qemu-e2k/tests/qemu-iotests/common.qemu

402 lines
12 KiB
Plaintext
Raw Normal View History

#!/usr/bin/env bash
block: qemu-iotests - add common.qemu, for bash-controlled qemu tests This creates some common functions for bash language qemu-iotests to control, and communicate with, a running QEMU process. 4 functions are introduced: 1. _launch_qemu() This launches the QEMU process(es), and sets up the file descriptors and fifos for communication. You can choose to launch each QEMU process listening for either QMP or HMP monitor. You can call this function multiple times, and save the handle returned from each. The returned handle is in $QEMU_HANDLE. You must copy this value. Commands 2 and 3 use the handle received from _launch_qemu(), to talk to the appropriate process. 2. _send_qemu_cmd() Sends a command string, specified by $2, to QEMU. If $3 is non-NULL, _send_qemu_cmd() will wait to receive $3 as a required result string from QEMU. Failure to receive $3 will cause the test to fail. The command can optionally be retried $qemu_cmd_repeat number of times. Set $qemu_error_no_exit to not force the test the fail on exit; in this case, $QEMU_STATUS[$1] will be set to -1 on failure. 3. _timed_wait_for() Waits for a response, for up to a default of 10 seconds. If $2 is not seen in that time (anywhere in the response), then the test fails. Primarily used by _send_qemu_cmd, but could be useful standalone, as well. To prevent automatic exit (and therefore test failure), set $qemu_error_no_exit to a non-NULL value. If $silent is a non-NULL value, then output to stdout will be suppressed. 4. _cleanup_qemu() Kills the running QEMU processes, and removes the fifos. Signed-off-by: Jeff Cody <jcody@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-04-30 16:55:08 +02:00
#
# This allows for launching of multiple QEMU instances, with independent
# communication possible to each instance.
#
# Each instance can choose, at launch, to use either the QMP or the
# HMP (monitor) interface.
#
# All instances are cleaned up via _cleanup_qemu, including killing the
# running qemu instance.
#
# Copyright (C) 2014 Red Hat, Inc.
#
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program. If not, see <http://www.gnu.org/licenses/>.
#
QEMU_COMM_TIMEOUT=10
QEMU_FIFO_IN="${QEMU_TEST_DIR}/qmp-in-$$"
QEMU_FIFO_OUT="${QEMU_TEST_DIR}/qmp-out-$$"
block: qemu-iotests - add common.qemu, for bash-controlled qemu tests This creates some common functions for bash language qemu-iotests to control, and communicate with, a running QEMU process. 4 functions are introduced: 1. _launch_qemu() This launches the QEMU process(es), and sets up the file descriptors and fifos for communication. You can choose to launch each QEMU process listening for either QMP or HMP monitor. You can call this function multiple times, and save the handle returned from each. The returned handle is in $QEMU_HANDLE. You must copy this value. Commands 2 and 3 use the handle received from _launch_qemu(), to talk to the appropriate process. 2. _send_qemu_cmd() Sends a command string, specified by $2, to QEMU. If $3 is non-NULL, _send_qemu_cmd() will wait to receive $3 as a required result string from QEMU. Failure to receive $3 will cause the test to fail. The command can optionally be retried $qemu_cmd_repeat number of times. Set $qemu_error_no_exit to not force the test the fail on exit; in this case, $QEMU_STATUS[$1] will be set to -1 on failure. 3. _timed_wait_for() Waits for a response, for up to a default of 10 seconds. If $2 is not seen in that time (anywhere in the response), then the test fails. Primarily used by _send_qemu_cmd, but could be useful standalone, as well. To prevent automatic exit (and therefore test failure), set $qemu_error_no_exit to a non-NULL value. If $silent is a non-NULL value, then output to stdout will be suppressed. 4. _cleanup_qemu() Kills the running QEMU processes, and removes the fifos. Signed-off-by: Jeff Cody <jcody@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-04-30 16:55:08 +02:00
QEMU_HANDLE=0
export _QEMU_HANDLE=0
block: qemu-iotests - add common.qemu, for bash-controlled qemu tests This creates some common functions for bash language qemu-iotests to control, and communicate with, a running QEMU process. 4 functions are introduced: 1. _launch_qemu() This launches the QEMU process(es), and sets up the file descriptors and fifos for communication. You can choose to launch each QEMU process listening for either QMP or HMP monitor. You can call this function multiple times, and save the handle returned from each. The returned handle is in $QEMU_HANDLE. You must copy this value. Commands 2 and 3 use the handle received from _launch_qemu(), to talk to the appropriate process. 2. _send_qemu_cmd() Sends a command string, specified by $2, to QEMU. If $3 is non-NULL, _send_qemu_cmd() will wait to receive $3 as a required result string from QEMU. Failure to receive $3 will cause the test to fail. The command can optionally be retried $qemu_cmd_repeat number of times. Set $qemu_error_no_exit to not force the test the fail on exit; in this case, $QEMU_STATUS[$1] will be set to -1 on failure. 3. _timed_wait_for() Waits for a response, for up to a default of 10 seconds. If $2 is not seen in that time (anywhere in the response), then the test fails. Primarily used by _send_qemu_cmd, but could be useful standalone, as well. To prevent automatic exit (and therefore test failure), set $qemu_error_no_exit to a non-NULL value. If $silent is a non-NULL value, then output to stdout will be suppressed. 4. _cleanup_qemu() Kills the running QEMU processes, and removes the fifos. Signed-off-by: Jeff Cody <jcody@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-04-30 16:55:08 +02:00
