qemu-e2k/qmp.c

740 lines
20 KiB
C
Raw Normal View History

/*
* QEMU Management Protocol
*
* Copyright IBM, Corp. 2011
*
* Authors:
* Anthony Liguori <aliguori@us.ibm.com>
*
* This work is licensed under the terms of the GNU GPL, version 2. See
* the COPYING file in the top-level directory.
*
* Contributions after 2012-01-13 are licensed under the terms of the
* GNU GPL, version 2 or (at your option) any later version.
*/
#include "qemu/osdep.h"
#include "qemu-version.h"
#include "qemu/cutils.h"
#include "qemu/option.h"
#include "monitor/monitor.h"
#include "sysemu/sysemu.h"
#include "qemu/config-file.h"
#include "qemu/uuid.h"
#include "chardev/char.h"
#include "ui/qemu-spice.h"
#include "ui/vnc.h"
#include "sysemu/kvm.h"
#include "sysemu/arch_init.h"
#include "hw/qdev.h"
#include "sysemu/blockdev.h"
#include "sysemu/block-backend.h"
#include "qom/qom-qobject.h"
#include "qapi/error.h"
#include "qapi/qapi-commands-block-core.h"
#include "qapi/qapi-commands-misc.h"
#include "qapi/qapi-commands-ui.h"
#include "qapi/qmp/qdict.h"
#include "qapi/qmp/qerror.h"
#include "qapi/qobject-input-visitor.h"
#include "hw/boards.h"
#include "qom/object_interfaces.h"
#include "hw/mem/memory-device.h"
#include "hw/acpi/acpi_dev_interface.h"
NameInfo *qmp_query_name(Error **errp)
{
NameInfo *info = g_malloc0(sizeof(*info));
if (qemu_name) {
info->has_name = true;
info->name = g_strdup(qemu_name);
}
return info;
}
VersionInfo *qmp_query_version(Error **errp)
{
VersionInfo *info = g_new0(VersionInfo, 1);
info->qemu = g_new0(VersionTriple, 1);
info->qemu->major = QEMU_VERSION_MAJOR;
info->qemu->minor = QEMU_VERSION_MINOR;
info->qemu->micro = QEMU_VERSION_MICRO;
info->package = g_strdup(QEMU_PKGVERSION);
return info;
}
KvmInfo *qmp_query_kvm(Error **errp)
{
KvmInfo *info = g_malloc0(sizeof(*info));
info->enabled = kvm_enabled();
info->present = kvm_available();
return info;
}
UuidInfo *qmp_query_uuid(Error **errp)
{
UuidInfo *info = g_malloc0(sizeof(*info));
info->UUID = qemu_uuid_unparse_strdup(&qemu_uuid);
return info;
}
void qmp_quit(Error **errp)
{
no_shutdown = 0;
qemu_system_shutdown_request(SHUTDOWN_CAUSE_HOST_QMP_QUIT);
}
void qmp_stop(Error **errp)
{
/* if there is a dump in background, we should wait until the dump
* finished */
if (dump_in_progress()) {
error_setg(errp, "There is a dump in process, please wait.");
return;
}
if (runstate_check(RUN_STATE_INMIGRATE)) {
autostart = 0;
} else {
vm_stop(RUN_STATE_PAUSED);
}
}
void qmp_system_reset(Error **errp)
{
qemu_system_reset_request(SHUTDOWN_CAUSE_HOST_QMP_SYSTEM_RESET);
}
void qmp_system_powerdown(Error **erp)
{
qemu_system_powerdown_request();
}
void qmp_cpu_add(int64_t id, Error **errp)
{
MachineClass *mc;
mc = MACHINE_GET_CLASS(current_machine);
if (mc->hot_add_cpu) {
mc->hot_add_cpu(id, errp);
} else {
error_setg(errp, "Not supported");
}
}
void qmp_x_exit_preconfig(Error **errp)
cli: add --preconfig option This option allows pausing QEMU in the new RUN_STATE_PRECONFIG state, allowing the configuration of QEMU from QMP before the machine jumps into board initialization code of machine_run_board_init() The intent is to allow management to query machine state and additionally configure it using previous query results within one QEMU instance (i.e. eliminate the need to start QEMU twice, 1st to query board specific parameters and 2nd for actual VM start using query results for additional parameters). The new option complements -S option and could be used with or without it. The difference is that -S pauses QEMU when the machine is completely initialized with all devices wired up and ready to execute guest code (QEMU needs only to unpause VCPUs to let guest execute its code), while the "preconfig" option pauses QEMU early before board specific init callback (machine_run_board_init) is executed and allows the configuration of machine parameters which will be used by board init code. When early introspection/configuration is done, command 'exit-preconfig' should be used to exit RUN_STATE_PRECONFIG and transition to the next requested state (i.e. if -S is used then QEMU will pause the second time when board/device initialization is completed or start guest execution if -S isn't provided on CLI) PS: Initially 'preconfig' is planned to be used for configuring numa topology depending on board specified possible cpus layout. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-Id: <1526059483-42847-1-git-send-email-imammedo@redhat.com> [ehabkost: Changed "since 2.13" to "since 3.0"] Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2018-05-11 19:24:43 +02:00
{
if (!runstate_check(RUN_STATE_PRECONFIG)) {
error_setg(errp, "The command is permitted only in '%s' state",
RunState_str(RUN_STATE_PRECONFIG));
return;
}
qemu_exit_preconfig_request();
}
void qmp_cont(Error **errp)
{
BlockBackend *blk;
Error *local_err = NULL;
/* if there is a dump in background, we should wait until the dump
* finished */
if (dump_in_progress()) {
error_setg(errp, "There is a dump in process, please wait.");
return;
}
if (runstate_needs_reset()) {
error_setg(errp, "Resetting the Virtual Machine is required");
return;
} else if (runstate_check(RUN_STATE_SUSPENDED)) {
return;
}
for (blk = blk_next(NULL); blk; blk = blk_next(blk)) {
blk_iostatus_reset(blk);
}
block: Inactivate BDS when migration completes So far, live migration with shared storage meant that the image is in a not-really-ready don't-touch-me state on the destination while the source is still actively using it, but after completing the migration, the image was fully opened on both sides. This is bad. This patch adds a block driver callback to inactivate images on the source before completing the migration. Inactivation means that it goes to a state as if it was just live migrated to the qemu instance on the source (i.e. BDRV_O_INACTIVE is set). You're then supposed to continue either on the source or on the destination, which takes ownership of the image. A typical migration looks like this now with respect to disk images: 1. Destination qemu is started, the image is opened with BDRV_O_INACTIVE. The image is fully opened on the source. 2. Migration is about to complete. The source flushes the image and inactivates it. Now both sides have the image opened with BDRV_O_INACTIVE and are expecting the other side to still modify it. 3. One side (the destination on success) continues and calls bdrv_invalidate_all() in order to take ownership of the image again. This removes BDRV_O_INACTIVE on the resuming side; the flag remains set on the other side. This ensures that the same image isn't written to by both instances (unless both are resumed, but then you get what you deserve). This is important because .bdrv_close for non-BDRV_O_INACTIVE images could write to the image file, which is definitely forbidden while another host is using the image. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: John Snow <jsnow@redhat.com>
2015-12-22 14:07:08 +01:00
/* Continuing after completed migration. Images have been inactivated to
* allow the destination to take control. Need to get control back now.
