m68k: add a system controller
Add a system controller for the m68k-virt machine. This controller allows the kernel to power off or reset the machine. Signed-off-by: Laurent Vivier <laurent@vivier.eu> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20210312214145.2936082-5-laurent@vivier.eu>
This commit is contained in:
parent
2fde99ee31
commit
0791bc02b8
26
docs/specs/virt-ctlr.txt
Normal file
26
docs/specs/virt-ctlr.txt
Normal file
@ -0,0 +1,26 @@
|
||||
Virtual System Controller
|
||||
=========================
|
||||
|
||||
This device is a simple interface defined for the pure virtual machine with no
|
||||
hardware reference implementation to allow the guest kernel to send command
|
||||
to the host hypervisor.
|
||||
|
||||
The specification can evolve, the current state is defined as below.
|
||||
|
||||
This is a MMIO mapped device using 256 bytes.
|
||||
|
||||
Two 32bit registers are defined:
|
||||
|
||||
1- the features register (read-only, address 0x00)
|
||||
|
||||
This register allows the device to report features supported by the
|
||||
controller.
|
||||
The only feature supported for the moment is power control (0x01).
|
||||
|
||||
2- the command register (write-only, address 0x04)
|
||||
|
||||
This register allows the kernel to send the commands to the hypervisor.
|
||||
The implemented commands are part of the power control feature and
|
||||
are reset (1), halt (2) and panic (3).
|
||||
A basic command, no-op (0), is always present and can be used to test the
|
||||
register access. This command has no effect.
|
@ -183,4 +183,7 @@ config SIFIVE_U_OTP
|
||||
config SIFIVE_U_PRCI
|
||||
bool
|
||||
|
||||
config VIRT_CTRL
|
||||
bool
|
||||
|
||||
source macio/Kconfig
|
||||
|
@ -24,6 +24,9 @@ softmmu_ss.add(when: 'CONFIG_ARM11SCU', if_true: files('arm11scu.c'))
|
||||
# Mac devices
|
||||
softmmu_ss.add(when: 'CONFIG_MOS6522', if_true: files('mos6522.c'))
|
||||
|
||||
# virt devices
|
||||
softmmu_ss.add(when: 'CONFIG_VIRT_CTRL', if_true: files('virt_ctrl.c'))
|
||||
|
||||
# RISC-V devices
|
||||
softmmu_ss.add(when: 'CONFIG_MCHP_PFSOC_DMC', if_true: files('mchp_pfsoc_dmc.c'))
|
||||
softmmu_ss.add(when: 'CONFIG_MCHP_PFSOC_IOSCB', if_true: files('mchp_pfsoc_ioscb.c'))
|
||||
|
@ -255,3 +255,10 @@ pca955x_gpio_change(const char *description, unsigned id, unsigned prev_state, u
|
||||
bcm2835_cprman_read(uint64_t offset, uint64_t value) "offset:0x%" PRIx64 " value:0x%" PRIx64
|
||||
bcm2835_cprman_write(uint64_t offset, uint64_t value) "offset:0x%" PRIx64 " value:0x%" PRIx64
|
||||
bcm2835_cprman_write_invalid_magic(uint64_t offset, uint64_t value) "offset:0x%" PRIx64 " value:0x%" PRIx64
|
||||
|
||||
# virt_ctrl.c
|
||||
virt_ctrl_read(void *dev, unsigned int addr, unsigned int size, uint64_t value) "ctrl: %p reg: 0x%02x size: %d value: 0x%"PRIx64
|
||||
virt_ctrl_write(void *dev, unsigned int addr, unsigned int size, uint64_t value) "ctrl: %p reg: 0x%02x size: %d value: 0x%"PRIx64
|
||||
virt_ctrl_reset(void *dev) "ctrl: %p"
|
||||
virt_ctrl_realize(void *dev) "ctrl: %p"
|
||||
virt_ctrl_instance_init(void *dev) "ctrl: %p"
|
||||
|
151
hw/misc/virt_ctrl.c
Normal file
151
hw/misc/virt_ctrl.c
Normal file
@ -0,0 +1,151 @@
|
||||
/*
|
||||
* SPDX-License-Identifer: GPL-2.0-or-later
|
||||
*
|
||||
* Virt system Controller
|
||||
*/
|
||||
|
||||
#include "qemu/osdep.h"
|
||||
#include "hw/irq.h"
|
||||
#include "hw/qdev-properties.h"
|
||||
#include "hw/sysbus.h"
|
||||
#include "migration/vmstate.h"
|
||||
#include "qemu/log.h"
|
||||
#include "trace.h"
|
||||
#include "sysemu/runstate.h"
|
||||
#include "hw/misc/virt_ctrl.h"
|
||||
|
||||
enum {
|
||||
REG_FEATURES = 0x00,
|
||||
REG_CMD = 0x04,
|
||||
};
|
||||
|
||||
#define FEAT_POWER_CTRL 0x00000001
|
||||
|
||||
enum {
|
||||
CMD_NOOP,
|
||||
CMD_RESET,
|
||||
CMD_HALT,
|
||||
CMD_PANIC,
|
||||
};
|
||||
|
||||
