/m48t59.c hw/timer/sh_timer.c include/crypto/aes.h include/disas/bfd.h include/hw/sh4/sh.h libdecnumber/decNumber.c linux-headers/asm-generic/unistd.h linux-headers/linux/kvm.h linux-user/alpha/target_syscall.h linux-user/arm/nwfpe/double_cpdo.c linux-user/arm/nwfpe/fpa11_cpdt.c linux-user/arm/nwfpe/fpa11_cprt.c linux-user/arm/nwfpe/fpa11.h linux-user/flat.h linux-user/flatload.c linux-user/i386/target_syscall.h linux-user/ppc/target_syscall.h linux-user/sparc/target_syscall.h linux-user/syscall.c linux-user/syscall_defs.h linux-user/x86_64/target_syscall.h slirp/cksum.c slirp/if.c slirp/ip.h slirp/ip_icmp.c slirp/ip_icmp.h slirp/ip_input.c slirp/ip_output.c slirp/mbuf.c slirp/misc.c slirp/sbuf.c slirp/socket.c slirp/socket.h slirp/tcp_input.c slirp/tcpip.h slirp/tcp_output.c slirp/tcp_subr.c slirp/tcp_timer.c slirp/tftp.c slirp/udp.c slirp/udp.h target/cris/cpu.h target/cris/mmu.c target/cris/op_helper.c target/sh4/helper.c target/sh4/op_helper.c target/sh4/translate.c tcg/sparc/tcg-target.inc.c tests/tcg/cris/check_addo.c tests/tcg/cris/check_moveq.c tests/tcg/cris/check_swap.c tests/tcg/multiarch/test-mmap.c ui/vnc-enc-hextile-template.h ui/vnc-enc-zywrle.h util/envlist.c util/readline.c The following have only TABs: bsd-user/i386/target_signal.h bsd-user/sparc64/target_signal.h bsd-user/sparc64/target_syscall.h bsd-user/sparc/target_signal.h bsd-user/sparc/target_syscall.h bsd-user/x86_64/target_signal.h crypto/desrfb.c hw/audio/intel-hda-defs.h hw/core/uboot_image.h hw/sh4/sh7750_regnames.c hw/sh4/sh7750_regs.h include/hw/cris/etraxfs_dma.h linux-user/alpha/termbits.h linux-user/arm/nwfpe/fpopcode.h linux-user/arm/nwfpe/fpsr.h linux-user/arm/syscall_nr.h linux-user/arm/target_signal.h linux-user/cris/target_signal.h linux-user/i386/target_signal.h linux-user/linux_loop.h linux-user/m68k/target_signal.h linux-user/microblaze/target_signal.h linux-user/mips64/target_signal.h linux-user/mips/target_signal.h linux-user/mips/target_syscall.h linux-user/mips/termbits.h linux-user/ppc/target_signal.h linux-user/sh4/target_signal.h linux-user/sh4/termbits.h linux-user/sparc64/target_syscall.h linux-user/sparc/target_signal.h linux-user/x86_64/target_signal.h linux-user/x86_64/termbits.h pc-bios/optionrom/optionrom.h slirp/mbuf.h slirp/misc.h slirp/sbuf.h slirp/tcp.h slirp/tcp_timer.h slirp/tcp_var.h target/i386/svm.h target/sparc/asi.h target/xtensa/core-dc232b/xtensa-modules.inc.c target/xtensa/core-dc233c/xtensa-modules.inc.c target/xtensa/core-de212/core-isa.h target/xtensa/core-de212/xtensa-modules.inc.c target/xtensa/core-fsf/xtensa-modules.inc.c target/xtensa/core-sample_controller/core-isa.h target/xtensa/core-sample_controller/xtensa-modules.inc.c target/xtensa/core-test_kc705_be/core-isa.h target/xtensa/core-test_kc705_be/xtensa-modules.inc.c tests/tcg/cris/check_abs.c tests/tcg/cris/check_addc.c tests/tcg/cris/check_addcm.c tests/tcg/cris/check_addoq.c tests/tcg/cris/check_bound.c tests/tcg/cris/check_ftag.c tests/tcg/cris/check_int64.c tests/tcg/cris/check_lz.c tests/tcg/cris/check_openpf5.c tests/tcg/cris/check_sigalrm.c tests/tcg/cris/crisutils.h tests/tcg/cris/sys.c tests/tcg/i386/test-i386-ssse3.c ui/vgafont.h Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20181213223737.11793-3-pbonzini@redhat.com> Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com> Acked-by: Richard Henderson <richard.henderson@linaro.org> Acked-by: Eric Blake <eblake@redhat.com> Acked-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Stefan Markovic <smarkovic@wavecomp.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-12-13 23:37:37 +01:00
}
}
return NULL;
}
static void pci_rocker_realize(PCIDevice *dev, Error **errp)
rocker: add new rocker switch device Rocker is a simulated ethernet switch device. The device supports up to 62 front-panel ports and supports L2 switching and L3 routing functions, as well as L2/L3/L4 ACLs. The device presents a single PCI device for each switch, with a memory-mapped register space for device driver access. Rocker device is invoked with -device, for example a 4-port switch: -device rocker,name=sw1,len-ports=4,ports[0]=dev0,ports[1]=dev1, \ ports[2]=dev2,ports[3]=dev3 Each port is a netdev and can be paired with using -netdev id=<port name>. Signed-off-by: Scott Feldman <sfeldma@gmail.com> Signed-off-by: Jiri Pirko <jiri@resnulli.us> Acked-by: Scott Feldman <sfeldma@gmail.com> Acked-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David Ahern <dsahern@gmail.com> Message-id: 1426306173-24884-7-git-send-email-sfeldma@gmail.com rocker: fix clang compiler errors Consolidate all forward typedef declarations to rocker.h. Signed-off-by: David Ahern <dsahern@gmail.com> Acked-by: Scott Feldman <sfeldma@gmail.com> Acked-by: Jiri Pirko <jiri@resnulli.us> rocker: add support for flow modification We had support for flow add/del. This adds support for flow mod. I needed this for L3 support where an existing route is modified using NLM_F_REPLACE. For example: ip route add 12.0.0.0/30 nexthop via 11.0.0.1 dev swp1 ip route change 12.0.0.0/30 nexthop via 11.0.0.9 dev swp2 The first cmd adds the route. The second cmd changes the existing route by changing its nexthop info. In the device, a mod operation results in the matching flow enty being modified with the new settings. This is atomic to the device. Signed-off-by: Scott Feldman <sfeldma@gmail.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-03-14 05:09:30 +01:00
{
Rocker *r = ROCKER(dev);
