ide: split away ide-internal.h
move lots of IDE defines to the new file. also make a bunch of functions non-static and add declaration for them. Needed by the following patches of this series. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This commit is contained in:
Gerd Hoffmann
Anthony Liguori
parent
bcbdc4d354
commit
356721aede
534
hw/ide-internal.h
Normal file
534
hw/ide-internal.h
Normal file
@ -0,0 +1,534 @@
|
||||
#ifndef HW_IDE_INTERNAL_H
|
||||
#define HW_IDE_INTERNAL_H
|
||||
|
||||
/*
|
||||
* QEMU IDE Emulation -- internal header file
|
||||
* only hw/ide*.c is supposed to include this file.
|
||||
* non-internal declarations are in hw/ide.h
|
||||
*/
|
||||
|
||||
/* debug IDE devices */
|
||||
//#define DEBUG_IDE
|
||||
//#define DEBUG_IDE_ATAPI
|
||||
//#define DEBUG_AIO
|
||||
#define USE_DMA_CDROM
|
||||
|
||||
typedef struct IDEBus IDEBus;
|
||||
typedef struct IDEState IDEState;
|
||||
typedef struct BMDMAState BMDMAState;
|
||||
|
||||
/* debug IDE devices */
|
||||
//#define DEBUG_IDE
|
||||
//#define DEBUG_IDE_ATAPI
|
||||
//#define DEBUG_AIO
|
||||
#define USE_DMA_CDROM
|
||||
|
||||
/* Bits of HD_STATUS */
|
||||
#define ERR_STAT 0x01
|
||||
#define INDEX_STAT 0x02
|
||||
#define ECC_STAT 0x04 /* Corrected error */
|
||||
#define DRQ_STAT 0x08
|
||||
#define SEEK_STAT 0x10
|
||||
#define SRV_STAT 0x10
|
||||
#define WRERR_STAT 0x20
|
||||
#define READY_STAT 0x40
|
||||
#define BUSY_STAT 0x80
|
||||
|
||||
/* Bits for HD_ERROR */
|
||||
#define MARK_ERR 0x01 /* Bad address mark */
|
||||
#define TRK0_ERR 0x02 /* couldn't find track 0 */
|
||||
#define ABRT_ERR 0x04 /* Command aborted */
|
||||
#define MCR_ERR 0x08 /* media change request */
|
||||
#define ID_ERR 0x10 /* ID field not found */
|
||||
#define MC_ERR 0x20 /* media changed */
|
||||
#define ECC_ERR 0x40 /* Uncorrectable ECC error */
|
||||
#define BBD_ERR 0x80 /* pre-EIDE meaning: block marked bad */
|
||||
#define ICRC_ERR 0x80 /* new meaning: CRC error during transfer */
|
||||
|
||||
/* Bits of HD_NSECTOR */
|
||||
#define CD 0x01
|
||||
#define IO 0x02
|
||||
#define REL 0x04
|
||||
#define TAG_MASK 0xf8
|
||||
|
||||
#define IDE_CMD_RESET 0x04
|
||||
#define IDE_CMD_DISABLE_IRQ 0x02
|
||||
|
||||
/* ATA/ATAPI Commands pre T13 Spec */
|
||||
#define WIN_NOP 0x00
|
||||
/*
|
||||
* 0x01->0x02 Reserved
|
||||
*/
|
||||
#define CFA_REQ_EXT_ERROR_CODE 0x03 /* CFA Request Extended Error Code */
|
||||
/*
|
||||
* 0x04->0x07 Reserved
|
||||
*/
|
||||
#define WIN_SRST 0x08 /* ATAPI soft reset command */
|
||||
#define WIN_DEVICE_RESET 0x08
|
||||
/*
|
||||
* 0x09->0x0F Reserved
|
||||
*/
|
||||
#define WIN_RECAL 0x10
|
||||
#define WIN_RESTORE WIN_RECAL
|
||||
/*
|
||||
* 0x10->0x1F Reserved
|
||||
*/
|
||||
#define WIN_READ 0x20 /* 28-Bit */
|
||||
#define WIN_READ_ONCE 0x21 /* 28-Bit without retries */
|
||||
#define WIN_READ_LONG 0x22 /* 28-Bit */
|
||||
#define WIN_READ_LONG_ONCE 0x23 /* 28-Bit without retries */
|
||||
#define WIN_READ_EXT 0x24 /* 48-Bit */
|
||||
#define WIN_READDMA_EXT 0x25 /* 48-Bit */
|
||||
#define WIN_READDMA_QUEUED_EXT 0x26 /* 48-Bit */
|
||||
#define WIN_READ_NATIVE_MAX_EXT 0x27 /* 48-Bit */
|
||||
/*
|
||||
* 0x28
|
||||
*/
|
||||
#define WIN_MULTREAD_EXT 0x29 /* 48-Bit */
|
||||
/*
|
||||
* 0x2A->0x2F Reserved
|
||||
*/
|
||||
#define WIN_WRITE 0x30 /* 28-Bit */
|
||||
#define WIN_WRITE_ONCE 0x31 /* 28-Bit without retries */
|
||||
#define WIN_WRITE_LONG 0x32 /* 28-Bit */
|
||||
#define WIN_WRITE_LONG_ONCE 0x33 /* 28-Bit without retries */
|
||||
#define WIN_WRITE_EXT 0x34 /* 48-Bit */
|
||||
#define WIN_WRITEDMA_EXT 0x35 /* 48-Bit */
|
||||
#define WIN_WRITEDMA_QUEUED_EXT 0x36 /* 48-Bit */
|
||||
#define WIN_SET_MAX_EXT 0x37 /* 48-Bit */
|
||||
#define CFA_WRITE_SECT_WO_ERASE 0x38 /* CFA Write Sectors without erase */
|
||||
#define WIN_MULTWRITE_EXT 0x39 /* 48-Bit */
|
||||
/*
|
||||
* 0x3A->0x3B Reserved
|
||||
*/
|
||||
#define WIN_WRITE_VERIFY 0x3C /* 28-Bit */
|
||||
/*
|
||||
* 0x3D->0x3F Reserved
|
||||
*/
|
||||
#define WIN_VERIFY 0x40 /* 28-Bit - Read Verify Sectors */
|
||||
#define WIN_VERIFY_ONCE 0x41 /* 28-Bit - without retries */
|
||||
#define WIN_VERIFY_EXT 0x42 /* 48-Bit */
|
||||
/*
|
||||
* 0x43->0x4F Reserved
|
||||
*/
|
||||
#define WIN_FORMAT 0x50
|
||||
/*
|
||||
* 0x51->0x5F Reserved
|
||||
*/
|
||||
#define WIN_INIT 0x60
|
||||
/*
|
||||
* 0x61->0x5F Reserved
|
||||
*/
|
||||
#define WIN_SEEK 0x70 /* 0x70-0x7F Reserved */
|
||||
#define CFA_TRANSLATE_SECTOR 0x87 /* CFA Translate Sector */
|
||||
#define WIN_DIAGNOSE 0x90
|
||||
#define WIN_SPECIFY 0x91 /* set drive geometry translation */
|
||||
#define WIN_DOWNLOAD_MICROCODE 0x92
|
||||
#define WIN_STANDBYNOW2 0x94
|
||||
#define CFA_IDLEIMMEDIATE 0x95 /* force drive to become "ready" */
|
||||
#define WIN_STANDBY2 0x96
|
||||
#define WIN_SETIDLE2 0x97
|
||||
#define WIN_CHECKPOWERMODE2 0x98
|
||||
#define WIN_SLEEPNOW2 0x99
|
||||
/*
|
||||
* 0x9A VENDOR
|
||||
*/
|
||||
#define WIN_PACKETCMD 0xA0 /* Send a packet command. */
|
||||
#define WIN_PIDENTIFY 0xA1 /* identify ATAPI device */
|
||||
#define WIN_QUEUED_SERVICE 0xA2
|
||||
#define WIN_SMART 0xB0 /* self-monitoring and reporting */
|
||||
#define CFA_ACCESS_METADATA_STORAGE 0xB8
|
||||
#define CFA_ERASE_SECTORS 0xC0 /* microdrives implement as NOP */
|
||||
#define WIN_MULTREAD 0xC4 /* read sectors using multiple mode*/
|
||||
