qemu-e2k/scripts/checkpatch.pl

3040 lines
83 KiB
Perl
Raw Normal View History

#!/usr/bin/env perl
# (c) 2001, Dave Jones. (the file handling bit)
# (c) 2005, Joel Schopp <jschopp@austin.ibm.com> (the ugly bit)
# (c) 2007,2008, Andy Whitcroft <apw@uk.ibm.com> (new conditions, test suite)
# (c) 2008-2010 Andy Whitcroft <apw@canonical.com>
# Licensed under the terms of the GNU GPL License version 2
use strict;
use warnings;
use Term::ANSIColor qw(:constants);
my $P = $0;
$P =~ s@.*/@@g;
our $SrcFile = qr{\.(?:h|c|cpp|s|S|pl|py|sh)$};
my $V = '0.31';
use Getopt::Long qw(:config no_auto_abbrev);
my $quiet = 0;
my $tree = 1;
my $chk_signoff = 1;
scripts: let checkpatch.pl process an entire GIT branch Currently before submitting a series, devs should run checkpatch.pl across each patch to be submitted. This can be automated using a command such as: git rebase -i master -x 'git show | ./scripts/checkpatch.pl -' This is rather long winded to type, so this patch introduces a way to tell checkpatch.pl to validate a series of GIT revisions. There are now three modes it can operate in 1) check a patch 2) check a source file, or 3) check a git branch. If no flags are given, the mode is determined by checking the args passed to the command. If the args contain a literal ".." it is treated as a GIT revision list. If the args end in ".patch" or equal "-" it is treated as a patch file. Otherwise it is treated as a source file. This automatic guessing can be overridden using --[no-]patch --[no-]file or --[no-]branch For example to check a GIT revision list: $ ./scripts/checkpatch.pl master.. total: 0 errors, 0 warnings, 297 lines checked b886d352a2bf58f0996471fb3991a138373a2957 has no obvious style problems and is ready for submission. total: 0 errors, 0 warnings, 182 lines checked 2a731f9a9ce145e0e0df6d42dd2a3ce4dfc543fa has no obvious style problems and is ready for submission. total: 0 errors, 0 warnings, 102 lines checked 11844169bcc0c8ed4449eb3744a69877ed329dd7 has no obvious style problems and is ready for submission. If a genuine patch filename contains the characters '..' it is possible to force interpretation of the arg as a patch $ ./scripts/checkpatch.pl --patch master.. will force it to load a patch file called "master..", or equivalently $ ./scripts/checkpatch.pl --no-branch master.. will simply turn off guessing of GIT revision lists. Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Message-Id: <20170913091000.9005-1-berrange@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-09-13 11:10:00 +02:00
my $chk_patch = undef;
my $chk_branch = undef;
my $tst_only;
my $emacs = 0;
my $terse = 0;
scripts: let checkpatch.pl process an entire GIT branch Currently before submitting a series, devs should run checkpatch.pl across each patch to be submitted. This can be automated using a command such as: git rebase -i master -x 'git show | ./scripts/checkpatch.pl -' This is rather long winded to type, so this patch introduces a way to tell checkpatch.pl to validate a series of GIT revisions. There are now three modes it can operate in 1) check a patch 2) check a source file, or 3) check a git branch. If no flags are given, the mode is determined by checking the args passed to the command. If the args contain a literal ".." it is treated as a GIT revision list. If the args end in ".patch" or equal "-" it is treated as a patch file. Otherwise it is treated as a source file. This automatic guessing can be overridden using --[no-]patch --[no-]file or --[no-]branch For example to check a GIT revision list: $ ./scripts/checkpatch.pl master.. total: 0 errors, 0 warnings, 297 lines checked b886d352a2bf58f0996471fb3991a138373a2957 has no obvious style problems and is ready for submission. total: 0 errors, 0 warnings, 182 lines checked 2a731f9a9ce145e0e0df6d42dd2a3ce4dfc543fa has no obvious style problems and is ready for submission. total: 0 errors, 0 warnings, 102 lines checked 11844169bcc0c8ed4449eb3744a69877ed329dd7 has no obvious style problems and is ready for submission. If a genuine patch filename contains the characters '..' it is possible to force interpretation of the arg as a patch $ ./scripts/checkpatch.pl --patch master.. will force it to load a patch file called "master..", or equivalently $ ./scripts/checkpatch.pl --no-branch master.. will simply turn off guessing of GIT revision lists. Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Message-Id: <20170913091000.9005-1-berrange@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-09-13 11:10:00 +02:00
my $file = undef;
my $color = "auto";
my $no_warnings = 0;
my $summary = 1;
my $mailback = 0;
my $summary_file = 0;
my $root;
my %debug;
my $help = 0;
sub help {
my ($exitcode) = @_;
print << "EOM";
scripts: let checkpatch.pl process an entire GIT branch Currently before submitting a series, devs should run checkpatch.pl across each patch to be submitted. This can be automated using a command such as: git rebase -i master -x 'git show | ./scripts/checkpatch.pl -' This is rather long winded to type, so this patch introduces a way to tell checkpatch.pl to validate a series of GIT revisions. There are now three modes it can operate in 1) check a patch 2) check a source file, or 3) check a git branch. If no flags are given, the mode is determined by checking the args passed to the command. If the args contain a literal ".." it is treated as a GIT revision list. If the args end in ".patch" or equal "-" it is treated as a patch file. Otherwise it is treated as a source file. This automatic guessing can be overridden using --[no-]patch --[no-]file or --[no-]branch For example to check a GIT revision list: $ ./scripts/checkpatch.pl master.. total: 0 errors, 0 warnings, 297 lines checked b886d352a2bf58f0996471fb3991a138373a2957 has no obvious style problems and is ready for submission. total: 0 errors, 0 warnings, 182 lines checked 2a731f9a9ce145e0e0df6d42dd2a3ce4dfc543fa has no obvious style problems and is ready for submission. total: 0 errors, 0 warnings, 102 lines checked 11844169bcc0c8ed4449eb3744a69877ed329dd7 has no obvious style problems and is ready for submission. If a genuine patch filename contains the characters '..' it is possible to force interpretation of the arg as a patch $ ./scripts/checkpatch.pl --patch master.. will force it to load a patch file called "master..", or equivalently $ ./scripts/checkpatch.pl --no-branch master.. will simply turn off guessing of GIT revision lists. Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Message-Id: <20170913091000.9005-1-berrange@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-09-13 11:10:00 +02:00
Usage:
$P [OPTION]... [FILE]...
$P [OPTION]... [GIT-REV-LIST]
Version: $V
Options:
-q, --quiet quiet
--no-tree run without a qemu tree
--no-signoff do not check for 'Signed-off-by' line
scripts: let checkpatch.pl process an entire GIT branch Currently before submitting a series, devs should run checkpatch.pl across each patch to be submitted. This can be automated using a command such as: git rebase -i master -x 'git show | ./scripts/checkpatch.pl -' This is rather long winded to type, so this patch introduces a way to tell checkpatch.pl to validate a series of GIT revisions. There are now three modes it can operate in 1) check a patch 2) check a source file, or 3) check a git branch. If no flags are given, the mode is determined by checking the args passed to the command. If the args contain a literal ".." it is treated as a GIT revision list. If the args end in ".patch" or equal "-" it is treated as a patch file. Otherwise it is treated as a source file. This automatic guessing can be overridden using --[no-]patch --[no-]file or --[no-]branch For example to check a GIT revision list: $ ./scripts/checkpatch.pl master.. total: 0 errors, 0 warnings, 297 lines checked b886d352a2bf58f0996471fb3991a138373a2957 has no obvious style problems and is ready for submission. total: 0 errors, 0 warnings, 182 lines checked 2a731f9a9ce145e0e0df6d42dd2a3ce4dfc543fa has no obvious style problems and is ready for submission. total: 0 errors, 0 warnings, 102 lines checked 11844169bcc0c8ed4449eb3744a69877ed329dd7 has no obvious style problems and is ready for submission. If a genuine patch filename contains the characters '..' it is possible to force interpretation of the arg as a patch $ ./scripts/checkpatch.pl --patch master.. will force it to load a patch file called "master..", or equivalently $ ./scripts/checkpatch.pl --no-branch master.. will simply turn off guessing of GIT revision lists. Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Message-Id: <20170913091000.9005-1-berrange@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-09-13 11:10:00 +02:00
--patch treat FILE as patchfile
--branch treat args as GIT revision list
--emacs emacs compile window format
--terse one line per report
-f, --file treat FILE as regular source file
--strict fail if only warnings are found
--root=PATH PATH to the qemu tree root
--no-summary suppress the per-file summary
--mailback only produce a report in case of warnings/errors
--summary-file include the filename in summary
--debug KEY=[0|1] turn on/off debugging of KEY, where KEY is one of
'values', 'possible', 'type', and 'attr' (default
is all off)
--test-only=WORD report only warnings/errors containing WORD
literally
--color[=WHEN] Use colors 'always', 'never', or only when output
is a terminal ('auto'). Default is 'auto'.
-h, --help, --version display this help and exit
When FILE is - read standard input.
EOM
exit($exitcode);
}
# Perl's Getopt::Long allows options to take optional arguments after a space.
# Prevent --color by itself from consuming other arguments
foreach (@ARGV) {
if ($_ eq "--color" || $_ eq "-color") {
$_ = "--color=$color";
}
}
GetOptions(
'q|quiet+' => \$quiet,
'tree!' => \$tree,
'signoff!' => \$chk_signoff,
'patch!' => \$chk_patch,
scripts: let checkpatch.pl process an entire GIT branch Currently before submitting a series, devs should run checkpatch.pl across each patch to be submitted. This can be automated using a command such as: git rebase -i master -x 'git show | ./scripts/checkpatch.pl -' This is rather long winded to type, so this patch introduces a way to tell checkpatch.pl to validate a series of GIT revisions. There are now three modes it can operate in 1) check a patch 2) check a source file, or 3) check a git branch. If no flags are given, the mode is determined by checking the args passed to the command. If the args contain a literal ".." it is treated as a GIT revision list. If the args end in ".patch" or equal "-" it is treated as a patch file. Otherwise it is treated as a source file. This automatic guessing can be overridden using --[no-]patch --[no-]file or --[no-]branch For example to check a GIT revision list: $ ./scripts/checkpatch.pl master.. total: 0 errors, 0 warnings, 297 lines checked b886d352a2bf58f0996471fb3991a138373a2957 has no obvious style problems and is ready for submission. total: 0 errors, 0 warnings, 182 lines checked 2a731f9a9ce145e0e0df6d42dd2a3ce4dfc543fa has no obvious style problems and is ready for submission. total: 0 errors, 0 warnings, 102 lines checked 11844169bcc0c8ed4449eb3744a69877ed329dd7 has no obvious style problems and is ready for submission. If a genuine patch filename contains the characters '..' it is possible to force interpretation of the arg as a patch $ ./scripts/checkpatch.pl --patch master.. will force it to load a patch file called "master..", or equivalently $ ./scripts/checkpatch.pl --no-branch master.. will simply turn off guessing of GIT revision lists. Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Message-Id: <20170913091000.9005-1-berrange@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-09-13 11:10:00 +02:00
'branch!' => \$chk_branch,
'emacs!' => \$emacs,
'terse!' => \$terse,
'f|file!' => \$file,
'strict!' => \$no_warnings,
'root=s' => \$root,
'summary!' => \$summary,
'mailback!' => \$mailback,
'summary-file!' => \$summary_file,
'debug=s' => \%debug,
'test-only=s' => \$tst_only,
'color=s' => \$color,
'no-color' => sub { $color = 'never'; },
'h|help' => \$help,
'version' => \$help
) or help(1);
help(0) if ($help);
my $exit = 0;
if ($#ARGV < 0) {
print "$P: no input files\n";
exit(1);
}
scripts: let checkpatch.pl process an entire GIT branch Currently before submitting a series, devs should run checkpatch.pl across each patch to be submitted. This can be automated using a command such as: git rebase -i master -x 'git show | ./scripts/checkpatch.pl -' This is rather long winded to type, so this patch introduces a way to tell checkpatch.pl to validate a series of GIT revisions. There are now three modes it can operate in 1) check a patch 2) check a source file, or 3) check a git branch. If no flags are given, the mode is determined by checking the args passed to the command. If the args contain a literal ".." it is treated as a GIT revision list. If the args end in ".patch" or equal "-" it is treated as a patch file. Otherwise it is treated as a source file. This automatic guessing can be overridden using --[no-]patch --[no-]file or --[no-]branch For example to check a GIT revision list: $ ./scripts/checkpatch.pl master.. total: 0 errors, 0 warnings, 297 lines checked b886d352a2bf58f0996471fb3991a138373a2957 has no obvious style problems and is ready for submission. total: 0 errors, 0 warnings, 182 lines checked 2a731f9a9ce145e0e0df6d42dd2a3ce4dfc543fa has no obvious style problems and is ready for submission. total: 0 errors, 0 warnings, 102 lines checked 11844169bcc0c8ed4449eb3744a69877ed329dd7 has no obvious style problems and is ready for submission. If a genuine patch filename contains the characters '..' it is possible to force interpretation of the arg as a patch $ ./scripts/checkpatch.pl --patch master.. will force it to load a patch file called "master..", or equivalently $ ./scripts/checkpatch.pl --no-branch master.. will simply turn off guessing of GIT revision lists. Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Message-Id: <20170913091000.9005-1-berrange@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-09-13 11:10:00 +02:00
if (!defined $chk_branch && !defined $chk_patch && !defined $file) {
$chk_branch = $ARGV[0] =~ /.\.\./ ? 1 : 0;
$file = $ARGV[0] =~ /$SrcFile/ ? 1 : 0;
$chk_patch = $chk_branch || $file ? 0 : 1;
scripts: let checkpatch.pl process an entire GIT branch Currently before submitting a series, devs should run checkpatch.pl across each patch to be submitted. This can be automated using a command such as: git rebase -i master -x 'git show | ./scripts/checkpatch.pl -' This is rather long winded to type, so this patch introduces a way to tell checkpatch.pl to validate a series of GIT revisions. There are now three modes it can operate in 1) check a patch 2) check a source file, or 3) check a git branch. If no flags are given, the mode is determined by checking the args passed to the command. If the args contain a literal ".." it is treated as a GIT revision list. If the args end in ".patch" or equal "-" it is treated as a patch file. Otherwise it is treated as a source file. This automatic guessing can be overridden using --[no-]patch --[no-]file or --[no-]branch For example to check a GIT revision list: $ ./scripts/checkpatch.pl master.. total: 0 errors, 0 warnings, 297 lines checked b886d352a2bf58f0996471fb3991a138373a2957 has no obvious style problems and is ready for submission. total: 0 errors, 0 warnings, 182 lines checked 2a731f9a9ce145e0e0df6d42dd2a3ce4dfc543fa has no obvious style problems and is ready for submission. total: 0 errors, 0 warnings, 102 lines checked 11844169bcc0c8ed4449eb3744a69877ed329dd7 has no obvious style problems and is ready for submission. If a genuine patch filename contains the characters '..' it is possible to force interpretation of the arg as a patch $ ./scripts/checkpatch.pl --patch master.. will force it to load a patch file called "master..", or equivalently $ ./scripts/checkpatch.pl --no-branch master.. will simply turn off guessing of GIT revision lists. Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Message-Id: <20170913091000.9005-1-berrange@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-09-13 11:10:00 +02:00
} elsif (!defined $chk_branch && !defined $chk_patch) {
if ($file) {
$chk_branch = $chk_patch = 0;
} else {
$chk_branch = $ARGV[0] =~ /.\.\./ ? 1 : 0;
