qemu-e2k/hw/core/machine.c

1479 lines
47 KiB
C
Raw Normal View History

/*
* QEMU Machine
*
* Copyright (C) 2014 Red Hat Inc
*
* Authors:
* Marcel Apfelbaum <marcel.a@redhat.com>
*
* This work is licensed under the terms of the GNU GPL, version 2 or later.
* See the COPYING file in the top-level directory.
*/
#include "qemu/osdep.h"
#include "qemu/option.h"
#include "qapi/qmp/qerror.h"
#include "sysemu/replay.h"
#include "qemu/units.h"
#include "hw/boards.h"
#include "hw/loader.h"
2016-03-14 09:01:28 +01:00
#include "qapi/error.h"
#include "qapi/qapi-visit-common.h"
#include "qapi/qapi-visit-machine.h"
#include "qapi/visitor.h"
#include "qom/object_interfaces.h"
#include "hw/sysbus.h"
#include "sysemu/cpus.h"
#include "sysemu/sysemu.h"
#include "sysemu/reset.h"
#include "sysemu/runstate.h"
numa: equally distribute memory on nodes When there are more nodes than available memory to put the minimum allowed memory by node, all the memory is put on the last node. This is because we put (ram_size / nb_numa_nodes) & ~((1 << mc->numa_mem_align_shift) - 1); on each node, and in this case the value is 0. This is particularly true with pseries, as the memory must be aligned to 256MB. To avoid this problem, this patch uses an error diffusion algorithm [1] to distribute equally the memory on nodes. We introduce numa_auto_assign_ram() function in MachineClass to keep compatibility between machine type versions. The legacy function is used with pseries-2.9, pc-q35-2.9 and pc-i440fx-2.9 (and previous), the new one with all others. Example: qemu-system-ppc64 -S -nographic -nodefaults -monitor stdio -m 1G -smp 8 \ -numa node -numa node -numa node \ -numa node -numa node -numa node Before: (qemu) info numa 6 nodes node 0 cpus: 0 6 node 0 size: 0 MB node 1 cpus: 1 7 node 1 size: 0 MB node 2 cpus: 2 node 2 size: 0 MB node 3 cpus: 3 node 3 size: 0 MB node 4 cpus: 4 node 4 size: 0 MB node 5 cpus: 5 node 5 size: 1024 MB After: (qemu) info numa 6 nodes node 0 cpus: 0 6 node 0 size: 0 MB node 1 cpus: 1 7 node 1 size: 256 MB node 2 cpus: 2 node 2 size: 0 MB node 3 cpus: 3 node 3 size: 256 MB node 4 cpus: 4 node 4 size: 256 MB node 5 cpus: 5 node 5 size: 256 MB [1] https://en.wikipedia.org/wiki/Error_diffusion Signed-off-by: Laurent Vivier <lvivier@redhat.com> Message-Id: <20170502162955.1610-2-lvivier@redhat.com> Reviewed-by: Eduardo Habkost <ehabkost@redhat.com> [ehabkost: s/ram_size/size/ at numa_default_auto_assign_ram()] Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2017-05-02 18:29:55 +02:00
#include "sysemu/numa.h"
#include "sysemu/xen.h"
#include "qemu/error-report.h"
#include "sysemu/qtest.h"
#include "hw/pci/pci.h"
#include "hw/mem/nvdimm.h"
#include "migration/global_state.h"
#include "migration/vmstate.h"
#include "exec/confidential-guest-support.h"
#include "hw/virtio/virtio.h"
#include "hw/virtio/virtio-pci.h"
#include "qom/object_interfaces.h"
GlobalProperty hw_compat_7_0[] = {};
const size_t hw_compat_7_0_len = G_N_ELEMENTS(hw_compat_7_0);
GlobalProperty hw_compat_6_2[] = {
{ "PIIX4_PM", "x-not-migrate-acpi-index", "on"},
};
const size_t hw_compat_6_2_len = G_N_ELEMENTS(hw_compat_6_2);
GlobalProperty hw_compat_6_1[] = {
{ "vhost-user-vsock-device", "seqpacket", "off" },
{ "nvme-ns", "shared", "off" },
};
const size_t hw_compat_6_1_len = G_N_ELEMENTS(hw_compat_6_1);
GlobalProperty hw_compat_6_0[] = {
{ "gpex-pcihost", "allow-unmapped-accesses", "false" },
pckbd: don't update OBF flags if KBD_STAT_OBF is set Don't update the OBF flags in the status register and the cor- responding IRQ lines if KBD_STAT_OBF is set. Otherwise this may change the PS/2 event type. If the guest ISR was already scheduled, the changed event type will be rather surprising for the guest. This fixes a mouse event stream corruption. To reproduce the problem start a FreeDOS 1.2 guest with -machine pc,accel=kvm and -display gtk. The KVM in-kernel irqchip has to be enabled. Now open a text file with edit.exe in the guest and hold down the cursor right key and at the same time move the mouse around. You will quickly notice erratic mouse movements and unexpected mouse clicks. A trace file shows the mouse event stream corruption. Guest rip 0xce93 (f000:ce93) is the in al,0x60 instruction in the seabios mouse ISR, guest rip 0xceca (f000:ceca) is the in al,0x60 instruction in the seabios keyboard ISR. qemu-system-x86-5659 [007] .... 280.971116: tracing_mark_write: pckbd_kbd_update_irq kbd=0 aux=1 # gtk queues a mouse event qemu-system-x86-5665 [000] .... 280.971121: kvm_exit: reason EXTERNAL_INTERRUPT rip 0x22da info 0 800000fd qemu-system-x86-5665 [000] d..1 280.971122: kvm_entry: vcpu 0, rip 0x22da qemu-system-x86-5665 [000] .... 280.971123: kvm_exit: reason EXTERNAL_INTERRUPT rip 0x22da info 0 800000fd qemu-system-x86-5665 [000] d..1 280.971124: kvm_entry: vcpu 0, rip 0x22da qemu-system-x86-5665 [000] .... 280.971126: kvm_exit: reason IO_INSTRUCTION rip 0x110c8c info 640008 0 qemu-system-x86-5665 [000] .... 280.971176: tracing_mark_write: pckbd_kbd_read_status 0x3d # KBD_STAT_OBF and KBD_STAT_MOUSE_OBF set, the mouse ISR will # read data from the PS/2 controller. qemu-system-x86-5665 [000] d..1 280.971180: kvm_entry: vcpu 0, rip 0x110c8d qemu-system-x86-5665 [000] .... 280.971191: kvm_exit: reason EXTERNAL_INTERRUPT rip 0x110c8d info 0 800000f6 qemu-system-x86-5665 [000] d..1 280.971191: kvm_entry: vcpu 0, rip 0x110c8d qemu-system-x86-5665 [000] .... 280.971193: kvm_exit: reason IO_INSTRUCTION rip 0xce93 info 600048 0 # the mouse ISR wants to read data from the PS/2 controller qemu-system-x86-5659 [007] .... 280.971231: tracing_mark_write: pckbd_kbd_update_irq kbd=1 aux=0 qemu-system-x86-5659 [007] .... 280.971238: tracing_mark_write: pckbd_kbd_update_irq kbd=1 aux=0 # gtk queues a keyboard event 0xe0 0x4d (key right) qemu-system-x86-5665 [000] .... 280.971257: tracing_mark_write: pckbd_kbd_update_irq kbd=0 aux=1 qemu-system-x86-5665 [000] .... 280.971262: tracing_mark_write: pckbd_kbd_update_irq kbd=1 aux=0 # ps2_read_data() deasserts and reasserts the keyboard IRQ qemu-system-x86-5665 [000] .... 280.971266: tracing_mark_write: pckbd_kbd_read_data 0xe0 kbd # -> the mouse ISR receives keyboard data qemu-system-x86-5665 [000] d..1 280.971268: kvm_entry: vcpu 0, rip 0xce95 qemu-system-x86-5665 [000] .... 280.971269: kvm_exit: reason IO_INSTRUCTION rip 0xe828 info a00040 0 qemu-system-x86-5665 [000] .... 280.971270: kvm_ack_irq: irqchip PIC slave pin 12 qemu-system-x86-5665 [000] d..1 280.971270: kvm_entry: vcpu 0, rip 0xe82a qemu-system-x86-5665 [000] .... 280.971271: kvm_exit: reason IO_INSTRUCTION rip 0xe82a info 200040 0 qemu-system-x86-5665 [000] .... 280.971271: kvm_ack_irq: irqchip PIC master pin 2 qemu-system-x86-5665 [000] d..1 280.971271: kvm_entry: vcpu 0, rip 0xe82c qemu-system-x86-5665 [000] .... 280.971272: kvm_exit: reason PENDING_INTERRUPT rip 0x22da info 0 0 qemu-system-x86-5665 [000] d..1 280.971273: kvm_entry: vcpu 0, rip 0x22da qemu-system-x86-5665 [000] .... 280.971274: kvm_exit: reason IO_INSTRUCTION rip 0x110c8c info 640008 0 qemu-system-x86-5665 [000] .... 280.971275: tracing_mark_write: pckbd_kbd_read_status 0x1d qemu-system-x86-5665 [000] d..1 280.971276: kvm_entry: vcpu 0, rip 0x110c8d qemu-system-x86-5665 [000] .... 280.971277: kvm_exit: reason IO_INSTRUCTION rip 0xceca info 600048 0 # the keyboard ISR wants to read data from the PS/2 controller qemu-system-x86-5665 [000] .... 280.971279: tracing_mark_write: pckbd_kbd_update_irq kbd=0 aux=1 qemu-system-x86-5665 [000] .... 280.971282: tracing_mark_write: pckbd_kbd_read_data 0x4d kbd # the keyboard ISR receives the second byte of the keyboard event Signed-off-by: Volker Rümelin <vr_qemu@t-online.de> Message-Id: <20210525181441.27768-5-vr_qemu@t-online.de> [ kraxel: add missing include ] Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2021-05-25 20:14:34 +02:00
{ "i8042", "extended-state", "false"},
{ "nvme-ns", "eui64-default", "off"},
{ "e1000", "init-vet", "off" },
{ "e1000e", "init-vet", "off" },
{ "vhost-vsock-device", "seqpacket", "off" },
};
const size_t hw_compat_6_0_len = G_N_ELEMENTS(hw_compat_6_0);
GlobalProperty hw_compat_5_2[] = {
{ "ICH9-LPC", "smm-compat", "on"},
{ "PIIX4_PM", "smm-compat", "on"},
{ "virtio-blk-device", "report-discard-granularity", "off" },
{ "virtio-net-pci-base", "vectors", "3"},
};
const size_t hw_compat_5_2_len = G_N_ELEMENTS(hw_compat_5_2);
GlobalProperty hw_compat_5_1[] = {
{ "vhost-scsi", "num_queues", "1"},
{ "vhost-user-blk", "num-queues", "1"},
{ "vhost-user-scsi", "num_queues", "1"},
{ "virtio-blk-device", "num-queues", "1"},
{ "virtio-scsi-device", "num_queues", "1"},
{ "nvme", "use-intel-id", "on"},
{ "pvpanic", "events", "1"}, /* PVPANIC_PANICKED */
{ "pl011", "migrate-clk", "off" },
{ "virtio-pci", "x-ats-page-aligned", "off"},
};
const size_t hw_compat_5_1_len = G_N_ELEMENTS(hw_compat_5_1);
GlobalProperty hw_compat_5_0[] = {
hw/pci-host: save/restore pci host config register The pci host config register is used to save PCI address for read/write config data. If guest writes a value to config register, and then QEMU pauses the vcpu to migrate, after the migration, the guest will continue to write pci config data, and the write data will be ignored because of new qemu process losing the config register state. To trigger the bug: 1. guest is booting in seabios. 2. guest enables the SMRAM in seabios:piix4_apmc_smm_setup, and then expects to disable the SMRAM by pci_config_writeb. 3. after guest writes the pci host config register, QEMU pauses vcpu to finish migration. 4. guest write of config data(0x0A) fails to disable the SMRAM because the config register state is lost. 5. guest continues to boot and crashes in ipxe option ROM due to SMRAM in enabled state. Example Reproducer: step 1. Make modifications to seabios and qemu for increase reproduction efficiency, write 0xf0 to 0x402 port notify qemu to stop vcpu after 0x0cf8 port wrote i440 configure register. qemu stop vcpu when catch 0x402 port wrote 0xf0. seabios:/src/hw/pci.c @@ -52,6 +52,11 @@ void pci_config_writeb(u16 bdf, u32 addr, u8 val) writeb(mmconfig_addr(bdf, addr), val); } else { outl(ioconfig_cmd(bdf, addr), PORT_PCI_CMD); + if (bdf == 0 && addr == 0x72 && val == 0xa) { + dprintf(1, "stop vcpu\n"); + outb(0xf0, 0x402); // notify qemu to stop vcpu + dprintf(1, "resume vcpu\n"); + } outb(val, PORT_PCI_DATA + (addr & 3)); } } qemu:hw/char/debugcon.c @@ -60,6 +61,9 @@ static void debugcon_ioport_write(void *opaque, hwaddr addr, uint64_t val, printf(" [debugcon: write addr=0x%04" HWADDR_PRIx " val=0x%02" PRIx64 "]\n", addr, val); #endif + if (ch == 0xf0) { + vm_stop(RUN_STATE_PAUSED); + } /* XXX this blocks entire thread. Rewrite to use * qemu_chr_fe_write and background I/O callbacks */ qemu_chr_fe_write_all(&s->chr, &ch, 1); step 2. start vm1 by the following command line, and then vm stopped. $ qemu-system-x86_64 -machine pc-i440fx-5.0,accel=kvm\ -netdev tap,ifname=tap-test,id=hostnet0,vhost=on,downscript=no,script=no\ -device virtio-net-pci,netdev=hostnet0,id=net0,bus=pci.0,addr=0x13,bootindex=3\ -device cirrus-vga,id=video0,vgamem_mb=16,bus=pci.0,addr=0x2\ -chardev file,id=seabios,path=/var/log/test.seabios,append=on\ -device isa-debugcon,iobase=0x402,chardev=seabios\ -monitor stdio step 3. start vm2 to accept vm1 state. $ qemu-system-x86_64 -machine pc-i440fx-5.0,accel=kvm\ -netdev tap,ifname=tap-test1,id=hostnet0,vhost=on,downscript=no,script=no\ -device virtio-net-pci,netdev=hostnet0,id=net0,bus=pci.0,addr=0x13,bootindex=3\ -device cirrus-vga,id=video0,vgamem_mb=16,bus=pci.0,addr=0x2\ -chardev file,id=seabios,path=/var/log/test.seabios,append=on\ -device isa-debugcon,iobase=0x402,chardev=seabios\ -monitor stdio \ -incoming tcp:127.0.0.1:8000 step 4. execute the following qmp command in vm1 to migrate. (qemu) migrate tcp:127.0.0.1:8000 step 5. execute the following qmp command in vm2 to resume vcpu. (qemu) cont Before this patch, we get KVM "emulation failure" error on vm2. This patch fixes it. Cc: qemu-stable@nongnu.org Signed-off-by: Hogan Wang <hogan.wang@huawei.com> Message-Id: <20200727084621.3279-1-hogan.wang@huawei.com> Reported-by: "Dr. David Alan Gilbert" <dgilbert@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-07-27 10:46:20 +02:00