# If bash version is >= 4.1, these will be overwritten and dynamic
# file descriptor values assigned.
_out_fd=3
_in_fd=4
# Wait for expected QMP response from QEMU. Will time out
# after 10 seconds, which counts as failure.
#
# Override QEMU_COMM_TIMEOUT for a timeout different than the
# default 10 seconds
#
# $1: The handle to use
# $2+ All remaining arguments comprise the string to search for
# in the response.
#
# If $silent is set to anything but an empty string, then
# response is not echoed out.
# If $mismatch_only is set, only non-matching responses will
# be echoed.
#
# If $capture_events is non-empty, then any QMP event names it lists
# will not be echoed out, but instead collected in the $QEMU_EVENTS
# variable. The _wait_event function can later be used to receive
# the cached events.
#
# If $only_capture_events is set to anything but an empty string,
# then an error will be raised if a QMP message is seen which is
# not an event listed in $capture_events.
#
# If $success_or_failure is set, the meaning of the arguments is
# changed as follows:
# $2: A string to search for in the response; if found, this indicates
# success and ${QEMU_STATUS[$1]} is set to 0.
# $3: A string to search for in the response; if found, this indicates
# failure and the test is either aborted (if $qemu_error_no_exit
# is not set) or ${QEMU_STATUS[$1]} is set to -1 (otherwise).
_timed_wait_for()
block: qemu-iotests - add common.qemu, for bash-controlled qemu tests This creates some common functions for bash language qemu-iotests to control, and communicate with, a running QEMU process. 4 functions are introduced: 1. _launch_qemu() This launches the QEMU process(es), and sets up the file descriptors and fifos for communication. You can choose to launch each QEMU process listening for either QMP or HMP monitor. You can call this function multiple times, and save the handle returned from each. The returned handle is in $QEMU_HANDLE. You must copy this value. Commands 2 and 3 use the handle received from _launch_qemu(), to talk to the appropriate process. 2. _send_qemu_cmd() Sends a command string, specified by $2, to QEMU. If $3 is non-NULL, _send_qemu_cmd() will wait to receive $3 as a required result string from QEMU. Failure to receive $3 will cause the test to fail. The command can optionally be retried $qemu_cmd_repeat number of times. Set $qemu_error_no_exit to not force the test the fail on exit; in this case, $QEMU_STATUS[$1] will be set to -1 on failure. 3. _timed_wait_for() Waits for a response, for up to a default of 10 seconds. If $2 is not seen in that time (anywhere in the response), then the test fails. Primarily used by _send_qemu_cmd, but could be useful standalone, as well. To prevent automatic exit (and therefore test failure), set $qemu_error_no_exit to a non-NULL value. If $silent is a non-NULL value, then output to stdout will be suppressed. 4. _cleanup_qemu() Kills the running QEMU processes, and removes the fifos. Signed-off-by: Jeff Cody <jcody@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-04-30 16:55:08 +02:00
{
local h=${1}
shift
if [ -z "${success_or_failure}" ]; then
success_match=${*}
failure_match=
else
success_match=${1}
failure_match=${2}
fi
timeout=yes
block: qemu-iotests - add common.qemu, for bash-controlled qemu tests This creates some common functions for bash language qemu-iotests to control, and communicate with, a running QEMU process. 4 functions are introduced: 1. _launch_qemu() This launches the QEMU process(es), and sets up the file descriptors and fifos for communication. You can choose to launch each QEMU process listening for either QMP or HMP monitor. You can call this function multiple times, and save the handle returned from each. The returned handle is in $QEMU_HANDLE. You must copy this value. Commands 2 and 3 use the handle received from _launch_qemu(), to talk to the appropriate process. 2. _send_qemu_cmd() Sends a command string, specified by $2, to QEMU. If $3 is non-NULL, _send_qemu_cmd() will wait to receive $3 as a required result string from QEMU. Failure to receive $3 will cause the test to fail. The command can optionally be retried $qemu_cmd_repeat number of times. Set $qemu_error_no_exit to not force the test the fail on exit; in this case, $QEMU_STATUS[$1] will be set to -1 on failure. 3. _timed_wait_for() Waits for a response, for up to a default of 10 seconds. If $2 is not seen in that time (anywhere in the response), then the test fails. Primarily used by _send_qemu_cmd, but could be useful standalone, as well. To prevent automatic exit (and therefore test failure), set $qemu_error_no_exit to a non-NULL value. If $silent is a non-NULL value, then output to stdout will be suppressed. 4. _cleanup_qemu() Kills the running QEMU processes, and removes the fifos. Signed-off-by: Jeff Cody <jcody@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-04-30 16:55:08 +02:00
QEMU_STATUS[$h]=0
while IFS= read -t ${QEMU_COMM_TIMEOUT} resp <&${QEMU_OUT[$h]}
block: qemu-iotests - add common.qemu, for bash-controlled qemu tests This creates some common functions for bash language qemu-iotests to control, and communicate with, a running QEMU process. 4 functions are introduced: 1. _launch_qemu() This launches the QEMU process(es), and sets up the file descriptors and fifos for communication. You can choose to launch each QEMU process listening for either QMP or HMP monitor. You can call this function multiple times, and save the handle returned from each. The returned handle is in $QEMU_HANDLE. You must copy this value. Commands 2 and 3 use the handle received from _launch_qemu(), to talk to the appropriate process. 2. _send_qemu_cmd() Sends a command string, specified by $2, to QEMU. If $3 is non-NULL, _send_qemu_cmd() will wait to receive $3 as a required result string from QEMU. Failure to receive $3 will cause the test to fail. The command can optionally be retried $qemu_cmd_repeat number of times. Set $qemu_error_no_exit to not force the test the fail on exit; in this case, $QEMU_STATUS[$1] will be set to -1 on failure. 3. _timed_wait_for() Waits for a response, for up to a default of 10 seconds. If $2 is not seen in that time (anywhere in the response), then the test fails. Primarily used by _send_qemu_cmd, but could be useful standalone, as well. To prevent automatic exit (and therefore test failure), set $qemu_error_no_exit to a non-NULL value. If $silent is a non-NULL value, then output to stdout will be suppressed. 4. _cleanup_qemu() Kills the running QEMU processes, and removes the fifos. Signed-off-by: Jeff Cody <jcody@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-04-30 16:55:08 +02:00
do
if [ -n "$capture_events" ]; then
capture=0
local evname
for evname in $capture_events
do
case ${resp} in
*\"event\":\ \"${evname}\"* ) capture=1 ;;
esac
done
if [ $capture = 1 ];
then
ev=$(echo "${resp}" | tr -d '\r' | tr % .)
