qemu-e2k/block/commit.c

530 lines
15 KiB
C
Raw Normal View History

/*
* Live block commit
*
* Copyright Red Hat, Inc. 2012
*
* Authors:
* Jeff Cody <jcody@redhat.com>
* Based on stream.c by Stefan Hajnoczi
*
* This work is licensed under the terms of the GNU LGPL, version 2 or later.
* See the COPYING.LIB file in the top-level directory.
*
*/
#include "qemu/osdep.h"
#include "qemu/cutils.h"
#include "trace.h"
#include "block/block_int.h"
#include "block/blockjob_int.h"
2016-03-14 09:01:28 +01:00
#include "qapi/error.h"
#include "qapi/qmp/qerror.h"
#include "qemu/ratelimit.h"
#include "sysemu/block-backend.h"
enum {
/*
* Size of data buffer for populating the image file. This should be large
* enough to process multiple clusters in a single call, so that populating
* contiguous regions of the image is efficient.
*/
COMMIT_BUFFER_SIZE = 512 * 1024, /* in bytes */
};
typedef struct CommitBlockJob {
BlockJob common;
BlockDriverState *commit_top_bs;
BlockBackend *top;
BlockBackend *base;
BlockDriverState *base_bs;
BlockdevOnError on_error;
bool base_read_only;
char *backing_file_str;
} CommitBlockJob;
static int coroutine_fn commit_populate(BlockBackend *bs, BlockBackend *base,
int64_t offset, uint64_t bytes,
void *buf)
{
int ret = 0;
QEMUIOVector qiov;
struct iovec iov = {
.iov_base = buf,
.iov_len = bytes,
};
assert(bytes < SIZE_MAX);
qemu_iovec_init_external(&qiov, &iov, 1);
ret = blk_co_preadv(bs, offset, qiov.size, &qiov, 0);
if (ret < 0) {
return ret;
}
ret = blk_co_pwritev(base, offset, qiov.size, &qiov, 0);
if (ret < 0) {
return ret;
}
return 0;
}
static int commit_prepare(Job *job)
{
CommitBlockJob *s = container_of(job, CommitBlockJob, common.job);
/* Remove base node parent that still uses BLK_PERM_WRITE/RESIZE before
* the normal backing chain can be restored. */
blk_unref(s->base);
s->base = NULL;
/* FIXME: bdrv_drop_intermediate treats total failures and partial failures
* identically. Further work is needed to disambiguate these cases. */
return bdrv_drop_intermediate(s->commit_top_bs, s->base_bs,
s->backing_file_str);
}
static void commit_abort(Job *job)
{
CommitBlockJob *s = container_of(job, CommitBlockJob, common.job);
BlockDriverState *top_bs = blk_bs(s->top);
/* Make sure commit_top_bs and top stay around until bdrv_replace_node() */
bdrv_ref(top_bs);
bdrv_ref(s->commit_top_bs);
if (s->base) {
blk_unref(s->base);
}
/* free the blockers on the intermediate nodes so that bdrv_replace_nodes
* can succeed */
block_job_remove_all_bdrv(&s->common);
/* If bdrv_drop_intermediate() failed (or was not invoked), remove the
* commit filter driver from the backing chain now. Do this as the final
* step so that the 'consistent read' permission can be granted.