{ "pci-host-bridge", "x-config-reg-migration-enabled", "off" },
{ "virtio-balloon-device", "page-poison", "false" },
{ "vmport", "x-read-set-eax", "off" },
{ "vmport", "x-signal-unsupported-cmd", "off" },
{ "vmport", "x-report-vmx-type", "off" },
{ "vmport", "x-cmds-v2", "off" },
{ "virtio-device", "x-disable-legacy-check", "true" },
};
const size_t hw_compat_5_0_len = G_N_ELEMENTS(hw_compat_5_0);
GlobalProperty hw_compat_4_2[] = {
{ "virtio-blk-device", "queue-size", "128"},
{ "virtio-scsi-device", "virtqueue_size", "128"},
{ "virtio-blk-device", "x-enable-wce-if-config-wce", "off" },
{ "virtio-blk-device", "seg-max-adjust", "off"},
{ "virtio-scsi-device", "seg_max_adjust", "off"},
{ "vhost-blk-device", "seg_max_adjust", "off"},
{ "usb-host", "suppress-remote-wake", "off" },
{ "usb-redir", "suppress-remote-wake", "off" },
{ "qxl", "revision", "4" },
{ "qxl-vga", "revision", "4" },
{ "fw_cfg", "acpi-mr-restore", "false" },
virtio: move 'use-disabled-flag' property to hw_compat_4_2 Commit 9d7bd0826f introduced a new 'use-disabled-flag' property set to true by default. To allow the migration, we set this property to false in the hw_compat, but in the wrong place (hw_compat_4_1). Since commit 9d7bd0826f was released with QEMU 5.0, we move 'use-disabled-flag' property to hw_compat_4_2, so 4.2 machine types will have the pre-patch behavior and the migration can work. The issue was discovered with vhost-vsock device and 4.2 machine type without running any kernel in the VM: $ qemu-4.2 -M pc-q35-4.2,accel=kvm \ -device vhost-vsock-pci,guest-cid=4 \ -monitor stdio -incoming tcp:0:3333 $ qemu-5.2 -M pc-q35-4.2,accel=kvm \ -device vhost-vsock-pci,guest-cid=3 \ -monitor stdio (qemu) migrate -d tcp:0:3333 # qemu-4.2 output qemu-system-x86_64: Failed to load virtio-vhost_vsock:virtio qemu-system-x86_64: error while loading state for instance 0x0 of device '0000:00:03.0/virtio-vhost_vsock' qemu-system-x86_64: load of migration failed: No such file or directory Reported-by: Jing Zhao <jinzhao@redhat.com> Buglink: https://bugzilla.redhat.com/show_bug.cgi?id=1907255 Fixes: 9d7bd0826f ("virtio-pci: disable vring processing when bus-mastering is disabled") Cc: mdroth@linux.vnet.ibm.com CC: qemu-stable@nongnu.org Signed-off-by: Stefano Garzarella <sgarzare@redhat.com> Message-Id: <20210108171252.209502-1-sgarzare@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2021-01-08 18:12:52 +01:00
{ "virtio-device", "use-disabled-flag", "false" },
};
const size_t hw_compat_4_2_len = G_N_ELEMENTS(hw_compat_4_2);
GlobalProperty hw_compat_4_1[] = {
{ "virtio-pci", "x-pcie-flr-init", "off" },
};
const size_t hw_compat_4_1_len = G_N_ELEMENTS(hw_compat_4_1);
hw: Nuke hw_compat_4_0_1 and pc_compat_4_0_1 Commit c87759ce876a fixed a regression affecting pc-q35 machines by introducing a new pc-q35-4.0.1 machine version to be used instead of pc-q35-4.0. The only purpose was to revert the default behaviour of not using split irqchip, but the change also introduced the usual hw_compat and pc_compat bits, and wired them for pc-q35 only. This raises questions when it comes to add new compat properties for 4.0* machine versions of any architecture. Where to add them ? In 4.0, 4.0.1 or both ? Error prone. Another possibility would be to teach all other architectures about 4.0.1. This solution isn't satisfying, especially since this is a pc-q35 specific issue. It turns out that the split irqchip default is handled in the machine option function and doesn't involve compat lists at all. Drop all the 4.0.1 compat lists and use the 4.0 ones instead in the 4.0.1 machine option function. Move the compat props that were added to the 4.0.1 since c87759ce876a to 4.0. Even if only hw_compat_4_0_1 had an impact on other architectures, drop pc_compat_4_0_1 as well for consistency. Fixes: c87759ce876a "q35: Revert to kernel irqchip" Suggested-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: Greg Kurz <groug@kaod.org> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Message-Id: <156051774276.244890.8660277280145466396.stgit@bahia.lan> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-06-14 15:09:02 +02:00
GlobalProperty hw_compat_4_0[] = {
{ "VGA", "edid", "false" },
{ "secondary-vga", "edid", "false" },
{ "bochs-display", "edid", "false" },
{ "virtio-vga", "edid", "false" },
{ "virtio-gpu-device", "edid", "false" },
{ "virtio-device", "use-started", "false" },
{ "virtio-balloon-device", "qemu-4-0-config-size", "true" },
{ "pl031", "migrate-tick-offset", "false" },
};
const size_t hw_compat_4_0_len = G_N_ELEMENTS(hw_compat_4_0);
GlobalProperty hw_compat_3_1[] = {
{ "pcie-root-port", "x-speed", "2_5" },
{ "pcie-root-port", "x-width", "1" },
{ "memory-backend-file", "x-use-canonical-path-for-ramblock-id", "true" },
{ "memory-backend-memfd", "x-use-canonical-path-for-ramblock-id", "true" },
{ "tpm-crb", "ppi", "false" },
{ "tpm-tis", "ppi", "false" },
2019-01-10 13:51:08 +01:00
{ "usb-kbd", "serial", "42" },
{ "usb-mouse", "serial", "42" },
{ "usb-tablet", "serial", "42" },
{ "virtio-blk-device", "discard", "false" },
{ "virtio-blk-device", "write-zeroes", "false" },
{ "virtio-balloon-device", "qemu-4-0-config-size", "false" },
{ "pcie-root-port-base", "disable-acs", "true" }, /* Added in 4.1 */
};
const size_t hw_compat_3_1_len = G_N_ELEMENTS(hw_compat_3_1);
GlobalProperty hw_compat_3_0[] = {};
const size_t hw_compat_3_0_len = G_N_ELEMENTS(hw_compat_3_0);
GlobalProperty hw_compat_2_12[] = {
{ "migration", "decompress-error-check", "off" },
{ "hda-audio", "use-timer", "false" },
{ "cirrus-vga", "global-vmstate", "true" },
{ "VGA", "global-vmstate", "true" },
{ "vmware-svga", "global-vmstate", "true" },
{ "qxl-vga", "global-vmstate", "true" },
};
const size_t hw_compat_2_12_len = G_N_ELEMENTS(hw_compat_2_12);
GlobalProperty hw_compat_2_11[] = {
{ "hpet", "hpet-offset-saved", "false" },
{ "virtio-blk-pci", "vectors", "2" },
{ "vhost-user-blk-pci", "vectors", "2" },
{ "e1000", "migrate_tso_props", "off" },
};
const size_t hw_compat_2_11_len = G_N_ELEMENTS(hw_compat_2_11);
GlobalProperty hw_compat_2_10[] = {
{ "virtio-mouse-device", "wheel-axis", "false" },
{ "virtio-tablet-device", "wheel-axis", "false" },
};
const size_t hw_compat_2_10_len = G_N_ELEMENTS(hw_compat_2_10);
GlobalProperty hw_compat_2_9[] = {
{ "pci-bridge", "shpc", "off" },
{ "intel-iommu", "pt", "off" },
{ "virtio-net-device", "x-mtu-bypass-backend", "off" },
{ "pcie-root-port", "x-migrate-msix", "false" },
};
const size_t hw_compat_2_9_len = G_N_ELEMENTS(hw_compat_2_9);
GlobalProperty hw_compat_2_8[] = {
{ "fw_cfg_mem", "x-file-slots", "0x10" },
{ "fw_cfg_io", "x-file-slots", "0x10" },
{ "pflash_cfi01", "old-multiple-chip-handling", "on" },
{ "pci-bridge", "shpc", "on" },
{ TYPE_PCI_DEVICE, "x-pcie-extcap-init", "off" },
{ "virtio-pci", "x-pcie-deverr-init", "off" },
{ "virtio-pci", "x-pcie-lnkctl-init", "off" },
{ "virtio-pci", "x-pcie-pm-init", "off" },
{ "cirrus-vga", "vgamem_mb", "8" },
{ "isa-cirrus-vga", "vgamem_mb", "8" },
};
const size_t hw_compat_2_8_len = G_N_ELEMENTS(hw_compat_2_8);
GlobalProperty hw_compat_2_7[] = {
{ "virtio-pci", "page-per-vq", "on" },
{ "virtio-serial-device", "emergency-write", "off" },
{ "ioapic", "version", "0x11" },
{ "intel-iommu", "x-buggy-eim", "true" },
{ "virtio-pci", "x-ignore-backend-features", "on" },
};
const size_t hw_compat_2_7_len = G_N_ELEMENTS(hw_compat_2_7);
GlobalProperty hw_compat_2_6[] = {
{ "virtio-mmio", "format_transport_address", "off" },
/* Optional because not all virtio-pci devices support legacy mode */
{ "virtio-pci", "disable-modern", "on", .optional = true },
{ "virtio-pci", "disable-legacy", "off", .optional = true },
};
const size_t hw_compat_2_6_len = G_N_ELEMENTS(hw_compat_2_6);
GlobalProperty hw_compat_2_5[] = {
{ "isa-fdc", "fallback", "144" },
{ "pvscsi", "x-old-pci-configuration", "on" },
{ "pvscsi", "x-disable-pcie", "on" },
{ "vmxnet3", "x-old-msi-offsets", "on" },
{ "vmxnet3", "x-disable-pcie", "on" },
};
const size_t hw_compat_2_5_len = G_N_ELEMENTS(hw_compat_2_5);
GlobalProperty hw_compat_2_4[] = {
/* Optional because the 'scsi' property is Linux-only */
{ "virtio-blk-device", "scsi", "true", .optional = true },
{ "e1000", "extra_mac_registers", "off" },
{ "virtio-pci", "x-disable-pcie", "on" },
{ "virtio-pci", "migrate-extra", "off" },
{ "fw_cfg_mem", "dma_enabled", "off" },
{ "fw_cfg_io", "dma_enabled", "off" }
};
const size_t hw_compat_2_4_len = G_N_ELEMENTS(hw_compat_2_4);
GlobalProperty hw_compat_2_3[] = {
{ "virtio-blk-pci", "any_layout", "off" },
{ "virtio-balloon-pci", "any_layout", "off" },
{ "virtio-serial-pci", "any_layout", "off" },
{ "virtio-9p-pci", "any_layout", "off" },
{ "virtio-rng-pci", "any_layout", "off" },
{ TYPE_PCI_DEVICE, "x-pcie-lnksta-dllla", "off" },
{ "migration", "send-configuration", "off" },
{ "migration", "send-section-footer", "off" },
{ "migration", "store-global-state", "off" },
};
const size_t hw_compat_2_3_len = G_N_ELEMENTS(hw_compat_2_3);
GlobalProperty hw_compat_2_2[] = {};
const size_t hw_compat_2_2_len = G_N_ELEMENTS(hw_compat_2_2);
GlobalProperty hw_compat_2_1[] = {
{ "intel-hda", "old_msi_addr", "on" },
{ "VGA", "qemu-extended-regs", "off" },
{ "secondary-vga", "qemu-extended-regs", "off" },
{ "virtio-scsi-pci", "any_layout", "off" },
{ "usb-mouse", "usb_version", "1" },
{ "usb-kbd", "usb_version", "1" },
{ "virtio-pci", "virtio-pci-bus-master-bug-migration", "on" },
};
const size_t hw_compat_2_1_len = G_N_ELEMENTS(hw_compat_2_1);
MachineState *current_machine;
static char *machine_get_kernel(Object *obj, Error **errp)
{
MachineState *ms = MACHINE(obj);
return g_strdup(ms->kernel_filename);
}
static void machine_set_kernel(Object *obj, const char *value, Error **errp)
{
MachineState *ms = MACHINE(obj);
g_free(ms->kernel_filename);
ms->kernel_filename = g_strdup(value);
}
static char *machine_get_initrd(Object *obj, Error **errp)
{
MachineState *ms = MACHINE(obj);
return g_strdup(ms->initrd_filename);
}
static void machine_set_initrd(Object *obj, const char *value, Error **errp)
{
MachineState *ms = MACHINE(obj);
g_free(ms->initrd_filename);
ms->initrd_filename = g_strdup(value);
}
static char *machine_get_append(Object *obj, Error **errp)
{
MachineState *ms = MACHINE(obj);
return g_strdup(ms->kernel_cmdline);
}
static void machine_set_append(Object *obj, const char *value, Error **errp)
{
MachineState *ms = MACHINE(obj);
g_free(ms->kernel_cmdline);
ms->kernel_cmdline = g_strdup(value);
}
static char *machine_get_dtb(Object *obj, Error **errp)
{
MachineState *ms = MACHINE(obj);
return g_strdup(ms->dtb);
}
static void machine_set_dtb(Object *obj, const char *value, Error **errp)
{
MachineState *ms = MACHINE(obj);
g_free(ms->dtb);
ms->dtb = g_strdup(value);
}
static char *machine_get_dumpdtb(Object *obj, Error **errp)
{
MachineState *ms = MACHINE(obj);
return g_strdup(ms->dumpdtb);
}
static void machine_set_dumpdtb(Object *obj, const char *value, Error **errp)
{
MachineState *ms = MACHINE(obj);
g_free(ms->dumpdtb);
ms->dumpdtb = g_strdup(value);
}
static void machine_get_phandle_start(Object *obj, Visitor *v,
