qemu vfio-pci: Graphics device quirks
Graphics cards have a number of different backdoors. Some of these are alternative ways to get PCI BAR addresses, some of them are complete mirrors of PCI config space available through MMIO and I/O port access. These quirks cover a number of ATI Radeon and Nvidia devices. On the ATI/AMD side, this should enable HD5450 and HD7850 and hopefully a host of devices around those generations. For Nvidia, my card selection is much more dated. A 8400gs works well with both the Window shipped driver and the Nvidia downloaded driver. A 7300le works as well, with the caveat that generating the Window experience index with the Nvidia driver causes the card to reset several times before generating a BSOD. An NVS 290 card seems to run well with the shipped Windows driver, but generates a BSOD with the Nvidia driver. All of the Nvidia devices work with the Linux Nvidia proprietary driver and nouveau, the HD5450 works with either radeon or fglrx, HD7850 works with vesa and fglrx (not supported by radeon). Extremely limited 3D testing. Device reset is also an issue with graphics. It's unfortunately very common that the devices offer no means to reset the card or doesn't seem effective. Nvidia devices are pretty good about being able to get the device to a working state through the VGA BIOS init, Radeon devices less so, and often require a host reboot. Work remains to be done here. Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
This commit is contained in:
Alex Williamson
parent
f15689c7e4
commit
7076eabcbf
720
hw/vfio_pci.c
720
hw/vfio_pci.c
@ -48,6 +48,16 @@
|
|||||||
do { } while (0)
|
do { } while (0)
|
||||||
#endif
|
#endif
|
||||||
|
|
||||||
|
struct VFIODevice;
|
||||||
|
|
||||||
|
typedef struct VFIOQuirk {
|
||||||
|
MemoryRegion mem;
|
||||||
|
struct VFIODevice *vdev;
|
||||||
|
QLIST_ENTRY(VFIOQuirk) next;
|
||||||
|
uint32_t data;
|
||||||
|
uint32_t data2;
|
||||||
|
} VFIOQuirk;
|
||||||
|
|
||||||
typedef struct VFIOBAR {
|
typedef struct VFIOBAR {
|
||||||
off_t fd_offset; /* offset of BAR within device fd */
|
off_t fd_offset; /* offset of BAR within device fd */
|
||||||
int fd; /* device fd, allows us to pass VFIOBAR as opaque data */
|
int fd; /* device fd, allows us to pass VFIOBAR as opaque data */
|
||||||
@ -57,12 +67,14 @@ typedef struct VFIOBAR {
|
|||||||
size_t size;
|
size_t size;
|
||||||
uint32_t flags; /* VFIO region flags (rd/wr/mmap) */
|
uint32_t flags; /* VFIO region flags (rd/wr/mmap) */
|
||||||
uint8_t nr; /* cache the BAR number for debug */
|
uint8_t nr; /* cache the BAR number for debug */
|
||||||
|
QLIST_HEAD(, VFIOQuirk) quirks;
|
||||||
} VFIOBAR;
|
} VFIOBAR;
|
||||||
|
|
||||||
typedef struct VFIOVGARegion {
|
typedef struct VFIOVGARegion {
|
||||||
MemoryRegion mem;
|
MemoryRegion mem;
|
||||||
off_t offset;
|
off_t offset;
|
||||||
int nr;
|
int nr;
|
||||||
|
QLIST_HEAD(, VFIOQuirk) quirks;
|
||||||
} VFIOVGARegion;
|
} VFIOVGARegion;
|
||||||
|
|
||||||
typedef struct VFIOVGA {
|
typedef struct VFIOVGA {
|
||||||
@ -82,8 +94,6 @@ typedef struct VFIOINTx {