*
* XXX Can (or should) we somehow keep 'consistent read' blocked even
* after the failed/cancelled commit job is gone? If we already wrote
* something to base, the intermediate images aren't valid any more. */
bdrv_child_try_set_perm(s->commit_top_bs->backing, 0, BLK_PERM_ALL,
&error_abort);
bdrv_replace_node(s->commit_top_bs, backing_bs(s->commit_top_bs),
&error_abort);
bdrv_unref(s->commit_top_bs);
bdrv_unref(top_bs);
}
static void commit_clean(Job *job)
{
CommitBlockJob *s = container_of(job, CommitBlockJob, common.job);
/* restore base open flags here if appropriate (e.g., change the base back
* to r/o). These reopens do not need to be atomic, since we won't abort
* even on failure here */
if (s->base_read_only) {
bdrv_reopen_set_read_only(s->base_bs, true, NULL);
}
g_free(s->backing_file_str);
blk_unref(s->top);
}
static int coroutine_fn commit_run(Job *job, Error **errp)
{
CommitBlockJob *s = container_of(job, CommitBlockJob, common.job);
int64_t offset;
Improve block job rate limiting for small bandwidth values ratelimit_calculate_delay() previously reset the accounting every time slice, no matter how much data had been processed before. This had (at least) two consequences: 1. The minimum speed is rather large, e.g. 5 MiB/s for commit and stream. Not sure if there are real-world use cases where this would be a problem. Mirroring and backup over a slow link (e.g. DSL) would come to mind, though. 2. Tests for block job operations (e.g. cancel) were rather racy All block jobs currently use a time slice of 100ms. That's a reasonable value to get smooth output during regular operation. However this also meant that the state of block jobs changed every 100ms, no matter how low the configured limit was. On busy hosts, qemu often transferred additional chunks until the test case had a chance to cancel the job. Fix the block job rate limit code to delay for more than one time slice to address the above issues. To make it easier to handle oversized chunks we switch the semantics from returning a delay _before_ the current request to a delay _after_ the current request. If necessary, this delay consists of multiple time slice units. Since the mirror job sends multiple chunks in one go even if the rate limit was exceeded in between, we need to keep track of the start of the current time slice so we can correctly re-compute the delay for the updated amount of data. The minimum bandwidth now is 1 data unit per time slice. The block jobs are currently passing the amount of data transferred in sectors and using 100ms time slices, so this translates to 5120 bytes/second. With chunk sizes usually being O(512KiB), tests have plenty of time (O(100s)) to operate on block jobs. The chance of a race condition now is fairly remote, except possibly on insanely loaded systems. Signed-off-by: Sascha Silbe <silbe@linux.vnet.ibm.com> Message-id: 1467127721-9564-2-git-send-email-silbe@linux.vnet.ibm.com Reviewed-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Max Reitz <mreitz@redhat.com>
2016-06-28 17:28:41 +02:00
uint64_t delay_ns = 0;
int ret = 0;
int64_t n = 0; /* bytes */
void *buf = NULL;
int bytes_written = 0;
int64_t len, base_len;
ret = len = blk_getlength(s->top);
if (len < 0) {
goto out;
}
job_progress_set_remaining(&s->common.job, len);
ret = base_len = blk_getlength(s->base);
if (base_len < 0) {
goto out;
}
if (base_len < len) {
ret = blk_truncate(s->base, len, PREALLOC_MODE_OFF, NULL);
if (ret) {
goto out;
}
}
buf = blk_blockalign(s->top, COMMIT_BUFFER_SIZE);
for (offset = 0; offset < len; offset += n) {
bool copy;
/* Note that even when no rate limit is applied we need to yield
* with no pending I/O here so that bdrv_drain_all() returns.