const char *name, void *opaque,
Error **errp)
{
MachineState *ms = MACHINE(obj);
int64_t value = ms->phandle_start;
qapi: Swap visit_* arguments for consistent 'name' placement JSON uses "name":value, but many of our visitor interfaces were called with visit_type_FOO(v, &value, name, errp). This can be a bit confusing to have to mentally swap the parameter order to match JSON order. It's particularly bad for visit_start_struct(), where the 'name' parameter is smack in the middle of the otherwise-related group of 'obj, kind, size' parameters! It's time to do a global swap of the parameter ordering, so that the 'name' parameter is always immediately after the Visitor argument. Additional reason in favor of the swap: the existing include/qjson.h prefers listing 'name' first in json_prop_*(), and I have plans to unify that file with the qapi visitors; listing 'name' first in qapi will minimize churn to the (admittedly few) qjson.h clients. Later patches will then fix docs, object.h, visitor-impl.h, and those clients to match. Done by first patching scripts/qapi*.py by hand to make generated files do what I want, then by running the following Coccinelle script to affect the rest of the code base: $ spatch --sp-file script `git grep -l '\bvisit_' -- '**/*.[ch]'` I then had to apply some touchups (Coccinelle insisted on TAB indentation in visitor.h, and botched the signature of visit_type_enum() by rewriting 'const char *const strings[]' to the syntactically invalid 'const char*const[] strings'). The movement of parameters is sufficient to provoke compiler errors if any callers were missed. // Part 1: Swap declaration order @@ type TV, TErr, TObj, T1, T2; identifier OBJ, ARG1, ARG2; @@ void visit_start_struct -(TV v, TObj OBJ, T1 ARG1, const char *name, T2 ARG2, TErr errp) +(TV v, const char *name, TObj OBJ, T1 ARG1, T2 ARG2, TErr errp) { ... } @@ type bool, TV, T1; identifier ARG1; @@ bool visit_optional -(TV v, T1 ARG1, const char *name) +(TV v, const char *name, T1 ARG1) { ... } @@ type TV, TErr, TObj, T1; identifier OBJ, ARG1; @@ void visit_get_next_type -(TV v, TObj OBJ, T1 ARG1, const char *name, TErr errp) +(TV v, const char *name, TObj OBJ, T1 ARG1, TErr errp) { ... } @@ type TV, TErr, TObj, T1, T2; identifier OBJ, ARG1, ARG2; @@ void visit_type_enum -(TV v, TObj OBJ, T1 ARG1, T2 ARG2, const char *name, TErr errp) +(TV v, const char *name, TObj OBJ, T1 ARG1, T2 ARG2, TErr errp) { ... } @@ type TV, TErr, TObj; identifier OBJ; identifier VISIT_TYPE =~ "^visit_type_"; @@ void VISIT_TYPE -(TV v, TObj OBJ, const char *name, TErr errp) +(TV v, const char *name, TObj OBJ, TErr errp) { ... } // Part 2: swap caller order @@ expression V, NAME, OBJ, ARG1, ARG2, ERR; identifier VISIT_TYPE =~ "^visit_type_"; @@ ( -visit_start_struct(V, OBJ, ARG1, NAME, ARG2, ERR) +visit_start_struct(V, NAME, OBJ, ARG1, ARG2, ERR) | -visit_optional(V, ARG1, NAME) +visit_optional(V, NAME, ARG1) | -visit_get_next_type(V, OBJ, ARG1, NAME, ERR) +visit_get_next_type(V, NAME, OBJ, ARG1, ERR) | -visit_type_enum(V, OBJ, ARG1, ARG2, NAME, ERR) +visit_type_enum(V, NAME, OBJ, ARG1, ARG2, ERR) | -VISIT_TYPE(V, OBJ, NAME, ERR) +VISIT_TYPE(V, NAME, OBJ, ERR) ) Signed-off-by: Eric Blake <eblake@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <1454075341-13658-19-git-send-email-eblake@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-01-29 14:48:54 +01:00
visit_type_int(v, name, &value, errp);
}
static void machine_set_phandle_start(Object *obj, Visitor *v,
const char *name, void *opaque,
Error **errp)
{
MachineState *ms = MACHINE(obj);
int64_t value;
error: Eliminate error_propagate() with Coccinelle, part 1 When all we do with an Error we receive into a local variable is propagating to somewhere else, we can just as well receive it there right away. Convert if (!foo(..., &err)) { ... error_propagate(errp, err); ... return ... } to if (!foo(..., errp)) { ... ... return ... } where nothing else needs @err. Coccinelle script: @rule1 forall@ identifier fun, err, errp, lbl; expression list args, args2; binary operator op; constant c1, c2; symbol false; @@ if ( ( - fun(args, &err, args2) + fun(args, errp, args2) | - !fun(args, &err, args2) + !fun(args, errp, args2) | - fun(args, &err, args2) op c1 + fun(args, errp, args2) op c1 ) ) { ... when != err when != lbl: when strict - error_propagate(errp, err); ... when != err ( return; | return c2; | return false; ) } @rule2 forall@ identifier fun, err, errp, lbl; expression list args, args2; expression var; binary operator op; constant c1, c2; symbol false; @@ - var = fun(args, &err, args2); + var = fun(args, errp, args2); ... when != err if ( ( var | !var | var op c1 ) ) { ... when != err when != lbl: when strict - error_propagate(errp, err); ... when != err ( return; | return c2; | return false; | return var; ) } @depends on rule1 || rule2@ identifier err; @@ - Error *err = NULL; ... when != err Not exactly elegant, I'm afraid. The "when != lbl:" is necessary to avoid transforming if (fun(args, &err)) { goto out } ... out: error_propagate(errp, err); even though other paths to label out still need the error_propagate(). For an actual example, see sclp_realize(). Without the "when strict", Coccinelle transforms vfio_msix_setup(), incorrectly. I don't know what exactly "when strict" does, only that it helps here. The match of return is narrower than what I want, but I can't figure out how to express "return where the operand doesn't use @err". For an example where it's too narrow, see vfio_intx_enable(). Silently fails to convert hw/arm/armsse.c, because Coccinelle gets confused by ARMSSE being used both as typedef and function-like macro there. Converted manually. Line breaks tidied up manually. One nested declaration of @local_err deleted manually. Preexisting unwanted blank line dropped in hw/riscv/sifive_e.c. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-Id: <20200707160613.848843-35-armbru@redhat.com>
2020-07-07 18:06:02 +02:00
if (!visit_type_int(v, name, &value, errp)) {
return;
}
ms->phandle_start = value;
}
static char *machine_get_dt_compatible(Object *obj, Error **errp)
{
MachineState *ms = MACHINE(obj);
return g_strdup(ms->dt_compatible);
}
static void machine_set_dt_compatible(Object *obj, const char *value, Error **errp)
{
MachineState *ms = MACHINE(obj);
g_free(ms->dt_compatible);
ms->dt_compatible = g_strdup(value);
}
static bool machine_get_dump_guest_core(Object *obj, Error **errp)
{
MachineState *ms = MACHINE(obj);
return ms->dump_guest_core;
}
static void machine_set_dump_guest_core(Object *obj, bool value, Error **errp)
{
MachineState *ms = MACHINE(obj);
ms->dump_guest_core = value;
}
static bool machine_get_mem_merge(Object *obj, Error **errp)
{
MachineState *ms = MACHINE(obj);
return ms->mem_merge;
}
static void machine_set_mem_merge(Object *obj, bool value, Error **errp)
{
MachineState *ms = MACHINE(obj);
ms->mem_merge = value;
}
static bool machine_get_usb(Object *obj, Error **errp)
{
MachineState *ms = MACHINE(obj);
return ms->usb;
}
static void machine_set_usb(Object *obj, bool value, Error **errp)
{
MachineState *ms = MACHINE(obj);
ms->usb = value;
ms->usb_disabled = !value;
}
static bool machine_get_graphics(Object *obj, Error **errp)
{
MachineState *ms = MACHINE(obj);
return ms->enable_graphics;
}
static void machine_set_graphics(Object *obj, bool value, Error **errp)
{
MachineState *ms = MACHINE(obj);
ms->enable_graphics = value;
}
static char *machine_get_firmware(Object *obj, Error **errp)
{
MachineState *ms = MACHINE(obj);
return g_strdup(ms->firmware);
}
static void machine_set_firmware(Object *obj, const char *value, Error **errp)
{
MachineState *ms = MACHINE(obj);
g_free(ms->firmware);
ms->firmware = g_strdup(value);
}
static void machine_set_suppress_vmdesc(Object *obj, bool value, Error **errp)
{
MachineState *ms = MACHINE(obj);
ms->suppress_vmdesc = value;
}
static bool machine_get_suppress_vmdesc(Object *obj, Error **errp)
{
MachineState *ms = MACHINE(obj);
return ms->suppress_vmdesc;
}
static char *machine_get_memory_encryption(Object *obj, Error **errp)
{
MachineState *ms = MACHINE(obj);
if (ms->cgs) {
return g_strdup(object_get_canonical_path_component(OBJECT(ms->cgs)));
}
return NULL;
}
static void machine_set_memory_encryption(Object *obj, const char *value,
Error **errp)
{
Object *cgs =
object_resolve_path_component(object_get_objects_root(), value);
if (!cgs) {
error_setg(errp, "No such memory encryption object '%s'", value);
return;
}
object_property_set_link(obj, "confidential-guest-support", cgs, errp);
}
static void machine_check_confidential_guest_support(const Object *obj,
const char *name,
Object *new_target,
Error **errp)
{
/*
* So far the only constraint is that the target has the
* TYPE_CONFIDENTIAL_GUEST_SUPPORT interface, and that's checked
* by the QOM core
*/
}
static bool machine_get_nvdimm(Object *obj, Error **errp)
{
MachineState *ms = MACHINE(obj);
return ms->nvdimms_state->is_enabled;
}
static void machine_set_nvdimm(Object *obj, bool value, Error **errp)
{
MachineState *ms = MACHINE(obj);
ms->nvdimms_state->is_enabled = value;
}
static bool machine_get_hmat(Object *obj, Error **errp)
{
MachineState *ms = MACHINE(obj);
return ms->numa_state->hmat_enabled;
}
static void machine_set_hmat(Object *obj, bool value, Error **errp)
{
MachineState *ms = MACHINE(obj);
ms->numa_state->hmat_enabled = value;
}
static void machine_get_mem(Object *obj, Visitor *v, const char *name,
void *opaque, Error **errp)
{
MachineState *ms = MACHINE(obj);
MemorySizeConfiguration mem = {
.has_size = true,
.size = ms->ram_size,
.has_max_size = !!ms->ram_slots,
.max_size = ms->maxram_size,
.has_slots = !!ms->ram_slots,
.slots = ms->ram_slots,
};
MemorySizeConfiguration *p_mem = &mem;
visit_type_MemorySizeConfiguration(v, name, &p_mem, &error_abort);
}
static void machine_set_mem(Object *obj, Visitor *v, const char *name,
void *opaque, Error **errp)
{
MachineState *ms = MACHINE(obj);
MachineClass *mc = MACHINE_GET_CLASS(obj);
MemorySizeConfiguration *mem;
ERRP_GUARD();
if (!visit_type_MemorySizeConfiguration(v, name, &mem, errp)) {
return;
}
if (!mem->has_size) {
mem->has_size = true;
mem->size = mc->default_ram_size;
}
mem->size = QEMU_ALIGN_UP(mem->size, 8192);
if (mc->fixup_ram_size) {
mem->size = mc->fixup_ram_size(mem->size);
}
if ((ram_addr_t)mem->size != mem->size) {
error_setg(errp, "ram size too large");
goto out_free;
}
if (mem->has_max_size) {
if (mem->max_size < mem->size) {
error_setg(errp, "invalid value of maxmem: "
"maximum memory size (0x%" PRIx64 ") must be at least "
"the initial memory size (0x%" PRIx64 ")",
mem->max_size, mem->size);
goto out_free;
}
if (mem->has_slots && mem->slots && mem->max_size == mem->size) {
error_setg(errp, "invalid value of maxmem: "
"memory slots were specified but maximum memory size "
"(0x%" PRIx64 ") is equal to the initial memory size "
"(0x%" PRIx64 ")", mem->max_size, mem->size);
goto out_free;
}
ms->maxram_size = mem->max_size;
} else {
if (mem->has_slots) {
error_setg(errp, "slots specified but no max-size");
goto out_free;
}
ms->maxram_size = mem->size;
}
ms->ram_size = mem->size;
ms->ram_slots = mem->has_slots ? mem->slots : 0;
out_free:
qapi_free_MemorySizeConfiguration(mem);
}
static char *machine_get_nvdimm_persistence(Object *obj, Error **errp)
{
MachineState *ms = MACHINE(obj);
return g_strdup(ms->nvdimms_state->persistence_string);
}
static void machine_set_nvdimm_persistence(Object *obj, const char *value,
Error **errp)
{
MachineState *ms = MACHINE(obj);
NVDIMMState *nvdimms_state = ms->nvdimms_state;
if (strcmp(value, "cpu") == 0) {
nvdimms_state->persistence = 3;