scripts: let checkpatch.pl process an entire GIT branch Currently before submitting a series, devs should run checkpatch.pl across each patch to be submitted. This can be automated using a command such as: git rebase -i master -x 'git show | ./scripts/checkpatch.pl -' This is rather long winded to type, so this patch introduces a way to tell checkpatch.pl to validate a series of GIT revisions. There are now three modes it can operate in 1) check a patch 2) check a source file, or 3) check a git branch. If no flags are given, the mode is determined by checking the args passed to the command. If the args contain a literal ".." it is treated as a GIT revision list. If the args end in ".patch" or equal "-" it is treated as a patch file. Otherwise it is treated as a source file. This automatic guessing can be overridden using --[no-]patch --[no-]file or --[no-]branch For example to check a GIT revision list: $ ./scripts/checkpatch.pl master.. total: 0 errors, 0 warnings, 297 lines checked b886d352a2bf58f0996471fb3991a138373a2957 has no obvious style problems and is ready for submission. total: 0 errors, 0 warnings, 182 lines checked 2a731f9a9ce145e0e0df6d42dd2a3ce4dfc543fa has no obvious style problems and is ready for submission. total: 0 errors, 0 warnings, 102 lines checked 11844169bcc0c8ed4449eb3744a69877ed329dd7 has no obvious style problems and is ready for submission. If a genuine patch filename contains the characters '..' it is possible to force interpretation of the arg as a patch $ ./scripts/checkpatch.pl --patch master.. will force it to load a patch file called "master..", or equivalently $ ./scripts/checkpatch.pl --no-branch master.. will simply turn off guessing of GIT revision lists. Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Message-Id: <20170913091000.9005-1-berrange@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-09-13 11:10:00 +02:00
$chk_patch = $chk_branch ? 0 : 1;
}
} elsif (!defined $chk_branch && !defined $file) {
if ($chk_patch) {
$chk_branch = $file = 0;
} else {
$chk_branch = $ARGV[0] =~ /.\.\./ ? 1 : 0;
scripts: let checkpatch.pl process an entire GIT branch Currently before submitting a series, devs should run checkpatch.pl across each patch to be submitted. This can be automated using a command such as: git rebase -i master -x 'git show | ./scripts/checkpatch.pl -' This is rather long winded to type, so this patch introduces a way to tell checkpatch.pl to validate a series of GIT revisions. There are now three modes it can operate in 1) check a patch 2) check a source file, or 3) check a git branch. If no flags are given, the mode is determined by checking the args passed to the command. If the args contain a literal ".." it is treated as a GIT revision list. If the args end in ".patch" or equal "-" it is treated as a patch file. Otherwise it is treated as a source file. This automatic guessing can be overridden using --[no-]patch --[no-]file or --[no-]branch For example to check a GIT revision list: $ ./scripts/checkpatch.pl master.. total: 0 errors, 0 warnings, 297 lines checked b886d352a2bf58f0996471fb3991a138373a2957 has no obvious style problems and is ready for submission. total: 0 errors, 0 warnings, 182 lines checked 2a731f9a9ce145e0e0df6d42dd2a3ce4dfc543fa has no obvious style problems and is ready for submission. total: 0 errors, 0 warnings, 102 lines checked 11844169bcc0c8ed4449eb3744a69877ed329dd7 has no obvious style problems and is ready for submission. If a genuine patch filename contains the characters '..' it is possible to force interpretation of the arg as a patch $ ./scripts/checkpatch.pl --patch master.. will force it to load a patch file called "master..", or equivalently $ ./scripts/checkpatch.pl --no-branch master.. will simply turn off guessing of GIT revision lists. Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Message-Id: <20170913091000.9005-1-berrange@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-09-13 11:10:00 +02:00
$file = $chk_branch ? 0 : 1;
}
} elsif (!defined $chk_patch && !defined $file) {
if ($chk_branch) {
$chk_patch = $file = 0;
} else {
$file = $ARGV[0] =~ /$SrcFile/ ? 1 : 0;
$chk_patch = $file ? 0 : 1;
scripts: let checkpatch.pl process an entire GIT branch Currently before submitting a series, devs should run checkpatch.pl across each patch to be submitted. This can be automated using a command such as: git rebase -i master -x 'git show | ./scripts/checkpatch.pl -' This is rather long winded to type, so this patch introduces a way to tell checkpatch.pl to validate a series of GIT revisions. There are now three modes it can operate in 1) check a patch 2) check a source file, or 3) check a git branch. If no flags are given, the mode is determined by checking the args passed to the command. If the args contain a literal ".." it is treated as a GIT revision list. If the args end in ".patch" or equal "-" it is treated as a patch file. Otherwise it is treated as a source file. This automatic guessing can be overridden using --[no-]patch --[no-]file or --[no-]branch For example to check a GIT revision list: $ ./scripts/checkpatch.pl master.. total: 0 errors, 0 warnings, 297 lines checked b886d352a2bf58f0996471fb3991a138373a2957 has no obvious style problems and is ready for submission. total: 0 errors, 0 warnings, 182 lines checked 2a731f9a9ce145e0e0df6d42dd2a3ce4dfc543fa has no obvious style problems and is ready for submission. total: 0 errors, 0 warnings, 102 lines checked 11844169bcc0c8ed4449eb3744a69877ed329dd7 has no obvious style problems and is ready for submission. If a genuine patch filename contains the characters '..' it is possible to force interpretation of the arg as a patch $ ./scripts/checkpatch.pl --patch master.. will force it to load a patch file called "master..", or equivalently $ ./scripts/checkpatch.pl --no-branch master.. will simply turn off guessing of GIT revision lists. Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Message-Id: <20170913091000.9005-1-berrange@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-09-13 11:10:00 +02:00
}
} elsif (!defined $chk_branch) {
$chk_branch = $chk_patch || $file ? 0 : 1;
} elsif (!defined $chk_patch) {
$chk_patch = $chk_branch || $file ? 0 : 1;
} elsif (!defined $file) {
$file = $chk_patch || $chk_branch ? 0 : 1;
}
if (($chk_patch && $chk_branch) ||
($chk_patch && $file) ||
($chk_branch && $file)) {
die "Only one of --file, --branch, --patch is permitted\n";
}
if (!$chk_patch && !$chk_branch && !$file) {
die "One of --file, --branch, --patch is required\n";
}
if ($color =~ /^always$/i) {
$color = 1;
} elsif ($color =~ /^never$/i) {
$color = 0;
} elsif ($color =~ /^auto$/i) {
$color = (-t STDOUT);
} else {
die "Invalid color mode: $color\n";
}
my $dbg_values = 0;
my $dbg_possible = 0;
my $dbg_type = 0;
my $dbg_attr = 0;
my $dbg_adv_dcs = 0;
my $dbg_adv_checking = 0;
my $dbg_adv_apw = 0;
for my $key (keys %debug) {
## no critic
eval "\${dbg_$key} = '$debug{$key}';";
die "$@" if ($@);
}
my $rpt_cleaners = 0;
if ($terse) {
$emacs = 1;
$quiet++;
}
if ($tree) {
if (defined $root) {
if (!top_of_kernel_tree($root)) {
die "$P: $root: --root does not point at a valid tree\n";
}
} else {
if (top_of_kernel_tree('.')) {
$root = '.';
} elsif ($0 =~ m@(.*)/scripts/[^/]*$@ &&
top_of_kernel_tree($1)) {
$root = $1;
}
}
if (!defined $root) {
print "Must be run from the top-level dir. of a qemu tree\n";
exit(2);
}
}
my $emitted_corrupt = 0;
our $Ident = qr{
[A-Za-z_][A-Za-z\d_]*
(?:\s*\#\#\s*[A-Za-z_][A-Za-z\d_]*)*
}x;
our $Storage = qr{extern|static|asmlinkage};
our $Sparse = qr{
__force
}x;
# Notes to $Attribute:
our $Attribute = qr{
const|
volatile|
QEMU_NORETURN|
QEMU_WARN_UNUSED_RESULT|
QEMU_SENTINEL|
QEMU_PACKED|
GCC_FMT_ATTR
}x;
our $Modifier;
our $Inline = qr{inline};
our $Member = qr{->$Ident|\.$Ident|\[[^]]*\]};
our $Lval = qr{$Ident(?:$Member)*};
our $Constant = qr{(?:[0-9]+|0x[0-9a-fA-F]+)[UL]*};
our $Assignment = qr{(?:\*\=|/=|%=|\+=|-=|<<=|>>=|&=|\^=|\|=|=)};
our $Compare = qr{<=|>=|==|!=|<|>};
our $Operators = qr{
<=|>=|==|!=|
=>|->|<<|>>|<|>|!|~|
&&|\|\||,|\^|\+\+|--|&|\||\+|-|\*|\/|%
}x;
our $NonptrType;
our $Type;
our $Declare;
our $NON_ASCII_UTF8 = qr{
[\xC2-\xDF][\x80-\xBF] # non-overlong 2-byte
| \xE0[\xA0-\xBF][\x80-\xBF] # excluding overlongs
| [\xE1-\xEC\xEE\xEF][\x80-\xBF]{2} # straight 3-byte
| \xED[\x80-\x9F][\x80-\xBF] # excluding surrogates
| \xF0[\x90-\xBF][\x80-\xBF]{2} # planes 1-3
| [\xF1-\xF3][\x80-\xBF]{3} # planes 4-15
| \xF4[\x80-\x8F][\x80-\xBF]{2} # plane 16
}x;
our $UTF8 = qr{
[\x09\x0A\x0D\x20-\x7E] # ASCII
| $NON_ASCII_UTF8
}x;
# some readers default to ISO-8859-1 when showing email source. detect
# when UTF-8 is incorrectly interpreted as ISO-8859-1 and reencoded back.
# False positives are possible but very unlikely.
our $UTF8_MOJIBAKE = qr{
\xC3[\x82-\x9F] \xC2[\x80-\xBF] # c2-df 80-bf
| \xC3\xA0 \xC2[\xA0-\xBF] \xC2[\x80-\xBF] # e0 a0-bf 80-bf
| \xC3[\xA1-\xAC\xAE\xAF] (?: \xC2[\x80-\xBF]){2} # e1-ec/ee/ef 80-bf 80-bf
| \xC3\xAD \xC2[\x80-\x9F] \xC2[\x80-\xBF] # ed 80-9f 80-bf
| \xC3\xB0 \xC2[\x90-\xBF] (?: \xC2[\x80-\xBF]){2} # f0 90-bf 80-bf 80-bf
| \xC3[\xB1-\xB3] (?: \xC2[\x80-\xBF]){3} # f1-f3 80-bf 80-bf 80-bf
| \xC3\xB4 \xC2[\x80-\x8F] (?: \xC2[\x80-\xBF]){2} # f4 80-b8 80-bf 80-bf
}x;
# There are still some false positives, but this catches most
# common cases.
our $typeTypedefs = qr{(?x:
(?![KMGTPE]iB) # IEC binary prefix (do not match)
[A-Z][A-Z\d_]*[a-z][A-Za-z\d_]* # camelcase
| [A-Z][A-Z\d_]*AIOCB # all uppercase
| [A-Z][A-Z\d_]*CPU # all uppercase
| QEMUBH # all uppercase
)};
our @typeList = (
qr{void},
qr{(?:unsigned\s+)?char},
qr{(?:unsigned\s+)?short},
qr{(?:unsigned\s+)?int},
qr{(?:unsigned\s+)?long},
qr{(?:unsigned\s+)?long\s+int},
qr{(?:unsigned\s+)?long\s+long},
qr{(?:unsigned\s+)?long\s+long\s+int},
qr{unsigned},
qr{float},
qr{double},
qr{bool},
qr{struct\s+$Ident},
qr{union\s+$Ident},
qr{enum\s+$Ident},
qr{${Ident}_t},
qr{${Ident}_handler},
qr{${Ident}_handler_fn},
qr{target_(?:u)?long},
qr{hwaddr},
# external libraries
qr{xml${Ident}},
qr{xen\w+_handle},
# Glib definitions
qr{gchar},
qr{gshort},
qr{glong},
qr{gint},
qr{gboolean},
qr{guchar},
qr{gushort},
qr{gulong},
qr{guint},
qr{gfloat},
qr{gdouble},
qr{gpointer},
qr{gconstpointer},
qr{gint8},
qr{guint8},
qr{gint16},
qr{guint16},
qr{gint32},
qr{guint32},
qr{gint64},
qr{guint64},
qr{gsize},
qr{gssize},
qr{goffset},
qr{gintptr},
qr{guintptr},
);
# This can be modified by sub possible. Since it can be empty, be careful
# about regexes that always match, because they can cause infinite loops.
our @modifierList = (
);
sub build_types {
my $all = "(?x: \n" . join("|\n ", @typeList) . "\n)";
if (@modifierList > 0) {
my $mods = "(?x: \n" . join("|\n ", @modifierList) . "\n)";
$Modifier = qr{(?:$Attribute|$Sparse|$mods)};
} else {
$Modifier = qr{(?:$Attribute|$Sparse)};
}
$NonptrType = qr{
(?:$Modifier\s+|const\s+)*
(?:
(?:typeof|__typeof__)\s*\(\s*\**\s*$Ident\s*\)|
(?:$typeTypedefs\b)|
(?:${all}\b)
)
(?:\s+$Modifier|\s+const)*
}x;
$Type = qr{
$NonptrType
(?:[\s\*]+\s*const|[\s\*]+|(?:\s*\[\s*\])+)?
(?:\s+$Inline|\s+$Modifier)*
}x;
$Declare = qr{(?:$Storage\s+)?$Type};
}
build_types();
$chk_signoff = 0 if ($file);
my @rawlines = ();
my @lines = ();
my $vname;
scripts: let checkpatch.pl process an entire GIT branch Currently before submitting a series, devs should run checkpatch.pl across each patch to be submitted. This can be automated using a command such as: git rebase -i master -x 'git show | ./scripts/checkpatch.pl -' This is rather long winded to type, so this patch introduces a way to tell checkpatch.pl to validate a series of GIT revisions. There are now three modes it can operate in 1) check a patch 2) check a source file, or 3) check a git branch. If no flags are given, the mode is determined by checking the args passed to the command. If the args contain a literal ".." it is treated as a GIT revision list. If the args end in ".patch" or equal "-" it is treated as a patch file. Otherwise it is treated as a source file. This automatic guessing can be overridden using --[no-]patch --[no-]file or --[no-]branch For example to check a GIT revision list: $ ./scripts/checkpatch.pl master.. total: 0 errors, 0 warnings, 297 lines checked b886d352a2bf58f0996471fb3991a138373a2957 has no obvious style problems and is ready for submission. total: 0 errors, 0 warnings, 182 lines checked 2a731f9a9ce145e0e0df6d42dd2a3ce4dfc543fa has no obvious style problems and is ready for submission. total: 0 errors, 0 warnings, 102 lines checked 11844169bcc0c8ed4449eb3744a69877ed329dd7 has no obvious style problems and is ready for submission. If a genuine patch filename contains the characters '..' it is possible to force interpretation of the arg as a patch $ ./scripts/checkpatch.pl --patch master.. will force it to load a patch file called "master..", or equivalently $ ./scripts/checkpatch.pl --no-branch master.. will simply turn off guessing of GIT revision lists. Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Message-Id: <20170913091000.9005-1-berrange@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-09-13 11:10:00 +02:00
if ($chk_branch) {
my @patches;
my %git_commits = ();
scripts: let checkpatch.pl process an entire GIT branch Currently before submitting a series, devs should run checkpatch.pl across each patch to be submitted. This can be automated using a command such as: git rebase -i master -x 'git show | ./scripts/checkpatch.pl -' This is rather long winded to type, so this patch introduces a way to tell checkpatch.pl to validate a series of GIT revisions. There are now three modes it can operate in 1) check a patch 2) check a source file, or 3) check a git branch. If no flags are given, the mode is determined by checking the args passed to the command. If the args contain a literal ".." it is treated as a GIT revision list. If the args end in ".patch" or equal "-" it is treated as a patch file. Otherwise it is treated as a source file. This automatic guessing can be overridden using --[no-]patch --[no-]file or --[no-]branch For example to check a GIT revision list: $ ./scripts/checkpatch.pl master.. total: 0 errors, 0 warnings, 297 lines checked b886d352a2bf58f0996471fb3991a138373a2957 has no obvious style problems and is ready for submission. total: 0 errors, 0 warnings, 182 lines checked 2a731f9a9ce145e0e0df6d42dd2a3ce4dfc543fa has no obvious style problems and is ready for submission. total: 0 errors, 0 warnings, 102 lines checked 11844169bcc0c8ed4449eb3744a69877ed329dd7 has no obvious style problems and is ready for submission. If a genuine patch filename contains the characters '..' it is possible to force interpretation of the arg as a patch $ ./scripts/checkpatch.pl --patch master.. will force it to load a patch file called "master..", or equivalently $ ./scripts/checkpatch.pl --no-branch master.. will simply turn off guessing of GIT revision lists. Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Message-Id: <20170913091000.9005-1-berrange@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-09-13 11:10:00 +02:00
my $HASH;
open($HASH, "-|", "git", "log", "--reverse", "--no-merges", "--format=%H %s", $ARGV[0]) ||
die "$P: git log --reverse --no-merges --format='%H %s' $ARGV[0] failed - $!\n";
for my $line (<$HASH>) {
$line =~ /^([0-9a-fA-F]{40,40}) (.*)$/;
next if (!defined($1) || !defined($2));
my $sha1 = $1;
my $subject = $2;
push(@patches, $sha1);
$git_commits{$sha1} = $subject;
}
scripts: let checkpatch.pl process an entire GIT branch Currently before submitting a series, devs should run checkpatch.pl across each patch to be submitted. This can be automated using a command such as: git rebase -i master -x 'git show | ./scripts/checkpatch.pl -' This is rather long winded to type, so this patch introduces a way to tell checkpatch.pl to validate a series of GIT revisions. There are now three modes it can operate in 1) check a patch 2) check a source file, or 3) check a git branch. If no flags are given, the mode is determined by checking the args passed to the command. If the args contain a literal ".." it is treated as a GIT revision list. If the args end in ".patch" or equal "-" it is treated as a patch file. Otherwise it is treated as a source file. This automatic guessing can be overridden using --[no-]patch --[no-]file or --[no-]branch For example to check a GIT revision list: $ ./scripts/checkpatch.pl master.. total: 0 errors, 0 warnings, 297 lines checked b886d352a2bf58f0996471fb3991a138373a2957 has no obvious style problems and is ready for submission. total: 0 errors, 0 warnings, 182 lines checked 2a731f9a9ce145e0e0df6d42dd2a3ce4dfc543fa has no obvious style problems and is ready for submission. total: 0 errors, 0 warnings, 102 lines checked 11844169bcc0c8ed4449eb3744a69877ed329dd7 has no obvious style problems and is ready for submission. If a genuine patch filename contains the characters '..' it is possible to force interpretation of the arg as a patch $ ./scripts/checkpatch.pl --patch master.. will force it to load a patch file called "master..", or equivalently $ ./scripts/checkpatch.pl --no-branch master.. will simply turn off guessing of GIT revision lists. Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Message-Id: <20170913091000.9005-1-berrange@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-09-13 11:10:00 +02:00
