qemu-e2k/ui/vnc-auth-sasl.c

623 lines
19 KiB
C
Raw Normal View History

Add SASL authentication support ("Daniel P. Berrange") This patch adds the new SASL authentication protocol to the VNC server. It is enabled by setting the 'sasl' flag when launching VNC. SASL can optionally provide encryption via its SSF layer, if a suitable mechanism is configured (eg, GSSAPI/Kerberos, or Digest-MD5). If an SSF layer is not available, then it should be combined with the x509 VNC authentication protocol which provides encryption. eg, if using GSSAPI qemu -vnc localhost:1,sasl eg if using TLS/x509 for encryption qemu -vnc localhost:1,sasl,tls,x509 By default the Cyrus SASL library will look for its configuration in the file /etc/sasl2/qemu.conf. For non-root users, this can be overridden by setting the SASL_CONF_PATH environment variable, eg to make it look in $HOME/.sasl2. NB unprivileged users may not have access to the full range of SASL mechanisms, since some of them require some administrative privileges to configure. The patch includes an example SASL configuration file which illustrates config for GSSAPI and Digest-MD5, though it should be noted that the latter is not really considered secure any more. Most of the SASL authentication code is located in a separate source file, vnc-auth-sasl.c. The main vnc.c file only contains minimal integration glue, specifically parsing of command line flags / setup, and calls to start the SASL auth process, to do encoding/decoding for data. There are several possible stacks for reading & writing of data, depending on the combo of VNC authentication methods in use - Clear. read/write straight to socket - TLS. read/write via GNUTLS helpers - SASL. encode/decode via SASL SSF layer, then read/write to socket - SASL+TLS. encode/decode via SASL SSF layer, then read/write via GNUTLS Hence, the vnc_client_read & vnc_client_write methods have been refactored a little. vnc_client_read: main entry point for reading, calls either - vnc_client_read_plain reading, with no intermediate decoding - vnc_client_read_sasl reading, with SASL SSF decoding These two methods, then call vnc_client_read_buf(). This decides whether to write to the socket directly or write via GNUTLS. The situation is the same for writing data. More extensive comments have been added in the code / patch. The vnc_client_read_sasl and vnc_client_write_sasl method implementations live in the separate vnc-auth-sasl.c file. The state required for the SASL auth mechanism is kept in a separate VncStateSASL struct, defined in vnc-auth-sasl.h and included in the main VncState. The configure script probes for SASL and automatically enables it if found, unless --disable-vnc-sasl was given to override it. Makefile | 7 Makefile.target | 5 b/qemu.sasl | 34 ++ b/vnc-auth-sasl.c | 626 ++++++++++++++++++++++++++++++++++++++++++++++++++++ b/vnc-auth-sasl.h | 67 +++++ configure | 34 ++ qemu-doc.texi | 97 ++++++++ vnc-auth-vencrypt.c | 12 vnc.c | 249 ++++++++++++++++++-- vnc.h | 31 ++ 10 files changed, 1129 insertions(+), 33 deletions(-) Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6724 c046a42c-6fe2-441c-8c8c-71466251a162
2009-03-06 21:27:28 +01:00
/*
* QEMU VNC display driver: SASL auth protocol
*
* Copyright (C) 2009 Red Hat, Inc
*
* Permission is hereby granted, free of charge, to any person obtaining a copy
* of this software and associated documentation files (the "Software"), to deal
* in the Software without restriction, including without limitation the rights
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
* copies of the Software, and to permit persons to whom the Software is
* furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in
* all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
* THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
* THE SOFTWARE.
*/
#include "vnc.h"
/* Max amount of data we send/recv for SASL steps to prevent DOS */
#define SASL_DATA_MAX_LEN (1024 * 1024)
void vnc_sasl_client_cleanup(VncState *vs)
{
if (vs->sasl.conn) {
vs->sasl.runSSF = false;
vs->sasl.wantSSF = false;
vs->sasl.waitWriteSSF = 0;
vs->sasl.encodedLength = vs->sasl.encodedOffset = 0;
vs->sasl.encoded = NULL;
g_free(vs->sasl.username);
g_free(vs->sasl.mechlist);
vs->sasl.username = vs->sasl.mechlist = NULL;
sasl_dispose(&vs->sasl.conn);
vs->sasl.conn = NULL;
Add SASL authentication support ("Daniel P. Berrange") This patch adds the new SASL authentication protocol to the VNC server. It is enabled by setting the 'sasl' flag when launching VNC. SASL can optionally provide encryption via its SSF layer, if a suitable mechanism is configured (eg, GSSAPI/Kerberos, or Digest-MD5). If an SSF layer is not available, then it should be combined with the x509 VNC authentication protocol which provides encryption. eg, if using GSSAPI qemu -vnc localhost:1,sasl eg if using TLS/x509 for encryption qemu -vnc localhost:1,sasl,tls,x509 By default the Cyrus SASL library will look for its configuration in the file /etc/sasl2/qemu.conf. For non-root users, this can be overridden by setting the SASL_CONF_PATH environment variable, eg to make it look in $HOME/.sasl2. NB unprivileged users may not have access to the full range of SASL mechanisms, since some of them require some administrative privileges to configure. The patch includes an example SASL configuration file which illustrates config for GSSAPI and Digest-MD5, though it should be noted that the latter is not really considered secure any more. Most of the SASL authentication code is located in a separate source file, vnc-auth-sasl.c. The main vnc.c file only contains minimal integration glue, specifically parsing of command line flags / setup, and calls to start the SASL auth process, to do encoding/decoding for data. There are several possible stacks for reading & writing of data, depending on the combo of VNC authentication methods in use - Clear. read/write straight to socket - TLS. read/write via GNUTLS helpers - SASL. encode/decode via SASL SSF layer, then read/write to socket - SASL+TLS. encode/decode via SASL SSF layer, then read/write via GNUTLS Hence, the vnc_client_read & vnc_client_write methods have been refactored a little. vnc_client_read: main entry point for reading, calls either - vnc_client_read_plain reading, with no intermediate decoding - vnc_client_read_sasl reading, with SASL SSF decoding These two methods, then call vnc_client_read_buf(). This decides whether to write to the socket directly or write via GNUTLS. The situation is the same for writing data. More extensive comments have been added in the code / patch. The vnc_client_read_sasl and vnc_client_write_sasl method implementations live in the separate vnc-auth-sasl.c file. The state required for the SASL auth mechanism is kept in a separate VncStateSASL struct, defined in vnc-auth-sasl.h and included in the main VncState. The configure script probes for SASL and automatically enables it if found, unless --disable-vnc-sasl was given to override it. Makefile | 7 Makefile.target | 5 b/qemu.sasl | 34 ++ b/vnc-auth-sasl.c | 626 ++++++++++++++++++++++++++++++++++++++++++++++++++++ b/vnc-auth-sasl.h | 67 +++++ configure | 34 ++ qemu-doc.texi | 97 ++++++++ vnc-auth-vencrypt.c | 12 vnc.c | 249 ++++++++++++++++++-- vnc.h | 31 ++ 10 files changed, 1129 insertions(+), 33 deletions(-) Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6724 c046a42c-6fe2-441c-8c8c-71466251a162
2009-03-06 21:27:28 +01:00
}
}
long vnc_client_write_sasl(VncState *vs)
{
long ret;
VNC_DEBUG("Write SASL: Pending output %p size %zd offset %zd "
"Encoded: %p size %d offset %d\n",
vs->output.buffer, vs->output.capacity, vs->output.offset,
vs->sasl.encoded, vs->sasl.encodedLength, vs->sasl.encodedOffset);
Add SASL authentication support ("Daniel P. Berrange") This patch adds the new SASL authentication protocol to the VNC server. It is enabled by setting the 'sasl' flag when launching VNC. SASL can optionally provide encryption via its SSF layer, if a suitable mechanism is configured (eg, GSSAPI/Kerberos, or Digest-MD5). If an SSF layer is not available, then it should be combined with the x509 VNC authentication protocol which provides encryption. eg, if using GSSAPI qemu -vnc localhost:1,sasl eg if using TLS/x509 for encryption qemu -vnc localhost:1,sasl,tls,x509 By default the Cyrus SASL library will look for its configuration in the file /etc/sasl2/qemu.conf. For non-root users, this can be overridden by setting the SASL_CONF_PATH environment variable, eg to make it look in $HOME/.sasl2. NB unprivileged users may not have access to the full range of SASL mechanisms, since some of them require some administrative privileges to configure. The patch includes an example SASL configuration file which illustrates config for GSSAPI and Digest-MD5, though it should be noted that the latter is not really considered secure any more. Most of the SASL authentication code is located in a separate source file, vnc-auth-sasl.c. The main vnc.c file only contains minimal integration glue, specifically parsing of command line flags / setup, and calls to start the SASL auth process, to do encoding/decoding for data. There are several possible stacks for reading & writing of data, depending on the combo of VNC authentication methods in use - Clear. read/write straight to socket - TLS. read/write via GNUTLS helpers - SASL. encode/decode via SASL SSF layer, then read/write to socket - SASL+TLS. encode/decode via SASL SSF layer, then read/write via GNUTLS Hence, the vnc_client_read & vnc_client_write methods have been refactored a little. vnc_client_read: main entry point for reading, calls either - vnc_client_read_plain reading, with no intermediate decoding - vnc_client_read_sasl reading, with SASL SSF decoding These two methods, then call vnc_client_read_buf(). This decides whether to write to the socket directly or write via GNUTLS. The situation is the same for writing data. More extensive comments have been added in the code / patch. The vnc_client_read_sasl and vnc_client_write_sasl method implementations live in the separate vnc-auth-sasl.c file. The state required for the SASL auth mechanism is kept in a separate VncStateSASL struct, defined in vnc-auth-sasl.h and included in the main VncState. The configure script probes for SASL and automatically enables it if found, unless --disable-vnc-sasl was given to override it. Makefile | 7 Makefile.target | 5 b/qemu.sasl | 34 ++ b/vnc-auth-sasl.c | 626 ++++++++++++++++++++++++++++++++++++++++++++++++++++ b/vnc-auth-sasl.h | 67 +++++ configure | 34 ++ qemu-doc.texi | 97 ++++++++ vnc-auth-vencrypt.c | 12 vnc.c | 249 ++++++++++++++++++-- vnc.h | 31 ++ 10 files changed, 1129 insertions(+), 33 deletions(-) Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6724 c046a42c-6fe2-441c-8c8c-71466251a162
2009-03-06 21:27:28 +01:00
if (!vs->sasl.encoded) {
int err;
err = sasl_encode(vs->sasl.conn,
(char *)vs->output.buffer,
vs->output.offset,
(const char **)&vs->sasl.encoded,
&vs->sasl.encodedLength);
if (err != SASL_OK)
return vnc_client_io_error(vs, -1, EIO);
vs->sasl.encodedOffset = 0;
Add SASL authentication support ("Daniel P. Berrange") This patch adds the new SASL authentication protocol to the VNC server. It is enabled by setting the 'sasl' flag when launching VNC. SASL can optionally provide encryption via its SSF layer, if a suitable mechanism is configured (eg, GSSAPI/Kerberos, or Digest-MD5). If an SSF layer is not available, then it should be combined with the x509 VNC authentication protocol which provides encryption. eg, if using GSSAPI qemu -vnc localhost:1,sasl eg if using TLS/x509 for encryption qemu -vnc localhost:1,sasl,tls,x509 By default the Cyrus SASL library will look for its configuration in the file /etc/sasl2/qemu.conf. For non-root users, this can be overridden by setting the SASL_CONF_PATH environment variable, eg to make it look in $HOME/.sasl2. NB unprivileged users may not have access to the full range of SASL mechanisms, since some of them require some administrative privileges to configure. The patch includes an example SASL configuration file which illustrates config for GSSAPI and Digest-MD5, though it should be noted that the latter is not really considered secure any more. Most of the SASL authentication code is located in a separate source file, vnc-auth-sasl.c. The main vnc.c file only contains minimal integration glue, specifically parsing of command line flags / setup, and calls to start the SASL auth process, to do encoding/decoding for data. There are several possible stacks for reading & writing of data, depending on the combo of VNC authentication methods in use - Clear. read/write straight to socket - TLS. read/write via GNUTLS helpers - SASL. encode/decode via SASL SSF layer, then read/write to socket - SASL+TLS. encode/decode via SASL SSF layer, then read/write via GNUTLS Hence, the vnc_client_read & vnc_client_write methods have been refactored a little. vnc_client_read: main entry point for reading, calls either - vnc_client_read_plain reading, with no intermediate decoding - vnc_client_read_sasl reading, with SASL SSF decoding These two methods, then call vnc_client_read_buf(). This decides whether to write to the socket directly or write via GNUTLS. The situation is the same for writing data. More extensive comments have been added in the code / patch. The vnc_client_read_sasl and vnc_client_write_sasl method implementations live in the separate vnc-auth-sasl.c file. The state required for the SASL auth mechanism is kept in a separate VncStateSASL struct, defined in vnc-auth-sasl.h and included in the main VncState. The configure script probes for SASL and automatically enables it if found, unless --disable-vnc-sasl was given to override it. Makefile | 7 Makefile.target | 5 b/qemu.sasl | 34 ++ b/vnc-auth-sasl.c | 626 ++++++++++++++++++++++++++++++++++++++++++++++++++++ b/vnc-auth-sasl.h | 67 +++++ configure | 34 ++ qemu-doc.texi | 97 ++++++++ vnc-auth-vencrypt.c | 12 vnc.c | 249 ++++++++++++++++++-- vnc.h | 31 ++ 10 files changed, 1129 insertions(+), 33 deletions(-) Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6724 c046a42c-6fe2-441c-8c8c-71466251a162
2009-03-06 21:27:28 +01:00
}
ret = vnc_client_write_buf(vs,
vs->sasl.encoded + vs->sasl.encodedOffset,
vs->sasl.encodedLength - vs->sasl.encodedOffset);
Add SASL authentication support ("Daniel P. Berrange") This patch adds the new SASL authentication protocol to the VNC server. It is enabled by setting the 'sasl' flag when launching VNC. SASL can optionally provide encryption via its SSF layer, if a suitable mechanism is configured (eg, GSSAPI/Kerberos, or Digest-MD5). If an SSF layer is not available, then it should be combined with the x509 VNC authentication protocol which provides encryption. eg, if using GSSAPI qemu -vnc localhost:1,sasl eg if using TLS/x509 for encryption qemu -vnc localhost:1,sasl,tls,x509 By default the Cyrus SASL library will look for its configuration in the file /etc/sasl2/qemu.conf. For non-root users, this can be overridden by setting the SASL_CONF_PATH environment variable, eg to make it look in $HOME/.sasl2. NB unprivileged users may not have access to the full range of SASL mechanisms, since some of them require some administrative privileges to configure. The patch includes an example SASL configuration file which illustrates config for GSSAPI and Digest-MD5, though it should be noted that the latter is not really considered secure any more. Most of the SASL authentication code is located in a separate source file, vnc-auth-sasl.c. The main vnc.c file only contains minimal integration glue, specifically parsing of command line flags / setup, and calls to start the SASL auth process, to do encoding/decoding for data. There are several possible stacks for reading & writing of data, depending on the combo of VNC authentication methods in use - Clear. read/write straight to socket - TLS. read/write via GNUTLS helpers - SASL. encode/decode via SASL SSF layer, then read/write to socket - SASL+TLS. encode/decode via SASL SSF layer, then read/write via GNUTLS Hence, the vnc_client_read & vnc_client_write methods have been refactored a little. vnc_client_read: main entry point for reading, calls either - vnc_client_read_plain reading, with no intermediate decoding - vnc_client_read_sasl reading, with SASL SSF decoding These two methods, then call vnc_client_read_buf(). This decides whether to write to the socket directly or write via GNUTLS. The situation is the same for writing data. More extensive comments have been added in the code / patch. The vnc_client_read_sasl and vnc_client_write_sasl method implementations live in the separate vnc-auth-sasl.c file. The state required for the SASL auth mechanism is kept in a separate VncStateSASL struct, defined in vnc-auth-sasl.h and included in the main VncState. The configure script probes for SASL and automatically enables it if found, unless --disable-vnc-sasl was given to override it. Makefile | 7 Makefile.target | 5 b/qemu.sasl | 34 ++ b/vnc-auth-sasl.c | 626 ++++++++++++++++++++++++++++++++++++++++++++++++++++ b/vnc-auth-sasl.h | 67 +++++ configure | 34 ++ qemu-doc.texi | 97 ++++++++ vnc-auth-vencrypt.c | 12 vnc.c | 249 ++++++++++++++++++-- vnc.h | 31 ++ 10 files changed, 1129 insertions(+), 33 deletions(-) Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6724 c046a42c-6fe2-441c-8c8c-71466251a162
2009-03-06 21:27:28 +01:00
if (!ret)
return 0;
Add SASL authentication support ("Daniel P. Berrange") This patch adds the new SASL authentication protocol to the VNC server. It is enabled by setting the 'sasl' flag when launching VNC. SASL can optionally provide encryption via its SSF layer, if a suitable mechanism is configured (eg, GSSAPI/Kerberos, or Digest-MD5). If an SSF layer is not available, then it should be combined with the x509 VNC authentication protocol which provides encryption. eg, if using GSSAPI qemu -vnc localhost:1,sasl eg if using TLS/x509 for encryption qemu -vnc localhost:1,sasl,tls,x509 By default the Cyrus SASL library will look for its configuration in the file /etc/sasl2/qemu.conf. For non-root users, this can be overridden by setting the SASL_CONF_PATH environment variable, eg to make it look in $HOME/.sasl2. NB unprivileged users may not have access to the full range of SASL mechanisms, since some of them require some administrative privileges to configure. The patch includes an example SASL configuration file which illustrates config for GSSAPI and Digest-MD5, though it should be noted that the latter is not really considered secure any more. Most of the SASL authentication code is located in a separate source file, vnc-auth-sasl.c. The main vnc.c file only contains minimal integration glue, specifically parsing of command line flags / setup, and calls to start the SASL auth process, to do encoding/decoding for data. There are several possible stacks for reading & writing of data, depending on the combo of VNC authentication methods in use - Clear. read/write straight to socket - TLS. read/write via GNUTLS helpers - SASL. encode/decode via SASL SSF layer, then read/write to socket - SASL+TLS. encode/decode via SASL SSF layer, then read/write via GNUTLS Hence, the vnc_client_read & vnc_client_write methods have been refactored a little. vnc_client_read: main entry point for reading, calls either - vnc_client_read_plain reading, with no intermediate decoding - vnc_client_read_sasl reading, with SASL SSF decoding These two methods, then call vnc_client_read_buf(). This decides whether to write to the socket directly or write via GNUTLS. The situation is the same for writing data. More extensive comments have been added in the code / patch. The vnc_client_read_sasl and vnc_client_write_sasl method implementations live in the separate vnc-auth-sasl.c file. The state required for the SASL auth mechanism is kept in a separate VncStateSASL struct, defined in vnc-auth-sasl.h and included in the main VncState. The configure script probes for SASL and automatically enables it if found, unless --disable-vnc-sasl was given to override it. Makefile | 7 Makefile.target | 5 b/qemu.sasl | 34 ++ b/vnc-auth-sasl.c | 626 ++++++++++++++++++++++++++++++++++++++++++++++++++++ b/vnc-auth-sasl.h | 67 +++++ configure | 34 ++ qemu-doc.texi | 97 ++++++++ vnc-auth-vencrypt.c | 12 vnc.c | 249 ++++++++++++++++++-- vnc.h | 31 ++ 10 files changed, 1129 insertions(+), 33 deletions(-) Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6724 c046a42c-6fe2-441c-8c8c-71466251a162
2009-03-06 21:27:28 +01:00
vs->sasl.encodedOffset += ret;
if (vs->sasl.encodedOffset == vs->sasl.encodedLength) {
vs->output.offset = 0;
vs->sasl.encoded = NULL;
vs->sasl.encodedOffset = vs->sasl.encodedLength = 0;
Add SASL authentication support ("Daniel P. Berrange") This patch adds the new SASL authentication protocol to the VNC server. It is enabled by setting the 'sasl' flag when launching VNC. SASL can optionally provide encryption via its SSF layer, if a suitable mechanism is configured (eg, GSSAPI/Kerberos, or Digest-MD5). If an SSF layer is not available, then it should be combined with the x509 VNC authentication protocol which provides encryption. eg, if using GSSAPI qemu -vnc localhost:1,sasl eg if using TLS/x509 for encryption qemu -vnc localhost:1,sasl,tls,x509 By default the Cyrus SASL library will look for its configuration in the file /etc/sasl2/qemu.conf. For non-root users, this can be overridden by setting the SASL_CONF_PATH environment variable, eg to make it look in $HOME/.sasl2. NB unprivileged users may not have access to the full range of SASL mechanisms, since some of them require some administrative privileges to configure. The patch includes an example SASL configuration file which illustrates config for GSSAPI and Digest-MD5, though it should be noted that the latter is not really considered secure any more. Most of the SASL authentication code is located in a separate source file, vnc-auth-sasl.c. The main vnc.c file only contains minimal integration glue, specifically parsing of command line flags / setup, and calls to start the SASL auth process, to do encoding/decoding for data. There are several possible stacks for reading & writing of data, depending on the combo of VNC authentication methods in use - Clear. read/write straight to socket - TLS. read/write via GNUTLS helpers - SASL. encode/decode via SASL SSF layer, then read/write to socket - SASL+TLS. encode/decode via SASL SSF layer, then read/write via GNUTLS Hence, the vnc_client_read & vnc_client_write methods have been refactored a little. vnc_client_read: main entry point for reading, calls either - vnc_client_read_plain reading, with no intermediate decoding - vnc_client_read_sasl reading, with SASL SSF decoding These two methods, then call vnc_client_read_buf(). This decides whether to write to the socket directly or write via GNUTLS. The situation is the same for writing data. More extensive comments have been added in the code / patch. The vnc_client_read_sasl and vnc_client_write_sasl method implementations live in the separate vnc-auth-sasl.c file. The state required for the SASL auth mechanism is kept in a separate VncStateSASL struct, defined in vnc-auth-sasl.h and included in the main VncState. The configure script probes for SASL and automatically enables it if found, unless --disable-vnc-sasl was given to override it. Makefile | 7 Makefile.target | 5 b/qemu.sasl | 34 ++ b/vnc-auth-sasl.c | 626 ++++++++++++++++++++++++++++++++++++++++++++++++++++ b/vnc-auth-sasl.h | 67 +++++ configure | 34 ++ qemu-doc.texi | 97 ++++++++ vnc-auth-vencrypt.c | 12 vnc.c | 249 ++++++++++++++++++-- vnc.h | 31 ++ 10 files changed, 1129 insertions(+), 33 deletions(-) Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6724 c046a42c-6fe2-441c-8c8c-71466251a162
2009-03-06 21:27:28 +01:00
}
/* Can't merge this block with one above, because
* someone might have written more unencrypted
* data in vs->output while we were processing
* SASL encoded output
*/
if (vs->output.offset == 0) {
qemu_set_fd_handler2(vs->csock, NULL, vnc_client_read, NULL, vs);
Add SASL authentication support ("Daniel P. Berrange") This patch adds the new SASL authentication protocol to the VNC server. It is enabled by setting the 'sasl' flag when launching VNC. SASL can optionally provide encryption via its SSF layer, if a suitable mechanism is configured (eg, GSSAPI/Kerberos, or Digest-MD5). If an SSF layer is not available, then it should be combined with the x509 VNC authentication protocol which provides encryption. eg, if using GSSAPI qemu -vnc localhost:1,sasl eg if using TLS/x509 for encryption qemu -vnc localhost:1,sasl,tls,x509 By default the Cyrus SASL library will look for its configuration in the file /etc/sasl2/qemu.conf. For non-root users, this can be overridden by setting the SASL_CONF_PATH environment variable, eg to make it look in $HOME/.sasl2. NB unprivileged users may not have access to the full range of SASL mechanisms, since some of them require some administrative privileges to configure. The patch includes an example SASL configuration file which illustrates config for GSSAPI and Digest-MD5, though it should be noted that the latter is not really considered secure any more. Most of the SASL authentication code is located in a separate source file, vnc-auth-sasl.c. The main vnc.c file only contains minimal integration glue, specifically parsing of command line flags / setup, and calls to start the SASL auth process, to do encoding/decoding for data. There are several possible stacks for reading & writing of data, depending on the combo of VNC authentication methods in use - Clear. read/write straight to socket - TLS. read/write via GNUTLS helpers - SASL. encode/decode via SASL SSF layer, then read/write to socket - SASL+TLS. encode/decode via SASL SSF layer, then read/write via GNUTLS Hence, the vnc_client_read & vnc_client_write methods have been refactored a little. vnc_client_read: main entry point for reading, calls either - vnc_client_read_plain reading, with no intermediate decoding - vnc_client_read_sasl reading, with SASL SSF decoding These two methods, then call vnc_client_read_buf(). This decides whether to write to the socket directly or write via GNUTLS. The situation is the same for writing data. More extensive comments have been added in the code / patch. The vnc_client_read_sasl and vnc_client_write_sasl method implementations live in the separate vnc-auth-sasl.c file. The state required for the SASL auth mechanism is kept in a separate VncStateSASL struct, defined in vnc-auth-sasl.h and included in the main VncState. The configure script probes for SASL and automatically enables it if found, unless --disable-vnc-sasl was given to override it. Makefile | 7 Makefile.target | 5 b/qemu.sasl | 34 ++ b/vnc-auth-sasl.c | 626 ++++++++++++++++++++++++++++++++++++++++++++++++++++ b/vnc-auth-sasl.h | 67 +++++ configure | 34 ++ qemu-doc.texi | 97 ++++++++ vnc-auth-vencrypt.c | 12 vnc.c | 249 ++++++++++++++++++-- vnc.h | 31 ++ 10 files changed, 1129 insertions(+), 33 deletions(-) Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6724 c046a42c-6fe2-441c-8c8c-71466251a162
2009-03-06 21:27:28 +01:00
}
return ret;
}
long vnc_client_read_sasl(VncState *vs)
{
long ret;
uint8_t encoded[4096];
const char *decoded;
unsigned int decodedLen;
int err;
ret = vnc_client_read_buf(vs, encoded, sizeof(encoded));
if (!ret)
return 0;