QEMU_EVENTS="${QEMU_EVENTS:+${QEMU_EVENTS}%}${ev}"
if [ -n "$only_capture_events" ]; then
return
else
continue
fi
fi
fi
if [ -n "$only_capture_events" ]; then
echo "Only expected $capture_events but got ${resp}"
exit 1
fi
if [ -z "${silent}" ] && [ -z "${mismatch_only}" ]; then
block: qemu-iotests - add common.qemu, for bash-controlled qemu tests This creates some common functions for bash language qemu-iotests to control, and communicate with, a running QEMU process. 4 functions are introduced: 1. _launch_qemu() This launches the QEMU process(es), and sets up the file descriptors and fifos for communication. You can choose to launch each QEMU process listening for either QMP or HMP monitor. You can call this function multiple times, and save the handle returned from each. The returned handle is in $QEMU_HANDLE. You must copy this value. Commands 2 and 3 use the handle received from _launch_qemu(), to talk to the appropriate process. 2. _send_qemu_cmd() Sends a command string, specified by $2, to QEMU. If $3 is non-NULL, _send_qemu_cmd() will wait to receive $3 as a required result string from QEMU. Failure to receive $3 will cause the test to fail. The command can optionally be retried $qemu_cmd_repeat number of times. Set $qemu_error_no_exit to not force the test the fail on exit; in this case, $QEMU_STATUS[$1] will be set to -1 on failure. 3. _timed_wait_for() Waits for a response, for up to a default of 10 seconds. If $2 is not seen in that time (anywhere in the response), then the test fails. Primarily used by _send_qemu_cmd, but could be useful standalone, as well. To prevent automatic exit (and therefore test failure), set $qemu_error_no_exit to a non-NULL value. If $silent is a non-NULL value, then output to stdout will be suppressed. 4. _cleanup_qemu() Kills the running QEMU processes, and removes the fifos. Signed-off-by: Jeff Cody <jcody@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-04-30 16:55:08 +02:00
echo "${resp}" | _filter_testdir | _filter_qemu \
| _filter_qemu_io | _filter_qmp | _filter_hmp
block: qemu-iotests - add common.qemu, for bash-controlled qemu tests This creates some common functions for bash language qemu-iotests to control, and communicate with, a running QEMU process. 4 functions are introduced: 1. _launch_qemu() This launches the QEMU process(es), and sets up the file descriptors and fifos for communication. You can choose to launch each QEMU process listening for either QMP or HMP monitor. You can call this function multiple times, and save the handle returned from each. The returned handle is in $QEMU_HANDLE. You must copy this value. Commands 2 and 3 use the handle received from _launch_qemu(), to talk to the appropriate process. 2. _send_qemu_cmd() Sends a command string, specified by $2, to QEMU. If $3 is non-NULL, _send_qemu_cmd() will wait to receive $3 as a required result string from QEMU. Failure to receive $3 will cause the test to fail. The command can optionally be retried $qemu_cmd_repeat number of times. Set $qemu_error_no_exit to not force the test the fail on exit; in this case, $QEMU_STATUS[$1] will be set to -1 on failure. 3. _timed_wait_for() Waits for a response, for up to a default of 10 seconds. If $2 is not seen in that time (anywhere in the response), then the test fails. Primarily used by _send_qemu_cmd, but could be useful standalone, as well. To prevent automatic exit (and therefore test failure), set $qemu_error_no_exit to a non-NULL value. If $silent is a non-NULL value, then output to stdout will be suppressed. 4. _cleanup_qemu() Kills the running QEMU processes, and removes the fifos. Signed-off-by: Jeff Cody <jcody@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-04-30 16:55:08 +02:00
fi
if [ -n "${failure_match}" ]; then
grep -q "${failure_match}" < <(echo "${resp}")
if [ $? -eq 0 ]; then
timeout=
break
fi
fi
grep -q "${success_match}" < <(echo "${resp}")
block: qemu-iotests - add common.qemu, for bash-controlled qemu tests This creates some common functions for bash language qemu-iotests to control, and communicate with, a running QEMU process. 4 functions are introduced: 1. _launch_qemu() This launches the QEMU process(es), and sets up the file descriptors and fifos for communication. You can choose to launch each QEMU process listening for either QMP or HMP monitor. You can call this function multiple times, and save the handle returned from each. The returned handle is in $QEMU_HANDLE. You must copy this value. Commands 2 and 3 use the handle received from _launch_qemu(), to talk to the appropriate process. 2. _send_qemu_cmd() Sends a command string, specified by $2, to QEMU. If $3 is non-NULL, _send_qemu_cmd() will wait to receive $3 as a required result string from QEMU. Failure to receive $3 will cause the test to fail. The command can optionally be retried $qemu_cmd_repeat number of times. Set $qemu_error_no_exit to not force the test the fail on exit; in this case, $QEMU_STATUS[$1] will be set to -1 on failure. 3. _timed_wait_for() Waits for a response, for up to a default of 10 seconds. If $2 is not seen in that time (anywhere in the response), then the test fails. Primarily used by _send_qemu_cmd, but could be useful standalone, as well. To prevent automatic exit (and therefore test failure), set $qemu_error_no_exit to a non-NULL value. If $silent is a non-NULL value, then output to stdout will be suppressed. 4. _cleanup_qemu() Kills the running QEMU processes, and removes the fifos. Signed-off-by: Jeff Cody <jcody@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-04-30 16:55:08 +02:00
if [ $? -eq 0 ]; then
return
fi
if [ -z "${silent}" ] && [ -n "${mismatch_only}" ]; then
echo "${resp}" | _filter_testdir | _filter_qemu \
| _filter_qemu_io | _filter_qmp | _filter_hmp
block: qemu-iotests - add common.qemu, for bash-controlled qemu tests This creates some common functions for bash language qemu-iotests to control, and communicate with, a running QEMU process. 4 functions are introduced: 1. _launch_qemu() This launches the QEMU process(es), and sets up the file descriptors and fifos for communication. You can choose to launch each QEMU process listening for either QMP or HMP monitor. You can call this function multiple times, and save the handle returned from each. The returned handle is in $QEMU_HANDLE. You must copy this value. Commands 2 and 3 use the handle received from _launch_qemu(), to talk to the appropriate process. 2. _send_qemu_cmd() Sends a command string, specified by $2, to QEMU. If $3 is non-NULL, _send_qemu_cmd() will wait to receive $3 as a required result string from QEMU. Failure to receive $3 will cause the test to fail. The command can optionally be retried $qemu_cmd_repeat number of times. Set $qemu_error_no_exit to not force the test the fail on exit; in this case, $QEMU_STATUS[$1] will be set to -1 on failure. 3. _timed_wait_for() Waits for a response, for up to a default of 10 seconds. If $2 is not seen in that time (anywhere in the response), then the test fails. Primarily used by _send_qemu_cmd, but could be useful standalone, as well. To prevent automatic exit (and therefore test failure), set $qemu_error_no_exit to a non-NULL value. If $silent is a non-NULL value, then output to stdout will be suppressed. 4. _cleanup_qemu() Kills the running QEMU processes, and removes the fifos. Signed-off-by: Jeff Cody <jcody@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-04-30 16:55:08 +02:00
fi