rocker: add new rocker switch device Rocker is a simulated ethernet switch device. The device supports up to 62 front-panel ports and supports L2 switching and L3 routing functions, as well as L2/L3/L4 ACLs. The device presents a single PCI device for each switch, with a memory-mapped register space for device driver access. Rocker device is invoked with -device, for example a 4-port switch: -device rocker,name=sw1,len-ports=4,ports[0]=dev0,ports[1]=dev1, \ ports[2]=dev2,ports[3]=dev3 Each port is a netdev and can be paired with using -netdev id=<port name>. Signed-off-by: Scott Feldman <sfeldma@gmail.com> Signed-off-by: Jiri Pirko <jiri@resnulli.us> Acked-by: Scott Feldman <sfeldma@gmail.com> Acked-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David Ahern <dsahern@gmail.com> Message-id: 1426306173-24884-7-git-send-email-sfeldma@gmail.com rocker: fix clang compiler errors Consolidate all forward typedef declarations to rocker.h. Signed-off-by: David Ahern <dsahern@gmail.com> Acked-by: Scott Feldman <sfeldma@gmail.com> Acked-by: Jiri Pirko <jiri@resnulli.us> rocker: add support for flow modification We had support for flow add/del. This adds support for flow mod. I needed this for L3 support where an existing route is modified using NLM_F_REPLACE. For example: ip route add 12.0.0.0/30 nexthop via 11.0.0.1 dev swp1 ip route change 12.0.0.0/30 nexthop via 11.0.0.9 dev swp2 The first cmd adds the route. The second cmd changes the existing route by changing its nexthop info. In the device, a mod operation results in the matching flow enty being modified with the new settings. This is atomic to the device. Signed-off-by: Scott Feldman <sfeldma@gmail.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-03-14 05:09:30 +01:00
const MACAddr zero = { .a = { 0, 0, 0, 0, 0, 0 } };
const MACAddr dflt = { .a = { 0x52, 0x54, 0x00, 0x12, 0x35, 0x01 } };
static int sw_index;
int i, err = 0;
/* allocate worlds */
r->worlds[ROCKER_WORLD_TYPE_OF_DPA] = of_dpa_world_alloc(r);
if (!r->world_name) {
r->world_name = g_strdup(world_name(r->worlds[ROCKER_WORLD_TYPE_OF_DPA]));
}
r->world_dflt = rocker_world_type_by_name(r, r->world_name);
if (!r->world_dflt) {
error_setg(errp,
"invalid argument requested world %s does not exist",
r->world_name);
goto err_world_type_by_name;
}
rocker: add new rocker switch device Rocker is a simulated ethernet switch device. The device supports up to 62 front-panel ports and supports L2 switching and L3 routing functions, as well as L2/L3/L4 ACLs. The device presents a single PCI device for each switch, with a memory-mapped register space for device driver access. Rocker device is invoked with -device, for example a 4-port switch: -device rocker,name=sw1,len-ports=4,ports[0]=dev0,ports[1]=dev1, \ ports[2]=dev2,ports[3]=dev3 Each port is a netdev and can be paired with using -netdev id=<port name>. Signed-off-by: Scott Feldman <sfeldma@gmail.com> Signed-off-by: Jiri Pirko <jiri@resnulli.us> Acked-by: Scott Feldman <sfeldma@gmail.com> Acked-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David Ahern <dsahern@gmail.com> Message-id: 1426306173-24884-7-git-send-email-sfeldma@gmail.com rocker: fix clang compiler errors Consolidate all forward typedef declarations to rocker.h. Signed-off-by: David Ahern <dsahern@gmail.com> Acked-by: Scott Feldman <sfeldma@gmail.com> Acked-by: Jiri Pirko <jiri@resnulli.us> rocker: add support for flow modification We had support for flow add/del. This adds support for flow mod. I needed this for L3 support where an existing route is modified using NLM_F_REPLACE. For example: ip route add 12.0.0.0/30 nexthop via 11.0.0.1 dev swp1 ip route change 12.0.0.0/30 nexthop via 11.0.0.9 dev swp2 The first cmd adds the route. The second cmd changes the existing route by changing its nexthop info. In the device, a mod operation results in the matching flow enty being modified with the new settings. This is atomic to the device. Signed-off-by: Scott Feldman <sfeldma@gmail.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-03-14 05:09:30 +01:00
/* set up memory-mapped region at BAR0 */
memory_region_init_io(&r->mmio, OBJECT(r), &rocker_mmio_ops, r,
"rocker-mmio", ROCKER_PCI_BAR0_SIZE);
pci_register_bar(dev, ROCKER_PCI_BAR0_IDX,
PCI_BASE_ADDRESS_SPACE_MEMORY, &r->mmio);
/* set up memory-mapped region for MSI-X */
memory_region_init(&r->msix_bar, OBJECT(r), "rocker-msix-bar",
ROCKER_PCI_MSIX_BAR_SIZE);
pci_register_bar(dev, ROCKER_PCI_MSIX_BAR_IDX,
PCI_BASE_ADDRESS_SPACE_MEMORY, &r->msix_bar);
/* MSI-X init */
err = rocker_msix_init(r, errp);
rocker: add new rocker switch device Rocker is a simulated ethernet switch device. The device supports up to 62 front-panel ports and supports L2 switching and L3 routing functions, as well as L2/L3/L4 ACLs. The device presents a single PCI device for each switch, with a memory-mapped register space for device driver access. Rocker device is invoked with -device, for example a 4-port switch: -device rocker,name=sw1,len-ports=4,ports[0]=dev0,ports[1]=dev1, \ ports[2]=dev2,ports[3]=dev3 Each port is a netdev and can be paired with using -netdev id=<port name>. Signed-off-by: Scott Feldman <sfeldma@gmail.com> Signed-off-by: Jiri Pirko <jiri@resnulli.us> Acked-by: Scott Feldman <sfeldma@gmail.com> Acked-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David Ahern <dsahern@gmail.com> Message-id: 1426306173-24884-7-git-send-email-sfeldma@gmail.com rocker: fix clang compiler errors Consolidate all forward typedef declarations to rocker.h. Signed-off-by: David Ahern <dsahern@gmail.com> Acked-by: Scott Feldman <sfeldma@gmail.com> Acked-by: Jiri Pirko <jiri@resnulli.us> rocker: add support for flow modification We had support for flow add/del. This adds support for flow mod. I needed this for L3 support where an existing route is modified using NLM_F_REPLACE. For example: ip route add 12.0.0.0/30 nexthop via 11.0.0.1 dev swp1 ip route change 12.0.0.0/30 nexthop via 11.0.0.9 dev swp2 The first cmd adds the route. The second cmd changes the existing route by changing its nexthop info. In the device, a mod operation results in the matching flow enty being modified with the new settings. This is atomic to the device. Signed-off-by: Scott Feldman <sfeldma@gmail.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-03-14 05:09:30 +01:00