*/
job_sleep_ns(&s->common.job, delay_ns);
if (job_is_cancelled(&s->common.job)) {
break;
}
/* Copy if allocated above the base */
ret = bdrv_is_allocated_above(blk_bs(s->top), blk_bs(s->base),
offset, COMMIT_BUFFER_SIZE, &n);
copy = (ret == 1);
trace_commit_one_iteration(s, offset, n, ret);
if (copy) {
ret = commit_populate(s->top, s->base, offset, n, buf);
bytes_written += n;
}
if (ret < 0) {
BlockErrorAction action =
block_job_error_action(&s->common, false, s->on_error, -ret);
if (action == BLOCK_ERROR_ACTION_REPORT) {
goto out;
} else {
n = 0;
continue;
}
}
/* Publish progress */
job_progress_update(&s->common.job, n);
Improve block job rate limiting for small bandwidth values ratelimit_calculate_delay() previously reset the accounting every time slice, no matter how much data had been processed before. This had (at least) two consequences: 1. The minimum speed is rather large, e.g. 5 MiB/s for commit and stream. Not sure if there are real-world use cases where this would be a problem. Mirroring and backup over a slow link (e.g. DSL) would come to mind, though. 2. Tests for block job operations (e.g. cancel) were rather racy All block jobs currently use a time slice of 100ms. That's a reasonable value to get smooth output during regular operation. However this also meant that the state of block jobs changed every 100ms, no matter how low the configured limit was. On busy hosts, qemu often transferred additional chunks until the test case had a chance to cancel the job. Fix the block job rate limit code to delay for more than one time slice to address the above issues. To make it easier to handle oversized chunks we switch the semantics from returning a delay _before_ the current request to a delay _after_ the current request. If necessary, this delay consists of multiple time slice units. Since the mirror job sends multiple chunks in one go even if the rate limit was exceeded in between, we need to keep track of the start of the current time slice so we can correctly re-compute the delay for the updated amount of data. The minimum bandwidth now is 1 data unit per time slice. The block jobs are currently passing the amount of data transferred in sectors and using 100ms time slices, so this translates to 5120 bytes/second. With chunk sizes usually being O(512KiB), tests have plenty of time (O(100s)) to operate on block jobs. The chance of a race condition now is fairly remote, except possibly on insanely loaded systems. Signed-off-by: Sascha Silbe <silbe@linux.vnet.ibm.com> Message-id: 1467127721-9564-2-git-send-email-silbe@linux.vnet.ibm.com Reviewed-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Max Reitz <mreitz@redhat.com>
2016-06-28 17:28:41 +02:00
if (copy) {
delay_ns = block_job_ratelimit_get_delay(&s->common, n);
} else {
delay_ns = 0;
Improve block job rate limiting for small bandwidth values ratelimit_calculate_delay() previously reset the accounting every time slice, no matter how much data had been processed before. This had (at least) two consequences: 1. The minimum speed is rather large, e.g. 5 MiB/s for commit and stream. Not sure if there are real-world use cases where this would be a problem. Mirroring and backup over a slow link (e.g. DSL) would come to mind, though. 2. Tests for block job operations (e.g. cancel) were rather racy All block jobs currently use a time slice of 100ms. That's a reasonable value to get smooth output during regular operation. However this also meant that the state of block jobs changed every 100ms, no matter how low the configured limit was. On busy hosts, qemu often transferred additional chunks until the test case had a chance to cancel the job. Fix the block job rate limit code to delay for more than one time slice to address the above issues. To make it easier to handle oversized chunks we switch the semantics from returning a delay _before_ the current request to a delay _after_ the current request. If necessary, this delay consists of multiple time slice units. Since the mirror job sends multiple chunks in one go even if the rate limit was exceeded in between, we need to keep track of the start of the current time slice so we can correctly re-compute the delay for the updated amount of data. The minimum bandwidth now is 1 data unit per time slice. The block jobs are currently passing the amount of data transferred in sectors and using 100ms time slices, so this translates to 5120 bytes/second. With chunk sizes usually being O(512KiB), tests have plenty of time (O(100s)) to operate on block jobs. The chance of a race condition now is fairly remote, except possibly on insanely loaded systems. Signed-off-by: Sascha Silbe <silbe@linux.vnet.ibm.com> Message-id: 1467127721-9564-2-git-send-email-silbe@linux.vnet.ibm.com Reviewed-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Max Reitz <mreitz@redhat.com>