} else if (strcmp(value, "mem-ctrl") == 0) {
nvdimms_state->persistence = 2;
} else {
error_setg(errp, "-machine nvdimm-persistence=%s: unsupported option",
value);
return;
}
g_free(nvdimms_state->persistence_string);
nvdimms_state->persistence_string = g_strdup(value);
}
void machine_class_allow_dynamic_sysbus_dev(MachineClass *mc, const char *type)
{
QAPI_LIST_PREPEND(mc->allowed_dynamic_sysbus_devices, g_strdup(type));
}
bool device_is_dynamic_sysbus(MachineClass *mc, DeviceState *dev)
{
Object *obj = OBJECT(dev);
if (!object_dynamic_cast(obj, TYPE_SYS_BUS_DEVICE)) {
return false;
}
return device_type_is_dynamic_sysbus(mc, object_get_typename(obj));
}
bool device_type_is_dynamic_sysbus(MachineClass *mc, const char *type)
{
bool allowed = false;
strList *wl;
ObjectClass *klass = object_class_by_name(type);
for (wl = mc->allowed_dynamic_sysbus_devices;
!allowed && wl;
wl = wl->next) {
allowed |= !!object_class_dynamic_cast(klass, wl->value);
}
return allowed;
}
HotpluggableCPUList *machine_query_hotpluggable_cpus(MachineState *machine)
{
int i;
HotpluggableCPUList *head = NULL;
MachineClass *mc = MACHINE_GET_CLASS(machine);
/* force board to initialize possible_cpus if it hasn't been done yet */
mc->possible_cpu_arch_ids(machine);
for (i = 0; i < machine->possible_cpus->len; i++) {
Object *cpu;
HotpluggableCPU *cpu_item = g_new0(typeof(*cpu_item), 1);
cpu_item->type = g_strdup(machine->possible_cpus->cpus[i].type);
cpu_item->vcpus_count = machine->possible_cpus->cpus[i].vcpus_count;
cpu_item->props = g_memdup(&machine->possible_cpus->cpus[i].props,
sizeof(*cpu_item->props));
cpu = machine->possible_cpus->cpus[i].cpu;
if (cpu) {
cpu_item->has_qom_path = true;
cpu_item->qom_path = object_get_canonical_path(cpu);
}
QAPI_LIST_PREPEND(head, cpu_item);
}
return head;
}
/**
* machine_set_cpu_numa_node:
* @machine: machine object to modify
* @props: specifies which cpu objects to assign to
* numa node specified by @props.node_id
* @errp: if an error occurs, a pointer to an area to store the error
*
* Associate NUMA node specified by @props.node_id with cpu slots that
* match socket/core/thread-ids specified by @props. It's recommended to use
* query-hotpluggable-cpus.props values to specify affected cpu slots,
* which would lead to exact 1:1 mapping of cpu slots to NUMA node.
*
* However for CLI convenience it's possible to pass in subset of properties,
* which would affect all cpu slots that match it.
* Ex for pc machine:
* -smp 4,cores=2,sockets=2 -numa node,nodeid=0 -numa node,nodeid=1 \
* -numa cpu,node-id=0,socket_id=0 \
* -numa cpu,node-id=1,socket_id=1
* will assign all child cores of socket 0 to node 0 and
* of socket 1 to node 1.
*
* On attempt of reassigning (already assigned) cpu slot to another NUMA node,
* return error.
* Empty subset is disallowed and function will return with error in this case.
*/
void machine_set_cpu_numa_node(MachineState *machine,
const CpuInstanceProperties *props, Error **errp)
{
MachineClass *mc = MACHINE_GET_CLASS(machine);
NodeInfo *numa_info = machine->numa_state->nodes;
bool match = false;
int i;
if (!mc->possible_cpu_arch_ids) {
error_setg(errp, "mapping of CPUs to NUMA node is not supported");
return;
}
/* disabling node mapping is not supported, forbid it */
assert(props->has_node_id);
/* force board to initialize possible_cpus if it hasn't been done yet */
mc->possible_cpu_arch_ids(machine);
for (i = 0; i < machine->possible_cpus->len; i++) {
CPUArchId *slot = &machine->possible_cpus->cpus[i];
/* reject unsupported by board properties */
if (props->has_thread_id && !slot->props.has_thread_id) {
error_setg(errp, "thread-id is not supported");
return;
}
if (props->has_core_id && !slot->props.has_core_id) {
error_setg(errp, "core-id is not supported");
return;
}
if (props->has_cluster_id && !slot->props.has_cluster_id) {
error_setg(errp, "cluster-id is not supported");
return;
}
if (props->has_socket_id && !slot->props.has_socket_id) {
error_setg(errp, "socket-id is not supported");
return;
}
if (props->has_die_id && !slot->props.has_die_id) {
error_setg(errp, "die-id is not supported");
return;
}
/* skip slots with explicit mismatch */
if (props->has_thread_id && props->thread_id != slot->props.thread_id) {
continue;
}
if (props->has_core_id && props->core_id != slot->props.core_id) {
continue;
}
if (props->has_cluster_id &&
props->cluster_id != slot->props.cluster_id) {
continue;
}
if (props->has_die_id && props->die_id != slot->props.die_id) {
continue;
}
if (props->has_socket_id && props->socket_id != slot->props.socket_id) {
continue;
}
/* reject assignment if slot is already assigned, for compatibility
* of legacy cpu_index mapping with SPAPR core based mapping do not
* error out if cpu thread and matched core have the same node-id */
if (slot->props.has_node_id &&
slot->props.node_id != props->node_id) {
error_setg(errp, "CPU is already assigned to node-id: %" PRId64,
slot->props.node_id);
return;
}
/* assign slot to node as it's matched '-numa cpu' key */
match = true;
slot->props.node_id = props->node_id;
slot->props.has_node_id = props->has_node_id;
if (machine->numa_state->hmat_enabled) {
if ((numa_info[props->node_id].initiator < MAX_NODES) &&
(props->node_id != numa_info[props->node_id].initiator)) {
error_setg(errp, "The initiator of CPU NUMA node %" PRId64
" should be itself (got %" PRIu16 ")",
props->node_id, numa_info[props->node_id].initiator);
return;
}
numa_info[props->node_id].has_cpu = true;
numa_info[props->node_id].initiator = props->node_id;
}
}
if (!match) {
error_setg(errp, "no match found");
}
}
static void machine_get_smp(Object *obj, Visitor *v, const char *name,
void *opaque, Error **errp)
{
MachineState *ms = MACHINE(obj);
SMPConfiguration *config = &(SMPConfiguration){
.has_cpus = true, .cpus = ms->smp.cpus,
.has_sockets = true, .sockets = ms->smp.sockets,
.has_dies = true, .dies = ms->smp.dies,
hw/core/machine: Introduce CPU cluster topology support The new Cluster-Aware Scheduling support has landed in Linux 5.16, which has been proved to benefit the scheduling performance (e.g. load balance and wake_affine strategy) on both x86_64 and AArch64. So now in Linux 5.16 we have four-level arch-neutral CPU topology definition like below and a new scheduler level for clusters. struct cpu_topology { int thread_id; int core_id; int cluster_id; int package_id; int llc_id; cpumask_t thread_sibling; cpumask_t core_sibling; cpumask_t cluster_sibling; cpumask_t llc_sibling; } A cluster generally means a group of CPU cores which share L2 cache or other mid-level resources, and it is the shared resources that is used to improve scheduler's behavior. From the point of view of the size range, it's between CPU die and CPU core. For example, on some ARM64 Kunpeng servers, we have 6 clusters in each NUMA node, and 4 CPU cores in each cluster. The 4 CPU cores share a separate L2 cache and a L3 cache tag, which brings cache affinity advantage. In virtualization, on the Hosts which have pClusters (physical clusters), if we can design a vCPU topology with cluster level for guest kernel and have a dedicated vCPU pinning. A Cluster-Aware Guest kernel can also make use of the cache affinity of CPU clusters to gain similar scheduling performance. This patch adds infrastructure for CPU cluster level topology configuration and parsing, so that the user can specify cluster parameter if their machines support it. Signed-off-by: Yanan Wang <wangyanan55@huawei.com> Message-Id: <20211228092221.21068-3-wangyanan55@huawei.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> [PMD: Added '(since 7.0)' to @clusters in qapi/machine.json] Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2021-12-28 10:22:09 +01:00
.has_clusters = true, .clusters = ms->smp.clusters,
.has_cores = true, .cores = ms->smp.cores,
.has_threads = true, .threads = ms->smp.threads,
.has_maxcpus = true, .maxcpus = ms->smp.max_cpus,
};
hw/core/machine: Introduce CPU cluster topology support The new Cluster-Aware Scheduling support has landed in Linux 5.16, which has been proved to benefit the scheduling performance (e.g. load balance and wake_affine strategy) on both x86_64 and AArch64. So now in Linux 5.16 we have four-level arch-neutral CPU topology definition like below and a new scheduler level for clusters. struct cpu_topology { int thread_id; int core_id; int cluster_id; int package_id; int llc_id; cpumask_t thread_sibling; cpumask_t core_sibling; cpumask_t cluster_sibling; cpumask_t llc_sibling; } A cluster generally means a group of CPU cores which share L2 cache or other mid-level resources, and it is the shared resources that is used to improve scheduler's behavior. From the point of view of the size range, it's between CPU die and CPU core. For example, on some ARM64 Kunpeng servers, we have 6 clusters in each NUMA node, and 4 CPU cores in each cluster. The 4 CPU cores share a separate L2 cache and a L3 cache tag, which brings cache affinity advantage. In virtualization, on the Hosts which have pClusters (physical clusters), if we can design a vCPU topology with cluster level for guest kernel and have a dedicated vCPU pinning. A Cluster-Aware Guest kernel can also make use of the cache affinity of CPU clusters to gain similar scheduling performance. This patch adds infrastructure for CPU cluster level topology configuration and parsing, so that the user can specify cluster parameter if their machines support it. Signed-off-by: Yanan Wang <wangyanan55@huawei.com> Message-Id: <20211228092221.21068-3-wangyanan55@huawei.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> [PMD: Added '(since 7.0)' to @clusters in qapi/machine.json] Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2021-12-28 10:22:09 +01:00
if (!visit_type_SMPConfiguration(v, name, &config, &error_abort)) {
return;
}
}
static void machine_set_smp(Object *obj, Visitor *v, const char *name,
void *opaque, Error **errp)
{
MachineState *ms = MACHINE(obj);
g_autoptr(SMPConfiguration) config = NULL;
if (!visit_type_SMPConfiguration(v, name, &config, errp)) {
return;
}
machine_parse_smp_config(ms, config, errp);
}
static void machine_get_boot(Object *obj, Visitor *v, const char *name,
void *opaque, Error **errp)
{
MachineState *ms = MACHINE(obj);
BootConfiguration *config = &ms->boot_config;
visit_type_BootConfiguration(v, name, &config, &error_abort);
}
static void machine_free_boot_config(MachineState *ms)
{
g_free(ms->boot_config.order);
g_free(ms->boot_config.once);
g_free(ms->boot_config.splash);
}
static void machine_copy_boot_config(MachineState *ms, BootConfiguration *config)
{
MachineClass *machine_class = MACHINE_GET_CLASS(ms);
machine_free_boot_config(ms);
ms->boot_config = *config;
if (!config->has_order) {
ms->boot_config.has_order = true;
ms->boot_config.order = g_strdup(machine_class->default_boot_order);
}
}
static void machine_set_boot(Object *obj, Visitor *v, const char *name,
void *opaque, Error **errp)
{
ERRP_GUARD();
MachineState *ms = MACHINE(obj);
BootConfiguration *config = NULL;
if (!visit_type_BootConfiguration(v, name, &config, errp)) {
return;
}
if (config->has_order) {
validate_bootdevices(config->order, errp);
if (*errp) {
goto out_free;
}
}
if (config->has_once) {
validate_bootdevices(config->once, errp);
if (*errp) {
goto out_free;
}
}
machine_copy_boot_config(ms, config);
/* Strings live in ms->boot_config. */
free(config);
return;
out_free:
qapi_free_BootConfiguration(config);
}
static void machine_class_init(ObjectClass *oc, void *data)
{
MachineClass *mc = MACHINE_CLASS(oc);
/* Default 128 MB as guest ram size */
mc->default_ram_size = 128 * MiB;
mc->rom_file_has_mr = true;
/* numa node memory size aligned on 8MB by default.