close $HASH;
die "$P: no revisions returned for revlist '$chk_branch'\n"
unless @patches;
my $i = 1;
my $num_patches = @patches;
scripts: let checkpatch.pl process an entire GIT branch Currently before submitting a series, devs should run checkpatch.pl across each patch to be submitted. This can be automated using a command such as: git rebase -i master -x 'git show | ./scripts/checkpatch.pl -' This is rather long winded to type, so this patch introduces a way to tell checkpatch.pl to validate a series of GIT revisions. There are now three modes it can operate in 1) check a patch 2) check a source file, or 3) check a git branch. If no flags are given, the mode is determined by checking the args passed to the command. If the args contain a literal ".." it is treated as a GIT revision list. If the args end in ".patch" or equal "-" it is treated as a patch file. Otherwise it is treated as a source file. This automatic guessing can be overridden using --[no-]patch --[no-]file or --[no-]branch For example to check a GIT revision list: $ ./scripts/checkpatch.pl master.. total: 0 errors, 0 warnings, 297 lines checked b886d352a2bf58f0996471fb3991a138373a2957 has no obvious style problems and is ready for submission. total: 0 errors, 0 warnings, 182 lines checked 2a731f9a9ce145e0e0df6d42dd2a3ce4dfc543fa has no obvious style problems and is ready for submission. total: 0 errors, 0 warnings, 102 lines checked 11844169bcc0c8ed4449eb3744a69877ed329dd7 has no obvious style problems and is ready for submission. If a genuine patch filename contains the characters '..' it is possible to force interpretation of the arg as a patch $ ./scripts/checkpatch.pl --patch master.. will force it to load a patch file called "master..", or equivalently $ ./scripts/checkpatch.pl --no-branch master.. will simply turn off guessing of GIT revision lists. Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Message-Id: <20170913091000.9005-1-berrange@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-09-13 11:10:00 +02:00
for my $hash (@patches) {
my $FILE;
open($FILE, '-|', "git", "show", $hash) ||
die "$P: git show $hash - $!\n";
while (<$FILE>) {
chomp;
push(@rawlines, $_);
}
close($FILE);
$vname = substr($hash, 0, 12) . ' (' . $git_commits{$hash} . ')';
if ($num_patches > 1 && $quiet == 0) {
my $prefix = "$i/$num_patches";
$prefix = BLUE . BOLD . $prefix . RESET if $color;
print "$prefix Checking commit $vname\n";
$vname = "Patch $i/$num_patches";
} else {
$vname = "Commit " . $vname;
}
scripts: let checkpatch.pl process an entire GIT branch Currently before submitting a series, devs should run checkpatch.pl across each patch to be submitted. This can be automated using a command such as: git rebase -i master -x 'git show | ./scripts/checkpatch.pl -' This is rather long winded to type, so this patch introduces a way to tell checkpatch.pl to validate a series of GIT revisions. There are now three modes it can operate in 1) check a patch 2) check a source file, or 3) check a git branch. If no flags are given, the mode is determined by checking the args passed to the command. If the args contain a literal ".." it is treated as a GIT revision list. If the args end in ".patch" or equal "-" it is treated as a patch file. Otherwise it is treated as a source file. This automatic guessing can be overridden using --[no-]patch --[no-]file or --[no-]branch For example to check a GIT revision list: $ ./scripts/checkpatch.pl master.. total: 0 errors, 0 warnings, 297 lines checked b886d352a2bf58f0996471fb3991a138373a2957 has no obvious style problems and is ready for submission. total: 0 errors, 0 warnings, 182 lines checked 2a731f9a9ce145e0e0df6d42dd2a3ce4dfc543fa has no obvious style problems and is ready for submission. total: 0 errors, 0 warnings, 102 lines checked 11844169bcc0c8ed4449eb3744a69877ed329dd7 has no obvious style problems and is ready for submission. If a genuine patch filename contains the characters '..' it is possible to force interpretation of the arg as a patch $ ./scripts/checkpatch.pl --patch master.. will force it to load a patch file called "master..", or equivalently $ ./scripts/checkpatch.pl --no-branch master.. will simply turn off guessing of GIT revision lists. Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Message-Id: <20170913091000.9005-1-berrange@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-09-13 11:10:00 +02:00
if (!process($hash)) {
$exit = 1;
print "\n" if ($num_patches > 1 && $quiet == 0);
scripts: let checkpatch.pl process an entire GIT branch Currently before submitting a series, devs should run checkpatch.pl across each patch to be submitted. This can be automated using a command such as: git rebase -i master -x 'git show | ./scripts/checkpatch.pl -' This is rather long winded to type, so this patch introduces a way to tell checkpatch.pl to validate a series of GIT revisions. There are now three modes it can operate in 1) check a patch 2) check a source file, or 3) check a git branch. If no flags are given, the mode is determined by checking the args passed to the command. If the args contain a literal ".." it is treated as a GIT revision list. If the args end in ".patch" or equal "-" it is treated as a patch file. Otherwise it is treated as a source file. This automatic guessing can be overridden using --[no-]patch --[no-]file or --[no-]branch For example to check a GIT revision list: $ ./scripts/checkpatch.pl master.. total: 0 errors, 0 warnings, 297 lines checked b886d352a2bf58f0996471fb3991a138373a2957 has no obvious style problems and is ready for submission. total: 0 errors, 0 warnings, 182 lines checked 2a731f9a9ce145e0e0df6d42dd2a3ce4dfc543fa has no obvious style problems and is ready for submission. total: 0 errors, 0 warnings, 102 lines checked 11844169bcc0c8ed4449eb3744a69877ed329dd7 has no obvious style problems and is ready for submission. If a genuine patch filename contains the characters '..' it is possible to force interpretation of the arg as a patch $ ./scripts/checkpatch.pl --patch master.. will force it to load a patch file called "master..", or equivalently $ ./scripts/checkpatch.pl --no-branch master.. will simply turn off guessing of GIT revision lists. Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Message-Id: <20170913091000.9005-1-berrange@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-09-13 11:10:00 +02:00
}
@rawlines = ();
@lines = ();
$i++;
scripts: let checkpatch.pl process an entire GIT branch Currently before submitting a series, devs should run checkpatch.pl across each patch to be submitted. This can be automated using a command such as: git rebase -i master -x 'git show | ./scripts/checkpatch.pl -' This is rather long winded to type, so this patch introduces a way to tell checkpatch.pl to validate a series of GIT revisions. There are now three modes it can operate in 1) check a patch 2) check a source file, or 3) check a git branch. If no flags are given, the mode is determined by checking the args passed to the command. If the args contain a literal ".." it is treated as a GIT revision list. If the args end in ".patch" or equal "-" it is treated as a patch file. Otherwise it is treated as a source file. This automatic guessing can be overridden using --[no-]patch --[no-]file or --[no-]branch For example to check a GIT revision list: $ ./scripts/checkpatch.pl master.. total: 0 errors, 0 warnings, 297 lines checked b886d352a2bf58f0996471fb3991a138373a2957 has no obvious style problems and is ready for submission. total: 0 errors, 0 warnings, 182 lines checked 2a731f9a9ce145e0e0df6d42dd2a3ce4dfc543fa has no obvious style problems and is ready for submission. total: 0 errors, 0 warnings, 102 lines checked 11844169bcc0c8ed4449eb3744a69877ed329dd7 has no obvious style problems and is ready for submission. If a genuine patch filename contains the characters '..' it is possible to force interpretation of the arg as a patch $ ./scripts/checkpatch.pl --patch master.. will force it to load a patch file called "master..", or equivalently $ ./scripts/checkpatch.pl --no-branch master.. will simply turn off guessing of GIT revision lists. Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Message-Id: <20170913091000.9005-1-berrange@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-09-13 11:10:00 +02:00
}
} else {
for my $filename (@ARGV) {
my $FILE;
if ($file) {
open($FILE, '-|', "diff -u /dev/null $filename") ||
die "$P: $filename: diff failed - $!\n";
} elsif ($filename eq '-') {
open($FILE, '<&STDIN');
} else {
open($FILE, '<', "$filename") ||
die "$P: $filename: open failed - $!\n";
}
if ($filename eq '-') {
$vname = 'Your patch';
} else {
$vname = $filename;
}
print "Checking $filename...\n" if @ARGV > 1 && $quiet == 0;
scripts: let checkpatch.pl process an entire GIT branch Currently before submitting a series, devs should run checkpatch.pl across each patch to be submitted. This can be automated using a command such as: git rebase -i master -x 'git show | ./scripts/checkpatch.pl -' This is rather long winded to type, so this patch introduces a way to tell checkpatch.pl to validate a series of GIT revisions. There are now three modes it can operate in 1) check a patch 2) check a source file, or 3) check a git branch. If no flags are given, the mode is determined by checking the args passed to the command. If the args contain a literal ".." it is treated as a GIT revision list. If the args end in ".patch" or equal "-" it is treated as a patch file. Otherwise it is treated as a source file. This automatic guessing can be overridden using --[no-]patch --[no-]file or --[no-]branch For example to check a GIT revision list: $ ./scripts/checkpatch.pl master.. total: 0 errors, 0 warnings, 297 lines checked b886d352a2bf58f0996471fb3991a138373a2957 has no obvious style problems and is ready for submission. total: 0 errors, 0 warnings, 182 lines checked 2a731f9a9ce145e0e0df6d42dd2a3ce4dfc543fa has no obvious style problems and is ready for submission. total: 0 errors, 0 warnings, 102 lines checked 11844169bcc0c8ed4449eb3744a69877ed329dd7 has no obvious style problems and is ready for submission. If a genuine patch filename contains the characters '..' it is possible to force interpretation of the arg as a patch $ ./scripts/checkpatch.pl --patch master.. will force it to load a patch file called "master..", or equivalently $ ./scripts/checkpatch.pl --no-branch master.. will simply turn off guessing of GIT revision lists. Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Message-Id: <20170913091000.9005-1-berrange@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-09-13 11:10:00 +02:00
while (<$FILE>) {
chomp;
push(@rawlines, $_);
}
close($FILE);
if (!process($filename)) {
$exit = 1;
}
@rawlines = ();
@lines = ();
}
}
exit($exit);
sub top_of_kernel_tree {
my ($root) = @_;
my @tree_check = (
"COPYING", "MAINTAINERS", "Makefile",
"README.rst", "docs", "VERSION",
"linux-user", "softmmu"
);
foreach my $check (@tree_check) {
if (! -e $root . '/' . $check) {
return 0;
}
}
return 1;
}
sub expand_tabs {
my ($str) = @_;
my $res = '';
my $n = 0;
for my $c (split(//, $str)) {
if ($c eq "\t") {
$res .= ' ';
$n++;
for (; ($n % 8) != 0; $n++) {
$res .= ' ';
}
next;
}
$res .= $c;
$n++;
}
return $res;
}
sub copy_spacing {
(my $res = shift) =~ tr/\t/ /c;
return $res;
}
sub line_stats {
my ($line) = @_;
# Drop the diff line leader and expand tabs
$line =~ s/^.//;
$line = expand_tabs($line);
# Pick the indent from the front of the line.
my ($white) = ($line =~ /^(\s*)/);
return (length($line), length($white));
}
my $sanitise_quote = '';
sub sanitise_line_reset {
my ($in_comment) = @_;
if ($in_comment) {
$sanitise_quote = '*/';
} else {
$sanitise_quote = '';
}
}
sub sanitise_line {
my ($line) = @_;
my $res = '';
my $l = '';
my $qlen = 0;
my $off = 0;
my $c;
# Always copy over the diff marker.
$res = substr($line, 0, 1);
for ($off = 1; $off < length($line); $off++) {
$c = substr($line, $off, 1);
# Comments we are wacking completely including the begin
# and end, all to $;.
if ($sanitise_quote eq '' && substr($line, $off, 2) eq '/*') {
$sanitise_quote = '*/';
substr($res, $off, 2, "$;$;");
$off++;
next;
}
if ($sanitise_quote eq '*/' && substr($line, $off, 2) eq '*/') {
$sanitise_quote = '';
substr($res, $off, 2, "$;$;");
$off++;
next;
}
if ($sanitise_quote eq '' && substr($line, $off, 2) eq '//') {
$sanitise_quote = '//';
substr($res, $off, 2, $sanitise_quote);
$off++;
next;
}
# A \ in a string means ignore the next character.
if (($sanitise_quote eq "'" || $sanitise_quote eq '"') &&
$c eq "\\") {
substr($res, $off, 2, 'XX');
$off++;
next;
}
# Regular quotes.
if ($c eq "'" || $c eq '"') {
if ($sanitise_quote eq '') {
$sanitise_quote = $c;
substr($res, $off, 1, $c);
next;
} elsif ($sanitise_quote eq $c) {
$sanitise_quote = '';
}
}
#print "c<$c> SQ<$sanitise_quote>\n";
if ($off != 0 && $sanitise_quote eq '*/' && $c ne "\t") {
substr($res, $off, 1, $;);
} elsif ($off != 0 && $sanitise_quote eq '//' && $c ne "\t") {
substr($res, $off, 1, $;);
} elsif ($off != 0 && $sanitise_quote && $c ne "\t") {
substr($res, $off, 1, 'X');
} else {
substr($res, $off, 1, $c);
}
}
if ($sanitise_quote eq '//') {
$sanitise_quote = '';
}
# The pathname on a #include may be surrounded by '<' and '>'.
if ($res =~ /^.\s*\#\s*include\s+\<(.*)\>/) {
my $clean = 'X' x length($1);
$res =~ s@\<.*\>@<$clean>@;
# The whole of a #error is a string.
} elsif ($res =~ /^.\s*\#\s*(?:error|warning)\s+(.*)\b/) {
my $clean = 'X' x length($1);
$res =~ s@(\#\s*(?:error|warning)\s+).*@$1$clean@;
}
return $res;
}
sub ctx_statement_block {
my ($linenr, $remain, $off) = @_;
my $line = $linenr - 1;
my $blk = '';
my $soff = $off;
my $coff = $off - 1;
my $coff_set = 0;
my $loff = 0;
my $type = '';
my $level = 0;
my @stack = ();
my $p;
my $c;
my $len = 0;
my $remainder;
while (1) {
@stack = (['', 0]) if ($#stack == -1);
#warn "CSB: blk<$blk> remain<$remain>\n";
# If we are about to drop off the end, pull in more
# context.
if ($off >= $len) {
for (; $remain > 0; $line++) {
last if (!defined $lines[$line]);
next if ($lines[$line] =~ /^-/);
$remain--;
$loff = $len;
$blk .= $lines[$line] . "\n";
$len = length($blk);
$line++;
last;
}
# Bail if there is no further context.
#warn "CSB: blk<$blk> off<$off> len<$len>\n";
if ($off >= $len) {
last;
}
}
$p = $c;
$c = substr($blk, $off, 1);
$remainder = substr($blk, $off);
#warn "CSB: c<$c> type<$type> level<$level> remainder<$remainder> coff_set<$coff_set>\n";
# Handle nested #if/#else.
if ($remainder =~ /^#\s*(?:ifndef|ifdef|if)\s/) {
push(@stack, [ $type, $level ]);
} elsif ($remainder =~ /^#\s*(?:else|elif)\b/) {
($type, $level) = @{$stack[$#stack - 1]};
} elsif ($remainder =~ /^#\s*endif\b/) {
($type, $level) = @{pop(@stack)};
}
# Statement ends at the ';' or a close '}' at the
# outermost level.
if ($level == 0 && $c eq ';') {
last;
}
# An else is really a conditional as long as its not else if
if ($level == 0 && $coff_set == 0 &&
(!defined($p) || $p =~ /(?:\s|\}|\+)/) &&
$remainder =~ /^(else)(?:\s|{)/ &&
$remainder !~ /^else\s+if\b/) {
$coff = $off + length($1) - 1;
$coff_set = 1;
#warn "CSB: mark coff<$coff> soff<$soff> 1<$1>\n";
#warn "[" . substr($blk, $soff, $coff - $soff + 1) . "]\n";
}
if (($type eq '' || $type eq '(') && $c eq '(') {
$level++;
$type = '(';
}
if ($type eq '(' && $c eq ')') {
$level--;
$type = ($level != 0)? '(' : '';
if ($level == 0 && $coff < $soff) {
$coff = $off;
$coff_set = 1;
#warn "CSB: mark coff<$coff>\n";
}
}
if (($type eq '' || $type eq '{') && $c eq '{') {
$level++;
$type = '{';
}
if ($type eq '{' && $c eq '}') {
$level--;
$type = ($level != 0)? '{' : '';
if ($level == 0) {
if (substr($blk, $off + 1, 1) eq ';') {
$off++;
}
last;
}
}
$off++;
}
# We are truly at the end, so shuffle to the next line.
if ($off == $len) {
$loff = $len + 1;
$line++;
$remain--;
}
my $statement = substr($blk, $soff, $off - $soff + 1);
my $condition = substr($blk, $soff, $coff - $soff + 1);
#warn "STATEMENT<$statement>\n";
#warn "CONDITION<$condition>\n";
#print "coff<$coff> soff<$off> loff<$loff>\n";
return ($statement, $condition,
$line, $remain + 1, $off - $loff + 1, $level);
}
sub statement_lines {
my ($stmt) = @_;