#define WIN_MULTWRITE 0xC5 /* write sectors using multiple mode */
|
||||
#define WIN_SETMULT 0xC6 /* enable/disable multiple mode */
|
||||
#define WIN_READDMA_QUEUED 0xC7 /* read sectors using Queued DMA transfers */
|
||||
#define WIN_READDMA 0xC8 /* read sectors using DMA transfers */
|
||||
#define WIN_READDMA_ONCE 0xC9 /* 28-Bit - without retries */
|
||||
#define WIN_WRITEDMA 0xCA /* write sectors using DMA transfers */
|
||||
#define WIN_WRITEDMA_ONCE 0xCB /* 28-Bit - without retries */
|
||||
#define WIN_WRITEDMA_QUEUED 0xCC /* write sectors using Queued DMA transfers */
|
||||
#define CFA_WRITE_MULTI_WO_ERASE 0xCD /* CFA Write multiple without erase */
|
||||
#define WIN_GETMEDIASTATUS 0xDA
|
||||
#define WIN_ACKMEDIACHANGE 0xDB /* ATA-1, ATA-2 vendor */
|
||||
#define WIN_POSTBOOT 0xDC
|
||||
#define WIN_PREBOOT 0xDD
|
||||
#define WIN_DOORLOCK 0xDE /* lock door on removable drives */
|
||||
#define WIN_DOORUNLOCK 0xDF /* unlock door on removable drives */
|
||||
#define WIN_STANDBYNOW1 0xE0
|
||||
#define WIN_IDLEIMMEDIATE 0xE1 /* force drive to become "ready" */
|
||||
#define WIN_STANDBY 0xE2 /* Set device in Standby Mode */
|
||||
#define WIN_SETIDLE1 0xE3
|
||||
#define WIN_READ_BUFFER 0xE4 /* force read only 1 sector */
|
||||
#define WIN_CHECKPOWERMODE1 0xE5
|
||||
#define WIN_SLEEPNOW1 0xE6
|
||||
#define WIN_FLUSH_CACHE 0xE7
|
||||
#define WIN_WRITE_BUFFER 0xE8 /* force write only 1 sector */
|
||||
#define WIN_WRITE_SAME 0xE9 /* read ata-2 to use */
|
||||
/* SET_FEATURES 0x22 or 0xDD */
|
||||
#define WIN_FLUSH_CACHE_EXT 0xEA /* 48-Bit */
|
||||
#define WIN_IDENTIFY 0xEC /* ask drive to identify itself */
|
||||
#define WIN_MEDIAEJECT 0xED
|
||||
#define WIN_IDENTIFY_DMA 0xEE /* same as WIN_IDENTIFY, but DMA */
|
||||
#define WIN_SETFEATURES 0xEF /* set special drive features */
|
||||
#define EXABYTE_ENABLE_NEST 0xF0
|
||||
#define IBM_SENSE_CONDITION 0xF0 /* measure disk temperature */
|
||||
#define WIN_SECURITY_SET_PASS 0xF1
|
||||
#define WIN_SECURITY_UNLOCK 0xF2
|
||||
#define WIN_SECURITY_ERASE_PREPARE 0xF3
|
||||
#define WIN_SECURITY_ERASE_UNIT 0xF4
|
||||
#define WIN_SECURITY_FREEZE_LOCK 0xF5
|
||||
#define CFA_WEAR_LEVEL 0xF5 /* microdrives implement as NOP */
|
||||
#define WIN_SECURITY_DISABLE 0xF6
|
||||
#define WIN_READ_NATIVE_MAX 0xF8 /* return the native maximum address */
|
||||
#define WIN_SET_MAX 0xF9
|
||||
#define DISABLE_SEAGATE 0xFB
|
||||
|
||||
/* set to 1 set disable mult support */
|
||||
#define MAX_MULT_SECTORS 16
|
||||
|
||||
#define IDE_DMA_BUF_SECTORS 256
|
||||
|
||||
#if (IDE_DMA_BUF_SECTORS < MAX_MULT_SECTORS)
|
||||
#error "IDE_DMA_BUF_SECTORS must be bigger or equal to MAX_MULT_SECTORS"
|
||||
#endif
|
||||
|
||||
/* ATAPI defines */
|
||||
|
||||
#define ATAPI_PACKET_SIZE 12
|
||||
|
||||
/* The generic packet command opcodes for CD/DVD Logical Units,
|
||||
* From Table 57 of the SFF8090 Ver. 3 (Mt. Fuji) draft standard. */
|
||||
#define GPCMD_BLANK 0xa1
|
||||
#define GPCMD_CLOSE_TRACK 0x5b
|
||||
#define GPCMD_FLUSH_CACHE 0x35
|
||||
#define GPCMD_FORMAT_UNIT 0x04
|
||||
#define GPCMD_GET_CONFIGURATION 0x46
|
||||
#define GPCMD_GET_EVENT_STATUS_NOTIFICATION 0x4a
|
||||
#define GPCMD_GET_PERFORMANCE 0xac
|
||||
#define GPCMD_INQUIRY 0x12
|
||||
#define GPCMD_LOAD_UNLOAD 0xa6
|
||||
#define GPCMD_MECHANISM_STATUS 0xbd
|
||||
#define GPCMD_MODE_SELECT_10 0x55
|
||||
#define GPCMD_MODE_SENSE_10 0x5a
|
||||
#define GPCMD_PAUSE_RESUME 0x4b
|
||||
#define GPCMD_PLAY_AUDIO_10 0x45
|
||||
#define GPCMD_PLAY_AUDIO_MSF 0x47
|
||||
#define GPCMD_PLAY_AUDIO_TI 0x48
|
||||
#define GPCMD_PLAY_CD 0xbc
|
||||
#define GPCMD_PREVENT_ALLOW_MEDIUM_REMOVAL 0x1e
|
||||
#define GPCMD_READ_10 0x28
|
||||
#define GPCMD_READ_12 0xa8
|
||||
#define GPCMD_READ_CDVD_CAPACITY 0x25
|
||||
#define GPCMD_READ_CD 0xbe
|
||||
#define GPCMD_READ_CD_MSF 0xb9
|
||||
#define GPCMD_READ_DISC_INFO 0x51
|
||||
#define GPCMD_READ_DVD_STRUCTURE 0xad
|
||||
#define GPCMD_READ_FORMAT_CAPACITIES 0x23
|
||||
#define GPCMD_READ_HEADER 0x44
|
||||
#define GPCMD_READ_TRACK_RZONE_INFO 0x52
|
||||
#define GPCMD_READ_SUBCHANNEL 0x42
|
||||
#define GPCMD_READ_TOC_PMA_ATIP 0x43
|
||||
#define GPCMD_REPAIR_RZONE_TRACK 0x58
|
||||
#define GPCMD_REPORT_KEY 0xa4
|
||||
#define GPCMD_REQUEST_SENSE 0x03
|
||||
#define GPCMD_RESERVE_RZONE_TRACK 0x53
|
||||
#define GPCMD_SCAN 0xba
|
||||
#define GPCMD_SEEK 0x2b
|
||||
#define GPCMD_SEND_DVD_STRUCTURE 0xad
|
||||
#define GPCMD_SEND_EVENT 0xa2
|
||||
#define GPCMD_SEND_KEY 0xa3
|
||||
#define GPCMD_SEND_OPC 0x54
|
||||
#define GPCMD_SET_READ_AHEAD 0xa7
|
||||
#define GPCMD_SET_STREAMING 0xb6
|
||||
#define GPCMD_START_STOP_UNIT 0x1b
|
||||
#define GPCMD_STOP_PLAY_SCAN 0x4e
|
||||
#define GPCMD_TEST_UNIT_READY 0x00
|
||||
#define GPCMD_VERIFY_10 0x2f
|
||||
#define GPCMD_WRITE_10 0x2a
|
||||
#define GPCMD_WRITE_AND_VERIFY_10 0x2e
|
||||
/* This is listed as optional in ATAPI 2.6, but is (curiously)
|
||||
* missing from Mt. Fuji, Table 57. It _is_ mentioned in Mt. Fuji
|
||||
* Table 377 as an MMC command for SCSi devices though... Most ATAPI
|
||||
* drives support it. */
|
||||
#define GPCMD_SET_SPEED 0xbb
|
||||
/* This seems to be a SCSI specific CD-ROM opcode
|
||||
* to play data at track/index */
|
||||
#define GPCMD_PLAYAUDIO_TI 0x48
|
||||
/*
|
||||
* From MS Media Status Notification Support Specification. For
|
||||
* older drives only.