block: qemu-iotests - add common.qemu, for bash-controlled qemu tests This creates some common functions for bash language qemu-iotests to control, and communicate with, a running QEMU process. 4 functions are introduced: 1. _launch_qemu() This launches the QEMU process(es), and sets up the file descriptors and fifos for communication. You can choose to launch each QEMU process listening for either QMP or HMP monitor. You can call this function multiple times, and save the handle returned from each. The returned handle is in $QEMU_HANDLE. You must copy this value. Commands 2 and 3 use the handle received from _launch_qemu(), to talk to the appropriate process. 2. _send_qemu_cmd() Sends a command string, specified by $2, to QEMU. If $3 is non-NULL, _send_qemu_cmd() will wait to receive $3 as a required result string from QEMU. Failure to receive $3 will cause the test to fail. The command can optionally be retried $qemu_cmd_repeat number of times. Set $qemu_error_no_exit to not force the test the fail on exit; in this case, $QEMU_STATUS[$1] will be set to -1 on failure. 3. _timed_wait_for() Waits for a response, for up to a default of 10 seconds. If $2 is not seen in that time (anywhere in the response), then the test fails. Primarily used by _send_qemu_cmd, but could be useful standalone, as well. To prevent automatic exit (and therefore test failure), set $qemu_error_no_exit to a non-NULL value. If $silent is a non-NULL value, then output to stdout will be suppressed. 4. _cleanup_qemu() Kills the running QEMU processes, and removes the fifos. Signed-off-by: Jeff Cody <jcody@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-04-30 16:55:08 +02:00
done
QEMU_STATUS[$h]=-1
if [ -z "${qemu_error_no_exit}" ]; then
if [ -n "${timeout}" ]; then
echo "Timeout waiting for ${success_match} on handle ${h}"
else
echo "Wrong response matching ${failure_match} on handle ${h}"
fi
exit 1 # Timeout or wrong match mean the test failed
block: qemu-iotests - add common.qemu, for bash-controlled qemu tests This creates some common functions for bash language qemu-iotests to control, and communicate with, a running QEMU process. 4 functions are introduced: 1. _launch_qemu() This launches the QEMU process(es), and sets up the file descriptors and fifos for communication. You can choose to launch each QEMU process listening for either QMP or HMP monitor. You can call this function multiple times, and save the handle returned from each. The returned handle is in $QEMU_HANDLE. You must copy this value. Commands 2 and 3 use the handle received from _launch_qemu(), to talk to the appropriate process. 2. _send_qemu_cmd() Sends a command string, specified by $2, to QEMU. If $3 is non-NULL, _send_qemu_cmd() will wait to receive $3 as a required result string from QEMU. Failure to receive $3 will cause the test to fail. The command can optionally be retried $qemu_cmd_repeat number of times. Set $qemu_error_no_exit to not force the test the fail on exit; in this case, $QEMU_STATUS[$1] will be set to -1 on failure. 3. _timed_wait_for() Waits for a response, for up to a default of 10 seconds. If $2 is not seen in that time (anywhere in the response), then the test fails. Primarily used by _send_qemu_cmd, but could be useful standalone, as well. To prevent automatic exit (and therefore test failure), set $qemu_error_no_exit to a non-NULL value. If $silent is a non-NULL value, then output to stdout will be suppressed. 4. _cleanup_qemu() Kills the running QEMU processes, and removes the fifos. Signed-off-by: Jeff Cody <jcody@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-04-30 16:55:08 +02:00
fi
}
# Sends QMP or HMP command to QEMU, and waits for the expected response
#
# $1: QEMU handle to use
# $2: String of the QMP command to send
# ${@: -1} (Last string passed)
# String that the QEMU response should contain. If it is a null
# string, do not wait for a response
#
# Set qemu_cmd_repeat to the number of times to repeat the cmd
# until either timeout, or a response. If it is not set, or <=0,
# then the command is only sent once.
#
# If neither $silent nor $mismatch_only is set, and $cmd begins with '{',
# echo the command before sending it the first time.
#
block: qemu-iotests - add common.qemu, for bash-controlled qemu tests This creates some common functions for bash language qemu-iotests to control, and communicate with, a running QEMU process. 4 functions are introduced: 1. _launch_qemu() This launches the QEMU process(es), and sets up the file descriptors and fifos for communication. You can choose to launch each QEMU process listening for either QMP or HMP monitor. You can call this function multiple times, and save the handle returned from each. The returned handle is in $QEMU_HANDLE. You must copy this value. Commands 2 and 3 use the handle received from _launch_qemu(), to talk to the appropriate process. 2. _send_qemu_cmd() Sends a command string, specified by $2, to QEMU. If $3 is non-NULL, _send_qemu_cmd() will wait to receive $3 as a required result string from QEMU. Failure to receive $3 will cause the test to fail. The command can optionally be retried $qemu_cmd_repeat number of times. Set $qemu_error_no_exit to not force the test the fail on exit; in this case, $QEMU_STATUS[$1] will be set to -1 on failure. 3. _timed_wait_for() Waits for a response, for up to a default of 10 seconds. If $2 is not seen in that time (anywhere in the response), then the test fails. Primarily used by _send_qemu_cmd, but could be useful standalone, as well. To prevent automatic exit (and therefore test failure), set $qemu_error_no_exit to a non-NULL value. If $silent is a non-NULL value, then output to stdout will be suppressed. 4. _cleanup_qemu() Kills the running QEMU processes, and removes the fifos. Signed-off-by: Jeff Cody <jcody@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-04-30 16:55:08 +02:00
# If $qemu_error_no_exit is set, then even if the expected response
# is not seen, we will not exit. $QEMU_STATUS[$1] will be set it -1 in
# that case.
#
# If $success_or_failure is set, then the last two strings are the
# strings the response will be scanned for. The first of the two
# indicates success, the latter indicates failure. Failure is handled
# like a timeout.
_send_qemu_cmd()
block: qemu-iotests - add common.qemu, for bash-controlled qemu tests This creates some common functions for bash language qemu-iotests to control, and communicate with, a running QEMU process. 4 functions are introduced: 1. _launch_qemu() This launches the QEMU process(es), and sets up the file descriptors and fifos for communication. You can choose to launch each QEMU process listening for either QMP or HMP monitor. You can call this function multiple times, and save the handle returned from each. The returned handle is in $QEMU_HANDLE. You must copy this value. Commands 2 and 3 use the handle received from _launch_qemu(), to talk to the appropriate process. 2. _send_qemu_cmd() Sends a command string, specified by $2, to QEMU. If $3 is non-NULL, _send_qemu_cmd() will wait to receive $3 as a required result string from QEMU. Failure to receive $3 will cause the test to fail. The command can optionally be retried $qemu_cmd_repeat number of times. Set $qemu_error_no_exit to not force the test the fail on exit; in this case, $QEMU_STATUS[$1] will be set to -1 on failure. 3. _timed_wait_for() Waits for a response, for up to a default of 10 seconds. If $2 is not seen in that time (anywhere in the response), then the test fails. Primarily used by _send_qemu_cmd, but could be useful standalone, as well. To prevent automatic exit (and therefore test failure), set $qemu_error_no_exit to a non-NULL value. If $silent is a non-NULL value, then output to stdout will be suppressed. 4. _cleanup_qemu() Kills the running QEMU processes, and removes the fifos. Signed-off-by: Jeff Cody <jcody@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-04-30 16:55:08 +02:00