Add SASL authentication support ("Daniel P. Berrange") This patch adds the new SASL authentication protocol to the VNC server. It is enabled by setting the 'sasl' flag when launching VNC. SASL can optionally provide encryption via its SSF layer, if a suitable mechanism is configured (eg, GSSAPI/Kerberos, or Digest-MD5). If an SSF layer is not available, then it should be combined with the x509 VNC authentication protocol which provides encryption. eg, if using GSSAPI qemu -vnc localhost:1,sasl eg if using TLS/x509 for encryption qemu -vnc localhost:1,sasl,tls,x509 By default the Cyrus SASL library will look for its configuration in the file /etc/sasl2/qemu.conf. For non-root users, this can be overridden by setting the SASL_CONF_PATH environment variable, eg to make it look in $HOME/.sasl2. NB unprivileged users may not have access to the full range of SASL mechanisms, since some of them require some administrative privileges to configure. The patch includes an example SASL configuration file which illustrates config for GSSAPI and Digest-MD5, though it should be noted that the latter is not really considered secure any more. Most of the SASL authentication code is located in a separate source file, vnc-auth-sasl.c. The main vnc.c file only contains minimal integration glue, specifically parsing of command line flags / setup, and calls to start the SASL auth process, to do encoding/decoding for data. There are several possible stacks for reading & writing of data, depending on the combo of VNC authentication methods in use - Clear. read/write straight to socket - TLS. read/write via GNUTLS helpers - SASL. encode/decode via SASL SSF layer, then read/write to socket - SASL+TLS. encode/decode via SASL SSF layer, then read/write via GNUTLS Hence, the vnc_client_read & vnc_client_write methods have been refactored a little. vnc_client_read: main entry point for reading, calls either - vnc_client_read_plain reading, with no intermediate decoding - vnc_client_read_sasl reading, with SASL SSF decoding These two methods, then call vnc_client_read_buf(). This decides whether to write to the socket directly or write via GNUTLS. The situation is the same for writing data. More extensive comments have been added in the code / patch. The vnc_client_read_sasl and vnc_client_write_sasl method implementations live in the separate vnc-auth-sasl.c file. The state required for the SASL auth mechanism is kept in a separate VncStateSASL struct, defined in vnc-auth-sasl.h and included in the main VncState. The configure script probes for SASL and automatically enables it if found, unless --disable-vnc-sasl was given to override it. Makefile | 7 Makefile.target | 5 b/qemu.sasl | 34 ++ b/vnc-auth-sasl.c | 626 ++++++++++++++++++++++++++++++++++++++++++++++++++++ b/vnc-auth-sasl.h | 67 +++++ configure | 34 ++ qemu-doc.texi | 97 ++++++++ vnc-auth-vencrypt.c | 12 vnc.c | 249 ++++++++++++++++++-- vnc.h | 31 ++ 10 files changed, 1129 insertions(+), 33 deletions(-) Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6724 c046a42c-6fe2-441c-8c8c-71466251a162
2009-03-06 21:27:28 +01:00
err = sasl_decode(vs->sasl.conn,
(char *)encoded, ret,
&decoded, &decodedLen);
Add SASL authentication support ("Daniel P. Berrange") This patch adds the new SASL authentication protocol to the VNC server. It is enabled by setting the 'sasl' flag when launching VNC. SASL can optionally provide encryption via its SSF layer, if a suitable mechanism is configured (eg, GSSAPI/Kerberos, or Digest-MD5). If an SSF layer is not available, then it should be combined with the x509 VNC authentication protocol which provides encryption. eg, if using GSSAPI qemu -vnc localhost:1,sasl eg if using TLS/x509 for encryption qemu -vnc localhost:1,sasl,tls,x509 By default the Cyrus SASL library will look for its configuration in the file /etc/sasl2/qemu.conf. For non-root users, this can be overridden by setting the SASL_CONF_PATH environment variable, eg to make it look in $HOME/.sasl2. NB unprivileged users may not have access to the full range of SASL mechanisms, since some of them require some administrative privileges to configure. The patch includes an example SASL configuration file which illustrates config for GSSAPI and Digest-MD5, though it should be noted that the latter is not really considered secure any more. Most of the SASL authentication code is located in a separate source file, vnc-auth-sasl.c. The main vnc.c file only contains minimal integration glue, specifically parsing of command line flags / setup, and calls to start the SASL auth process, to do encoding/decoding for data. There are several possible stacks for reading & writing of data, depending on the combo of VNC authentication methods in use - Clear. read/write straight to socket - TLS. read/write via GNUTLS helpers - SASL. encode/decode via SASL SSF layer, then read/write to socket - SASL+TLS. encode/decode via SASL SSF layer, then read/write via GNUTLS Hence, the vnc_client_read & vnc_client_write methods have been refactored a little. vnc_client_read: main entry point for reading, calls either - vnc_client_read_plain reading, with no intermediate decoding - vnc_client_read_sasl reading, with SASL SSF decoding These two methods, then call vnc_client_read_buf(). This decides whether to write to the socket directly or write via GNUTLS. The situation is the same for writing data. More extensive comments have been added in the code / patch. The vnc_client_read_sasl and vnc_client_write_sasl method implementations live in the separate vnc-auth-sasl.c file. The state required for the SASL auth mechanism is kept in a separate VncStateSASL struct, defined in vnc-auth-sasl.h and included in the main VncState. The configure script probes for SASL and automatically enables it if found, unless --disable-vnc-sasl was given to override it. Makefile | 7 Makefile.target | 5 b/qemu.sasl | 34 ++ b/vnc-auth-sasl.c | 626 ++++++++++++++++++++++++++++++++++++++++++++++++++++ b/vnc-auth-sasl.h | 67 +++++ configure | 34 ++ qemu-doc.texi | 97 ++++++++ vnc-auth-vencrypt.c | 12 vnc.c | 249 ++++++++++++++++++-- vnc.h | 31 ++ 10 files changed, 1129 insertions(+), 33 deletions(-) Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6724 c046a42c-6fe2-441c-8c8c-71466251a162
2009-03-06 21:27:28 +01:00
if (err != SASL_OK)
return vnc_client_io_error(vs, -1, -EIO);
Add SASL authentication support ("Daniel P. Berrange") This patch adds the new SASL authentication protocol to the VNC server. It is enabled by setting the 'sasl' flag when launching VNC. SASL can optionally provide encryption via its SSF layer, if a suitable mechanism is configured (eg, GSSAPI/Kerberos, or Digest-MD5). If an SSF layer is not available, then it should be combined with the x509 VNC authentication protocol which provides encryption. eg, if using GSSAPI qemu -vnc localhost:1,sasl eg if using TLS/x509 for encryption qemu -vnc localhost:1,sasl,tls,x509 By default the Cyrus SASL library will look for its configuration in the file /etc/sasl2/qemu.conf. For non-root users, this can be overridden by setting the SASL_CONF_PATH environment variable, eg to make it look in $HOME/.sasl2. NB unprivileged users may not have access to the full range of SASL mechanisms, since some of them require some administrative privileges to configure. The patch includes an example SASL configuration file which illustrates config for GSSAPI and Digest-MD5, though it should be noted that the latter is not really considered secure any more. Most of the SASL authentication code is located in a separate source file, vnc-auth-sasl.c. The main vnc.c file only contains minimal integration glue, specifically parsing of command line flags / setup, and calls to start the SASL auth process, to do encoding/decoding for data. There are several possible stacks for reading & writing of data, depending on the combo of VNC authentication methods in use - Clear. read/write straight to socket - TLS. read/write via GNUTLS helpers - SASL. encode/decode via SASL SSF layer, then read/write to socket - SASL+TLS. encode/decode via SASL SSF layer, then read/write via GNUTLS Hence, the vnc_client_read & vnc_client_write methods have been refactored a little. vnc_client_read: main entry point for reading, calls either - vnc_client_read_plain reading, with no intermediate decoding - vnc_client_read_sasl reading, with SASL SSF decoding These two methods, then call vnc_client_read_buf(). This decides whether to write to the socket directly or write via GNUTLS. The situation is the same for writing data. More extensive comments have been added in the code / patch. The vnc_client_read_sasl and vnc_client_write_sasl method implementations live in the separate vnc-auth-sasl.c file. The state required for the SASL auth mechanism is kept in a separate VncStateSASL struct, defined in vnc-auth-sasl.h and included in the main VncState. The configure script probes for SASL and automatically enables it if found, unless --disable-vnc-sasl was given to override it. Makefile | 7 Makefile.target | 5 b/qemu.sasl | 34 ++ b/vnc-auth-sasl.c | 626 ++++++++++++++++++++++++++++++++++++++++++++++++++++ b/vnc-auth-sasl.h | 67 +++++ configure | 34 ++ qemu-doc.texi | 97 ++++++++ vnc-auth-vencrypt.c | 12 vnc.c | 249 ++++++++++++++++++-- vnc.h | 31 ++ 10 files changed, 1129 insertions(+), 33 deletions(-) Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6724 c046a42c-6fe2-441c-8c8c-71466251a162
2009-03-06 21:27:28 +01:00
VNC_DEBUG("Read SASL Encoded %p size %ld Decoded %p size %d\n",
encoded, ret, decoded, decodedLen);
Add SASL authentication support ("Daniel P. Berrange") This patch adds the new SASL authentication protocol to the VNC server. It is enabled by setting the 'sasl' flag when launching VNC. SASL can optionally provide encryption via its SSF layer, if a suitable mechanism is configured (eg, GSSAPI/Kerberos, or Digest-MD5). If an SSF layer is not available, then it should be combined with the x509 VNC authentication protocol which provides encryption. eg, if using GSSAPI qemu -vnc localhost:1,sasl eg if using TLS/x509 for encryption qemu -vnc localhost:1,sasl,tls,x509 By default the Cyrus SASL library will look for its configuration in the file /etc/sasl2/qemu.conf. For non-root users, this can be overridden by setting the SASL_CONF_PATH environment variable, eg to make it look in $HOME/.sasl2. NB unprivileged users may not have access to the full range of SASL mechanisms, since some of them require some administrative privileges to configure. The patch includes an example SASL configuration file which illustrates config for GSSAPI and Digest-MD5, though it should be noted that the latter is not really considered secure any more. Most of the SASL authentication code is located in a separate source file, vnc-auth-sasl.c. The main vnc.c file only contains minimal integration glue, specifically parsing of command line flags / setup, and calls to start the SASL auth process, to do encoding/decoding for data. There are several possible stacks for reading & writing of data, depending on the combo of VNC authentication methods in use - Clear. read/write straight to socket - TLS. read/write via GNUTLS helpers - SASL. encode/decode via SASL SSF layer, then read/write to socket - SASL+TLS. encode/decode via SASL SSF layer, then read/write via GNUTLS Hence, the vnc_client_read & vnc_client_write methods have been refactored a little. vnc_client_read: main entry point for reading, calls either - vnc_client_read_plain reading, with no intermediate decoding - vnc_client_read_sasl reading, with SASL SSF decoding These two methods, then call vnc_client_read_buf(). This decides whether to write to the socket directly or write via GNUTLS. The situation is the same for writing data. More extensive comments have been added in the code / patch. The vnc_client_read_sasl and vnc_client_write_sasl method implementations live in the separate vnc-auth-sasl.c file. The state required for the SASL auth mechanism is kept in a separate VncStateSASL struct, defined in vnc-auth-sasl.h and included in the main VncState. The configure script probes for SASL and automatically enables it if found, unless --disable-vnc-sasl was given to override it. Makefile | 7 Makefile.target | 5 b/qemu.sasl | 34 ++ b/vnc-auth-sasl.c | 626 ++++++++++++++++++++++++++++++++++++++++++++++++++++ b/vnc-auth-sasl.h | 67 +++++ configure | 34 ++ qemu-doc.texi | 97 ++++++++ vnc-auth-vencrypt.c | 12 vnc.c | 249 ++++++++++++++++++-- vnc.h | 31 ++ 10 files changed, 1129 insertions(+), 33 deletions(-) Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6724 c046a42c-6fe2-441c-8c8c-71466251a162
2009-03-06 21:27:28 +01:00
buffer_reserve(&vs->input, decodedLen);
buffer_append(&vs->input, decoded, decodedLen);
return decodedLen;
}
static int vnc_auth_sasl_check_access(VncState *vs)
{
const void *val;
int err;
Support ACLs for controlling VNC access ("Daniel P. Berrange") This patch introduces a generic internal API for access control lists to be used by network servers in QEMU. It adds support for checking these ACL in the VNC server, in two places. The first ACL is for the SASL authentication mechanism, checking the SASL username. This ACL is called 'vnc.username'. The second is for the TLS authentication mechanism, when x509 client certificates are turned on, checking against the Distinguished Name of the client. This ACL is called 'vnc.x509dname' The internal API provides for an ACL with the following characteristics - A unique name, eg vnc.username, and vnc.x509dname. - A default policy, allow or deny - An ordered series of match rules, with allow or deny policy If none of the match rules apply, then the default policy is used. There is a monitor API to manipulate the ACLs, which I'll describe via examples (qemu) acl show vnc.username policy: allow (qemu) acl policy vnc.username denya acl: policy set to 'deny' (qemu) acl allow vnc.username fred acl: added rule at position 1 (qemu) acl allow vnc.username bob acl: added rule at position 2 (qemu) acl allow vnc.username joe 1 acl: added rule at position 1 (qemu) acl show vnc.username policy: deny 0: allow fred 1: allow joe 2: allow bob (qemu) acl show vnc.x509dname policy: allow (qemu) acl policy vnc.x509dname deny acl: policy set to 'deny' (qemu) acl allow vnc.x509dname C=GB,O=ACME,L=London,CN=* acl: added rule at position 1 (qemu) acl allow vnc.x509dname C=GB,O=ACME,L=Boston,CN=bob acl: added rule at position 2 (qemu) acl show vnc.x509dname policy: deny 0: allow C=GB,O=ACME,L=London,CN=* 1: allow C=GB,O=ACME,L=Boston,CN=bob By default the VNC server will not use any ACLs, allowing access to the server if the user successfully authenticates. To enable use of ACLs to restrict user access, the ',acl' flag should be given when starting QEMU. The initial ACL activated will be a 'deny all' policy and should be customized using monitor commands. eg enable SASL auth and ACLs qemu .... -vnc localhost:1,sasl,acl The next patch will provide a way to load a pre-defined ACL when starting up Makefile | 6 + b/acl.c | 185 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++ b/acl.h | 74 ++++++++++++++++++++++ configure | 18 +++++ monitor.c | 95 ++++++++++++++++++++++++++++ qemu-doc.texi | 49 ++++++++++++++ vnc-auth-sasl.c | 16 +++- vnc-auth-sasl.h | 7 ++ vnc-tls.c | 19 +++++ vnc-tls.h | 3 vnc.c | 21 ++++++ vnc.h | 3 12 files changed, 491 insertions(+), 5 deletions(-) Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6726 c046a42c-6fe2-441c-8c8c-71466251a162
2009-03-06 21:27:37 +01:00
int allow;
Add SASL authentication support ("Daniel P. Berrange") This patch adds the new SASL authentication protocol to the VNC server. It is enabled by setting the 'sasl' flag when launching VNC. SASL can optionally provide encryption via its SSF layer, if a suitable mechanism is configured (eg, GSSAPI/Kerberos, or Digest-MD5). If an SSF layer is not available, then it should be combined with the x509 VNC authentication protocol which provides encryption. eg, if using GSSAPI qemu -vnc localhost:1,sasl eg if using TLS/x509 for encryption qemu -vnc localhost:1,sasl,tls,x509 By default the Cyrus SASL library will look for its configuration in the file /etc/sasl2/qemu.conf. For non-root users, this can be overridden by setting the SASL_CONF_PATH environment variable, eg to make it look in $HOME/.sasl2. NB unprivileged users may not have access to the full range of SASL mechanisms, since some of them require some administrative privileges to configure. The patch includes an example SASL configuration file which illustrates config for GSSAPI and Digest-MD5, though it should be noted that the latter is not really considered secure any more. Most of the SASL authentication code is located in a separate source file, vnc-auth-sasl.c. The main vnc.c file only contains minimal integration glue, specifically parsing of command line flags / setup, and calls to start the SASL auth process, to do encoding/decoding for data. There are several possible stacks for reading & writing of data, depending on the combo of VNC authentication methods in use - Clear. read/write straight to socket - TLS. read/write via GNUTLS helpers - SASL. encode/decode via SASL SSF layer, then read/write to socket - SASL+TLS. encode/decode via SASL SSF layer, then read/write via GNUTLS Hence, the vnc_client_read & vnc_client_write methods have been refactored a little. vnc_client_read: main entry point for reading, calls either - vnc_client_read_plain reading, with no intermediate decoding - vnc_client_read_sasl reading, with SASL SSF decoding These two methods, then call vnc_client_read_buf(). This decides whether to write to the socket directly or write via GNUTLS. The situation is the same for writing data. More extensive comments have been added in the code / patch. The vnc_client_read_sasl and vnc_client_write_sasl method implementations live in the separate vnc-auth-sasl.c file. The state required for the SASL auth mechanism is kept in a separate VncStateSASL struct, defined in vnc-auth-sasl.h and included in the main VncState. The configure script probes for SASL and automatically enables it if found, unless --disable-vnc-sasl was given to override it. Makefile | 7 Makefile.target | 5 b/qemu.sasl | 34 ++ b/vnc-auth-sasl.c | 626 ++++++++++++++++++++++++++++++++++++++++++++++++++++ b/vnc-auth-sasl.h | 67 +++++ configure | 34 ++ qemu-doc.texi | 97 ++++++++ vnc-auth-vencrypt.c | 12 vnc.c | 249 ++++++++++++++++++-- vnc.h | 31 ++ 10 files changed, 1129 insertions(+), 33 deletions(-) Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6724 c046a42c-6fe2-441c-8c8c-71466251a162
2009-03-06 21:27:28 +01:00
err = sasl_getprop(vs->sasl.conn, SASL_USERNAME, &val);
if (err != SASL_OK) {
VNC_DEBUG("cannot query SASL username on connection %d (%s), denying access\n",
err, sasl_errstring(err, NULL, NULL));
return -1;
Add SASL authentication support ("Daniel P. Berrange") This patch adds the new SASL authentication protocol to the VNC server. It is enabled by setting the 'sasl' flag when launching VNC. SASL can optionally provide encryption via its SSF layer, if a suitable mechanism is configured (eg, GSSAPI/Kerberos, or Digest-MD5). If an SSF layer is not available, then it should be combined with the x509 VNC authentication protocol which provides encryption. eg, if using GSSAPI qemu -vnc localhost:1,sasl eg if using TLS/x509 for encryption qemu -vnc localhost:1,sasl,tls,x509 By default the Cyrus SASL library will look for its configuration in the file /etc/sasl2/qemu.conf. For non-root users, this can be overridden by setting the SASL_CONF_PATH environment variable, eg to make it look in $HOME/.sasl2. NB unprivileged users may not have access to the full range of SASL mechanisms, since some of them require some administrative privileges to configure. The patch includes an example SASL configuration file which illustrates config for GSSAPI and Digest-MD5, though it should be noted that the latter is not really considered secure any more. Most of the SASL authentication code is located in a separate source file, vnc-auth-sasl.c. The main vnc.c file only contains minimal integration glue, specifically parsing of command line flags / setup, and calls to start the SASL auth process, to do encoding/decoding for data. There are several possible stacks for reading & writing of data, depending on the combo of VNC authentication methods in use - Clear. read/write straight to socket - TLS. read/write via GNUTLS helpers - SASL. encode/decode via SASL SSF layer, then read/write to socket - SASL+TLS. encode/decode via SASL SSF layer, then read/write via GNUTLS Hence, the vnc_client_read & vnc_client_write methods have been refactored a little. vnc_client_read: main entry point for reading, calls either - vnc_client_read_plain reading, with no intermediate decoding - vnc_client_read_sasl reading, with SASL SSF decoding These two methods, then call vnc_client_read_buf(). This decides whether to write to the socket directly or write via GNUTLS. The situation is the same for writing data. More extensive comments have been added in the code / patch. The vnc_client_read_sasl and vnc_client_write_sasl method implementations live in the separate vnc-auth-sasl.c file. The state required for the SASL auth mechanism is kept in a separate VncStateSASL struct, defined in vnc-auth-sasl.h and included in the main VncState. The configure script probes for SASL and automatically enables it if found, unless --disable-vnc-sasl was given to override it. Makefile | 7 Makefile.target | 5 b/qemu.sasl | 34 ++ b/vnc-auth-sasl.c | 626 ++++++++++++++++++++++++++++++++++++++++++++++++++++ b/vnc-auth-sasl.h | 67 +++++ configure | 34 ++ qemu-doc.texi | 97 ++++++++ vnc-auth-vencrypt.c | 12 vnc.c | 249 ++++++++++++++++++-- vnc.h | 31 ++ 10 files changed, 1129 insertions(+), 33 deletions(-) Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6724 c046a42c-6fe2-441c-8c8c-71466251a162
2009-03-06 21:27:28 +01:00
}
if (val == NULL) {
VNC_DEBUG("no client username was found, denying access\n");
return -1;
Add SASL authentication support ("Daniel P. Berrange") This patch adds the new SASL authentication protocol to the VNC server. It is enabled by setting the 'sasl' flag when launching VNC. SASL can optionally provide encryption via its SSF layer, if a suitable mechanism is configured (eg, GSSAPI/Kerberos, or Digest-MD5). If an SSF layer is not available, then it should be combined with the x509 VNC authentication protocol which provides encryption. eg, if using GSSAPI qemu -vnc localhost:1,sasl eg if using TLS/x509 for encryption qemu -vnc localhost:1,sasl,tls,x509 By default the Cyrus SASL library will look for its configuration in the file /etc/sasl2/qemu.conf. For non-root users, this can be overridden by setting the SASL_CONF_PATH environment variable, eg to make it look in $HOME/.sasl2. NB unprivileged users may not have access to the full range of SASL mechanisms, since some of them require some administrative privileges to configure. The patch includes an example SASL configuration file which illustrates config for GSSAPI and Digest-MD5, though it should be noted that the latter is not really considered secure any more. Most of the SASL authentication code is located in a separate source file, vnc-auth-sasl.c. The main vnc.c file only contains minimal integration glue, specifically parsing of command line flags / setup, and calls to start the SASL auth process, to do encoding/decoding for data. There are several possible stacks for reading & writing of data, depending on the combo of VNC authentication methods in use - Clear. read/write straight to socket - TLS. read/write via GNUTLS helpers - SASL. encode/decode via SASL SSF layer, then read/write to socket - SASL+TLS. encode/decode via SASL SSF layer, then read/write via GNUTLS Hence, the vnc_client_read & vnc_client_write methods have been refactored a little. vnc_client_read: main entry point for reading, calls either - vnc_client_read_plain reading, with no intermediate decoding - vnc_client_read_sasl reading, with SASL SSF decoding These two methods, then call vnc_client_read_buf(). This decides whether to write to the socket directly or write via GNUTLS. The situation is the same for writing data. More extensive comments have been added in the code / patch. The vnc_client_read_sasl and vnc_client_write_sasl method implementations live in the separate vnc-auth-sasl.c file. The state required for the SASL auth mechanism is kept in a separate VncStateSASL struct, defined in vnc-auth-sasl.h and included in the main VncState. The configure script probes for SASL and automatically enables it if found, unless --disable-vnc-sasl was given to override it. Makefile | 7 Makefile.target | 5 b/qemu.sasl | 34 ++ b/vnc-auth-sasl.c | 626 ++++++++++++++++++++++++++++++++++++++++++++++++++++ b/vnc-auth-sasl.h | 67 +++++ configure | 34 ++ qemu-doc.texi | 97 ++++++++ vnc-auth-vencrypt.c | 12 vnc.c | 249 ++++++++++++++++++-- vnc.h | 31 ++ 10 files changed, 1129 insertions(+), 33 deletions(-) Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6724 c046a42c-6fe2-441c-8c8c-71466251a162
2009-03-06 21:27:28 +01:00
}
VNC_DEBUG("SASL client username %s\n", (const char *)val);
vs->sasl.username = g_strdup((const char*)val);
Add SASL authentication support ("Daniel P. Berrange") This patch adds the new SASL authentication protocol to the VNC server. It is enabled by setting the 'sasl' flag when launching VNC. SASL can optionally provide encryption via its SSF layer, if a suitable mechanism is configured (eg, GSSAPI/Kerberos, or Digest-MD5). If an SSF layer is not available, then it should be combined with the x509 VNC authentication protocol which provides encryption. eg, if using GSSAPI qemu -vnc localhost:1,sasl eg if using TLS/x509 for encryption qemu -vnc localhost:1,sasl,tls,x509 By default the Cyrus SASL library will look for its configuration in the file /etc/sasl2/qemu.conf. For non-root users, this can be overridden by setting the SASL_CONF_PATH environment variable, eg to make it look in $HOME/.sasl2. NB unprivileged users may not have access to the full range of SASL mechanisms, since some of them require some administrative privileges to configure. The patch includes an example SASL configuration file which illustrates config for GSSAPI and Digest-MD5, though it should be noted that the latter is not really considered secure any more. Most of the SASL authentication code is located in a separate source file, vnc-auth-sasl.c. The main vnc.c file only contains minimal integration glue, specifically parsing of command line flags / setup, and calls to start the SASL auth process, to do encoding/decoding for data. There are several possible stacks for reading & writing of data, depending on the combo of VNC authentication methods in use - Clear. read/write straight to socket - TLS. read/write via GNUTLS helpers - SASL. encode/decode via SASL SSF layer, then read/write to socket - SASL+TLS. encode/decode via SASL SSF layer, then read/write via GNUTLS Hence, the vnc_client_read & vnc_client_write methods have been refactored a little. vnc_client_read: main entry point for reading, calls either - vnc_client_read_plain reading, with no intermediate decoding - vnc_client_read_sasl reading, with SASL SSF decoding These two methods, then call vnc_client_read_buf(). This decides whether to write to the socket directly or write via GNUTLS. The situation is the same for writing data. More extensive comments have been added in the code / patch. The vnc_client_read_sasl and vnc_client_write_sasl method implementations live in the separate vnc-auth-sasl.c file. The state required for the SASL auth mechanism is kept in a separate VncStateSASL struct, defined in vnc-auth-sasl.h and included in the main VncState. The configure script probes for SASL and automatically enables it if found, unless --disable-vnc-sasl was given to override it. Makefile | 7 Makefile.target | 5 b/qemu.sasl | 34 ++ b/vnc-auth-sasl.c | 626 ++++++++++++++++++++++++++++++++++++++++++++++++++++ b/vnc-auth-sasl.h | 67 +++++ configure | 34 ++ qemu-doc.texi | 97 ++++++++ vnc-auth-vencrypt.c | 12 vnc.c | 249 ++++++++++++++++++-- vnc.h | 31 ++ 10 files changed, 1129 insertions(+), 33 deletions(-) Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6724 c046a42c-6fe2-441c-8c8c-71466251a162
2009-03-06 21:27:28 +01:00
Support ACLs for controlling VNC access ("Daniel P. Berrange") This patch introduces a generic internal API for access control lists to be used by network servers in QEMU. It adds support for checking these ACL in the VNC server, in two places. The first ACL is for the SASL authentication mechanism, checking the SASL username. This ACL is called 'vnc.username'. The second is for the TLS authentication mechanism, when x509 client certificates are turned on, checking against the Distinguished Name of the client. This ACL is called 'vnc.x509dname' The internal API provides for an ACL with the following characteristics - A unique name, eg vnc.username, and vnc.x509dname. - A default policy, allow or deny - An ordered series of match rules, with allow or deny policy If none of the match rules apply, then the default policy is used. There is a monitor API to manipulate the ACLs, which I'll describe via examples (qemu) acl show vnc.username policy: allow (qemu) acl policy vnc.username denya acl: policy set to 'deny' (qemu) acl allow vnc.username fred acl: added rule at position 1 (qemu) acl allow vnc.username bob acl: added rule at position 2 (qemu) acl allow vnc.username joe 1 acl: added rule at position 1 (qemu) acl show vnc.username policy: deny 0: allow fred 1: allow joe 2: allow bob (qemu) acl show vnc.x509dname policy: allow (qemu) acl policy vnc.x509dname deny acl: policy set to 'deny' (qemu) acl allow vnc.x509dname C=GB,O=ACME,L=London,CN=* acl: added rule at position 1 (qemu) acl allow vnc.x509dname C=GB,O=ACME,L=Boston,CN=bob acl: added rule at position 2 (qemu) acl show vnc.x509dname policy: deny 0: allow C=GB,O=ACME,L=London,CN=* 1: allow C=GB,O=ACME,L=Boston,CN=bob By default the VNC server will not use any ACLs, allowing access to the server if the user successfully authenticates. To enable use of ACLs to restrict user access, the ',acl' flag should be given when starting QEMU. The initial ACL activated will be a 'deny all' policy and should be customized using monitor commands. eg enable SASL auth and ACLs qemu .... -vnc localhost:1,sasl,acl The next patch will provide a way to load a pre-defined ACL when starting up Makefile | 6 + b/acl.c | 185 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++ b/acl.h | 74 ++++++++++++++++++++++ configure | 18 +++++ monitor.c | 95 ++++++++++++++++++++++++++++ qemu-doc.texi | 49 ++++++++++++++ vnc-auth-sasl.c | 16 +++- vnc-auth-sasl.h | 7 ++ vnc-tls.c | 19 +++++ vnc-tls.h | 3 vnc.c | 21 ++++++ vnc.h | 3 12 files changed, 491 insertions(+), 5 deletions(-) Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6726 c046a42c-6fe2-441c-8c8c-71466251a162