|
||||
*/
|
||||
#define GPCMD_GET_MEDIA_STATUS 0xda
|
||||
#define GPCMD_MODE_SENSE_6 0x1a
|
||||
|
||||
/* Mode page codes for mode sense/set */
|
||||
#define GPMODE_R_W_ERROR_PAGE 0x01
|
||||
#define GPMODE_WRITE_PARMS_PAGE 0x05
|
||||
#define GPMODE_AUDIO_CTL_PAGE 0x0e
|
||||
#define GPMODE_POWER_PAGE 0x1a
|
||||
#define GPMODE_FAULT_FAIL_PAGE 0x1c
|
||||
#define GPMODE_TO_PROTECT_PAGE 0x1d
|
||||
#define GPMODE_CAPABILITIES_PAGE 0x2a
|
||||
#define GPMODE_ALL_PAGES 0x3f
|
||||
/* Not in Mt. Fuji, but in ATAPI 2.6 -- depricated now in favor
|
||||
* of MODE_SENSE_POWER_PAGE */
|
||||
#define GPMODE_CDROM_PAGE 0x0d
|
||||
|
||||
/*
|
||||
* Based on values from <linux/cdrom.h> but extending CD_MINS
|
||||
* to the maximum common size allowed by the Orange's Book ATIP
|
||||
*
|
||||
* 90 and 99 min CDs are also available but using them as the
|
||||
* upper limit reduces the effectiveness of the heuristic to
|
||||
* detect DVDs burned to less than 25% of their maximum capacity
|
||||
*/
|
||||
|
||||
/* Some generally useful CD-ROM information */
|
||||
#define CD_MINS 80 /* max. minutes per CD */
|
||||
#define CD_SECS 60 /* seconds per minute */
|
||||
#define CD_FRAMES 75 /* frames per second */
|
||||
#define CD_FRAMESIZE 2048 /* bytes per frame, "cooked" mode */
|
||||
#define CD_MAX_BYTES (CD_MINS * CD_SECS * CD_FRAMES * CD_FRAMESIZE)
|
||||
#define CD_MAX_SECTORS (CD_MAX_BYTES / 512)
|
||||
|
||||
/*
|
||||
* The MMC values are not IDE specific and might need to be moved
|
||||
* to a common header if they are also needed for the SCSI emulation
|
||||
*/
|
||||
|
||||
/* Profile list from MMC-6 revision 1 table 91 */
|
||||
#define MMC_PROFILE_NONE 0x0000
|
||||
#define MMC_PROFILE_CD_ROM 0x0008
|
||||
#define MMC_PROFILE_CD_R 0x0009
|
||||
#define MMC_PROFILE_CD_RW 0x000A
|
||||
#define MMC_PROFILE_DVD_ROM 0x0010
|
||||
#define MMC_PROFILE_DVD_R_SR 0x0011
|
||||
#define MMC_PROFILE_DVD_RAM 0x0012
|
||||
#define MMC_PROFILE_DVD_RW_RO 0x0013
|
||||
#define MMC_PROFILE_DVD_RW_SR 0x0014
|
||||
#define MMC_PROFILE_DVD_R_DL_SR 0x0015
|
||||
#define MMC_PROFILE_DVD_R_DL_JR 0x0016
|
||||
#define MMC_PROFILE_DVD_RW_DL 0x0017
|
||||
#define MMC_PROFILE_DVD_DDR 0x0018
|
||||
#define MMC_PROFILE_DVD_PLUS_RW 0x001A
|
||||
#define MMC_PROFILE_DVD_PLUS_R 0x001B
|
||||
#define MMC_PROFILE_DVD_PLUS_RW_DL 0x002A
|
||||
#define MMC_PROFILE_DVD_PLUS_R_DL 0x002B
|
||||
#define MMC_PROFILE_BD_ROM 0x0040
|
||||
#define MMC_PROFILE_BD_R_SRM 0x0041
|
||||
#define MMC_PROFILE_BD_R_RRM 0x0042
|
||||
#define MMC_PROFILE_BD_RE 0x0043
|
||||
#define MMC_PROFILE_HDDVD_ROM 0x0050
|
||||
#define MMC_PROFILE_HDDVD_R 0x0051
|
||||
#define MMC_PROFILE_HDDVD_RAM 0x0052
|
||||
#define MMC_PROFILE_HDDVD_RW 0x0053
|
||||
#define MMC_PROFILE_HDDVD_R_DL 0x0058
|
||||
#define MMC_PROFILE_HDDVD_RW_DL 0x005A
|
||||
#define MMC_PROFILE_INVALID 0xFFFF
|
||||
|
||||
#define ATAPI_INT_REASON_CD 0x01 /* 0 = data transfer */
|
||||
#define ATAPI_INT_REASON_IO 0x02 /* 1 = transfer to the host */
|
||||
#define ATAPI_INT_REASON_REL 0x04
|
||||
#define ATAPI_INT_REASON_TAG 0xf8
|
||||
|
||||
/* same constants as bochs */
|
||||
#define ASC_ILLEGAL_OPCODE 0x20
|
||||
#define ASC_LOGICAL_BLOCK_OOR 0x21
|
||||
#define ASC_INV_FIELD_IN_CMD_PACKET 0x24
|
||||
#define ASC_MEDIUM_MAY_HAVE_CHANGED 0x28
|
||||
#define ASC_INCOMPATIBLE_FORMAT 0x30
|
||||
#define ASC_MEDIUM_NOT_PRESENT 0x3a
|
||||
#define ASC_SAVING_PARAMETERS_NOT_SUPPORTED 0x39
|
||||
#define ASC_MEDIA_REMOVAL_PREVENTED 0x53
|
||||
|
||||
#define CFA_NO_ERROR 0x00
|
||||
#define CFA_MISC_ERROR 0x09
|
||||
#define CFA_INVALID_COMMAND 0x20
|
||||
#define CFA_INVALID_ADDRESS 0x21
|
||||
#define CFA_ADDRESS_OVERFLOW 0x2f
|
||||
|
||||
#define SENSE_NONE 0
|
||||
#define SENSE_NOT_READY 2
|
||||
#define SENSE_ILLEGAL_REQUEST 5
|
||||
#define SENSE_UNIT_ATTENTION 6
|
||||
|
||||
#define SMART_READ_DATA 0xd0
|
||||
#define SMART_READ_THRESH 0xd1
|
||||
#define SMART_ATTR_AUTOSAVE 0xd2
|
||||
#define SMART_SAVE_ATTR 0xd3
|
||||
#define SMART_EXECUTE_OFFLINE 0xd4
|
||||
#define SMART_READ_LOG 0xd5
|
||||
#define SMART_WRITE_LOG 0xd6
|
||||
#define SMART_ENABLE 0xd8
|
||||
#define SMART_DISABLE 0xd9
|
||||
#define SMART_STATUS 0xda
|
||||
|
||||
typedef void EndTransferFunc(IDEState *);
|
||||
|
||||
/* NOTE: IDEState represents in fact one drive */
|
||||
struct IDEState {
|
||||
IDEBus *bus;
|
||||
uint8_t unit;
|
||||
/* ide config */
|
||||
int is_cdrom;
|
||||
int is_cf;
|
||||
int cylinders, heads, sectors;
|
||||
int64_t nb_sectors;
|
||||
int mult_sectors;
|
||||
int identify_set;
|
||||
uint16_t identify_data[256];
|
||||
qemu_irq irq;
|
||||
int drive_serial;
|
||||
char drive_serial_str[21];
|
||||
/* ide regs */
|
||||
uint8_t feature;
|
||||
uint8_t error;
|
||||
uint32_t nsector;
|
||||
uint8_t sector;
|
||||
uint8_t lcyl;
|
||||
uint8_t hcyl;
|
||||
/* other part of tf for lba48 support */
|
||||
uint8_t hob_feature;
|
||||
uint8_t hob_nsector;
|
||||
uint8_t hob_sector;
|
||||
uint8_t hob_lcyl;
|
||||
uint8_t hob_hcyl;
|
||||
|
||||
uint8_t select;
|
||||
uint8_t status;
|
||||
|
||||
/* 0x3f6 command, only meaningful for drive 0 */
|
||||
uint8_t cmd;
|
||||
/* set for lba48 access */
|
||||
uint8_t lba48;
|
||||
BlockDriverState *bs;
|
||||
/* ATAPI specific */
|
||||
uint8_t sense_key;
|
||||
uint8_t asc;
|
||||
uint8_t cdrom_changed;
|
||||
int packet_transfer_size;
|
||||
int elementary_transfer_size;
|
||||
int io_buffer_index;
|
||||
int lba;
|
||||
int cd_sector_size;
|
||||
int atapi_dma; /* true if dma is requested for the packet cmd */
|
||||
/* ATA DMA state */
|
||||
int io_buffer_size;
|
||||
QEMUSGList sg;
|
||||
/* PIO transfer handling */
|
||||
int req_nb_sectors; /* number of sectors per interrupt */
|
||||
EndTransferFunc *end_transfer_func;
|
||||
uint8_t *data_ptr;
|
||||
uint8_t *data_end;
|
||||
uint8_t *io_buffer;
|
||||
QEMUTimer *sector_write_timer; /* only used for win2k install hack */
|
||||
uint32_t irq_count; /* counts IRQs when using win2k install hack */
|
||||
/* CF-ATA extended error */
|
||||
uint8_t ext_error;
|
||||
/* CF-ATA metadata storage */
|
||||
uint32_t mdata_size;
|
||||
uint8_t *mdata_storage;
|
||||
int media_changed;
|
||||
/* for pmac */
|
||||
int is_read;
|
||||
/* SMART */
|
||||
uint8_t smart_enabled;
|
||||
uint8_t smart_autosave;
|
||||
int smart_errors;
|
||||
uint8_t smart_selftest_count;
|
||||
uint8_t *smart_selftest_data;
|
||||
};
|
||||
|
||||
struct IDEBus {
|
||||
BusState qbus;
|
||||