|
|||||||
QEMUTimer *mmap_timer; /* enable mmaps after periods w/o interrupts */
|
QEMUTimer *mmap_timer; /* enable mmaps after periods w/o interrupts */
|
||||||
} VFIOINTx;
|
} VFIOINTx;
|
||||||
|
|
||||||
struct VFIODevice;
|
|
||||||
|
|
||||||
typedef struct VFIOMSIVector {
|
typedef struct VFIOMSIVector {
|
||||||
EventNotifier interrupt; /* eventfd triggered on interrupt */
|
EventNotifier interrupt; /* eventfd triggered on interrupt */
|
||||||
struct VFIODevice *vdev; /* back pointer to device */
|
struct VFIODevice *vdev; /* back pointer to device */
|
||||||
@ -169,6 +179,8 @@ static QLIST_HEAD(, VFIOGroup)
|
|||||||
|
|
||||||
static void vfio_disable_interrupts(VFIODevice *vdev);
|
static void vfio_disable_interrupts(VFIODevice *vdev);
|
||||||
static uint32_t vfio_pci_read_config(PCIDevice *pdev, uint32_t addr, int len);
|
static uint32_t vfio_pci_read_config(PCIDevice *pdev, uint32_t addr, int len);
|
||||||
|
static void vfio_pci_write_config(PCIDevice *pdev, uint32_t addr,
|
||||||
|
uint32_t val, int len);
|
||||||
static void vfio_mmap_set_enabled(VFIODevice *vdev, bool enabled);
|
static void vfio_mmap_set_enabled(VFIODevice *vdev, bool enabled);
|
||||||
|
|
||||||
/*
|
/*
|
||||||
@ -1058,6 +1070,700 @@ static const MemoryRegionOps vfio_vga_ops = {
|
|||||||
.endianness = DEVICE_LITTLE_ENDIAN,
|
.endianness = DEVICE_LITTLE_ENDIAN,
|
||||||
};
|
};
|
||||||
|
|
||||||
|
/*
|
||||||
|
* Device specific quirks
|
||||||
|
*/
|
||||||
|
|
||||||
|
#define PCI_VENDOR_ID_ATI 0x1002
|
||||||
|
|
||||||
|
/*
|
||||||
|
* Device 1002:68f9 (Advanced Micro Devices [AMD] nee ATI Cedar PRO [Radeon
|
||||||
|
* HD 5450/6350]) reports the upper byte of the physical address of the
|
||||||
|
* I/O port BAR4 through VGA register 0x3c3. The BAR is 256 bytes, so the
|
||||||
|
* lower byte is known to be zero. Probing for this quirk reads 0xff from
|
||||||
|
* port 0x3c3 on some devices so we store the physical address and replace
|
||||||
|
* reads with the virtual address any time it matches. XXX Research when
|
||||||
|
* to enable quirk.
|
||||||
|
*/
|
||||||
|
static uint64_t vfio_ati_3c3_quirk_read(void *opaque,
|
||||||
|
hwaddr addr, unsigned size)
|
||||||
|
{
|
||||||
|
VFIOQuirk *quirk = opaque;
|
||||||
|
VFIODevice *vdev = quirk->vdev;
|
||||||
|
PCIDevice *pdev = &vdev->pdev;
|
||||||
|
uint64_t data = vfio_vga_read(&vdev->vga.region[QEMU_PCI_VGA_IO_HI],
|
||||||
|
addr + 0x3, size);
|
||||||
|
|
||||||
|
if (data == quirk->data) {
|
||||||
|
data = pci_get_byte(pdev->config + PCI_BASE_ADDRESS_4 + 1);
|
||||||
|
DPRINTF("%s(0x3c3, 1) = 0x%"PRIx64"\n", __func__, data);
|
||||||
|
}
|
||||||
|
|
||||||
|
return data;
|
||||||
|
}
|
||||||
|
|
||||||
|
static const MemoryRegionOps vfio_ati_3c3_quirk = {
|
||||||
|
.read = vfio_ati_3c3_quirk_read,
|
||||||
|
.endianness = DEVICE_LITTLE_ENDIAN,
|
||||||
|
};
|
||||||
|
|
||||||
|
static void vfio_vga_probe_ati_3c3_quirk(VFIODevice *vdev)
|
||||||
|
{
|
||||||
|
PCIDevice *pdev = &vdev->pdev;
|
||||||
|
off_t physoffset = vdev->config_offset + PCI_BASE_ADDRESS_4;