if (err) {
goto err_msix_init;
}
/* validate switch properties */
if (!r->name) {
r->name = g_strdup(TYPE_ROCKER);
rocker: add new rocker switch device Rocker is a simulated ethernet switch device. The device supports up to 62 front-panel ports and supports L2 switching and L3 routing functions, as well as L2/L3/L4 ACLs. The device presents a single PCI device for each switch, with a memory-mapped register space for device driver access. Rocker device is invoked with -device, for example a 4-port switch: -device rocker,name=sw1,len-ports=4,ports[0]=dev0,ports[1]=dev1, \ ports[2]=dev2,ports[3]=dev3 Each port is a netdev and can be paired with using -netdev id=<port name>. Signed-off-by: Scott Feldman <sfeldma@gmail.com> Signed-off-by: Jiri Pirko <jiri@resnulli.us> Acked-by: Scott Feldman <sfeldma@gmail.com> Acked-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David Ahern <dsahern@gmail.com> Message-id: 1426306173-24884-7-git-send-email-sfeldma@gmail.com rocker: fix clang compiler errors Consolidate all forward typedef declarations to rocker.h. Signed-off-by: David Ahern <dsahern@gmail.com> Acked-by: Scott Feldman <sfeldma@gmail.com> Acked-by: Jiri Pirko <jiri@resnulli.us> rocker: add support for flow modification We had support for flow add/del. This adds support for flow mod. I needed this for L3 support where an existing route is modified using NLM_F_REPLACE. For example: ip route add 12.0.0.0/30 nexthop via 11.0.0.1 dev swp1 ip route change 12.0.0.0/30 nexthop via 11.0.0.9 dev swp2 The first cmd adds the route. The second cmd changes the existing route by changing its nexthop info. In the device, a mod operation results in the matching flow enty being modified with the new settings. This is atomic to the device. Signed-off-by: Scott Feldman <sfeldma@gmail.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-03-14 05:09:30 +01:00
}
if (rocker_find(r->name)) {
error_setg(errp, "%s already exists", r->name);
rocker: add new rocker switch device Rocker is a simulated ethernet switch device. The device supports up to 62 front-panel ports and supports L2 switching and L3 routing functions, as well as L2/L3/L4 ACLs. The device presents a single PCI device for each switch, with a memory-mapped register space for device driver access. Rocker device is invoked with -device, for example a 4-port switch: -device rocker,name=sw1,len-ports=4,ports[0]=dev0,ports[1]=dev1, \ ports[2]=dev2,ports[3]=dev3 Each port is a netdev and can be paired with using -netdev id=<port name>. Signed-off-by: Scott Feldman <sfeldma@gmail.com> Signed-off-by: Jiri Pirko <jiri@resnulli.us> Acked-by: Scott Feldman <sfeldma@gmail.com> Acked-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David Ahern <dsahern@gmail.com> Message-id: 1426306173-24884-7-git-send-email-sfeldma@gmail.com rocker: fix clang compiler errors Consolidate all forward typedef declarations to rocker.h. Signed-off-by: David Ahern <dsahern@gmail.com> Acked-by: Scott Feldman <sfeldma@gmail.com> Acked-by: Jiri Pirko <jiri@resnulli.us> rocker: add support for flow modification We had support for flow add/del. This adds support for flow mod. I needed this for L3 support where an existing route is modified using NLM_F_REPLACE. For example: ip route add 12.0.0.0/30 nexthop via 11.0.0.1 dev swp1 ip route change 12.0.0.0/30 nexthop via 11.0.0.9 dev swp2 The first cmd adds the route. The second cmd changes the existing route by changing its nexthop info. In the device, a mod operation results in the matching flow enty being modified with the new settings. This is atomic to the device. Signed-off-by: Scott Feldman <sfeldma@gmail.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-03-14 05:09:30 +01:00
goto err_duplicate;
}
/* Rocker name is passed in port name requests to OS with the intention
* that the name is used in interface names. Limit the length of the
* rocker name to avoid naming problems in the OS. Also, adding the
* port number as p# and unganged breakout b#, where # is at most 2
* digits, so leave room for it too (-1 for string terminator, -3 for
* p# and -3 for b#)
*/
#define ROCKER_IFNAMSIZ 16
#define MAX_ROCKER_NAME_LEN (ROCKER_IFNAMSIZ - 1 - 3 - 3)
if (strlen(r->name) > MAX_ROCKER_NAME_LEN) {
error_setg(errp,
"name too long; please shorten to at most %d chars",
MAX_ROCKER_NAME_LEN);
goto err_name_too_long;
}