# Strip the diff line prefixes and rip blank lines at start and end.
$stmt =~ s/(^|\n)./$1/g;
$stmt =~ s/^\s*//;
$stmt =~ s/\s*$//;
my @stmt_lines = ($stmt =~ /\n/g);
return $#stmt_lines + 2;
}
sub statement_rawlines {
my ($stmt) = @_;
my @stmt_lines = ($stmt =~ /\n/g);
return $#stmt_lines + 2;
}
sub statement_block_size {
my ($stmt) = @_;
$stmt =~ s/(^|\n)./$1/g;
$stmt =~ s/^\s*\{//;
$stmt =~ s/}\s*$//;
$stmt =~ s/^\s*//;
$stmt =~ s/\s*$//;
my @stmt_lines = ($stmt =~ /\n/g);
my @stmt_statements = ($stmt =~ /;/g);
my $stmt_lines = $#stmt_lines + 2;
my $stmt_statements = $#stmt_statements + 1;
if ($stmt_lines > $stmt_statements) {
return $stmt_lines;
} else {
return $stmt_statements;
}
}
sub ctx_statement_full {
my ($linenr, $remain, $off) = @_;
my ($statement, $condition, $level);
my (@chunks);
# Grab the first conditional/block pair.
($statement, $condition, $linenr, $remain, $off, $level) =
ctx_statement_block($linenr, $remain, $off);
#print "F: c<$condition> s<$statement> remain<$remain>\n";
push(@chunks, [ $condition, $statement ]);
if (!($remain > 0 && $condition =~ /^\s*(?:\n[+-])?\s*(?:if|else|do)\b/s)) {
return ($level, $linenr, @chunks);
}
# Pull in the following conditional/block pairs and see if they
# could continue the statement.
for (;;) {
($statement, $condition, $linenr, $remain, $off, $level) =
ctx_statement_block($linenr, $remain, $off);
#print "C: c<$condition> s<$statement> remain<$remain>\n";
last if (!($remain > 0 && $condition =~ /^(?:\s*\n[+-])*\s*(?:else|do)\b/s));
#print "C: push\n";
push(@chunks, [ $condition, $statement ]);
}
return ($level, $linenr, @chunks);
}
sub ctx_block_get {
my ($linenr, $remain, $outer, $open, $close, $off) = @_;
my $line;
my $start = $linenr - 1;
my $blk = '';
my @o;
my @c;
my @res = ();
my $level = 0;
my @stack = ($level);
for ($line = $start; $remain > 0; $line++) {
next if ($rawlines[$line] =~ /^-/);
$remain--;
$blk .= $rawlines[$line];
# Handle nested #if/#else.
if ($lines[$line] =~ /^.\s*#\s*(?:ifndef|ifdef|if)\s/) {
push(@stack, $level);
} elsif ($lines[$line] =~ /^.\s*#\s*(?:else|elif)\b/) {
$level = $stack[$#stack - 1];
} elsif ($lines[$line] =~ /^.\s*#\s*endif\b/) {
$level = pop(@stack);
}
foreach my $c (split(//, $lines[$line])) {
##print "C<$c>L<$level><$open$close>O<$off>\n";
if ($off > 0) {
$off--;
next;
}
if ($c eq $close && $level > 0) {
$level--;
last if ($level == 0);
} elsif ($c eq $open) {
$level++;
}
}
if (!$outer || $level <= 1) {
push(@res, $rawlines[$line]);
}
last if ($level == 0);
}
return ($level, @res);
}
sub ctx_block_outer {
my ($linenr, $remain) = @_;
my ($level, @r) = ctx_block_get($linenr, $remain, 1, '{', '}', 0);
return @r;
}
sub ctx_block {
my ($linenr, $remain) = @_;
my ($level, @r) = ctx_block_get($linenr, $remain, 0, '{', '}', 0);
return @r;
}
sub ctx_statement {
my ($linenr, $remain, $off) = @_;
my ($level, @r) = ctx_block_get($linenr, $remain, 0, '(', ')', $off);
return @r;
}
sub ctx_block_level {
my ($linenr, $remain) = @_;
return ctx_block_get($linenr, $remain, 0, '{', '}', 0);
}
sub ctx_statement_level {
my ($linenr, $remain, $off) = @_;
return ctx_block_get($linenr, $remain, 0, '(', ')', $off);
}
sub ctx_locate_comment {
my ($first_line, $end_line) = @_;
# Catch a comment on the end of the line itself.
my ($current_comment) = ($rawlines[$end_line - 1] =~ m@.*(/\*.*\*/)\s*(?:\\\s*)?$@);
return $current_comment if (defined $current_comment);
# Look through the context and try and figure out if there is a
# comment.
my $in_comment = 0;
$current_comment = '';
for (my $linenr = $first_line; $linenr < $end_line; $linenr++) {
my $line = $rawlines[$linenr - 1];
#warn " $line\n";
if ($linenr == $first_line and $line =~ m@^.\s*\*@) {
$in_comment = 1;
}
if ($line =~ m@/\*@) {
$in_comment = 1;
}
if (!$in_comment && $current_comment ne '') {
$current_comment = '';
}
$current_comment .= $line . "\n" if ($in_comment);
if ($line =~ m@\*/@) {
$in_comment = 0;
}
}
chomp($current_comment);
return($current_comment);
}
sub ctx_has_comment {
my ($first_line, $end_line) = @_;
my $cmt = ctx_locate_comment($first_line, $end_line);
##print "LINE: $rawlines[$end_line - 1 ]\n";
##print "CMMT: $cmt\n";
return ($cmt ne '');
}
sub raw_line {
my ($linenr, $cnt) = @_;
my $offset = $linenr - 1;
$cnt++;
my $line;
while ($cnt) {
$line = $rawlines[$offset++];
next if (defined($line) && $line =~ /^-/);
$cnt--;
}
return $line;
}
sub cat_vet {
my ($vet) = @_;
my ($res, $coded);
$res = '';
while ($vet =~ /([^[:cntrl:]]*)([[:cntrl:]]|$)/g) {
$res .= $1;
if ($2 ne '') {
$coded = sprintf("^%c", unpack('C', $2) + 64);
$res .= $coded;
}
}
$res =~ s/$/\$/;
return $res;
}
my $av_preprocessor = 0;
my $av_pending;
my @av_paren_type;
my $av_pend_colon;
sub annotate_reset {
$av_preprocessor = 0;
$av_pending = '_';
@av_paren_type = ('E');
$av_pend_colon = 'O';
}
sub annotate_values {
my ($stream, $type) = @_;
my $res;
my $var = '_' x length($stream);
my $cur = $stream;
print "$stream\n" if ($dbg_values > 1);
while (length($cur)) {
@av_paren_type = ('E') if ($#av_paren_type < 0);
print " <" . join('', @av_paren_type) .
"> <$type> <$av_pending>" if ($dbg_values > 1);
if ($cur =~ /^(\s+)/o) {
print "WS($1)\n" if ($dbg_values > 1);
if ($1 =~ /\n/ && $av_preprocessor) {
$type = pop(@av_paren_type);
$av_preprocessor = 0;
}
} elsif ($cur =~ /^(\(\s*$Type\s*)\)/ && $av_pending eq '_') {
print "CAST($1)\n" if ($dbg_values > 1);
push(@av_paren_type, $type);
$type = 'C';
} elsif ($cur =~ /^($Type)\s*(?:$Ident|,|\)|\(|\s*$)/) {
print "DECLARE($1)\n" if ($dbg_values > 1);
$type = 'T';
} elsif ($cur =~ /^($Modifier)\s*/) {
print "MODIFIER($1)\n" if ($dbg_values > 1);
$type = 'T';
} elsif ($cur =~ /^(\#\s*define\s*$Ident)(\(?)/o) {
print "DEFINE($1,$2)\n" if ($dbg_values > 1);
$av_preprocessor = 1;
push(@av_paren_type, $type);
if ($2 ne '') {
$av_pending = 'N';
}
$type = 'E';
} elsif ($cur =~ /^(\#\s*(?:undef\s*$Ident|include\b))/o) {
print "UNDEF($1)\n" if ($dbg_values > 1);
$av_preprocessor = 1;
push(@av_paren_type, $type);
} elsif ($cur =~ /^(\#\s*(?:ifdef|ifndef|if))/o) {
print "PRE_START($1)\n" if ($dbg_values > 1);
$av_preprocessor = 1;
push(@av_paren_type, $type);
push(@av_paren_type, $type);
$type = 'E';
} elsif ($cur =~ /^(\#\s*(?:else|elif))/o) {
print "PRE_RESTART($1)\n" if ($dbg_values > 1);
$av_preprocessor = 1;
push(@av_paren_type, $av_paren_type[$#av_paren_type]);
$type = 'E';
} elsif ($cur =~ /^(\#\s*(?:endif))/o) {
print "PRE_END($1)\n" if ($dbg_values > 1);
$av_preprocessor = 1;
# Assume all arms of the conditional end as this
# one does, and continue as if the #endif was not here.
pop(@av_paren_type);
push(@av_paren_type, $type);
$type = 'E';
} elsif ($cur =~ /^(\\\n)/o) {
print "PRECONT($1)\n" if ($dbg_values > 1);
} elsif ($cur =~ /^(__attribute__)\s*\(?/o) {
print "ATTR($1)\n" if ($dbg_values > 1);
$av_pending = $type;
$type = 'N';
} elsif ($cur =~ /^(sizeof)\s*(\()?/o) {
print "SIZEOF($1)\n" if ($dbg_values > 1);
if (defined $2) {
$av_pending = 'V';
}
$type = 'N';
} elsif ($cur =~ /^(if|while|for)\b/o) {
print "COND($1)\n" if ($dbg_values > 1);
$av_pending = 'E';
$type = 'N';
} elsif ($cur =~/^(case)/o) {
print "CASE($1)\n" if ($dbg_values > 1);
$av_pend_colon = 'C';
$type = 'N';
} elsif ($cur =~/^(return|else|goto|typeof|__typeof__)\b/o) {
print "KEYWORD($1)\n" if ($dbg_values > 1);
$type = 'N';
} elsif ($cur =~ /^(\()/o) {
print "PAREN('$1')\n" if ($dbg_values > 1);
push(@av_paren_type, $av_pending);
$av_pending = '_';
$type = 'N';
} elsif ($cur =~ /^(\))/o) {
my $new_type = pop(@av_paren_type);
if ($new_type ne '_') {
$type = $new_type;
print "PAREN('$1') -> $type\n"
if ($dbg_values > 1);
} else {
print "PAREN('$1')\n" if ($dbg_values > 1);
}
} elsif ($cur =~ /^($Ident)\s*\(/o) {
print "FUNC($1)\n" if ($dbg_values > 1);
$type = 'V';
$av_pending = 'V';
} elsif ($cur =~ /^($Ident\s*):(?:\s*\d+\s*(,|=|;))?/) {
if (defined $2 && $type eq 'C' || $type eq 'T') {
$av_pend_colon = 'B';
} elsif ($type eq 'E') {
$av_pend_colon = 'L';
}
print "IDENT_COLON($1,$type>$av_pend_colon)\n" if ($dbg_values > 1);
$type = 'V';
} elsif ($cur =~ /^($Ident|$Constant)/o) {
print "IDENT($1)\n" if ($dbg_values > 1);
$type = 'V';
} elsif ($cur =~ /^($Assignment)/o) {
print "ASSIGN($1)\n" if ($dbg_values > 1);
$type = 'N';
} elsif ($cur =~/^(;|{|})/) {
print "END($1)\n" if ($dbg_values > 1);
$type = 'E';
$av_pend_colon = 'O';
} elsif ($cur =~/^(,)/) {
print "COMMA($1)\n" if ($dbg_values > 1);
$type = 'C';
} elsif ($cur =~ /^(\?)/o) {
print "QUESTION($1)\n" if ($dbg_values > 1);
$type = 'N';
} elsif ($cur =~ /^(:)/o) {
print "COLON($1,$av_pend_colon)\n" if ($dbg_values > 1);
substr($var, length($res), 1, $av_pend_colon);
if ($av_pend_colon eq 'C' || $av_pend_colon eq 'L') {
$type = 'E';
} else {
$type = 'N';
}
$av_pend_colon = 'O';
} elsif ($cur =~ /^(\[)/o) {
print "CLOSE($1)\n" if ($dbg_values > 1);
$type = 'N';
} elsif ($cur =~ /^(-(?![->])|\+(?!\+)|\*|\&\&|\&)/o) {
my $variant;
print "OPV($1)\n" if ($dbg_values > 1);
if ($type eq 'V') {
$variant = 'B';
} else {
$variant = 'U';
}
substr($var, length($res), 1, $variant);
$type = 'N';
} elsif ($cur =~ /^($Operators)/o) {
print "OP($1)\n" if ($dbg_values > 1);
if ($1 ne '++' && $1 ne '--') {
$type = 'N';
}
} elsif ($cur =~ /(^.)/o) {
print "C($1)\n" if ($dbg_values > 1);
}
if (defined $1) {
$cur = substr($cur, length($1));
$res .= $type x length($1);
}
}
return ($res, $var);
}
sub possible {
my ($possible, $line) = @_;
my $notPermitted = qr{(?:
^(?:
$Modifier|
$Storage|
$Type|
DEFINE_\S+
)$|
^(?:
goto|
return|
case|
else|
asm|__asm__|
do
)(?:\s|$)|
^(?:typedef|struct|enum)\b|
^\#
)}x;
warn "CHECK<$possible> ($line)\n" if ($dbg_possible > 2);
if ($possible !~ $notPermitted) {
# Check for modifiers.
$possible =~ s/\s*$Storage\s*//g;
$possible =~ s/\s*$Sparse\s*//g;
if ($possible =~ /^\s*$/) {
} elsif ($possible =~ /\s/) {
$possible =~ s/\s*(?:$Type|\#\#)\s*//g;
for my $modifier (split(' ', $possible)) {
if ($modifier !~ $notPermitted) {
warn "MODIFIER: $modifier ($possible) ($line)\n" if ($dbg_possible);
push(@modifierList, $modifier);
}
}
} else {
warn "POSSIBLE: $possible ($line)\n" if ($dbg_possible);
push(@typeList, $possible);
}
build_types();
} else {
warn "NOTPOSS: $possible ($line)\n" if ($dbg_possible > 1);
}
}
my $prefix = '';
sub report {
my ($level, $msg) = @_;
if (defined $tst_only && $msg !~ /\Q$tst_only\E/) {
return 0;
}
my $output = '';
$output .= BOLD if $color;
$output .= $prefix;
$output .= RED if $color && $level eq 'ERROR';
$output .= MAGENTA if $color && $level eq 'WARNING';
$output .= $level . ':';
$output .= RESET if $color;
$output .= ' ' . $msg . "\n";
$output = (split('\n', $output))[0] . "\n" if ($terse);
push(our @report, $output);
return 1;
}
sub report_dump {
our @report;
}
sub ERROR {
if (report("ERROR", $_[0])) {
our $clean = 0;
our $cnt_error++;
}
}
sub WARN {
if (report("WARNING", $_[0])) {
our $clean = 0;
our $cnt_warn++;
}
}
# According to tests/qtest/bios-tables-test.c: do not
# change expected file in the same commit with adding test
sub checkfilename {
my ($name, $acpi_testexpected, $acpi_nontestexpected) = @_;
# Note: shell script that rebuilds the expected files is in the same
# directory as files themselves.
# Note: allowed diff list can be changed both when changing expected
# files and when changing tests.
if ($name =~ m#^tests/data/acpi/# and not $name =~ m#^\.sh$#) {
$$acpi_testexpected = $name;
} elsif ($name !~ m#^tests/qtest/bios-tables-test-allowed-diff.h$#) {
$$acpi_nontestexpected = $name;
}
if (defined $$acpi_testexpected and defined $$acpi_nontestexpected) {
ERROR("Do not add expected files together with tests, " .
"follow instructions in " .