* On Linux, each node's border has to be 8MB aligned
*/
mc->numa_mem_align_shift = 23;
object_class_property_add_str(oc, "kernel",
qom: Drop parameter @errp of object_property_add() & friends The only way object_property_add() can fail is when a property with the same name already exists. Since our property names are all hardcoded, failure is a programming error, and the appropriate way to handle it is passing &error_abort. Same for its variants, except for object_property_add_child(), which additionally fails when the child already has a parent. Parentage is also under program control, so this is a programming error, too. We have a bit over 500 callers. Almost half of them pass &error_abort, slightly fewer ignore errors, one test case handles errors, and the remaining few callers pass them to their own callers. The previous few commits demonstrated once again that ignoring programming errors is a bad idea. Of the few ones that pass on errors, several violate the Error API. The Error ** argument must be NULL, &error_abort, &error_fatal, or a pointer to a variable containing NULL. Passing an argument of the latter kind twice without clearing it in between is wrong: if the first call sets an error, it no longer points to NULL for the second call. ich9_pm_add_properties(), sparc32_ledma_realize(), sparc32_dma_realize(), xilinx_axidma_realize(), xilinx_enet_realize() are wrong that way. When the one appropriate choice of argument is &error_abort, letting users pick the argument is a bad idea. Drop parameter @errp and assert the preconditions instead. There's one exception to "duplicate property name is a programming error": the way object_property_add() implements the magic (and undocumented) "automatic arrayification". Don't drop @errp there. Instead, rename object_property_add() to object_property_try_add(), and add the obvious wrapper object_property_add(). Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20200505152926.18877-15-armbru@redhat.com> [Two semantic rebase conflicts resolved]
2020-05-05 17:29:22 +02:00
machine_get_kernel, machine_set_kernel);
object_class_property_set_description(oc, "kernel",
"Linux kernel image file");
object_class_property_add_str(oc, "initrd",
qom: Drop parameter @errp of object_property_add() & friends The only way object_property_add() can fail is when a property with the same name already exists. Since our property names are all hardcoded, failure is a programming error, and the appropriate way to handle it is passing &error_abort. Same for its variants, except for object_property_add_child(), which additionally fails when the child already has a parent. Parentage is also under program control, so this is a programming error, too. We have a bit over 500 callers. Almost half of them pass &error_abort, slightly fewer ignore errors, one test case handles errors, and the remaining few callers pass them to their own callers. The previous few commits demonstrated once again that ignoring programming errors is a bad idea. Of the few ones that pass on errors, several violate the Error API. The Error ** argument must be NULL, &error_abort, &error_fatal, or a pointer to a variable containing NULL. Passing an argument of the latter kind twice without clearing it in between is wrong: if the first call sets an error, it no longer points to NULL for the second call. ich9_pm_add_properties(), sparc32_ledma_realize(), sparc32_dma_realize(), xilinx_axidma_realize(), xilinx_enet_realize() are wrong that way. When the one appropriate choice of argument is &error_abort, letting users pick the argument is a bad idea. Drop parameter @errp and assert the preconditions instead. There's one exception to "duplicate property name is a programming error": the way object_property_add() implements the magic (and undocumented) "automatic arrayification". Don't drop @errp there. Instead, rename object_property_add() to object_property_try_add(), and add the obvious wrapper object_property_add(). Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20200505152926.18877-15-armbru@redhat.com> [Two semantic rebase conflicts resolved]
2020-05-05 17:29:22 +02:00
machine_get_initrd, machine_set_initrd);
object_class_property_set_description(oc, "initrd",
"Linux initial ramdisk file");
object_class_property_add_str(oc, "append",
qom: Drop parameter @errp of object_property_add() & friends The only way object_property_add() can fail is when a property with the same name already exists. Since our property names are all hardcoded, failure is a programming error, and the appropriate way to handle it is passing &error_abort. Same for its variants, except for object_property_add_child(), which additionally fails when the child already has a parent. Parentage is also under program control, so this is a programming error, too. We have a bit over 500 callers. Almost half of them pass &error_abort, slightly fewer ignore errors, one test case handles errors, and the remaining few callers pass them to their own callers. The previous few commits demonstrated once again that ignoring programming errors is a bad idea. Of the few ones that pass on errors, several violate the Error API. The Error ** argument must be NULL, &error_abort, &error_fatal, or a pointer to a variable containing NULL. Passing an argument of the latter kind twice without clearing it in between is wrong: if the first call sets an error, it no longer points to NULL for the second call. ich9_pm_add_properties(), sparc32_ledma_realize(), sparc32_dma_realize(), xilinx_axidma_realize(), xilinx_enet_realize() are wrong that way. When the one appropriate choice of argument is &error_abort, letting users pick the argument is a bad idea. Drop parameter @errp and assert the preconditions instead. There's one exception to "duplicate property name is a programming error": the way object_property_add() implements the magic (and undocumented) "automatic arrayification". Don't drop @errp there. Instead, rename object_property_add() to object_property_try_add(), and add the obvious wrapper object_property_add(). Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20200505152926.18877-15-armbru@redhat.com> [Two semantic rebase conflicts resolved]
2020-05-05 17:29:22 +02:00
machine_get_append, machine_set_append);
object_class_property_set_description(oc, "append",
"Linux kernel command line");
object_class_property_add_str(oc, "dtb",
qom: Drop parameter @errp of object_property_add() & friends The only way object_property_add() can fail is when a property with the same name already exists. Since our property names are all hardcoded, failure is a programming error, and the appropriate way to handle it is passing &error_abort. Same for its variants, except for object_property_add_child(), which additionally fails when the child already has a parent. Parentage is also under program control, so this is a programming error, too. We have a bit over 500 callers. Almost half of them pass &error_abort, slightly fewer ignore errors, one test case handles errors, and the remaining few callers pass them to their own callers. The previous few commits demonstrated once again that ignoring programming errors is a bad idea. Of the few ones that pass on errors, several violate the Error API. The Error ** argument must be NULL, &error_abort, &error_fatal, or a pointer to a variable containing NULL. Passing an argument of the latter kind twice without clearing it in between is wrong: if the first call sets an error, it no longer points to NULL for the second call. ich9_pm_add_properties(), sparc32_ledma_realize(), sparc32_dma_realize(), xilinx_axidma_realize(), xilinx_enet_realize() are wrong that way. When the one appropriate choice of argument is &error_abort, letting users pick the argument is a bad idea. Drop parameter @errp and assert the preconditions instead. There's one exception to "duplicate property name is a programming error": the way object_property_add() implements the magic (and undocumented) "automatic arrayification". Don't drop @errp there. Instead, rename object_property_add() to object_property_try_add(), and add the obvious wrapper object_property_add(). Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20200505152926.18877-15-armbru@redhat.com> [Two semantic rebase conflicts resolved]
2020-05-05 17:29:22 +02:00
machine_get_dtb, machine_set_dtb);
object_class_property_set_description(oc, "dtb",
"Linux kernel device tree file");
object_class_property_add_str(oc, "dumpdtb",
qom: Drop parameter @errp of object_property_add() & friends The only way object_property_add() can fail is when a property with the same name already exists. Since our property names are all hardcoded, failure is a programming error, and the appropriate way to handle it is passing &error_abort. Same for its variants, except for object_property_add_child(), which additionally fails when the child already has a parent. Parentage is also under program control, so this is a programming error, too. We have a bit over 500 callers. Almost half of them pass &error_abort, slightly fewer ignore errors, one test case handles errors, and the remaining few callers pass them to their own callers. The previous few commits demonstrated once again that ignoring programming errors is a bad idea. Of the few ones that pass on errors, several violate the Error API. The Error ** argument must be NULL, &error_abort, &error_fatal, or a pointer to a variable containing NULL. Passing an argument of the latter kind twice without clearing it in between is wrong: if the first call sets an error, it no longer points to NULL for the second call. ich9_pm_add_properties(), sparc32_ledma_realize(), sparc32_dma_realize(), xilinx_axidma_realize(), xilinx_enet_realize() are wrong that way. When the one appropriate choice of argument is &error_abort, letting users pick the argument is a bad idea. Drop parameter @errp and assert the preconditions instead. There's one exception to "duplicate property name is a programming error": the way object_property_add() implements the magic (and undocumented) "automatic arrayification". Don't drop @errp there. Instead, rename object_property_add() to object_property_try_add(), and add the obvious wrapper object_property_add(). Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20200505152926.18877-15-armbru@redhat.com> [Two semantic rebase conflicts resolved]
2020-05-05 17:29:22 +02:00
machine_get_dumpdtb, machine_set_dumpdtb);
object_class_property_set_description(oc, "dumpdtb",
"Dump current dtb to a file and quit");
object_class_property_add(oc, "boot", "BootConfiguration",
machine_get_boot, machine_set_boot,
NULL, NULL);
object_class_property_set_description(oc, "boot",
"Boot configuration");
object_class_property_add(oc, "smp", "SMPConfiguration",
machine_get_smp, machine_set_smp,
NULL, NULL);
object_class_property_set_description(oc, "smp",
"CPU topology");
object_class_property_add(oc, "phandle-start", "int",
machine_get_phandle_start, machine_set_phandle_start,
qom: Drop parameter @errp of object_property_add() & friends The only way object_property_add() can fail is when a property with the same name already exists. Since our property names are all hardcoded, failure is a programming error, and the appropriate way to handle it is passing &error_abort. Same for its variants, except for object_property_add_child(), which additionally fails when the child already has a parent. Parentage is also under program control, so this is a programming error, too. We have a bit over 500 callers. Almost half of them pass &error_abort, slightly fewer ignore errors, one test case handles errors, and the remaining few callers pass them to their own callers. The previous few commits demonstrated once again that ignoring programming errors is a bad idea. Of the few ones that pass on errors, several violate the Error API. The Error ** argument must be NULL, &error_abort, &error_fatal, or a pointer to a variable containing NULL. Passing an argument of the latter kind twice without clearing it in between is wrong: if the first call sets an error, it no longer points to NULL for the second call. ich9_pm_add_properties(), sparc32_ledma_realize(), sparc32_dma_realize(), xilinx_axidma_realize(), xilinx_enet_realize() are wrong that way. When the one appropriate choice of argument is &error_abort, letting users pick the argument is a bad idea. Drop parameter @errp and assert the preconditions instead. There's one exception to "duplicate property name is a programming error": the way object_property_add() implements the magic (and undocumented) "automatic arrayification". Don't drop @errp there. Instead, rename object_property_add() to object_property_try_add(), and add the obvious wrapper object_property_add(). Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20200505152926.18877-15-armbru@redhat.com> [Two semantic rebase conflicts resolved]
2020-05-05 17:29:22 +02:00
NULL, NULL);
object_class_property_set_description(oc, "phandle-start",
"The first phandle ID we may generate dynamically");
object_class_property_add_str(oc, "dt-compatible",