rocker: add new rocker switch device Rocker is a simulated ethernet switch device. The device supports up to 62 front-panel ports and supports L2 switching and L3 routing functions, as well as L2/L3/L4 ACLs. The device presents a single PCI device for each switch, with a memory-mapped register space for device driver access. Rocker device is invoked with -device, for example a 4-port switch: -device rocker,name=sw1,len-ports=4,ports[0]=dev0,ports[1]=dev1, \ ports[2]=dev2,ports[3]=dev3 Each port is a netdev and can be paired with using -netdev id=<port name>. Signed-off-by: Scott Feldman <sfeldma@gmail.com> Signed-off-by: Jiri Pirko <jiri@resnulli.us> Acked-by: Scott Feldman <sfeldma@gmail.com> Acked-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David Ahern <dsahern@gmail.com> Message-id: 1426306173-24884-7-git-send-email-sfeldma@gmail.com rocker: fix clang compiler errors Consolidate all forward typedef declarations to rocker.h. Signed-off-by: David Ahern <dsahern@gmail.com> Acked-by: Scott Feldman <sfeldma@gmail.com> Acked-by: Jiri Pirko <jiri@resnulli.us> rocker: add support for flow modification We had support for flow add/del. This adds support for flow mod. I needed this for L3 support where an existing route is modified using NLM_F_REPLACE. For example: ip route add 12.0.0.0/30 nexthop via 11.0.0.1 dev swp1 ip route change 12.0.0.0/30 nexthop via 11.0.0.9 dev swp2 The first cmd adds the route. The second cmd changes the existing route by changing its nexthop info. In the device, a mod operation results in the matching flow enty being modified with the new settings. This is atomic to the device. Signed-off-by: Scott Feldman <sfeldma@gmail.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-03-14 05:09:30 +01:00
if (memcmp(&r->fp_start_macaddr, &zero, sizeof(zero)) == 0) {
memcpy(&r->fp_start_macaddr, &dflt, sizeof(dflt));
r->fp_start_macaddr.a[4] += (sw_index++);
}
if (!r->switch_id) {
memcpy(&r->switch_id, &r->fp_start_macaddr,
sizeof(r->fp_start_macaddr));
}
if (r->fp_ports > ROCKER_FP_PORTS_MAX) {
r->fp_ports = ROCKER_FP_PORTS_MAX;
}
r->rings = g_new(DescRing *, rocker_pci_ring_count(r));
rocker: add new rocker switch device Rocker is a simulated ethernet switch device. The device supports up to 62 front-panel ports and supports L2 switching and L3 routing functions, as well as L2/L3/L4 ACLs. The device presents a single PCI device for each switch, with a memory-mapped register space for device driver access. Rocker device is invoked with -device, for example a 4-port switch: -device rocker,name=sw1,len-ports=4,ports[0]=dev0,ports[1]=dev1, \ ports[2]=dev2,ports[3]=dev3 Each port is a netdev and can be paired with using -netdev id=<port name>. Signed-off-by: Scott Feldman <sfeldma@gmail.com> Signed-off-by: Jiri Pirko <jiri@resnulli.us> Acked-by: Scott Feldman <sfeldma@gmail.com> Acked-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David Ahern <dsahern@gmail.com> Message-id: 1426306173-24884-7-git-send-email-sfeldma@gmail.com rocker: fix clang compiler errors Consolidate all forward typedef declarations to rocker.h. Signed-off-by: David Ahern <dsahern@gmail.com> Acked-by: Scott Feldman <sfeldma@gmail.com> Acked-by: Jiri Pirko <jiri@resnulli.us> rocker: add support for flow modification We had support for flow add/del. This adds support for flow mod. I needed this for L3 support where an existing route is modified using NLM_F_REPLACE. For example: ip route add 12.0.0.0/30 nexthop via 11.0.0.1 dev swp1 ip route change 12.0.0.0/30 nexthop via 11.0.0.9 dev swp2 The first cmd adds the route. The second cmd changes the existing route by changing its nexthop info. In the device, a mod operation results in the matching flow enty being modified with the new settings. This is atomic to the device. Signed-off-by: Scott Feldman <sfeldma@gmail.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-03-14 05:09:30 +01:00
/* Rings are ordered like this:
* - command ring
* - event ring
* - port0 tx ring
* - port0 rx ring
* - port1 tx ring
* - port1 rx ring
* .....
*/
for (i = 0; i < rocker_pci_ring_count(r); i++) {
DescRing *ring = desc_ring_alloc(r, i);
if (i == ROCKER_RING_CMD) {
desc_ring_set_consume(ring, cmd_consume, ROCKER_MSIX_VEC_CMD);
} else if (i == ROCKER_RING_EVENT) {
desc_ring_set_consume(ring, NULL, ROCKER_MSIX_VEC_EVENT);
} else if (i % 2 == 0) {
desc_ring_set_consume(ring, tx_consume,
ROCKER_MSIX_VEC_TX((i - 2) / 2));
} else if (i % 2 == 1) {
desc_ring_set_consume(ring, NULL, ROCKER_MSIX_VEC_RX((i - 3) / 2));
}
r->rings[i] = ring;
}
for (i = 0; i < r->fp_ports; i++) {
FpPort *port =
fp_port_alloc(r, r->name, &r->fp_start_macaddr,
i, &r->fp_ports_peers[i]);
r->fp_port[i] = port;
fp_port_set_world(port, r->world_dflt);
}
QLIST_INSERT_HEAD(&rockers, r, next);
return;
rocker: add new rocker switch device Rocker is a simulated ethernet switch device. The device supports up to 62 front-panel ports and supports L2 switching and L3 routing functions, as well as L2/L3/L4 ACLs. The device presents a single PCI device for each switch, with a memory-mapped register space for device driver access. Rocker device is invoked with -device, for example a 4-port switch: -device rocker,name=sw1,len-ports=4,ports[0]=dev0,ports[1]=dev1, \ ports[2]=dev2,ports[3]=dev3 Each port is a netdev and can be paired with using -netdev id=<port name>. Signed-off-by: Scott Feldman <sfeldma@gmail.com> Signed-off-by: Jiri Pirko <jiri@resnulli.us> Acked-by: Scott Feldman <sfeldma@gmail.com> Acked-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David Ahern <dsahern@gmail.com> Message-id: 1426306173-24884-7-git-send-email-sfeldma@gmail.com rocker: fix clang compiler errors Consolidate all forward typedef declarations to rocker.h. Signed-off-by: David Ahern <dsahern@gmail.com> Acked-by: Scott Feldman <sfeldma@gmail.com> Acked-by: Jiri Pirko <jiri@resnulli.us> rocker: add support for flow modification We had support for flow add/del. This adds support for flow mod. I needed this for L3 support where an existing route is modified using NLM_F_REPLACE. For example: ip route add 12.0.0.0/30 nexthop via 11.0.0.1 dev swp1 ip route change 12.0.0.0/30 nexthop via 11.0.0.9 dev swp2 The first cmd adds the route. The second cmd changes the existing route by changing its nexthop info. In the device, a mod operation results in the matching flow enty being modified with the new settings. This is atomic to the device. Signed-off-by: Scott Feldman <sfeldma@gmail.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-03-14 05:09:30 +01:00