*
* If there are no inactive block nodes (e.g. because the VM was just
* paused rather than completing a migration), bdrv_inactivate_all() simply
* doesn't do anything. */
bdrv_invalidate_cache_all(&local_err);
if (local_err) {
error_propagate(errp, local_err);
return;
block: Inactivate BDS when migration completes So far, live migration with shared storage meant that the image is in a not-really-ready don't-touch-me state on the destination while the source is still actively using it, but after completing the migration, the image was fully opened on both sides. This is bad. This patch adds a block driver callback to inactivate images on the source before completing the migration. Inactivation means that it goes to a state as if it was just live migrated to the qemu instance on the source (i.e. BDRV_O_INACTIVE is set). You're then supposed to continue either on the source or on the destination, which takes ownership of the image. A typical migration looks like this now with respect to disk images: 1. Destination qemu is started, the image is opened with BDRV_O_INACTIVE. The image is fully opened on the source. 2. Migration is about to complete. The source flushes the image and inactivates it. Now both sides have the image opened with BDRV_O_INACTIVE and are expecting the other side to still modify it. 3. One side (the destination on success) continues and calls bdrv_invalidate_all() in order to take ownership of the image again. This removes BDRV_O_INACTIVE on the resuming side; the flag remains set on the other side. This ensures that the same image isn't written to by both instances (unless both are resumed, but then you get what you deserve). This is important because .bdrv_close for non-BDRV_O_INACTIVE images could write to the image file, which is definitely forbidden while another host is using the image. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: John Snow <jsnow@redhat.com>
2015-12-22 14:07:08 +01:00
}
if (runstate_check(RUN_STATE_INMIGRATE)) {
autostart = 1;
} else {
vm_start();
}
}
void qmp_system_wakeup(Error **errp)
{
qemu_system_wakeup_request(QEMU_WAKEUP_REASON_OTHER);
}
ObjectPropertyInfoList *qmp_qom_list(const char *path, Error **errp)
{
Object *obj;
bool ambiguous = false;
ObjectPropertyInfoList *props = NULL;
ObjectProperty *prop;
ObjectPropertyIterator iter;
obj = object_resolve_path(path, &ambiguous);
if (obj == NULL) {
if (ambiguous) {
error_setg(errp, "Path '%s' is ambiguous", path);
} else {
error_set(errp, ERROR_CLASS_DEVICE_NOT_FOUND,
"Device '%s' not found", path);
}
return NULL;
}
object_property_iter_init(&iter, obj);
while ((prop = object_property_iter_next(&iter))) {
ObjectPropertyInfoList *entry = g_malloc0(sizeof(*entry));
entry->value = g_malloc0(sizeof(ObjectPropertyInfo));
entry->next = props;
props = entry;
entry->value->name = g_strdup(prop->name);
entry->value->type = g_strdup(prop->type);
}
return props;
}
void qmp_qom_set(const char *path, const char *property, QObject *value,
Error **errp)
{
Object *obj;
obj = object_resolve_path(path, NULL);
if (!obj) {
qmp: Wean off qerror_report() The traditional QMP command handler interface int qmp_FOO(Monitor *mon, const QDict *params, QObject **ret_data); doesn't provide for returning an Error object. Instead, the handler is expected to stash it in the monitor with qerror_report(). When we rebased QMP on top of QAPI, we didn't change this interface. Instead, commit 776574d introduced "middle mode" as a temporary aid for converting existing QMP commands to QAPI one by one. More than three years later, we're still using it. Middle mode has two effects: * Instead of the native input marshallers static void qmp_marshal_input_FOO(QDict *, QObject **, Error **) it generates input marshallers conforming to the traditional QMP command handler interface. * It suppresses generation of code to register them with qmp_register_command() This permits giving them internal linkage. As long as we need qmp-commands.hx, we can't use the registry behind qmp_register_command(), so the latter has to stay for now. The former has to go to get rid of qerror_report(). Changing all QMP commands to fit the QAPI mold in one go was impractical back when we started, but by now there are just a few stragglers left: do_qmp_capabilities(), qmp_qom_set(), qmp_qom_get(), qmp_object_add(), qmp_netdev_add(), do_device_add(). Switch middle mode to generate native input marshallers, and adapt the stragglers. Simplifies both the monitor code and the stragglers. Rename do_qmp_capabilities() to qmp_capabilities(), and do_device_add() to qmp_device_add, because that's how QMP command handlers are named today. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
2015-03-13 17:25:50 +01:00
error_set(errp, ERROR_CLASS_DEVICE_NOT_FOUND,
"Device '%s' not found", path);