2009-03-06 21:27:37 +01:00
if (vs->vd->sasl.acl == NULL) {
VNC_DEBUG("no ACL activated, allowing access\n");
return 0;
Support ACLs for controlling VNC access ("Daniel P. Berrange") This patch introduces a generic internal API for access control lists to be used by network servers in QEMU. It adds support for checking these ACL in the VNC server, in two places. The first ACL is for the SASL authentication mechanism, checking the SASL username. This ACL is called 'vnc.username'. The second is for the TLS authentication mechanism, when x509 client certificates are turned on, checking against the Distinguished Name of the client. This ACL is called 'vnc.x509dname' The internal API provides for an ACL with the following characteristics - A unique name, eg vnc.username, and vnc.x509dname. - A default policy, allow or deny - An ordered series of match rules, with allow or deny policy If none of the match rules apply, then the default policy is used. There is a monitor API to manipulate the ACLs, which I'll describe via examples (qemu) acl show vnc.username policy: allow (qemu) acl policy vnc.username denya acl: policy set to 'deny' (qemu) acl allow vnc.username fred acl: added rule at position 1 (qemu) acl allow vnc.username bob acl: added rule at position 2 (qemu) acl allow vnc.username joe 1 acl: added rule at position 1 (qemu) acl show vnc.username policy: deny 0: allow fred 1: allow joe 2: allow bob (qemu) acl show vnc.x509dname policy: allow (qemu) acl policy vnc.x509dname deny acl: policy set to 'deny' (qemu) acl allow vnc.x509dname C=GB,O=ACME,L=London,CN=* acl: added rule at position 1 (qemu) acl allow vnc.x509dname C=GB,O=ACME,L=Boston,CN=bob acl: added rule at position 2 (qemu) acl show vnc.x509dname policy: deny 0: allow C=GB,O=ACME,L=London,CN=* 1: allow C=GB,O=ACME,L=Boston,CN=bob By default the VNC server will not use any ACLs, allowing access to the server if the user successfully authenticates. To enable use of ACLs to restrict user access, the ',acl' flag should be given when starting QEMU. The initial ACL activated will be a 'deny all' policy and should be customized using monitor commands. eg enable SASL auth and ACLs qemu .... -vnc localhost:1,sasl,acl The next patch will provide a way to load a pre-defined ACL when starting up Makefile | 6 + b/acl.c | 185 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++ b/acl.h | 74 ++++++++++++++++++++++ configure | 18 +++++ monitor.c | 95 ++++++++++++++++++++++++++++ qemu-doc.texi | 49 ++++++++++++++ vnc-auth-sasl.c | 16 +++- vnc-auth-sasl.h | 7 ++ vnc-tls.c | 19 +++++ vnc-tls.h | 3 vnc.c | 21 ++++++ vnc.h | 3 12 files changed, 491 insertions(+), 5 deletions(-) Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6726 c046a42c-6fe2-441c-8c8c-71466251a162
2009-03-06 21:27:37 +01:00
}
allow = qemu_acl_party_is_allowed(vs->vd->sasl.acl, vs->sasl.username);
VNC_DEBUG("SASL client %s %s by ACL\n", vs->sasl.username,
allow ? "allowed" : "denied");
Support ACLs for controlling VNC access ("Daniel P. Berrange") This patch introduces a generic internal API for access control lists to be used by network servers in QEMU. It adds support for checking these ACL in the VNC server, in two places. The first ACL is for the SASL authentication mechanism, checking the SASL username. This ACL is called 'vnc.username'. The second is for the TLS authentication mechanism, when x509 client certificates are turned on, checking against the Distinguished Name of the client. This ACL is called 'vnc.x509dname' The internal API provides for an ACL with the following characteristics - A unique name, eg vnc.username, and vnc.x509dname. - A default policy, allow or deny - An ordered series of match rules, with allow or deny policy If none of the match rules apply, then the default policy is used. There is a monitor API to manipulate the ACLs, which I'll describe via examples (qemu) acl show vnc.username policy: allow (qemu) acl policy vnc.username denya acl: policy set to 'deny' (qemu) acl allow vnc.username fred acl: added rule at position 1 (qemu) acl allow vnc.username bob acl: added rule at position 2 (qemu) acl allow vnc.username joe 1 acl: added rule at position 1 (qemu) acl show vnc.username policy: deny 0: allow fred 1: allow joe 2: allow bob (qemu) acl show vnc.x509dname policy: allow (qemu) acl policy vnc.x509dname deny acl: policy set to 'deny' (qemu) acl allow vnc.x509dname C=GB,O=ACME,L=London,CN=* acl: added rule at position 1 (qemu) acl allow vnc.x509dname C=GB,O=ACME,L=Boston,CN=bob acl: added rule at position 2 (qemu) acl show vnc.x509dname policy: deny 0: allow C=GB,O=ACME,L=London,CN=* 1: allow C=GB,O=ACME,L=Boston,CN=bob By default the VNC server will not use any ACLs, allowing access to the server if the user successfully authenticates. To enable use of ACLs to restrict user access, the ',acl' flag should be given when starting QEMU. The initial ACL activated will be a 'deny all' policy and should be customized using monitor commands. eg enable SASL auth and ACLs qemu .... -vnc localhost:1,sasl,acl The next patch will provide a way to load a pre-defined ACL when starting up Makefile | 6 + b/acl.c | 185 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++ b/acl.h | 74 ++++++++++++++++++++++ configure | 18 +++++ monitor.c | 95 ++++++++++++++++++++++++++++ qemu-doc.texi | 49 ++++++++++++++ vnc-auth-sasl.c | 16 +++- vnc-auth-sasl.h | 7 ++ vnc-tls.c | 19 +++++ vnc-tls.h | 3 vnc.c | 21 ++++++ vnc.h | 3 12 files changed, 491 insertions(+), 5 deletions(-) Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6726 c046a42c-6fe2-441c-8c8c-71466251a162
2009-03-06 21:27:37 +01:00
return allow ? 0 : -1;
Add SASL authentication support ("Daniel P. Berrange") This patch adds the new SASL authentication protocol to the VNC server. It is enabled by setting the 'sasl' flag when launching VNC. SASL can optionally provide encryption via its SSF layer, if a suitable mechanism is configured (eg, GSSAPI/Kerberos, or Digest-MD5). If an SSF layer is not available, then it should be combined with the x509 VNC authentication protocol which provides encryption. eg, if using GSSAPI qemu -vnc localhost:1,sasl eg if using TLS/x509 for encryption qemu -vnc localhost:1,sasl,tls,x509 By default the Cyrus SASL library will look for its configuration in the file /etc/sasl2/qemu.conf. For non-root users, this can be overridden by setting the SASL_CONF_PATH environment variable, eg to make it look in $HOME/.sasl2. NB unprivileged users may not have access to the full range of SASL mechanisms, since some of them require some administrative privileges to configure. The patch includes an example SASL configuration file which illustrates config for GSSAPI and Digest-MD5, though it should be noted that the latter is not really considered secure any more. Most of the SASL authentication code is located in a separate source file, vnc-auth-sasl.c. The main vnc.c file only contains minimal integration glue, specifically parsing of command line flags / setup, and calls to start the SASL auth process, to do encoding/decoding for data. There are several possible stacks for reading & writing of data, depending on the combo of VNC authentication methods in use - Clear. read/write straight to socket - TLS. read/write via GNUTLS helpers - SASL. encode/decode via SASL SSF layer, then read/write to socket - SASL+TLS. encode/decode via SASL SSF layer, then read/write via GNUTLS Hence, the vnc_client_read & vnc_client_write methods have been refactored a little. vnc_client_read: main entry point for reading, calls either - vnc_client_read_plain reading, with no intermediate decoding - vnc_client_read_sasl reading, with SASL SSF decoding These two methods, then call vnc_client_read_buf(). This decides whether to write to the socket directly or write via GNUTLS. The situation is the same for writing data. More extensive comments have been added in the code / patch. The vnc_client_read_sasl and vnc_client_write_sasl method implementations live in the separate vnc-auth-sasl.c file. The state required for the SASL auth mechanism is kept in a separate VncStateSASL struct, defined in vnc-auth-sasl.h and included in the main VncState. The configure script probes for SASL and automatically enables it if found, unless --disable-vnc-sasl was given to override it. Makefile | 7 Makefile.target | 5 b/qemu.sasl | 34 ++ b/vnc-auth-sasl.c | 626 ++++++++++++++++++++++++++++++++++++++++++++++++++++ b/vnc-auth-sasl.h | 67 +++++ configure | 34 ++ qemu-doc.texi | 97 ++++++++ vnc-auth-vencrypt.c | 12 vnc.c | 249 ++++++++++++++++++-- vnc.h | 31 ++ 10 files changed, 1129 insertions(+), 33 deletions(-) Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6724 c046a42c-6fe2-441c-8c8c-71466251a162
2009-03-06 21:27:28 +01:00
}
static int vnc_auth_sasl_check_ssf(VncState *vs)
{
const void *val;
int err, ssf;
if (!vs->sasl.wantSSF)
return 1;
Add SASL authentication support ("Daniel P. Berrange") This patch adds the new SASL authentication protocol to the VNC server. It is enabled by setting the 'sasl' flag when launching VNC. SASL can optionally provide encryption via its SSF layer, if a suitable mechanism is configured (eg, GSSAPI/Kerberos, or Digest-MD5). If an SSF layer is not available, then it should be combined with the x509 VNC authentication protocol which provides encryption. eg, if using GSSAPI qemu -vnc localhost:1,sasl eg if using TLS/x509 for encryption qemu -vnc localhost:1,sasl,tls,x509 By default the Cyrus SASL library will look for its configuration in the file /etc/sasl2/qemu.conf. For non-root users, this can be overridden by setting the SASL_CONF_PATH environment variable, eg to make it look in $HOME/.sasl2. NB unprivileged users may not have access to the full range of SASL mechanisms, since some of them require some administrative privileges to configure. The patch includes an example SASL configuration file which illustrates config for GSSAPI and Digest-MD5, though it should be noted that the latter is not really considered secure any more. Most of the SASL authentication code is located in a separate source file, vnc-auth-sasl.c. The main vnc.c file only contains minimal integration glue, specifically parsing of command line flags / setup, and calls to start the SASL auth process, to do encoding/decoding for data. There are several possible stacks for reading & writing of data, depending on the combo of VNC authentication methods in use - Clear. read/write straight to socket - TLS. read/write via GNUTLS helpers - SASL. encode/decode via SASL SSF layer, then read/write to socket - SASL+TLS. encode/decode via SASL SSF layer, then read/write via GNUTLS Hence, the vnc_client_read & vnc_client_write methods have been refactored a little. vnc_client_read: main entry point for reading, calls either - vnc_client_read_plain reading, with no intermediate decoding - vnc_client_read_sasl reading, with SASL SSF decoding These two methods, then call vnc_client_read_buf(). This decides whether to write to the socket directly or write via GNUTLS. The situation is the same for writing data. More extensive comments have been added in the code / patch. The vnc_client_read_sasl and vnc_client_write_sasl method implementations live in the separate vnc-auth-sasl.c file. The state required for the SASL auth mechanism is kept in a separate VncStateSASL struct, defined in vnc-auth-sasl.h and included in the main VncState. The configure script probes for SASL and automatically enables it if found, unless --disable-vnc-sasl was given to override it. Makefile | 7 Makefile.target | 5 b/qemu.sasl | 34 ++ b/vnc-auth-sasl.c | 626 ++++++++++++++++++++++++++++++++++++++++++++++++++++ b/vnc-auth-sasl.h | 67 +++++ configure | 34 ++ qemu-doc.texi | 97 ++++++++ vnc-auth-vencrypt.c | 12 vnc.c | 249 ++++++++++++++++++-- vnc.h | 31 ++ 10 files changed, 1129 insertions(+), 33 deletions(-) Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6724 c046a42c-6fe2-441c-8c8c-71466251a162
2009-03-06 21:27:28 +01:00
err = sasl_getprop(vs->sasl.conn, SASL_SSF, &val);
if (err != SASL_OK)
return 0;
Add SASL authentication support ("Daniel P. Berrange") This patch adds the new SASL authentication protocol to the VNC server. It is enabled by setting the 'sasl' flag when launching VNC. SASL can optionally provide encryption via its SSF layer, if a suitable mechanism is configured (eg, GSSAPI/Kerberos, or Digest-MD5). If an SSF layer is not available, then it should be combined with the x509 VNC authentication protocol which provides encryption. eg, if using GSSAPI qemu -vnc localhost:1,sasl eg if using TLS/x509 for encryption qemu -vnc localhost:1,sasl,tls,x509 By default the Cyrus SASL library will look for its configuration in the file /etc/sasl2/qemu.conf. For non-root users, this can be overridden by setting the SASL_CONF_PATH environment variable, eg to make it look in $HOME/.sasl2. NB unprivileged users may not have access to the full range of SASL mechanisms, since some of them require some administrative privileges to configure. The patch includes an example SASL configuration file which illustrates config for GSSAPI and Digest-MD5, though it should be noted that the latter is not really considered secure any more. Most of the SASL authentication code is located in a separate source file, vnc-auth-sasl.c. The main vnc.c file only contains minimal integration glue, specifically parsing of command line flags / setup, and calls to start the SASL auth process, to do encoding/decoding for data. There are several possible stacks for reading & writing of data, depending on the combo of VNC authentication methods in use - Clear. read/write straight to socket - TLS. read/write via GNUTLS helpers - SASL. encode/decode via SASL SSF layer, then read/write to socket - SASL+TLS. encode/decode via SASL SSF layer, then read/write via GNUTLS Hence, the vnc_client_read & vnc_client_write methods have been refactored a little. vnc_client_read: main entry point for reading, calls either - vnc_client_read_plain reading, with no intermediate decoding - vnc_client_read_sasl reading, with SASL SSF decoding These two methods, then call vnc_client_read_buf(). This decides whether to write to the socket directly or write via GNUTLS. The situation is the same for writing data. More extensive comments have been added in the code / patch. The vnc_client_read_sasl and vnc_client_write_sasl method implementations live in the separate vnc-auth-sasl.c file. The state required for the SASL auth mechanism is kept in a separate VncStateSASL struct, defined in vnc-auth-sasl.h and included in the main VncState. The configure script probes for SASL and automatically enables it if found, unless --disable-vnc-sasl was given to override it. Makefile | 7 Makefile.target | 5 b/qemu.sasl | 34 ++ b/vnc-auth-sasl.c | 626 ++++++++++++++++++++++++++++++++++++++++++++++++++++ b/vnc-auth-sasl.h | 67 +++++ configure | 34 ++ qemu-doc.texi | 97 ++++++++ vnc-auth-vencrypt.c | 12 vnc.c | 249 ++++++++++++++++++-- vnc.h | 31 ++ 10 files changed, 1129 insertions(+), 33 deletions(-) Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6724 c046a42c-6fe2-441c-8c8c-71466251a162
2009-03-06 21:27:28 +01:00
ssf = *(const int *)val;
VNC_DEBUG("negotiated an SSF of %d\n", ssf);
if (ssf < 56)
return 0; /* 56 is good for Kerberos */
Add SASL authentication support ("Daniel P. Berrange") This patch adds the new SASL authentication protocol to the VNC server. It is enabled by setting the 'sasl' flag when launching VNC. SASL can optionally provide encryption via its SSF layer, if a suitable mechanism is configured (eg, GSSAPI/Kerberos, or Digest-MD5). If an SSF layer is not available, then it should be combined with the x509 VNC authentication protocol which provides encryption. eg, if using GSSAPI qemu -vnc localhost:1,sasl eg if using TLS/x509 for encryption qemu -vnc localhost:1,sasl,tls,x509 By default the Cyrus SASL library will look for its configuration in the file /etc/sasl2/qemu.conf. For non-root users, this can be overridden by setting the SASL_CONF_PATH environment variable, eg to make it look in $HOME/.sasl2. NB unprivileged users may not have access to the full range of SASL mechanisms, since some of them require some administrative privileges to configure. The patch includes an example SASL configuration file which illustrates config for GSSAPI and Digest-MD5, though it should be noted that the latter is not really considered secure any more. Most of the SASL authentication code is located in a separate source file, vnc-auth-sasl.c. The main vnc.c file only contains minimal integration glue, specifically parsing of command line flags / setup, and calls to start the SASL auth process, to do encoding/decoding for data. There are several possible stacks for reading & writing of data, depending on the combo of VNC authentication methods in use - Clear. read/write straight to socket - TLS. read/write via GNUTLS helpers - SASL. encode/decode via SASL SSF layer, then read/write to socket - SASL+TLS. encode/decode via SASL SSF layer, then read/write via GNUTLS Hence, the vnc_client_read & vnc_client_write methods have been refactored a little. vnc_client_read: main entry point for reading, calls either - vnc_client_read_plain reading, with no intermediate decoding - vnc_client_read_sasl reading, with SASL SSF decoding These two methods, then call vnc_client_read_buf(). This decides whether to write to the socket directly or write via GNUTLS. The situation is the same for writing data. More extensive comments have been added in the code / patch. The vnc_client_read_sasl and vnc_client_write_sasl method implementations live in the separate vnc-auth-sasl.c file. The state required for the SASL auth mechanism is kept in a separate VncStateSASL struct, defined in vnc-auth-sasl.h and included in the main VncState. The configure script probes for SASL and automatically enables it if found, unless --disable-vnc-sasl was given to override it. Makefile | 7 Makefile.target | 5 b/qemu.sasl | 34 ++ b/vnc-auth-sasl.c | 626 ++++++++++++++++++++++++++++++++++++++++++++++++++++ b/vnc-auth-sasl.h | 67 +++++ configure | 34 ++ qemu-doc.texi | 97 ++++++++ vnc-auth-vencrypt.c | 12 vnc.c | 249 ++++++++++++++++++-- vnc.h | 31 ++ 10 files changed, 1129 insertions(+), 33 deletions(-) Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6724 c046a42c-6fe2-441c-8c8c-71466251a162
2009-03-06 21:27:28 +01:00
/* Only setup for read initially, because we're about to send an RPC
* reply which must be in plain text. When the next incoming RPC
* arrives, we'll switch on writes too
*
* cf qemudClientReadSASL in qemud.c
*/
vs->sasl.runSSF = 1;
/* We have a SSF that's good enough */
return 1;
}
/*
* Step Msg
*
* Input from client:
*
* u32 clientin-length
* u8-array clientin-string
*
* Output to client:
*
* u32 serverout-length
* u8-array serverout-strin
* u8 continue
*/
static int protocol_client_auth_sasl_step_len(VncState *vs, uint8_t *data, size_t len);
static int protocol_client_auth_sasl_step(VncState *vs, uint8_t *data, size_t len)
{
uint32_t datalen = len;
const char *serverout;
unsigned int serveroutlen;
int err;
char *clientdata = NULL;
/* NB, distinction of NULL vs "" is *critical* in SASL */
if (datalen) {
clientdata = (char*)data;
clientdata[datalen-1] = '\0'; /* Wire includes '\0', but make sure */
datalen--; /* Don't count NULL byte when passing to _start() */
Add SASL authentication support ("Daniel P. Berrange") This patch adds the new SASL authentication protocol to the VNC server. It is enabled by setting the 'sasl' flag when launching VNC. SASL can optionally provide encryption via its SSF layer, if a suitable mechanism is configured (eg, GSSAPI/Kerberos, or Digest-MD5). If an SSF layer is not available, then it should be combined with the x509 VNC authentication protocol which provides encryption. eg, if using GSSAPI qemu -vnc localhost:1,sasl eg if using TLS/x509 for encryption qemu -vnc localhost:1,sasl,tls,x509 By default the Cyrus SASL library will look for its configuration in the file /etc/sasl2/qemu.conf. For non-root users, this can be overridden by setting the SASL_CONF_PATH environment variable, eg to make it look in $HOME/.sasl2. NB unprivileged users may not have access to the full range of SASL mechanisms, since some of them require some administrative privileges to configure. The patch includes an example SASL configuration file which illustrates config for GSSAPI and Digest-MD5, though it should be noted that the latter is not really considered secure any more. Most of the SASL authentication code is located in a separate source file, vnc-auth-sasl.c. The main vnc.c file only contains minimal integration glue, specifically parsing of command line flags / setup, and calls to start the SASL auth process, to do encoding/decoding for data. There are several possible stacks for reading & writing of data, depending on the combo of VNC authentication methods in use - Clear. read/write straight to socket - TLS. read/write via GNUTLS helpers - SASL. encode/decode via SASL SSF layer, then read/write to socket - SASL+TLS. encode/decode via SASL SSF layer, then read/write via GNUTLS Hence, the vnc_client_read & vnc_client_write methods have been refactored a little. vnc_client_read: main entry point for reading, calls either - vnc_client_read_plain reading, with no intermediate decoding - vnc_client_read_sasl reading, with SASL SSF decoding These two methods, then call vnc_client_read_buf(). This decides whether to write to the socket directly or write via GNUTLS. The situation is the same for writing data. More extensive comments have been added in the code / patch. The vnc_client_read_sasl and vnc_client_write_sasl method implementations live in the separate vnc-auth-sasl.c file. The state required for the SASL auth mechanism is kept in a separate VncStateSASL struct, defined in vnc-auth-sasl.h and included in the main VncState. The configure script probes for SASL and automatically enables it if found, unless --disable-vnc-sasl was given to override it. Makefile | 7 Makefile.target | 5 b/qemu.sasl | 34 ++ b/vnc-auth-sasl.c | 626 ++++++++++++++++++++++++++++++++++++++++++++++++++++ b/vnc-auth-sasl.h | 67 +++++ configure | 34 ++ qemu-doc.texi | 97 ++++++++ vnc-auth-vencrypt.c | 12 vnc.c | 249 ++++++++++++++++++-- vnc.h | 31 ++ 10 files changed, 1129 insertions(+), 33 deletions(-) Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6724 c046a42c-6fe2-441c-8c8c-71466251a162
2009-03-06 21:27:28 +01:00
}
VNC_DEBUG("Step using SASL Data %p (%d bytes)\n",
clientdata, datalen);
Add SASL authentication support ("Daniel P. Berrange") This patch adds the new SASL authentication protocol to the VNC server. It is enabled by setting the 'sasl' flag when launching VNC. SASL can optionally provide encryption via its SSF layer, if a suitable mechanism is configured (eg, GSSAPI/Kerberos, or Digest-MD5). If an SSF layer is not available, then it should be combined with the x509 VNC authentication protocol which provides encryption. eg, if using GSSAPI qemu -vnc localhost:1,sasl eg if using TLS/x509 for encryption qemu -vnc localhost:1,sasl,tls,x509 By default the Cyrus SASL library will look for its configuration in the file /etc/sasl2/qemu.conf. For non-root users, this can be overridden by setting the SASL_CONF_PATH environment variable, eg to make it look in $HOME/.sasl2. NB unprivileged users may not have access to the full range of SASL mechanisms, since some of them require some administrative privileges to configure. The patch includes an example SASL configuration file which illustrates config for GSSAPI and Digest-MD5, though it should be noted that the latter is not really considered secure any more. Most of the SASL authentication code is located in a separate source file, vnc-auth-sasl.c. The main vnc.c file only contains minimal integration glue, specifically parsing of command line flags / setup, and calls to start the SASL auth process, to do encoding/decoding for data. There are several possible stacks for reading & writing of data, depending on the combo of VNC authentication methods in use - Clear. read/write straight to socket - TLS. read/write via GNUTLS helpers - SASL. encode/decode via SASL SSF layer, then read/write to socket - SASL+TLS. encode/decode via SASL SSF layer, then read/write via GNUTLS Hence, the vnc_client_read & vnc_client_write methods have been refactored a little. vnc_client_read: main entry point for reading, calls either - vnc_client_read_plain reading, with no intermediate decoding - vnc_client_read_sasl reading, with SASL SSF decoding These two methods, then call vnc_client_read_buf(). This decides whether to write to the socket directly or write via GNUTLS. The situation is the same for writing data. More extensive comments have been added in the code / patch. The vnc_client_read_sasl and vnc_client_write_sasl method implementations live in the separate vnc-auth-sasl.c file. The state required for the SASL auth mechanism is kept in a separate VncStateSASL struct, defined in vnc-auth-sasl.h and included in the main VncState. The configure script probes for SASL and automatically enables it if found, unless --disable-vnc-sasl was given to override it. Makefile | 7 Makefile.target | 5 b/qemu.sasl | 34 ++ b/vnc-auth-sasl.c | 626 ++++++++++++++++++++++++++++++++++++++++++++++++++++ b/vnc-auth-sasl.h | 67 +++++ configure | 34 ++ qemu-doc.texi | 97 ++++++++ vnc-auth-vencrypt.c | 12 vnc.c | 249 ++++++++++++++++++-- vnc.h | 31 ++ 10 files changed, 1129 insertions(+), 33 deletions(-) Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6724 c046a42c-6fe2-441c-8c8c-71466251a162
2009-03-06 21:27:28 +01:00
err = sasl_server_step(vs->sasl.conn,
clientdata,
datalen,
&serverout,
&serveroutlen);
Add SASL authentication support ("Daniel P. Berrange") This patch adds the new SASL authentication protocol to the VNC server. It is enabled by setting the 'sasl' flag when launching VNC. SASL can optionally provide encryption via its SSF layer, if a suitable mechanism is configured (eg, GSSAPI/Kerberos, or Digest-MD5). If an SSF layer is not available, then it should be combined with the x509 VNC authentication protocol which provides encryption. eg, if using GSSAPI qemu -vnc localhost:1,sasl eg if using TLS/x509 for encryption qemu -vnc localhost:1,sasl,tls,x509 By default the Cyrus SASL library will look for its configuration in the file /etc/sasl2/qemu.conf. For non-root users, this can be overridden by setting the SASL_CONF_PATH environment variable, eg to make it look in $HOME/.sasl2. NB unprivileged users may not have access to the full range of SASL mechanisms, since some of them require some administrative privileges to configure. The patch includes an example SASL configuration file which illustrates config for GSSAPI and Digest-MD5, though it should be noted that the latter is not really considered secure any more. Most of the SASL authentication code is located in a separate source file, vnc-auth-sasl.c. The main vnc.c file only contains minimal integration glue, specifically parsing of command line flags / setup, and calls to start the SASL auth process, to do encoding/decoding for data. There are several possible stacks for reading & writing of data, depending on the combo of VNC authentication methods in use - Clear. read/write straight to socket - TLS. read/write via GNUTLS helpers - SASL. encode/decode via SASL SSF layer, then read/write to socket - SASL+TLS. encode/decode via SASL SSF layer, then read/write via GNUTLS Hence, the vnc_client_read & vnc_client_write methods have been refactored a little. vnc_client_read: main entry point for reading, calls either - vnc_client_read_plain reading, with no intermediate decoding - vnc_client_read_sasl reading, with SASL SSF decoding These two methods, then call vnc_client_read_buf(). This decides whether to write to the socket directly or write via GNUTLS. The situation is the same for writing data. More extensive comments have been added in the code / patch. The vnc_client_read_sasl and vnc_client_write_sasl method implementations live in the separate vnc-auth-sasl.c file. The state required for the SASL auth mechanism is kept in a separate VncStateSASL struct, defined in vnc-auth-sasl.h and included in the main VncState. The configure script probes for SASL and automatically enables it if found, unless --disable-vnc-sasl was given to override it. Makefile | 7 Makefile.target | 5 b/qemu.sasl | 34 ++ b/vnc-auth-sasl.c | 626 ++++++++++++++++++++++++++++++++++++++++++++++++++++ b/vnc-auth-sasl.h | 67 +++++ configure | 34 ++ qemu-doc.texi | 97 ++++++++ vnc-auth-vencrypt.c | 12 vnc.c | 249 ++++++++++++++++++-- vnc.h | 31 ++ 10 files changed, 1129 insertions(+), 33 deletions(-) Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6724 c046a42c-6fe2-441c-8c8c-71466251a162