{
local h=${1}
local count=1
local cmd=
local use_error=${qemu_error_no_exit}
shift
if [ ${qemu_cmd_repeat} -gt 0 ] 2>/dev/null; then
count=${qemu_cmd_repeat}
use_error="no"
fi
cmd=$1
shift
block: qemu-iotests - add common.qemu, for bash-controlled qemu tests This creates some common functions for bash language qemu-iotests to control, and communicate with, a running QEMU process. 4 functions are introduced: 1. _launch_qemu() This launches the QEMU process(es), and sets up the file descriptors and fifos for communication. You can choose to launch each QEMU process listening for either QMP or HMP monitor. You can call this function multiple times, and save the handle returned from each. The returned handle is in $QEMU_HANDLE. You must copy this value. Commands 2 and 3 use the handle received from _launch_qemu(), to talk to the appropriate process. 2. _send_qemu_cmd() Sends a command string, specified by $2, to QEMU. If $3 is non-NULL, _send_qemu_cmd() will wait to receive $3 as a required result string from QEMU. Failure to receive $3 will cause the test to fail. The command can optionally be retried $qemu_cmd_repeat number of times. Set $qemu_error_no_exit to not force the test the fail on exit; in this case, $QEMU_STATUS[$1] will be set to -1 on failure. 3. _timed_wait_for() Waits for a response, for up to a default of 10 seconds. If $2 is not seen in that time (anywhere in the response), then the test fails. Primarily used by _send_qemu_cmd, but could be useful standalone, as well. To prevent automatic exit (and therefore test failure), set $qemu_error_no_exit to a non-NULL value. If $silent is a non-NULL value, then output to stdout will be suppressed. 4. _cleanup_qemu() Kills the running QEMU processes, and removes the fifos. Signed-off-by: Jeff Cody <jcody@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-04-30 16:55:08 +02:00
# Display QMP being sent, but not HMP (since HMP already echoes its
# input back to output); decide based on leading '{'
if [ -z "$silent" ] && [ -z "$mismatch_only" ] &&
[ "$cmd" != "${cmd#\{}" ]; then
echo "${cmd}" | _filter_testdir | _filter_imgfmt
fi
block: qemu-iotests - add common.qemu, for bash-controlled qemu tests This creates some common functions for bash language qemu-iotests to control, and communicate with, a running QEMU process. 4 functions are introduced: 1. _launch_qemu() This launches the QEMU process(es), and sets up the file descriptors and fifos for communication. You can choose to launch each QEMU process listening for either QMP or HMP monitor. You can call this function multiple times, and save the handle returned from each. The returned handle is in $QEMU_HANDLE. You must copy this value. Commands 2 and 3 use the handle received from _launch_qemu(), to talk to the appropriate process. 2. _send_qemu_cmd() Sends a command string, specified by $2, to QEMU. If $3 is non-NULL, _send_qemu_cmd() will wait to receive $3 as a required result string from QEMU. Failure to receive $3 will cause the test to fail. The command can optionally be retried $qemu_cmd_repeat number of times. Set $qemu_error_no_exit to not force the test the fail on exit; in this case, $QEMU_STATUS[$1] will be set to -1 on failure. 3. _timed_wait_for() Waits for a response, for up to a default of 10 seconds. If $2 is not seen in that time (anywhere in the response), then the test fails. Primarily used by _send_qemu_cmd, but could be useful standalone, as well. To prevent automatic exit (and therefore test failure), set $qemu_error_no_exit to a non-NULL value. If $silent is a non-NULL value, then output to stdout will be suppressed. 4. _cleanup_qemu() Kills the running QEMU processes, and removes the fifos. Signed-off-by: Jeff Cody <jcody@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-04-30 16:55:08 +02:00
while [ ${count} -gt 0 ]
do
echo "${cmd}" >&${QEMU_IN[${h}]}
if [ -n "${1}" ]; then
if [ -z "${success_or_failure}" ]; then
qemu_error_no_exit=${use_error} _timed_wait_for ${h} "${1}"
else
qemu_error_no_exit=${use_error} _timed_wait_for ${h} "${1}" "${2}"
fi
block: qemu-iotests - add common.qemu, for bash-controlled qemu tests This creates some common functions for bash language qemu-iotests to control, and communicate with, a running QEMU process. 4 functions are introduced: 1. _launch_qemu() This launches the QEMU process(es), and sets up the file descriptors and fifos for communication. You can choose to launch each QEMU process listening for either QMP or HMP monitor. You can call this function multiple times, and save the handle returned from each. The returned handle is in $QEMU_HANDLE. You must copy this value. Commands 2 and 3 use the handle received from _launch_qemu(), to talk to the appropriate process. 2. _send_qemu_cmd() Sends a command string, specified by $2, to QEMU. If $3 is non-NULL, _send_qemu_cmd() will wait to receive $3 as a required result string from QEMU. Failure to receive $3 will cause the test to fail. The command can optionally be retried $qemu_cmd_repeat number of times. Set $qemu_error_no_exit to not force the test the fail on exit; in this case, $QEMU_STATUS[$1] will be set to -1 on failure. 3. _timed_wait_for() Waits for a response, for up to a default of 10 seconds. If $2 is not seen in that time (anywhere in the response), then the test fails. Primarily used by _send_qemu_cmd, but could be useful standalone, as well. To prevent automatic exit (and therefore test failure), set $qemu_error_no_exit to a non-NULL value. If $silent is a non-NULL value, then output to stdout will be suppressed. 4. _cleanup_qemu() Kills the running QEMU processes, and removes the fifos. Signed-off-by: Jeff Cody <jcody@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-04-30 16:55:08 +02:00
if [ ${QEMU_STATUS[$h]} -eq 0 ]; then
return
fi
fi
let count--;
done
if [ ${QEMU_STATUS[$h]} -ne 0 ] && [ -z "${qemu_error_no_exit}" ]; then
echo "Timeout waiting for command ${1} response on handle ${h}"
block: qemu-iotests - add common.qemu, for bash-controlled qemu tests This creates some common functions for bash language qemu-iotests to control, and communicate with, a running QEMU process. 4 functions are introduced: 1. _launch_qemu() This launches the QEMU process(es), and sets up the file descriptors and fifos for communication. You can choose to launch each QEMU process listening for either QMP or HMP monitor. You can call this function multiple times, and save the handle returned from each. The returned handle is in $QEMU_HANDLE. You must copy this value. Commands 2 and 3 use the handle received from _launch_qemu(), to talk to the appropriate process. 2. _send_qemu_cmd() Sends a command string, specified by $2, to QEMU. If $3 is non-NULL, _send_qemu_cmd() will wait to receive $3 as a required result string from QEMU. Failure to receive $3 will cause the test to fail. The command can optionally be retried $qemu_cmd_repeat number of times. Set $qemu_error_no_exit to not force the test the fail on exit; in this case, $QEMU_STATUS[$1] will be set to -1 on failure. 3. _timed_wait_for() Waits for a response, for up to a default of 10 seconds. If $2 is not seen in that time (anywhere in the response), then the test fails. Primarily used by _send_qemu_cmd, but could be useful standalone, as well. To prevent automatic exit (and therefore test failure), set $qemu_error_no_exit to a non-NULL value. If $silent is a non-NULL value, then output to stdout will be suppressed. 4. _cleanup_qemu() Kills the running QEMU processes, and removes the fifos. Signed-off-by: Jeff Cody <jcody@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-04-30 16:55:08 +02:00