2016-06-28 17:28:41 +02:00
}
}
ret = 0;
out:
qemu_vfree(buf);
return ret;
}
static const BlockJobDriver commit_job_driver = {
.job_driver = {
.instance_size = sizeof(CommitBlockJob),
.job_type = JOB_TYPE_COMMIT,
.free = block_job_free,
.user_resume = block_job_user_resume,
.drain = block_job_drain,
.run = commit_run,
.prepare = commit_prepare,
.abort = commit_abort,
.clean = commit_clean
},
};
static int coroutine_fn bdrv_commit_top_preadv(BlockDriverState *bs,
uint64_t offset, uint64_t bytes, QEMUIOVector *qiov, int flags)
{
return bdrv_co_preadv(bs->backing, offset, bytes, qiov, flags);
}
static void bdrv_commit_top_refresh_filename(BlockDriverState *bs, QDict *opts)
{
bdrv_refresh_filename(bs->backing->bs);
pstrcpy(bs->exact_filename, sizeof(bs->exact_filename),
bs->backing->bs->filename);
}
static void bdrv_commit_top_child_perm(BlockDriverState *bs, BdrvChild *c,
const BdrvChildRole *role,
BlockReopenQueue *reopen_queue,
uint64_t perm, uint64_t shared,
uint64_t *nperm, uint64_t *nshared)
{
*nperm = 0;
*nshared = BLK_PERM_ALL;
}
/* Dummy node that provides consistent read to its users without requiring it
* from its backing file and that allows writes on the backing file chain. */
static BlockDriver bdrv_commit_top = {
.format_name = "commit_top",
.bdrv_co_preadv = bdrv_commit_top_preadv,
.bdrv_co_block_status = bdrv_co_block_status_from_backing,
.bdrv_refresh_filename = bdrv_commit_top_refresh_filename,
.bdrv_child_perm = bdrv_commit_top_child_perm,
};
void commit_start(const char *job_id, BlockDriverState *bs,
BlockDriverState *base, BlockDriverState *top,
int creation_flags, int64_t speed,
BlockdevOnError on_error, const char *backing_file_str,
const char *filter_node_name, Error **errp)
{
CommitBlockJob *s;
BlockDriverState *iter;
BlockDriverState *commit_top_bs = NULL;
Error *local_err = NULL;
int ret;
assert(top != bs);
if (top == base) {
error_setg(errp, "Invalid files for merge: top and base are the same");
return;
}
s = block_job_create(job_id, &commit_job_driver, NULL, bs, 0, BLK_PERM_ALL,
speed, creation_flags, NULL, NULL, errp);
if (!s) {
return;
}
/* convert base to r/w, if necessary */
s->base_read_only = bdrv_is_read_only(base);
if (s->base_read_only) {
if (bdrv_reopen_set_read_only(base, false, errp) != 0) {
goto fail;
}
}
/* Insert commit_top block node above top, so we can block consistent read
* on the backing chain below it */
commit_top_bs = bdrv_new_open_driver(&bdrv_commit_top, filter_node_name, 0,
errp);
if (commit_top_bs == NULL) {
goto fail;
}
block: Skip implicit nodes in query-block/blockstats Commits 0db832f and 6cdbceb introduced the automatic insertion of filter nodes above the top layer of mirror and commit block jobs. The assumption made there was that since libvirt doesn't do node-level management of the block layer yet, it shouldn't be affected by added nodes. This is true as far as commands issued by libvirt are concerned. It only uses BlockBackend names to address nodes, so any operations it performs still operate on the root of the tree as intended. However, the assumption breaks down when you consider query commands, which return data for the wrong node now. These commands also return information on some child nodes (bs->file and/or bs->backing), which libvirt does make use of, and which refer to the wrong nodes, too. One of the consequences is that oVirt gets wrong information about the image size and stops the VM in response as long as a mirror or commit job is running: https://bugzilla.redhat.com/show_bug.cgi?id=1470634 This patch fixes the problem by hiding the implicit nodes created automatically by the mirror and commit block jobs in the output of query-block and BlockBackend-based query-blockstats as long as the user doesn't indicate that they are aware of those nodes by providing a node name for them in the QMP command to start the block job. The node-based commands query-named-block-nodes and query-blockstats with query-nodes=true still show all nodes, including implicit ones. This ensures that users that are capable of node-level management can still access the full information; users that only know BlockBackends won't use these commands. Cc: qemu-stable@nongnu.org Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Peter Krempa <pkrempa@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Tested-by: Eric Blake <eblake@redhat.com>