BMDMAState *bmdma;
|
||||
IDEState ifs[2];
|
||||
uint8_t unit;
|
||||
};
|
||||
|
||||
#define BM_STATUS_DMAING 0x01
|
||||
#define BM_STATUS_ERROR 0x02
|
||||
#define BM_STATUS_INT 0x04
|
||||
#define BM_STATUS_DMA_RETRY 0x08
|
||||
#define BM_STATUS_PIO_RETRY 0x10
|
||||
|
||||
#define BM_CMD_START 0x01
|
||||
#define BM_CMD_READ 0x08
|
||||
|
||||
struct BMDMAState {
|
||||
uint8_t cmd;
|
||||
uint8_t status;
|
||||
uint32_t addr;
|
||||
|
||||
struct PCIIDEState *pci_dev;
|
||||
IDEBus *bus;
|
||||
/* current transfer state */
|
||||
uint32_t cur_addr;
|
||||
uint32_t cur_prd_last;
|
||||
uint32_t cur_prd_addr;
|
||||
uint32_t cur_prd_len;
|
||||
uint8_t unit;
|
||||
BlockDriverCompletionFunc *dma_cb;
|
||||
BlockDriverAIOCB *aiocb;
|
||||
struct iovec iov;
|
||||
QEMUIOVector qiov;
|
||||
int64_t sector_num;
|
||||
uint32_t nsector;
|
||||
QEMUBH *bh;
|
||||
};
|
||||
|
||||
static inline IDEState *idebus_active_if(IDEBus *bus)
|
||||
{
|
||||
return bus->ifs + bus->unit;
|
||||
}
|
||||
|
||||
static inline IDEState *bmdma_active_if(BMDMAState *bmdma)
|
||||
{
|
||||
assert(bmdma->unit != -1);
|
||||
return bmdma->bus->ifs + bmdma->unit;
|
||||
}
|
||||
|
||||
static inline void ide_set_irq(IDEState *s)
|
||||
{
|
||||
BMDMAState *bm = s->bus->bmdma;
|
||||
if (!(s->cmd & IDE_CMD_DISABLE_IRQ)) {
|
||||
if (bm) {
|
||||
bm->status |= BM_STATUS_INT;
|
||||
}
|
||||
qemu_irq_raise(s->irq);
|
||||
}
|
||||
}
|
||||
|
||||
/* ide.c */
|
||||
void ide_save(QEMUFile* f, IDEState *s);
|
||||
void ide_load(QEMUFile* f, IDEState *s, int version_id);
|
||||
void idebus_save(QEMUFile* f, IDEBus *bus);
|
||||
void idebus_load(QEMUFile* f, IDEBus *bus, int version_id);
|
||||
|
||||
void ide_reset(IDEState *s);
|
||||
int64_t ide_get_sector(IDEState *s);
|
||||
void ide_set_sector(IDEState *s, int64_t sector_num);
|
||||
|
||||
void ide_dma_cancel(BMDMAState *bm);
|
||||
void ide_dma_restart_cb(void *opaque, int running, int reason);
|
||||
void ide_dma_error(IDEState *s);
|
||||
|
||||
void ide_atapi_cmd_ok(IDEState *s);
|
||||
void ide_atapi_cmd_error(IDEState *s, int sense_key, int asc);
|
||||
void ide_atapi_io_error(IDEState *s, int ret);
|
||||
|
||||
void ide_ioport_write(void *opaque, uint32_t addr, uint32_t val);
|
||||
uint32_t ide_ioport_read(void *opaque, uint32_t addr1);
|
||||
uint32_t ide_status_read(void *opaque, uint32_t addr);
|
||||
void ide_cmd_write(void *opaque, uint32_t addr, uint32_t val);
|
||||
void ide_data_writew(void *opaque, uint32_t addr, uint32_t val);
|
||||
uint32_t ide_data_readw(void *opaque, uint32_t addr);
|
||||
void ide_data_writel(void *opaque, uint32_t addr, uint32_t val);
|
||||
uint32_t ide_data_readl(void *opaque, uint32_t addr);
|
||||
|
||||
void ide_init2(IDEBus *bus, BlockDriverState *hd0, BlockDriverState *hd1,
|
||||
qemu_irq irq);
|
||||
void ide_init_ioport(IDEBus *bus, int iobase, int iobase2);
|
||||
|
||||
#endif /* HW_IDE_INTERNAL_H */
|
||||
553
hw/ide.c
553
hw/ide.c
@ -35,357 +35,7 @@
|
||||
#include "mac_dbdma.h"
|
||||
#include "sh.h"
|
||||
#include "dma.h"
|
||||
|
||||
typedef struct IDEBus IDEBus;
|
||||
typedef struct IDEState IDEState;
|
||||
typedef struct BMDMAState BMDMAState;
|
||||
|
||||
/* debug IDE devices */
|
||||
//#define DEBUG_IDE
|
||||
//#define DEBUG_IDE_ATAPI
|
||||
//#define DEBUG_AIO
|
||||
#define USE_DMA_CDROM
|
||||
|
||||
/* Bits of HD_STATUS */
|
||||
#define ERR_STAT 0x01
|
||||
#define INDEX_STAT 0x02
|
||||
#define ECC_STAT 0x04 /* Corrected error */
|
||||
#define DRQ_STAT 0x08
|
||||
#define SEEK_STAT 0x10
|
||||
#define SRV_STAT 0x10
|
||||
#define WRERR_STAT 0x20
|
||||
#define READY_STAT 0x40
|
||||
#define BUSY_STAT 0x80
|
||||
|
||||
/* Bits for HD_ERROR */
|
||||
#define MARK_ERR 0x01 /* Bad address mark */
|
||||
#define TRK0_ERR 0x02 /* couldn't find track 0 */
|
||||
#define ABRT_ERR 0x04 /* Command aborted */
|
||||
#define MCR_ERR 0x08 /* media change request */
|
||||
#define ID_ERR 0x10 /* ID field not found */
|
||||
#define MC_ERR 0x20 /* media changed */
|
||||
#define ECC_ERR 0x40 /* Uncorrectable ECC error */
|
||||
#define BBD_ERR 0x80 /* pre-EIDE meaning: block marked bad */
|
||||
#define ICRC_ERR 0x80 /* new meaning: CRC error during transfer */
|
||||
|
||||
/* Bits of HD_NSECTOR */
|
||||
#define CD 0x01
|
||||
#define IO 0x02
|
||||
#define REL 0x04
|
||||
#define TAG_MASK 0xf8
|
||||
|
||||
#define IDE_CMD_RESET 0x04
|
||||
#define IDE_CMD_DISABLE_IRQ 0x02
|
||||
|
||||
/* ATA/ATAPI Commands pre T13 Spec */
|
||||
#define WIN_NOP 0x00
|
||||
/*
|
||||
* 0x01->0x02 Reserved
|
||||
*/
|
||||
#define CFA_REQ_EXT_ERROR_CODE 0x03 /* CFA Request Extended Error Code */
|
||||
/*
|
||||
* 0x04->0x07 Reserved
|
||||
*/
|
||||
#define WIN_SRST 0x08 /* ATAPI soft reset command */
|
||||
#define WIN_DEVICE_RESET 0x08
|
||||
/*
|
||||
* 0x09->0x0F Reserved
|
||||
*/
|
||||
#define WIN_RECAL 0x10
|
||||
#define WIN_RESTORE WIN_RECAL
|
||||
/*
|
||||
* 0x10->0x1F Reserved
|
||||
*/
|
||||
#define WIN_READ 0x20 /* 28-Bit */
|
||||
#define WIN_READ_ONCE 0x21 /* 28-Bit without retries */
|
||||
#define WIN_READ_LONG 0x22 /* 28-Bit */
|
||||
#define WIN_READ_LONG_ONCE 0x23 /* 28-Bit without retries */
|
||||
#define WIN_READ_EXT 0x24 /* 48-Bit */
|
||||
#define WIN_READDMA_EXT 0x25 /* 48-Bit */
|
||||
#define WIN_READDMA_QUEUED_EXT 0x26 /* 48-Bit */
|
||||
#define WIN_READ_NATIVE_MAX_EXT 0x27 /* 48-Bit */
|
||||
/*
|
||||
* 0x28
|
||||
*/
|
||||
#define WIN_MULTREAD_EXT 0x29 /* 48-Bit */
|
||||
/*
|
||||
* 0x2A->0x2F Reserved
|
||||
*/
|
||||
#define WIN_WRITE 0x30 /* 28-Bit */
|
||||
#define WIN_WRITE_ONCE 0x31 /* 28-Bit without retries */
|
||||
#define WIN_WRITE_LONG 0x32 /* 28-Bit */
|
||||
#define WIN_WRITE_LONG_ONCE 0x33 /* 28-Bit without retries */
|
||||
#define WIN_WRITE_EXT 0x34 /* 48-Bit */
|
||||
#define WIN_WRITEDMA_EXT 0x35 /* 48-Bit */
|
||||
#define WIN_WRITEDMA_QUEUED_EXT 0x36 /* 48-Bit */
|
||||
#define WIN_SET_MAX_EXT 0x37 /* 48-Bit */
|
||||
#define CFA_WRITE_SECT_WO_ERASE 0x38 /* CFA Write Sectors without erase */
|
||||
#define WIN_MULTWRITE_EXT 0x39 /* 48-Bit */
|
||||
/*
|
||||
* 0x3A->0x3B Reserved
|
||||
*/
|
||||
#define WIN_WRITE_VERIFY 0x3C /* 28-Bit */
|
||||
/*
|
||||
* 0x3D->0x3F Reserved
|
||||
*/
|
||||
#define WIN_VERIFY 0x40 /* 28-Bit - Read Verify Sectors */
|
||||
#define WIN_VERIFY_ONCE 0x41 /* 28-Bit - without retries */
|
||||
#define WIN_VERIFY_EXT 0x42 /* 48-Bit */
|
||||
/*
|
||||
* 0x43->0x4F Reserved
|
||||
*/
|
||||
#define WIN_FORMAT 0x50
|
||||