static uint64_t virt_ctrl_read(void *opaque, hwaddr addr, unsigned size)
|
||||
{
|
||||
VirtCtrlState *s = opaque;
|
||||
uint64_t value = 0;
|
||||
|
||||
switch (addr) {
|
||||
case REG_FEATURES:
|
||||
value = FEAT_POWER_CTRL;
|
||||
break;
|
||||
default:
|
||||
qemu_log_mask(LOG_UNIMP,
|
||||
"%s: unimplemented register read 0x%02"HWADDR_PRIx"\n",
|
||||
__func__, addr);
|
||||
break;
|
||||
}
|
||||
|
||||
trace_virt_ctrl_write(s, addr, size, value);
|
||||
|
||||
return value;
|
||||
}
|
||||
|
||||
static void virt_ctrl_write(void *opaque, hwaddr addr, uint64_t value,
|
||||
unsigned size)
|
||||
{
|
||||
VirtCtrlState *s = opaque;
|
||||
|
||||
trace_virt_ctrl_write(s, addr, size, value);
|
||||
|
||||
switch (addr) {
|
||||
case REG_CMD:
|
||||
switch (value) {
|
||||
case CMD_NOOP:
|
||||
break;
|
||||
case CMD_RESET:
|
||||
qemu_system_reset_request(SHUTDOWN_CAUSE_GUEST_RESET);
|
||||
break;
|
||||
case CMD_HALT:
|
||||
qemu_system_shutdown_request(SHUTDOWN_CAUSE_GUEST_SHUTDOWN);
|
||||
break;
|
||||
case CMD_PANIC:
|
||||
qemu_system_shutdown_request(SHUTDOWN_CAUSE_GUEST_PANIC);
|
||||
break;
|
||||
}
|
||||
break;
|
||||
default:
|
||||
qemu_log_mask(LOG_UNIMP,
|
||||
"%s: unimplemented register write 0x%02"HWADDR_PRIx"\n",
|
||||
__func__, addr);
|
||||
break;
|
||||
}
|
||||
}
|
||||
|
||||
static const MemoryRegionOps virt_ctrl_ops = {
|
||||
.read = virt_ctrl_read,
|
||||
.write = virt_ctrl_write,
|
||||
.endianness = DEVICE_NATIVE_ENDIAN,
|
||||
.valid.max_access_size = 4,
|
||||
.impl.max_access_size = 4,
|
||||
};
|
||||
|
||||
static void virt_ctrl_reset(DeviceState *dev)
|
||||
{
|
||||
VirtCtrlState *s = VIRT_CTRL(dev);
|
||||
|
||||
trace_virt_ctrl_reset(s);
|
||||
}
|
||||
|
||||
static void virt_ctrl_realize(DeviceState *dev, Error **errp)
|
||||
{
|
||||
VirtCtrlState *s = VIRT_CTRL(dev);
|
||||
|
||||
trace_virt_ctrl_instance_init(s);
|
||||
|
||||
memory_region_init_io(&s->iomem, OBJECT(s), &virt_ctrl_ops, s,
|
||||
"virt-ctrl", 0x100);
|
||||
}
|
||||
|
||||
static const VMStateDescription vmstate_virt_ctrl = {
|
||||
.name = "virt-ctrl",
|
||||
.version_id = 1,
|
||||
.minimum_version_id = 1,
|
||||
.fields = (VMStateField[]) {
|
||||
VMSTATE_UINT32(irq_enabled, VirtCtrlState),
|
||||
VMSTATE_END_OF_LIST()
|
||||
}
|
||||
};
|
||||
|
||||
static void virt_ctrl_instance_init(Object *obj)
|
||||
{
|
||||
SysBusDevice *dev = SYS_BUS_DEVICE(obj);
|
||||
VirtCtrlState *s = VIRT_CTRL(obj);
|
||||
|
||||
trace_virt_ctrl_instance_init(s);
|
||||
|
||||
sysbus_init_mmio(dev, &s->iomem);
|
||||
sysbus_init_irq(dev, &s->irq);
|
||||
}
|
||||
|
||||
static void virt_ctrl_class_init(ObjectClass *oc, void *data)
|
||||
{
|
||||
DeviceClass *dc = DEVICE_CLASS(oc);
|
||||
|
||||
dc->reset = virt_ctrl_reset;
|
||||
dc->realize = virt_ctrl_realize;
|
||||
dc->vmsd = &vmstate_virt_ctrl;
|
||||
}
|
||||
|
||||
static const TypeInfo virt_ctrl_info = {
|
||||
.name = TYPE_VIRT_CTRL,
|
||||
.parent = TYPE_SYS_BUS_DEVICE,
|
||||
.class_init = virt_ctrl_class_init,
|
||||
.instance_init = virt_ctrl_instance_init,
|
||||
.instance_size = sizeof(VirtCtrlState),
|
||||
};
|
||||
|
||||
static void virt_ctrl_register_types(void)
|
||||
{
|
||||
type_register_static(&virt_ctrl_info);
|
||||
}
|
||||
|
||||
type_init(virt_ctrl_register_types)
|
22
include/hw/misc/virt_ctrl.h
Normal file
22
include/hw/misc/virt_ctrl.h
Normal file
@ -0,0 +1,22 @@
|
||||
/*
|
||||
* SPDX-License-Identifer: GPL-2.0-or-later
|
||||
*
|
||||
* Virt system Controller
|
||||
*/
|
||||
|
||||
#ifndef VIRT_CTRL_H
|
||||
#define VIRT_CTRL_H
|
||||
|
||||
#define TYPE_VIRT_CTRL "virt-ctrl"
|
||||
OBJECT_DECLARE_SIMPLE_TYPE(VirtCtrlState, VIRT_CTRL)
|
||||
|
||||
struct VirtCtrlState {
|
||||
SysBusDevice parent_obj;
|
||||
|
||||
MemoryRegion iomem;
|
||||
qemu_irq irq;
|
||||
|
||||
uint32_t irq_enabled;
|
||||
};
|
||||
|
||||
#endif
|
Loading…
Reference in New Issue
Block a user