"tests/qtest/bios-tables-test.c: both " .
$$acpi_testexpected . " and " .
$$acpi_nontestexpected . " found\n");
}
}
sub process {
my $filename = shift;
my $linenr=0;
my $prevline="";
my $prevrawline="";
my $stashline="";
my $stashrawline="";
my $length;
my $indent;
my $previndent=0;
my $stashindent=0;
our $clean = 1;
my $signoff = 0;
my $is_patch = 0;
my $in_header_lines = $file ? 0 : 1;
my $in_commit_log = 0; #Scanning lines before patch
my $reported_maintainer_file = 0;
my $non_utf8_charset = 0;
our @report = ();
our $cnt_lines = 0;
our $cnt_error = 0;
our $cnt_warn = 0;
our $cnt_chk = 0;
# Trace the real file/line as we go.
my $realfile = '';
my $realline = 0;
my $realcnt = 0;
my $here = '';
my $in_comment = 0;
my $comment_edge = 0;
my $first_line = 0;
my $p1_prefix = '';
my $prev_values = 'E';
# suppression flags
my %suppress_ifbraces;
my %suppress_whiletrailers;
my %suppress_export;
my $acpi_testexpected;
my $acpi_nontestexpected;
# Pre-scan the patch sanitizing the lines.
sanitise_line_reset();
my $line;
foreach my $rawline (@rawlines) {
$linenr++;
$line = $rawline;
if ($rawline=~/^\@\@ -\d+(?:,\d+)? \+(\d+)(,(\d+))? \@\@/) {
$realline=$1-1;
if (defined $2) {
$realcnt=$3+1;
} else {
$realcnt=1+1;
}
$in_comment = 0;
# Guestimate if this is a continuing comment. Run
# the context looking for a comment "edge". If this
# edge is a close comment then we must be in a comment
# at context start.
my $edge;
my $cnt = $realcnt;
for (my $ln = $linenr + 1; $cnt > 0; $ln++) {
next if (defined $rawlines[$ln - 1] &&
$rawlines[$ln - 1] =~ /^-/);
$cnt--;
#print "RAW<$rawlines[$ln - 1]>\n";
last if (!defined $rawlines[$ln - 1]);
if ($rawlines[$ln - 1] =~ m@(/\*|\*/)@ &&
$rawlines[$ln - 1] !~ m@"[^"]*(?:/\*|\*/)[^"]*"@) {
($edge) = $1;
last;
}
}
if (defined $edge && $edge eq '*/') {
$in_comment = 1;
}
# Guestimate if this is a continuing comment. If this
# is the start of a diff block and this line starts
# ' *' then it is very likely a comment.
if (!defined $edge &&
$rawlines[$linenr] =~ m@^.\s*(?:\*\*+| \*)(?:\s|$)@)
{
$in_comment = 1;
}
##print "COMMENT:$in_comment edge<$edge> $rawline\n";
sanitise_line_reset($in_comment);
} elsif ($realcnt && $rawline =~ /^(?:\+| |$)/) {
# Standardise the strings and chars within the input to
# simplify matching -- only bother with positive lines.
$line = sanitise_line($rawline);
}
push(@lines, $line);
if ($realcnt > 1) {
$realcnt-- if ($line =~ /^(?:\+| |$)/);
} else {
$realcnt = 0;
}
#print "==>$rawline\n";
#print "-->$line\n";
}
$prefix = '';
$realcnt = 0;
$linenr = 0;
foreach my $line (@lines) {
$linenr++;
my $rawline = $rawlines[$linenr - 1];
#extract the line range in the file after the patch is applied
if ($line=~/^\@\@ -\d+(?:,\d+)? \+(\d+)(,(\d+))? \@\@/) {
$is_patch = 1;
$first_line = $linenr + 1;
$realline=$1-1;
if (defined $2) {
$realcnt=$3+1;
} else {
$realcnt=1+1;
}
annotate_reset();
$prev_values = 'E';
%suppress_ifbraces = ();
%suppress_whiletrailers = ();
%suppress_export = ();
next;
# track the line number as we move through the hunk, note that
# new versions of GNU diff omit the leading space on completely
# blank context lines so we need to count that too.
} elsif ($line =~ /^( |\+|$)/) {
$realline++;
$realcnt-- if ($realcnt != 0);
# Measure the line length and indent.
($length, $indent) = line_stats($rawline);
# Track the previous line.
($prevline, $stashline) = ($stashline, $line);
($previndent, $stashindent) = ($stashindent, $indent);
($prevrawline, $stashrawline) = ($stashrawline, $rawline);
#warn "line<$line>\n";
} elsif ($realcnt == 1) {
$realcnt--;
}
my $hunk_line = ($realcnt != 0);
#make up the handle for any error we report on this line
$prefix = "$filename:$realline: " if ($emacs && $file);
$prefix = "$filename:$linenr: " if ($emacs && !$file);
$here = "#$linenr: " if (!$file);
$here = "#$realline: " if ($file);
# extract the filename as it passes
if ($line =~ /^diff --git.*?(\S+)$/) {
$realfile = $1;
$realfile =~ s@^([^/]*)/@@ if (!$file);
checkfilename($realfile, \$acpi_testexpected, \$acpi_nontestexpected);
} elsif ($line =~ /^\+\+\+\s+(\S+)/) {
$realfile = $1;
$realfile =~ s@^([^/]*)/@@ if (!$file);
checkfilename($realfile, \$acpi_testexpected, \$acpi_nontestexpected);
$p1_prefix = $1;
if (!$file && $tree && $p1_prefix ne '' &&
-e "$root/$p1_prefix") {
WARN("patch prefix '$p1_prefix' exists, appears to be a -p0 patch\n");
}
next;
}
$here .= "FILE: $realfile:$realline:" if ($realcnt != 0);
my $hereline = "$here\n$rawline\n";
my $herecurr = "$here\n$rawline\n";
my $hereprev = "$here\n$prevrawline\n$rawline\n";
$cnt_lines++ if ($realcnt != 0);
# Check for incorrect file permissions
if ($line =~ /^new (file )?mode.*[7531]\d{0,2}$/) {
my $permhere = $here . "FILE: $realfile\n";
if ($realfile =~ /(\bMakefile(?:\.objs)?|\.c|\.cc|\.cpp|\.h|\.mak|\.[sS])$/) {
ERROR("do not set execute permissions for source files\n" . $permhere);
}
}
# Only allow Python 3 interpreter
if ($realline == 1 &&
$line =~ /^\+#!\ *\/usr\/bin\/(?:env )?python$/) {
ERROR("please use python3 interpreter\n" . $herecurr);
}
# Accept git diff extended headers as valid patches
if ($line =~ /^(?:rename|copy) (?:from|to) [\w\/\.\-]+\s*$/) {
$is_patch = 1;
}
if ($line =~ /^Author: .*via Qemu-devel.*<qemu-devel\@nongnu.org>/) {
ERROR("Author email address is mangled by the mailing list\n" . $herecurr);
}
#check the patch for a signoff:
if ($line =~ /^\s*signed-off-by:/i) {
# This is a signoff, if ugly, so do not double report.
$signoff++;
$in_commit_log = 0;
if (!($line =~ /^\s*Signed-off-by:/)) {
ERROR("The correct form is \"Signed-off-by\"\n" .
$herecurr);
}
if ($line =~ /^\s*signed-off-by:\S/i) {
ERROR("space required after Signed-off-by:\n" .
$herecurr);
}
}
# Check if MAINTAINERS is being updated. If so, there's probably no need to
# emit the "does MAINTAINERS need updating?" message on file add/move/delete
if ($line =~ /^\s*MAINTAINERS\s*\|/) {
$reported_maintainer_file = 1;
}
# Check for added, moved or deleted files
if (!$reported_maintainer_file && !$in_commit_log &&
($line =~ /^(?:new|deleted) file mode\s*\d+\s*$/ ||
$line =~ /^rename (?:from|to) [\w\/\.\-]+\s*$/ ||
($line =~ /\{\s*([\w\/\.\-]*)\s*\=\>\s*([\w\/\.\-]*)\s*\}/ &&
(defined($1) || defined($2))))) {
$reported_maintainer_file = 1;
WARN("added, moved or deleted file(s), does MAINTAINERS need updating?\n" . $herecurr);
}
# Check for wrappage within a valid hunk of the file
if ($realcnt != 0 && $line !~ m{^(?:\+|-| |\\ No newline|$)}) {
ERROR("patch seems to be corrupt (line wrapped?)\n" .
$herecurr) if (!$emitted_corrupt++);
}
# UTF-8 regex found at http://www.w3.org/International/questions/qa-forms-utf-8.en.php
if (($realfile =~ /^$/ || $line =~ /^\+/) &&
$rawline !~ m/^$UTF8*$/) {
my ($utf8_prefix) = ($rawline =~ /^($UTF8*)/);
my $blank = copy_spacing($rawline);
my $ptr = substr($blank, 0, length($utf8_prefix)) . "^";
my $hereptr = "$hereline$ptr\n";
ERROR("Invalid UTF-8, patch and commit message should be encoded in UTF-8\n" . $hereptr);
}
if ($rawline =~ m/$UTF8_MOJIBAKE/) {
ERROR("Doubly-encoded UTF-8\n" . $herecurr);
}
# Check if it's the start of a commit log
# (not a header line and we haven't seen the patch filename)
if ($in_header_lines && $realfile =~ /^$/ &&
!($rawline =~ /^\s+\S/ ||
$rawline =~ /^(commit\b|from\b|[\w-]+:).*$/i)) {
$in_header_lines = 0;
$in_commit_log = 1;
}
# Check if there is UTF-8 in a commit log when a mail header has explicitly
# declined it, i.e defined some charset where it is missing.
if ($in_header_lines &&
$rawline =~ /^Content-Type:.+charset="(.+)".*$/ &&
$1 !~ /utf-8/i) {
$non_utf8_charset = 1;
}
if ($in_commit_log && $non_utf8_charset && $realfile =~ /^$/ &&
$rawline =~ /$NON_ASCII_UTF8/) {
WARN("8-bit UTF-8 used in possible commit log\n" . $herecurr);
}
# ignore non-hunk lines and lines being removed
next if (!$hunk_line || $line =~ /^-/);
# ignore files that are being periodically imported from Linux
next if ($realfile =~ /^(linux-headers|include\/standard-headers)\//);
#trailing whitespace
if ($line =~ /^\+.*\015/) {
my $herevet = "$here\n" . cat_vet($rawline) . "\n";
ERROR("DOS line endings\n" . $herevet);
} elsif ($realfile =~ /^docs\/.+\.txt/ ||
$realfile =~ /^docs\/.+\.md/) {
if ($rawline =~ /^\+\s+$/ && $rawline !~ /^\+ {4}$/) {
# TODO: properly check we're in a code block
# (surrounding text is 4-column aligned)
my $herevet = "$here\n" . cat_vet($rawline) . "\n";
ERROR("code blocks in documentation should have " .
"empty lines with exactly 4 columns of " .
"whitespace\n" . $herevet);
}
} elsif ($rawline =~ /^\+.*\S\s+$/ || $rawline =~ /^\+\s+$/) {
my $herevet = "$here\n" . cat_vet($rawline) . "\n";
ERROR("trailing whitespace\n" . $herevet);
$rpt_cleaners = 1;
}
# checks for trace-events files
if ($realfile =~ /trace-events$/ && $line =~ /^\+/) {
if ($rawline =~ /%[-+ 0]*#/) {
ERROR("Don't use '#' flag of printf format ('%#') in " .
"trace-events, use '0x' prefix instead\n" . $herecurr);
} else {
my $hex =
qr/%[-+ *.0-9]*([hljztL]|ll|hh)?(x|X|"\s*PRI[xX][^"]*"?)/;
# don't consider groups splitted by [.:/ ], like 2A.20:12ab
my $tmpline = $rawline;
$tmpline =~ s/($hex[.:\/ ])+$hex//g;
if ($tmpline =~ /(?<!0x)$hex/) {
ERROR("Hex numbers must be prefixed with '0x'\n" .
$herecurr);
}
}
}
# check we are in a valid source file if not then ignore this hunk
next if ($realfile !~ /$SrcFile/);
#90 column limit; exempt URLs, if no other words on line
if ($line =~ /^\+/ &&
!($line =~ /^\+\s*"[^"]*"\s*(?:\s*|,|\)\s*;)\s*$/) &&
!($rawline =~ /^[^[:alnum:]]*https?:\S*$/) &&
$length > 80)
{
if ($length > 90) {
ERROR("line over 90 characters\n" . $herecurr);
} else {
WARN("line over 80 characters\n" . $herecurr);
}
}
# check for spaces before a quoted newline
if ($rawline =~ /^.*\".*\s\\n/) {
ERROR("unnecessary whitespace before a quoted newline\n" . $herecurr);
}
# check for adding lines without a newline.
if ($line =~ /^\+/ && defined $lines[$linenr] && $lines[$linenr] =~ /^\\ No newline at end of file/) {
ERROR("adding a line without newline at end of file\n" . $herecurr);
}
# check for RCS/CVS revision markers
if ($rawline =~ /^\+.*\$(Revision|Log|Id)(?:\$|\b)/) {
ERROR("CVS style keyword markers, these will _not_ be updated\n". $herecurr);
}
# tabs are only allowed in assembly source code, and in
# some scripts we imported from other projects.
next if ($realfile =~ /\.(s|S)$/);
next if ($realfile =~ /(checkpatch|get_maintainer|texi2pod)\.pl$/);
if ($rawline =~ /^\+.*\t/) {
my $herevet = "$here\n" . cat_vet($rawline) . "\n";
ERROR("code indent should never use tabs\n" . $herevet);
$rpt_cleaners = 1;
}
# check we are in a valid C source file if not then ignore this hunk
next if ($realfile !~ /\.(h|c|cpp)$/);
# Block comment styles
# Block comments use /* on a line of its own
if ($rawline !~ m@^\+.*/\*.*\*/[ \t)}]*$@ && #inline /*...*/
checkpatch: Don't emit spurious warnings about block comments In checkpatch we attempt to check for and warn about block comments which start with /* or /** followed by a non-blank. Unfortunately a bug in the regex meant that we would incorrectly warn about comments starting with "/**" with no following text: git show 9813dc6ac3954d58ba16b3920556f106f97e1c67|./scripts/checkpatch.pl - WARNING: Block comments use a leading /* on a separate line #34: FILE: tests/libqtest.h:233: +/** The sequence "/\*\*?" was intended to match either "/*" or "/**", but Perl's semantics for '?' allow it to backtrack and try the "matches 0 chars" option if the "matches 1 char" choice leads to a failure of the rest of the regex to match. Switch to "/\*\*?+" which uses what perlre(1) calls the "possessive" quantifier form: this means that if it matches the "/**" string it will not later backtrack to matching just the "/*" prefix. The other end of the regex is also wrong: it is attempting to check for "/* or /** followed by something that isn't just whitespace", but [ \t]*.+[ \t]* will match on pure whitespace. This is less significant but means that a line with just a comment-starter followed by trailing whitespace will generate an incorrect warning about block comment style as well as the correct error about trailing whitespace which a different checkpatch test emits. Fixes: 8c06fbdf36bf4d ("scripts/checkpatch.pl: Enforce multiline comment syntax") Reported-by: Thomas Huth <thuth@redhat.com> Reported-by: Eric Blake <eblake@redhat.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Eric Blake <eblake@redhat.com> Message-id: 20190118165050.22270-1-peter.maydell@linaro.org
2019-01-29 12:46:05 +01:00
$rawline =~ m@^\+.*/\*\*?+[ \t]*[^ \t]@) { # /* or /** non-blank
WARN("Block comments use a leading /* on a separate line\n" . $herecurr);
}
# Block comments use * on subsequent lines
if ($prevline =~ /$;[ \t]*$/ && #ends in comment
$prevrawline =~ /^\+.*?\/\*/ && #starting /*
$prevrawline !~ /\*\/[ \t]*$/ && #no trailing */
$rawline =~ /^\+/ && #line is new
$rawline !~ /^\+[ \t]*\*/) { #no leading *
WARN("Block comments use * on subsequent lines\n" . $hereprev);
}
# Block comments use */ on trailing lines
if ($rawline !~ m@^\+[ \t]*\*/[ \t]*$@ && #trailing */
$rawline !~ m@^\+.*/\*.*\*/[ \t]*$@ && #inline /*...*/
$rawline !~ m@^\+.*\*{2,}/[ \t]*$@ && #trailing **/
$rawline =~ m@^\+[ \t]*.+\*\/[ \t]*$@) { #non blank */
WARN("Block comments use a trailing */ on a separate line\n" . $herecurr);
}
# Block comment * alignment
if ($prevline =~ /$;[ \t]*$/ && #ends in comment
$line =~ /^\+[ \t]*$;/ && #leading comment
$rawline =~ /^\+[ \t]*\*/ && #leading *
(($prevrawline =~ /^\+.*?\/\*/ && #leading /*
$prevrawline !~ /\*\/[ \t]*$/) || #no trailing */
$prevrawline =~ /^\+[ \t]*\*/)) { #leading *
my $oldindent;
$prevrawline =~ m@^\+([ \t]*/?)\*@;
if (defined($1)) {
$oldindent = expand_tabs($1);
} else {
$prevrawline =~ m@^\+(.*/?)\*@;
$oldindent = expand_tabs($1);
}
$rawline =~ m@^\+([ \t]*)\*@;
my $newindent = $1;
$newindent = expand_tabs($newindent);
if (length($oldindent) ne length($newindent)) {
WARN("Block comments should align the * on each line\n" . $hereprev);
}
}
# Check for potential 'bare' types
my ($stat, $cond, $line_nr_next, $remain_next, $off_next,
$realline_next);
if ($realcnt && $line =~ /.\s*\S/) {
($stat, $cond, $line_nr_next, $remain_next, $off_next) =
ctx_statement_block($linenr, $realcnt, 0);
$stat =~ s/\n./\n /g;
$cond =~ s/\n./\n /g;