err_name_too_long:
rocker: add new rocker switch device Rocker is a simulated ethernet switch device. The device supports up to 62 front-panel ports and supports L2 switching and L3 routing functions, as well as L2/L3/L4 ACLs. The device presents a single PCI device for each switch, with a memory-mapped register space for device driver access. Rocker device is invoked with -device, for example a 4-port switch: -device rocker,name=sw1,len-ports=4,ports[0]=dev0,ports[1]=dev1, \ ports[2]=dev2,ports[3]=dev3 Each port is a netdev and can be paired with using -netdev id=<port name>. Signed-off-by: Scott Feldman <sfeldma@gmail.com> Signed-off-by: Jiri Pirko <jiri@resnulli.us> Acked-by: Scott Feldman <sfeldma@gmail.com> Acked-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David Ahern <dsahern@gmail.com> Message-id: 1426306173-24884-7-git-send-email-sfeldma@gmail.com rocker: fix clang compiler errors Consolidate all forward typedef declarations to rocker.h. Signed-off-by: David Ahern <dsahern@gmail.com> Acked-by: Scott Feldman <sfeldma@gmail.com> Acked-by: Jiri Pirko <jiri@resnulli.us> rocker: add support for flow modification We had support for flow add/del. This adds support for flow mod. I needed this for L3 support where an existing route is modified using NLM_F_REPLACE. For example: ip route add 12.0.0.0/30 nexthop via 11.0.0.1 dev swp1 ip route change 12.0.0.0/30 nexthop via 11.0.0.9 dev swp2 The first cmd adds the route. The second cmd changes the existing route by changing its nexthop info. In the device, a mod operation results in the matching flow enty being modified with the new settings. This is atomic to the device. Signed-off-by: Scott Feldman <sfeldma@gmail.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-03-14 05:09:30 +01:00
err_duplicate:
rocker_msix_uninit(r);
err_msix_init:
object_unparent(OBJECT(&r->msix_bar));
object_unparent(OBJECT(&r->mmio));
err_world_type_by_name:
rocker: add new rocker switch device Rocker is a simulated ethernet switch device. The device supports up to 62 front-panel ports and supports L2 switching and L3 routing functions, as well as L2/L3/L4 ACLs. The device presents a single PCI device for each switch, with a memory-mapped register space for device driver access. Rocker device is invoked with -device, for example a 4-port switch: -device rocker,name=sw1,len-ports=4,ports[0]=dev0,ports[1]=dev1, \ ports[2]=dev2,ports[3]=dev3 Each port is a netdev and can be paired with using -netdev id=<port name>. Signed-off-by: Scott Feldman <sfeldma@gmail.com> Signed-off-by: Jiri Pirko <jiri@resnulli.us> Acked-by: Scott Feldman <sfeldma@gmail.com> Acked-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David Ahern <dsahern@gmail.com> Message-id: 1426306173-24884-7-git-send-email-sfeldma@gmail.com rocker: fix clang compiler errors Consolidate all forward typedef declarations to rocker.h. Signed-off-by: David Ahern <dsahern@gmail.com> Acked-by: Scott Feldman <sfeldma@gmail.com> Acked-by: Jiri Pirko <jiri@resnulli.us> rocker: add support for flow modification We had support for flow add/del. This adds support for flow mod. I needed this for L3 support where an existing route is modified using NLM_F_REPLACE. For example: ip route add 12.0.0.0/30 nexthop via 11.0.0.1 dev swp1 ip route change 12.0.0.0/30 nexthop via 11.0.0.9 dev swp2 The first cmd adds the route. The second cmd changes the existing route by changing its nexthop info. In the device, a mod operation results in the matching flow enty being modified with the new settings. This is atomic to the device. Signed-off-by: Scott Feldman <sfeldma@gmail.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-03-14 05:09:30 +01:00
for (i = 0; i < ROCKER_WORLD_TYPE_MAX; i++) {
if (r->worlds[i]) {
world_free(r->worlds[i]);
}
}
}
static void pci_rocker_uninit(PCIDevice *dev)
{
Rocker *r = ROCKER(dev);
rocker: add new rocker switch device Rocker is a simulated ethernet switch device. The device supports up to 62 front-panel ports and supports L2 switching and L3 routing functions, as well as L2/L3/L4 ACLs. The device presents a single PCI device for each switch, with a memory-mapped register space for device driver access. Rocker device is invoked with -device, for example a 4-port switch: -device rocker,name=sw1,len-ports=4,ports[0]=dev0,ports[1]=dev1, \ ports[2]=dev2,ports[3]=dev3 Each port is a netdev and can be paired with using -netdev id=<port name>. Signed-off-by: Scott Feldman <sfeldma@gmail.com> Signed-off-by: Jiri Pirko <jiri@resnulli.us> Acked-by: Scott Feldman <sfeldma@gmail.com> Acked-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David Ahern <dsahern@gmail.com> Message-id: 1426306173-24884-7-git-send-email-sfeldma@gmail.com rocker: fix clang compiler errors Consolidate all forward typedef declarations to rocker.h. Signed-off-by: David Ahern <dsahern@gmail.com> Acked-by: Scott Feldman <sfeldma@gmail.com> Acked-by: Jiri Pirko <jiri@resnulli.us> rocker: add support for flow modification We had support for flow add/del. This adds support for flow mod. I needed this for L3 support where an existing route is modified using NLM_F_REPLACE. For example: ip route add 12.0.0.0/30 nexthop via 11.0.0.1 dev swp1 ip route change 12.0.0.0/30 nexthop via 11.0.0.9 dev swp2 The first cmd adds the route. The second cmd changes the existing route by changing its nexthop info. In the device, a mod operation results in the matching flow enty being modified with the new settings. This is atomic to the device. Signed-off-by: Scott Feldman <sfeldma@gmail.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-03-14 05:09:30 +01:00