qmp: Wean off qerror_report() The traditional QMP command handler interface int qmp_FOO(Monitor *mon, const QDict *params, QObject **ret_data); doesn't provide for returning an Error object. Instead, the handler is expected to stash it in the monitor with qerror_report(). When we rebased QMP on top of QAPI, we didn't change this interface. Instead, commit 776574d introduced "middle mode" as a temporary aid for converting existing QMP commands to QAPI one by one. More than three years later, we're still using it. Middle mode has two effects: * Instead of the native input marshallers static void qmp_marshal_input_FOO(QDict *, QObject **, Error **) it generates input marshallers conforming to the traditional QMP command handler interface. * It suppresses generation of code to register them with qmp_register_command() This permits giving them internal linkage. As long as we need qmp-commands.hx, we can't use the registry behind qmp_register_command(), so the latter has to stay for now. The former has to go to get rid of qerror_report(). Changing all QMP commands to fit the QAPI mold in one go was impractical back when we started, but by now there are just a few stragglers left: do_qmp_capabilities(), qmp_qom_set(), qmp_qom_get(), qmp_object_add(), qmp_netdev_add(), do_device_add(). Switch middle mode to generate native input marshallers, and adapt the stragglers. Simplifies both the monitor code and the stragglers. Rename do_qmp_capabilities() to qmp_capabilities(), and do_device_add() to qmp_device_add, because that's how QMP command handlers are named today. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
2015-03-13 17:25:50 +01:00
return;
}
qmp: Wean off qerror_report() The traditional QMP command handler interface int qmp_FOO(Monitor *mon, const QDict *params, QObject **ret_data); doesn't provide for returning an Error object. Instead, the handler is expected to stash it in the monitor with qerror_report(). When we rebased QMP on top of QAPI, we didn't change this interface. Instead, commit 776574d introduced "middle mode" as a temporary aid for converting existing QMP commands to QAPI one by one. More than three years later, we're still using it. Middle mode has two effects: * Instead of the native input marshallers static void qmp_marshal_input_FOO(QDict *, QObject **, Error **) it generates input marshallers conforming to the traditional QMP command handler interface. * It suppresses generation of code to register them with qmp_register_command() This permits giving them internal linkage. As long as we need qmp-commands.hx, we can't use the registry behind qmp_register_command(), so the latter has to stay for now. The former has to go to get rid of qerror_report(). Changing all QMP commands to fit the QAPI mold in one go was impractical back when we started, but by now there are just a few stragglers left: do_qmp_capabilities(), qmp_qom_set(), qmp_qom_get(), qmp_object_add(), qmp_netdev_add(), do_device_add(). Switch middle mode to generate native input marshallers, and adapt the stragglers. Simplifies both the monitor code and the stragglers. Rename do_qmp_capabilities() to qmp_capabilities(), and do_device_add() to qmp_device_add, because that's how QMP command handlers are named today. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
2015-03-13 17:25:50 +01:00
object_property_set_qobject(obj, value, property, errp);
}
QObject *qmp_qom_get(const char *path, const char *property, Error **errp)
{
Object *obj;
obj = object_resolve_path(path, NULL);
if (!obj) {
qmp: Wean off qerror_report() The traditional QMP command handler interface int qmp_FOO(Monitor *mon, const QDict *params, QObject **ret_data); doesn't provide for returning an Error object. Instead, the handler is expected to stash it in the monitor with qerror_report(). When we rebased QMP on top of QAPI, we didn't change this interface. Instead, commit 776574d introduced "middle mode" as a temporary aid for converting existing QMP commands to QAPI one by one. More than three years later, we're still using it. Middle mode has two effects: * Instead of the native input marshallers static void qmp_marshal_input_FOO(QDict *, QObject **, Error **) it generates input marshallers conforming to the traditional QMP command handler interface. * It suppresses generation of code to register them with qmp_register_command() This permits giving them internal linkage. As long as we need qmp-commands.hx, we can't use the registry behind qmp_register_command(), so the latter has to stay for now. The former has to go to get rid of qerror_report(). Changing all QMP commands to fit the QAPI mold in one go was impractical back when we started, but by now there are just a few stragglers left: do_qmp_capabilities(), qmp_qom_set(), qmp_qom_get(), qmp_object_add(), qmp_netdev_add(), do_device_add(). Switch middle mode to generate native input marshallers, and adapt the stragglers. Simplifies both the monitor code and the stragglers. Rename do_qmp_capabilities() to qmp_capabilities(), and do_device_add() to qmp_device_add, because that's how QMP command handlers are named today. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
2015-03-13 17:25:50 +01:00
error_set(errp, ERROR_CLASS_DEVICE_NOT_FOUND,
"Device '%s' not found", path);
return NULL;
}
return object_property_get_qobject(obj, property, errp);
}
void qmp_set_password(const char *protocol, const char *password,
bool has_connected, const char *connected, Error **errp)
{
int disconnect_if_connected = 0;
int fail_if_connected = 0;