# Find the real next line.
$realline_next = $line_nr_next;
if (defined $realline_next &&
(!defined $lines[$realline_next - 1] ||
substr($lines[$realline_next - 1], $off_next) =~ /^\s*$/)) {
$realline_next++;
}
my $s = $stat;
$s =~ s/{.*$//s;
# Ignore goto labels.
if ($s =~ /$Ident:\*$/s) {
# Ignore functions being called
} elsif ($s =~ /^.\s*$Ident\s*\(/s) {
} elsif ($s =~ /^.\s*else\b/s) {
# declarations always start with types
} elsif ($prev_values eq 'E' && $s =~ /^.\s*(?:$Storage\s+)?(?:$Inline\s+)?(?:const\s+)?((?:\s*$Ident)+?)\b(?:\s+$Sparse)?\s*\**\s*(?:$Ident|\(\*[^\)]*\))(?:\s*$Modifier)?\s*(?:;|=|,|\()/s) {
my $type = $1;
$type =~ s/\s+/ /g;
possible($type, "A:" . $s);
# definitions in global scope can only start with types
} elsif ($s =~ /^.(?:$Storage\s+)?(?:$Inline\s+)?(?:const\s+)?($Ident)\b\s*(?!:)/s) {
possible($1, "B:" . $s);
}
# any (foo ... *) is a pointer cast, and foo is a type
while ($s =~ /\(($Ident)(?:\s+$Sparse)*[\s\*]+\s*\)/sg) {
possible($1, "C:" . $s);
}
# Check for any sort of function declaration.
# int foo(something bar, other baz);
# void (*store_gdt)(x86_descr_ptr *);
if ($prev_values eq 'E' && $s =~ /^(.(?:typedef\s*)?(?:(?:$Storage|$Inline)\s*)*\s*$Type\s*(?:\b$Ident|\(\*\s*$Ident\))\s*)\(/s) {
my ($name_len) = length($1);
my $ctx = $s;
substr($ctx, 0, $name_len + 1, '');
$ctx =~ s/\)[^\)]*$//;
for my $arg (split(/\s*,\s*/, $ctx)) {
if ($arg =~ /^(?:const\s+)?($Ident)(?:\s+$Sparse)*\s*\**\s*(:?\b$Ident)?$/s || $arg =~ /^($Ident)$/s) {
possible($1, "D:" . $s);
}
}
}
}
#
# Checks which may be anchored in the context.
#
# Check for switch () and associated case and default
# statements should be at the same indent.
if ($line=~/\bswitch\s*\(.*\)/) {
my $err = '';
my $sep = '';
my @ctx = ctx_block_outer($linenr, $realcnt);
shift(@ctx);
for my $ctx (@ctx) {
my ($clen, $cindent) = line_stats($ctx);
if ($ctx =~ /^\+\s*(case\s+|default:)/ &&
$indent != $cindent) {
$err .= "$sep$ctx\n";
$sep = '';
} else {
$sep = "[...]\n";
}
}
if ($err ne '') {
ERROR("switch and case should be at the same indent\n$hereline$err");
}
}
# if/while/etc brace do not go on next line, unless defining a do while loop,
# or if that brace on the next line is for something else
if ($line =~ /(.*)\b((?:if|while|for|switch)\s*\(|do\b|else\b)/ && $line !~ /^.\s*\#/) {
my $pre_ctx = "$1$2";
my ($level, @ctx) = ctx_statement_level($linenr, $realcnt, 0);
my $ctx_cnt = $realcnt - $#ctx - 1;
my $ctx = join("\n", @ctx);
my $ctx_ln = $linenr;
my $ctx_skip = $realcnt;
while ($ctx_skip > $ctx_cnt || ($ctx_skip == $ctx_cnt &&
defined $lines[$ctx_ln - 1] &&
$lines[$ctx_ln - 1] =~ /^-/)) {
##print "SKIP<$ctx_skip> CNT<$ctx_cnt>\n";
$ctx_skip-- if (!defined $lines[$ctx_ln - 1] || $lines[$ctx_ln - 1] !~ /^-/);
$ctx_ln++;
}
#print "realcnt<$realcnt> ctx_cnt<$ctx_cnt>\n";
#print "pre<$pre_ctx>\nline<$line>\nctx<$ctx>\nnext<$lines[$ctx_ln - 1]>\n";
checkpatch: Brace handling on multi-line condition CODING_STYLE states the following about braces around blocks: > The opening brace is on the line that contains the control flow > statement that introduces the new block; [...] This is obviously impossible with multi-line conditions. Therefore, CODING_STYLE does not make any clear statement about where to put the opening brace after a multi-line condition. There is a reason to prefer to place the opening brace on an own line after such a condition while still placing it on the same line as the "control flow statement" if possible; that reason is that the last line of a multi-line condition is indented, in the case of "if", it is often indented by four spaces, just as much as the first statement in the block will be indented. This is hard to read as there is no clearly visible distinction between condition and block. Placing the opening brace on a separate line solves this issue. Also, there are cases where placing the opening brace on a separate line is the only viable option; if the previous line had nearly 80 characters and splitting it is not desirable, the opening brace is naturally placed on an own line. This patch fixes checkpatch.pl to not complain about braces on own lines if the condition introducing the block spanned more than one line, or if the previous line had 79 or 80 characters. Furthermore, the warning about not having braces around a block is fixed to mind braces not being on the last line of the condition. Signed-off-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-11-26 17:20:24 +01:00
# The length of the "previous line" is checked against 80 because it
# includes the + at the beginning of the line (if the actual line has
# 79 or 80 characters, it is no longer possible to add a space and an
# opening brace there)
if ($#ctx == 0 && $ctx !~ /{\s*/ &&
defined($lines[$ctx_ln - 1]) && $lines[$ctx_ln - 1] =~ /^\+\s*\{/ &&
checkpatch: Brace handling on multi-line condition CODING_STYLE states the following about braces around blocks: > The opening brace is on the line that contains the control flow > statement that introduces the new block; [...] This is obviously impossible with multi-line conditions. Therefore, CODING_STYLE does not make any clear statement about where to put the opening brace after a multi-line condition. There is a reason to prefer to place the opening brace on an own line after such a condition while still placing it on the same line as the "control flow statement" if possible; that reason is that the last line of a multi-line condition is indented, in the case of "if", it is often indented by four spaces, just as much as the first statement in the block will be indented. This is hard to read as there is no clearly visible distinction between condition and block. Placing the opening brace on a separate line solves this issue. Also, there are cases where placing the opening brace on a separate line is the only viable option; if the previous line had nearly 80 characters and splitting it is not desirable, the opening brace is naturally placed on an own line. This patch fixes checkpatch.pl to not complain about braces on own lines if the condition introducing the block spanned more than one line, or if the previous line had 79 or 80 characters. Furthermore, the warning about not having braces around a block is fixed to mind braces not being on the last line of the condition. Signed-off-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-11-26 17:20:24 +01:00
defined($lines[$ctx_ln - 2]) && length($lines[$ctx_ln - 2]) < 80) {
ERROR("that open brace { should be on the previous line\n" .
"$here\n$ctx\n$rawlines[$ctx_ln - 1]\n");
}
if ($level == 0 && $pre_ctx !~ /}\s*while\s*\($/ &&
$ctx =~ /\)\s*\;\s*$/ &&
defined $lines[$ctx_ln - 1])
{
my ($nlength, $nindent) = line_stats($lines[$ctx_ln - 1]);
if ($nindent > $indent) {
ERROR("trailing semicolon indicates no statements, indent implies otherwise\n" .
"$here\n$ctx\n$rawlines[$ctx_ln - 1]\n");
}
}
}
# 'do ... while (0/false)' only makes sense in macros, without trailing ';'
if ($line =~ /while\s*\((0|false)\);/) {
ERROR("suspicious ; after while (0)\n" . $herecurr);
}
# Check superfluous trailing ';'
if ($line =~ /;;$/) {
ERROR("superfluous trailing semicolon\n" . $herecurr);
}
# Check relative indent for conditionals and blocks.
if ($line =~ /\b(?:(?:if|while|for)\s*\(|do\b)/ && $line !~ /^.\s*#/ && $line !~ /\}\s*while\s*/) {
my ($s, $c) = ($stat, $cond);
substr($s, 0, length($c), '');
# Make sure we remove the line prefixes as we have
# none on the first line, and are going to readd them
# where necessary.
$s =~ s/\n./\n/gs;
# Find out how long the conditional actually is.
my @newlines = ($c =~ /\n/gs);
my $cond_lines = 1 + $#newlines;
# We want to check the first line inside the block
# starting at the end of the conditional, so remove:
# 1) any blank line termination
# 2) any opening brace { on end of the line
# 3) any do (...) {
my $continuation = 0;
my $check = 0;
$s =~ s/^.*\bdo\b//;
$s =~ s/^\s*\{//;
if ($s =~ s/^\s*\\//) {
$continuation = 1;
}
if ($s =~ s/^\s*?\n//) {
$check = 1;
$cond_lines++;
}
# Also ignore a loop construct at the end of a
# preprocessor statement.
if (($prevline =~ /^.\s*#\s*define\s/ ||
$prevline =~ /\\\s*$/) && $continuation == 0) {
$check = 0;
}
my $cond_ptr = -1;
$continuation = 0;
while ($cond_ptr != $cond_lines) {
$cond_ptr = $cond_lines;
# If we see an #else/#elif then the code
# is not linear.
if ($s =~ /^\s*\#\s*(?:else|elif)/) {
$check = 0;
}
# Ignore:
# 1) blank lines, they should be at 0,
# 2) preprocessor lines, and
# 3) labels.
if ($continuation ||
$s =~ /^\s*?\n/ ||
$s =~ /^\s*#\s*?/ ||
$s =~ /^\s*$Ident\s*:/) {
$continuation = ($s =~ /^.*?\\\n/) ? 1 : 0;
if ($s =~ s/^.*?\n//) {
$cond_lines++;
}
}
}
my (undef, $sindent) = line_stats("+" . $s);
my $stat_real = raw_line($linenr, $cond_lines);
# Check if either of these lines are modified, else
# this is not this patch's fault.
if (!defined($stat_real) ||
$stat !~ /^\+/ && $stat_real !~ /^\+/) {
$check = 0;
}
if (defined($stat_real) && $cond_lines > 1) {
$stat_real = "[...]\n$stat_real";
}
#print "line<$line> prevline<$prevline> indent<$indent> sindent<$sindent> check<$check> continuation<$continuation> s<$s> cond_lines<$cond_lines> stat_real<$stat_real> stat<$stat>\n";
if ($check && (($sindent % 4) != 0 ||
($sindent <= $indent && $s ne ''))) {
ERROR("suspect code indent for conditional statements ($indent, $sindent)\n" . $herecurr . "$stat_real\n");
}
}
# Track the 'values' across context and added lines.
my $opline = $line; $opline =~ s/^./ /;
my ($curr_values, $curr_vars) =
annotate_values($opline . "\n", $prev_values);
$curr_values = $prev_values . $curr_values;
if ($dbg_values) {
my $outline = $opline; $outline =~ s/\t/ /g;
print "$linenr > .$outline\n";
print "$linenr > $curr_values\n";
print "$linenr > $curr_vars\n";
}
$prev_values = substr($curr_values, -1);
#ignore lines not being added
if ($line=~/^[^\+]/) {next;}
# TEST: allow direct testing of the type matcher.
if ($dbg_type) {
if ($line =~ /^.\s*$Declare\s*$/) {
ERROR("TEST: is type\n" . $herecurr);
} elsif ($dbg_type > 1 && $line =~ /^.+($Declare)/) {
ERROR("TEST: is not type ($1 is)\n". $herecurr);
}
next;
}
# TEST: allow direct testing of the attribute matcher.
if ($dbg_attr) {
if ($line =~ /^.\s*$Modifier\s*$/) {
ERROR("TEST: is attr\n" . $herecurr);
} elsif ($dbg_attr > 1 && $line =~ /^.+($Modifier)/) {
ERROR("TEST: is not attr ($1 is)\n". $herecurr);
}
next;
}
# check for initialisation to aggregates open brace on the next line
if ($line =~ /^.\s*\{/ &&
$prevline =~ /(?:^|[^=])=\s*$/) {
ERROR("that open brace { should be on the previous line\n" . $hereprev);
}
#
# Checks which are anchored on the added line.
#
# check for malformed paths in #include statements (uses RAW line)
if ($rawline =~ m{^.\s*\#\s*include\s+[<"](.*)[">]}) {
my $path = $1;
if ($path =~ m{//}) {
ERROR("malformed #include filename\n" .
$herecurr);
}
}
# no C99 // comments
if ($line =~ m{//} &&
$rawline !~ m{// SPDX-License-Identifier: }) {
ERROR("do not use C99 // comments\n" . $herecurr);
}
# Remove C99 comments.
$line =~ s@//.*@@;
$opline =~ s@//.*@@;
# check for global initialisers.
if ($line =~ /^.$Type\s*$Ident\s*(?:\s+$Modifier)*\s*=\s*(0|NULL|false)\s*;/) {
ERROR("do not initialise globals to 0 or NULL\n" .
$herecurr);
}
# check for static initialisers.
if ($line =~ /\bstatic\s.*=\s*(0|NULL|false)\s*;/) {
ERROR("do not initialise statics to 0 or NULL\n" .
$herecurr);
}
# * goes on variable not on type
# (char*[ const])
if ($line =~ m{\($NonptrType(\s*(?:$Modifier\b\s*|\*\s*)+)\)}) {
my ($from, $to) = ($1, $1);
# Should start with a space.
$to =~ s/^(\S)/ $1/;
# Should not end with a space.
$to =~ s/\s+$//;
# '*'s should not have spaces between.
while ($to =~ s/\*\s+\*/\*\*/) {
}
#print "from<$from> to<$to>\n";
if ($from ne $to) {
ERROR("\"(foo$from)\" should be \"(foo$to)\"\n" . $herecurr);
}
} elsif ($line =~ m{\b$NonptrType(\s*(?:$Modifier\b\s*|\*\s*)+)($Ident)}) {
my ($from, $to, $ident) = ($1, $1, $2);
# Should start with a space.
$to =~ s/^(\S)/ $1/;
# Should not end with a space.
$to =~ s/\s+$//;
# '*'s should not have spaces between.
while ($to =~ s/\*\s+\*/\*\*/) {
}
# Modifiers should have spaces.
$to =~ s/(\b$Modifier$)/$1 /;
#print "from<$from> to<$to> ident<$ident>\n";
if ($from ne $to && $ident !~ /^$Modifier$/) {
ERROR("\"foo${from}bar\" should be \"foo${to}bar\"\n" . $herecurr);
}
}
# function brace can't be on same line, except for #defines of do while,
# or if closed on same line
if (($line=~/$Type\s*$Ident\(.*\).*\s\{/) and
!($line=~/\#\s*define.*do\s\{/) and !($line=~/}/)) {
ERROR("open brace '{' following function declarations go on the next line\n" . $herecurr);
}
# open braces for enum, union and struct go on the same line.
if ($line =~ /^.\s*\{/ &&
$prevline =~ /^.\s*(?:typedef\s+)?(enum|union|struct)(?:\s+$Ident)?\s*$/) {
ERROR("open brace '{' following $1 go on the same line\n" . $hereprev);
}
# missing space after union, struct or enum definition
if ($line =~ /^.\s*(?:typedef\s+)?(enum|union|struct)(?:\s+$Ident)?(?:\s+$Ident)?[=\{]/) {
ERROR("missing space after $1 definition\n" . $herecurr);
}
# check for spacing round square brackets; allowed:
# 1. with a type on the left -- int [] a;
# 2. at the beginning of a line for slice initialisers -- [0...10] = 5,
# 3. inside a curly brace -- = { [0...10] = 5 }
# 4. after a comma -- [1] = 5, [2] = 6
# 5. in a macro definition -- #define abc(x) [x] = y
while ($line =~ /(.*?\s)\[/g) {
my ($where, $prefix) = ($-[1], $1);
if ($prefix !~ /$Type\s+$/ &&
($where != 0 || $prefix !~ /^.\s+$/) &&
$prefix !~ /\#\s*define[^(]*\([^)]*\)\s+$/ &&
$prefix !~ /[,{:]\s+$/) {
ERROR("space prohibited before open square bracket '['\n" . $herecurr);
}
}
# check for spaces between functions and their parentheses.
while ($line =~ /($Ident)\s+\(/g) {
my $name = $1;
my $ctx_before = substr($line, 0, $-[1]);
my $ctx = "$ctx_before$name";
# Ignore those directives where spaces _are_ permitted.
if ($name =~ /^(?:
if|for|while|switch|return|case|
volatile|__volatile__|coroutine_fn|
__attribute__|format|__extension__|
asm|__asm__)$/x)