|
||||||
|
uint32_t physbar;
|
||||||
|
VFIOQuirk *quirk;
|
||||||
|
|
||||||
|
if (pci_get_word(pdev->config + PCI_VENDOR_ID) != PCI_VENDOR_ID_ATI ||
|
||||||
|
vdev->bars[4].size < 256) {
|
||||||
|
return;
|
||||||
|
}
|
||||||
|
|
||||||
|
/* Get I/O port BAR physical address */
|
||||||
|
if (pread(vdev->fd, &physbar, 4, physoffset) != 4) {
|
||||||
|
error_report("vfio: probe failed for ATI/AMD 0x3c3 quirk on device "
|
||||||
|
"%04x:%02x:%02x.%x", vdev->host.domain,
|
||||||
|
vdev->host.bus, vdev->host.slot, vdev->host.function);
|
||||||
|
return;
|
||||||
|
}
|
||||||
|
|
||||||
|
quirk = g_malloc0(sizeof(*quirk));
|
||||||
|
quirk->vdev = vdev;
|
||||||
|
quirk->data = (physbar >> 8) & 0xff;
|
||||||
|
|
||||||
|
memory_region_init_io(&quirk->mem, &vfio_ati_3c3_quirk, quirk,
|
||||||
|
"vfio-ati-3c3-quirk", 1);
|
||||||
|
memory_region_add_subregion(&vdev->vga.region[QEMU_PCI_VGA_IO_HI].mem, 3,
|
||||||
|
&quirk->mem);
|
||||||
|
|
||||||
|
QLIST_INSERT_HEAD(&vdev->vga.region[QEMU_PCI_VGA_IO_HI].quirks,
|
||||||
|
quirk, next);
|
||||||
|
|
||||||
|
DPRINTF("Enabled ATI/AMD quirk 0x3c3 for device %04x:%02x:%02x.%x\n",
|
||||||
|
vdev->host.domain, vdev->host.bus, vdev->host.slot,
|
||||||
|
vdev->host.function);
|
||||||
|
}
|
||||||
|
|
||||||
|
/*
|
||||||
|
* Device 1002:68f9 (Advanced Micro Devices [AMD] nee ATI Cedar PRO [Radeon
|
||||||
|
* HD 5450/6350]) reports the physical address of MMIO BAR0 through a
|
||||||
|
* write/read operation on I/O port BAR4. When uint32_t 0x4010 is written
|
||||||
|
* to offset 0x0, the subsequent read from offset 0x4 returns the contents
|
||||||
|
* of BAR0. Test for this quirk on all ATI/AMD devices. XXX - Note that
|
||||||
|
* 0x10 is the offset of BAR0 in config sapce, is this a window to all of
|
||||||
|
* config space?
|
||||||
|
*/
|
||||||
|
static uint64_t vfio_ati_4010_quirk_read(void *opaque,
|
||||||
|
hwaddr addr, unsigned size)
|
||||||
|
{
|
||||||
|
VFIOQuirk *quirk = opaque;
|
||||||
|
VFIODevice *vdev = quirk->vdev;
|
||||||
|
PCIDevice *pdev = &vdev->pdev;
|
||||||
|
uint64_t data = vfio_bar_read(&vdev->bars[4], addr, size);
|
||||||
|
|
||||||
|
if (addr == 4 && size == 4 && quirk->data) {
|
||||||
|
data = pci_get_long(pdev->config + PCI_BASE_ADDRESS_0);
|
||||||
|
DPRINTF("%s(BAR4+0x4) = 0x%"PRIx64"\n", __func__, data);
|
||||||
|
}
|
||||||
|
|
||||||
|
quirk->data = 0;
|
||||||
|
|
||||||
|
return data;
|
||||||
|
}
|
||||||
|
|
||||||
|
static void vfio_ati_4010_quirk_write(void *opaque, hwaddr addr,
|
||||||
|
uint64_t data, unsigned size)
|
||||||
|
{
|
||||||
|
VFIOQuirk *quirk = opaque;
|
||||||
|
VFIODevice *vdev = quirk->vdev;
|
||||||
|
|
||||||
|
vfio_bar_write(&vdev->bars[4], addr, data, size);
|
||||||
|
|
||||||
|
quirk->data = (addr == 0 && size == 4 && data == 0x4010) ? 1 : 0;
|
||||||
|
}
|
||||||
|
|
||||||
|
static const MemoryRegionOps vfio_ati_4010_quirk = {
|
||||||
|
.read = vfio_ati_4010_quirk_read,
|
||||||
|
.write = vfio_ati_4010_quirk_write,
|
||||||
|
.endianness = DEVICE_LITTLE_ENDIAN,
|
||||||
|
};
|
||||||