2017-07-18 17:24:05 +02:00
if (!filter_node_name) {
commit_top_bs->implicit = true;
}
commit_top_bs->total_sectors = top->total_sectors;
bdrv_set_aio_context(commit_top_bs, bdrv_get_aio_context(top));
bdrv_set_backing_hd(commit_top_bs, top, &local_err);
if (local_err) {
bdrv_unref(commit_top_bs);
commit_top_bs = NULL;
error_propagate(errp, local_err);
goto fail;
}
bdrv_replace_node(top, commit_top_bs, &local_err);
if (local_err) {
bdrv_unref(commit_top_bs);
commit_top_bs = NULL;
error_propagate(errp, local_err);
goto fail;
}
s->commit_top_bs = commit_top_bs;
bdrv_unref(commit_top_bs);
/* Block all nodes between top and base, because they will
* disappear from the chain after this operation. */
assert(bdrv_chain_contains(top, base));
for (iter = top; iter != base; iter = backing_bs(iter)) {
/* XXX BLK_PERM_WRITE needs to be allowed so we don't block ourselves
* at s->base (if writes are blocked for a node, they are also blocked
* for its backing file). The other options would be a second filter
* driver above s->base. */
ret = block_job_add_bdrv(&s->common, "intermediate node", iter, 0,
BLK_PERM_WRITE_UNCHANGED | BLK_PERM_WRITE,
errp);
if (ret < 0) {
goto fail;
}
}
ret = block_job_add_bdrv(&s->common, "base", base, 0, BLK_PERM_ALL, errp);
if (ret < 0) {
goto fail;
}
s->base = blk_new(BLK_PERM_CONSISTENT_READ
| BLK_PERM_WRITE
| BLK_PERM_RESIZE,
BLK_PERM_CONSISTENT_READ
| BLK_PERM_GRAPH_MOD
| BLK_PERM_WRITE_UNCHANGED);
ret = blk_insert_bs(s->base, base, errp);
if (ret < 0) {
goto fail;
}
s->base_bs = base;
/* Required permissions are already taken with block_job_add_bdrv() */
s->top = blk_new(0, BLK_PERM_ALL);
ret = blk_insert_bs(s->top, top, errp);
if (ret < 0) {
goto fail;
}
s->backing_file_str = g_strdup(backing_file_str);
s->on_error = on_error;
trace_commit_start(bs, base, top, s);
job_start(&s->common.job);
return;
fail:
if (s->base) {
blk_unref(s->base);
}
if (s->top) {
blk_unref(s->top);
}
if (commit_top_bs) {
bdrv_replace_node(commit_top_bs, top, &error_abort);
}
job_early_fail(&s->common.job);
}
block: Make bdrv_is_allocated() byte-based We are gradually moving away from sector-based interfaces, towards byte-based. In the common case, allocation is unlikely to ever use values that are not naturally sector-aligned, but it is possible that byte-based values will let us be more precise about allocation at the end of an unaligned file that can do byte-based access. Changing the signature of the function to use int64_t *pnum ensures that the compiler enforces that all callers are updated. For now, the io.c layer still assert()s that all callers are sector-aligned on input and that *pnum is sector-aligned on return to the caller, but that can be relaxed when a later patch implements byte-based block status. Therefore, this code adds usages like DIV_ROUND_UP(,BDRV_SECTOR_SIZE) to callers that still want aligned values, where the call might reasonbly give non-aligned results in the future; on the other hand, no rounding is needed for callers that should just continue to work with byte alignment. For the most part this patch is just the addition of scaling at the callers followed by inverse scaling at bdrv_is_allocated(). But some code, particularly bdrv_commit(), gets a lot simpler because it no longer has to mess with sectors; also, it is now possible to pass NULL if the caller does not care how much of the image is allocated beyond the initial offset. Leave comments where we can further simplify once a later patch eliminates the need for sector-aligned requests through bdrv_is_allocated(). For ease of review, bdrv_is_allocated_above() will be tackled separately. Signed-off-by: Eric Blake <eblake@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2017-07-07 14:44:57 +02:00
#define COMMIT_BUF_SIZE (2048 * BDRV_SECTOR_SIZE)
/* commit COW file into the raw image */
int bdrv_commit(BlockDriverState *bs)
{
BlockBackend *src, *backing;
BlockDriverState *backing_file_bs = NULL;