int i;
QLIST_REMOVE(r, next);
for (i = 0; i < r->fp_ports; i++) {
FpPort *port = r->fp_port[i];
fp_port_free(port);
r->fp_port[i] = NULL;
}
for (i = 0; i < rocker_pci_ring_count(r); i++) {
if (r->rings[i]) {
desc_ring_free(r->rings[i]);
}
}
g_free(r->rings);
rocker_msix_uninit(r);
object_unparent(OBJECT(&r->msix_bar));
object_unparent(OBJECT(&r->mmio));
for (i = 0; i < ROCKER_WORLD_TYPE_MAX; i++) {
if (r->worlds[i]) {
world_free(r->worlds[i]);
}
}
g_free(r->fp_ports_peers);
}
static void rocker_reset(DeviceState *dev)
{
Rocker *r = ROCKER(dev);
rocker: add new rocker switch device Rocker is a simulated ethernet switch device. The device supports up to 62 front-panel ports and supports L2 switching and L3 routing functions, as well as L2/L3/L4 ACLs. The device presents a single PCI device for each switch, with a memory-mapped register space for device driver access. Rocker device is invoked with -device, for example a 4-port switch: -device rocker,name=sw1,len-ports=4,ports[0]=dev0,ports[1]=dev1, \ ports[2]=dev2,ports[3]=dev3 Each port is a netdev and can be paired with using -netdev id=<port name>. Signed-off-by: Scott Feldman <sfeldma@gmail.com> Signed-off-by: Jiri Pirko <jiri@resnulli.us> Acked-by: Scott Feldman <sfeldma@gmail.com> Acked-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David Ahern <dsahern@gmail.com> Message-id: 1426306173-24884-7-git-send-email-sfeldma@gmail.com rocker: fix clang compiler errors Consolidate all forward typedef declarations to rocker.h. Signed-off-by: David Ahern <dsahern@gmail.com> Acked-by: Scott Feldman <sfeldma@gmail.com> Acked-by: Jiri Pirko <jiri@resnulli.us> rocker: add support for flow modification We had support for flow add/del. This adds support for flow mod. I needed this for L3 support where an existing route is modified using NLM_F_REPLACE. For example: ip route add 12.0.0.0/30 nexthop via 11.0.0.1 dev swp1 ip route change 12.0.0.0/30 nexthop via 11.0.0.9 dev swp2 The first cmd adds the route. The second cmd changes the existing route by changing its nexthop info. In the device, a mod operation results in the matching flow enty being modified with the new settings. This is atomic to the device. Signed-off-by: Scott Feldman <sfeldma@gmail.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-03-14 05:09:30 +01:00
int i;
for (i = 0; i < ROCKER_WORLD_TYPE_MAX; i++) {
if (r->worlds[i]) {
world_reset(r->worlds[i]);
}
}
for (i = 0; i < r->fp_ports; i++) {
fp_port_reset(r->fp_port[i]);
fp_port_set_world(r->fp_port[i], r->world_dflt);
}
r->test_reg = 0;
r->test_reg64 = 0;
r->test_dma_addr = 0;
r->test_dma_size = 0;
for (i = 0; i < rocker_pci_ring_count(r); i++) {
desc_ring_reset(r->rings[i]);
}
DPRINTF("Reset done\n");
}
static Property rocker_properties[] = {
DEFINE_PROP_STRING("name", Rocker, name),
DEFINE_PROP_STRING("world", Rocker, world_name),
rocker: add new rocker switch device Rocker is a simulated ethernet switch device. The device supports up to 62 front-panel ports and supports L2 switching and L3 routing functions, as well as L2/L3/L4 ACLs. The device presents a single PCI device for each switch, with a memory-mapped register space for device driver access. Rocker device is invoked with -device, for example a 4-port switch: -device rocker,name=sw1,len-ports=4,ports[0]=dev0,ports[1]=dev1, \ ports[2]=dev2,ports[3]=dev3 Each port is a netdev and can be paired with using -netdev id=<port name>. Signed-off-by: Scott Feldman <sfeldma@gmail.com> Signed-off-by: Jiri Pirko <jiri@resnulli.us> Acked-by: Scott Feldman <sfeldma@gmail.com> Acked-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David Ahern <dsahern@gmail.com> Message-id: 1426306173-24884-7-git-send-email-sfeldma@gmail.com rocker: fix clang compiler errors Consolidate all forward typedef declarations to rocker.h. Signed-off-by: David Ahern <dsahern@gmail.com> Acked-by: Scott Feldman <sfeldma@gmail.com> Acked-by: Jiri Pirko <jiri@resnulli.us> rocker: add support for flow modification We had support for flow add/del. This adds support for flow mod. I needed this for L3 support where an existing route is modified using NLM_F_REPLACE. For example: ip route add 12.0.0.0/30 nexthop via 11.0.0.1 dev swp1 ip route change 12.0.0.0/30 nexthop via 11.0.0.9 dev swp2 The first cmd adds the route. The second cmd changes the existing route by changing its nexthop info. In the device, a mod operation results in the matching flow enty being modified with the new settings. This is atomic to the device. Signed-off-by: Scott Feldman <sfeldma@gmail.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-03-14 05:09:30 +01:00
DEFINE_PROP_MACADDR("fp_start_macaddr", Rocker,
fp_start_macaddr),
DEFINE_PROP_UINT64("switch_id", Rocker,
switch_id, 0),
DEFINE_PROP_ARRAY("ports", Rocker, fp_ports,
fp_ports_peers, qdev_prop_netdev, NICPeers),
DEFINE_PROP_END_OF_LIST(),
};
static const VMStateDescription rocker_vmsd = {
.name = TYPE_ROCKER,