2009-03-06 21:27:28 +01:00
if (err != SASL_OK &&
err != SASL_CONTINUE) {
VNC_DEBUG("sasl step failed %d (%s)\n",
err, sasl_errdetail(vs->sasl.conn));
sasl_dispose(&vs->sasl.conn);
vs->sasl.conn = NULL;
goto authabort;
Add SASL authentication support ("Daniel P. Berrange") This patch adds the new SASL authentication protocol to the VNC server. It is enabled by setting the 'sasl' flag when launching VNC. SASL can optionally provide encryption via its SSF layer, if a suitable mechanism is configured (eg, GSSAPI/Kerberos, or Digest-MD5). If an SSF layer is not available, then it should be combined with the x509 VNC authentication protocol which provides encryption. eg, if using GSSAPI qemu -vnc localhost:1,sasl eg if using TLS/x509 for encryption qemu -vnc localhost:1,sasl,tls,x509 By default the Cyrus SASL library will look for its configuration in the file /etc/sasl2/qemu.conf. For non-root users, this can be overridden by setting the SASL_CONF_PATH environment variable, eg to make it look in $HOME/.sasl2. NB unprivileged users may not have access to the full range of SASL mechanisms, since some of them require some administrative privileges to configure. The patch includes an example SASL configuration file which illustrates config for GSSAPI and Digest-MD5, though it should be noted that the latter is not really considered secure any more. Most of the SASL authentication code is located in a separate source file, vnc-auth-sasl.c. The main vnc.c file only contains minimal integration glue, specifically parsing of command line flags / setup, and calls to start the SASL auth process, to do encoding/decoding for data. There are several possible stacks for reading & writing of data, depending on the combo of VNC authentication methods in use - Clear. read/write straight to socket - TLS. read/write via GNUTLS helpers - SASL. encode/decode via SASL SSF layer, then read/write to socket - SASL+TLS. encode/decode via SASL SSF layer, then read/write via GNUTLS Hence, the vnc_client_read & vnc_client_write methods have been refactored a little. vnc_client_read: main entry point for reading, calls either - vnc_client_read_plain reading, with no intermediate decoding - vnc_client_read_sasl reading, with SASL SSF decoding These two methods, then call vnc_client_read_buf(). This decides whether to write to the socket directly or write via GNUTLS. The situation is the same for writing data. More extensive comments have been added in the code / patch. The vnc_client_read_sasl and vnc_client_write_sasl method implementations live in the separate vnc-auth-sasl.c file. The state required for the SASL auth mechanism is kept in a separate VncStateSASL struct, defined in vnc-auth-sasl.h and included in the main VncState. The configure script probes for SASL and automatically enables it if found, unless --disable-vnc-sasl was given to override it. Makefile | 7 Makefile.target | 5 b/qemu.sasl | 34 ++ b/vnc-auth-sasl.c | 626 ++++++++++++++++++++++++++++++++++++++++++++++++++++ b/vnc-auth-sasl.h | 67 +++++ configure | 34 ++ qemu-doc.texi | 97 ++++++++ vnc-auth-vencrypt.c | 12 vnc.c | 249 ++++++++++++++++++-- vnc.h | 31 ++ 10 files changed, 1129 insertions(+), 33 deletions(-) Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6724 c046a42c-6fe2-441c-8c8c-71466251a162
2009-03-06 21:27:28 +01:00
}
if (serveroutlen > SASL_DATA_MAX_LEN) {
VNC_DEBUG("sasl step reply data too long %d\n",
serveroutlen);
sasl_dispose(&vs->sasl.conn);
vs->sasl.conn = NULL;
goto authabort;
Add SASL authentication support ("Daniel P. Berrange") This patch adds the new SASL authentication protocol to the VNC server. It is enabled by setting the 'sasl' flag when launching VNC. SASL can optionally provide encryption via its SSF layer, if a suitable mechanism is configured (eg, GSSAPI/Kerberos, or Digest-MD5). If an SSF layer is not available, then it should be combined with the x509 VNC authentication protocol which provides encryption. eg, if using GSSAPI qemu -vnc localhost:1,sasl eg if using TLS/x509 for encryption qemu -vnc localhost:1,sasl,tls,x509 By default the Cyrus SASL library will look for its configuration in the file /etc/sasl2/qemu.conf. For non-root users, this can be overridden by setting the SASL_CONF_PATH environment variable, eg to make it look in $HOME/.sasl2. NB unprivileged users may not have access to the full range of SASL mechanisms, since some of them require some administrative privileges to configure. The patch includes an example SASL configuration file which illustrates config for GSSAPI and Digest-MD5, though it should be noted that the latter is not really considered secure any more. Most of the SASL authentication code is located in a separate source file, vnc-auth-sasl.c. The main vnc.c file only contains minimal integration glue, specifically parsing of command line flags / setup, and calls to start the SASL auth process, to do encoding/decoding for data. There are several possible stacks for reading & writing of data, depending on the combo of VNC authentication methods in use - Clear. read/write straight to socket - TLS. read/write via GNUTLS helpers - SASL. encode/decode via SASL SSF layer, then read/write to socket - SASL+TLS. encode/decode via SASL SSF layer, then read/write via GNUTLS Hence, the vnc_client_read & vnc_client_write methods have been refactored a little. vnc_client_read: main entry point for reading, calls either - vnc_client_read_plain reading, with no intermediate decoding - vnc_client_read_sasl reading, with SASL SSF decoding These two methods, then call vnc_client_read_buf(). This decides whether to write to the socket directly or write via GNUTLS. The situation is the same for writing data. More extensive comments have been added in the code / patch. The vnc_client_read_sasl and vnc_client_write_sasl method implementations live in the separate vnc-auth-sasl.c file. The state required for the SASL auth mechanism is kept in a separate VncStateSASL struct, defined in vnc-auth-sasl.h and included in the main VncState. The configure script probes for SASL and automatically enables it if found, unless --disable-vnc-sasl was given to override it. Makefile | 7 Makefile.target | 5 b/qemu.sasl | 34 ++ b/vnc-auth-sasl.c | 626 ++++++++++++++++++++++++++++++++++++++++++++++++++++ b/vnc-auth-sasl.h | 67 +++++ configure | 34 ++ qemu-doc.texi | 97 ++++++++ vnc-auth-vencrypt.c | 12 vnc.c | 249 ++++++++++++++++++-- vnc.h | 31 ++ 10 files changed, 1129 insertions(+), 33 deletions(-) Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6724 c046a42c-6fe2-441c-8c8c-71466251a162
2009-03-06 21:27:28 +01:00
}
VNC_DEBUG("SASL return data %d bytes, nil; %d\n",
serveroutlen, serverout ? 0 : 1);
Add SASL authentication support ("Daniel P. Berrange") This patch adds the new SASL authentication protocol to the VNC server. It is enabled by setting the 'sasl' flag when launching VNC. SASL can optionally provide encryption via its SSF layer, if a suitable mechanism is configured (eg, GSSAPI/Kerberos, or Digest-MD5). If an SSF layer is not available, then it should be combined with the x509 VNC authentication protocol which provides encryption. eg, if using GSSAPI qemu -vnc localhost:1,sasl eg if using TLS/x509 for encryption qemu -vnc localhost:1,sasl,tls,x509 By default the Cyrus SASL library will look for its configuration in the file /etc/sasl2/qemu.conf. For non-root users, this can be overridden by setting the SASL_CONF_PATH environment variable, eg to make it look in $HOME/.sasl2. NB unprivileged users may not have access to the full range of SASL mechanisms, since some of them require some administrative privileges to configure. The patch includes an example SASL configuration file which illustrates config for GSSAPI and Digest-MD5, though it should be noted that the latter is not really considered secure any more. Most of the SASL authentication code is located in a separate source file, vnc-auth-sasl.c. The main vnc.c file only contains minimal integration glue, specifically parsing of command line flags / setup, and calls to start the SASL auth process, to do encoding/decoding for data. There are several possible stacks for reading & writing of data, depending on the combo of VNC authentication methods in use - Clear. read/write straight to socket - TLS. read/write via GNUTLS helpers - SASL. encode/decode via SASL SSF layer, then read/write to socket - SASL+TLS. encode/decode via SASL SSF layer, then read/write via GNUTLS Hence, the vnc_client_read & vnc_client_write methods have been refactored a little. vnc_client_read: main entry point for reading, calls either - vnc_client_read_plain reading, with no intermediate decoding - vnc_client_read_sasl reading, with SASL SSF decoding These two methods, then call vnc_client_read_buf(). This decides whether to write to the socket directly or write via GNUTLS. The situation is the same for writing data. More extensive comments have been added in the code / patch. The vnc_client_read_sasl and vnc_client_write_sasl method implementations live in the separate vnc-auth-sasl.c file. The state required for the SASL auth mechanism is kept in a separate VncStateSASL struct, defined in vnc-auth-sasl.h and included in the main VncState. The configure script probes for SASL and automatically enables it if found, unless --disable-vnc-sasl was given to override it. Makefile | 7 Makefile.target | 5 b/qemu.sasl | 34 ++ b/vnc-auth-sasl.c | 626 ++++++++++++++++++++++++++++++++++++++++++++++++++++ b/vnc-auth-sasl.h | 67 +++++ configure | 34 ++ qemu-doc.texi | 97 ++++++++ vnc-auth-vencrypt.c | 12 vnc.c | 249 ++++++++++++++++++-- vnc.h | 31 ++ 10 files changed, 1129 insertions(+), 33 deletions(-) Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6724 c046a42c-6fe2-441c-8c8c-71466251a162
2009-03-06 21:27:28 +01:00
if (serveroutlen) {
vnc_write_u32(vs, serveroutlen + 1);
vnc_write(vs, serverout, serveroutlen + 1);
Add SASL authentication support ("Daniel P. Berrange") This patch adds the new SASL authentication protocol to the VNC server. It is enabled by setting the 'sasl' flag when launching VNC. SASL can optionally provide encryption via its SSF layer, if a suitable mechanism is configured (eg, GSSAPI/Kerberos, or Digest-MD5). If an SSF layer is not available, then it should be combined with the x509 VNC authentication protocol which provides encryption. eg, if using GSSAPI qemu -vnc localhost:1,sasl eg if using TLS/x509 for encryption qemu -vnc localhost:1,sasl,tls,x509 By default the Cyrus SASL library will look for its configuration in the file /etc/sasl2/qemu.conf. For non-root users, this can be overridden by setting the SASL_CONF_PATH environment variable, eg to make it look in $HOME/.sasl2. NB unprivileged users may not have access to the full range of SASL mechanisms, since some of them require some administrative privileges to configure. The patch includes an example SASL configuration file which illustrates config for GSSAPI and Digest-MD5, though it should be noted that the latter is not really considered secure any more. Most of the SASL authentication code is located in a separate source file, vnc-auth-sasl.c. The main vnc.c file only contains minimal integration glue, specifically parsing of command line flags / setup, and calls to start the SASL auth process, to do encoding/decoding for data. There are several possible stacks for reading & writing of data, depending on the combo of VNC authentication methods in use - Clear. read/write straight to socket - TLS. read/write via GNUTLS helpers - SASL. encode/decode via SASL SSF layer, then read/write to socket - SASL+TLS. encode/decode via SASL SSF layer, then read/write via GNUTLS Hence, the vnc_client_read & vnc_client_write methods have been refactored a little. vnc_client_read: main entry point for reading, calls either - vnc_client_read_plain reading, with no intermediate decoding - vnc_client_read_sasl reading, with SASL SSF decoding These two methods, then call vnc_client_read_buf(). This decides whether to write to the socket directly or write via GNUTLS. The situation is the same for writing data. More extensive comments have been added in the code / patch. The vnc_client_read_sasl and vnc_client_write_sasl method implementations live in the separate vnc-auth-sasl.c file. The state required for the SASL auth mechanism is kept in a separate VncStateSASL struct, defined in vnc-auth-sasl.h and included in the main VncState. The configure script probes for SASL and automatically enables it if found, unless --disable-vnc-sasl was given to override it. Makefile | 7 Makefile.target | 5 b/qemu.sasl | 34 ++ b/vnc-auth-sasl.c | 626 ++++++++++++++++++++++++++++++++++++++++++++++++++++ b/vnc-auth-sasl.h | 67 +++++ configure | 34 ++ qemu-doc.texi | 97 ++++++++ vnc-auth-vencrypt.c | 12 vnc.c | 249 ++++++++++++++++++-- vnc.h | 31 ++ 10 files changed, 1129 insertions(+), 33 deletions(-) Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6724 c046a42c-6fe2-441c-8c8c-71466251a162
2009-03-06 21:27:28 +01:00
} else {
vnc_write_u32(vs, 0);
Add SASL authentication support ("Daniel P. Berrange") This patch adds the new SASL authentication protocol to the VNC server. It is enabled by setting the 'sasl' flag when launching VNC. SASL can optionally provide encryption via its SSF layer, if a suitable mechanism is configured (eg, GSSAPI/Kerberos, or Digest-MD5). If an SSF layer is not available, then it should be combined with the x509 VNC authentication protocol which provides encryption. eg, if using GSSAPI qemu -vnc localhost:1,sasl eg if using TLS/x509 for encryption qemu -vnc localhost:1,sasl,tls,x509 By default the Cyrus SASL library will look for its configuration in the file /etc/sasl2/qemu.conf. For non-root users, this can be overridden by setting the SASL_CONF_PATH environment variable, eg to make it look in $HOME/.sasl2. NB unprivileged users may not have access to the full range of SASL mechanisms, since some of them require some administrative privileges to configure. The patch includes an example SASL configuration file which illustrates config for GSSAPI and Digest-MD5, though it should be noted that the latter is not really considered secure any more. Most of the SASL authentication code is located in a separate source file, vnc-auth-sasl.c. The main vnc.c file only contains minimal integration glue, specifically parsing of command line flags / setup, and calls to start the SASL auth process, to do encoding/decoding for data. There are several possible stacks for reading & writing of data, depending on the combo of VNC authentication methods in use - Clear. read/write straight to socket - TLS. read/write via GNUTLS helpers - SASL. encode/decode via SASL SSF layer, then read/write to socket - SASL+TLS. encode/decode via SASL SSF layer, then read/write via GNUTLS Hence, the vnc_client_read & vnc_client_write methods have been refactored a little. vnc_client_read: main entry point for reading, calls either - vnc_client_read_plain reading, with no intermediate decoding - vnc_client_read_sasl reading, with SASL SSF decoding These two methods, then call vnc_client_read_buf(). This decides whether to write to the socket directly or write via GNUTLS. The situation is the same for writing data. More extensive comments have been added in the code / patch. The vnc_client_read_sasl and vnc_client_write_sasl method implementations live in the separate vnc-auth-sasl.c file. The state required for the SASL auth mechanism is kept in a separate VncStateSASL struct, defined in vnc-auth-sasl.h and included in the main VncState. The configure script probes for SASL and automatically enables it if found, unless --disable-vnc-sasl was given to override it. Makefile | 7 Makefile.target | 5 b/qemu.sasl | 34 ++ b/vnc-auth-sasl.c | 626 ++++++++++++++++++++++++++++++++++++++++++++++++++++ b/vnc-auth-sasl.h | 67 +++++ configure | 34 ++ qemu-doc.texi | 97 ++++++++ vnc-auth-vencrypt.c | 12 vnc.c | 249 ++++++++++++++++++-- vnc.h | 31 ++ 10 files changed, 1129 insertions(+), 33 deletions(-) Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6724 c046a42c-6fe2-441c-8c8c-71466251a162
2009-03-06 21:27:28 +01:00
}
/* Whether auth is complete */
vnc_write_u8(vs, err == SASL_CONTINUE ? 0 : 1);
if (err == SASL_CONTINUE) {
VNC_DEBUG("%s", "Authentication must continue\n");
/* Wait for step length */
vnc_read_when(vs, protocol_client_auth_sasl_step_len, 4);
Add SASL authentication support ("Daniel P. Berrange") This patch adds the new SASL authentication protocol to the VNC server. It is enabled by setting the 'sasl' flag when launching VNC. SASL can optionally provide encryption via its SSF layer, if a suitable mechanism is configured (eg, GSSAPI/Kerberos, or Digest-MD5). If an SSF layer is not available, then it should be combined with the x509 VNC authentication protocol which provides encryption. eg, if using GSSAPI qemu -vnc localhost:1,sasl eg if using TLS/x509 for encryption qemu -vnc localhost:1,sasl,tls,x509 By default the Cyrus SASL library will look for its configuration in the file /etc/sasl2/qemu.conf. For non-root users, this can be overridden by setting the SASL_CONF_PATH environment variable, eg to make it look in $HOME/.sasl2. NB unprivileged users may not have access to the full range of SASL mechanisms, since some of them require some administrative privileges to configure. The patch includes an example SASL configuration file which illustrates config for GSSAPI and Digest-MD5, though it should be noted that the latter is not really considered secure any more. Most of the SASL authentication code is located in a separate source file, vnc-auth-sasl.c. The main vnc.c file only contains minimal integration glue, specifically parsing of command line flags / setup, and calls to start the SASL auth process, to do encoding/decoding for data. There are several possible stacks for reading & writing of data, depending on the combo of VNC authentication methods in use - Clear. read/write straight to socket - TLS. read/write via GNUTLS helpers - SASL. encode/decode via SASL SSF layer, then read/write to socket - SASL+TLS. encode/decode via SASL SSF layer, then read/write via GNUTLS Hence, the vnc_client_read & vnc_client_write methods have been refactored a little. vnc_client_read: main entry point for reading, calls either - vnc_client_read_plain reading, with no intermediate decoding - vnc_client_read_sasl reading, with SASL SSF decoding These two methods, then call vnc_client_read_buf(). This decides whether to write to the socket directly or write via GNUTLS. The situation is the same for writing data. More extensive comments have been added in the code / patch. The vnc_client_read_sasl and vnc_client_write_sasl method implementations live in the separate vnc-auth-sasl.c file. The state required for the SASL auth mechanism is kept in a separate VncStateSASL struct, defined in vnc-auth-sasl.h and included in the main VncState. The configure script probes for SASL and automatically enables it if found, unless --disable-vnc-sasl was given to override it. Makefile | 7 Makefile.target | 5 b/qemu.sasl | 34 ++ b/vnc-auth-sasl.c | 626 ++++++++++++++++++++++++++++++++++++++++++++++++++++ b/vnc-auth-sasl.h | 67 +++++ configure | 34 ++ qemu-doc.texi | 97 ++++++++ vnc-auth-vencrypt.c | 12 vnc.c | 249 ++++++++++++++++++-- vnc.h | 31 ++ 10 files changed, 1129 insertions(+), 33 deletions(-) Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6724 c046a42c-6fe2-441c-8c8c-71466251a162
2009-03-06 21:27:28 +01:00
} else {
if (!vnc_auth_sasl_check_ssf(vs)) {
VNC_DEBUG("Authentication rejected for weak SSF %d\n", vs->csock);
goto authreject;
}
/* Check username whitelist ACL */
if (vnc_auth_sasl_check_access(vs) < 0) {
VNC_DEBUG("Authentication rejected for ACL %d\n", vs->csock);
goto authreject;
}
VNC_DEBUG("Authentication successful %d\n", vs->csock);
vnc_write_u32(vs, 0); /* Accept auth */
/*
* Delay writing in SSF encoded mode until pending output
* buffer is written
*/
if (vs->sasl.runSSF)
vs->sasl.waitWriteSSF = vs->output.offset;
start_client_init(vs);
Add SASL authentication support ("Daniel P. Berrange") This patch adds the new SASL authentication protocol to the VNC server. It is enabled by setting the 'sasl' flag when launching VNC. SASL can optionally provide encryption via its SSF layer, if a suitable mechanism is configured (eg, GSSAPI/Kerberos, or Digest-MD5). If an SSF layer is not available, then it should be combined with the x509 VNC authentication protocol which provides encryption. eg, if using GSSAPI qemu -vnc localhost:1,sasl eg if using TLS/x509 for encryption qemu -vnc localhost:1,sasl,tls,x509 By default the Cyrus SASL library will look for its configuration in the file /etc/sasl2/qemu.conf. For non-root users, this can be overridden by setting the SASL_CONF_PATH environment variable, eg to make it look in $HOME/.sasl2. NB unprivileged users may not have access to the full range of SASL mechanisms, since some of them require some administrative privileges to configure. The patch includes an example SASL configuration file which illustrates config for GSSAPI and Digest-MD5, though it should be noted that the latter is not really considered secure any more. Most of the SASL authentication code is located in a separate source file, vnc-auth-sasl.c. The main vnc.c file only contains minimal integration glue, specifically parsing of command line flags / setup, and calls to start the SASL auth process, to do encoding/decoding for data. There are several possible stacks for reading & writing of data, depending on the combo of VNC authentication methods in use - Clear. read/write straight to socket - TLS. read/write via GNUTLS helpers - SASL. encode/decode via SASL SSF layer, then read/write to socket - SASL+TLS. encode/decode via SASL SSF layer, then read/write via GNUTLS Hence, the vnc_client_read & vnc_client_write methods have been refactored a little. vnc_client_read: main entry point for reading, calls either - vnc_client_read_plain reading, with no intermediate decoding - vnc_client_read_sasl reading, with SASL SSF decoding These two methods, then call vnc_client_read_buf(). This decides whether to write to the socket directly or write via GNUTLS. The situation is the same for writing data. More extensive comments have been added in the code / patch. The vnc_client_read_sasl and vnc_client_write_sasl method implementations live in the separate vnc-auth-sasl.c file. The state required for the SASL auth mechanism is kept in a separate VncStateSASL struct, defined in vnc-auth-sasl.h and included in the main VncState. The configure script probes for SASL and automatically enables it if found, unless --disable-vnc-sasl was given to override it. Makefile | 7 Makefile.target | 5 b/qemu.sasl | 34 ++ b/vnc-auth-sasl.c | 626 ++++++++++++++++++++++++++++++++++++++++++++++++++++ b/vnc-auth-sasl.h | 67 +++++ configure | 34 ++ qemu-doc.texi | 97 ++++++++ vnc-auth-vencrypt.c | 12 vnc.c | 249 ++++++++++++++++++-- vnc.h | 31 ++ 10 files changed, 1129 insertions(+), 33 deletions(-) Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6724 c046a42c-6fe2-441c-8c8c-71466251a162
2009-03-06 21:27:28 +01:00
}
return 0;
authreject:
vnc_write_u32(vs, 1); /* Reject auth */
vnc_write_u32(vs, sizeof("Authentication failed"));
vnc_write(vs, "Authentication failed", sizeof("Authentication failed"));
vnc_flush(vs);
vnc_client_error(vs);
return -1;
authabort:
vnc_client_error(vs);
return -1;
}
static int protocol_client_auth_sasl_step_len(VncState *vs, uint8_t *data, size_t len)
{
uint32_t steplen = read_u32(data, 0);
VNC_DEBUG("Got client step len %d\n", steplen);
if (steplen > SASL_DATA_MAX_LEN) {
VNC_DEBUG("Too much SASL data %d\n", steplen);
vnc_client_error(vs);
return -1;
Add SASL authentication support ("Daniel P. Berrange") This patch adds the new SASL authentication protocol to the VNC server. It is enabled by setting the 'sasl' flag when launching VNC. SASL can optionally provide encryption via its SSF layer, if a suitable mechanism is configured (eg, GSSAPI/Kerberos, or Digest-MD5). If an SSF layer is not available, then it should be combined with the x509 VNC authentication protocol which provides encryption. eg, if using GSSAPI qemu -vnc localhost:1,sasl eg if using TLS/x509 for encryption qemu -vnc localhost:1,sasl,tls,x509 By default the Cyrus SASL library will look for its configuration in the file /etc/sasl2/qemu.conf. For non-root users, this can be overridden by setting the SASL_CONF_PATH environment variable, eg to make it look in $HOME/.sasl2. NB unprivileged users may not have access to the full range of SASL mechanisms, since some of them require some administrative privileges to configure. The patch includes an example SASL configuration file which illustrates config for GSSAPI and Digest-MD5, though it should be noted that the latter is not really considered secure any more. Most of the SASL authentication code is located in a separate source file, vnc-auth-sasl.c. The main vnc.c file only contains minimal integration glue, specifically parsing of command line flags / setup, and calls to start the SASL auth process, to do encoding/decoding for data. There are several possible stacks for reading & writing of data, depending on the combo of VNC authentication methods in use - Clear. read/write straight to socket - TLS. read/write via GNUTLS helpers - SASL. encode/decode via SASL SSF layer, then read/write to socket - SASL+TLS. encode/decode via SASL SSF layer, then read/write via GNUTLS Hence, the vnc_client_read & vnc_client_write methods have been refactored a little. vnc_client_read: main entry point for reading, calls either - vnc_client_read_plain reading, with no intermediate decoding - vnc_client_read_sasl reading, with SASL SSF decoding These two methods, then call vnc_client_read_buf(). This decides whether to write to the socket directly or write via GNUTLS. The situation is the same for writing data. More extensive comments have been added in the code / patch. The vnc_client_read_sasl and vnc_client_write_sasl method implementations live in the separate vnc-auth-sasl.c file. The state required for the SASL auth mechanism is kept in a separate VncStateSASL struct, defined in vnc-auth-sasl.h and included in the main VncState. The configure script probes for SASL and automatically enables it if found, unless --disable-vnc-sasl was given to override it. Makefile | 7 Makefile.target | 5 b/qemu.sasl | 34 ++ b/vnc-auth-sasl.c | 626 ++++++++++++++++++++++++++++++++++++++++++++++++++++ b/vnc-auth-sasl.h | 67 +++++ configure | 34 ++ qemu-doc.texi | 97 ++++++++ vnc-auth-vencrypt.c | 12 vnc.c | 249 ++++++++++++++++++-- vnc.h | 31 ++ 10 files changed, 1129 insertions(+), 33 deletions(-) Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6724 c046a42c-6fe2-441c-8c8c-71466251a162
2009-03-06 21:27:28 +01:00
}
if (steplen == 0)
return protocol_client_auth_sasl_step(vs, NULL, 0);