int rc;
if (has_connected) {
if (strcmp(connected, "fail") == 0) {
fail_if_connected = 1;
} else if (strcmp(connected, "disconnect") == 0) {
disconnect_if_connected = 1;
} else if (strcmp(connected, "keep") == 0) {
/* nothing */
} else {
error_setg(errp, QERR_INVALID_PARAMETER, "connected");
return;
}
}
if (strcmp(protocol, "spice") == 0) {
if (!qemu_using_spice(errp)) {
return;
}
rc = qemu_spice_set_passwd(password, fail_if_connected,
disconnect_if_connected);
if (rc != 0) {
error_setg(errp, QERR_SET_PASSWD_FAILED);
}
return;
}
if (strcmp(protocol, "vnc") == 0) {
if (fail_if_connected || disconnect_if_connected) {
/* vnc supports "connected=keep" only */
error_setg(errp, QERR_INVALID_PARAMETER, "connected");
return;
}
/* Note that setting an empty password will not disable login through
* this interface. */
rc = vnc_display_password(NULL, password);
if (rc < 0) {
error_setg(errp, QERR_SET_PASSWD_FAILED);
}
return;
}
error_setg(errp, QERR_INVALID_PARAMETER, "protocol");
}
void qmp_expire_password(const char *protocol, const char *whenstr,
Error **errp)
{
time_t when;
int rc;
if (strcmp(whenstr, "now") == 0) {
when = 0;
} else if (strcmp(whenstr, "never") == 0) {
when = TIME_MAX;
} else if (whenstr[0] == '+') {
when = time(NULL) + strtoull(whenstr+1, NULL, 10);
} else {
when = strtoull(whenstr, NULL, 10);
}
if (strcmp(protocol, "spice") == 0) {
if (!qemu_using_spice(errp)) {
return;
}
rc = qemu_spice_set_pw_expire(when);
if (rc != 0) {
error_setg(errp, QERR_SET_PASSWD_FAILED);
}
return;
}
if (strcmp(protocol, "vnc") == 0) {
rc = vnc_display_pw_expire(NULL, when);
if (rc != 0) {
error_setg(errp, QERR_SET_PASSWD_FAILED);
}
return;
}
error_setg(errp, QERR_INVALID_PARAMETER, "protocol");
}
#ifdef CONFIG_VNC
void qmp_change_vnc_password(const char *password, Error **errp)
{
if (vnc_display_password(NULL, password) < 0) {
error_setg(errp, QERR_SET_PASSWD_FAILED);
}
}
static void qmp_change_vnc_listen(const char *target, Error **errp)
{
QemuOptsList *olist = qemu_find_opts("vnc");
QemuOpts *opts;
if (strstr(target, "id=")) {
error_setg(errp, "id not supported");
return;
}
opts = qemu_opts_find(olist, "default");
if (opts) {
qemu_opts_del(opts);
}
QemuOpts: Wean off qerror_report_err() qerror_report_err() is a transitional interface to help with converting existing monitor commands to QMP. It should not be used elsewhere. The only remaining user in qemu-option.c is qemu_opts_parse(). Is it used in QMP context? If not, we can simply replace qerror_report_err() by error_report_err(). The uses in qemu-img.c, qemu-io.c, qemu-nbd.c and under tests/ are clearly not in QMP context. The uses in vl.c aren't either, because the only QMP command handlers there are qmp_query_status() and qmp_query_machines(), and they don't call it. Remaining uses: * drive_def(): Command line -drive and such, HMP drive_add and pci_add * hmp_chardev_add(): HMP chardev-add * monitor_parse_command(): HMP core * tmp_config_parse(): Command line -tpmdev * net_host_device_add(): HMP host_net_add * net_client_parse(): Command line -net and -netdev * qemu_global_option(): Command line -global * vnc_parse_func(): Command line -display, -vnc, default display, HMP change, QMP change. Bummer. * qemu_pci_hot_add_nic(): HMP pci_add * usb_net_init(): Command line -usbdevice, HMP usb_add Propagate errors through qemu_opts_parse(). Create a convenience function qemu_opts_parse_noisily() that passes errors to error_report_err(). Switch all non-QMP users outside tests to it. That leaves vnc_parse_func(). Propagate errors through it. Since I'm touching it anyway, rename it to vnc_parse(). Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
2015-02-13 12:50:26 +01:00
opts = vnc_parse(target, errp);
if (!opts) {
return;
}
vnc_display_open("default", errp);
}
static void qmp_change_vnc(const char *target, bool has_arg, const char *arg,
Error **errp)
{
if (strcmp(target, "passwd") == 0 || strcmp(target, "password") == 0) {
if (!has_arg) {
error_setg(errp, QERR_MISSING_PARAMETER, "password");
} else {
qmp_change_vnc_password(arg, errp);
}
} else {
qmp_change_vnc_listen(target, errp);
}
}
#endif /* !CONFIG_VNC */
void qmp_change(const char *device, const char *target,
bool has_arg, const char *arg, Error **errp)
{
if (strcmp(device, "vnc") == 0) {
qapi: add conditions to VNC type/commands/events on the schema Add #if defined(CONFIG_VNC) in generated code, and adjust the qmp/hmp code accordingly. query-qmp-schema no longer reports the command/events etc as available when disabled at compile. Commands made conditional: * query-vnc, query-vnc-servers, change-vnc-password Before the patch, the commands for !CONFIG_VNC are stubs that fail like this: {"error": {"class": "GenericError", "desc": "The feature 'vnc' is not enabled"}} Afterwards, they fail like this: {"error": {"class": "CommandNotFound", "desc": "The command FOO has not been found"}} I call that an improvement, because it lets clients distinguish between command unavailable (class CommandNotFound) and command failed (class GenericError). Events made conditional: * VNC_CONNECTED, VNC_INITIALIZED, VNC_DISCONNECTED HMP change: * info vnc Will return "unknown command: 