/*
|
||||
* 0x51->0x5F Reserved
|
||||
*/
|
||||
#define WIN_INIT 0x60
|
||||
/*
|
||||
* 0x61->0x5F Reserved
|
||||
*/
|
||||
#define WIN_SEEK 0x70 /* 0x70-0x7F Reserved */
|
||||
#define CFA_TRANSLATE_SECTOR 0x87 /* CFA Translate Sector */
|
||||
#define WIN_DIAGNOSE 0x90
|
||||
#define WIN_SPECIFY 0x91 /* set drive geometry translation */
|
||||
#define WIN_DOWNLOAD_MICROCODE 0x92
|
||||
#define WIN_STANDBYNOW2 0x94
|
||||
#define CFA_IDLEIMMEDIATE 0x95 /* force drive to become "ready" */
|
||||
#define WIN_STANDBY2 0x96
|
||||
#define WIN_SETIDLE2 0x97
|
||||
#define WIN_CHECKPOWERMODE2 0x98
|
||||
#define WIN_SLEEPNOW2 0x99
|
||||
/*
|
||||
* 0x9A VENDOR
|
||||
*/
|
||||
#define WIN_PACKETCMD 0xA0 /* Send a packet command. */
|
||||
#define WIN_PIDENTIFY 0xA1 /* identify ATAPI device */
|
||||
#define WIN_QUEUED_SERVICE 0xA2
|
||||
#define WIN_SMART 0xB0 /* self-monitoring and reporting */
|
||||
#define CFA_ACCESS_METADATA_STORAGE 0xB8
|
||||
#define CFA_ERASE_SECTORS 0xC0 /* microdrives implement as NOP */
|
||||
#define WIN_MULTREAD 0xC4 /* read sectors using multiple mode*/
|
||||
#define WIN_MULTWRITE 0xC5 /* write sectors using multiple mode */
|
||||
#define WIN_SETMULT 0xC6 /* enable/disable multiple mode */
|
||||
#define WIN_READDMA_QUEUED 0xC7 /* read sectors using Queued DMA transfers */
|
||||
#define WIN_READDMA 0xC8 /* read sectors using DMA transfers */
|
||||
#define WIN_READDMA_ONCE 0xC9 /* 28-Bit - without retries */
|
||||
#define WIN_WRITEDMA 0xCA /* write sectors using DMA transfers */
|
||||
#define WIN_WRITEDMA_ONCE 0xCB /* 28-Bit - without retries */
|
||||
#define WIN_WRITEDMA_QUEUED 0xCC /* write sectors using Queued DMA transfers */
|
||||
#define CFA_WRITE_MULTI_WO_ERASE 0xCD /* CFA Write multiple without erase */
|
||||
#define WIN_GETMEDIASTATUS 0xDA
|
||||
#define WIN_ACKMEDIACHANGE 0xDB /* ATA-1, ATA-2 vendor */
|
||||
#define WIN_POSTBOOT 0xDC
|
||||
#define WIN_PREBOOT 0xDD
|
||||
#define WIN_DOORLOCK 0xDE /* lock door on removable drives */
|
||||
#define WIN_DOORUNLOCK 0xDF /* unlock door on removable drives */
|
||||
#define WIN_STANDBYNOW1 0xE0
|
||||
#define WIN_IDLEIMMEDIATE 0xE1 /* force drive to become "ready" */
|
||||
#define WIN_STANDBY 0xE2 /* Set device in Standby Mode */
|
||||
#define WIN_SETIDLE1 0xE3
|
||||
#define WIN_READ_BUFFER 0xE4 /* force read only 1 sector */
|
||||
#define WIN_CHECKPOWERMODE1 0xE5
|
||||
#define WIN_SLEEPNOW1 0xE6
|
||||
#define WIN_FLUSH_CACHE 0xE7
|
||||
#define WIN_WRITE_BUFFER 0xE8 /* force write only 1 sector */
|
||||
#define WIN_WRITE_SAME 0xE9 /* read ata-2 to use */
|
||||
/* SET_FEATURES 0x22 or 0xDD */
|
||||
#define WIN_FLUSH_CACHE_EXT 0xEA /* 48-Bit */
|
||||
#define WIN_IDENTIFY 0xEC /* ask drive to identify itself */
|
||||
#define WIN_MEDIAEJECT 0xED
|
||||
#define WIN_IDENTIFY_DMA 0xEE /* same as WIN_IDENTIFY, but DMA */
|
||||
#define WIN_SETFEATURES 0xEF /* set special drive features */
|
||||
#define EXABYTE_ENABLE_NEST 0xF0
|
||||
#define IBM_SENSE_CONDITION 0xF0 /* measure disk temperature */
|
||||
#define WIN_SECURITY_SET_PASS 0xF1
|
||||
#define WIN_SECURITY_UNLOCK 0xF2
|
||||
#define WIN_SECURITY_ERASE_PREPARE 0xF3
|
||||
#define WIN_SECURITY_ERASE_UNIT 0xF4
|
||||
#define WIN_SECURITY_FREEZE_LOCK 0xF5
|
||||
#define CFA_WEAR_LEVEL 0xF5 /* microdrives implement as NOP */
|
||||
#define WIN_SECURITY_DISABLE 0xF6
|
||||
#define WIN_READ_NATIVE_MAX 0xF8 /* return the native maximum address */
|
||||
#define WIN_SET_MAX 0xF9
|
||||
#define DISABLE_SEAGATE 0xFB
|
||||
|
||||
/* set to 1 set disable mult support */
|
||||
#define MAX_MULT_SECTORS 16
|
||||
|
||||
#define IDE_DMA_BUF_SECTORS 256
|
||||
|
||||
#if (IDE_DMA_BUF_SECTORS < MAX_MULT_SECTORS)
|
||||
#error "IDE_DMA_BUF_SECTORS must be bigger or equal to MAX_MULT_SECTORS"
|
||||
#endif
|
||||
|
||||
/* ATAPI defines */
|
||||
|
||||
#define ATAPI_PACKET_SIZE 12
|
||||
|
||||
/* The generic packet command opcodes for CD/DVD Logical Units,
|
||||
* From Table 57 of the SFF8090 Ver. 3 (Mt. Fuji) draft standard. */
|
||||
#define GPCMD_BLANK 0xa1
|
||||
#define GPCMD_CLOSE_TRACK 0x5b
|
||||
#define GPCMD_FLUSH_CACHE 0x35
|
||||
#define GPCMD_FORMAT_UNIT 0x04
|
||||
#define GPCMD_GET_CONFIGURATION 0x46
|
||||
#define GPCMD_GET_EVENT_STATUS_NOTIFICATION 0x4a
|
||||
#define GPCMD_GET_PERFORMANCE 0xac
|
||||
#define GPCMD_INQUIRY 0x12
|
||||
#define GPCMD_LOAD_UNLOAD 0xa6
|
||||
#define GPCMD_MECHANISM_STATUS 0xbd
|
||||
#define GPCMD_MODE_SELECT_10 0x55
|
||||
#define GPCMD_MODE_SENSE_10 0x5a
|
||||
#define GPCMD_PAUSE_RESUME 0x4b
|
||||
#define GPCMD_PLAY_AUDIO_10 0x45
|
||||
#define GPCMD_PLAY_AUDIO_MSF 0x47
|
||||
#define GPCMD_PLAY_AUDIO_TI 0x48
|
||||
#define GPCMD_PLAY_CD 0xbc
|
||||
#define GPCMD_PREVENT_ALLOW_MEDIUM_REMOVAL 0x1e
|
||||
#define GPCMD_READ_10 0x28
|
||||
#define GPCMD_READ_12 0xa8
|
||||
#define GPCMD_READ_CDVD_CAPACITY 0x25
|
||||
#define GPCMD_READ_CD 0xbe
|
||||
#define GPCMD_READ_CD_MSF 0xb9
|
||||
#define GPCMD_READ_DISC_INFO 0x51
|
||||
#define GPCMD_READ_DVD_STRUCTURE 0xad
|
||||
#define GPCMD_READ_FORMAT_CAPACITIES 0x23
|
||||
#define GPCMD_READ_HEADER 0x44
|
||||
#define GPCMD_READ_TRACK_RZONE_INFO 0x52
|
||||
#define GPCMD_READ_SUBCHANNEL 0x42
|
||||
#define GPCMD_READ_TOC_PMA_ATIP 0x43
|
||||
#define GPCMD_REPAIR_RZONE_TRACK 0x58
|
||||
#define GPCMD_REPORT_KEY 0xa4
|
||||
#define GPCMD_REQUEST_SENSE 0x03
|
||||
#define GPCMD_RESERVE_RZONE_TRACK 0x53
|
||||
#define GPCMD_SCAN 0xba
|
||||
#define GPCMD_SEEK 0x2b
|
||||
#define GPCMD_SEND_DVD_STRUCTURE 0xad
|
||||
#define GPCMD_SEND_EVENT 0xa2
|
||||
#define GPCMD_SEND_KEY 0xa3
|
||||
#define GPCMD_SEND_OPC 0x54
|
||||
#define GPCMD_SET_READ_AHEAD 0xa7
|
||||
#define GPCMD_SET_STREAMING 0xb6
|
||||
#define GPCMD_START_STOP_UNIT 0x1b
|
||||
#define GPCMD_STOP_PLAY_SCAN 0x4e
|
||||
#define GPCMD_TEST_UNIT_READY 0x00
|
||||
#define GPCMD_VERIFY_10 0x2f
|
||||
#define GPCMD_WRITE_10 0x2a
|
||||
#define GPCMD_WRITE_AND_VERIFY_10 0x2e
|
||||
/* This is listed as optional in ATAPI 2.6, but is (curiously)
|
||||
* missing from Mt. Fuji, Table 57. It _is_ mentioned in Mt. Fuji
|
||||
* Table 377 as an MMC command for SCSi devices though... Most ATAPI
|
||||
* drives support it. */
|
||||
#define GPCMD_SET_SPEED 0xbb
|
||||
/* This seems to be a SCSI specific CD-ROM opcode
|
||||
* to play data at track/index */
|
||||
#define GPCMD_PLAYAUDIO_TI 0x48
|
||||
/*
|
||||
* From MS Media Status Notification Support Specification. For
|
||||
* older drives only.