Add SASL authentication support ("Daniel P. Berrange") This patch adds the new SASL authentication protocol to the VNC server. It is enabled by setting the 'sasl' flag when launching VNC. SASL can optionally provide encryption via its SSF layer, if a suitable mechanism is configured (eg, GSSAPI/Kerberos, or Digest-MD5). If an SSF layer is not available, then it should be combined with the x509 VNC authentication protocol which provides encryption. eg, if using GSSAPI qemu -vnc localhost:1,sasl eg if using TLS/x509 for encryption qemu -vnc localhost:1,sasl,tls,x509 By default the Cyrus SASL library will look for its configuration in the file /etc/sasl2/qemu.conf. For non-root users, this can be overridden by setting the SASL_CONF_PATH environment variable, eg to make it look in $HOME/.sasl2. NB unprivileged users may not have access to the full range of SASL mechanisms, since some of them require some administrative privileges to configure. The patch includes an example SASL configuration file which illustrates config for GSSAPI and Digest-MD5, though it should be noted that the latter is not really considered secure any more. Most of the SASL authentication code is located in a separate source file, vnc-auth-sasl.c. The main vnc.c file only contains minimal integration glue, specifically parsing of command line flags / setup, and calls to start the SASL auth process, to do encoding/decoding for data. There are several possible stacks for reading & writing of data, depending on the combo of VNC authentication methods in use - Clear. read/write straight to socket - TLS. read/write via GNUTLS helpers - SASL. encode/decode via SASL SSF layer, then read/write to socket - SASL+TLS. encode/decode via SASL SSF layer, then read/write via GNUTLS Hence, the vnc_client_read & vnc_client_write methods have been refactored a little. vnc_client_read: main entry point for reading, calls either - vnc_client_read_plain reading, with no intermediate decoding - vnc_client_read_sasl reading, with SASL SSF decoding These two methods, then call vnc_client_read_buf(). This decides whether to write to the socket directly or write via GNUTLS. The situation is the same for writing data. More extensive comments have been added in the code / patch. The vnc_client_read_sasl and vnc_client_write_sasl method implementations live in the separate vnc-auth-sasl.c file. The state required for the SASL auth mechanism is kept in a separate VncStateSASL struct, defined in vnc-auth-sasl.h and included in the main VncState. The configure script probes for SASL and automatically enables it if found, unless --disable-vnc-sasl was given to override it. Makefile | 7 Makefile.target | 5 b/qemu.sasl | 34 ++ b/vnc-auth-sasl.c | 626 ++++++++++++++++++++++++++++++++++++++++++++++++++++ b/vnc-auth-sasl.h | 67 +++++ configure | 34 ++ qemu-doc.texi | 97 ++++++++ vnc-auth-vencrypt.c | 12 vnc.c | 249 ++++++++++++++++++-- vnc.h | 31 ++ 10 files changed, 1129 insertions(+), 33 deletions(-) Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6724 c046a42c-6fe2-441c-8c8c-71466251a162
2009-03-06 21:27:28 +01:00
else
vnc_read_when(vs, protocol_client_auth_sasl_step, steplen);
Add SASL authentication support ("Daniel P. Berrange") This patch adds the new SASL authentication protocol to the VNC server. It is enabled by setting the 'sasl' flag when launching VNC. SASL can optionally provide encryption via its SSF layer, if a suitable mechanism is configured (eg, GSSAPI/Kerberos, or Digest-MD5). If an SSF layer is not available, then it should be combined with the x509 VNC authentication protocol which provides encryption. eg, if using GSSAPI qemu -vnc localhost:1,sasl eg if using TLS/x509 for encryption qemu -vnc localhost:1,sasl,tls,x509 By default the Cyrus SASL library will look for its configuration in the file /etc/sasl2/qemu.conf. For non-root users, this can be overridden by setting the SASL_CONF_PATH environment variable, eg to make it look in $HOME/.sasl2. NB unprivileged users may not have access to the full range of SASL mechanisms, since some of them require some administrative privileges to configure. The patch includes an example SASL configuration file which illustrates config for GSSAPI and Digest-MD5, though it should be noted that the latter is not really considered secure any more. Most of the SASL authentication code is located in a separate source file, vnc-auth-sasl.c. The main vnc.c file only contains minimal integration glue, specifically parsing of command line flags / setup, and calls to start the SASL auth process, to do encoding/decoding for data. There are several possible stacks for reading & writing of data, depending on the combo of VNC authentication methods in use - Clear. read/write straight to socket - TLS. read/write via GNUTLS helpers - SASL. encode/decode via SASL SSF layer, then read/write to socket - SASL+TLS. encode/decode via SASL SSF layer, then read/write via GNUTLS Hence, the vnc_client_read & vnc_client_write methods have been refactored a little. vnc_client_read: main entry point for reading, calls either - vnc_client_read_plain reading, with no intermediate decoding - vnc_client_read_sasl reading, with SASL SSF decoding These two methods, then call vnc_client_read_buf(). This decides whether to write to the socket directly or write via GNUTLS. The situation is the same for writing data. More extensive comments have been added in the code / patch. The vnc_client_read_sasl and vnc_client_write_sasl method implementations live in the separate vnc-auth-sasl.c file. The state required for the SASL auth mechanism is kept in a separate VncStateSASL struct, defined in vnc-auth-sasl.h and included in the main VncState. The configure script probes for SASL and automatically enables it if found, unless --disable-vnc-sasl was given to override it. Makefile | 7 Makefile.target | 5 b/qemu.sasl | 34 ++ b/vnc-auth-sasl.c | 626 ++++++++++++++++++++++++++++++++++++++++++++++++++++ b/vnc-auth-sasl.h | 67 +++++ configure | 34 ++ qemu-doc.texi | 97 ++++++++ vnc-auth-vencrypt.c | 12 vnc.c | 249 ++++++++++++++++++-- vnc.h | 31 ++ 10 files changed, 1129 insertions(+), 33 deletions(-) Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6724 c046a42c-6fe2-441c-8c8c-71466251a162
2009-03-06 21:27:28 +01:00
return 0;
}
/*
* Start Msg
*
* Input from client:
*
* u32 clientin-length
* u8-array clientin-string
*
* Output to client:
*
* u32 serverout-length
* u8-array serverout-strin
* u8 continue
*/
#define SASL_DATA_MAX_LEN (1024 * 1024)
static int protocol_client_auth_sasl_start(VncState *vs, uint8_t *data, size_t len)
{
uint32_t datalen = len;
const char *serverout;
unsigned int serveroutlen;
int err;
char *clientdata = NULL;
/* NB, distinction of NULL vs "" is *critical* in SASL */
if (datalen) {
clientdata = (char*)data;
clientdata[datalen-1] = '\0'; /* Should be on wire, but make sure */
datalen--; /* Don't count NULL byte when passing to _start() */
Add SASL authentication support ("Daniel P. Berrange") This patch adds the new SASL authentication protocol to the VNC server. It is enabled by setting the 'sasl' flag when launching VNC. SASL can optionally provide encryption via its SSF layer, if a suitable mechanism is configured (eg, GSSAPI/Kerberos, or Digest-MD5). If an SSF layer is not available, then it should be combined with the x509 VNC authentication protocol which provides encryption. eg, if using GSSAPI qemu -vnc localhost:1,sasl eg if using TLS/x509 for encryption qemu -vnc localhost:1,sasl,tls,x509 By default the Cyrus SASL library will look for its configuration in the file /etc/sasl2/qemu.conf. For non-root users, this can be overridden by setting the SASL_CONF_PATH environment variable, eg to make it look in $HOME/.sasl2. NB unprivileged users may not have access to the full range of SASL mechanisms, since some of them require some administrative privileges to configure. The patch includes an example SASL configuration file which illustrates config for GSSAPI and Digest-MD5, though it should be noted that the latter is not really considered secure any more. Most of the SASL authentication code is located in a separate source file, vnc-auth-sasl.c. The main vnc.c file only contains minimal integration glue, specifically parsing of command line flags / setup, and calls to start the SASL auth process, to do encoding/decoding for data. There are several possible stacks for reading & writing of data, depending on the combo of VNC authentication methods in use - Clear. read/write straight to socket - TLS. read/write via GNUTLS helpers - SASL. encode/decode via SASL SSF layer, then read/write to socket - SASL+TLS. encode/decode via SASL SSF layer, then read/write via GNUTLS Hence, the vnc_client_read & vnc_client_write methods have been refactored a little. vnc_client_read: main entry point for reading, calls either - vnc_client_read_plain reading, with no intermediate decoding - vnc_client_read_sasl reading, with SASL SSF decoding These two methods, then call vnc_client_read_buf(). This decides whether to write to the socket directly or write via GNUTLS. The situation is the same for writing data. More extensive comments have been added in the code / patch. The vnc_client_read_sasl and vnc_client_write_sasl method implementations live in the separate vnc-auth-sasl.c file. The state required for the SASL auth mechanism is kept in a separate VncStateSASL struct, defined in vnc-auth-sasl.h and included in the main VncState. The configure script probes for SASL and automatically enables it if found, unless --disable-vnc-sasl was given to override it. Makefile | 7 Makefile.target | 5 b/qemu.sasl | 34 ++ b/vnc-auth-sasl.c | 626 ++++++++++++++++++++++++++++++++++++++++++++++++++++ b/vnc-auth-sasl.h | 67 +++++ configure | 34 ++ qemu-doc.texi | 97 ++++++++ vnc-auth-vencrypt.c | 12 vnc.c | 249 ++++++++++++++++++-- vnc.h | 31 ++ 10 files changed, 1129 insertions(+), 33 deletions(-) Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6724 c046a42c-6fe2-441c-8c8c-71466251a162
2009-03-06 21:27:28 +01:00
}
VNC_DEBUG("Start SASL auth with mechanism %s. Data %p (%d bytes)\n",
vs->sasl.mechlist, clientdata, datalen);
Add SASL authentication support ("Daniel P. Berrange") This patch adds the new SASL authentication protocol to the VNC server. It is enabled by setting the 'sasl' flag when launching VNC. SASL can optionally provide encryption via its SSF layer, if a suitable mechanism is configured (eg, GSSAPI/Kerberos, or Digest-MD5). If an SSF layer is not available, then it should be combined with the x509 VNC authentication protocol which provides encryption. eg, if using GSSAPI qemu -vnc localhost:1,sasl eg if using TLS/x509 for encryption qemu -vnc localhost:1,sasl,tls,x509 By default the Cyrus SASL library will look for its configuration in the file /etc/sasl2/qemu.conf. For non-root users, this can be overridden by setting the SASL_CONF_PATH environment variable, eg to make it look in $HOME/.sasl2. NB unprivileged users may not have access to the full range of SASL mechanisms, since some of them require some administrative privileges to configure. The patch includes an example SASL configuration file which illustrates config for GSSAPI and Digest-MD5, though it should be noted that the latter is not really considered secure any more. Most of the SASL authentication code is located in a separate source file, vnc-auth-sasl.c. The main vnc.c file only contains minimal integration glue, specifically parsing of command line flags / setup, and calls to start the SASL auth process, to do encoding/decoding for data. There are several possible stacks for reading & writing of data, depending on the combo of VNC authentication methods in use - Clear. read/write straight to socket - TLS. read/write via GNUTLS helpers - SASL. encode/decode via SASL SSF layer, then read/write to socket - SASL+TLS. encode/decode via SASL SSF layer, then read/write via GNUTLS Hence, the vnc_client_read & vnc_client_write methods have been refactored a little. vnc_client_read: main entry point for reading, calls either - vnc_client_read_plain reading, with no intermediate decoding - vnc_client_read_sasl reading, with SASL SSF decoding These two methods, then call vnc_client_read_buf(). This decides whether to write to the socket directly or write via GNUTLS. The situation is the same for writing data. More extensive comments have been added in the code / patch. The vnc_client_read_sasl and vnc_client_write_sasl method implementations live in the separate vnc-auth-sasl.c file. The state required for the SASL auth mechanism is kept in a separate VncStateSASL struct, defined in vnc-auth-sasl.h and included in the main VncState. The configure script probes for SASL and automatically enables it if found, unless --disable-vnc-sasl was given to override it. Makefile | 7 Makefile.target | 5 b/qemu.sasl | 34 ++ b/vnc-auth-sasl.c | 626 ++++++++++++++++++++++++++++++++++++++++++++++++++++ b/vnc-auth-sasl.h | 67 +++++ configure | 34 ++ qemu-doc.texi | 97 ++++++++ vnc-auth-vencrypt.c | 12 vnc.c | 249 ++++++++++++++++++-- vnc.h | 31 ++ 10 files changed, 1129 insertions(+), 33 deletions(-) Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6724 c046a42c-6fe2-441c-8c8c-71466251a162
2009-03-06 21:27:28 +01:00
err = sasl_server_start(vs->sasl.conn,
vs->sasl.mechlist,
clientdata,
datalen,
&serverout,
&serveroutlen);
Add SASL authentication support ("Daniel P. Berrange") This patch adds the new SASL authentication protocol to the VNC server. It is enabled by setting the 'sasl' flag when launching VNC. SASL can optionally provide encryption via its SSF layer, if a suitable mechanism is configured (eg, GSSAPI/Kerberos, or Digest-MD5). If an SSF layer is not available, then it should be combined with the x509 VNC authentication protocol which provides encryption. eg, if using GSSAPI qemu -vnc localhost:1,sasl eg if using TLS/x509 for encryption qemu -vnc localhost:1,sasl,tls,x509 By default the Cyrus SASL library will look for its configuration in the file /etc/sasl2/qemu.conf. For non-root users, this can be overridden by setting the SASL_CONF_PATH environment variable, eg to make it look in $HOME/.sasl2. NB unprivileged users may not have access to the full range of SASL mechanisms, since some of them require some administrative privileges to configure. The patch includes an example SASL configuration file which illustrates config for GSSAPI and Digest-MD5, though it should be noted that the latter is not really considered secure any more. Most of the SASL authentication code is located in a separate source file, vnc-auth-sasl.c. The main vnc.c file only contains minimal integration glue, specifically parsing of command line flags / setup, and calls to start the SASL auth process, to do encoding/decoding for data. There are several possible stacks for reading & writing of data, depending on the combo of VNC authentication methods in use - Clear. read/write straight to socket - TLS. read/write via GNUTLS helpers - SASL. encode/decode via SASL SSF layer, then read/write to socket - SASL+TLS. encode/decode via SASL SSF layer, then read/write via GNUTLS Hence, the vnc_client_read & vnc_client_write methods have been refactored a little. vnc_client_read: main entry point for reading, calls either - vnc_client_read_plain reading, with no intermediate decoding - vnc_client_read_sasl reading, with SASL SSF decoding These two methods, then call vnc_client_read_buf(). This decides whether to write to the socket directly or write via GNUTLS. The situation is the same for writing data. More extensive comments have been added in the code / patch. The vnc_client_read_sasl and vnc_client_write_sasl method implementations live in the separate vnc-auth-sasl.c file. The state required for the SASL auth mechanism is kept in a separate VncStateSASL struct, defined in vnc-auth-sasl.h and included in the main VncState. The configure script probes for SASL and automatically enables it if found, unless --disable-vnc-sasl was given to override it. Makefile | 7 Makefile.target | 5 b/qemu.sasl | 34 ++ b/vnc-auth-sasl.c | 626 ++++++++++++++++++++++++++++++++++++++++++++++++++++ b/vnc-auth-sasl.h | 67 +++++ configure | 34 ++ qemu-doc.texi | 97 ++++++++ vnc-auth-vencrypt.c | 12 vnc.c | 249 ++++++++++++++++++-- vnc.h | 31 ++ 10 files changed, 1129 insertions(+), 33 deletions(-) Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6724 c046a42c-6fe2-441c-8c8c-71466251a162
2009-03-06 21:27:28 +01:00
if (err != SASL_OK &&
err != SASL_CONTINUE) {
VNC_DEBUG("sasl start failed %d (%s)\n",
err, sasl_errdetail(vs->sasl.conn));
sasl_dispose(&vs->sasl.conn);
vs->sasl.conn = NULL;
goto authabort;
Add SASL authentication support ("Daniel P. Berrange") This patch adds the new SASL authentication protocol to the VNC server. It is enabled by setting the 'sasl' flag when launching VNC. SASL can optionally provide encryption via its SSF layer, if a suitable mechanism is configured (eg, GSSAPI/Kerberos, or Digest-MD5). If an SSF layer is not available, then it should be combined with the x509 VNC authentication protocol which provides encryption. eg, if using GSSAPI qemu -vnc localhost:1,sasl eg if using TLS/x509 for encryption qemu -vnc localhost:1,sasl,tls,x509 By default the Cyrus SASL library will look for its configuration in the file /etc/sasl2/qemu.conf. For non-root users, this can be overridden by setting the SASL_CONF_PATH environment variable, eg to make it look in $HOME/.sasl2. NB unprivileged users may not have access to the full range of SASL mechanisms, since some of them require some administrative privileges to configure. The patch includes an example SASL configuration file which illustrates config for GSSAPI and Digest-MD5, though it should be noted that the latter is not really considered secure any more. Most of the SASL authentication code is located in a separate source file, vnc-auth-sasl.c. The main vnc.c file only contains minimal integration glue, specifically parsing of command line flags / setup, and calls to start the SASL auth process, to do encoding/decoding for data. There are several possible stacks for reading & writing of data, depending on the combo of VNC authentication methods in use - Clear. read/write straight to socket - TLS. read/write via GNUTLS helpers - SASL. encode/decode via SASL SSF layer, then read/write to socket - SASL+TLS. encode/decode via SASL SSF layer, then read/write via GNUTLS Hence, the vnc_client_read & vnc_client_write methods have been refactored a little. vnc_client_read: main entry point for reading, calls either - vnc_client_read_plain reading, with no intermediate decoding - vnc_client_read_sasl reading, with SASL SSF decoding These two methods, then call vnc_client_read_buf(). This decides whether to write to the socket directly or write via GNUTLS. The situation is the same for writing data. More extensive comments have been added in the code / patch. The vnc_client_read_sasl and vnc_client_write_sasl method implementations live in the separate vnc-auth-sasl.c file. The state required for the SASL auth mechanism is kept in a separate VncStateSASL struct, defined in vnc-auth-sasl.h and included in the main VncState. The configure script probes for SASL and automatically enables it if found, unless --disable-vnc-sasl was given to override it. Makefile | 7 Makefile.target | 5 b/qemu.sasl | 34 ++ b/vnc-auth-sasl.c | 626 ++++++++++++++++++++++++++++++++++++++++++++++++++++ b/vnc-auth-sasl.h | 67 +++++ configure | 34 ++ qemu-doc.texi | 97 ++++++++ vnc-auth-vencrypt.c | 12 vnc.c | 249 ++++++++++++++++++-- vnc.h | 31 ++ 10 files changed, 1129 insertions(+), 33 deletions(-) Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6724 c046a42c-6fe2-441c-8c8c-71466251a162
2009-03-06 21:27:28 +01:00
}
if (serveroutlen > SASL_DATA_MAX_LEN) {
VNC_DEBUG("sasl start reply data too long %d\n",
serveroutlen);
sasl_dispose(&vs->sasl.conn);
vs->sasl.conn = NULL;
goto authabort;
Add SASL authentication support ("Daniel P. Berrange") This patch adds the new SASL authentication protocol to the VNC server. It is enabled by setting the 'sasl' flag when launching VNC. SASL can optionally provide encryption via its SSF layer, if a suitable mechanism is configured (eg, GSSAPI/Kerberos, or Digest-MD5). If an SSF layer is not available, then it should be combined with the x509 VNC authentication protocol which provides encryption. eg, if using GSSAPI qemu -vnc localhost:1,sasl eg if using TLS/x509 for encryption qemu -vnc localhost:1,sasl,tls,x509 By default the Cyrus SASL library will look for its configuration in the file /etc/sasl2/qemu.conf. For non-root users, this can be overridden by setting the SASL_CONF_PATH environment variable, eg to make it look in $HOME/.sasl2. NB unprivileged users may not have access to the full range of SASL mechanisms, since some of them require some administrative privileges to configure. The patch includes an example SASL configuration file which illustrates config for GSSAPI and Digest-MD5, though it should be noted that the latter is not really considered secure any more. Most of the SASL authentication code is located in a separate source file, vnc-auth-sasl.c. The main vnc.c file only contains minimal integration glue, specifically parsing of command line flags / setup, and calls to start the SASL auth process, to do encoding/decoding for data. There are several possible stacks for reading & writing of data, depending on the combo of VNC authentication methods in use - Clear. read/write straight to socket - TLS. read/write via GNUTLS helpers - SASL. encode/decode via SASL SSF layer, then read/write to socket - SASL+TLS. encode/decode via SASL SSF layer, then read/write via GNUTLS Hence, the vnc_client_read & vnc_client_write methods have been refactored a little. vnc_client_read: main entry point for reading, calls either - vnc_client_read_plain reading, with no intermediate decoding - vnc_client_read_sasl reading, with SASL SSF decoding These two methods, then call vnc_client_read_buf(). This decides whether to write to the socket directly or write via GNUTLS. The situation is the same for writing data. More extensive comments have been added in the code / patch. The vnc_client_read_sasl and vnc_client_write_sasl method implementations live in the separate vnc-auth-sasl.c file. The state required for the SASL auth mechanism is kept in a separate VncStateSASL struct, defined in vnc-auth-sasl.h and included in the main VncState. The configure script probes for SASL and automatically enables it if found, unless --disable-vnc-sasl was given to override it. Makefile | 7 Makefile.target | 5 b/qemu.sasl | 34 ++ b/vnc-auth-sasl.c | 626 ++++++++++++++++++++++++++++++++++++++++++++++++++++ b/vnc-auth-sasl.h | 67 +++++ configure | 34 ++ qemu-doc.texi | 97 ++++++++ vnc-auth-vencrypt.c | 12 vnc.c | 249 ++++++++++++++++++-- vnc.h | 31 ++ 10 files changed, 1129 insertions(+), 33 deletions(-) Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6724 c046a42c-6fe2-441c-8c8c-71466251a162
2009-03-06 21:27:28 +01:00
}
VNC_DEBUG("SASL return data %d bytes, nil; %d\n",
serveroutlen, serverout ? 0 : 1);
Add SASL authentication support ("Daniel P. Berrange") This patch adds the new SASL authentication protocol to the VNC server. It is enabled by setting the 'sasl' flag when launching VNC. SASL can optionally provide encryption via its SSF layer, if a suitable mechanism is configured (eg, GSSAPI/Kerberos, or Digest-MD5). If an SSF layer is not available, then it should be combined with the x509 VNC authentication protocol which provides encryption. eg, if using GSSAPI qemu -vnc localhost:1,sasl eg if using TLS/x509 for encryption qemu -vnc localhost:1,sasl,tls,x509 By default the Cyrus SASL library will look for its configuration in the file /etc/sasl2/qemu.conf. For non-root users, this can be overridden by setting the SASL_CONF_PATH environment variable, eg to make it look in $HOME/.sasl2. NB unprivileged users may not have access to the full range of SASL mechanisms, since some of them require some administrative privileges to configure. The patch includes an example SASL configuration file which illustrates config for GSSAPI and Digest-MD5, though it should be noted that the latter is not really considered secure any more. Most of the SASL authentication code is located in a separate source file, vnc-auth-sasl.c. The main vnc.c file only contains minimal integration glue, specifically parsing of command line flags / setup, and calls to start the SASL auth process, to do encoding/decoding for data. There are several possible stacks for reading & writing of data, depending on the combo of VNC authentication methods in use - Clear. read/write straight to socket - TLS. read/write via GNUTLS helpers - SASL. encode/decode via SASL SSF layer, then read/write to socket - SASL+TLS. encode/decode via SASL SSF layer, then read/write via GNUTLS Hence, the vnc_client_read & vnc_client_write methods have been refactored a little. vnc_client_read: main entry point for reading, calls either - vnc_client_read_plain reading, with no intermediate decoding - vnc_client_read_sasl reading, with SASL SSF decoding These two methods, then call vnc_client_read_buf(). This decides whether to write to the socket directly or write via GNUTLS. The situation is the same for writing data. More extensive comments have been added in the code / patch. The vnc_client_read_sasl and vnc_client_write_sasl method implementations live in the separate vnc-auth-sasl.c file. The state required for the SASL auth mechanism is kept in a separate VncStateSASL struct, defined in vnc-auth-sasl.h and included in the main VncState. The configure script probes for SASL and automatically enables it if found, unless --disable-vnc-sasl was given to override it. Makefile | 7 Makefile.target | 5 b/qemu.sasl | 34 ++ b/vnc-auth-sasl.c | 626 ++++++++++++++++++++++++++++++++++++++++++++++++++++ b/vnc-auth-sasl.h | 67 +++++ configure | 34 ++ qemu-doc.texi | 97 ++++++++ vnc-auth-vencrypt.c | 12 vnc.c | 249 ++++++++++++++++++-- vnc.h | 31 ++ 10 files changed, 1129 insertions(+), 33 deletions(-) Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6724 c046a42c-6fe2-441c-8c8c-71466251a162
2009-03-06 21:27:28 +01:00
if (serveroutlen) {
vnc_write_u32(vs, serveroutlen + 1);
vnc_write(vs, serverout, serveroutlen + 1);
Add SASL authentication support ("Daniel P. Berrange") This patch adds the new SASL authentication protocol to the VNC server. It is enabled by setting the 'sasl' flag when launching VNC. SASL can optionally provide encryption via its SSF layer, if a suitable mechanism is configured (eg, GSSAPI/Kerberos, or Digest-MD5). If an SSF layer is not available, then it should be combined with the x509 VNC authentication protocol which provides encryption. eg, if using GSSAPI qemu -vnc localhost:1,sasl eg if using TLS/x509 for encryption qemu -vnc localhost:1,sasl,tls,x509 By default the Cyrus SASL library will look for its configuration in the file /etc/sasl2/qemu.conf. For non-root users, this can be overridden by setting the SASL_CONF_PATH environment variable, eg to make it look in $HOME/.sasl2. NB unprivileged users may not have access to the full range of SASL mechanisms, since some of them require some administrative privileges to configure. The patch includes an example SASL configuration file which illustrates config for GSSAPI and Digest-MD5, though it should be noted that the latter is not really considered secure any more. Most of the SASL authentication code is located in a separate source file, vnc-auth-sasl.c. The main vnc.c file only contains minimal integration glue, specifically parsing of command line flags / setup, and calls to start the SASL auth process, to do encoding/decoding for data. There are several possible stacks for reading & writing of data, depending on the combo of VNC authentication methods in use - Clear. read/write straight to socket - TLS. read/write via GNUTLS helpers - SASL. encode/decode via SASL SSF layer, then read/write to socket - SASL+TLS. encode/decode via SASL SSF layer, then read/write via GNUTLS Hence, the vnc_client_read & vnc_client_write methods have been refactored a little. vnc_client_read: main entry point for reading, calls either - vnc_client_read_plain reading, with no intermediate decoding - vnc_client_read_sasl reading, with SASL SSF decoding These two methods, then call vnc_client_read_buf(). This decides whether to write to the socket directly or write via GNUTLS. The situation is the same for writing data. More extensive comments have been added in the code / patch. The vnc_client_read_sasl and vnc_client_write_sasl method implementations live in the separate vnc-auth-sasl.c file. The state required for the SASL auth mechanism is kept in a separate VncStateSASL struct, defined in vnc-auth-sasl.h and included in the main VncState. The configure script probes for SASL and automatically enables it if found, unless --disable-vnc-sasl was given to override it. Makefile | 7 Makefile.target | 5 b/qemu.sasl | 34 ++ b/vnc-auth-sasl.c | 626 ++++++++++++++++++++++++++++++++++++++++++++++++++++ b/vnc-auth-sasl.h | 67 +++++ configure | 34 ++ qemu-doc.texi | 97 ++++++++ vnc-auth-vencrypt.c | 12 vnc.c | 249 ++++++++++++++++++-- vnc.h | 31 ++ 10 files changed, 1129 insertions(+), 33 deletions(-) Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6724 c046a42c-6fe2-441c-8c8c-71466251a162
2009-03-06 21:27:28 +01:00
} else {
vnc_write_u32(vs, 0);