exit 1 #Timeout means the test failed
fi
}
# Check event cache for a named QMP event
#
# Input parameters:
# $1: Name of the QMP event to check for
#
# Checks if the named QMP event that was previously captured
# into $QEMU_EVENTS. When matched, the QMP event will be echoed
# and the $matched variable set to 1.
#
# _wait_event is more suitable for test usage in most cases
_check_cached_events()
{
local evname=${1}
local match="\"event\": \"$evname\""
matched=0
if [ -n "$QEMU_EVENTS" ]; then
CURRENT_QEMU_EVENTS=$QEMU_EVENTS
QEMU_EVENTS=
old_IFS=$IFS
IFS="%"
for ev in $CURRENT_QEMU_EVENTS
do
grep -q "$match" < <(echo "${ev}")
if [ $? -eq 0 ] && [ $matched = 0 ]; then
echo "${ev}" | _filter_testdir | _filter_qemu \
| _filter_qemu_io | _filter_qmp | _filter_hmp
matched=1
else
QEMU_EVENTS="${QEMU_EVENTS:+${QEMU_EVENTS}%}${ev}"
fi
done
IFS=$old_IFS
fi
}
# Wait for a named QMP event
#
# Input parameters:
# $1: QEMU handle to use
# $2: Name of the QMP event to wait for
#
# Checks if the named QMP even was previously captured
# into $QEMU_EVENTS. If none are present, then waits for the
# event to arrive on the QMP channel. When matched, the QMP
# event will be echoed
_wait_event()
{
local h=${1}
local evname=${2}
while true
do
_check_cached_events $evname
if [ $matched = 1 ];
then
return
fi
only_capture_events=1 qemu_error_no_exit=1 _timed_wait_for ${h}
if [ ${QEMU_STATUS[$h]} -ne 0 ] ; then
echo "Timeout waiting for event ${evname} on handle ${h}"
exit 1 #Timeout means the test failed
fi
done
}
block: qemu-iotests - add common.qemu, for bash-controlled qemu tests This creates some common functions for bash language qemu-iotests to control, and communicate with, a running QEMU process. 4 functions are introduced: 1. _launch_qemu() This launches the QEMU process(es), and sets up the file descriptors and fifos for communication. You can choose to launch each QEMU process listening for either QMP or HMP monitor. You can call this function multiple times, and save the handle returned from each. The returned handle is in $QEMU_HANDLE. You must copy this value. Commands 2 and 3 use the handle received from _launch_qemu(), to talk to the appropriate process. 2. _send_qemu_cmd() Sends a command string, specified by $2, to QEMU. If $3 is non-NULL, _send_qemu_cmd() will wait to receive $3 as a required result string from QEMU. Failure to receive $3 will cause the test to fail. The command can optionally be retried $qemu_cmd_repeat number of times. Set $qemu_error_no_exit to not force the test the fail on exit; in this case, $QEMU_STATUS[$1] will be set to -1 on failure. 3. _timed_wait_for() Waits for a response, for up to a default of 10 seconds. If $2 is not seen in that time (anywhere in the response), then the test fails. Primarily used by _send_qemu_cmd, but could be useful standalone, as well. To prevent automatic exit (and therefore test failure), set $qemu_error_no_exit to a non-NULL value. If $silent is a non-NULL value, then output to stdout will be suppressed. 4. _cleanup_qemu() Kills the running QEMU processes, and removes the fifos. Signed-off-by: Jeff Cody <jcody@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-04-30 16:55:08 +02:00
# Launch a QEMU process.
#
# Input parameters:
# $qemu_comm_method: set this variable to 'monitor' (case insensitive)
# to use the QEMU HMP monitor for communication.
# Otherwise, the default of QMP is used.
# $qmp_pretty: Set this variable to 'y' to enable QMP pretty printing.
# $keep_stderr: Set this variable to 'y' to keep QEMU's stderr output on stderr.
# If this variable is empty, stderr will be redirected to stdout.
block: qemu-iotests - add common.qemu, for bash-controlled qemu tests This creates some common functions for bash language qemu-iotests to control, and communicate with, a running QEMU process. 4 functions are introduced: 1. _launch_qemu() This launches the QEMU process(es), and sets up the file descriptors and fifos for communication. You can choose to launch each QEMU process listening for either QMP or HMP monitor. You can call this function multiple times, and save the handle returned from each. The returned handle is in $QEMU_HANDLE. You must copy this value. Commands 2 and 3 use the handle received from _launch_qemu(), to talk to the appropriate process. 2. _send_qemu_cmd() Sends a command string, specified by $2, to QEMU. If $3 is non-NULL, _send_qemu_cmd() will wait to receive $3 as a required result string from QEMU. Failure to receive $3 will cause the test to fail. The command can optionally be retried $qemu_cmd_repeat number of times. Set $qemu_error_no_exit to not force the test the fail on exit; in this case, $QEMU_STATUS[$1] will be set to -1 on failure. 3. _timed_wait_for() Waits for a response, for up to a default of 10 seconds. If $2 is not seen in that time (anywhere in the response), then the test fails. Primarily used by _send_qemu_cmd, but could be useful standalone, as well. To prevent automatic exit (and therefore test failure), set $qemu_error_no_exit to a non-NULL value. If $silent is a non-NULL value, then output to stdout will be suppressed. 4. _cleanup_qemu() Kills the running QEMU processes, and removes the fifos. Signed-off-by: Jeff Cody <jcody@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-04-30 16:55:08 +02:00