'info vnc'" when VNC is compiled out (same as error for spice when --disable-spice) Occurrences of VNC (case insensitive) in the schema that aren't covered by this change: * add_client Command has other uses, including "socket bases character devices". These are unconditional as far as I can tell. * set_password, expire_password In theory, these commands could be used for managing any service's password. In practice, they're used for VNC and SPICE services. They're documented for "remote display session" / "remote display server". The service is selected by argument @protocol. The code special-cases protocol-specific argument checking, then calls a protocol-specific function to do the work. If it fails, the command fails with "Could not set password". It does when the service isn't compiled in (it's a stub then). We could make these commands conditional on the conjunction of all services [currently: defined(CONFIG_VNC) || defined(CONFIG_SPICE)], but I doubt it's worthwhile. * change Command has other uses, namely changing media. This patch inlines a stub; no functional change. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20180703155648.11933-14-marcandre.lureau@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2018-07-03 17:56:47 +02:00
#ifdef CONFIG_VNC
qmp_change_vnc(target, has_arg, arg, errp);
qapi: add conditions to VNC type/commands/events on the schema Add #if defined(CONFIG_VNC) in generated code, and adjust the qmp/hmp code accordingly. query-qmp-schema no longer reports the command/events etc as available when disabled at compile. Commands made conditional: * query-vnc, query-vnc-servers, change-vnc-password Before the patch, the commands for !CONFIG_VNC are stubs that fail like this: {"error": {"class": "GenericError", "desc": "The feature 'vnc' is not enabled"}} Afterwards, they fail like this: {"error": {"class": "CommandNotFound", "desc": "The command FOO has not been found"}} I call that an improvement, because it lets clients distinguish between command unavailable (class CommandNotFound) and command failed (class GenericError). Events made conditional: * VNC_CONNECTED, VNC_INITIALIZED, VNC_DISCONNECTED HMP change: * info vnc Will return "unknown command: 'info vnc'" when VNC is compiled out (same as error for spice when --disable-spice) Occurrences of VNC (case insensitive) in the schema that aren't covered by this change: * add_client Command has other uses, including "socket bases character devices". These are unconditional as far as I can tell. * set_password, expire_password In theory, these commands could be used for managing any service's password. In practice, they're used for VNC and SPICE services. They're documented for "remote display session" / "remote display server". The service is selected by argument @protocol. The code special-cases protocol-specific argument checking, then calls a protocol-specific function to do the work. If it fails, the command fails with "Could not set password". It does when the service isn't compiled in (it's a stub then). We could make these commands conditional on the conjunction of all services [currently: defined(CONFIG_VNC) || defined(CONFIG_SPICE)], but I doubt it's worthwhile. * change Command has other uses, namely changing media. This patch inlines a stub; no functional change. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20180703155648.11933-14-marcandre.lureau@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2018-07-03 17:56:47 +02:00
#else
error_setg(errp, QERR_FEATURE_DISABLED, "vnc");
#endif
} else {
qmp_blockdev_change_medium(true, device, false, NULL, target,
has_arg, arg, false, 0, errp);
}
}
static void qom_list_types_tramp(ObjectClass *klass, void *data)
{
ObjectTypeInfoList *e, **pret = data;
ObjectTypeInfo *info;
ObjectClass *parent = object_class_get_parent(klass);
info = g_malloc0(sizeof(*info));
info->name = g_strdup(object_class_get_name(klass));
info->has_abstract = info->abstract = object_class_is_abstract(klass);
if (parent) {
info->has_parent = true;
info->parent = g_strdup(object_class_get_name(parent));
}
e = g_malloc0(sizeof(*e));
e->value = info;
e->next = *pret;
*pret = e;
}
ObjectTypeInfoList *qmp_qom_list_types(bool has_implements,
const char *implements,
bool has_abstract,
bool abstract,
Error **errp)
{
ObjectTypeInfoList *ret = NULL;
object_class_foreach(qom_list_types_tramp, implements, abstract, &ret);
return ret;
}
/* Return a DevicePropertyInfo for a qdev property.
*
* If a qdev property with the given name does not exist, use the given default
* type. If the qdev property info should not be shown, return NULL.
*
* The caller must free the return value.
*/
static ObjectPropertyInfo *make_device_property_info(ObjectClass *klass,
const char *name,
const char *default_type,
const char *description)
{
ObjectPropertyInfo *info;
Property *prop;
do {
for (prop = DEVICE_CLASS(klass)->props; prop && prop->name; prop++) {
if (strcmp(name, prop->name) != 0) {
continue;
}
/*
* TODO Properties without a parser are just for dirty hacks.
* qdev_prop_ptr is the only such PropertyInfo. It's marked
* for removal. This conditional should be removed along with
* it.