BlockDriverState *commit_top_bs = NULL;
BlockDriver *drv = bs->drv;
block: Make bdrv_is_allocated() byte-based We are gradually moving away from sector-based interfaces, towards byte-based. In the common case, allocation is unlikely to ever use values that are not naturally sector-aligned, but it is possible that byte-based values will let us be more precise about allocation at the end of an unaligned file that can do byte-based access. Changing the signature of the function to use int64_t *pnum ensures that the compiler enforces that all callers are updated. For now, the io.c layer still assert()s that all callers are sector-aligned on input and that *pnum is sector-aligned on return to the caller, but that can be relaxed when a later patch implements byte-based block status. Therefore, this code adds usages like DIV_ROUND_UP(,BDRV_SECTOR_SIZE) to callers that still want aligned values, where the call might reasonbly give non-aligned results in the future; on the other hand, no rounding is needed for callers that should just continue to work with byte alignment. For the most part this patch is just the addition of scaling at the callers followed by inverse scaling at bdrv_is_allocated(). But some code, particularly bdrv_commit(), gets a lot simpler because it no longer has to mess with sectors; also, it is now possible to pass NULL if the caller does not care how much of the image is allocated beyond the initial offset. Leave comments where we can further simplify once a later patch eliminates the need for sector-aligned requests through bdrv_is_allocated(). For ease of review, bdrv_is_allocated_above() will be tackled separately. Signed-off-by: Eric Blake <eblake@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2017-07-07 14:44:57 +02:00
int64_t offset, length, backing_length;
int ro;
block: Make bdrv_is_allocated() byte-based We are gradually moving away from sector-based interfaces, towards byte-based. In the common case, allocation is unlikely to ever use values that are not naturally sector-aligned, but it is possible that byte-based values will let us be more precise about allocation at the end of an unaligned file that can do byte-based access. Changing the signature of the function to use int64_t *pnum ensures that the compiler enforces that all callers are updated. For now, the io.c layer still assert()s that all callers are sector-aligned on input and that *pnum is sector-aligned on return to the caller, but that can be relaxed when a later patch implements byte-based block status. Therefore, this code adds usages like DIV_ROUND_UP(,BDRV_SECTOR_SIZE) to callers that still want aligned values, where the call might reasonbly give non-aligned results in the future; on the other hand, no rounding is needed for callers that should just continue to work with byte alignment. For the most part this patch is just the addition of scaling at the callers followed by inverse scaling at bdrv_is_allocated(). But some code, particularly bdrv_commit(), gets a lot simpler because it no longer has to mess with sectors; also, it is now possible to pass NULL if the caller does not care how much of the image is allocated beyond the initial offset. Leave comments where we can further simplify once a later patch eliminates the need for sector-aligned requests through bdrv_is_allocated(). For ease of review, bdrv_is_allocated_above() will be tackled separately. Signed-off-by: Eric Blake <eblake@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2017-07-07 14:44:57 +02:00
int64_t n;
int ret = 0;
uint8_t *buf = NULL;
Error *local_err = NULL;
if (!drv)
return -ENOMEDIUM;
if (!bs->backing) {
return -ENOTSUP;
}
if (bdrv_op_is_blocked(bs, BLOCK_OP_TYPE_COMMIT_SOURCE, NULL) ||
bdrv_op_is_blocked(bs->backing->bs, BLOCK_OP_TYPE_COMMIT_TARGET, NULL)) {
return -EBUSY;
}
ro = bs->backing->bs->read_only;
if (ro) {
if (bdrv_reopen_set_read_only(bs->backing->bs, false, NULL)) {
return -EACCES;
}
}
src = blk_new(BLK_PERM_CONSISTENT_READ, BLK_PERM_ALL);
backing = blk_new(BLK_PERM_WRITE | BLK_PERM_RESIZE, BLK_PERM_ALL);
ret = blk_insert_bs(src, bs, &local_err);
if (ret < 0) {
error_report_err(local_err);
goto ro_cleanup;
}
/* Insert commit_top block node above backing, so we can write to it */
backing_file_bs = backing_bs(bs);
commit_top_bs = bdrv_new_open_driver(&bdrv_commit_top, NULL, BDRV_O_RDWR,
&local_err);