qom: Drop parameter @errp of object_property_add() & friends The only way object_property_add() can fail is when a property with the same name already exists. Since our property names are all hardcoded, failure is a programming error, and the appropriate way to handle it is passing &error_abort. Same for its variants, except for object_property_add_child(), which additionally fails when the child already has a parent. Parentage is also under program control, so this is a programming error, too. We have a bit over 500 callers. Almost half of them pass &error_abort, slightly fewer ignore errors, one test case handles errors, and the remaining few callers pass them to their own callers. The previous few commits demonstrated once again that ignoring programming errors is a bad idea. Of the few ones that pass on errors, several violate the Error API. The Error ** argument must be NULL, &error_abort, &error_fatal, or a pointer to a variable containing NULL. Passing an argument of the latter kind twice without clearing it in between is wrong: if the first call sets an error, it no longer points to NULL for the second call. ich9_pm_add_properties(), sparc32_ledma_realize(), sparc32_dma_realize(), xilinx_axidma_realize(), xilinx_enet_realize() are wrong that way. When the one appropriate choice of argument is &error_abort, letting users pick the argument is a bad idea. Drop parameter @errp and assert the preconditions instead. There's one exception to "duplicate property name is a programming error": the way object_property_add() implements the magic (and undocumented) "automatic arrayification". Don't drop @errp there. Instead, rename object_property_add() to object_property_try_add(), and add the obvious wrapper object_property_add(). Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20200505152926.18877-15-armbru@redhat.com> [Two semantic rebase conflicts resolved]
2020-05-05 17:29:22 +02:00
machine_get_dt_compatible, machine_set_dt_compatible);
object_class_property_set_description(oc, "dt-compatible",
"Overrides the \"compatible\" property of the dt root node");
object_class_property_add_bool(oc, "dump-guest-core",
qom: Drop parameter @errp of object_property_add() & friends The only way object_property_add() can fail is when a property with the same name already exists. Since our property names are all hardcoded, failure is a programming error, and the appropriate way to handle it is passing &error_abort. Same for its variants, except for object_property_add_child(), which additionally fails when the child already has a parent. Parentage is also under program control, so this is a programming error, too. We have a bit over 500 callers. Almost half of them pass &error_abort, slightly fewer ignore errors, one test case handles errors, and the remaining few callers pass them to their own callers. The previous few commits demonstrated once again that ignoring programming errors is a bad idea. Of the few ones that pass on errors, several violate the Error API. The Error ** argument must be NULL, &error_abort, &error_fatal, or a pointer to a variable containing NULL. Passing an argument of the latter kind twice without clearing it in between is wrong: if the first call sets an error, it no longer points to NULL for the second call. ich9_pm_add_properties(), sparc32_ledma_realize(), sparc32_dma_realize(), xilinx_axidma_realize(), xilinx_enet_realize() are wrong that way. When the one appropriate choice of argument is &error_abort, letting users pick the argument is a bad idea. Drop parameter @errp and assert the preconditions instead. There's one exception to "duplicate property name is a programming error": the way object_property_add() implements the magic (and undocumented) "automatic arrayification". Don't drop @errp there. Instead, rename object_property_add() to object_property_try_add(), and add the obvious wrapper object_property_add(). Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20200505152926.18877-15-armbru@redhat.com> [Two semantic rebase conflicts resolved]
2020-05-05 17:29:22 +02:00
machine_get_dump_guest_core, machine_set_dump_guest_core);
object_class_property_set_description(oc, "dump-guest-core",
"Include guest memory in a core dump");
object_class_property_add_bool(oc, "mem-merge",
qom: Drop parameter @errp of object_property_add() & friends The only way object_property_add() can fail is when a property with the same name already exists. Since our property names are all hardcoded, failure is a programming error, and the appropriate way to handle it is passing &error_abort. Same for its variants, except for object_property_add_child(), which additionally fails when the child already has a parent. Parentage is also under program control, so this is a programming error, too. We have a bit over 500 callers. Almost half of them pass &error_abort, slightly fewer ignore errors, one test case handles errors, and the remaining few callers pass them to their own callers. The previous few commits demonstrated once again that ignoring programming errors is a bad idea. Of the few ones that pass on errors, several violate the Error API. The Error ** argument must be NULL, &error_abort, &error_fatal, or a pointer to a variable containing NULL. Passing an argument of the latter kind twice without clearing it in between is wrong: if the first call sets an error, it no longer points to NULL for the second call. ich9_pm_add_properties(), sparc32_ledma_realize(), sparc32_dma_realize(), xilinx_axidma_realize(), xilinx_enet_realize() are wrong that way. When the one appropriate choice of argument is &error_abort, letting users pick the argument is a bad idea. Drop parameter @errp and assert the preconditions instead. There's one exception to "duplicate property name is a programming error": the way object_property_add() implements the magic (and undocumented) "automatic arrayification". Don't drop @errp there. Instead, rename object_property_add() to object_property_try_add(), and add the obvious wrapper object_property_add(). Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20200505152926.18877-15-armbru@redhat.com> [Two semantic rebase conflicts resolved]
2020-05-05 17:29:22 +02:00
machine_get_mem_merge, machine_set_mem_merge);
object_class_property_set_description(oc, "mem-merge",
"Enable/disable memory merge support");
object_class_property_add_bool(oc, "usb",
qom: Drop parameter @errp of object_property_add() & friends The only way object_property_add() can fail is when a property with the same name already exists. Since our property names are all hardcoded, failure is a programming error, and the appropriate way to handle it is passing &error_abort. Same for its variants, except for object_property_add_child(), which additionally fails when the child already has a parent. Parentage is also under program control, so this is a programming error, too. We have a bit over 500 callers. Almost half of them pass &error_abort, slightly fewer ignore errors, one test case handles errors, and the remaining few callers pass them to their own callers. The previous few commits demonstrated once again that ignoring programming errors is a bad idea. Of the few ones that pass on errors, several violate the Error API. The Error ** argument must be NULL, &error_abort, &error_fatal, or a pointer to a variable containing NULL. Passing an argument of the latter kind twice without clearing it in between is wrong: if the first call sets an error, it no longer points to NULL for the second call. ich9_pm_add_properties(), sparc32_ledma_realize(), sparc32_dma_realize(), xilinx_axidma_realize(), xilinx_enet_realize() are wrong that way. When the one appropriate choice of argument is &error_abort, letting users pick the argument is a bad idea. Drop parameter @errp and assert the preconditions instead. There's one exception to "duplicate property name is a programming error": the way object_property_add() implements the magic (and undocumented) "automatic arrayification". Don't drop @errp there. Instead, rename object_property_add() to object_property_try_add(), and add the obvious wrapper object_property_add(). Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20200505152926.18877-15-armbru@redhat.com> [Two semantic rebase conflicts resolved]
2020-05-05 17:29:22 +02:00
machine_get_usb, machine_set_usb);
object_class_property_set_description(oc, "usb",
"Set on/off to enable/disable usb");
object_class_property_add_bool(oc, "graphics",
qom: Drop parameter @errp of object_property_add() & friends The only way object_property_add() can fail is when a property with the same name already exists. Since our property names are all hardcoded, failure is a programming error, and the appropriate way to handle it is passing &error_abort. Same for its variants, except for object_property_add_child(), which additionally fails when the child already has a parent. Parentage is also under program control, so this is a programming error, too. We have a bit over 500 callers. Almost half of them pass &error_abort, slightly fewer ignore errors, one test case handles errors, and the remaining few callers pass them to their own callers. The previous few commits demonstrated once again that ignoring programming errors is a bad idea. Of the few ones that pass on errors, several violate the Error API. The Error ** argument must be NULL, &error_abort, &error_fatal, or a pointer to a variable containing NULL. Passing an argument of the latter kind twice without clearing it in between is wrong: if the first call sets an error, it no longer points to NULL for the second call. ich9_pm_add_properties(), sparc32_ledma_realize(), sparc32_dma_realize(), xilinx_axidma_realize(), xilinx_enet_realize() are wrong that way. When the one appropriate choice of argument is &error_abort, letting users pick the argument is a bad idea. Drop parameter @errp and assert the preconditions instead. There's one exception to "duplicate property name is a programming error": the way object_property_add() implements the magic (and undocumented) "automatic arrayification". Don't drop @errp there. Instead, rename object_property_add() to object_property_try_add(), and add the obvious wrapper object_property_add(). Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20200505152926.18877-15-armbru@redhat.com> [Two semantic rebase conflicts resolved]
2020-05-05 17:29:22 +02:00
machine_get_graphics, machine_set_graphics);
object_class_property_set_description(oc, "graphics",
"Set on/off to enable/disable graphics emulation");
object_class_property_add_str(oc, "firmware",
qom: Drop parameter @errp of object_property_add() & friends The only way object_property_add() can fail is when a property with the same name already exists. Since our property names are all hardcoded, failure is a programming error, and the appropriate way to handle it is passing &error_abort. Same for its variants, except for object_property_add_child(), which additionally fails when the child already has a parent. Parentage is also under program control, so this is a programming error, too. We have a bit over 500 callers. Almost half of them pass &error_abort, slightly fewer ignore errors, one test case handles errors, and the remaining few callers pass them to their own callers. The previous few commits demonstrated once again that ignoring programming errors is a bad idea. Of the few ones that pass on errors, several violate the Error API. The Error ** argument must be NULL, &error_abort, &error_fatal, or a pointer to a variable containing NULL. Passing an argument of the latter kind twice without clearing it in between is wrong: if the first call sets an error, it no longer points to NULL for the second call. ich9_pm_add_properties(), sparc32_ledma_realize(), sparc32_dma_realize(), xilinx_axidma_realize(), xilinx_enet_realize() are wrong that way. When the one appropriate choice of argument is &error_abort, letting users pick the argument is a bad idea. Drop parameter @errp and assert the preconditions instead. There's one exception to "duplicate property name is a programming error": the way object_property_add() implements the magic (and undocumented) "automatic arrayification". Don't drop @errp there. Instead, rename object_property_add() to object_property_try_add(), and add the obvious wrapper object_property_add(). Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20200505152926.18877-15-armbru@redhat.com> [Two semantic rebase conflicts resolved]
2020-05-05 17:29:22 +02:00
machine_get_firmware, machine_set_firmware);
object_class_property_set_description(oc, "firmware",
"Firmware image");
object_class_property_add_bool(oc, "suppress-vmdesc",