# Returns:
# $QEMU_HANDLE: set to a handle value to communicate with this QEMU instance.
#
_launch_qemu()
block: qemu-iotests - add common.qemu, for bash-controlled qemu tests This creates some common functions for bash language qemu-iotests to control, and communicate with, a running QEMU process. 4 functions are introduced: 1. _launch_qemu() This launches the QEMU process(es), and sets up the file descriptors and fifos for communication. You can choose to launch each QEMU process listening for either QMP or HMP monitor. You can call this function multiple times, and save the handle returned from each. The returned handle is in $QEMU_HANDLE. You must copy this value. Commands 2 and 3 use the handle received from _launch_qemu(), to talk to the appropriate process. 2. _send_qemu_cmd() Sends a command string, specified by $2, to QEMU. If $3 is non-NULL, _send_qemu_cmd() will wait to receive $3 as a required result string from QEMU. Failure to receive $3 will cause the test to fail. The command can optionally be retried $qemu_cmd_repeat number of times. Set $qemu_error_no_exit to not force the test the fail on exit; in this case, $QEMU_STATUS[$1] will be set to -1 on failure. 3. _timed_wait_for() Waits for a response, for up to a default of 10 seconds. If $2 is not seen in that time (anywhere in the response), then the test fails. Primarily used by _send_qemu_cmd, but could be useful standalone, as well. To prevent automatic exit (and therefore test failure), set $qemu_error_no_exit to a non-NULL value. If $silent is a non-NULL value, then output to stdout will be suppressed. 4. _cleanup_qemu() Kills the running QEMU processes, and removes the fifos. Signed-off-by: Jeff Cody <jcody@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-04-30 16:55:08 +02:00
{
local comm=
local fifo_out=
local fifo_in=
if (shopt -s nocasematch; [[ "${qemu_comm_method}" == "monitor" ]])
then
comm="-monitor stdio"
else
local qemu_comm_method="qmp"
if [ "$qmp_pretty" = "y" ]; then
comm="-monitor none -qmp-pretty stdio"
else
comm="-monitor none -qmp stdio"
fi
block: qemu-iotests - add common.qemu, for bash-controlled qemu tests This creates some common functions for bash language qemu-iotests to control, and communicate with, a running QEMU process. 4 functions are introduced: 1. _launch_qemu() This launches the QEMU process(es), and sets up the file descriptors and fifos for communication. You can choose to launch each QEMU process listening for either QMP or HMP monitor. You can call this function multiple times, and save the handle returned from each. The returned handle is in $QEMU_HANDLE. You must copy this value. Commands 2 and 3 use the handle received from _launch_qemu(), to talk to the appropriate process. 2. _send_qemu_cmd() Sends a command string, specified by $2, to QEMU. If $3 is non-NULL, _send_qemu_cmd() will wait to receive $3 as a required result string from QEMU. Failure to receive $3 will cause the test to fail. The command can optionally be retried $qemu_cmd_repeat number of times. Set $qemu_error_no_exit to not force the test the fail on exit; in this case, $QEMU_STATUS[$1] will be set to -1 on failure. 3. _timed_wait_for() Waits for a response, for up to a default of 10 seconds. If $2 is not seen in that time (anywhere in the response), then the test fails. Primarily used by _send_qemu_cmd, but could be useful standalone, as well. To prevent automatic exit (and therefore test failure), set $qemu_error_no_exit to a non-NULL value. If $silent is a non-NULL value, then output to stdout will be suppressed. 4. _cleanup_qemu() Kills the running QEMU processes, and removes the fifos. Signed-off-by: Jeff Cody <jcody@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-04-30 16:55:08 +02:00
fi
fifo_out=${QEMU_FIFO_OUT}_${_QEMU_HANDLE}
fifo_in=${QEMU_FIFO_IN}_${_QEMU_HANDLE}
mkfifo "${fifo_out}"
mkfifo "${fifo_in}"
object_options=
if [ -n "$IMGKEYSECRET" ]; then
object_options="--object secret,id=keysec0,data=$IMGKEYSECRET"
fi
if [ -z "$keep_stderr" ]; then
QEMU_NEED_PID='y'\
${QEMU} ${object_options} -nographic -serial none ${comm} "${@}" >"${fifo_out}" \
2>&1 \
<"${fifo_in}" &
elif [ "$keep_stderr" = "y" ]; then
QEMU_NEED_PID='y'\
${QEMU} ${object_options} -nographic -serial none ${comm} "${@}" >"${fifo_out}" \
<"${fifo_in}" &
else
exit 1
fi
block: qemu-iotests - add common.qemu, for bash-controlled qemu tests This creates some common functions for bash language qemu-iotests to control, and communicate with, a running QEMU process. 4 functions are introduced: 1. _launch_qemu() This launches the QEMU process(es), and sets up the file descriptors and fifos for communication. You can choose to launch each QEMU process listening for either QMP or HMP monitor. You can call this function multiple times, and save the handle returned from each. The returned handle is in $QEMU_HANDLE. You must copy this value. Commands 2 and 3 use the handle received from _launch_qemu(), to talk to the appropriate process. 2. _send_qemu_cmd() Sends a command string, specified by $2, to QEMU. If $3 is non-NULL, _send_qemu_cmd() will wait to receive $3 as a required result string from QEMU. Failure to receive $3 will cause the test to fail. The command can optionally be retried $qemu_cmd_repeat number of times. Set $qemu_error_no_exit to not force the test the fail on exit; in this case, $QEMU_STATUS[$1] will be set to -1 on failure. 3. _timed_wait_for() Waits for a response, for up to a default of 10 seconds. If $2 is not seen in that time (anywhere in the response), then the test fails. Primarily used by _send_qemu_cmd, but could be useful standalone, as well. To prevent automatic exit (and therefore test failure), set $qemu_error_no_exit to a non-NULL value. If $silent is a non-NULL value, then output to stdout will be suppressed. 4. _cleanup_qemu() Kills the running QEMU processes, and removes the fifos. Signed-off-by: Jeff Cody <jcody@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-04-30 16:55:08 +02:00
if [[ "${BASH_VERSINFO[0]}" -ge "5" ||
("${BASH_VERSINFO[0]}" -ge "4" && "${BASH_VERSINFO[1]}" -ge "1") ]]
then
# bash >= 4.1 required for automatic fd
exec {_out_fd}<"${fifo_out}"
exec {_in_fd}>"${fifo_in}"
else
let _out_fd++
let _in_fd++
eval "exec ${_out_fd}<'${fifo_out}'"
eval "exec ${_in_fd}>'${fifo_in}'"
fi
QEMU_OUT[${_QEMU_HANDLE}]=${_out_fd}
QEMU_IN[${_QEMU_HANDLE}]=${_in_fd}
QEMU_STATUS[${_QEMU_HANDLE}]=0
if [ "${qemu_comm_method}" == "qmp" ]
then
# Don't print response, since it has version information in it
silent=yes _timed_wait_for ${_QEMU_HANDLE} "capabilities"
if [ "$qmp_pretty" = "y" ]; then
silent=yes _timed_wait_for ${_QEMU_HANDLE} "^}"
fi
block: qemu-iotests - add common.qemu, for bash-controlled qemu tests This creates some common functions for bash language qemu-iotests to control, and communicate with, a running QEMU process. 4 functions are introduced: 1. _launch_qemu() This launches the QEMU process(es), and sets up the file descriptors and fifos for communication. You can choose to launch each QEMU process listening for either QMP or HMP monitor. You can call this function multiple times, and save the handle returned from each. The returned handle is in $QEMU_HANDLE. You must copy this value. Commands 2 and 3 use the handle received from _launch_qemu(), to talk to the appropriate process. 2. _send_qemu_cmd() Sends a command string, specified by $2, to QEMU. If $3 is non-NULL, _send_qemu_cmd() will wait to receive $3 as a required result string from QEMU. Failure to receive $3 will cause the test to fail. The command can optionally be retried $qemu_cmd_repeat number of times. Set $qemu_error_no_exit to not force the test the fail on exit; in this case, $QEMU_STATUS[$1] will be set to -1 on failure. 3. _timed_wait_for() Waits for a response, for up to a default of 10 seconds. If $2 is not seen in that time (anywhere in the response), then the test fails. Primarily used by _send_qemu_cmd, but could be useful standalone, as well. To prevent automatic exit (and therefore test failure), set $qemu_error_no_exit to a non-NULL value. If $silent is a non-NULL value, then output to stdout will be suppressed. 4. _cleanup_qemu() Kills the running QEMU processes, and removes the fifos. Signed-off-by: Jeff Cody <jcody@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-04-30 16:55:08 +02:00