if (commit_top_bs == NULL) {
error_report_err(local_err);
goto ro_cleanup;
}
bdrv_set_aio_context(commit_top_bs, bdrv_get_aio_context(backing_file_bs));
bdrv_set_backing_hd(commit_top_bs, backing_file_bs, &error_abort);
bdrv_set_backing_hd(bs, commit_top_bs, &error_abort);
ret = blk_insert_bs(backing, backing_file_bs, &local_err);
if (ret < 0) {
error_report_err(local_err);
goto ro_cleanup;
}
length = blk_getlength(src);
if (length < 0) {
ret = length;
goto ro_cleanup;
}
backing_length = blk_getlength(backing);
if (backing_length < 0) {
ret = backing_length;
goto ro_cleanup;
}
/* If our top snapshot is larger than the backing file image,
* grow the backing file image if possible. If not possible,
* we must return an error */
if (length > backing_length) {
ret = blk_truncate(backing, length, PREALLOC_MODE_OFF, &local_err);
if (ret < 0) {
error_report_err(local_err);
goto ro_cleanup;
}
}
/* blk_try_blockalign() for src will choose an alignment that works for
* backing as well, so no need to compare the alignment manually. */
block: Make bdrv_is_allocated() byte-based We are gradually moving away from sector-based interfaces, towards byte-based. In the common case, allocation is unlikely to ever use values that are not naturally sector-aligned, but it is possible that byte-based values will let us be more precise about allocation at the end of an unaligned file that can do byte-based access. Changing the signature of the function to use int64_t *pnum ensures that the compiler enforces that all callers are updated. For now, the io.c layer still assert()s that all callers are sector-aligned on input and that *pnum is sector-aligned on return to the caller, but that can be relaxed when a later patch implements byte-based block status. Therefore, this code adds usages like DIV_ROUND_UP(,BDRV_SECTOR_SIZE) to callers that still want aligned values, where the call might reasonbly give non-aligned results in the future; on the other hand, no rounding is needed for callers that should just continue to work with byte alignment. For the most part this patch is just the addition of scaling at the callers followed by inverse scaling at bdrv_is_allocated(). But some code, particularly bdrv_commit(), gets a lot simpler because it no longer has to mess with sectors; also, it is now possible to pass NULL if the caller does not care how much of the image is allocated beyond the initial offset. Leave comments where we can further simplify once a later patch eliminates the need for sector-aligned requests through bdrv_is_allocated(). For ease of review, bdrv_is_allocated_above() will be tackled separately. Signed-off-by: Eric Blake <eblake@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2017-07-07 14:44:57 +02:00
buf = blk_try_blockalign(src, COMMIT_BUF_SIZE);
if (buf == NULL) {
ret = -ENOMEM;
goto ro_cleanup;
}
block: Make bdrv_is_allocated() byte-based We are gradually moving away from sector-based interfaces, towards byte-based. In the common case, allocation is unlikely to ever use values that are not naturally sector-aligned, but it is possible that byte-based values will let us be more precise about allocation at the end of an unaligned file that can do byte-based access. Changing the signature of the function to use int64_t *pnum ensures that the compiler enforces that all callers are updated. For now, the io.c layer still assert()s that all callers are sector-aligned on input and that *pnum is sector-aligned on return to the caller, but that can be relaxed when a later patch implements byte-based block status. Therefore, this code adds usages like DIV_ROUND_UP(,BDRV_SECTOR_SIZE) to callers that still want aligned values, where the call might reasonbly give non-aligned results in the future; on the other hand, no rounding is needed for callers that should just continue to work with byte alignment. For the most part this patch is just the addition of scaling at the callers followed by inverse scaling at bdrv_is_allocated(). But some code, particularly bdrv_commit(), gets a lot simpler because it no longer has to mess with sectors; also, it is now possible to pass NULL if the caller does not care how much of the image is allocated beyond the initial offset. Leave comments where we can further simplify once a later patch eliminates the need for sector-aligned requests through bdrv_is_allocated(). For ease of review, bdrv_is_allocated_above() will be tackled separately. Signed-off-by: Eric Blake <eblake@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2017-07-07 14:44:57 +02:00