Add SASL authentication support ("Daniel P. Berrange") This patch adds the new SASL authentication protocol to the VNC server. It is enabled by setting the 'sasl' flag when launching VNC. SASL can optionally provide encryption via its SSF layer, if a suitable mechanism is configured (eg, GSSAPI/Kerberos, or Digest-MD5). If an SSF layer is not available, then it should be combined with the x509 VNC authentication protocol which provides encryption. eg, if using GSSAPI qemu -vnc localhost:1,sasl eg if using TLS/x509 for encryption qemu -vnc localhost:1,sasl,tls,x509 By default the Cyrus SASL library will look for its configuration in the file /etc/sasl2/qemu.conf. For non-root users, this can be overridden by setting the SASL_CONF_PATH environment variable, eg to make it look in $HOME/.sasl2. NB unprivileged users may not have access to the full range of SASL mechanisms, since some of them require some administrative privileges to configure. The patch includes an example SASL configuration file which illustrates config for GSSAPI and Digest-MD5, though it should be noted that the latter is not really considered secure any more. Most of the SASL authentication code is located in a separate source file, vnc-auth-sasl.c. The main vnc.c file only contains minimal integration glue, specifically parsing of command line flags / setup, and calls to start the SASL auth process, to do encoding/decoding for data. There are several possible stacks for reading & writing of data, depending on the combo of VNC authentication methods in use - Clear. read/write straight to socket - TLS. read/write via GNUTLS helpers - SASL. encode/decode via SASL SSF layer, then read/write to socket - SASL+TLS. encode/decode via SASL SSF layer, then read/write via GNUTLS Hence, the vnc_client_read & vnc_client_write methods have been refactored a little. vnc_client_read: main entry point for reading, calls either - vnc_client_read_plain reading, with no intermediate decoding - vnc_client_read_sasl reading, with SASL SSF decoding These two methods, then call vnc_client_read_buf(). This decides whether to write to the socket directly or write via GNUTLS. The situation is the same for writing data. More extensive comments have been added in the code / patch. The vnc_client_read_sasl and vnc_client_write_sasl method implementations live in the separate vnc-auth-sasl.c file. The state required for the SASL auth mechanism is kept in a separate VncStateSASL struct, defined in vnc-auth-sasl.h and included in the main VncState. The configure script probes for SASL and automatically enables it if found, unless --disable-vnc-sasl was given to override it. Makefile | 7 Makefile.target | 5 b/qemu.sasl | 34 ++ b/vnc-auth-sasl.c | 626 ++++++++++++++++++++++++++++++++++++++++++++++++++++ b/vnc-auth-sasl.h | 67 +++++ configure | 34 ++ qemu-doc.texi | 97 ++++++++ vnc-auth-vencrypt.c | 12 vnc.c | 249 ++++++++++++++++++-- vnc.h | 31 ++ 10 files changed, 1129 insertions(+), 33 deletions(-) Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6724 c046a42c-6fe2-441c-8c8c-71466251a162
2009-03-06 21:27:28 +01:00
}
/* Whether auth is complete */
vnc_write_u8(vs, err == SASL_CONTINUE ? 0 : 1);
if (err == SASL_CONTINUE) {
VNC_DEBUG("%s", "Authentication must continue\n");
/* Wait for step length */
vnc_read_when(vs, protocol_client_auth_sasl_step_len, 4);
Add SASL authentication support ("Daniel P. Berrange") This patch adds the new SASL authentication protocol to the VNC server. It is enabled by setting the 'sasl' flag when launching VNC. SASL can optionally provide encryption via its SSF layer, if a suitable mechanism is configured (eg, GSSAPI/Kerberos, or Digest-MD5). If an SSF layer is not available, then it should be combined with the x509 VNC authentication protocol which provides encryption. eg, if using GSSAPI qemu -vnc localhost:1,sasl eg if using TLS/x509 for encryption qemu -vnc localhost:1,sasl,tls,x509 By default the Cyrus SASL library will look for its configuration in the file /etc/sasl2/qemu.conf. For non-root users, this can be overridden by setting the SASL_CONF_PATH environment variable, eg to make it look in $HOME/.sasl2. NB unprivileged users may not have access to the full range of SASL mechanisms, since some of them require some administrative privileges to configure. The patch includes an example SASL configuration file which illustrates config for GSSAPI and Digest-MD5, though it should be noted that the latter is not really considered secure any more. Most of the SASL authentication code is located in a separate source file, vnc-auth-sasl.c. The main vnc.c file only contains minimal integration glue, specifically parsing of command line flags / setup, and calls to start the SASL auth process, to do encoding/decoding for data. There are several possible stacks for reading & writing of data, depending on the combo of VNC authentication methods in use - Clear. read/write straight to socket - TLS. read/write via GNUTLS helpers - SASL. encode/decode via SASL SSF layer, then read/write to socket - SASL+TLS. encode/decode via SASL SSF layer, then read/write via GNUTLS Hence, the vnc_client_read & vnc_client_write methods have been refactored a little. vnc_client_read: main entry point for reading, calls either - vnc_client_read_plain reading, with no intermediate decoding - vnc_client_read_sasl reading, with SASL SSF decoding These two methods, then call vnc_client_read_buf(). This decides whether to write to the socket directly or write via GNUTLS. The situation is the same for writing data. More extensive comments have been added in the code / patch. The vnc_client_read_sasl and vnc_client_write_sasl method implementations live in the separate vnc-auth-sasl.c file. The state required for the SASL auth mechanism is kept in a separate VncStateSASL struct, defined in vnc-auth-sasl.h and included in the main VncState. The configure script probes for SASL and automatically enables it if found, unless --disable-vnc-sasl was given to override it. Makefile | 7 Makefile.target | 5 b/qemu.sasl | 34 ++ b/vnc-auth-sasl.c | 626 ++++++++++++++++++++++++++++++++++++++++++++++++++++ b/vnc-auth-sasl.h | 67 +++++ configure | 34 ++ qemu-doc.texi | 97 ++++++++ vnc-auth-vencrypt.c | 12 vnc.c | 249 ++++++++++++++++++-- vnc.h | 31 ++ 10 files changed, 1129 insertions(+), 33 deletions(-) Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6724 c046a42c-6fe2-441c-8c8c-71466251a162
2009-03-06 21:27:28 +01:00
} else {
if (!vnc_auth_sasl_check_ssf(vs)) {
VNC_DEBUG("Authentication rejected for weak SSF %d\n", vs->csock);
goto authreject;
}
/* Check username whitelist ACL */
if (vnc_auth_sasl_check_access(vs) < 0) {
VNC_DEBUG("Authentication rejected for ACL %d\n", vs->csock);
goto authreject;
}
VNC_DEBUG("Authentication successful %d\n", vs->csock);
vnc_write_u32(vs, 0); /* Accept auth */
start_client_init(vs);
Add SASL authentication support ("Daniel P. Berrange") This patch adds the new SASL authentication protocol to the VNC server. It is enabled by setting the 'sasl' flag when launching VNC. SASL can optionally provide encryption via its SSF layer, if a suitable mechanism is configured (eg, GSSAPI/Kerberos, or Digest-MD5). If an SSF layer is not available, then it should be combined with the x509 VNC authentication protocol which provides encryption. eg, if using GSSAPI qemu -vnc localhost:1,sasl eg if using TLS/x509 for encryption qemu -vnc localhost:1,sasl,tls,x509 By default the Cyrus SASL library will look for its configuration in the file /etc/sasl2/qemu.conf. For non-root users, this can be overridden by setting the SASL_CONF_PATH environment variable, eg to make it look in $HOME/.sasl2. NB unprivileged users may not have access to the full range of SASL mechanisms, since some of them require some administrative privileges to configure. The patch includes an example SASL configuration file which illustrates config for GSSAPI and Digest-MD5, though it should be noted that the latter is not really considered secure any more. Most of the SASL authentication code is located in a separate source file, vnc-auth-sasl.c. The main vnc.c file only contains minimal integration glue, specifically parsing of command line flags / setup, and calls to start the SASL auth process, to do encoding/decoding for data. There are several possible stacks for reading & writing of data, depending on the combo of VNC authentication methods in use - Clear. read/write straight to socket - TLS. read/write via GNUTLS helpers - SASL. encode/decode via SASL SSF layer, then read/write to socket - SASL+TLS. encode/decode via SASL SSF layer, then read/write via GNUTLS Hence, the vnc_client_read & vnc_client_write methods have been refactored a little. vnc_client_read: main entry point for reading, calls either - vnc_client_read_plain reading, with no intermediate decoding - vnc_client_read_sasl reading, with SASL SSF decoding These two methods, then call vnc_client_read_buf(). This decides whether to write to the socket directly or write via GNUTLS. The situation is the same for writing data. More extensive comments have been added in the code / patch. The vnc_client_read_sasl and vnc_client_write_sasl method implementations live in the separate vnc-auth-sasl.c file. The state required for the SASL auth mechanism is kept in a separate VncStateSASL struct, defined in vnc-auth-sasl.h and included in the main VncState. The configure script probes for SASL and automatically enables it if found, unless --disable-vnc-sasl was given to override it. Makefile | 7 Makefile.target | 5 b/qemu.sasl | 34 ++ b/vnc-auth-sasl.c | 626 ++++++++++++++++++++++++++++++++++++++++++++++++++++ b/vnc-auth-sasl.h | 67 +++++ configure | 34 ++ qemu-doc.texi | 97 ++++++++ vnc-auth-vencrypt.c | 12 vnc.c | 249 ++++++++++++++++++-- vnc.h | 31 ++ 10 files changed, 1129 insertions(+), 33 deletions(-) Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6724 c046a42c-6fe2-441c-8c8c-71466251a162
2009-03-06 21:27:28 +01:00
}
return 0;
authreject:
vnc_write_u32(vs, 1); /* Reject auth */
vnc_write_u32(vs, sizeof("Authentication failed"));
vnc_write(vs, "Authentication failed", sizeof("Authentication failed"));
vnc_flush(vs);
vnc_client_error(vs);
return -1;
authabort:
vnc_client_error(vs);
return -1;
}
static int protocol_client_auth_sasl_start_len(VncState *vs, uint8_t *data, size_t len)
{
uint32_t startlen = read_u32(data, 0);
VNC_DEBUG("Got client start len %d\n", startlen);
if (startlen > SASL_DATA_MAX_LEN) {
VNC_DEBUG("Too much SASL data %d\n", startlen);
vnc_client_error(vs);
return -1;
Add SASL authentication support ("Daniel P. Berrange") This patch adds the new SASL authentication protocol to the VNC server. It is enabled by setting the 'sasl' flag when launching VNC. SASL can optionally provide encryption via its SSF layer, if a suitable mechanism is configured (eg, GSSAPI/Kerberos, or Digest-MD5). If an SSF layer is not available, then it should be combined with the x509 VNC authentication protocol which provides encryption. eg, if using GSSAPI qemu -vnc localhost:1,sasl eg if using TLS/x509 for encryption qemu -vnc localhost:1,sasl,tls,x509 By default the Cyrus SASL library will look for its configuration in the file /etc/sasl2/qemu.conf. For non-root users, this can be overridden by setting the SASL_CONF_PATH environment variable, eg to make it look in $HOME/.sasl2. NB unprivileged users may not have access to the full range of SASL mechanisms, since some of them require some administrative privileges to configure. The patch includes an example SASL configuration file which illustrates config for GSSAPI and Digest-MD5, though it should be noted that the latter is not really considered secure any more. Most of the SASL authentication code is located in a separate source file, vnc-auth-sasl.c. The main vnc.c file only contains minimal integration glue, specifically parsing of command line flags / setup, and calls to start the SASL auth process, to do encoding/decoding for data. There are several possible stacks for reading & writing of data, depending on the combo of VNC authentication methods in use - Clear. read/write straight to socket - TLS. read/write via GNUTLS helpers - SASL. encode/decode via SASL SSF layer, then read/write to socket - SASL+TLS. encode/decode via SASL SSF layer, then read/write via GNUTLS Hence, the vnc_client_read & vnc_client_write methods have been refactored a little. vnc_client_read: main entry point for reading, calls either - vnc_client_read_plain reading, with no intermediate decoding - vnc_client_read_sasl reading, with SASL SSF decoding These two methods, then call vnc_client_read_buf(). This decides whether to write to the socket directly or write via GNUTLS. The situation is the same for writing data. More extensive comments have been added in the code / patch. The vnc_client_read_sasl and vnc_client_write_sasl method implementations live in the separate vnc-auth-sasl.c file. The state required for the SASL auth mechanism is kept in a separate VncStateSASL struct, defined in vnc-auth-sasl.h and included in the main VncState. The configure script probes for SASL and automatically enables it if found, unless --disable-vnc-sasl was given to override it. Makefile | 7 Makefile.target | 5 b/qemu.sasl | 34 ++ b/vnc-auth-sasl.c | 626 ++++++++++++++++++++++++++++++++++++++++++++++++++++ b/vnc-auth-sasl.h | 67 +++++ configure | 34 ++ qemu-doc.texi | 97 ++++++++ vnc-auth-vencrypt.c | 12 vnc.c | 249 ++++++++++++++++++-- vnc.h | 31 ++ 10 files changed, 1129 insertions(+), 33 deletions(-) Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6724 c046a42c-6fe2-441c-8c8c-71466251a162
2009-03-06 21:27:28 +01:00
}
if (startlen == 0)
return protocol_client_auth_sasl_start(vs, NULL, 0);
Add SASL authentication support ("Daniel P. Berrange") This patch adds the new SASL authentication protocol to the VNC server. It is enabled by setting the 'sasl' flag when launching VNC. SASL can optionally provide encryption via its SSF layer, if a suitable mechanism is configured (eg, GSSAPI/Kerberos, or Digest-MD5). If an SSF layer is not available, then it should be combined with the x509 VNC authentication protocol which provides encryption. eg, if using GSSAPI qemu -vnc localhost:1,sasl eg if using TLS/x509 for encryption qemu -vnc localhost:1,sasl,tls,x509 By default the Cyrus SASL library will look for its configuration in the file /etc/sasl2/qemu.conf. For non-root users, this can be overridden by setting the SASL_CONF_PATH environment variable, eg to make it look in $HOME/.sasl2. NB unprivileged users may not have access to the full range of SASL mechanisms, since some of them require some administrative privileges to configure. The patch includes an example SASL configuration file which illustrates config for GSSAPI and Digest-MD5, though it should be noted that the latter is not really considered secure any more. Most of the SASL authentication code is located in a separate source file, vnc-auth-sasl.c. The main vnc.c file only contains minimal integration glue, specifically parsing of command line flags / setup, and calls to start the SASL auth process, to do encoding/decoding for data. There are several possible stacks for reading & writing of data, depending on the combo of VNC authentication methods in use - Clear. read/write straight to socket - TLS. read/write via GNUTLS helpers - SASL. encode/decode via SASL SSF layer, then read/write to socket - SASL+TLS. encode/decode via SASL SSF layer, then read/write via GNUTLS Hence, the vnc_client_read & vnc_client_write methods have been refactored a little. vnc_client_read: main entry point for reading, calls either - vnc_client_read_plain reading, with no intermediate decoding - vnc_client_read_sasl reading, with SASL SSF decoding These two methods, then call vnc_client_read_buf(). This decides whether to write to the socket directly or write via GNUTLS. The situation is the same for writing data. More extensive comments have been added in the code / patch. The vnc_client_read_sasl and vnc_client_write_sasl method implementations live in the separate vnc-auth-sasl.c file. The state required for the SASL auth mechanism is kept in a separate VncStateSASL struct, defined in vnc-auth-sasl.h and included in the main VncState. The configure script probes for SASL and automatically enables it if found, unless --disable-vnc-sasl was given to override it. Makefile | 7 Makefile.target | 5 b/qemu.sasl | 34 ++ b/vnc-auth-sasl.c | 626 ++++++++++++++++++++++++++++++++++++++++++++++++++++ b/vnc-auth-sasl.h | 67 +++++ configure | 34 ++ qemu-doc.texi | 97 ++++++++ vnc-auth-vencrypt.c | 12 vnc.c | 249 ++++++++++++++++++-- vnc.h | 31 ++ 10 files changed, 1129 insertions(+), 33 deletions(-) Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6724 c046a42c-6fe2-441c-8c8c-71466251a162
2009-03-06 21:27:28 +01:00
vnc_read_when(vs, protocol_client_auth_sasl_start, startlen);
return 0;
}
static int protocol_client_auth_sasl_mechname(VncState *vs, uint8_t *data, size_t len)
{
char *mechname = g_strndup((const char *) data, len);
Add SASL authentication support ("Daniel P. Berrange") This patch adds the new SASL authentication protocol to the VNC server. It is enabled by setting the 'sasl' flag when launching VNC. SASL can optionally provide encryption via its SSF layer, if a suitable mechanism is configured (eg, GSSAPI/Kerberos, or Digest-MD5). If an SSF layer is not available, then it should be combined with the x509 VNC authentication protocol which provides encryption. eg, if using GSSAPI qemu -vnc localhost:1,sasl eg if using TLS/x509 for encryption qemu -vnc localhost:1,sasl,tls,x509 By default the Cyrus SASL library will look for its configuration in the file /etc/sasl2/qemu.conf. For non-root users, this can be overridden by setting the SASL_CONF_PATH environment variable, eg to make it look in $HOME/.sasl2. NB unprivileged users may not have access to the full range of SASL mechanisms, since some of them require some administrative privileges to configure. The patch includes an example SASL configuration file which illustrates config for GSSAPI and Digest-MD5, though it should be noted that the latter is not really considered secure any more. Most of the SASL authentication code is located in a separate source file, vnc-auth-sasl.c. The main vnc.c file only contains minimal integration glue, specifically parsing of command line flags / setup, and calls to start the SASL auth process, to do encoding/decoding for data. There are several possible stacks for reading & writing of data, depending on the combo of VNC authentication methods in use - Clear. read/write straight to socket - TLS. read/write via GNUTLS helpers - SASL. encode/decode via SASL SSF layer, then read/write to socket - SASL+TLS. encode/decode via SASL SSF layer, then read/write via GNUTLS Hence, the vnc_client_read & vnc_client_write methods have been refactored a little. vnc_client_read: main entry point for reading, calls either - vnc_client_read_plain reading, with no intermediate decoding - vnc_client_read_sasl reading, with SASL SSF decoding These two methods, then call vnc_client_read_buf(). This decides whether to write to the socket directly or write via GNUTLS. The situation is the same for writing data. More extensive comments have been added in the code / patch. The vnc_client_read_sasl and vnc_client_write_sasl method implementations live in the separate vnc-auth-sasl.c file. The state required for the SASL auth mechanism is kept in a separate VncStateSASL struct, defined in vnc-auth-sasl.h and included in the main VncState. The configure script probes for SASL and automatically enables it if found, unless --disable-vnc-sasl was given to override it. Makefile | 7 Makefile.target | 5 b/qemu.sasl | 34 ++ b/vnc-auth-sasl.c | 626 ++++++++++++++++++++++++++++++++++++++++++++++++++++ b/vnc-auth-sasl.h | 67 +++++ configure | 34 ++ qemu-doc.texi | 97 ++++++++ vnc-auth-vencrypt.c | 12 vnc.c | 249 ++++++++++++++++++-- vnc.h | 31 ++ 10 files changed, 1129 insertions(+), 33 deletions(-) Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6724 c046a42c-6fe2-441c-8c8c-71466251a162
2009-03-06 21:27:28 +01:00
VNC_DEBUG("Got client mechname '%s' check against '%s'\n",
mechname, vs->sasl.mechlist);
Add SASL authentication support ("Daniel P. Berrange") This patch adds the new SASL authentication protocol to the VNC server. It is enabled by setting the 'sasl' flag when launching VNC. SASL can optionally provide encryption via its SSF layer, if a suitable mechanism is configured (eg, GSSAPI/Kerberos, or Digest-MD5). If an SSF layer is not available, then it should be combined with the x509 VNC authentication protocol which provides encryption. eg, if using GSSAPI qemu -vnc localhost:1,sasl eg if using TLS/x509 for encryption qemu -vnc localhost:1,sasl,tls,x509 By default the Cyrus SASL library will look for its configuration in the file /etc/sasl2/qemu.conf. For non-root users, this can be overridden by setting the SASL_CONF_PATH environment variable, eg to make it look in $HOME/.sasl2. NB unprivileged users may not have access to the full range of SASL mechanisms, since some of them require some administrative privileges to configure. The patch includes an example SASL configuration file which illustrates config for GSSAPI and Digest-MD5, though it should be noted that the latter is not really considered secure any more. Most of the SASL authentication code is located in a separate source file, vnc-auth-sasl.c. The main vnc.c file only contains minimal integration glue, specifically parsing of command line flags / setup, and calls to start the SASL auth process, to do encoding/decoding for data. There are several possible stacks for reading & writing of data, depending on the combo of VNC authentication methods in use - Clear. read/write straight to socket - TLS. read/write via GNUTLS helpers - SASL. encode/decode via SASL SSF layer, then read/write to socket - SASL+TLS. encode/decode via SASL SSF layer, then read/write via GNUTLS Hence, the vnc_client_read & vnc_client_write methods have been refactored a little. vnc_client_read: main entry point for reading, calls either - vnc_client_read_plain reading, with no intermediate decoding - vnc_client_read_sasl reading, with SASL SSF decoding These two methods, then call vnc_client_read_buf(). This decides whether to write to the socket directly or write via GNUTLS. The situation is the same for writing data. More extensive comments have been added in the code / patch. The vnc_client_read_sasl and vnc_client_write_sasl method implementations live in the separate vnc-auth-sasl.c file. The state required for the SASL auth mechanism is kept in a separate VncStateSASL struct, defined in vnc-auth-sasl.h and included in the main VncState. The configure script probes for SASL and automatically enables it if found, unless --disable-vnc-sasl was given to override it. Makefile | 7 Makefile.target | 5 b/qemu.sasl | 34 ++ b/vnc-auth-sasl.c | 626 ++++++++++++++++++++++++++++++++++++++++++++++++++++ b/vnc-auth-sasl.h | 67 +++++ configure | 34 ++ qemu-doc.texi | 97 ++++++++ vnc-auth-vencrypt.c | 12 vnc.c | 249 ++++++++++++++++++-- vnc.h | 31 ++ 10 files changed, 1129 insertions(+), 33 deletions(-) Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6724 c046a42c-6fe2-441c-8c8c-71466251a162
2009-03-06 21:27:28 +01:00
if (strncmp(vs->sasl.mechlist, mechname, len) == 0) {
if (vs->sasl.mechlist[len] != '\0' &&
vs->sasl.mechlist[len] != ',') {
VNC_DEBUG("One %d", vs->sasl.mechlist[len]);
goto fail;
}
Add SASL authentication support ("Daniel P. Berrange") This patch adds the new SASL authentication protocol to the VNC server. It is enabled by setting the 'sasl' flag when launching VNC. SASL can optionally provide encryption via its SSF layer, if a suitable mechanism is configured (eg, GSSAPI/Kerberos, or Digest-MD5). If an SSF layer is not available, then it should be combined with the x509 VNC authentication protocol which provides encryption. eg, if using GSSAPI qemu -vnc localhost:1,sasl eg if using TLS/x509 for encryption qemu -vnc localhost:1,sasl,tls,x509 By default the Cyrus SASL library will look for its configuration in the file /etc/sasl2/qemu.conf. For non-root users, this can be overridden by setting the SASL_CONF_PATH environment variable, eg to make it look in $HOME/.sasl2. NB unprivileged users may not have access to the full range of SASL mechanisms, since some of them require some administrative privileges to configure. The patch includes an example SASL configuration file which illustrates config for GSSAPI and Digest-MD5, though it should be noted that the latter is not really considered secure any more. Most of the SASL authentication code is located in a separate source file, vnc-auth-sasl.c. The main vnc.c file only contains minimal integration glue, specifically parsing of command line flags / setup, and calls to start the SASL auth process, to do encoding/decoding for data. There are several possible stacks for reading & writing of data, depending on the combo of VNC authentication methods in use - Clear. read/write straight to socket - TLS. read/write via GNUTLS helpers - SASL. encode/decode via SASL SSF layer, then read/write to socket - SASL+TLS. encode/decode via SASL SSF layer, then read/write via GNUTLS Hence, the vnc_client_read & vnc_client_write methods have been refactored a little. vnc_client_read: main entry point for reading, calls either - vnc_client_read_plain reading, with no intermediate decoding - vnc_client_read_sasl reading, with SASL SSF decoding These two methods, then call vnc_client_read_buf(). This decides whether to write to the socket directly or write via GNUTLS. The situation is the same for writing data. More extensive comments have been added in the code / patch. The vnc_client_read_sasl and vnc_client_write_sasl method implementations live in the separate vnc-auth-sasl.c file. The state required for the SASL auth mechanism is kept in a separate VncStateSASL struct, defined in vnc-auth-sasl.h and included in the main VncState. The configure script probes for SASL and automatically enables it if found, unless --disable-vnc-sasl was given to override it. Makefile | 7 Makefile.target | 5 b/qemu.sasl | 34 ++ b/vnc-auth-sasl.c | 626 ++++++++++++++++++++++++++++++++++++++++++++++++++++ b/vnc-auth-sasl.h | 67 +++++ configure | 34 ++ qemu-doc.texi | 97 ++++++++ vnc-auth-vencrypt.c | 12 vnc.c | 249 ++++++++++++++++++-- vnc.h | 31 ++ 10 files changed, 1129 insertions(+), 33 deletions(-) Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6724 c046a42c-6fe2-441c-8c8c-71466251a162
2009-03-06 21:27:28 +01:00
} else {
char *offset = strstr(vs->sasl.mechlist, mechname);
VNC_DEBUG("Two %p\n", offset);
if (!offset) {
goto fail;
}
VNC_DEBUG("Two '%s'\n", offset);
if (offset[-1] != ',' ||
(offset[len] != '\0'&&
offset[len] != ',')) {
goto fail;
}
Add SASL authentication support ("Daniel P. Berrange") This patch adds the new SASL authentication protocol to the VNC server. It is enabled by setting the 'sasl' flag when launching VNC. SASL can optionally provide encryption via its SSF layer, if a suitable mechanism is configured (eg, GSSAPI/Kerberos, or Digest-MD5). If an SSF layer is not available, then it should be combined with the x509 VNC authentication protocol which provides encryption. eg, if using GSSAPI qemu -vnc localhost:1,sasl eg if using TLS/x509 for encryption qemu -vnc localhost:1,sasl,tls,x509 By default the Cyrus SASL library will look for its configuration in the file /etc/sasl2/qemu.conf. For non-root users, this can be overridden by setting the SASL_CONF_PATH environment variable, eg to make it look in $HOME/.sasl2. NB unprivileged users may not have access to the full range of SASL mechanisms, since some of them require some administrative privileges to configure. The patch includes an example SASL configuration file which illustrates config for GSSAPI and Digest-MD5, though it should be noted that the latter is not really considered secure any more. Most of the SASL authentication code is located in a separate source file, vnc-auth-sasl.c. The main vnc.c file only contains minimal integration glue, specifically parsing of command line flags / setup, and calls to start the SASL auth process, to do encoding/decoding for data. There are several possible stacks for reading & writing of data, depending on the combo of VNC authentication methods in use - Clear. read/write straight to socket - TLS. read/write via GNUTLS helpers - SASL. encode/decode via SASL SSF layer, then read/write to socket - SASL+TLS. encode/decode via SASL SSF layer, then read/write via GNUTLS Hence, the vnc_client_read & vnc_client_write methods have been refactored a little. vnc_client_read: main entry point for reading, calls either - vnc_client_read_plain reading, with no intermediate decoding - vnc_client_read_sasl reading, with SASL SSF decoding These two methods, then call vnc_client_read_buf(). This decides whether to write to the socket directly or write via GNUTLS. The situation is the same for writing data. More extensive comments have been added in the code / patch. The vnc_client_read_sasl and vnc_client_write_sasl method implementations live in the separate vnc-auth-sasl.c file. The state required for the SASL auth mechanism is kept in a separate VncStateSASL struct, defined in vnc-auth-sasl.h and included in the main VncState. The configure script probes for SASL and automatically enables it if found, unless --disable-vnc-sasl was given to override it. Makefile | 7 Makefile.target | 5 b/qemu.sasl | 34 ++ b/vnc-auth-sasl.c | 626 ++++++++++++++++++++++++++++++++++++++++++++++++++++ b/vnc-auth-sasl.h | 67 +++++ configure | 34 ++ qemu-doc.texi | 97 ++++++++ vnc-auth-vencrypt.c | 12 vnc.c | 249 ++++++++++++++++++-- vnc.h | 31 ++ 10 files changed, 1129 insertions(+), 33 deletions(-) Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6724 c046a42c-6fe2-441c-8c8c-71466251a162