|
||||
*/
|
||||
#define GPCMD_GET_MEDIA_STATUS 0xda
|
||||
#define GPCMD_MODE_SENSE_6 0x1a
|
||||
|
||||
/* Mode page codes for mode sense/set */
|
||||
#define GPMODE_R_W_ERROR_PAGE 0x01
|
||||
#define GPMODE_WRITE_PARMS_PAGE 0x05
|
||||
#define GPMODE_AUDIO_CTL_PAGE 0x0e
|
||||
#define GPMODE_POWER_PAGE 0x1a
|
||||
#define GPMODE_FAULT_FAIL_PAGE 0x1c
|
||||
#define GPMODE_TO_PROTECT_PAGE 0x1d
|
||||
#define GPMODE_CAPABILITIES_PAGE 0x2a
|
||||
#define GPMODE_ALL_PAGES 0x3f
|
||||
/* Not in Mt. Fuji, but in ATAPI 2.6 -- depricated now in favor
|
||||
* of MODE_SENSE_POWER_PAGE */
|
||||
#define GPMODE_CDROM_PAGE 0x0d
|
||||
|
||||
/*
|
||||
* Based on values from <linux/cdrom.h> but extending CD_MINS
|
||||
* to the maximum common size allowed by the Orange's Book ATIP
|
||||
*
|
||||
* 90 and 99 min CDs are also available but using them as the
|
||||
* upper limit reduces the effectiveness of the heuristic to
|
||||
* detect DVDs burned to less than 25% of their maximum capacity
|
||||
*/
|
||||
|
||||
/* Some generally useful CD-ROM information */
|
||||
#define CD_MINS 80 /* max. minutes per CD */
|
||||
#define CD_SECS 60 /* seconds per minute */
|
||||
#define CD_FRAMES 75 /* frames per second */
|
||||
#define CD_FRAMESIZE 2048 /* bytes per frame, "cooked" mode */
|
||||
#define CD_MAX_BYTES (CD_MINS * CD_SECS * CD_FRAMES * CD_FRAMESIZE)
|
||||
#define CD_MAX_SECTORS (CD_MAX_BYTES / 512)
|
||||
|
||||
/*
|
||||
* The MMC values are not IDE specific and might need to be moved
|
||||
* to a common header if they are also needed for the SCSI emulation
|
||||
*/
|
||||
|
||||
/* Profile list from MMC-6 revision 1 table 91 */
|
||||
#define MMC_PROFILE_NONE 0x0000
|
||||
#define MMC_PROFILE_CD_ROM 0x0008
|
||||
#define MMC_PROFILE_CD_R 0x0009
|
||||
#define MMC_PROFILE_CD_RW 0x000A
|
||||
#define MMC_PROFILE_DVD_ROM 0x0010
|
||||
#define MMC_PROFILE_DVD_R_SR 0x0011
|
||||
#define MMC_PROFILE_DVD_RAM 0x0012
|
||||
#define MMC_PROFILE_DVD_RW_RO 0x0013
|
||||
#define MMC_PROFILE_DVD_RW_SR 0x0014
|
||||
#define MMC_PROFILE_DVD_R_DL_SR 0x0015
|
||||
#define MMC_PROFILE_DVD_R_DL_JR 0x0016
|
||||
#define MMC_PROFILE_DVD_RW_DL 0x0017
|
||||
#define MMC_PROFILE_DVD_DDR 0x0018
|
||||
#define MMC_PROFILE_DVD_PLUS_RW 0x001A
|
||||
#define MMC_PROFILE_DVD_PLUS_R 0x001B
|
||||
#define MMC_PROFILE_DVD_PLUS_RW_DL 0x002A
|
||||
#define MMC_PROFILE_DVD_PLUS_R_DL 0x002B
|
||||
#define MMC_PROFILE_BD_ROM 0x0040
|
||||
#define MMC_PROFILE_BD_R_SRM 0x0041
|
||||
#define MMC_PROFILE_BD_R_RRM 0x0042
|
||||
#define MMC_PROFILE_BD_RE 0x0043
|
||||
#define MMC_PROFILE_HDDVD_ROM 0x0050
|
||||
#define MMC_PROFILE_HDDVD_R 0x0051
|
||||
#define MMC_PROFILE_HDDVD_RAM 0x0052
|
||||
#define MMC_PROFILE_HDDVD_RW 0x0053
|
||||
#define MMC_PROFILE_HDDVD_R_DL 0x0058
|
||||
#define MMC_PROFILE_HDDVD_RW_DL 0x005A
|
||||
#define MMC_PROFILE_INVALID 0xFFFF
|
||||
|
||||
#define ATAPI_INT_REASON_CD 0x01 /* 0 = data transfer */
|
||||
#define ATAPI_INT_REASON_IO 0x02 /* 1 = transfer to the host */
|
||||
#define ATAPI_INT_REASON_REL 0x04
|
||||
#define ATAPI_INT_REASON_TAG 0xf8
|
||||
|
||||
/* same constants as bochs */
|
||||
#define ASC_ILLEGAL_OPCODE 0x20
|
||||
#define ASC_LOGICAL_BLOCK_OOR 0x21
|
||||
#define ASC_INV_FIELD_IN_CMD_PACKET 0x24
|
||||
#define ASC_MEDIUM_MAY_HAVE_CHANGED 0x28
|
||||
#define ASC_INCOMPATIBLE_FORMAT 0x30
|
||||
#define ASC_MEDIUM_NOT_PRESENT 0x3a
|
||||
#define ASC_SAVING_PARAMETERS_NOT_SUPPORTED 0x39
|
||||
#define ASC_MEDIA_REMOVAL_PREVENTED 0x53
|
||||
|
||||
#define CFA_NO_ERROR 0x00
|
||||
#define CFA_MISC_ERROR 0x09
|
||||
#define CFA_INVALID_COMMAND 0x20
|
||||
#define CFA_INVALID_ADDRESS 0x21
|
||||
#define CFA_ADDRESS_OVERFLOW 0x2f
|
||||
|
||||
#define SENSE_NONE 0
|
||||
#define SENSE_NOT_READY 2
|
||||
#define SENSE_ILLEGAL_REQUEST 5
|
||||
#define SENSE_UNIT_ATTENTION 6
|
||||
|
||||
#define SMART_READ_DATA 0xd0
|
||||
#define SMART_READ_THRESH 0xd1
|
||||
#define SMART_ATTR_AUTOSAVE 0xd2
|
||||
#define SMART_SAVE_ATTR 0xd3
|
||||
#define SMART_EXECUTE_OFFLINE 0xd4
|
||||
#define SMART_READ_LOG 0xd5
|
||||
#define SMART_WRITE_LOG 0xd6
|
||||
#define SMART_ENABLE 0xd8
|
||||
#define SMART_DISABLE 0xd9
|
||||
#define SMART_STATUS 0xda
|
||||
#include "ide-internal.h"
|
||||
|
||||
static int smart_attributes[][5] = {
|
||||
/* id, flags, val, wrst, thrsh */
|
||||
@ -396,91 +46,6 @@ static int smart_attributes[][5] = {
|
||||
{ 0x00, 0x00, 0x00, 0x00, 0x00}
|
||||
};
|
||||
|
||||
|
||||
|
||||
typedef void EndTransferFunc(IDEState *);
|
||||
|
||||
/* NOTE: IDEState represents in fact one drive */
|
||||
struct IDEState {
|
||||
IDEBus *bus;
|
||||
uint8_t unit;
|
||||
/* ide config */
|
||||
int is_cdrom;
|
||||
int is_cf;
|
||||
int cylinders, heads, sectors;
|
||||
int64_t nb_sectors;
|
||||
int mult_sectors;
|
||||
int identify_set;
|
||||
uint16_t identify_data[256];
|
||||
qemu_irq irq;
|
||||
int drive_serial;
|
||||
char drive_serial_str[21];
|
||||
/* ide regs */
|
||||
uint8_t feature;
|
||||
uint8_t error;
|
||||
uint32_t nsector;
|
||||
uint8_t sector;
|
||||
uint8_t lcyl;
|
||||
uint8_t hcyl;
|
||||
/* other part of tf for lba48 support */
|
||||
uint8_t hob_feature;
|
||||
uint8_t hob_nsector;
|
||||
uint8_t hob_sector;
|
||||
uint8_t hob_lcyl;
|
||||
uint8_t hob_hcyl;
|
||||
|
||||
uint8_t select;
|
||||
uint8_t status;
|
||||
|
||||
/* 0x3f6 command, only meaningful for drive 0 */
|
||||
uint8_t cmd;
|
||||
/* set for lba48 access */
|
||||
uint8_t lba48;
|
||||
BlockDriverState *bs;
|
||||
/* ATAPI specific */
|
||||
uint8_t sense_key;
|
||||
uint8_t asc;
|
||||
uint8_t cdrom_changed;
|
||||
int packet_transfer_size;
|
||||
int elementary_transfer_size;
|
||||
int io_buffer_index;
|
||||
int lba;
|
||||
int cd_sector_size;
|
||||