for (offset = 0; offset < length; offset += n) {
ret = bdrv_is_allocated(bs, offset, COMMIT_BUF_SIZE, &n);
if (ret < 0) {
goto ro_cleanup;
}
if (ret) {
block: Make bdrv_is_allocated() byte-based We are gradually moving away from sector-based interfaces, towards byte-based. In the common case, allocation is unlikely to ever use values that are not naturally sector-aligned, but it is possible that byte-based values will let us be more precise about allocation at the end of an unaligned file that can do byte-based access. Changing the signature of the function to use int64_t *pnum ensures that the compiler enforces that all callers are updated. For now, the io.c layer still assert()s that all callers are sector-aligned on input and that *pnum is sector-aligned on return to the caller, but that can be relaxed when a later patch implements byte-based block status. Therefore, this code adds usages like DIV_ROUND_UP(,BDRV_SECTOR_SIZE) to callers that still want aligned values, where the call might reasonbly give non-aligned results in the future; on the other hand, no rounding is needed for callers that should just continue to work with byte alignment. For the most part this patch is just the addition of scaling at the callers followed by inverse scaling at bdrv_is_allocated(). But some code, particularly bdrv_commit(), gets a lot simpler because it no longer has to mess with sectors; also, it is now possible to pass NULL if the caller does not care how much of the image is allocated beyond the initial offset. Leave comments where we can further simplify once a later patch eliminates the need for sector-aligned requests through bdrv_is_allocated(). For ease of review, bdrv_is_allocated_above() will be tackled separately. Signed-off-by: Eric Blake <eblake@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2017-07-07 14:44:57 +02:00
ret = blk_pread(src, offset, buf, n);
if (ret < 0) {
goto ro_cleanup;
}
block: Make bdrv_is_allocated() byte-based We are gradually moving away from sector-based interfaces, towards byte-based. In the common case, allocation is unlikely to ever use values that are not naturally sector-aligned, but it is possible that byte-based values will let us be more precise about allocation at the end of an unaligned file that can do byte-based access. Changing the signature of the function to use int64_t *pnum ensures that the compiler enforces that all callers are updated. For now, the io.c layer still assert()s that all callers are sector-aligned on input and that *pnum is sector-aligned on return to the caller, but that can be relaxed when a later patch implements byte-based block status. Therefore, this code adds usages like DIV_ROUND_UP(,BDRV_SECTOR_SIZE) to callers that still want aligned values, where the call might reasonbly give non-aligned results in the future; on the other hand, no rounding is needed for callers that should just continue to work with byte alignment. For the most part this patch is just the addition of scaling at the callers followed by inverse scaling at bdrv_is_allocated(). But some code, particularly bdrv_commit(), gets a lot simpler because it no longer has to mess with sectors; also, it is now possible to pass NULL if the caller does not care how much of the image is allocated beyond the initial offset. Leave comments where we can further simplify once a later patch eliminates the need for sector-aligned requests through bdrv_is_allocated(). For ease of review, bdrv_is_allocated_above() will be tackled separately. Signed-off-by: Eric Blake <eblake@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2017-07-07 14:44:57 +02:00
ret = blk_pwrite(backing, offset, buf, n, 0);
if (ret < 0) {
goto ro_cleanup;
}
}
}
if (drv->bdrv_make_empty) {
ret = drv->bdrv_make_empty(bs);
if (ret < 0) {
goto ro_cleanup;
}
blk_flush(src);
}
/*
* Make sure all data we wrote to the backing device is actually
* stable on disk.
*/
blk_flush(backing);
ret = 0;
ro_cleanup:
qemu_vfree(buf);
blk_unref(backing);
if (backing_file_bs) {
bdrv_set_backing_hd(bs, backing_file_bs, &error_abort);
}
bdrv_unref(commit_top_bs);
blk_unref(src);
if (ro) {
/* ignoring error return here */
bdrv_reopen_set_read_only(bs->backing->bs, true, NULL);
}
return ret;
}