qom: Drop parameter @errp of object_property_add() & friends The only way object_property_add() can fail is when a property with the same name already exists. Since our property names are all hardcoded, failure is a programming error, and the appropriate way to handle it is passing &error_abort. Same for its variants, except for object_property_add_child(), which additionally fails when the child already has a parent. Parentage is also under program control, so this is a programming error, too. We have a bit over 500 callers. Almost half of them pass &error_abort, slightly fewer ignore errors, one test case handles errors, and the remaining few callers pass them to their own callers. The previous few commits demonstrated once again that ignoring programming errors is a bad idea. Of the few ones that pass on errors, several violate the Error API. The Error ** argument must be NULL, &error_abort, &error_fatal, or a pointer to a variable containing NULL. Passing an argument of the latter kind twice without clearing it in between is wrong: if the first call sets an error, it no longer points to NULL for the second call. ich9_pm_add_properties(), sparc32_ledma_realize(), sparc32_dma_realize(), xilinx_axidma_realize(), xilinx_enet_realize() are wrong that way. When the one appropriate choice of argument is &error_abort, letting users pick the argument is a bad idea. Drop parameter @errp and assert the preconditions instead. There's one exception to "duplicate property name is a programming error": the way object_property_add() implements the magic (and undocumented) "automatic arrayification". Don't drop @errp there. Instead, rename object_property_add() to object_property_try_add(), and add the obvious wrapper object_property_add(). Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20200505152926.18877-15-armbru@redhat.com> [Two semantic rebase conflicts resolved]
2020-05-05 17:29:22 +02:00
machine_get_suppress_vmdesc, machine_set_suppress_vmdesc);
object_class_property_set_description(oc, "suppress-vmdesc",
"Set on to disable self-describing migration");
object_class_property_add_link(oc, "confidential-guest-support",
TYPE_CONFIDENTIAL_GUEST_SUPPORT,
offsetof(MachineState, cgs),
machine_check_confidential_guest_support,
OBJ_PROP_LINK_STRONG);
object_class_property_set_description(oc, "confidential-guest-support",
"Set confidential guest scheme to support");
/* For compatibility */
object_class_property_add_str(oc, "memory-encryption",
qom: Drop parameter @errp of object_property_add() & friends The only way object_property_add() can fail is when a property with the same name already exists. Since our property names are all hardcoded, failure is a programming error, and the appropriate way to handle it is passing &error_abort. Same for its variants, except for object_property_add_child(), which additionally fails when the child already has a parent. Parentage is also under program control, so this is a programming error, too. We have a bit over 500 callers. Almost half of them pass &error_abort, slightly fewer ignore errors, one test case handles errors, and the remaining few callers pass them to their own callers. The previous few commits demonstrated once again that ignoring programming errors is a bad idea. Of the few ones that pass on errors, several violate the Error API. The Error ** argument must be NULL, &error_abort, &error_fatal, or a pointer to a variable containing NULL. Passing an argument of the latter kind twice without clearing it in between is wrong: if the first call sets an error, it no longer points to NULL for the second call. ich9_pm_add_properties(), sparc32_ledma_realize(), sparc32_dma_realize(), xilinx_axidma_realize(), xilinx_enet_realize() are wrong that way. When the one appropriate choice of argument is &error_abort, letting users pick the argument is a bad idea. Drop parameter @errp and assert the preconditions instead. There's one exception to "duplicate property name is a programming error": the way object_property_add() implements the magic (and undocumented) "automatic arrayification". Don't drop @errp there. Instead, rename object_property_add() to object_property_try_add(), and add the obvious wrapper object_property_add(). Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20200505152926.18877-15-armbru@redhat.com> [Two semantic rebase conflicts resolved]
2020-05-05 17:29:22 +02:00
machine_get_memory_encryption, machine_set_memory_encryption);
object_class_property_set_description(oc, "memory-encryption",
"Set memory encryption object to use");
object_class_property_add_link(oc, "memory-backend", TYPE_MEMORY_BACKEND,
offsetof(MachineState, memdev), object_property_allow_set_link,
OBJ_PROP_LINK_STRONG);
object_class_property_set_description(oc, "memory-backend",
"Set RAM backend"
"Valid value is ID of hostmem based backend");
object_class_property_add(oc, "memory", "MemorySizeConfiguration",
machine_get_mem, machine_set_mem,
NULL, NULL);
object_class_property_set_description(oc, "memory",
"Memory size configuration");
}
static void machine_class_base_init(ObjectClass *oc, void *data)
{
MachineClass *mc = MACHINE_CLASS(oc);
mc->max_cpus = mc->max_cpus ?: 1;
mc->min_cpus = mc->min_cpus ?: 1;
mc->default_cpus = mc->default_cpus ?: 1;
if (!object_class_is_abstract(oc)) {
const char *cname = object_class_get_name(oc);
assert(g_str_has_suffix(cname, TYPE_MACHINE_SUFFIX));
mc->name = g_strndup(cname,
strlen(cname) - strlen(TYPE_MACHINE_SUFFIX));
mc->compat_props = g_ptr_array_new();
}
}
static void machine_initfn(Object *obj)
{
MachineState *ms = MACHINE(obj);
MachineClass *mc = MACHINE_GET_CLASS(obj);
container_get(obj, "/peripheral");
container_get(obj, "/peripheral-anon");
ms->dump_guest_core = true;
ms->mem_merge = true;
ms->enable_graphics = true;
ms->kernel_cmdline = g_strdup("");
ms->ram_size = mc->default_ram_size;
ms->maxram_size = mc->default_ram_size;
if (mc->nvdimm_supported) {
Object *obj = OBJECT(ms);
ms->nvdimms_state = g_new0(NVDIMMState, 1);
object_property_add_bool(obj, "nvdimm",
qom: Drop parameter @errp of object_property_add() & friends The only way object_property_add() can fail is when a property with the same name already exists. Since our property names are all hardcoded, failure is a programming error, and the appropriate way to handle it is passing &error_abort. Same for its variants, except for object_property_add_child(), which additionally fails when the child already has a parent. Parentage is also under program control, so this is a programming error, too. We have a bit over 500 callers. Almost half of them pass &error_abort, slightly fewer ignore errors, one test case handles errors, and the remaining few callers pass them to their own callers. The previous few commits demonstrated once again that ignoring programming errors is a bad idea. Of the few ones that pass on errors, several violate the Error API. The Error ** argument must be NULL, &error_abort, &error_fatal, or a pointer to a variable containing NULL. Passing an argument of the latter kind twice without clearing it in between is wrong: if the first call sets an error, it no longer points to NULL for the second call. ich9_pm_add_properties(), sparc32_ledma_realize(), sparc32_dma_realize(), xilinx_axidma_realize(), xilinx_enet_realize() are wrong that way. When the one appropriate choice of argument is &error_abort, letting users pick the argument is a bad idea. Drop parameter @errp and assert the preconditions instead. There's one exception to "duplicate property name is a programming error": the way object_property_add() implements the magic (and undocumented) "automatic arrayification". Don't drop @errp there. Instead, rename object_property_add() to object_property_try_add(), and add the obvious wrapper object_property_add(). Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20200505152926.18877-15-armbru@redhat.com> [Two semantic rebase conflicts resolved]
2020-05-05 17:29:22 +02:00
machine_get_nvdimm, machine_set_nvdimm);
object_property_set_description(obj, "nvdimm",
"Set on/off to enable/disable "
"NVDIMM instantiation");
object_property_add_str(obj, "nvdimm-persistence",
machine_get_nvdimm_persistence,
qom: Drop parameter @errp of object_property_add() & friends The only way object_property_add() can fail is when a property with the same name already exists. Since our property names are all hardcoded, failure is a programming error, and the appropriate way to handle it is passing &error_abort. Same for its variants, except for object_property_add_child(), which additionally fails when the child already has a parent. Parentage is also under program control, so this is a programming error, too. We have a bit over 500 callers. Almost half of them pass &error_abort, slightly fewer ignore errors, one test case handles errors, and the remaining few callers pass them to their own callers. The previous few commits demonstrated once again that ignoring programming errors is a bad idea. Of the few ones that pass on errors, several violate the Error API. The Error ** argument must be NULL, &error_abort, &error_fatal, or a pointer to a variable containing NULL. Passing an argument of the latter kind twice without clearing it in between is wrong: if the first call sets an error, it no longer points to NULL for the second call. ich9_pm_add_properties(), sparc32_ledma_realize(), sparc32_dma_realize(), xilinx_axidma_realize(), xilinx_enet_realize() are wrong that way. When the one appropriate choice of argument is &error_abort, letting users pick the argument is a bad idea. Drop parameter @errp and assert the preconditions instead. There's one exception to "duplicate property name is a programming error": the way object_property_add() implements the magic (and undocumented) "automatic arrayification". Don't drop @errp there. Instead, rename object_property_add() to object_property_try_add(), and add the obvious wrapper object_property_add(). Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20200505152926.18877-15-armbru@redhat.com> [Two semantic rebase conflicts resolved]
2020-05-05 17:29:22 +02:00
machine_set_nvdimm_persistence);
object_property_set_description(obj, "nvdimm-persistence",
"Set NVDIMM persistence"
"Valid values are cpu, mem-ctrl");
}
if (mc->cpu_index_to_instance_props && mc->get_default_cpu_node_id) {
ms->numa_state = g_new0(NumaState, 1);
object_property_add_bool(obj, "hmat",
qom: Drop parameter @errp of object_property_add() & friends The only way object_property_add() can fail is when a property with the same name already exists. Since our property names are all hardcoded, failure is a programming error, and the appropriate way to handle it is passing &error_abort. Same for its variants, except for object_property_add_child(), which additionally fails when the child already has a parent. Parentage is also under program control, so this is a programming error, too. We have a bit over 500 callers. Almost half of them pass &error_abort, slightly fewer ignore errors, one test case handles errors, and the remaining few callers pass them to their own callers. The previous few commits demonstrated once again that ignoring programming errors is a bad idea. Of the few ones that pass on errors, several violate the Error API. The Error ** argument must be NULL, &error_abort, &error_fatal, or a pointer to a variable containing NULL. Passing an argument of the latter kind twice without clearing it in between is wrong: if the first call sets an error, it no longer points to NULL for the second call. ich9_pm_add_properties(), sparc32_ledma_realize(), sparc32_dma_realize(), xilinx_axidma_realize(), xilinx_enet_realize() are wrong that way. When the one appropriate choice of argument is &error_abort, letting users pick the argument is a bad idea. Drop parameter @errp and assert the preconditions instead. There's one exception to "duplicate property name is a programming error": the way object_property_add() implements the magic (and undocumented) "automatic arrayification". Don't drop @errp there. Instead, rename object_property_add() to object_property_try_add(), and add the obvious wrapper object_property_add(). Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20200505152926.18877-15-armbru@redhat.com> [Two semantic rebase conflicts resolved]
2020-05-05 17:29:22 +02:00
machine_get_hmat, machine_set_hmat);
object_property_set_description(obj, "hmat",
"Set on/off to enable/disable "
"ACPI Heterogeneous Memory Attribute "
"Table (HMAT)");
}
/* default to mc->default_cpus */
ms->smp.cpus = mc->default_cpus;
ms->smp.max_cpus = mc->default_cpus;
ms->smp.sockets = 1;
ms->smp.dies = 1;
hw/core/machine: Introduce CPU cluster topology support The new Cluster-Aware Scheduling support has landed in Linux 5.16, which has been proved to benefit the scheduling performance (e.g. load balance and wake_affine strategy) on both x86_64 and AArch64. So now in Linux 5.16 we have four-level arch-neutral CPU topology definition like below and a new scheduler level for clusters. struct cpu_topology { int thread_id; int core_id; int cluster_id; int package_id; int llc_id; cpumask_t thread_sibling; cpumask_t core_sibling; cpumask_t cluster_sibling; cpumask_t llc_sibling; } A cluster generally means a group of CPU cores which share L2 cache or other mid-level resources, and it is the shared resources that is used to improve scheduler's behavior. From the point of view of the size range, it's between CPU die and CPU core. For example, on some ARM64 Kunpeng servers, we have 6 clusters in each NUMA node, and 4 CPU cores in each cluster. The 4 CPU cores share a separate L2 cache and a L3 cache tag, which brings cache affinity advantage. In virtualization, on the Hosts which have pClusters (physical clusters), if we can design a vCPU topology with cluster level for guest kernel and have a dedicated vCPU pinning. A Cluster-Aware Guest kernel can also make use of the cache affinity of CPU clusters to gain similar scheduling performance. This patch adds infrastructure for CPU cluster level topology configuration and parsing, so that the user can specify cluster parameter if their machines support it. Signed-off-by: Yanan Wang <wangyanan55@huawei.com> Message-Id: <20211228092221.21068-3-wangyanan55@huawei.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> [PMD: Added '(since 7.0)' to @clusters in qapi/machine.json] Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2021-12-28 10:22:09 +01:00