int atapi_dma; /* true if dma is requested for the packet cmd */
|
||||
/* ATA DMA state */
|
||||
int io_buffer_size;
|
||||
QEMUSGList sg;
|
||||
/* PIO transfer handling */
|
||||
int req_nb_sectors; /* number of sectors per interrupt */
|
||||
EndTransferFunc *end_transfer_func;
|
||||
uint8_t *data_ptr;
|
||||
uint8_t *data_end;
|
||||
uint8_t *io_buffer;
|
||||
QEMUTimer *sector_write_timer; /* only used for win2k install hack */
|
||||
uint32_t irq_count; /* counts IRQs when using win2k install hack */
|
||||
/* CF-ATA extended error */
|
||||
uint8_t ext_error;
|
||||
/* CF-ATA metadata storage */
|
||||
uint32_t mdata_size;
|
||||
uint8_t *mdata_storage;
|
||||
int media_changed;
|
||||
/* for pmac */
|
||||
int is_read;
|
||||
/* SMART */
|
||||
uint8_t smart_enabled;
|
||||
uint8_t smart_autosave;
|
||||
int smart_errors;
|
||||
uint8_t smart_selftest_count;
|
||||
uint8_t *smart_selftest_data;
|
||||
};
|
||||
|
||||
struct IDEBus {
|
||||
BusState qbus;
|
||||
BMDMAState *bmdma;
|
||||
IDEState ifs[2];
|
||||
uint8_t unit;
|
||||
};
|
||||
|
||||
/* XXX: DVDs that could fit on a CD will be reported as a CD */
|
||||
static inline int media_present(IDEState *s)
|
||||
{
|
||||
@ -497,49 +62,18 @@ static inline int media_is_cd(IDEState *s)
|
||||
return (media_present(s) && s->nb_sectors <= CD_MAX_SECTORS);
|
||||
}
|
||||
|
||||
#define BM_STATUS_DMAING 0x01
|
||||
#define BM_STATUS_ERROR 0x02
|
||||
#define BM_STATUS_INT 0x04
|
||||
#define BM_STATUS_DMA_RETRY 0x08
|
||||
#define BM_STATUS_PIO_RETRY 0x10
|
||||
|
||||
#define BM_CMD_START 0x01
|
||||
#define BM_CMD_READ 0x08
|
||||
|
||||
#define IDE_TYPE_PIIX3 0
|
||||
#define IDE_TYPE_CMD646 1
|
||||
#define IDE_TYPE_PIIX4 2
|
||||
|
||||
/* CMD646 specific */
|
||||
#define MRDMODE 0x71
|
||||
#define MRDMODE_INTR_CH0 0x04
|
||||
#define MRDMODE_INTR_CH1 0x08
|
||||
#define MRDMODE_BLK_CH0 0x10
|
||||
#define MRDMODE_BLK_CH1 0x20
|
||||
#define UDIDETCR0 0x73
|
||||
#define UDIDETCR1 0x7B
|
||||
|
||||
struct BMDMAState {
|
||||
uint8_t cmd;
|
||||
uint8_t status;
|
||||
uint32_t addr;
|
||||
|
||||
struct PCIIDEState *pci_dev;
|
||||
IDEBus *bus;
|
||||
/* current transfer state */
|
||||
uint32_t cur_addr;
|
||||
uint32_t cur_prd_last;
|
||||
uint32_t cur_prd_addr;
|
||||
uint32_t cur_prd_len;
|
||||
uint8_t unit;
|
||||
BlockDriverCompletionFunc *dma_cb;
|
||||
BlockDriverAIOCB *aiocb;
|
||||
struct iovec iov;
|
||||
QEMUIOVector qiov;
|
||||
int64_t sector_num;
|
||||
uint32_t nsector;
|
||||
QEMUBH *bh;
|
||||
};
|
||||
#define MRDMODE 0x71
|
||||
#define MRDMODE_INTR_CH0 0x04
|
||||
#define MRDMODE_INTR_CH1 0x08
|
||||
#define MRDMODE_BLK_CH0 0x10
|
||||
#define MRDMODE_BLK_CH1 0x20
|
||||
#define UDIDETCR0 0x73
|
||||
#define UDIDETCR1 0x7B
|
||||
|
||||
typedef struct PCIIDEState {
|
||||
PCIDevice dev;
|
||||
@ -548,17 +82,6 @@ typedef struct PCIIDEState {
|
||||
int type; /* see IDE_TYPE_xxx */
|
||||
} PCIIDEState;
|
||||
|
||||
static inline IDEState *bmdma_active_if(BMDMAState *bmdma)
|
||||
{
|
||||
assert(bmdma->unit != -1);
|
||||
return bmdma->bus->ifs + bmdma->unit;
|
||||
}
|
||||
|
||||
static inline IDEState *idebus_active_if(IDEBus *bus)
|
||||
{
|
||||
return bus->ifs + bus->unit;
|
||||
}
|
||||
|
||||
static void ide_dma_start(IDEState *s, BlockDriverCompletionFunc *dma_cb);
|
||||
static void ide_dma_restart(IDEState *s);
|
||||
static void ide_atapi_cmd_read_dma_cb(void *opaque, int ret);
|
||||
@ -810,17 +333,6 @@ static inline void ide_dma_submit_check(IDEState *s,
|
||||
dma_cb(bm, -1);
|
||||
}
|
||||
|
||||
static inline void ide_set_irq(IDEState *s)
|
||||
{
|
||||
BMDMAState *bm = s->bus->bmdma;
|
||||
if (!(s->cmd & IDE_CMD_DISABLE_IRQ)) {
|
||||
if (bm) {
|
||||
bm->status |= BM_STATUS_INT;
|
||||
}
|
||||
qemu_irq_raise(s->irq);
|
||||
}
|
||||
}
|
||||
|
||||
/* prepare data transfer and tell what to do after */
|
||||
static void ide_transfer_start(IDEState *s, uint8_t *buf, int size,
|
||||
EndTransferFunc *end_transfer_func)
|
||||
@ -840,7 +352,7 @@ static void ide_transfer_stop(IDEState *s)
|
||||
s->status &= ~DRQ_STAT;
|
||||
}
|
||||
|
||||
static int64_t ide_get_sector(IDEState *s)
|
||||
int64_t ide_get_sector(IDEState *s)
|
||||
{
|
||||
int64_t sector_num;
|
||||
if (s->select & 0x40) {
|
||||
@ -862,7 +374,7 @@ static int64_t ide_get_sector(IDEState *s)
|
||||
return sector_num;
|
||||
}
|
||||
|
||||
static void ide_set_sector(IDEState *s, int64_t sector_num)
|
||||
void ide_set_sector(IDEState *s, int64_t sector_num)
|
||||
{
|
||||
unsigned int cyl, r;
|
||||
if (s->select & 0x40) {
|
||||
@ -970,7 +482,7 @@ static void dma_buf_commit(IDEState *s, int is_write)
|
||||
qemu_sglist_destroy(&s->sg);
|
||||
}
|
||||
|
||||
static void ide_dma_error(IDEState *s)
|
||||
void ide_dma_error(IDEState *s)
|
||||
{
|
||||
ide_transfer_stop(s);
|
||||
s->error = ABRT_ERR;
|
||||
@ -1178,7 +690,7 @@ static void ide_dma_restart_bh(void *opaque)
|
||||
}
|
||||
}
|
||||
|
||||
static void ide_dma_restart_cb(void *opaque, int running, int reason)
|
||||
void ide_dma_restart_cb(void *opaque, int running, int reason)
|
||||
{
|
||||
BMDMAState *bm = opaque;
|
||||
|
||||
@ -1246,7 +758,7 @@ static void ide_sector_write_dma(IDEState *s)
|
||||
ide_dma_start(s, ide_write_dma_cb);
|
||||
}
|
||||
|
||||
static void ide_atapi_cmd_ok(IDEState *s)
|
||||
void ide_atapi_cmd_ok(IDEState *s)
|
||||
{
|
||||
s->error = 0;
|
||||
s->status = READY_STAT | SEEK_STAT;
|
||||
@ -1254,7 +766,7 @@ static void ide_atapi_cmd_ok(IDEState *s)
|
||||
ide_set_irq(s);
|
||||
}
|
||||
|
||||
static void ide_atapi_cmd_error(IDEState *s, int sense_key, int asc)
|
||||
void ide_atapi_cmd_error(IDEState *s, int sense_key, int asc)
|
||||
{
|
||||
#ifdef DEBUG_IDE_ATAPI
|
||||
printf("atapi_cmd_error: sense=0x%x asc=0x%x\n", sense_key, asc);