*/
if (!prop->info->set && !prop->info->create) {
return NULL; /* no way to set it, don't show */
}
info = g_malloc0(sizeof(*info));
info->name = g_strdup(prop->name);
info->type = default_type ? g_strdup(default_type)
: g_strdup(prop->info->name);
qmp: Print descriptions of object properties Add a new "description" field to DevicePropertyInfo. The descriptions can serve as documentation in the code, and they can be used to provide better help. For example: $./qemu-system-x86_64 -device virtio-blk-pci,? Before this patch: virtio-blk-pci.iothread=link<iothread> virtio-blk-pci.x-data-plane=bool virtio-blk-pci.scsi=bool virtio-blk-pci.config-wce=bool virtio-blk-pci.serial=str virtio-blk-pci.secs=uint32 virtio-blk-pci.heads=uint32 virtio-blk-pci.cyls=uint32 virtio-blk-pci.discard_granularity=uint32 virtio-blk-pci.bootindex=int32 virtio-blk-pci.opt_io_size=uint32 virtio-blk-pci.min_io_size=uint16 virtio-blk-pci.physical_block_size=uint16 virtio-blk-pci.logical_block_size=uint16 virtio-blk-pci.drive=str virtio-blk-pci.virtio-backend=child<virtio-blk-device> virtio-blk-pci.command_serr_enable=on/off virtio-blk-pci.multifunction=on/off virtio-blk-pci.rombar=uint32 virtio-blk-pci.romfile=str virtio-blk-pci.addr=pci-devfn virtio-blk-pci.event_idx=on/off virtio-blk-pci.indirect_desc=on/off virtio-blk-pci.vectors=uint32 virtio-blk-pci.ioeventfd=on/off virtio-blk-pci.class=uint32 After: virtio-blk-pci.iothread=link<iothread> virtio-blk-pci.x-data-plane=bool (on/off) virtio-blk-pci.scsi=bool (on/off) virtio-blk-pci.config-wce=bool (on/off) virtio-blk-pci.serial=str virtio-blk-pci.secs=uint32 virtio-blk-pci.heads=uint32 virtio-blk-pci.cyls=uint32 virtio-blk-pci.discard_granularity=uint32 virtio-blk-pci.bootindex=int32 virtio-blk-pci.opt_io_size=uint32 virtio-blk-pci.min_io_size=uint16 virtio-blk-pci.physical_block_size=uint16 (A power of two between 512 and 32768) virtio-blk-pci.logical_block_size=uint16 (A power of two between 512 and 32768) virtio-blk-pci.drive=str (ID of a drive to use as a backend) virtio-blk-pci.virtio-backend=child<virtio-blk-device> virtio-blk-pci.command_serr_enable=bool (on/off) virtio-blk-pci.multifunction=bool (on/off) virtio-blk-pci.rombar=uint32 virtio-blk-pci.romfile=str virtio-blk-pci.addr=int32 (Slot and optional function number, example: 06.0 or 06) virtio-blk-pci.event_idx=bool (on/off) virtio-blk-pci.indirect_desc=bool (on/off) virtio-blk-pci.vectors=uint32 virtio-blk-pci.ioeventfd=bool (on/off) virtio-blk-pci.class=uint32 Cc: Markus Armbruster <armbru@redhat.com> Signed-off-by: Gonglei <arei.gonglei@huawei.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Andreas Färber <afaerber@suse.de>
2014-10-07 08:33:23 +02:00
info->has_description = !!prop->info->description;
info->description = g_strdup(prop->info->description);
return info;
}
klass = object_class_get_parent(klass);
} while (klass != object_class_by_name(TYPE_DEVICE));
/* Not a qdev property, use the default type */
info = g_malloc0(sizeof(*info));
info->name = g_strdup(name);
info->type = g_strdup(default_type);
qmp: Print descriptions of object properties Add a new "description" field to DevicePropertyInfo. The descriptions can serve as documentation in the code, and they can be used to provide better help. For example: $./qemu-system-x86_64 -device virtio-blk-pci,? Before this patch: virtio-blk-pci.iothread=link<iothread> virtio-blk-pci.x-data-plane=bool virtio-blk-pci.scsi=bool virtio-blk-pci.config-wce=bool virtio-blk-pci.serial=str virtio-blk-pci.secs=uint32 virtio-blk-pci.heads=uint32 virtio-blk-pci.cyls=uint32 virtio-blk-pci.discard_granularity=uint32 virtio-blk-pci.bootindex=int32 virtio-blk-pci.opt_io_size=uint32 virtio-blk-pci.min_io_size=uint16 virtio-blk-pci.physical_block_size=uint16 virtio-blk-pci.logical_block_size=uint16 virtio-blk-pci.drive=str virtio-blk-pci.virtio-backend=child<virtio-blk-device> virtio-blk-pci.command_serr_enable=on/off virtio-blk-pci.multifunction=on/off virtio-blk-pci.rombar=uint32 virtio-blk-pci.romfile=str virtio-blk-pci.addr=pci-devfn virtio-blk-pci.event_idx=on/off virtio-blk-pci.indirect_desc=on/off virtio-blk-pci.vectors=uint32 virtio-blk-pci.ioeventfd=on/off virtio-blk-pci.class=uint32 After: virtio-blk-pci.iothread=link<iothread> virtio-blk-pci.x-data-plane=bool (on/off) virtio-blk-pci.scsi=bool (on/off) virtio-blk-pci.config-wce=bool (on/off) virtio-blk-pci.serial=str virtio-blk-pci.secs=uint32 virtio-blk-pci.heads=uint32 virtio-blk-pci.cyls=uint32 virtio-blk-pci.discard_granularity=uint32 virtio-blk-pci.bootindex=int32 virtio-blk-pci.opt_io_size=uint32 virtio-blk-pci.min_io_size=uint16 virtio-blk-pci.physical_block_size=uint16 (A power of two between 512 and 32768) virtio-blk-pci.logical_block_size=uint16 (A power of two between 512 and 32768) virtio-blk-pci.drive=str (ID of a drive to use as a backend) virtio-blk-pci.virtio-backend=child<virtio-blk-device> virtio-blk-pci.command_serr_enable=bool (on/off) virtio-blk-pci.multifunction=bool (on/off) virtio-blk-pci.rombar=uint32 virtio-blk-pci.romfile=str virtio-blk-pci.addr=int32 (Slot and optional function number, example: 06.0 or 06) virtio-blk-pci.event_idx=bool (on/off) virtio-blk-pci.indirect_desc=bool (on/off) virtio-blk-pci.vectors=uint32 virtio-blk-pci.ioeventfd=bool (on/off) virtio-blk-pci.class=uint32 Cc: Markus Armbruster <armbru@redhat.com> Signed-off-by: Gonglei <arei.gonglei@huawei.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Andreas Färber <afaerber@suse.de>
2014-10-07 08:33:23 +02:00
info->has_description = !!description;
info->description = g_strdup(description);
return info;
}
ObjectPropertyInfoList *qmp_device_list_properties(const char *typename,
Error **errp)
{
ObjectClass *klass;
Object *obj;
ObjectProperty *prop;
ObjectPropertyIterator iter;
ObjectPropertyInfoList *prop_list = NULL;
klass = object_class_by_name(typename);
if (klass == NULL) {
error_set(errp, ERROR_CLASS_DEVICE_NOT_FOUND,
"Device '%s' not found", typename);
return NULL;
}
klass = object_class_dynamic_cast(klass, TYPE_DEVICE);
if (klass == NULL) {
error_setg(errp, QERR_INVALID_PARAMETER_VALUE, "typename", TYPE_DEVICE);
return NULL;
}
if (object_class_is_abstract(klass)) {
error_setg(errp, QERR_INVALID_PARAMETER_VALUE, "typename",
"non-abstract device type");
return NULL;
}
obj = object_new(typename);
object_property_iter_init(&iter, obj);
while ((prop = object_property_iter_next(&iter))) {
ObjectPropertyInfo *info;
ObjectPropertyInfoList *entry;
/* Skip Object and DeviceState properties */
if (strcmp(prop->name, "type") == 0 ||
strcmp(prop->name, "realized") == 0 ||
strcmp(prop->name, "hotpluggable") == 0 ||
strcmp(prop->name, "hotplugged") == 0 ||
strcmp(prop->name, "parent_bus") == 0) {
continue;
}
/* Skip legacy properties since they are just string versions of
* properties that we already list.