2009-03-06 21:27:28 +01:00
}
g_free(vs->sasl.mechlist);
Add SASL authentication support ("Daniel P. Berrange") This patch adds the new SASL authentication protocol to the VNC server. It is enabled by setting the 'sasl' flag when launching VNC. SASL can optionally provide encryption via its SSF layer, if a suitable mechanism is configured (eg, GSSAPI/Kerberos, or Digest-MD5). If an SSF layer is not available, then it should be combined with the x509 VNC authentication protocol which provides encryption. eg, if using GSSAPI qemu -vnc localhost:1,sasl eg if using TLS/x509 for encryption qemu -vnc localhost:1,sasl,tls,x509 By default the Cyrus SASL library will look for its configuration in the file /etc/sasl2/qemu.conf. For non-root users, this can be overridden by setting the SASL_CONF_PATH environment variable, eg to make it look in $HOME/.sasl2. NB unprivileged users may not have access to the full range of SASL mechanisms, since some of them require some administrative privileges to configure. The patch includes an example SASL configuration file which illustrates config for GSSAPI and Digest-MD5, though it should be noted that the latter is not really considered secure any more. Most of the SASL authentication code is located in a separate source file, vnc-auth-sasl.c. The main vnc.c file only contains minimal integration glue, specifically parsing of command line flags / setup, and calls to start the SASL auth process, to do encoding/decoding for data. There are several possible stacks for reading & writing of data, depending on the combo of VNC authentication methods in use - Clear. read/write straight to socket - TLS. read/write via GNUTLS helpers - SASL. encode/decode via SASL SSF layer, then read/write to socket - SASL+TLS. encode/decode via SASL SSF layer, then read/write via GNUTLS Hence, the vnc_client_read & vnc_client_write methods have been refactored a little. vnc_client_read: main entry point for reading, calls either - vnc_client_read_plain reading, with no intermediate decoding - vnc_client_read_sasl reading, with SASL SSF decoding These two methods, then call vnc_client_read_buf(). This decides whether to write to the socket directly or write via GNUTLS. The situation is the same for writing data. More extensive comments have been added in the code / patch. The vnc_client_read_sasl and vnc_client_write_sasl method implementations live in the separate vnc-auth-sasl.c file. The state required for the SASL auth mechanism is kept in a separate VncStateSASL struct, defined in vnc-auth-sasl.h and included in the main VncState. The configure script probes for SASL and automatically enables it if found, unless --disable-vnc-sasl was given to override it. Makefile | 7 Makefile.target | 5 b/qemu.sasl | 34 ++ b/vnc-auth-sasl.c | 626 ++++++++++++++++++++++++++++++++++++++++++++++++++++ b/vnc-auth-sasl.h | 67 +++++ configure | 34 ++ qemu-doc.texi | 97 ++++++++ vnc-auth-vencrypt.c | 12 vnc.c | 249 ++++++++++++++++++-- vnc.h | 31 ++ 10 files changed, 1129 insertions(+), 33 deletions(-) Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6724 c046a42c-6fe2-441c-8c8c-71466251a162
2009-03-06 21:27:28 +01:00
vs->sasl.mechlist = mechname;
VNC_DEBUG("Validated mechname '%s'\n", mechname);
vnc_read_when(vs, protocol_client_auth_sasl_start_len, 4);
return 0;
fail:
vnc_client_error(vs);
g_free(mechname);
return -1;
Add SASL authentication support ("Daniel P. Berrange") This patch adds the new SASL authentication protocol to the VNC server. It is enabled by setting the 'sasl' flag when launching VNC. SASL can optionally provide encryption via its SSF layer, if a suitable mechanism is configured (eg, GSSAPI/Kerberos, or Digest-MD5). If an SSF layer is not available, then it should be combined with the x509 VNC authentication protocol which provides encryption. eg, if using GSSAPI qemu -vnc localhost:1,sasl eg if using TLS/x509 for encryption qemu -vnc localhost:1,sasl,tls,x509 By default the Cyrus SASL library will look for its configuration in the file /etc/sasl2/qemu.conf. For non-root users, this can be overridden by setting the SASL_CONF_PATH environment variable, eg to make it look in $HOME/.sasl2. NB unprivileged users may not have access to the full range of SASL mechanisms, since some of them require some administrative privileges to configure. The patch includes an example SASL configuration file which illustrates config for GSSAPI and Digest-MD5, though it should be noted that the latter is not really considered secure any more. Most of the SASL authentication code is located in a separate source file, vnc-auth-sasl.c. The main vnc.c file only contains minimal integration glue, specifically parsing of command line flags / setup, and calls to start the SASL auth process, to do encoding/decoding for data. There are several possible stacks for reading & writing of data, depending on the combo of VNC authentication methods in use - Clear. read/write straight to socket - TLS. read/write via GNUTLS helpers - SASL. encode/decode via SASL SSF layer, then read/write to socket - SASL+TLS. encode/decode via SASL SSF layer, then read/write via GNUTLS Hence, the vnc_client_read & vnc_client_write methods have been refactored a little. vnc_client_read: main entry point for reading, calls either - vnc_client_read_plain reading, with no intermediate decoding - vnc_client_read_sasl reading, with SASL SSF decoding These two methods, then call vnc_client_read_buf(). This decides whether to write to the socket directly or write via GNUTLS. The situation is the same for writing data. More extensive comments have been added in the code / patch. The vnc_client_read_sasl and vnc_client_write_sasl method implementations live in the separate vnc-auth-sasl.c file. The state required for the SASL auth mechanism is kept in a separate VncStateSASL struct, defined in vnc-auth-sasl.h and included in the main VncState. The configure script probes for SASL and automatically enables it if found, unless --disable-vnc-sasl was given to override it. Makefile | 7 Makefile.target | 5 b/qemu.sasl | 34 ++ b/vnc-auth-sasl.c | 626 ++++++++++++++++++++++++++++++++++++++++++++++++++++ b/vnc-auth-sasl.h | 67 +++++ configure | 34 ++ qemu-doc.texi | 97 ++++++++ vnc-auth-vencrypt.c | 12 vnc.c | 249 ++++++++++++++++++-- vnc.h | 31 ++ 10 files changed, 1129 insertions(+), 33 deletions(-) Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6724 c046a42c-6fe2-441c-8c8c-71466251a162
2009-03-06 21:27:28 +01:00
}
static int protocol_client_auth_sasl_mechname_len(VncState *vs, uint8_t *data, size_t len)
{
uint32_t mechlen = read_u32(data, 0);
VNC_DEBUG("Got client mechname len %d\n", mechlen);
if (mechlen > 100) {
VNC_DEBUG("Too long SASL mechname data %d\n", mechlen);
vnc_client_error(vs);
return -1;
Add SASL authentication support ("Daniel P. Berrange") This patch adds the new SASL authentication protocol to the VNC server. It is enabled by setting the 'sasl' flag when launching VNC. SASL can optionally provide encryption via its SSF layer, if a suitable mechanism is configured (eg, GSSAPI/Kerberos, or Digest-MD5). If an SSF layer is not available, then it should be combined with the x509 VNC authentication protocol which provides encryption. eg, if using GSSAPI qemu -vnc localhost:1,sasl eg if using TLS/x509 for encryption qemu -vnc localhost:1,sasl,tls,x509 By default the Cyrus SASL library will look for its configuration in the file /etc/sasl2/qemu.conf. For non-root users, this can be overridden by setting the SASL_CONF_PATH environment variable, eg to make it look in $HOME/.sasl2. NB unprivileged users may not have access to the full range of SASL mechanisms, since some of them require some administrative privileges to configure. The patch includes an example SASL configuration file which illustrates config for GSSAPI and Digest-MD5, though it should be noted that the latter is not really considered secure any more. Most of the SASL authentication code is located in a separate source file, vnc-auth-sasl.c. The main vnc.c file only contains minimal integration glue, specifically parsing of command line flags / setup, and calls to start the SASL auth process, to do encoding/decoding for data. There are several possible stacks for reading & writing of data, depending on the combo of VNC authentication methods in use - Clear. read/write straight to socket - TLS. read/write via GNUTLS helpers - SASL. encode/decode via SASL SSF layer, then read/write to socket - SASL+TLS. encode/decode via SASL SSF layer, then read/write via GNUTLS Hence, the vnc_client_read & vnc_client_write methods have been refactored a little. vnc_client_read: main entry point for reading, calls either - vnc_client_read_plain reading, with no intermediate decoding - vnc_client_read_sasl reading, with SASL SSF decoding These two methods, then call vnc_client_read_buf(). This decides whether to write to the socket directly or write via GNUTLS. The situation is the same for writing data. More extensive comments have been added in the code / patch. The vnc_client_read_sasl and vnc_client_write_sasl method implementations live in the separate vnc-auth-sasl.c file. The state required for the SASL auth mechanism is kept in a separate VncStateSASL struct, defined in vnc-auth-sasl.h and included in the main VncState. The configure script probes for SASL and automatically enables it if found, unless --disable-vnc-sasl was given to override it. Makefile | 7 Makefile.target | 5 b/qemu.sasl | 34 ++ b/vnc-auth-sasl.c | 626 ++++++++++++++++++++++++++++++++++++++++++++++++++++ b/vnc-auth-sasl.h | 67 +++++ configure | 34 ++ qemu-doc.texi | 97 ++++++++ vnc-auth-vencrypt.c | 12 vnc.c | 249 ++++++++++++++++++-- vnc.h | 31 ++ 10 files changed, 1129 insertions(+), 33 deletions(-) Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6724 c046a42c-6fe2-441c-8c8c-71466251a162
2009-03-06 21:27:28 +01:00
}
if (mechlen < 1) {
VNC_DEBUG("Too short SASL mechname %d\n", mechlen);
vnc_client_error(vs);
return -1;
Add SASL authentication support ("Daniel P. Berrange") This patch adds the new SASL authentication protocol to the VNC server. It is enabled by setting the 'sasl' flag when launching VNC. SASL can optionally provide encryption via its SSF layer, if a suitable mechanism is configured (eg, GSSAPI/Kerberos, or Digest-MD5). If an SSF layer is not available, then it should be combined with the x509 VNC authentication protocol which provides encryption. eg, if using GSSAPI qemu -vnc localhost:1,sasl eg if using TLS/x509 for encryption qemu -vnc localhost:1,sasl,tls,x509 By default the Cyrus SASL library will look for its configuration in the file /etc/sasl2/qemu.conf. For non-root users, this can be overridden by setting the SASL_CONF_PATH environment variable, eg to make it look in $HOME/.sasl2. NB unprivileged users may not have access to the full range of SASL mechanisms, since some of them require some administrative privileges to configure. The patch includes an example SASL configuration file which illustrates config for GSSAPI and Digest-MD5, though it should be noted that the latter is not really considered secure any more. Most of the SASL authentication code is located in a separate source file, vnc-auth-sasl.c. The main vnc.c file only contains minimal integration glue, specifically parsing of command line flags / setup, and calls to start the SASL auth process, to do encoding/decoding for data. There are several possible stacks for reading & writing of data, depending on the combo of VNC authentication methods in use - Clear. read/write straight to socket - TLS. read/write via GNUTLS helpers - SASL. encode/decode via SASL SSF layer, then read/write to socket - SASL+TLS. encode/decode via SASL SSF layer, then read/write via GNUTLS Hence, the vnc_client_read & vnc_client_write methods have been refactored a little. vnc_client_read: main entry point for reading, calls either - vnc_client_read_plain reading, with no intermediate decoding - vnc_client_read_sasl reading, with SASL SSF decoding These two methods, then call vnc_client_read_buf(). This decides whether to write to the socket directly or write via GNUTLS. The situation is the same for writing data. More extensive comments have been added in the code / patch. The vnc_client_read_sasl and vnc_client_write_sasl method implementations live in the separate vnc-auth-sasl.c file. The state required for the SASL auth mechanism is kept in a separate VncStateSASL struct, defined in vnc-auth-sasl.h and included in the main VncState. The configure script probes for SASL and automatically enables it if found, unless --disable-vnc-sasl was given to override it. Makefile | 7 Makefile.target | 5 b/qemu.sasl | 34 ++ b/vnc-auth-sasl.c | 626 ++++++++++++++++++++++++++++++++++++++++++++++++++++ b/vnc-auth-sasl.h | 67 +++++ configure | 34 ++ qemu-doc.texi | 97 ++++++++ vnc-auth-vencrypt.c | 12 vnc.c | 249 ++++++++++++++++++-- vnc.h | 31 ++ 10 files changed, 1129 insertions(+), 33 deletions(-) Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6724 c046a42c-6fe2-441c-8c8c-71466251a162
2009-03-06 21:27:28 +01:00
}
vnc_read_when(vs, protocol_client_auth_sasl_mechname,mechlen);
return 0;
}
void start_auth_sasl(VncState *vs)
{
const char *mechlist = NULL;
sasl_security_properties_t secprops;
int err;
char *localAddr, *remoteAddr;
int mechlistlen;
VNC_DEBUG("Initialize SASL auth %d\n", vs->csock);
/* Get local & remote client addresses in form IPADDR;PORT */
if (!(localAddr = vnc_socket_local_addr("%s;%s", vs->csock)))
goto authabort;
Add SASL authentication support ("Daniel P. Berrange") This patch adds the new SASL authentication protocol to the VNC server. It is enabled by setting the 'sasl' flag when launching VNC. SASL can optionally provide encryption via its SSF layer, if a suitable mechanism is configured (eg, GSSAPI/Kerberos, or Digest-MD5). If an SSF layer is not available, then it should be combined with the x509 VNC authentication protocol which provides encryption. eg, if using GSSAPI qemu -vnc localhost:1,sasl eg if using TLS/x509 for encryption qemu -vnc localhost:1,sasl,tls,x509 By default the Cyrus SASL library will look for its configuration in the file /etc/sasl2/qemu.conf. For non-root users, this can be overridden by setting the SASL_CONF_PATH environment variable, eg to make it look in $HOME/.sasl2. NB unprivileged users may not have access to the full range of SASL mechanisms, since some of them require some administrative privileges to configure. The patch includes an example SASL configuration file which illustrates config for GSSAPI and Digest-MD5, though it should be noted that the latter is not really considered secure any more. Most of the SASL authentication code is located in a separate source file, vnc-auth-sasl.c. The main vnc.c file only contains minimal integration glue, specifically parsing of command line flags / setup, and calls to start the SASL auth process, to do encoding/decoding for data. There are several possible stacks for reading & writing of data, depending on the combo of VNC authentication methods in use - Clear. read/write straight to socket - TLS. read/write via GNUTLS helpers - SASL. encode/decode via SASL SSF layer, then read/write to socket - SASL+TLS. encode/decode via SASL SSF layer, then read/write via GNUTLS Hence, the vnc_client_read & vnc_client_write methods have been refactored a little. vnc_client_read: main entry point for reading, calls either - vnc_client_read_plain reading, with no intermediate decoding - vnc_client_read_sasl reading, with SASL SSF decoding These two methods, then call vnc_client_read_buf(). This decides whether to write to the socket directly or write via GNUTLS. The situation is the same for writing data. More extensive comments have been added in the code / patch. The vnc_client_read_sasl and vnc_client_write_sasl method implementations live in the separate vnc-auth-sasl.c file. The state required for the SASL auth mechanism is kept in a separate VncStateSASL struct, defined in vnc-auth-sasl.h and included in the main VncState. The configure script probes for SASL and automatically enables it if found, unless --disable-vnc-sasl was given to override it. Makefile | 7 Makefile.target | 5 b/qemu.sasl | 34 ++ b/vnc-auth-sasl.c | 626 ++++++++++++++++++++++++++++++++++++++++++++++++++++ b/vnc-auth-sasl.h | 67 +++++ configure | 34 ++ qemu-doc.texi | 97 ++++++++ vnc-auth-vencrypt.c | 12 vnc.c | 249 ++++++++++++++++++-- vnc.h | 31 ++ 10 files changed, 1129 insertions(+), 33 deletions(-) Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6724 c046a42c-6fe2-441c-8c8c-71466251a162
2009-03-06 21:27:28 +01:00
if (!(remoteAddr = vnc_socket_remote_addr("%s;%s", vs->csock))) {
g_free(localAddr);
goto authabort;
Add SASL authentication support ("Daniel P. Berrange") This patch adds the new SASL authentication protocol to the VNC server. It is enabled by setting the 'sasl' flag when launching VNC. SASL can optionally provide encryption via its SSF layer, if a suitable mechanism is configured (eg, GSSAPI/Kerberos, or Digest-MD5). If an SSF layer is not available, then it should be combined with the x509 VNC authentication protocol which provides encryption. eg, if using GSSAPI qemu -vnc localhost:1,sasl eg if using TLS/x509 for encryption qemu -vnc localhost:1,sasl,tls,x509 By default the Cyrus SASL library will look for its configuration in the file /etc/sasl2/qemu.conf. For non-root users, this can be overridden by setting the SASL_CONF_PATH environment variable, eg to make it look in $HOME/.sasl2. NB unprivileged users may not have access to the full range of SASL mechanisms, since some of them require some administrative privileges to configure. The patch includes an example SASL configuration file which illustrates config for GSSAPI and Digest-MD5, though it should be noted that the latter is not really considered secure any more. Most of the SASL authentication code is located in a separate source file, vnc-auth-sasl.c. The main vnc.c file only contains minimal integration glue, specifically parsing of command line flags / setup, and calls to start the SASL auth process, to do encoding/decoding for data. There are several possible stacks for reading & writing of data, depending on the combo of VNC authentication methods in use - Clear. read/write straight to socket - TLS. read/write via GNUTLS helpers - SASL. encode/decode via SASL SSF layer, then read/write to socket - SASL+TLS. encode/decode via SASL SSF layer, then read/write via GNUTLS Hence, the vnc_client_read & vnc_client_write methods have been refactored a little. vnc_client_read: main entry point for reading, calls either - vnc_client_read_plain reading, with no intermediate decoding - vnc_client_read_sasl reading, with SASL SSF decoding These two methods, then call vnc_client_read_buf(). This decides whether to write to the socket directly or write via GNUTLS. The situation is the same for writing data. More extensive comments have been added in the code / patch. The vnc_client_read_sasl and vnc_client_write_sasl method implementations live in the separate vnc-auth-sasl.c file. The state required for the SASL auth mechanism is kept in a separate VncStateSASL struct, defined in vnc-auth-sasl.h and included in the main VncState. The configure script probes for SASL and automatically enables it if found, unless --disable-vnc-sasl was given to override it. Makefile | 7 Makefile.target | 5 b/qemu.sasl | 34 ++ b/vnc-auth-sasl.c | 626 ++++++++++++++++++++++++++++++++++++++++++++++++++++ b/vnc-auth-sasl.h | 67 +++++ configure | 34 ++ qemu-doc.texi | 97 ++++++++ vnc-auth-vencrypt.c | 12 vnc.c | 249 ++++++++++++++++++-- vnc.h | 31 ++ 10 files changed, 1129 insertions(+), 33 deletions(-) Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6724 c046a42c-6fe2-441c-8c8c-71466251a162
2009-03-06 21:27:28 +01:00
}
err = sasl_server_new("vnc",
NULL, /* FQDN - just delegates to gethostname */
NULL, /* User realm */
localAddr,
remoteAddr,
NULL, /* Callbacks, not needed */
SASL_SUCCESS_DATA,
&vs->sasl.conn);
g_free(localAddr);
g_free(remoteAddr);
Add SASL authentication support ("Daniel P. Berrange") This patch adds the new SASL authentication protocol to the VNC server. It is enabled by setting the 'sasl' flag when launching VNC. SASL can optionally provide encryption via its SSF layer, if a suitable mechanism is configured (eg, GSSAPI/Kerberos, or Digest-MD5). If an SSF layer is not available, then it should be combined with the x509 VNC authentication protocol which provides encryption. eg, if using GSSAPI qemu -vnc localhost:1,sasl eg if using TLS/x509 for encryption qemu -vnc localhost:1,sasl,tls,x509 By default the Cyrus SASL library will look for its configuration in the file /etc/sasl2/qemu.conf. For non-root users, this can be overridden by setting the SASL_CONF_PATH environment variable, eg to make it look in $HOME/.sasl2. NB unprivileged users may not have access to the full range of SASL mechanisms, since some of them require some administrative privileges to configure. The patch includes an example SASL configuration file which illustrates config for GSSAPI and Digest-MD5, though it should be noted that the latter is not really considered secure any more. Most of the SASL authentication code is located in a separate source file, vnc-auth-sasl.c. The main vnc.c file only contains minimal integration glue, specifically parsing of command line flags / setup, and calls to start the SASL auth process, to do encoding/decoding for data. There are several possible stacks for reading & writing of data, depending on the combo of VNC authentication methods in use - Clear. read/write straight to socket - TLS. read/write via GNUTLS helpers - SASL. encode/decode via SASL SSF layer, then read/write to socket - SASL+TLS. encode/decode via SASL SSF layer, then read/write via GNUTLS Hence, the vnc_client_read & vnc_client_write methods have been refactored a little. vnc_client_read: main entry point for reading, calls either - vnc_client_read_plain reading, with no intermediate decoding - vnc_client_read_sasl reading, with SASL SSF decoding These two methods, then call vnc_client_read_buf(). This decides whether to write to the socket directly or write via GNUTLS. The situation is the same for writing data. More extensive comments have been added in the code / patch. The vnc_client_read_sasl and vnc_client_write_sasl method implementations live in the separate vnc-auth-sasl.c file. The state required for the SASL auth mechanism is kept in a separate VncStateSASL struct, defined in vnc-auth-sasl.h and included in the main VncState. The configure script probes for SASL and automatically enables it if found, unless --disable-vnc-sasl was given to override it. Makefile | 7 Makefile.target | 5 b/qemu.sasl | 34 ++ b/vnc-auth-sasl.c | 626 ++++++++++++++++++++++++++++++++++++++++++++++++++++ b/vnc-auth-sasl.h | 67 +++++ configure | 34 ++ qemu-doc.texi | 97 ++++++++ vnc-auth-vencrypt.c | 12 vnc.c | 249 ++++++++++++++++++-- vnc.h | 31 ++ 10 files changed, 1129 insertions(+), 33 deletions(-) Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6724 c046a42c-6fe2-441c-8c8c-71466251a162
2009-03-06 21:27:28 +01:00
localAddr = remoteAddr = NULL;
if (err != SASL_OK) {
VNC_DEBUG("sasl context setup failed %d (%s)",
err, sasl_errstring(err, NULL, NULL));
vs->sasl.conn = NULL;
goto authabort;
Add SASL authentication support ("Daniel P. Berrange") This patch adds the new SASL authentication protocol to the VNC server. It is enabled by setting the 'sasl' flag when launching VNC. SASL can optionally provide encryption via its SSF layer, if a suitable mechanism is configured (eg, GSSAPI/Kerberos, or Digest-MD5). If an SSF layer is not available, then it should be combined with the x509 VNC authentication protocol which provides encryption. eg, if using GSSAPI qemu -vnc localhost:1,sasl eg if using TLS/x509 for encryption qemu -vnc localhost:1,sasl,tls,x509 By default the Cyrus SASL library will look for its configuration in the file /etc/sasl2/qemu.conf. For non-root users, this can be overridden by setting the SASL_CONF_PATH environment variable, eg to make it look in $HOME/.sasl2. NB unprivileged users may not have access to the full range of SASL mechanisms, since some of them require some administrative privileges to configure. The patch includes an example SASL configuration file which illustrates config for GSSAPI and Digest-MD5, though it should be noted that the latter is not really considered secure any more. Most of the SASL authentication code is located in a separate source file, vnc-auth-sasl.c. The main vnc.c file only contains minimal integration glue, specifically parsing of command line flags / setup, and calls to start the SASL auth process, to do encoding/decoding for data. There are several possible stacks for reading & writing of data, depending on the combo of VNC authentication methods in use - Clear. read/write straight to socket - TLS. read/write via GNUTLS helpers - SASL. encode/decode via SASL SSF layer, then read/write to socket - SASL+TLS. encode/decode via SASL SSF layer, then read/write via GNUTLS Hence, the vnc_client_read & vnc_client_write methods have been refactored a little. vnc_client_read: main entry point for reading, calls either - vnc_client_read_plain reading, with no intermediate decoding - vnc_client_read_sasl reading, with SASL SSF decoding These two methods, then call vnc_client_read_buf(). This decides whether to write to the socket directly or write via GNUTLS. The situation is the same for writing data. More extensive comments have been added in the code / patch. The vnc_client_read_sasl and vnc_client_write_sasl method implementations live in the separate vnc-auth-sasl.c file. The state required for the SASL auth mechanism is kept in a separate VncStateSASL struct, defined in vnc-auth-sasl.h and included in the main VncState. The configure script probes for SASL and automatically enables it if found, unless --disable-vnc-sasl was given to override it. Makefile | 7 Makefile.target | 5 b/qemu.sasl | 34 ++ b/vnc-auth-sasl.c | 626 ++++++++++++++++++++++++++++++++++++++++++++++++++++ b/vnc-auth-sasl.h | 67 +++++ configure | 34 ++ qemu-doc.texi | 97 ++++++++ vnc-auth-vencrypt.c | 12 vnc.c | 249 ++++++++++++++++++-- vnc.h | 31 ++ 10 files changed, 1129 insertions(+), 33 deletions(-) Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6724 c046a42c-6fe2-441c-8c8c-71466251a162
2009-03-06 21:27:28 +01:00
}
#ifdef CONFIG_VNC_TLS
/* Inform SASL that we've got an external SSF layer from TLS/x509 */
if (vs->auth == VNC_AUTH_VENCRYPT &&
vs->subauth == VNC_AUTH_VENCRYPT_X509SASL) {
gnutls_cipher_algorithm_t cipher;
sasl_ssf_t ssf;
cipher = gnutls_cipher_get(vs->tls.session);
if (!(ssf = (sasl_ssf_t)gnutls_cipher_get_key_size(cipher))) {
VNC_DEBUG("%s", "cannot TLS get cipher size\n");
sasl_dispose(&vs->sasl.conn);
vs->sasl.conn = NULL;
goto authabort;
}
ssf *= 8; /* tls key size is bytes, sasl wants bits */
err = sasl_setprop(vs->sasl.conn, SASL_SSF_EXTERNAL, &ssf);
if (err != SASL_OK) {
VNC_DEBUG("cannot set SASL external SSF %d (%s)\n",
err, sasl_errstring(err, NULL, NULL));
sasl_dispose(&vs->sasl.conn);
vs->sasl.conn = NULL;
goto authabort;
}