fi
QEMU_HANDLE=${_QEMU_HANDLE}
let _QEMU_HANDLE++
}
# Silently kills the QEMU process
#
# If $wait is set to anything other than the empty string, the process will not
# be killed but only waited for, and any output will be forwarded to stdout. If
# $wait is empty, the process will be killed and all output will be suppressed.
_cleanup_qemu()
block: qemu-iotests - add common.qemu, for bash-controlled qemu tests This creates some common functions for bash language qemu-iotests to control, and communicate with, a running QEMU process. 4 functions are introduced: 1. _launch_qemu() This launches the QEMU process(es), and sets up the file descriptors and fifos for communication. You can choose to launch each QEMU process listening for either QMP or HMP monitor. You can call this function multiple times, and save the handle returned from each. The returned handle is in $QEMU_HANDLE. You must copy this value. Commands 2 and 3 use the handle received from _launch_qemu(), to talk to the appropriate process. 2. _send_qemu_cmd() Sends a command string, specified by $2, to QEMU. If $3 is non-NULL, _send_qemu_cmd() will wait to receive $3 as a required result string from QEMU. Failure to receive $3 will cause the test to fail. The command can optionally be retried $qemu_cmd_repeat number of times. Set $qemu_error_no_exit to not force the test the fail on exit; in this case, $QEMU_STATUS[$1] will be set to -1 on failure. 3. _timed_wait_for() Waits for a response, for up to a default of 10 seconds. If $2 is not seen in that time (anywhere in the response), then the test fails. Primarily used by _send_qemu_cmd, but could be useful standalone, as well. To prevent automatic exit (and therefore test failure), set $qemu_error_no_exit to a non-NULL value. If $silent is a non-NULL value, then output to stdout will be suppressed. 4. _cleanup_qemu() Kills the running QEMU processes, and removes the fifos. Signed-off-by: Jeff Cody <jcody@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-04-30 16:55:08 +02:00
{
# QEMU_PID[], QEMU_IN[], QEMU_OUT[] all use same indices
for i in "${!QEMU_OUT[@]}"
do
local QEMU_PID
if [ -f "${QEMU_TEST_DIR}/qemu-${i}.pid" ]; then
read QEMU_PID < "${QEMU_TEST_DIR}/qemu-${i}.pid"
rm -f "${QEMU_TEST_DIR}/qemu-${i}.pid"
if [ -z "${wait}" ] && [ -n "${QEMU_PID}" ]; then
kill -KILL ${QEMU_PID} 2>/dev/null
fi
if [ -n "${QEMU_PID}" ]; then
wait ${QEMU_PID} 2>/dev/null # silent kill
fi
fi
if [ -n "${wait}" ]; then
cat <&${QEMU_OUT[$i]} | _filter_testdir | _filter_qemu \
| _filter_qemu_io | _filter_qmp | _filter_hmp
fi
block: qemu-iotests - add common.qemu, for bash-controlled qemu tests This creates some common functions for bash language qemu-iotests to control, and communicate with, a running QEMU process. 4 functions are introduced: 1. _launch_qemu() This launches the QEMU process(es), and sets up the file descriptors and fifos for communication. You can choose to launch each QEMU process listening for either QMP or HMP monitor. You can call this function multiple times, and save the handle returned from each. The returned handle is in $QEMU_HANDLE. You must copy this value. Commands 2 and 3 use the handle received from _launch_qemu(), to talk to the appropriate process. 2. _send_qemu_cmd() Sends a command string, specified by $2, to QEMU. If $3 is non-NULL, _send_qemu_cmd() will wait to receive $3 as a required result string from QEMU. Failure to receive $3 will cause the test to fail. The command can optionally be retried $qemu_cmd_repeat number of times. Set $qemu_error_no_exit to not force the test the fail on exit; in this case, $QEMU_STATUS[$1] will be set to -1 on failure. 3. _timed_wait_for() Waits for a response, for up to a default of 10 seconds. If $2 is not seen in that time (anywhere in the response), then the test fails. Primarily used by _send_qemu_cmd, but could be useful standalone, as well. To prevent automatic exit (and therefore test failure), set $qemu_error_no_exit to a non-NULL value. If $silent is a non-NULL value, then output to stdout will be suppressed. 4. _cleanup_qemu() Kills the running QEMU processes, and removes the fifos. Signed-off-by: Jeff Cody <jcody@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-04-30 16:55:08 +02:00
rm -f "${QEMU_FIFO_IN}_${i}" "${QEMU_FIFO_OUT}_${i}"
eval "exec ${QEMU_IN[$i]}<&-" # close file descriptors
eval "exec ${QEMU_OUT[$i]}<&-"
unset QEMU_IN[$i]
unset QEMU_OUT[$i]
block: qemu-iotests - add common.qemu, for bash-controlled qemu tests This creates some common functions for bash language qemu-iotests to control, and communicate with, a running QEMU process. 4 functions are introduced: 1. _launch_qemu() This launches the QEMU process(es), and sets up the file descriptors and fifos for communication. You can choose to launch each QEMU process listening for either QMP or HMP monitor. You can call this function multiple times, and save the handle returned from each. The returned handle is in $QEMU_HANDLE. You must copy this value. Commands 2 and 3 use the handle received from _launch_qemu(), to talk to the appropriate process. 2. _send_qemu_cmd() Sends a command string, specified by $2, to QEMU. If $3 is non-NULL, _send_qemu_cmd() will wait to receive $3 as a required result string from QEMU. Failure to receive $3 will cause the test to fail. The command can optionally be retried $qemu_cmd_repeat number of times. Set $qemu_error_no_exit to not force the test the fail on exit; in this case, $QEMU_STATUS[$1] will be set to -1 on failure. 3. _timed_wait_for() Waits for a response, for up to a default of 10 seconds. If $2 is not seen in that time (anywhere in the response), then the test fails. Primarily used by _send_qemu_cmd, but could be useful standalone, as well. To prevent automatic exit (and therefore test failure), set $qemu_error_no_exit to a non-NULL value. If $silent is a non-NULL value, then output to stdout will be suppressed. 4. _cleanup_qemu() Kills the running QEMU processes, and removes the fifos. Signed-off-by: Jeff Cody <jcody@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-04-30 16:55:08 +02:00
done
}