*/
if (strstart(prop->name, "legacy-", NULL)) {
continue;
}
qmp: Print descriptions of object properties Add a new "description" field to DevicePropertyInfo. The descriptions can serve as documentation in the code, and they can be used to provide better help. For example: $./qemu-system-x86_64 -device virtio-blk-pci,? Before this patch: virtio-blk-pci.iothread=link<iothread> virtio-blk-pci.x-data-plane=bool virtio-blk-pci.scsi=bool virtio-blk-pci.config-wce=bool virtio-blk-pci.serial=str virtio-blk-pci.secs=uint32 virtio-blk-pci.heads=uint32 virtio-blk-pci.cyls=uint32 virtio-blk-pci.discard_granularity=uint32 virtio-blk-pci.bootindex=int32 virtio-blk-pci.opt_io_size=uint32 virtio-blk-pci.min_io_size=uint16 virtio-blk-pci.physical_block_size=uint16 virtio-blk-pci.logical_block_size=uint16 virtio-blk-pci.drive=str virtio-blk-pci.virtio-backend=child<virtio-blk-device> virtio-blk-pci.command_serr_enable=on/off virtio-blk-pci.multifunction=on/off virtio-blk-pci.rombar=uint32 virtio-blk-pci.romfile=str virtio-blk-pci.addr=pci-devfn virtio-blk-pci.event_idx=on/off virtio-blk-pci.indirect_desc=on/off virtio-blk-pci.vectors=uint32 virtio-blk-pci.ioeventfd=on/off virtio-blk-pci.class=uint32 After: virtio-blk-pci.iothread=link<iothread> virtio-blk-pci.x-data-plane=bool (on/off) virtio-blk-pci.scsi=bool (on/off) virtio-blk-pci.config-wce=bool (on/off) virtio-blk-pci.serial=str virtio-blk-pci.secs=uint32 virtio-blk-pci.heads=uint32 virtio-blk-pci.cyls=uint32 virtio-blk-pci.discard_granularity=uint32 virtio-blk-pci.bootindex=int32 virtio-blk-pci.opt_io_size=uint32 virtio-blk-pci.min_io_size=uint16 virtio-blk-pci.physical_block_size=uint16 (A power of two between 512 and 32768) virtio-blk-pci.logical_block_size=uint16 (A power of two between 512 and 32768) virtio-blk-pci.drive=str (ID of a drive to use as a backend) virtio-blk-pci.virtio-backend=child<virtio-blk-device> virtio-blk-pci.command_serr_enable=bool (on/off) virtio-blk-pci.multifunction=bool (on/off) virtio-blk-pci.rombar=uint32 virtio-blk-pci.romfile=str virtio-blk-pci.addr=int32 (Slot and optional function number, example: 06.0 or 06) virtio-blk-pci.event_idx=bool (on/off) virtio-blk-pci.indirect_desc=bool (on/off) virtio-blk-pci.vectors=uint32 virtio-blk-pci.ioeventfd=bool (on/off) virtio-blk-pci.class=uint32 Cc: Markus Armbruster <armbru@redhat.com> Signed-off-by: Gonglei <arei.gonglei@huawei.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Andreas Färber <afaerber@suse.de>
2014-10-07 08:33:23 +02:00
info = make_device_property_info(klass, prop->name, prop->type,
prop->description);
if (!info) {
continue;
}
entry = g_malloc0(sizeof(*entry));
entry->value = info;
entry->next = prop_list;
prop_list = entry;
}
object_unref(obj);
return prop_list;
}
ObjectPropertyInfoList *qmp_qom_list_properties(const char *typename,
Error **errp)
{
ObjectClass *klass;
Object *obj = NULL;
ObjectProperty *prop;
ObjectPropertyIterator iter;
ObjectPropertyInfoList *prop_list = NULL;
klass = object_class_by_name(typename);
if (klass == NULL) {
error_set(errp, ERROR_CLASS_DEVICE_NOT_FOUND,
"Class '%s' not found", typename);
return NULL;
}
klass = object_class_dynamic_cast(klass, TYPE_OBJECT);
if (klass == NULL) {
error_setg(errp, QERR_INVALID_PARAMETER_VALUE, "typename", TYPE_OBJECT);
return NULL;
}
if (object_class_is_abstract(klass)) {
object_class_property_iter_init(&iter, klass);
} else {
obj = object_new(typename);
object_property_iter_init(&iter, obj);
}
while ((prop = object_property_iter_next(&iter))) {
ObjectPropertyInfo *info;
ObjectPropertyInfoList *entry;
info = g_malloc0(sizeof(*info));
info->name = g_strdup(prop->name);
info->type = g_strdup(prop->type);
info->has_description = !!prop->description;
info->description = g_strdup(prop->description);
entry = g_malloc0(sizeof(*entry));
entry->value = info;
entry->next = prop_list;
prop_list = entry;
}
object_unref(obj);
return prop_list;
}
CpuDefinitionInfoList *qmp_query_cpu_definitions(Error **errp)
{
return arch_query_cpu_definitions(errp);
}
CpuModelExpansionInfo *qmp_query_cpu_model_expansion(CpuModelExpansionType type,
CpuModelInfo *model,
Error **errp)
{
return arch_query_cpu_model_expansion(type, model, errp);
}
CpuModelCompareInfo *qmp_query_cpu_model_comparison(CpuModelInfo *modela,