rocker: add new rocker switch device Rocker is a simulated ethernet switch device. The device supports up to 62 front-panel ports and supports L2 switching and L3 routing functions, as well as L2/L3/L4 ACLs. The device presents a single PCI device for each switch, with a memory-mapped register space for device driver access. Rocker device is invoked with -device, for example a 4-port switch: -device rocker,name=sw1,len-ports=4,ports[0]=dev0,ports[1]=dev1, \ ports[2]=dev2,ports[3]=dev3 Each port is a netdev and can be paired with using -netdev id=<port name>. Signed-off-by: Scott Feldman <sfeldma@gmail.com> Signed-off-by: Jiri Pirko <jiri@resnulli.us> Acked-by: Scott Feldman <sfeldma@gmail.com> Acked-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David Ahern <dsahern@gmail.com> Message-id: 1426306173-24884-7-git-send-email-sfeldma@gmail.com rocker: fix clang compiler errors Consolidate all forward typedef declarations to rocker.h. Signed-off-by: David Ahern <dsahern@gmail.com> Acked-by: Scott Feldman <sfeldma@gmail.com> Acked-by: Jiri Pirko <jiri@resnulli.us> rocker: add support for flow modification We had support for flow add/del. This adds support for flow mod. I needed this for L3 support where an existing route is modified using NLM_F_REPLACE. For example: ip route add 12.0.0.0/30 nexthop via 11.0.0.1 dev swp1 ip route change 12.0.0.0/30 nexthop via 11.0.0.9 dev swp2 The first cmd adds the route. The second cmd changes the existing route by changing its nexthop info. In the device, a mod operation results in the matching flow enty being modified with the new settings. This is atomic to the device. Signed-off-by: Scott Feldman <sfeldma@gmail.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-03-14 05:09:30 +01:00
.unmigratable = 1,
};
static void rocker_class_init(ObjectClass *klass, void *data)
{
DeviceClass *dc = DEVICE_CLASS(klass);
PCIDeviceClass *k = PCI_DEVICE_CLASS(klass);
k->realize = pci_rocker_realize;
rocker: add new rocker switch device Rocker is a simulated ethernet switch device. The device supports up to 62 front-panel ports and supports L2 switching and L3 routing functions, as well as L2/L3/L4 ACLs. The device presents a single PCI device for each switch, with a memory-mapped register space for device driver access. Rocker device is invoked with -device, for example a 4-port switch: -device rocker,name=sw1,len-ports=4,ports[0]=dev0,ports[1]=dev1, \ ports[2]=dev2,ports[3]=dev3 Each port is a netdev and can be paired with using -netdev id=<port name>. Signed-off-by: Scott Feldman <sfeldma@gmail.com> Signed-off-by: Jiri Pirko <jiri@resnulli.us> Acked-by: Scott Feldman <sfeldma@gmail.com> Acked-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David Ahern <dsahern@gmail.com> Message-id: 1426306173-24884-7-git-send-email-sfeldma@gmail.com rocker: fix clang compiler errors Consolidate all forward typedef declarations to rocker.h. Signed-off-by: David Ahern <dsahern@gmail.com> Acked-by: Scott Feldman <sfeldma@gmail.com> Acked-by: Jiri Pirko <jiri@resnulli.us> rocker: add support for flow modification We had support for flow add/del. This adds support for flow mod. I needed this for L3 support where an existing route is modified using NLM_F_REPLACE. For example: ip route add 12.0.0.0/30 nexthop via 11.0.0.1 dev swp1 ip route change 12.0.0.0/30 nexthop via 11.0.0.9 dev swp2 The first cmd adds the route. The second cmd changes the existing route by changing its nexthop info. In the device, a mod operation results in the matching flow enty being modified with the new settings. This is atomic to the device. Signed-off-by: Scott Feldman <sfeldma@gmail.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-03-14 05:09:30 +01:00
k->exit = pci_rocker_uninit;
k->vendor_id = PCI_VENDOR_ID_REDHAT;
k->device_id = PCI_DEVICE_ID_REDHAT_ROCKER;
k->revision = ROCKER_PCI_REVISION;
k->class_id = PCI_CLASS_NETWORK_OTHER;
set_bit(DEVICE_CATEGORY_NETWORK, dc->categories);
dc->desc = "Rocker Switch";
dc->reset = rocker_reset;
device_class_set_props(dc, rocker_properties);
rocker: add new rocker switch device Rocker is a simulated ethernet switch device. The device supports up to 62 front-panel ports and supports L2 switching and L3 routing functions, as well as L2/L3/L4 ACLs. The device presents a single PCI device for each switch, with a memory-mapped register space for device driver access. Rocker device is invoked with -device, for example a 4-port switch: -device rocker,name=sw1,len-ports=4,ports[0]=dev0,ports[1]=dev1, \ ports[2]=dev2,ports[3]=dev3 Each port is a netdev and can be paired with using -netdev id=<port name>. Signed-off-by: Scott Feldman <sfeldma@gmail.com> Signed-off-by: Jiri Pirko <jiri@resnulli.us> Acked-by: Scott Feldman <sfeldma@gmail.com> Acked-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David Ahern <dsahern@gmail.com> Message-id: 1426306173-24884-7-git-send-email-sfeldma@gmail.com rocker: fix clang compiler errors Consolidate all forward typedef declarations to rocker.h. Signed-off-by: David Ahern <dsahern@gmail.com> Acked-by: Scott Feldman <sfeldma@gmail.com> Acked-by: Jiri Pirko <jiri@resnulli.us> rocker: add support for flow modification We had support for flow add/del. This adds support for flow mod. I needed this for L3 support where an existing route is modified using NLM_F_REPLACE. For example: ip route add 12.0.0.0/30 nexthop via 11.0.0.1 dev swp1 ip route change 12.0.0.0/30 nexthop via 11.0.0.9 dev swp2 The first cmd adds the route. The second cmd changes the existing route by changing its nexthop info. In the device, a mod operation results in the matching flow enty being modified with the new settings. This is atomic to the device. Signed-off-by: Scott Feldman <sfeldma@gmail.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-03-14 05:09:30 +01:00
