hw/mips/malta: Use bootloader generator API for nanoMIPS CPUs (4/5)

Part 4/5: Convert GT64120 ISD base address setup

Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20221211204533.85359-10-philmd@linaro.org>
This commit is contained in:
Philippe Mathieu-Daudé 2022-12-11 18:47:21 +01:00
parent 02e0bec464
commit 3265f41fc7

View File

@ -689,46 +689,20 @@ static void write_bootloader_nanomips(uint8_t *base, uint64_t run_addr,
stw_p(p++, 0x80e7); stw_p(p++, NM_LO(loaderparams.ram_low_size));
/* ori a3,a3,%lo(loaderparams.ram_low_size) */
/*
* Load BAR registers as done by YAMON:
*/
stw_p(p++, 0xe040); stw_p(p++, 0x0681);
/* lui t1, %hi(0xb4000000) */
#if TARGET_BIG_ENDIAN
#define cpu_to_gt32 cpu_to_le32
stw_p(p++, 0xe020); stw_p(p++, 0x0be1);
/* lui t0, %hi(0xdf000000) */
/* 0x68 corresponds to GT_ISD (from hw/mips/gt64xxx_pci.c) */
stw_p(p++, 0x8422); stw_p(p++, 0x9068);
/* sw t0, 0x68(t1) */
stw_p(p++, 0xe040); stw_p(p++, 0x077d);
/* lui t1, %hi(0xbbe00000) */
stw_p(p++, 0xe020); stw_p(p++, 0x0801);
/* lui t0, %hi(0xc0000000) */
#else
#define cpu_to_gt32 cpu_to_be32
stw_p(p++, 0x0020); stw_p(p++, 0x00df);
/* addiu[32] t0, $0, 0xdf */
/* 0x68 corresponds to GT_ISD */
stw_p(p++, 0x8422); stw_p(p++, 0x9068);
/* sw t0, 0x68(t1) */
/* Use kseg2 remapped address 0x1be00000 */
stw_p(p++, 0xe040); stw_p(p++, 0x077d);
/* lui t1, %hi(0xbbe00000) */
stw_p(p++, 0x0020); stw_p(p++, 0x00c0);
/* addiu[32] t0, $0, 0xc0 */
#endif
v = p;
/* setup MEM-to-PCI0 mapping as done by YAMON */
/* move GT64120 registers from 0x14000000 to 0x1be00000 */
bl_gen_write_u32(&v, /* GT_ISD */
cpu_mips_phys_to_kseg1(NULL, 0x14000000 + 0x68),
cpu_to_gt32(0x1be00000 << 3));
/* setup PCI0 io window to 0x18000000-0x181fffff */
bl_gen_write_u32(&v, /* GT_PCI0IOLD */
cpu_mips_phys_to_kseg1(NULL, 0x1be00000 + 0x48),