Add SASL authentication support ("Daniel P. Berrange") This patch adds the new SASL authentication protocol to the VNC server. It is enabled by setting the 'sasl' flag when launching VNC. SASL can optionally provide encryption via its SSF layer, if a suitable mechanism is configured (eg, GSSAPI/Kerberos, or Digest-MD5). If an SSF layer is not available, then it should be combined with the x509 VNC authentication protocol which provides encryption. eg, if using GSSAPI qemu -vnc localhost:1,sasl eg if using TLS/x509 for encryption qemu -vnc localhost:1,sasl,tls,x509 By default the Cyrus SASL library will look for its configuration in the file /etc/sasl2/qemu.conf. For non-root users, this can be overridden by setting the SASL_CONF_PATH environment variable, eg to make it look in $HOME/.sasl2. NB unprivileged users may not have access to the full range of SASL mechanisms, since some of them require some administrative privileges to configure. The patch includes an example SASL configuration file which illustrates config for GSSAPI and Digest-MD5, though it should be noted that the latter is not really considered secure any more. Most of the SASL authentication code is located in a separate source file, vnc-auth-sasl.c. The main vnc.c file only contains minimal integration glue, specifically parsing of command line flags / setup, and calls to start the SASL auth process, to do encoding/decoding for data. There are several possible stacks for reading & writing of data, depending on the combo of VNC authentication methods in use - Clear. read/write straight to socket - TLS. read/write via GNUTLS helpers - SASL. encode/decode via SASL SSF layer, then read/write to socket - SASL+TLS. encode/decode via SASL SSF layer, then read/write via GNUTLS Hence, the vnc_client_read & vnc_client_write methods have been refactored a little. vnc_client_read: main entry point for reading, calls either - vnc_client_read_plain reading, with no intermediate decoding - vnc_client_read_sasl reading, with SASL SSF decoding These two methods, then call vnc_client_read_buf(). This decides whether to write to the socket directly or write via GNUTLS. The situation is the same for writing data. More extensive comments have been added in the code / patch. The vnc_client_read_sasl and vnc_client_write_sasl method implementations live in the separate vnc-auth-sasl.c file. The state required for the SASL auth mechanism is kept in a separate VncStateSASL struct, defined in vnc-auth-sasl.h and included in the main VncState. The configure script probes for SASL and automatically enables it if found, unless --disable-vnc-sasl was given to override it. Makefile | 7 Makefile.target | 5 b/qemu.sasl | 34 ++ b/vnc-auth-sasl.c | 626 ++++++++++++++++++++++++++++++++++++++++++++++++++++ b/vnc-auth-sasl.h | 67 +++++ configure | 34 ++ qemu-doc.texi | 97 ++++++++ vnc-auth-vencrypt.c | 12 vnc.c | 249 ++++++++++++++++++-- vnc.h | 31 ++ 10 files changed, 1129 insertions(+), 33 deletions(-) Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6724 c046a42c-6fe2-441c-8c8c-71466251a162
2009-03-06 21:27:28 +01:00
} else
#endif /* CONFIG_VNC_TLS */
vs->sasl.wantSSF = 1;
Add SASL authentication support ("Daniel P. Berrange") This patch adds the new SASL authentication protocol to the VNC server. It is enabled by setting the 'sasl' flag when launching VNC. SASL can optionally provide encryption via its SSF layer, if a suitable mechanism is configured (eg, GSSAPI/Kerberos, or Digest-MD5). If an SSF layer is not available, then it should be combined with the x509 VNC authentication protocol which provides encryption. eg, if using GSSAPI qemu -vnc localhost:1,sasl eg if using TLS/x509 for encryption qemu -vnc localhost:1,sasl,tls,x509 By default the Cyrus SASL library will look for its configuration in the file /etc/sasl2/qemu.conf. For non-root users, this can be overridden by setting the SASL_CONF_PATH environment variable, eg to make it look in $HOME/.sasl2. NB unprivileged users may not have access to the full range of SASL mechanisms, since some of them require some administrative privileges to configure. The patch includes an example SASL configuration file which illustrates config for GSSAPI and Digest-MD5, though it should be noted that the latter is not really considered secure any more. Most of the SASL authentication code is located in a separate source file, vnc-auth-sasl.c. The main vnc.c file only contains minimal integration glue, specifically parsing of command line flags / setup, and calls to start the SASL auth process, to do encoding/decoding for data. There are several possible stacks for reading & writing of data, depending on the combo of VNC authentication methods in use - Clear. read/write straight to socket - TLS. read/write via GNUTLS helpers - SASL. encode/decode via SASL SSF layer, then read/write to socket - SASL+TLS. encode/decode via SASL SSF layer, then read/write via GNUTLS Hence, the vnc_client_read & vnc_client_write methods have been refactored a little. vnc_client_read: main entry point for reading, calls either - vnc_client_read_plain reading, with no intermediate decoding - vnc_client_read_sasl reading, with SASL SSF decoding These two methods, then call vnc_client_read_buf(). This decides whether to write to the socket directly or write via GNUTLS. The situation is the same for writing data. More extensive comments have been added in the code / patch. The vnc_client_read_sasl and vnc_client_write_sasl method implementations live in the separate vnc-auth-sasl.c file. The state required for the SASL auth mechanism is kept in a separate VncStateSASL struct, defined in vnc-auth-sasl.h and included in the main VncState. The configure script probes for SASL and automatically enables it if found, unless --disable-vnc-sasl was given to override it. Makefile | 7 Makefile.target | 5 b/qemu.sasl | 34 ++ b/vnc-auth-sasl.c | 626 ++++++++++++++++++++++++++++++++++++++++++++++++++++ b/vnc-auth-sasl.h | 67 +++++ configure | 34 ++ qemu-doc.texi | 97 ++++++++ vnc-auth-vencrypt.c | 12 vnc.c | 249 ++++++++++++++++++-- vnc.h | 31 ++ 10 files changed, 1129 insertions(+), 33 deletions(-) Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6724 c046a42c-6fe2-441c-8c8c-71466251a162
2009-03-06 21:27:28 +01:00
memset (&secprops, 0, sizeof secprops);
/* Inform SASL that we've got an external SSF layer from TLS */
if (strncmp(vs->vd->display, "unix:", 5) == 0
#ifdef CONFIG_VNC_TLS
/* Disable SSF, if using TLS+x509+SASL only. TLS without x509
is not sufficiently strong */
|| (vs->auth == VNC_AUTH_VENCRYPT &&
vs->subauth == VNC_AUTH_VENCRYPT_X509SASL)
Add SASL authentication support ("Daniel P. Berrange") This patch adds the new SASL authentication protocol to the VNC server. It is enabled by setting the 'sasl' flag when launching VNC. SASL can optionally provide encryption via its SSF layer, if a suitable mechanism is configured (eg, GSSAPI/Kerberos, or Digest-MD5). If an SSF layer is not available, then it should be combined with the x509 VNC authentication protocol which provides encryption. eg, if using GSSAPI qemu -vnc localhost:1,sasl eg if using TLS/x509 for encryption qemu -vnc localhost:1,sasl,tls,x509 By default the Cyrus SASL library will look for its configuration in the file /etc/sasl2/qemu.conf. For non-root users, this can be overridden by setting the SASL_CONF_PATH environment variable, eg to make it look in $HOME/.sasl2. NB unprivileged users may not have access to the full range of SASL mechanisms, since some of them require some administrative privileges to configure. The patch includes an example SASL configuration file which illustrates config for GSSAPI and Digest-MD5, though it should be noted that the latter is not really considered secure any more. Most of the SASL authentication code is located in a separate source file, vnc-auth-sasl.c. The main vnc.c file only contains minimal integration glue, specifically parsing of command line flags / setup, and calls to start the SASL auth process, to do encoding/decoding for data. There are several possible stacks for reading & writing of data, depending on the combo of VNC authentication methods in use - Clear. read/write straight to socket - TLS. read/write via GNUTLS helpers - SASL. encode/decode via SASL SSF layer, then read/write to socket - SASL+TLS. encode/decode via SASL SSF layer, then read/write via GNUTLS Hence, the vnc_client_read & vnc_client_write methods have been refactored a little. vnc_client_read: main entry point for reading, calls either - vnc_client_read_plain reading, with no intermediate decoding - vnc_client_read_sasl reading, with SASL SSF decoding These two methods, then call vnc_client_read_buf(). This decides whether to write to the socket directly or write via GNUTLS. The situation is the same for writing data. More extensive comments have been added in the code / patch. The vnc_client_read_sasl and vnc_client_write_sasl method implementations live in the separate vnc-auth-sasl.c file. The state required for the SASL auth mechanism is kept in a separate VncStateSASL struct, defined in vnc-auth-sasl.h and included in the main VncState. The configure script probes for SASL and automatically enables it if found, unless --disable-vnc-sasl was given to override it. Makefile | 7 Makefile.target | 5 b/qemu.sasl | 34 ++ b/vnc-auth-sasl.c | 626 ++++++++++++++++++++++++++++++++++++++++++++++++++++ b/vnc-auth-sasl.h | 67 +++++ configure | 34 ++ qemu-doc.texi | 97 ++++++++ vnc-auth-vencrypt.c | 12 vnc.c | 249 ++++++++++++++++++-- vnc.h | 31 ++ 10 files changed, 1129 insertions(+), 33 deletions(-) Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6724 c046a42c-6fe2-441c-8c8c-71466251a162
2009-03-06 21:27:28 +01:00
#endif /* CONFIG_VNC_TLS */
) {
/* If we've got TLS or UNIX domain sock, we don't care about SSF */
secprops.min_ssf = 0;
secprops.max_ssf = 0;
secprops.maxbufsize = 8192;
secprops.security_flags = 0;
Add SASL authentication support ("Daniel P. Berrange") This patch adds the new SASL authentication protocol to the VNC server. It is enabled by setting the 'sasl' flag when launching VNC. SASL can optionally provide encryption via its SSF layer, if a suitable mechanism is configured (eg, GSSAPI/Kerberos, or Digest-MD5). If an SSF layer is not available, then it should be combined with the x509 VNC authentication protocol which provides encryption. eg, if using GSSAPI qemu -vnc localhost:1,sasl eg if using TLS/x509 for encryption qemu -vnc localhost:1,sasl,tls,x509 By default the Cyrus SASL library will look for its configuration in the file /etc/sasl2/qemu.conf. For non-root users, this can be overridden by setting the SASL_CONF_PATH environment variable, eg to make it look in $HOME/.sasl2. NB unprivileged users may not have access to the full range of SASL mechanisms, since some of them require some administrative privileges to configure. The patch includes an example SASL configuration file which illustrates config for GSSAPI and Digest-MD5, though it should be noted that the latter is not really considered secure any more. Most of the SASL authentication code is located in a separate source file, vnc-auth-sasl.c. The main vnc.c file only contains minimal integration glue, specifically parsing of command line flags / setup, and calls to start the SASL auth process, to do encoding/decoding for data. There are several possible stacks for reading & writing of data, depending on the combo of VNC authentication methods in use - Clear. read/write straight to socket - TLS. read/write via GNUTLS helpers - SASL. encode/decode via SASL SSF layer, then read/write to socket - SASL+TLS. encode/decode via SASL SSF layer, then read/write via GNUTLS Hence, the vnc_client_read & vnc_client_write methods have been refactored a little. vnc_client_read: main entry point for reading, calls either - vnc_client_read_plain reading, with no intermediate decoding - vnc_client_read_sasl reading, with SASL SSF decoding These two methods, then call vnc_client_read_buf(). This decides whether to write to the socket directly or write via GNUTLS. The situation is the same for writing data. More extensive comments have been added in the code / patch. The vnc_client_read_sasl and vnc_client_write_sasl method implementations live in the separate vnc-auth-sasl.c file. The state required for the SASL auth mechanism is kept in a separate VncStateSASL struct, defined in vnc-auth-sasl.h and included in the main VncState. The configure script probes for SASL and automatically enables it if found, unless --disable-vnc-sasl was given to override it. Makefile | 7 Makefile.target | 5 b/qemu.sasl | 34 ++ b/vnc-auth-sasl.c | 626 ++++++++++++++++++++++++++++++++++++++++++++++++++++ b/vnc-auth-sasl.h | 67 +++++ configure | 34 ++ qemu-doc.texi | 97 ++++++++ vnc-auth-vencrypt.c | 12 vnc.c | 249 ++++++++++++++++++-- vnc.h | 31 ++ 10 files changed, 1129 insertions(+), 33 deletions(-) Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6724 c046a42c-6fe2-441c-8c8c-71466251a162
2009-03-06 21:27:28 +01:00
} else {
/* Plain TCP, better get an SSF layer */
secprops.min_ssf = 56; /* Good enough to require kerberos */
secprops.max_ssf = 100000; /* Arbitrary big number */
secprops.maxbufsize = 8192;
/* Forbid any anonymous or trivially crackable auth */
secprops.security_flags =
SASL_SEC_NOANONYMOUS | SASL_SEC_NOPLAINTEXT;
Add SASL authentication support ("Daniel P. Berrange") This patch adds the new SASL authentication protocol to the VNC server. It is enabled by setting the 'sasl' flag when launching VNC. SASL can optionally provide encryption via its SSF layer, if a suitable mechanism is configured (eg, GSSAPI/Kerberos, or Digest-MD5). If an SSF layer is not available, then it should be combined with the x509 VNC authentication protocol which provides encryption. eg, if using GSSAPI qemu -vnc localhost:1,sasl eg if using TLS/x509 for encryption qemu -vnc localhost:1,sasl,tls,x509 By default the Cyrus SASL library will look for its configuration in the file /etc/sasl2/qemu.conf. For non-root users, this can be overridden by setting the SASL_CONF_PATH environment variable, eg to make it look in $HOME/.sasl2. NB unprivileged users may not have access to the full range of SASL mechanisms, since some of them require some administrative privileges to configure. The patch includes an example SASL configuration file which illustrates config for GSSAPI and Digest-MD5, though it should be noted that the latter is not really considered secure any more. Most of the SASL authentication code is located in a separate source file, vnc-auth-sasl.c. The main vnc.c file only contains minimal integration glue, specifically parsing of command line flags / setup, and calls to start the SASL auth process, to do encoding/decoding for data. There are several possible stacks for reading & writing of data, depending on the combo of VNC authentication methods in use - Clear. read/write straight to socket - TLS. read/write via GNUTLS helpers - SASL. encode/decode via SASL SSF layer, then read/write to socket - SASL+TLS. encode/decode via SASL SSF layer, then read/write via GNUTLS Hence, the vnc_client_read & vnc_client_write methods have been refactored a little. vnc_client_read: main entry point for reading, calls either - vnc_client_read_plain reading, with no intermediate decoding - vnc_client_read_sasl reading, with SASL SSF decoding These two methods, then call vnc_client_read_buf(). This decides whether to write to the socket directly or write via GNUTLS. The situation is the same for writing data. More extensive comments have been added in the code / patch. The vnc_client_read_sasl and vnc_client_write_sasl method implementations live in the separate vnc-auth-sasl.c file. The state required for the SASL auth mechanism is kept in a separate VncStateSASL struct, defined in vnc-auth-sasl.h and included in the main VncState. The configure script probes for SASL and automatically enables it if found, unless --disable-vnc-sasl was given to override it. Makefile | 7 Makefile.target | 5 b/qemu.sasl | 34 ++ b/vnc-auth-sasl.c | 626 ++++++++++++++++++++++++++++++++++++++++++++++++++++ b/vnc-auth-sasl.h | 67 +++++ configure | 34 ++ qemu-doc.texi | 97 ++++++++ vnc-auth-vencrypt.c | 12 vnc.c | 249 ++++++++++++++++++-- vnc.h | 31 ++ 10 files changed, 1129 insertions(+), 33 deletions(-) Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6724 c046a42c-6fe2-441c-8c8c-71466251a162
2009-03-06 21:27:28 +01:00
}
err = sasl_setprop(vs->sasl.conn, SASL_SEC_PROPS, &secprops);
if (err != SASL_OK) {
VNC_DEBUG("cannot set SASL security props %d (%s)\n",
err, sasl_errstring(err, NULL, NULL));
sasl_dispose(&vs->sasl.conn);
vs->sasl.conn = NULL;
goto authabort;
Add SASL authentication support ("Daniel P. Berrange") This patch adds the new SASL authentication protocol to the VNC server. It is enabled by setting the 'sasl' flag when launching VNC. SASL can optionally provide encryption via its SSF layer, if a suitable mechanism is configured (eg, GSSAPI/Kerberos, or Digest-MD5). If an SSF layer is not available, then it should be combined with the x509 VNC authentication protocol which provides encryption. eg, if using GSSAPI qemu -vnc localhost:1,sasl eg if using TLS/x509 for encryption qemu -vnc localhost:1,sasl,tls,x509 By default the Cyrus SASL library will look for its configuration in the file /etc/sasl2/qemu.conf. For non-root users, this can be overridden by setting the SASL_CONF_PATH environment variable, eg to make it look in $HOME/.sasl2. NB unprivileged users may not have access to the full range of SASL mechanisms, since some of them require some administrative privileges to configure. The patch includes an example SASL configuration file which illustrates config for GSSAPI and Digest-MD5, though it should be noted that the latter is not really considered secure any more. Most of the SASL authentication code is located in a separate source file, vnc-auth-sasl.c. The main vnc.c file only contains minimal integration glue, specifically parsing of command line flags / setup, and calls to start the SASL auth process, to do encoding/decoding for data. There are several possible stacks for reading & writing of data, depending on the combo of VNC authentication methods in use - Clear. read/write straight to socket - TLS. read/write via GNUTLS helpers - SASL. encode/decode via SASL SSF layer, then read/write to socket - SASL+TLS. encode/decode via SASL SSF layer, then read/write via GNUTLS Hence, the vnc_client_read & vnc_client_write methods have been refactored a little. vnc_client_read: main entry point for reading, calls either - vnc_client_read_plain reading, with no intermediate decoding - vnc_client_read_sasl reading, with SASL SSF decoding These two methods, then call vnc_client_read_buf(). This decides whether to write to the socket directly or write via GNUTLS. The situation is the same for writing data. More extensive comments have been added in the code / patch. The vnc_client_read_sasl and vnc_client_write_sasl method implementations live in the separate vnc-auth-sasl.c file. The state required for the SASL auth mechanism is kept in a separate VncStateSASL struct, defined in vnc-auth-sasl.h and included in the main VncState. The configure script probes for SASL and automatically enables it if found, unless --disable-vnc-sasl was given to override it. Makefile | 7 Makefile.target | 5 b/qemu.sasl | 34 ++ b/vnc-auth-sasl.c | 626 ++++++++++++++++++++++++++++++++++++++++++++++++++++ b/vnc-auth-sasl.h | 67 +++++ configure | 34 ++ qemu-doc.texi | 97 ++++++++ vnc-auth-vencrypt.c | 12 vnc.c | 249 ++++++++++++++++++-- vnc.h | 31 ++ 10 files changed, 1129 insertions(+), 33 deletions(-) Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6724 c046a42c-6fe2-441c-8c8c-71466251a162
2009-03-06 21:27:28 +01:00
}
err = sasl_listmech(vs->sasl.conn,
NULL, /* Don't need to set user */
"", /* Prefix */
",", /* Separator */
"", /* Suffix */
&mechlist,
NULL,
NULL);
Add SASL authentication support ("Daniel P. Berrange") This patch adds the new SASL authentication protocol to the VNC server. It is enabled by setting the 'sasl' flag when launching VNC. SASL can optionally provide encryption via its SSF layer, if a suitable mechanism is configured (eg, GSSAPI/Kerberos, or Digest-MD5). If an SSF layer is not available, then it should be combined with the x509 VNC authentication protocol which provides encryption. eg, if using GSSAPI qemu -vnc localhost:1,sasl eg if using TLS/x509 for encryption qemu -vnc localhost:1,sasl,tls,x509 By default the Cyrus SASL library will look for its configuration in the file /etc/sasl2/qemu.conf. For non-root users, this can be overridden by setting the SASL_CONF_PATH environment variable, eg to make it look in $HOME/.sasl2. NB unprivileged users may not have access to the full range of SASL mechanisms, since some of them require some administrative privileges to configure. The patch includes an example SASL configuration file which illustrates config for GSSAPI and Digest-MD5, though it should be noted that the latter is not really considered secure any more. Most of the SASL authentication code is located in a separate source file, vnc-auth-sasl.c. The main vnc.c file only contains minimal integration glue, specifically parsing of command line flags / setup, and calls to start the SASL auth process, to do encoding/decoding for data. There are several possible stacks for reading & writing of data, depending on the combo of VNC authentication methods in use - Clear. read/write straight to socket - TLS. read/write via GNUTLS helpers - SASL. encode/decode via SASL SSF layer, then read/write to socket - SASL+TLS. encode/decode via SASL SSF layer, then read/write via GNUTLS Hence, the vnc_client_read & vnc_client_write methods have been refactored a little. vnc_client_read: main entry point for reading, calls either - vnc_client_read_plain reading, with no intermediate decoding - vnc_client_read_sasl reading, with SASL SSF decoding These two methods, then call vnc_client_read_buf(). This decides whether to write to the socket directly or write via GNUTLS. The situation is the same for writing data. More extensive comments have been added in the code / patch. The vnc_client_read_sasl and vnc_client_write_sasl method implementations live in the separate vnc-auth-sasl.c file. The state required for the SASL auth mechanism is kept in a separate VncStateSASL struct, defined in vnc-auth-sasl.h and included in the main VncState. The configure script probes for SASL and automatically enables it if found, unless --disable-vnc-sasl was given to override it. Makefile | 7 Makefile.target | 5 b/qemu.sasl | 34 ++ b/vnc-auth-sasl.c | 626 ++++++++++++++++++++++++++++++++++++++++++++++++++++ b/vnc-auth-sasl.h | 67 +++++ configure | 34 ++ qemu-doc.texi | 97 ++++++++ vnc-auth-vencrypt.c | 12 vnc.c | 249 ++++++++++++++++++-- vnc.h | 31 ++ 10 files changed, 1129 insertions(+), 33 deletions(-) Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6724 c046a42c-6fe2-441c-8c8c-71466251a162
2009-03-06 21:27:28 +01:00
if (err != SASL_OK) {
VNC_DEBUG("cannot list SASL mechanisms %d (%s)\n",
err, sasl_errdetail(vs->sasl.conn));
sasl_dispose(&vs->sasl.conn);
vs->sasl.conn = NULL;
goto authabort;
Add SASL authentication support ("Daniel P. Berrange") This patch adds the new SASL authentication protocol to the VNC server. It is enabled by setting the 'sasl' flag when launching VNC. SASL can optionally provide encryption via its SSF layer, if a suitable mechanism is configured (eg, GSSAPI/Kerberos, or Digest-MD5). If an SSF layer is not available, then it should be combined with the x509 VNC authentication protocol which provides encryption. eg, if using GSSAPI qemu -vnc localhost:1,sasl eg if using TLS/x509 for encryption qemu -vnc localhost:1,sasl,tls,x509 By default the Cyrus SASL library will look for its configuration in the file /etc/sasl2/qemu.conf. For non-root users, this can be overridden by setting the SASL_CONF_PATH environment variable, eg to make it look in $HOME/.sasl2. NB unprivileged users may not have access to the full range of SASL mechanisms, since some of them require some administrative privileges to configure. The patch includes an example SASL configuration file which illustrates config for GSSAPI and Digest-MD5, though it should be noted that the latter is not really considered secure any more. Most of the SASL authentication code is located in a separate source file, vnc-auth-sasl.c. The main vnc.c file only contains minimal integration glue, specifically parsing of command line flags / setup, and calls to start the SASL auth process, to do encoding/decoding for data. There are several possible stacks for reading & writing of data, depending on the combo of VNC authentication methods in use - Clear. read/write straight to socket - TLS. read/write via GNUTLS helpers - SASL. encode/decode via SASL SSF layer, then read/write to socket - SASL+TLS. encode/decode via SASL SSF layer, then read/write via GNUTLS Hence, the vnc_client_read & vnc_client_write methods have been refactored a little. vnc_client_read: main entry point for reading, calls either - vnc_client_read_plain reading, with no intermediate decoding - vnc_client_read_sasl reading, with SASL SSF decoding These two methods, then call vnc_client_read_buf(). This decides whether to write to the socket directly or write via GNUTLS. The situation is the same for writing data. More extensive comments have been added in the code / patch. The vnc_client_read_sasl and vnc_client_write_sasl method implementations live in the separate vnc-auth-sasl.c file. The state required for the SASL auth mechanism is kept in a separate VncStateSASL struct, defined in vnc-auth-sasl.h and included in the main VncState. The configure script probes for SASL and automatically enables it if found, unless --disable-vnc-sasl was given to override it. Makefile | 7 Makefile.target | 5 b/qemu.sasl | 34 ++ b/vnc-auth-sasl.c | 626 ++++++++++++++++++++++++++++++++++++++++++++++++++++ b/vnc-auth-sasl.h | 67 +++++ configure | 34 ++ qemu-doc.texi | 97 ++++++++ vnc-auth-vencrypt.c | 12 vnc.c | 249 ++++++++++++++++++-- vnc.h | 31 ++ 10 files changed, 1129 insertions(+), 33 deletions(-) Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6724 c046a42c-6fe2-441c-8c8c-71466251a162
2009-03-06 21:27:28 +01:00
}
VNC_DEBUG("Available mechanisms for client: '%s'\n", mechlist);
vs->sasl.mechlist = g_strdup(mechlist);
Add SASL authentication support ("Daniel P. Berrange") This patch adds the new SASL authentication protocol to the VNC server. It is enabled by setting the 'sasl' flag when launching VNC. SASL can optionally provide encryption via its SSF layer, if a suitable mechanism is configured (eg, GSSAPI/Kerberos, or Digest-MD5). If an SSF layer is not available, then it should be combined with the x509 VNC authentication protocol which provides encryption. eg, if using GSSAPI qemu -vnc localhost:1,sasl eg if using TLS/x509 for encryption qemu -vnc localhost:1,sasl,tls,x509 By default the Cyrus SASL library will look for its configuration in the file /etc/sasl2/qemu.conf. For non-root users, this can be overridden by setting the SASL_CONF_PATH environment variable, eg to make it look in $HOME/.sasl2. NB unprivileged users may not have access to the full range of SASL mechanisms, since some of them require some administrative privileges to configure. The patch includes an example SASL configuration file which illustrates config for GSSAPI and Digest-MD5, though it should be noted that the latter is not really considered secure any more. Most of the SASL authentication code is located in a separate source file, vnc-auth-sasl.c. The main vnc.c file only contains minimal integration glue, specifically parsing of command line flags / setup, and calls to start the SASL auth process, to do encoding/decoding for data. There are several possible stacks for reading & writing of data, depending on the combo of VNC authentication methods in use - Clear. read/write straight to socket - TLS. read/write via GNUTLS helpers - SASL. encode/decode via SASL SSF layer, then read/write to socket - SASL+TLS. encode/decode via SASL SSF layer, then read/write via GNUTLS Hence, the vnc_client_read & vnc_client_write methods have been refactored a little. vnc_client_read: main entry point for reading, calls either - vnc_client_read_plain reading, with no intermediate decoding - vnc_client_read_sasl reading, with SASL SSF decoding These two methods, then call vnc_client_read_buf(). This decides whether to write to the socket directly or write via GNUTLS. The situation is the same for writing data. More extensive comments have been added in the code / patch. The vnc_client_read_sasl and vnc_client_write_sasl method implementations live in the separate vnc-auth-sasl.c file. The state required for the SASL auth mechanism is kept in a separate VncStateSASL struct, defined in vnc-auth-sasl.h and included in the main VncState. The configure script probes for SASL and automatically enables it if found, unless --disable-vnc-sasl was given to override it. Makefile | 7 Makefile.target | 5 b/qemu.sasl | 34 ++ b/vnc-auth-sasl.c | 626 ++++++++++++++++++++++++++++++++++++++++++++++++++++ b/vnc-auth-sasl.h | 67 +++++ configure | 34 ++ qemu-doc.texi | 97 ++++++++ vnc-auth-vencrypt.c | 12 vnc.c | 249 ++++++++++++++++++-- vnc.h | 31 ++ 10 files changed, 1129 insertions(+), 33 deletions(-) Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6724 c046a42c-6fe2-441c-8c8c-71466251a162
2009-03-06 21:27:28 +01:00
mechlistlen = strlen(mechlist);
vnc_write_u32(vs, mechlistlen);
vnc_write(vs, mechlist, mechlistlen);
vnc_flush(vs);
VNC_DEBUG("Wait for client mechname length\n");
vnc_read_when(vs, protocol_client_auth_sasl_mechname_len, 4);
return;
authabort:
vnc_client_error(vs);
}