dc->vmsd = &rocker_vmsd;
}
static const TypeInfo rocker_info = {
.name = TYPE_ROCKER,
rocker: add new rocker switch device Rocker is a simulated ethernet switch device. The device supports up to 62 front-panel ports and supports L2 switching and L3 routing functions, as well as L2/L3/L4 ACLs. The device presents a single PCI device for each switch, with a memory-mapped register space for device driver access. Rocker device is invoked with -device, for example a 4-port switch: -device rocker,name=sw1,len-ports=4,ports[0]=dev0,ports[1]=dev1, \ ports[2]=dev2,ports[3]=dev3 Each port is a netdev and can be paired with using -netdev id=<port name>. Signed-off-by: Scott Feldman <sfeldma@gmail.com> Signed-off-by: Jiri Pirko <jiri@resnulli.us> Acked-by: Scott Feldman <sfeldma@gmail.com> Acked-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David Ahern <dsahern@gmail.com> Message-id: 1426306173-24884-7-git-send-email-sfeldma@gmail.com rocker: fix clang compiler errors Consolidate all forward typedef declarations to rocker.h. Signed-off-by: David Ahern <dsahern@gmail.com> Acked-by: Scott Feldman <sfeldma@gmail.com> Acked-by: Jiri Pirko <jiri@resnulli.us> rocker: add support for flow modification We had support for flow add/del. This adds support for flow mod. I needed this for L3 support where an existing route is modified using NLM_F_REPLACE. For example: ip route add 12.0.0.0/30 nexthop via 11.0.0.1 dev swp1 ip route change 12.0.0.0/30 nexthop via 11.0.0.9 dev swp2 The first cmd adds the route. The second cmd changes the existing route by changing its nexthop info. In the device, a mod operation results in the matching flow enty being modified with the new settings. This is atomic to the device. Signed-off-by: Scott Feldman <sfeldma@gmail.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-03-14 05:09:30 +01:00
.parent = TYPE_PCI_DEVICE,
.instance_size = sizeof(Rocker),
.class_init = rocker_class_init,
pci: Add INTERFACE_CONVENTIONAL_PCI_DEVICE to Conventional PCI devices Add INTERFACE_CONVENTIONAL_PCI_DEVICE to all direct subtypes of TYPE_PCI_DEVICE, except: 1) The ones that already have INTERFACE_PCIE_DEVICE set: * base-xhci * e1000e * nvme * pvscsi * vfio-pci * virtio-pci * vmxnet3 2) base-pci-bridge Not all PCI bridges are Conventional PCI devices, so INTERFACE_CONVENTIONAL_PCI_DEVICE is added only to the subtypes that are actually Conventional PCI: * dec-21154-p2p-bridge * i82801b11-bridge * pbm-bridge * pci-bridge The direct subtypes of base-pci-bridge not touched by this patch are: * xilinx-pcie-root: Already marked as PCIe-only. * pcie-pci-bridge: Already marked as PCIe-only. * pcie-port: all non-abstract subtypes of pcie-port are already marked as PCIe-only devices. 3) megasas-base Not all megasas devices are Conventional PCI devices, so the interface names are added to the subclasses registered by megasas_register_types(), according to information in the megasas_devices[] array. "megasas-gen2" already implements INTERFACE_PCIE_DEVICE, so add INTERFACE_CONVENTIONAL_PCI_DEVICE only to "megasas". Acked-by: Alberto Garcia <berto@igalia.com> Acked-by: John Snow <jsnow@redhat.com> Acked-by: Anthony PERARD <anthony.perard@citrix.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Acked-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Marcel Apfelbaum <marcel@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2017-09-27 21:56:34 +02:00
.interfaces = (InterfaceInfo[]) {
{ INTERFACE_CONVENTIONAL_PCI_DEVICE },
{ },
},
rocker: add new rocker switch device Rocker is a simulated ethernet switch device. The device supports up to 62 front-panel ports and supports L2 switching and L3 routing functions, as well as L2/L3/L4 ACLs. The device presents a single PCI device for each switch, with a memory-mapped register space for device driver access. Rocker device is invoked with -device, for example a 4-port switch: -device rocker,name=sw1,len-ports=4,ports[0]=dev0,ports[1]=dev1, \ ports[2]=dev2,ports[3]=dev3 Each port is a netdev and can be paired with using -netdev id=<port name>. Signed-off-by: Scott Feldman <sfeldma@gmail.com> Signed-off-by: Jiri Pirko <jiri@resnulli.us> Acked-by: Scott Feldman <sfeldma@gmail.com> Acked-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David Ahern <dsahern@gmail.com> Message-id: 1426306173-24884-7-git-send-email-sfeldma@gmail.com rocker: fix clang compiler errors Consolidate all forward typedef declarations to rocker.h. Signed-off-by: David Ahern <dsahern@gmail.com> Acked-by: Scott Feldman <sfeldma@gmail.com> Acked-by: Jiri Pirko <jiri@resnulli.us> rocker: add support for flow modification We had support for flow add/del. This adds support for flow mod. I needed this for L3 support where an existing route is modified using NLM_F_REPLACE. For example: ip route add 12.0.0.0/30 nexthop via 11.0.0.1 dev swp1 ip route change 12.0.0.0/30 nexthop via 11.0.0.9 dev swp2 The first cmd adds the route. The second cmd changes the existing route by changing its nexthop info. In the device, a mod operation results in the matching flow enty being modified with the new settings. This is atomic to the device. Signed-off-by: Scott Feldman <sfeldma@gmail.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-03-14 05:09:30 +01:00
};
static void rocker_register_types(void)
{
type_register_static(&rocker_info);
}
type_init(rocker_register_types)