|
||||
@ -1349,7 +861,7 @@ static int cd_read_sector(BlockDriverState *bs, int lba, uint8_t *buf,
|
||||
return ret;
|
||||
}
|
||||
|
||||
static void ide_atapi_io_error(IDEState *s, int ret)
|
||||
void ide_atapi_io_error(IDEState *s, int ret)
|
||||
{
|
||||
/* XXX: handle more errors */
|
||||
if (ret == -ENOMEDIUM) {
|
||||
@ -2209,7 +1721,7 @@ static void ide_clear_hob(IDEBus *bus)
|
||||
bus->ifs[1].select &= ~(1 << 7);
|
||||
}
|
||||
|
||||
static void ide_ioport_write(void *opaque, uint32_t addr, uint32_t val)
|
||||
void ide_ioport_write(void *opaque, uint32_t addr, uint32_t val)
|
||||
{
|
||||
IDEBus *bus = opaque;
|
||||
IDEState *s;
|
||||
@ -2781,7 +2293,7 @@ static void ide_ioport_write(void *opaque, uint32_t addr, uint32_t val)
|
||||
}
|
||||
}
|
||||
|
||||
static uint32_t ide_ioport_read(void *opaque, uint32_t addr1)
|
||||
uint32_t ide_ioport_read(void *opaque, uint32_t addr1)
|
||||
{
|
||||
IDEBus *bus = opaque;
|
||||
IDEState *s = idebus_active_if(bus);
|
||||
@ -2859,7 +2371,7 @@ static uint32_t ide_ioport_read(void *opaque, uint32_t addr1)
|
||||
return ret;
|
||||
}
|
||||
|
||||
static uint32_t ide_status_read(void *opaque, uint32_t addr)
|
||||
uint32_t ide_status_read(void *opaque, uint32_t addr)
|
||||
{
|
||||
IDEBus *bus = opaque;
|
||||
IDEState *s = idebus_active_if(bus);
|
||||
@ -2876,7 +2388,7 @@ static uint32_t ide_status_read(void *opaque, uint32_t addr)
|
||||
return ret;
|
||||
}
|
||||
|
||||
static void ide_cmd_write(void *opaque, uint32_t addr, uint32_t val)
|
||||
void ide_cmd_write(void *opaque, uint32_t addr, uint32_t val)
|
||||
{
|
||||
IDEBus *bus = opaque;
|
||||
IDEState *s;
|
||||
@ -2911,7 +2423,7 @@ static void ide_cmd_write(void *opaque, uint32_t addr, uint32_t val)
|
||||
bus->ifs[1].cmd = val;
|
||||
}
|
||||
|
||||
static void ide_data_writew(void *opaque, uint32_t addr, uint32_t val)
|
||||
void ide_data_writew(void *opaque, uint32_t addr, uint32_t val)
|
||||
{
|
||||
IDEBus *bus = opaque;
|
||||
IDEState *s = idebus_active_if(bus);
|
||||
@ -2929,7 +2441,7 @@ static void ide_data_writew(void *opaque, uint32_t addr, uint32_t val)
|
||||
s->end_transfer_func(s);
|
||||
}
|
||||
|
||||
static uint32_t ide_data_readw(void *opaque, uint32_t addr)
|
||||
uint32_t ide_data_readw(void *opaque, uint32_t addr)
|
||||
{
|
||||
IDEBus *bus = opaque;
|
||||
IDEState *s = idebus_active_if(bus);
|
||||
@ -2949,7 +2461,7 @@ static uint32_t ide_data_readw(void *opaque, uint32_t addr)
|
||||
return ret;
|
||||
}
|
||||
|
||||
static void ide_data_writel(void *opaque, uint32_t addr, uint32_t val)
|
||||
void ide_data_writel(void *opaque, uint32_t addr, uint32_t val)
|
||||
{
|
||||
IDEBus *bus = opaque;
|
||||
IDEState *s = idebus_active_if(bus);
|
||||
@ -2967,7 +2479,7 @@ static void ide_data_writel(void *opaque, uint32_t addr, uint32_t val)
|
||||
s->end_transfer_func(s);
|
||||
}
|
||||
|
||||
static uint32_t ide_data_readl(void *opaque, uint32_t addr)
|
||||
uint32_t ide_data_readl(void *opaque, uint32_t addr)
|
||||
{
|
||||
IDEBus *bus = opaque;
|
||||
IDEState *s = idebus_active_if(bus);
|
||||
@ -2997,7 +2509,7 @@ static void ide_dummy_transfer_stop(IDEState *s)
|
||||
s->io_buffer[3] = 0xff;
|
||||
}
|
||||
|
||||
static void ide_reset(IDEState *s)
|
||||
void ide_reset(IDEState *s)
|
||||
{
|
||||
IDEBus *bus = s->bus;
|
||||
|
||||
@ -3016,9 +2528,8 @@ static void ide_reset(IDEState *s)
|
||||
s->media_changed = 0;
|
||||
}
|
||||
|
||||
static void ide_init2(IDEBus *bus,
|
||||
BlockDriverState *hd0, BlockDriverState *hd1,
|
||||
qemu_irq irq)
|
||||
void ide_init2(IDEBus *bus, BlockDriverState *hd0, BlockDriverState *hd1,
|
||||
qemu_irq irq)
|
||||
{
|
||||
IDEState *s;
|
||||
static int drive_serial = 1;
|
||||
@ -3063,7 +2574,7 @@ static void ide_init2(IDEBus *bus,
|
||||
}
|
||||
}
|
||||
|
||||
static void ide_init_ioport(IDEBus *bus, int iobase, int iobase2)
|
||||
void ide_init_ioport(IDEBus *bus, int iobase, int iobase2)
|
||||
{
|
||||
register_ioport_write(iobase, 8, 1, ide_ioport_write, bus);
|
||||
register_ioport_read(iobase, 8, 1, ide_ioport_read, bus);
|
||||
@ -3080,7 +2591,7 @@ static void ide_init_ioport(IDEBus *bus, int iobase, int iobase2)
|
||||
}
|
||||
|
||||
/* save per IDE drive data */
|
||||
static void ide_save(QEMUFile* f, IDEState *s)
|
||||
void ide_save(QEMUFile* f, IDEState *s)
|
||||
{
|
||||
qemu_put_be32(f, s->mult_sectors);
|
||||
qemu_put_be32(f, s->identify_set);
|
||||
@ -3109,7 +2620,7 @@ static void ide_save(QEMUFile* f, IDEState *s)
|
||||
}
|
||||
|
||||
/* load per IDE drive data */
|
||||
static void ide_load(QEMUFile* f, IDEState *s, int version_id)
|
||||
void ide_load(QEMUFile* f, IDEState *s, int version_id)
|
||||
{
|
||||
s->mult_sectors=qemu_get_be32(f);
|
||||
s->identify_set=qemu_get_be32(f);
|
||||
@ -3143,14 +2654,14 @@ static void ide_load(QEMUFile* f, IDEState *s, int version_id)
|
||||
/* XXX: if a transfer is pending, we do not save it yet */
|
||||
}
|
||||
|
||||
static void idebus_save(QEMUFile* f, IDEBus *bus)
|
||||
void idebus_save(QEMUFile* f, IDEBus *bus)
|
||||
{
|
||||
IDEState *s = idebus_active_if(bus);
|
||||
qemu_put_8s(f, &s->cmd);
|
||||
qemu_put_8s(f, &bus->unit);
|
||||
}
|
||||
|
||||
static void idebus_load(QEMUFile* f, IDEBus *bus, int version_id)
|
||||
void idebus_load(QEMUFile* f, IDEBus *bus, int version_id)
|
||||
{
|
||||
IDEState *s;
|
||||
uint8_t cmd;
|
||||
@ -3233,7 +2744,7 @@ static void ide_dma_restart(IDEState *s)
|
||||
ide_dma_start(s, bm->dma_cb);
|
||||
}
|
||||
|
||||
static void ide_dma_cancel(BMDMAState *bm)
|
||||
void ide_dma_cancel(BMDMAState *bm)
|
||||
{
|
||||
if (bm->status & BM_STATUS_DMAING) {
|
||||
bm->status &= ~BM_STATUS_DMAING;
|
||||
|
||||
Loading…
Reference in New Issue
Block a user