CpuModelInfo *modelb,
Error **errp)
{
return arch_query_cpu_model_comparison(modela, modelb, errp);
}
CpuModelBaselineInfo *qmp_query_cpu_model_baseline(CpuModelInfo *modela,
CpuModelInfo *modelb,
Error **errp)
{
return arch_query_cpu_model_baseline(modela, modelb, errp);
}
void qmp_add_client(const char *protocol, const char *fdname,
bool has_skipauth, bool skipauth, bool has_tls, bool tls,
Error **errp)
{
Chardev *s;
int fd;
fd = monitor_get_fd(cur_mon, fdname, errp);
if (fd < 0) {
return;
}
if (strcmp(protocol, "spice") == 0) {
if (!qemu_using_spice(errp)) {
close(fd);
return;
}
skipauth = has_skipauth ? skipauth : false;
tls = has_tls ? tls : false;
if (qemu_spice_display_add_client(fd, skipauth, tls) < 0) {
error_setg(errp, "spice failed to add client");
close(fd);
}
return;
#ifdef CONFIG_VNC
} else if (strcmp(protocol, "vnc") == 0) {
skipauth = has_skipauth ? skipauth : false;
vnc_display_add_client(NULL, fd, skipauth);
return;
#endif
} else if ((s = qemu_chr_find(protocol)) != NULL) {
if (qemu_chr_add_client(s, fd) < 0) {
error_setg(errp, "failed to add client");
close(fd);
return;
}
return;
}
error_setg(errp, "protocol '%s' is invalid", protocol);
close(fd);
}
void qmp_object_add(const char *type, const char *id,
bool has_props, QObject *props, Error **errp)
{
QDict *pdict;
Visitor *v;
Object *obj;
if (props) {
pdict = qobject_to(QDict, props);
if (!pdict) {
qmp: Wean off qerror_report() The traditional QMP command handler interface int qmp_FOO(Monitor *mon, const QDict *params, QObject **ret_data); doesn't provide for returning an Error object. Instead, the handler is expected to stash it in the monitor with qerror_report(). When we rebased QMP on top of QAPI, we didn't change this interface. Instead, commit 776574d introduced "middle mode" as a temporary aid for converting existing QMP commands to QAPI one by one. More than three years later, we're still using it. Middle mode has two effects: * Instead of the native input marshallers static void qmp_marshal_input_FOO(QDict *, QObject **, Error **) it generates input marshallers conforming to the traditional QMP command handler interface. * It suppresses generation of code to register them with qmp_register_command() This permits giving them internal linkage. As long as we need qmp-commands.hx, we can't use the registry behind qmp_register_command(), so the latter has to stay for now. The former has to go to get rid of qerror_report(). Changing all QMP commands to fit the QAPI mold in one go was impractical back when we started, but by now there are just a few stragglers left: do_qmp_capabilities(), qmp_qom_set(), qmp_qom_get(), qmp_object_add(), qmp_netdev_add(), do_device_add(). Switch middle mode to generate native input marshallers, and adapt the stragglers. Simplifies both the monitor code and the stragglers. Rename do_qmp_capabilities() to qmp_capabilities(), and do_device_add() to qmp_device_add, because that's how QMP command handlers are named today. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
2015-03-13 17:25:50 +01:00
error_setg(errp, QERR_INVALID_PARAMETER_TYPE, "props", "dict");
return;
}
qobject_ref(pdict);
} else {
pdict = qdict_new();
}
v = qobject_input_visitor_new(QOBJECT(pdict));
obj = user_creatable_add_type(type, id, pdict, v, errp);
visit_free(v);
if (obj) {
object_unref(obj);
}
qobject_unref(pdict);
}
void qmp_object_del(const char *id, Error **errp)
{
user_creatable_del(id, errp);
}
MemoryDeviceInfoList *qmp_query_memory_devices(Error **errp)
{
return qmp_memory_device_list();
}
ACPIOSTInfoList *qmp_query_acpi_ospm_status(Error **errp)
{
bool ambig;
ACPIOSTInfoList *head = NULL;
ACPIOSTInfoList **prev = &head;
Object *obj = object_resolve_path_type("", TYPE_ACPI_DEVICE_IF, &ambig);
if (obj) {
AcpiDeviceIfClass *adevc = ACPI_DEVICE_IF_GET_CLASS(obj);
AcpiDeviceIf *adev = ACPI_DEVICE_IF(obj);
adevc->ospm_status(adev, &prev);
} else {
error_setg(errp, "command is not supported, missing ACPI device");
}
return head;
}
MemoryInfo *qmp_query_memory_size_summary(Error **errp)
{
MemoryInfo *mem_info = g_malloc0(sizeof(MemoryInfo));
mem_info->base_memory = ram_size;
mem_info->plugged_memory = get_plugged_memory_size();
mem_info->has_plugged_memory =
mem_info->plugged_memory != (uint64_t)-1;
return mem_info;
}