From 246ff44295d0153d1d272b4d4a77c4bf9cc6ad66 Mon Sep 17 00:00:00 2001 From: Peter Maydell Date: Fri, 6 Nov 2020 15:27:35 +0000 Subject: [PATCH] linux-user/sparc: Correct sparc64_get/set_context() FPU handling The handling of the FPU state in sparc64_get_context() and sparc64_set_context() is not the same as what the kernel actually does: we unconditionally read and write the FP registers and the FSR, GSR and FPRS, but the kernel logic is more complicated: * in get_context the kernel has code for saving FPU registers, but it is hidden inside an "if (fenab) condition and the fenab flag is always set to 0 (inside an "#if 1" which has been in the kernel for over 15 years). So the effect is that the FPU state part is always written as zeroes. * in set_context the kernel looks at the fenab field in the structure from the guest, and only restores the state if it is set; it also looks at the structure's FPRS to see whether either the upper or lower or both halves of the register file have valid data. Bring our implementations into line with the kernel: * in get_context: - clear the entire target_ucontext at the top of the function (as the kernel does) - then don't write the FPU state, so those fields remain zero - this fixes Coverity issue CID 1432305 by deleting the code it was complaining about * in set_context: - check the fenab and the fpsr to decide which parts of the FPU data to restore, if any - instead of setting the FPU registers by doing two 32-bit loads and filling in the .upper and .lower parts of the CPU_Double union separately, just do a 64-bit load of the whole register at once. This fixes Coverity issue CID 1432303 because we now access the dregs[] part of the mcfpu_fregs union rather than the sregs[] part (which is not large enough to actually cover the whole of the data, so we were accessing off the end of sregs[]) We change both functions in a single commit to avoid potentially breaking bisection. Signed-off-by: Peter Maydell Reviewed-by: Richard Henderson Message-Id: <20201106152738.26026-2-peter.maydell@linaro.org> [lv: fix FPRS_DU loop s/31/32/] Signed-off-by: Laurent Vivier --- linux-user/sparc/signal.c | 74 +++++++++++++++++++++++---------------- target/sparc/cpu.h | 4 ++- 2 files changed, 46 insertions(+), 32 deletions(-) diff --git a/linux-user/sparc/signal.c b/linux-user/sparc/signal.c index d12adc8e6f..0057b48fad 100644 --- a/linux-user/sparc/signal.c +++ b/linux-user/sparc/signal.c @@ -402,8 +402,10 @@ void sparc64_set_context(CPUSPARCState *env) abi_ulong ucp_addr; struct target_ucontext *ucp; target_mc_gregset_t *grp; + target_mc_fpu_t *fpup; abi_ulong pc, npc, tstate; unsigned int i; + unsigned char fenab; ucp_addr = env->regwptr[WREG_O0]; if (!lock_user_struct(VERIFY_READ, ucp, ucp_addr, 1)) { @@ -467,26 +469,42 @@ void sparc64_set_context(CPUSPARCState *env) __get_user(env->regwptr[WREG_FP], &(ucp->tuc_mcontext.mc_fp)); __get_user(env->regwptr[WREG_I7], &(ucp->tuc_mcontext.mc_i7)); - /* FIXME this does not match how the kernel handles the FPU in - * its sparc64_set_context implementation. In particular the FPU - * is only restored if fenab is non-zero in: - * __get_user(fenab, &(ucp->tuc_mcontext.mc_fpregs.mcfpu_enab)); - */ - __get_user(env->fprs, &(ucp->tuc_mcontext.mc_fpregs.mcfpu_fprs)); - { - uint32_t *src = ucp->tuc_mcontext.mc_fpregs.mcfpu_fregs.sregs; - for (i = 0; i < 64; i++, src++) { - if (i & 1) { - __get_user(env->fpr[i/2].l.lower, src); - } else { - __get_user(env->fpr[i/2].l.upper, src); + fpup = &ucp->tuc_mcontext.mc_fpregs; + + __get_user(fenab, &(fpup->mcfpu_enab)); + if (fenab) { + abi_ulong fprs; + + /* + * We use the FPRS from the guest only in deciding whether + * to restore the upper, lower, or both banks of the FPU regs. + * The kernel here writes the FPU register data into the + * process's current_thread_info state and unconditionally + * clears FPRS and TSTATE_PEF: this disables the FPU so that the + * next FPU-disabled trap will copy the data out of + * current_thread_info and into the real FPU registers. + * QEMU doesn't need to handle lazy-FPU-state-restoring like that, + * so we always load the data directly into the FPU registers + * and leave FPRS and TSTATE_PEF alone (so the FPU stays enabled). + * Note that because we (and the kernel) always write zeroes for + * the fenab and fprs in sparc64_get_context() none of this code + * will execute unless the guest manually constructed or changed + * the context structure. + */ + __get_user(fprs, &(fpup->mcfpu_fprs)); + if (fprs & FPRS_DL) { + for (i = 0; i < 16; i++) { + __get_user(env->fpr[i].ll, &(fpup->mcfpu_fregs.dregs[i])); } } + if (fprs & FPRS_DU) { + for (i = 16; i < 32; i++) { + __get_user(env->fpr[i].ll, &(fpup->mcfpu_fregs.dregs[i])); + } + } + __get_user(env->fsr, &(fpup->mcfpu_fsr)); + __get_user(env->gsr, &(fpup->mcfpu_gsr)); } - __get_user(env->fsr, - &(ucp->tuc_mcontext.mc_fpregs.mcfpu_fsr)); - __get_user(env->gsr, - &(ucp->tuc_mcontext.mc_fpregs.mcfpu_gsr)); unlock_user_struct(ucp, ucp_addr, 0); return; do_sigsegv: @@ -509,7 +527,9 @@ void sparc64_get_context(CPUSPARCState *env) if (!lock_user_struct(VERIFY_WRITE, ucp, ucp_addr, 0)) { goto do_sigsegv; } - + + memset(ucp, 0, sizeof(*ucp)); + mcp = &ucp->tuc_mcontext; grp = &mcp->mc_gregs; @@ -572,19 +592,11 @@ void sparc64_get_context(CPUSPARCState *env) __put_user(env->regwptr[WREG_FP], &(mcp->mc_fp)); __put_user(env->regwptr[WREG_I7], &(mcp->mc_i7)); - { - uint32_t *dst = ucp->tuc_mcontext.mc_fpregs.mcfpu_fregs.sregs; - for (i = 0; i < 64; i++, dst++) { - if (i & 1) { - __put_user(env->fpr[i/2].l.lower, dst); - } else { - __put_user(env->fpr[i/2].l.upper, dst); - } - } - } - __put_user(env->fsr, &(mcp->mc_fpregs.mcfpu_fsr)); - __put_user(env->gsr, &(mcp->mc_fpregs.mcfpu_gsr)); - __put_user(env->fprs, &(mcp->mc_fpregs.mcfpu_fprs)); + /* + * We don't write out the FPU state. This matches the kernel's + * implementation (which has the code for doing this but + * hidden behind an "if (fenab)" where fenab is always 0). + */ if (err) goto do_sigsegv; diff --git a/target/sparc/cpu.h b/target/sparc/cpu.h index b9369398f2..277254732b 100644 --- a/target/sparc/cpu.h +++ b/target/sparc/cpu.h @@ -156,7 +156,9 @@ enum { #define PS_IE (1<<1) #define PS_AG (1<<0) /* v9, zero on UA2007 */ -#define FPRS_FEF (1<<2) +#define FPRS_DL (1 << 0) +#define FPRS_DU (1 << 1) +#define FPRS_FEF (1 << 2) #define HS_PRIV (1<<2) #endif