{
# Ignore 'catch (...)' in C++
} elsif ($name =~ /^catch$/ && $realfile =~ /(\.cpp|\.h)$/) {
# cpp #define statements have non-optional spaces, ie
# if there is a space between the name and the open
# parenthesis it is simply not a parameter group.
} elsif ($ctx_before =~ /^.\s*\#\s*define\s*$/) {
# cpp #elif statement condition may start with a (
} elsif ($ctx =~ /^.\s*\#\s*elif\s*$/) {
# If this whole things ends with a type its most
# likely a typedef for a function.
} elsif ($ctx =~ /$Type$/) {
} else {
ERROR("space prohibited between function name and open parenthesis '('\n" . $herecurr);
}
}
# Check operator spacing.
if (!($line=~/\#\s*include/)) {
my $ops = qr{
<<=|>>=|<=|>=|==|!=|
\+=|-=|\*=|\/=|%=|\^=|\|=|&=|
=>|->|<<|>>|<|>|=|!|~|
&&|\|\||,|\^|\+\+|--|&|\||\+|-|\*|\/|%|
\?|::|:
}x;
my @elements = split(/($ops|;)/, $opline);
my $off = 0;
my $blank = copy_spacing($opline);
for (my $n = 0; $n < $#elements; $n += 2) {
$off += length($elements[$n]);
# Pick up the preceding and succeeding characters.
my $ca = substr($opline, 0, $off);
my $cc = '';
if (length($opline) >= ($off + length($elements[$n + 1]))) {
$cc = substr($opline, $off + length($elements[$n + 1]));
}
my $cb = "$ca$;$cc";
my $a = '';
$a = 'V' if ($elements[$n] ne '');
$a = 'W' if ($elements[$n] =~ /\s$/);
$a = 'C' if ($elements[$n] =~ /$;$/);
$a = 'B' if ($elements[$n] =~ /(\[|\()$/);
$a = 'O' if ($elements[$n] eq '');
$a = 'E' if ($ca =~ /^\s*$/);
my $op = $elements[$n + 1];
my $c = '';
if (defined $elements[$n + 2]) {
$c = 'V' if ($elements[$n + 2] ne '');
$c = 'W' if ($elements[$n + 2] =~ /^\s/);
$c = 'C' if ($elements[$n + 2] =~ /^$;/);
$c = 'B' if ($elements[$n + 2] =~ /^(\)|\]|;)/);
$c = 'O' if ($elements[$n + 2] eq '');
$c = 'E' if ($elements[$n + 2] =~ /^\s*\\$/);
} else {
$c = 'E';
}
my $ctx = "${a}x${c}";
my $at = "(ctx:$ctx)";
my $ptr = substr($blank, 0, $off) . "^";
my $hereptr = "$hereline$ptr\n";
# Pull out the value of this operator.
my $op_type = substr($curr_values, $off + 1, 1);
# Get the full operator variant.
my $opv = $op . substr($curr_vars, $off, 1);
# Ignore operators passed as parameters.
if ($op_type ne 'V' &&
$ca =~ /\s$/ && $cc =~ /^\s*,/) {
# # Ignore comments
# } elsif ($op =~ /^$;+$/) {
# ; should have either the end of line or a space or \ after it
} elsif ($op eq ';') {
if ($ctx !~ /.x[WEBC]/ &&
$cc !~ /^\\/ && $cc !~ /^;/) {
ERROR("space required after that '$op' $at\n" . $hereptr);
}
# // is a comment
} elsif ($op eq '//') {
# Ignore : used in class declaration in C++
} elsif ($opv eq ':B' && $ctx =~ /Wx[WE]/ &&
$line =~ /class/ && $realfile =~ /(\.cpp|\.h)$/) {
# No spaces for:
# ->
# : when part of a bitfield
} elsif ($op eq '->' || $opv eq ':B') {
if ($ctx =~ /Wx.|.xW/) {
ERROR("spaces prohibited around that '$op' $at\n" . $hereptr);
}
# , must have a space on the right.
# not required when having a single },{ on one line
} elsif ($op eq ',') {
if ($ctx !~ /.x[WEC]/ && $cc !~ /^}/ &&
($elements[$n] . $elements[$n + 2]) !~ " *}\\{") {
ERROR("space required after that '$op' $at\n" . $hereptr);
}
# '*' as part of a type definition -- reported already.
} elsif ($opv eq '*_') {
#warn "'*' is part of type\n";
# unary operators should have a space before and
# none after. May be left adjacent to another
# unary operator, or a cast
} elsif ($op eq '!' || $op eq '~' ||
$opv eq '*U' || $opv eq '-U' ||
$opv eq '&U' || $opv eq '&&U') {
if ($op eq '~' && $ca =~ /::$/ && $realfile =~ /(\.cpp|\.h)$/) {
# '~' used as a name of Destructor
} elsif ($ctx !~ /[WEBC]x./ && $ca !~ /(?:\)|!|~|\*|-|\&|\||\+\+|\-\-|\{)$/) {
ERROR("space required before that '$op' $at\n" . $hereptr);
}
if ($op eq '*' && $cc =~/\s*$Modifier\b/) {
# A unary '*' may be const
} elsif ($ctx =~ /.xW/) {
ERROR("space prohibited after that '$op' $at\n" . $hereptr);
}
# unary ++ and unary -- are allowed no space on one side.
} elsif ($op eq '++' or $op eq '--') {
if ($ctx !~ /[WEOBC]x[^W]/ && $ctx !~ /[^W]x[WOBEC]/) {
ERROR("space required one side of that '$op' $at\n" . $hereptr);
}
if ($ctx =~ /Wx[BE]/ ||
($ctx =~ /Wx./ && $cc =~ /^;/)) {
ERROR("space prohibited before that '$op' $at\n" . $hereptr);
}
if ($ctx =~ /ExW/) {
ERROR("space prohibited after that '$op' $at\n" . $hereptr);
}
# A colon needs no spaces before when it is
# terminating a case value or a label.
} elsif ($opv eq ':C' || $opv eq ':L') {
if ($ctx =~ /Wx./) {
ERROR("space prohibited before that '$op' $at\n" . $hereptr);
}
# All the others need spaces both sides.
} elsif ($ctx !~ /[EWC]x[CWE]/) {
my $ok = 0;
if ($realfile =~ /\.cpp|\.h$/) {
# Ignore template arguments <...> in C++
if (($op eq '<' || $op eq '>') && $line =~ /<.*>/) {
$ok = 1;
}
# Ignore :: in C++
if ($op eq '::') {
$ok = 1;
}
}
# Ignore email addresses <foo@bar>
if (($op eq '<' &&
$cc =~ /^\S+\@\S+>/) ||
($op eq '>' &&
$ca =~ /<\S+\@\S+$/))
{
$ok = 1;
}
# Ignore ?:
if (($opv eq ':O' && $ca =~ /\?$/) ||
($op eq '?' && $cc =~ /^:/)) {
$ok = 1;
}
if ($ok == 0) {
ERROR("spaces required around that '$op' $at\n" . $hereptr);
}
}
$off += length($elements[$n + 1]);
}
}
#need space before brace following if, while, etc
if (($line =~ /\(.*\)\{/ && $line !~ /\($Type\)\{/) ||
$line =~ /do\{/) {
ERROR("space required before the open brace '{'\n" . $herecurr);
}
# closing brace should have a space following it when it has anything
# on the line
if ($line =~ /}(?!(?:,|;|\)))\S/) {
ERROR("space required after that close brace '}'\n" . $herecurr);
}
# check spacing on square brackets
if ($line =~ /\[\s/ && $line !~ /\[\s*$/) {
ERROR("space prohibited after that open square bracket '['\n" . $herecurr);
}
if ($line =~ /\s\]/) {
ERROR("space prohibited before that close square bracket ']'\n" . $herecurr);
}
# check spacing on parentheses
if ($line =~ /\(\s/ && $line !~ /\(\s*(?:\\)?$/ &&
$line !~ /for\s*\(\s+;/) {
ERROR("space prohibited after that open parenthesis '('\n" . $herecurr);
}
if ($line =~ /(\s+)\)/ && $line !~ /^.\s*\)/ &&
$line !~ /for\s*\(.*;\s+\)/ &&
$line !~ /:\s+\)/) {
ERROR("space prohibited before that close parenthesis ')'\n" . $herecurr);
}
# Return is not a function.
if (defined($stat) && $stat =~ /^.\s*return(\s*)(\(.*);/s) {
my $spacing = $1;
my $value = $2;
# Flatten any parentheses
$value =~ s/\(/ \(/g;
$value =~ s/\)/\) /g;
while ($value =~ s/\[[^\{\}]*\]/1/ ||
$value !~ /(?:$Ident|-?$Constant)\s*
$Compare\s*
(?:$Ident|-?$Constant)/x &&
$value =~ s/\([^\(\)]*\)/1/) {
}
#print "value<$value>\n";
if ($value =~ /^\s*(?:$Ident|-?$Constant)\s*$/ &&
$line =~ /;$/) {
ERROR("return is not a function, parentheses are not required\n" . $herecurr);
} elsif ($spacing !~ /\s+/) {
ERROR("space required before the open parenthesis '('\n" . $herecurr);
}
}
# Return of what appears to be an errno should normally be -'ve
if ($line =~ /^.\s*return\s*(E[A-Z]*)\s*;/) {
my $name = $1;
if ($name ne 'EOF' && $name ne 'ERROR') {
ERROR("return of an errno should typically be -ve (return -$1)\n" . $herecurr);
}
}
if ($line =~ /^.\s*(Q(?:S?LIST|SIMPLEQ|TAILQ)_HEAD)\s*\(\s*[^,]/ &&
$line !~ /^.typedef/) {
ERROR("named $1 should be typedefed separately\n" . $herecurr);
}
# Need a space before open parenthesis after if, while etc
if ($line=~/\b(if|while|for|switch)\(/) {
ERROR("space required before the open parenthesis '('\n" . $herecurr);
}
# Check for illegal assignment in if conditional -- and check for trailing
# statements after the conditional.
if ($line =~ /do\s*(?!{)/) {
my ($stat_next) = ctx_statement_block($line_nr_next,
$remain_next, $off_next);
$stat_next =~ s/\n./\n /g;
##print "stat<$stat> stat_next<$stat_next>\n";
if ($stat_next =~ /^\s*while\b/) {
# If the statement carries leading newlines,
# then count those as offsets.
my ($whitespace) =
($stat_next =~ /^((?:\s*\n[+-])*\s*)/s);
my $offset =
statement_rawlines($whitespace) - 1;
$suppress_whiletrailers{$line_nr_next +
$offset} = 1;
}
}
if (!defined $suppress_whiletrailers{$linenr} &&
$line =~ /\b(?:if|while|for)\s*\(/ && $line !~ /^.\s*#/) {
my ($s, $c) = ($stat, $cond);
if ($c =~ /\bif\s*\(.*[^<>!=]=[^=].*/s) {
ERROR("do not use assignment in if condition\n" . $herecurr);
}
# Find out what is on the end of the line after the
# conditional.
substr($s, 0, length($c), '');
$s =~ s/\n.*//g;
$s =~ s/$;//g; # Remove any comments
if (length($c) && $s !~ /^\s*{?\s*\\*\s*$/ &&
$c !~ /}\s*while\s*/)
{
# Find out how long the conditional actually is.
my @newlines = ($c =~ /\n/gs);
my $cond_lines = 1 + $#newlines;
my $stat_real = '';
$stat_real = raw_line($linenr, $cond_lines)
. "\n" if ($cond_lines);
if (defined($stat_real) && $cond_lines > 1) {
$stat_real = "[...]\n$stat_real";
}
ERROR("trailing statements should be on next line\n" . $herecurr . $stat_real);
}
}
# Check for bitwise tests written as boolean
if ($line =~ /
(?:
(?:\[|\(|\&\&|\|\|)
\s*0[xX][0-9]+\s*
(?:\&\&|\|\|)
|
(?:\&\&|\|\|)
\s*0[xX][0-9]+\s*
(?:\&\&|\|\||\)|\])
)/x)
{
ERROR("boolean test with hexadecimal, perhaps just 1 \& or \|?\n" . $herecurr);
}
# if and else should not have general statements after it
if ($line =~ /^.\s*(?:}\s*)?else\b(.*)/) {
my $s = $1;
$s =~ s/$;//g; # Remove any comments
if ($s !~ /^\s*(?:\sif|(?:{|)\s*\\?\s*$)/) {
ERROR("trailing statements should be on next line\n" . $herecurr);
}
}
# if should not continue a brace
if ($line =~ /}\s*if\b/) {
ERROR("trailing statements should be on next line\n" .
$herecurr);
}
# case and default should not have general statements after them
if ($line =~ /^.\s*(?:case\s*.*|default\s*):/g &&
$line !~ /\G(?:
(?:\s*$;*)(?:\s*{)?(?:\s*$;*)(?:\s*\\)?\s*$|
\s*return\s+
)/xg)
{
ERROR("trailing statements should be on next line\n" . $herecurr);
}
# Check for }<nl>else {, these must be at the same
# indent level to be relevant to each other.
if ($prevline=~/}\s*$/ and $line=~/^.\s*else\s*/ and
$previndent == $indent) {
ERROR("else should follow close brace '}'\n" . $hereprev);
}
if ($prevline=~/}\s*$/ and $line=~/^.\s*while\s*/ and
$previndent == $indent) {
my ($s, $c) = ctx_statement_block($linenr, $realcnt, 0);
# Find out what is on the end of the line after the
# conditional.
substr($s, 0, length($c), '');
$s =~ s/\n.*//g;
if ($s =~ /^\s*;/) {
ERROR("while should follow close brace '}'\n" . $hereprev);
}
}
#studly caps, commented out until figure out how to distinguish between use of existing and adding new
# if (($line=~/[\w_][a-z\d]+[A-Z]/) and !($line=~/print/)) {
# print "No studly caps, use _\n";
# print "$herecurr";
# $clean = 0;
# }
#no spaces allowed after \ in define
if ($line=~/\#\s*define.*\\\s$/) {
ERROR("Whitespace after \\ makes next lines useless\n" . $herecurr);
}
# multi-statement macros should be enclosed in a do while loop, grab the
# first statement and ensure its the whole macro if its not enclosed
# in a known good container
if ($realfile !~ m@/vmlinux.lds.h$@ &&
$line =~ /^.\s*\#\s*define\s*$Ident(\()?/) {
my $ln = $linenr;
my $cnt = $realcnt;
my ($off, $dstat, $dcond, $rest);
my $ctx = '';
my $args = defined($1);
# Find the end of the macro and limit our statement
# search to that.
while ($cnt > 0 && defined $lines[$ln - 1] &&
$lines[$ln - 1] =~ /^(?:-|..*\\$)/)
{
$ctx .= $rawlines[$ln - 1] . "\n";
$cnt-- if ($lines[$ln - 1] !~ /^-/);
$ln++;
}
$ctx .= $rawlines[$ln - 1];
($dstat, $dcond, $ln, $cnt, $off) =
ctx_statement_block($linenr, $ln - $linenr + 1, 0);
#print "dstat<$dstat> dcond<$dcond> cnt<$cnt> off<$off>\n";
#print "LINE<$lines[$ln-1]> len<" . length($lines[$ln-1]) . "\n";