ms->smp.clusters = 1;
ms->smp.cores = 1;
ms->smp.threads = 1;
machine_copy_boot_config(ms, &(BootConfiguration){ 0 });
}
static void machine_finalize(Object *obj)
{
MachineState *ms = MACHINE(obj);
machine_free_boot_config(ms);
g_free(ms->kernel_filename);
g_free(ms->initrd_filename);
g_free(ms->kernel_cmdline);
g_free(ms->dtb);
g_free(ms->dumpdtb);
g_free(ms->dt_compatible);
g_free(ms->firmware);
g_free(ms->device_memory);
g_free(ms->nvdimms_state);
g_free(ms->numa_state);
}
bool machine_usb(MachineState *machine)
{
return machine->usb;
}
int machine_phandle_start(MachineState *machine)
{
return machine->phandle_start;
}
bool machine_dump_guest_core(MachineState *machine)
{
return machine->dump_guest_core;
}
bool machine_mem_merge(MachineState *machine)
{
return machine->mem_merge;
}
static char *cpu_slot_to_string(const CPUArchId *cpu)
{
GString *s = g_string_new(NULL);
if (cpu->props.has_socket_id) {
g_string_append_printf(s, "socket-id: %"PRId64, cpu->props.socket_id);
}
if (cpu->props.has_die_id) {
if (s->len) {
g_string_append_printf(s, ", ");
}
g_string_append_printf(s, "die-id: %"PRId64, cpu->props.die_id);
}
if (cpu->props.has_cluster_id) {
if (s->len) {
g_string_append_printf(s, ", ");
}
g_string_append_printf(s, "cluster-id: %"PRId64, cpu->props.cluster_id);
}
if (cpu->props.has_core_id) {
if (s->len) {
g_string_append_printf(s, ", ");
}
g_string_append_printf(s, "core-id: %"PRId64, cpu->props.core_id);
}
if (cpu->props.has_thread_id) {
if (s->len) {
g_string_append_printf(s, ", ");
}
g_string_append_printf(s, "thread-id: %"PRId64, cpu->props.thread_id);
}
return g_string_free(s, false);
}
static void numa_validate_initiator(NumaState *numa_state)
{
int i;
NodeInfo *numa_info = numa_state->nodes;
for (i = 0; i < numa_state->num_nodes; i++) {
if (numa_info[i].initiator == MAX_NODES) {
error_report("The initiator of NUMA node %d is missing, use "
"'-numa node,initiator' option to declare it", i);
exit(1);
}
if (!numa_info[numa_info[i].initiator].present) {
error_report("NUMA node %" PRIu16 " is missing, use "
"'-numa node' option to declare it first",
numa_info[i].initiator);
exit(1);
}
if (!numa_info[numa_info[i].initiator].has_cpu) {
error_report("The initiator of NUMA node %d is invalid", i);
exit(1);
}
}
}
static void machine_numa_finish_cpu_init(MachineState *machine)
{
int i;
bool default_mapping;
GString *s = g_string_new(NULL);
MachineClass *mc = MACHINE_GET_CLASS(machine);
const CPUArchIdList *possible_cpus = mc->possible_cpu_arch_ids(machine);
assert(machine->numa_state->num_nodes);
for (i = 0; i < possible_cpus->len; i++) {
if (possible_cpus->cpus[i].props.has_node_id) {
break;
}
}
default_mapping = (i == possible_cpus->len);
for (i = 0; i < possible_cpus->len; i++) {
const CPUArchId *cpu_slot = &possible_cpus->cpus[i];
if (!cpu_slot->props.has_node_id) {
/* fetch default mapping from board and enable it */
CpuInstanceProperties props = cpu_slot->props;
props.node_id = mc->get_default_cpu_node_id(machine, i);
if (!default_mapping) {
/* record slots with not set mapping,
* TODO: make it hard error in future */
char *cpu_str = cpu_slot_to_string(cpu_slot);
g_string_append_printf(s, "%sCPU %d [%s]",
s->len ? ", " : "", i, cpu_str);
g_free(cpu_str);
/* non mapped cpus used to fallback to node 0 */
props.node_id = 0;
}
props.has_node_id = true;
machine_set_cpu_numa_node(machine, &props, &error_fatal);
}
}
if (machine->numa_state->hmat_enabled) {
numa_validate_initiator(machine->numa_state);
}
if (s->len && !qtest_enabled()) {
Convert error_report() to warn_report() Convert all uses of error_report("warning:"... to use warn_report() instead. This helps standardise on a single method of printing warnings to the user. All of the warnings were changed using these two commands: find ./* -type f -exec sed -i \ 's|error_report(".*warning[,:] |warn_report("|Ig' {} + Indentation fixed up manually afterwards. The test-qdev-global-props test case was manually updated to ensure that this patch passes make check (as the test cases are case sensitive). Signed-off-by: Alistair Francis <alistair.francis@xilinx.com> Suggested-by: Thomas Huth <thuth@redhat.com> Cc: Jeff Cody <jcody@redhat.com> Cc: Kevin Wolf <kwolf@redhat.com> Cc: Max Reitz <mreitz@redhat.com> Cc: Ronnie Sahlberg <ronniesahlberg@gmail.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Peter Lieven <pl@kamp.de> Cc: Josh Durgin <jdurgin@redhat.com> Cc: "Richard W.M. Jones" <rjones@redhat.com> Cc: Markus Armbruster <armbru@redhat.com> Cc: Peter Crosthwaite <crosthwaite.peter@gmail.com> Cc: Richard Henderson <rth@twiddle.net> Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com> Cc: Greg Kurz <groug@kaod.org> Cc: Rob Herring <robh@kernel.org> Cc: Peter Maydell <peter.maydell@linaro.org> Cc: Peter Chubb <peter.chubb@nicta.com.au> Cc: Eduardo Habkost <ehabkost@redhat.com> Cc: Marcel Apfelbaum <marcel@redhat.com> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Igor Mammedov <imammedo@redhat.com> Cc: David Gibson <david@gibson.dropbear.id.au> Cc: Alexander Graf <agraf@suse.de> Cc: Gerd Hoffmann <kraxel@redhat.com> Cc: Jason Wang <jasowang@redhat.com> Cc: Marcelo Tosatti <mtosatti@redhat.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Cornelia Huck <cohuck@redhat.com> Cc: Stefan Hajnoczi <stefanha@redhat.com> Acked-by: David Gibson <david@gibson.dropbear.id.au> Acked-by: Greg Kurz <groug@kaod.org> Acked-by: Cornelia Huck <cohuck@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed by: Peter Chubb <peter.chubb@data61.csiro.au> Acked-by: Max Reitz <mreitz@redhat.com> Acked-by: Marcel Apfelbaum <marcel@redhat.com> Message-Id: <e1cfa2cd47087c248dd24caca9c33d9af0c499b0.1499866456.git.alistair.francis@xilinx.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2017-07-12 15:57:41 +02:00
warn_report("CPU(s) not present in any NUMA nodes: %s",
s->str);
warn_report("All CPU(s) up to maxcpus should be described "
"in NUMA config, ability to start up with partial NUMA "
"mappings is obsoleted and will be removed in future");
}
g_string_free(s, true);
}
MemoryRegion *machine_consume_memdev(MachineState *machine,
HostMemoryBackend *backend)
{
MemoryRegion *ret = host_memory_backend_get_memory(backend);
if (host_memory_backend_is_mapped(backend)) {
error_report("memory backend %s can't be used multiple times.",
object_get_canonical_path_component(OBJECT(backend)));
exit(EXIT_FAILURE);
}
host_memory_backend_set_mapped(backend, true);
vmstate_register_ram_global(ret);
return ret;
}
static bool create_default_memdev(MachineState *ms, const char *path, Error **errp)
{
Object *obj;
MachineClass *mc = MACHINE_GET_CLASS(ms);
bool r = false;
obj = object_new(path ? TYPE_MEMORY_BACKEND_FILE : TYPE_MEMORY_BACKEND_RAM);
if (path) {
if (!object_property_set_str(obj, "mem-path", path, errp)) {
goto out;
}
}
if (!object_property_set_int(obj, "size", ms->ram_size, errp)) {
goto out;
}
object_property_add_child(object_get_objects_root(), mc->default_ram_id,
obj);
/* Ensure backend's memory region name is equal to mc->default_ram_id */
if (!object_property_set_bool(obj, "x-use-canonical-path-for-ramblock-id",
false, errp)) {
goto out;
}
if (!user_creatable_complete(USER_CREATABLE(obj), errp)) {
goto out;
}
r = object_property_set_link(OBJECT(ms), "memory-backend", obj, errp);
out:
object_unref(obj);
return r;
}
void machine_run_board_init(MachineState *machine, const char *mem_path, Error **errp)
{
MachineClass *machine_class = MACHINE_GET_CLASS(machine);
ObjectClass *oc = object_class_by_name(machine->cpu_type);
CPUClass *cc;
/* This checkpoint is required by replay to separate prior clock
reading from the other reads, because timer polling functions query
clock values from the log. */
replay_checkpoint(CHECKPOINT_INIT);
if (!xen_enabled()) {
/* On 32-bit hosts, QEMU is limited by virtual address space */
if (machine->ram_size > (2047 << 20) && HOST_LONG_BITS == 32) {
error_setg(errp, "at most 2047 MB RAM can be simulated");
return;
}
}
if (machine->memdev) {
ram_addr_t backend_size = object_property_get_uint(OBJECT(machine->memdev),
"size", &error_abort);
if (backend_size != machine->ram_size) {
error_setg(errp, "Machine memory size does not match the size of the memory backend");
return;
}
} else if (machine_class->default_ram_id && machine->ram_size &&
numa_uses_legacy_mem()) {
if (!create_default_memdev(current_machine, mem_path, errp)) {
return;
}
}
if (machine->numa_state) {
numa_complete_configuration(machine);
if (machine->numa_state->num_nodes) {
machine_numa_finish_cpu_init(machine);
}
}
if (!machine->ram && machine->memdev) {
machine->ram = machine_consume_memdev(machine, machine->memdev);
}
/* If the machine supports the valid_cpu_types check and the user
* specified a CPU with -cpu check here that the user CPU is supported.
*/
if (machine_class->valid_cpu_types && machine->cpu_type) {
int i;
for (i = 0; machine_class->valid_cpu_types[i]; i++) {
if (object_class_dynamic_cast(oc,
machine_class->valid_cpu_types[i])) {
/* The user specificed CPU is in the valid field, we are
* good to go.
*/
break;
}
}
if (!machine_class->valid_cpu_types[i]) {
/* The user specified CPU is not valid */
error_report("Invalid CPU type: %s", machine->cpu_type);
error_printf("The valid types are: %s",
machine_class->valid_cpu_types[0]);
for (i = 1; machine_class->valid_cpu_types[i]; i++) {
error_printf(", %s", machine_class->valid_cpu_types[i]);
}
error_printf("\n");
exit(1);
}
}
/* Check if CPU type is deprecated and warn if so */
cc = CPU_CLASS(oc);
if (cc && cc->deprecation_note) {
warn_report("CPU model %s is deprecated -- %s", machine->cpu_type,
cc->deprecation_note);
}
if (machine->cgs) {
/*
* With confidential guests, the host can't see the real
* contents of RAM, so there's no point in it trying to merge
* areas.
*/
machine_set_mem_merge(OBJECT(machine), false, &error_abort);
/*
* Virtio devices can't count on directly accessing guest
* memory, so they need iommu_platform=on to use normal DMA
* mechanisms. That requires also disabling legacy virtio
* support for those virtio pci devices which allow it.
*/
object_register_sugar_prop(TYPE_VIRTIO_PCI, "disable-legacy",
"on", true);
object_register_sugar_prop(TYPE_VIRTIO_DEVICE, "iommu_platform",
"on", false);
}
accel_init_interfaces(ACCEL_GET_CLASS(machine->accelerator));
machine_class->init(machine);
phase_advance(PHASE_MACHINE_INITIALIZED);
}
static NotifierList machine_init_done_notifiers =
NOTIFIER_LIST_INITIALIZER(machine_init_done_notifiers);
void qemu_add_machine_init_done_notifier(Notifier *notify)
{
notifier_list_add(&machine_init_done_notifiers, notify);
if (phase_check(PHASE_MACHINE_READY)) {
notify->notify(notify, NULL);
}
}
void qemu_remove_machine_init_done_notifier(Notifier *notify)
{
notifier_remove(notify);
}
void qdev_machine_creation_done(void)
{
cpu_synchronize_all_post_init();
if (current_machine->boot_config.has_once) {
qemu_boot_set(current_machine->boot_config.once, &error_fatal);
qemu_register_reset(restore_boot_order, g_strdup(current_machine->boot_config.order));
}
/*
* ok, initial machine setup is done, starting from now we can
* only create hotpluggable devices
*/
phase_advance(PHASE_MACHINE_READY);
qdev_assert_realized_properly();
/* TODO: once all bus devices are qdevified, this should be done
* when bus is created by qdev.c */
/*
* TODO: If we had a main 'reset container' that the whole system
* lived in, we could reset that using the multi-phase reset
* APIs. For the moment, we just reset the sysbus, which will cause
* all devices hanging off it (and all their child buses, recursively)
* to be reset. Note that this will *not* reset any Device objects
* which are not attached to some part of the qbus tree!
*/
qemu_register_reset(resettable_cold_reset_fn, sysbus_get_default());
notifier_list_notify(&machine_init_done_notifiers, NULL);
if (rom_check_and_register_reset() != 0) {
exit(1);
}
replay_start();
/* This checkpoint is required by replay to separate prior clock
reading from the other reads, because timer polling functions query
clock values from the log. */
replay_checkpoint(CHECKPOINT_RESET);
qemu_system_reset(SHUTDOWN_CAUSE_NONE);
register_global_state();
}
static const TypeInfo machine_info = {
.name = TYPE_MACHINE,
.parent = TYPE_OBJECT,
.abstract = true,
.class_size = sizeof(MachineClass),
.class_init = machine_class_init,
.class_base_init = machine_class_base_init,
.instance_size = sizeof(MachineState),
.instance_init = machine_initfn,
.instance_finalize = machine_finalize,
};
static void machine_register_types(void)
{
type_register_static(&machine_info);
}
type_init(machine_register_types)