# Extract the remainder of the define (if any) and
# rip off surrounding spaces, and trailing \'s.
$rest = '';
while ($off != 0 || ($cnt > 0 && $rest =~ /\\\s*$/)) {
#print "ADDING cnt<$cnt> $off <" . substr($lines[$ln - 1], $off) . "> rest<$rest>\n";
if ($off != 0 || $lines[$ln - 1] !~ /^-/) {
$rest .= substr($lines[$ln - 1], $off) . "\n";
$cnt--;
}
$ln++;
$off = 0;
}
$rest =~ s/\\\n.//g;
$rest =~ s/^\s*//s;
$rest =~ s/\s*$//s;
# Clean up the original statement.
if ($args) {
substr($dstat, 0, length($dcond), '');
} else {
$dstat =~ s/^.\s*\#\s*define\s+$Ident\s*//;
}
$dstat =~ s/$;//g;
$dstat =~ s/\\\n.//g;
$dstat =~ s/^\s*//s;
$dstat =~ s/\s*$//s;
# Flatten any parentheses and braces
while ($dstat =~ s/\([^\(\)]*\)/1/ ||
$dstat =~ s/\{[^\{\}]*\}/1/ ||
$dstat =~ s/\[[^\{\}]*\]/1/)
{
}
my $exceptions = qr{
$Declare|
module_param_named|
MODULE_PARAM_DESC|
DECLARE_PER_CPU|
DEFINE_PER_CPU|
__typeof__\(|
union|
struct|
\.$Ident\s*=\s*|
^\"|\"$
}x;
#print "REST<$rest> dstat<$dstat> ctx<$ctx>\n";
if ($rest ne '' && $rest ne ',') {
if ($rest !~ /while\s*\(/ &&
$dstat !~ /$exceptions/)
{
ERROR("Macros with multiple statements should be enclosed in a do - while loop\n" . "$here\n$ctx\n");
}
} elsif ($ctx !~ /;/) {
if ($dstat ne '' &&
$dstat !~ /^(?:$Ident|-?$Constant)$/ &&
$dstat !~ /$exceptions/ &&
$dstat !~ /^\.$Ident\s*=/ &&
$dstat =~ /$Operators/)
{
ERROR("Macros with complex values should be enclosed in parenthesis\n" . "$here\n$ctx\n");
}
}
}
# check for missing bracing around if etc
if ($line =~ /(^.*)\b(?:if|while|for)\b/ &&
$line !~ /\#\s*if/) {
my $allowed = 0;
# Check the pre-context.
if ($line =~ /(\}.*?)$/) {
my $pre = $1;
if ($line !~ /else/) {
print "APW: ALLOWED: pre<$pre> line<$line>\n"
if $dbg_adv_apw;
$allowed = 1;
}
}
my ($level, $endln, @chunks) =
ctx_statement_full($linenr, $realcnt, 1);
if ($dbg_adv_apw) {
print "APW: chunks<$#chunks> linenr<$linenr> endln<$endln> level<$level>\n";
print "APW: <<$chunks[1][0]>><<$chunks[1][1]>>\n"
if $#chunks >= 1;
}
if ($#chunks >= 0 && $level == 0) {
my $seen = 0;
my $herectx = $here . "\n";
my $ln = $linenr - 1;
for my $chunk (@chunks) {
my ($cond, $block) = @{$chunk};
# If the condition carries leading newlines, then count those as offsets.
my ($whitespace) = ($cond =~ /^((?:\s*\n[+-])*\s*)/s);
my $offset = statement_rawlines($whitespace) - 1;
#print "COND<$cond> whitespace<$whitespace> offset<$offset>\n";
# We have looked at and allowed this specific line.
$suppress_ifbraces{$ln + $offset} = 1;
$herectx .= "$rawlines[$ln + $offset]\n[...]\n";
$ln += statement_rawlines($block) - 1;
substr($block, 0, length($cond), '');
checkpatch: Brace handling on multi-line condition CODING_STYLE states the following about braces around blocks: > The opening brace is on the line that contains the control flow > statement that introduces the new block; [...] This is obviously impossible with multi-line conditions. Therefore, CODING_STYLE does not make any clear statement about where to put the opening brace after a multi-line condition. There is a reason to prefer to place the opening brace on an own line after such a condition while still placing it on the same line as the "control flow statement" if possible; that reason is that the last line of a multi-line condition is indented, in the case of "if", it is often indented by four spaces, just as much as the first statement in the block will be indented. This is hard to read as there is no clearly visible distinction between condition and block. Placing the opening brace on a separate line solves this issue. Also, there are cases where placing the opening brace on a separate line is the only viable option; if the previous line had nearly 80 characters and splitting it is not desirable, the opening brace is naturally placed on an own line. This patch fixes checkpatch.pl to not complain about braces on own lines if the condition introducing the block spanned more than one line, or if the previous line had 79 or 80 characters. Furthermore, the warning about not having braces around a block is fixed to mind braces not being on the last line of the condition. Signed-off-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-11-26 17:20:24 +01:00
my $spaced_block = $block;
$spaced_block =~ s/\n\+/ /g;
$seen++ if ($spaced_block =~ /^\s*\{/);
print "APW: cond<$cond> block<$block> allowed<$allowed>\n"
if $dbg_adv_apw;
if (statement_lines($cond) > 1) {
print "APW: ALLOWED: cond<$cond>\n"
if $dbg_adv_apw;
$allowed = 1;
}
if ($block =~/\b(?:if|for|while)\b/) {
print "APW: ALLOWED: block<$block>\n"
if $dbg_adv_apw;
$allowed = 1;
}
if (statement_block_size($block) > 1) {
print "APW: ALLOWED: lines block<$block>\n"
if $dbg_adv_apw;
$allowed = 1;
}
}
if ($seen != ($#chunks + 1) && !$allowed) {
ERROR("braces {} are necessary for all arms of this statement\n" . $herectx);
}
}
}
if (!defined $suppress_ifbraces{$linenr - 1} &&
$line =~ /\b(if|while|for|else)\b/ &&
$line !~ /\#\s*if/ &&
$line !~ /\#\s*else/) {
my $allowed = 0;
# Check the pre-context.
if (substr($line, 0, $-[0]) =~ /(\}\s*)$/) {
my $pre = $1;
if ($line !~ /else/) {
print "APW: ALLOWED: pre<$pre> line<$line>\n"
if $dbg_adv_apw;
$allowed = 1;
}
}
my ($level, $endln, @chunks) =
ctx_statement_full($linenr, $realcnt, $-[0]);
# Check the condition.
my ($cond, $block) = @{$chunks[0]};
print "CHECKING<$linenr> cond<$cond> block<$block>\n"
if $dbg_adv_checking;
if (defined $cond) {
substr($block, 0, length($cond), '');
}
if (statement_lines($cond) > 1) {
print "APW: ALLOWED: cond<$cond>\n"
if $dbg_adv_apw;
$allowed = 1;
}
if ($block =~/\b(?:if|for|while)\b/) {
print "APW: ALLOWED: block<$block>\n"
if $dbg_adv_apw;
$allowed = 1;
}
if (statement_block_size($block) > 1) {
print "APW: ALLOWED: lines block<$block>\n"
if $dbg_adv_apw;
$allowed = 1;
}
# Check the post-context.
if (defined $chunks[1]) {
my ($cond, $block) = @{$chunks[1]};
if (defined $cond) {
substr($block, 0, length($cond), '');
}
if ($block =~ /^\s*\{/) {
print "APW: ALLOWED: chunk-1 block<$block>\n"
if $dbg_adv_apw;
$allowed = 1;
}
}
print "DCS: level=$level block<$block> allowed=$allowed\n"
if $dbg_adv_dcs;
if ($level == 0 && $block !~ /^\s*\{/ && !$allowed) {
my $herectx = $here . "\n";;
my $cnt = statement_rawlines($block);
for (my $n = 0; $n < $cnt; $n++) {
$herectx .= raw_line($linenr, $n) . "\n";;
}
ERROR("braces {} are necessary even for single statement blocks\n" . $herectx);
}
}
# no volatiles please
my $asm_volatile = qr{\b(__asm__|asm)\s+(__volatile__|volatile)\b};
if ($line =~ /\bvolatile\b/ && $line !~ /$asm_volatile/ &&
$line !~ /sig_atomic_t/ &&
!ctx_has_comment($first_line, $linenr)) {
my $msg = "Use of volatile is usually wrong, please add a comment\n" . $herecurr;
ERROR($msg);
}
# warn about #if 0
if ($line =~ /^.\s*\#\s*if\s+0\b/) {
ERROR("if this code is redundant consider removing it\n" .
$herecurr);
}
# check for needless g_free() checks
if ($prevline =~ /\bif\s*\(([^\)]*)\)/) {
my $expr = $1;
if ($line =~ /\bg_free\(\Q$expr\E\);/) {
ERROR("g_free(NULL) is safe this check is probably not required\n" . $hereprev);
}
}
# warn about #ifdefs in C files
# if ($line =~ /^.\s*\#\s*if(|n)def/ && ($realfile =~ /\.c$/)) {
# print "#ifdef in C files should be avoided\n";
# print "$herecurr";
# $clean = 0;
# }
# warn about spacing in #ifdefs
if ($line =~ /^.\s*\#\s*(ifdef|ifndef|elif)\s\s+/) {
ERROR("exactly one space required after that #$1\n" . $herecurr);
}
# check for memory barriers without a comment.
if ($line =~ /\b(smp_mb|smp_rmb|smp_wmb|smp_read_barrier_depends)\(/) {
if (!ctx_has_comment($first_line, $linenr)) {
ERROR("memory barrier without comment\n" . $herecurr);
}
}
# check of hardware specific defines
# we have e.g. CONFIG_LINUX and CONFIG_WIN32 for common cases
# where they might be necessary.
if ($line =~ m@^.\s*\#\s*if.*\b__@) {
WARN("architecture specific defines should be avoided\n" . $herecurr);
}
# Check that the storage class is at the beginning of a declaration
if ($line =~ /\b$Storage\b/ && $line !~ /^.\s*$Storage\b/) {
ERROR("storage class should be at the beginning of the declaration\n" . $herecurr)
}
# check the location of the inline attribute, that it is between
# storage class and type.
if ($line =~ /\b$Type\s+$Inline\b/ ||
$line =~ /\b$Inline\s+$Storage\b/) {
ERROR("inline keyword should sit between storage class and type\n" . $herecurr);
}
# check for sizeof(&)
if ($line =~ /\bsizeof\s*\(\s*\&/) {
ERROR("sizeof(& should be avoided\n" . $herecurr);
}
# check for new externs in .c files.
if ($realfile =~ /\.c$/ && defined $stat &&
$stat =~ /^.\s*(?:extern\s+)?$Type\s+($Ident)(\s*)\(/s)
{
my $function_name = $1;
my $paren_space = $2;
my $s = $stat;
if (defined $cond) {
substr($s, 0, length($cond), '');
}
if ($s =~ /^\s*;/ &&
$function_name ne 'uninitialized_var')
{
ERROR("externs should be avoided in .c files\n" . $herecurr);
}
if ($paren_space =~ /\n/) {
ERROR("arguments for function declarations should follow identifier\n" . $herecurr);
}
} elsif ($realfile =~ /\.c$/ && defined $stat &&
$stat =~ /^.\s*extern\s+/)
{
ERROR("externs should be avoided in .c files\n" . $herecurr);
}
# check for pointless casting of g_malloc return
if ($line =~ /\*\s*\)\s*g_(try)?(m|re)alloc(0?)(_n)?\b/) {
if ($2 == 'm') {
ERROR("unnecessary cast may hide bugs, use g_$1new$3 instead\n" . $herecurr);
} else {
ERROR("unnecessary cast may hide bugs, use g_$1renew$3 instead\n" . $herecurr);
}
}
# check for gcc specific __FUNCTION__
if ($line =~ /__FUNCTION__/) {
ERROR("__func__ should be used instead of gcc specific __FUNCTION__\n" . $herecurr);
}
# recommend g_path_get_* over g_strdup(basename/dirname(...))
if ($line =~ /\bg_strdup\s*\(\s*(basename|dirname)\s*\(/) {
WARN("consider using g_path_get_$1() in preference to g_strdup($1())\n" . $herecurr);
}
# recommend qemu_strto* over strto* for numeric conversions
if ($line =~ /\b(strto[^kd].*?)\s*\(/) {
ERROR("consider using qemu_$1 in preference to $1\n" . $herecurr);
}
# recommend sigaction over signal for portability, when establishing a handler
if ($line =~ /\bsignal\s*\(/ && !($line =~ /SIG_(?:IGN|DFL)/)) {
ERROR("use sigaction to establish signal handlers; signal is not portable\n" . $herecurr);
}
# check for module_init(), use category-specific init macros explicitly please
if ($line =~ /^module_init\s*\(/) {
ERROR("please use block_init(), type_init() etc. instead of module_init()\n" . $herecurr);
}
# check for various ops structs, ensure they are const.
my $struct_ops = qr{AIOCBInfo|
BdrvActionOps|
BlockDevOps|
BlockJobDriver|
DisplayChangeListenerOps|
GraphicHwOps|
IDEDMAOps|
KVMCapabilityInfo|
MemoryRegionIOMMUOps|
MemoryRegionOps|
MemoryRegionPortio|
QEMUFileOps|
SCSIBusInfo|
SCSIReqOps|
Spice[A-Z][a-zA-Z0-9]*Interface|
USBDesc[A-Z][a-zA-Z0-9]*|
VhostOps|
VMStateDescription|
VMStateInfo}x;
if ($line !~ /\bconst\b/ &&
$line =~ /\b($struct_ops)\b.*=/) {
ERROR("initializer for struct $1 should normally be const\n" .
$herecurr);
}
# check for %L{u,d,i} in strings
my $string;
while ($line =~ /(?:^|")([X\t]*)(?:"|$)/g) {
$string = substr($rawline, $-[1], $+[1] - $-[1]);
$string =~ s/%%/__/g;
if ($string =~ /(?<!%)%L[udi]/) {
ERROR("\%Ld/%Lu are not-standard C, use %lld/%llu\n" . $herecurr);
last;
}
}
# QEMU specific tests
if ($rawline =~ /\b(?:Qemu|QEmu)\b/) {
ERROR("use QEMU instead of Qemu or QEmu\n" . $herecurr);
}
# Qemu error function tests
# Find newlines in error messages
my $qemu_error_funcs = qr{error_setg|
error_setg_errno|
error_setg_win32|
error_setg_file_open|
error_set|
error_prepend|
warn_reportf_err|
error_reportf_err|
error_vreport|
warn_vreport|
info_vreport|
error_report|
warn_report|
info_report|
g_test_message}x;
if ($rawline =~ /\b(?:$qemu_error_funcs)\s*\(.*\".*\\n/) {
ERROR("Error messages should not contain newlines\n" . $herecurr);
}
# Continue checking for error messages that contains newlines. This
# check handles cases where string literals are spread over multiple lines.
# Example:
# error_report("Error msg line #1"
# "Error msg line #2\n");
my $quoted_newline_regex = qr{\+\s*\".*\\n.*\"};
my $continued_str_literal = qr{\+\s*\".*\"};
if ($rawline =~ /$quoted_newline_regex/) {
# Backtrack to first line that does not contain only a quoted literal
# and assume that it is the start of the statement.
my $i = $linenr - 2;
while (($i >= 0) & $rawlines[$i] =~ /$continued_str_literal/) {
$i--;
}
if ($rawlines[$i] =~ /\b(?:$qemu_error_funcs)\s*\(/) {
ERROR("Error messages should not contain newlines\n" . $herecurr);
}
}
# check for non-portable libc calls that have portable alternatives in QEMU
if ($line =~ /\bffs\(/) {
ERROR("use ctz32() instead of ffs()\n" . $herecurr);
}
if ($line =~ /\bffsl\(/) {
ERROR("use ctz32() or ctz64() instead of ffsl()\n" . $herecurr);
}
if ($line =~ /\bffsll\(/) {
ERROR("use ctz64() instead of ffsll()\n" . $herecurr);
}
if ($line =~ /\bbzero\(/) {
ERROR("use memset() instead of bzero()\n" . $herecurr);
}
if ($line =~ /\bgetpagesize\(\)/) {
ERROR("use qemu_real_host_page_size instead of getpagesize()\n" . $herecurr);
}
if ($line =~ /\bsysconf\(_SC_PAGESIZE\)/) {
ERROR("use qemu_real_host_page_size instead of sysconf(_SC_PAGESIZE)\n" . $herecurr);
}
my $non_exit_glib_asserts = qr{g_assert_cmpstr|
g_assert_cmpint|
g_assert_cmpuint|
g_assert_cmphex|
g_assert_cmpfloat|
g_assert_true|
g_assert_false|
g_assert_nonnull|
g_assert_null|
g_assert_no_error|
g_assert_error|
g_test_assert_expected_messages|
g_test_trap_assert_passed|
g_test_trap_assert_stdout|
g_test_trap_assert_stdout_unmatched|
g_test_trap_assert_stderr|
g_test_trap_assert_stderr_unmatched}x;
if ($realfile !~ /^tests\// &&
$line =~ /\b(?:$non_exit_glib_asserts)\(/) {
ERROR("Use g_assert or g_assert_not_reached\n". $herecurr);
}
}
if ($is_patch && $chk_signoff && $signoff == 0) {
ERROR("Missing Signed-off-by: line(s)\n");
}
# If we have no input at all, then there is nothing to report on
# so just keep quiet.
if ($#rawlines == -1) {
return 1;
}
# In mailback mode only produce a report in the negative, for
# things that appear to be patches.
if ($mailback && ($clean == 1 || !$is_patch)) {
return 1;
}
# This is not a patch, and we are are in 'no-patch' mode so
# just keep quiet.
if (!$chk_patch && !$is_patch) {
return 1;
}
if (!$is_patch) {
ERROR("Does not appear to be a unified-diff format patch\n");
}
print report_dump();
if ($summary && !($clean == 1 && $quiet == 1)) {
print "$filename " if ($summary_file);
print "total: $cnt_error errors, $cnt_warn warnings, " .
"$cnt_lines lines checked\n";
print "\n" if ($quiet == 0);
}
if ($quiet == 0) {
# If there were whitespace errors which cleanpatch can fix
# then suggest that.
# if ($rpt_cleaners) {
# print "NOTE: whitespace errors detected, you may wish to use scripts/cleanpatch or\n";
# print " scripts/cleanfile\n\n";
# }
}
if ($clean == 1 && $quiet == 0) {
print "$vname has no obvious style problems and is ready for submission.\n"
}
if ($clean == 0 && $quiet == 0) {
print "$vname has style problems, please review. If any of these errors\n";
print "are false positives report them to the maintainer, see\n";
print "CHECKPATCH in MAINTAINERS.\n";
}
return ($no_warnings ? $clean : $cnt_error == 0);
}