|
|
||||||
|
static void vfio_probe_ati_4010_quirk(VFIODevice *vdev, int nr)
|
||||||
|
{
|
||||||
|
PCIDevice *pdev = &vdev->pdev;
|
||||||
|
off_t physoffset = vdev->config_offset + PCI_BASE_ADDRESS_0;
|
||||||
|
uint32_t physbar0;
|
||||||
|
uint64_t data;
|
||||||
|
VFIOQuirk *quirk;
|
||||||
|
|
||||||
|
if (!vdev->has_vga || nr != 4 || !vdev->bars[0].size ||
|
||||||
|
pci_get_word(pdev->config + PCI_VENDOR_ID) != PCI_VENDOR_ID_ATI) {
|
||||||
|
return;
|
||||||
|
}
|
||||||
|
|
||||||
|
/* Get I/O port BAR physical address */
|
||||||
|
if (pread(vdev->fd, &physbar0, 4, physoffset) != 4) {
|
||||||
|
error_report("vfio: probe failed for ATI/AMD 0x4010 quirk on device "
|
||||||
|
"%04x:%02x:%02x.%x", vdev->host.domain,
|
||||||
|
vdev->host.bus, vdev->host.slot, vdev->host.function);
|
||||||
|
return;
|
||||||
|
}
|
||||||
|
|
||||||
|
/* Write 0x4010 to I/O port BAR offset 0 */
|
||||||
|
vfio_bar_write(&vdev->bars[4], 0, 0x4010, 4);
|
||||||
|
/* Read back result */
|
||||||
|
data = vfio_bar_read(&vdev->bars[4], 4, 4);
|
||||||
|
|
||||||
|
/* If the register matches the physical address of BAR0, we need a quirk */
|
||||||
|
if (data != physbar0) {
|
||||||
|
return;
|
||||||
|
}
|
||||||
|
|
||||||
|
quirk = g_malloc0(sizeof(*quirk));
|
||||||
|
quirk->vdev = vdev;
|
||||||
|
|
||||||
|
memory_region_init_io(&quirk->mem, &vfio_ati_4010_quirk, quirk,
|
||||||
|
"vfio-ati-4010-quirk", 8);
|
||||||
|
memory_region_add_subregion_overlap(&vdev->bars[nr].mem, 0, &quirk->mem, 1);
|
||||||
|
|
||||||
|
QLIST_INSERT_HEAD(&vdev->bars[nr].quirks, quirk, next);
|
||||||
|
|
||||||
|
DPRINTF("Enabled ATI/AMD quirk 0x4010 for device %04x:%02x:%02x.%x\n",
|
||||||
|
vdev->host.domain, vdev->host.bus, vdev->host.slot,
|
||||||
|
vdev->host.function);
|
||||||
|
}
|
||||||
|
|
||||||
|
/*
|
||||||
|
* Device 1002:5b63 (Advanced Micro Devices [AMD] nee ATI RV370 [Radeon X550])
|
||||||
|
* retrieves the upper half of the MMIO BAR0 physical address by writing
|
||||||
|
* 0xf10 to I/O port BAR1 offset 0 and reading the result from offset 6.
|
||||||
|
* XXX - 0x10 is the offset of BAR0 in PCI config space, this could provide
|
||||||
|
* full access to config space. Config space is little endian, so the data
|
||||||
|
* register probably starts at 0x4.
|
||||||
|
*/
|
||||||
|
static uint64_t vfio_ati_f10_quirk_read(void *opaque,
|
||||||
|
hwaddr addr, unsigned size)
|
||||||
|
{
|
||||||
|
VFIOQuirk *quirk = opaque;
|
||||||
|
VFIODevice *vdev = quirk->vdev;
|
||||||
|
PCIDevice *pdev = &vdev->pdev;
|
||||||
|
uint64_t data = vfio_bar_read(&vdev->bars[1], addr, size);
|
||||||
|
|
||||||
|
if (addr == 6 && size == 2 && quirk->data) {
|
||||||
|
data = pci_get_word(pdev->config + PCI_BASE_ADDRESS_0 + 2);
|
||||||
|
DPRINTF("%s(BAR1+0x6) = 0x%"PRIx64"\n", __func__, data);
|
||||||
|
}
|
||||||
|
|
||||||
|
quirk->data = 0;
|
||||||
|
|
||||||
|
return data;
|
||||||
|
}
|
||||||
|
|
||||||
|
static void vfio_ati_f10_quirk_write(void *opaque, hwaddr addr,
|
||||||
|
uint64_t data, unsigned size)
|
||||||
|
{
|
||||||
|
VFIOQuirk *quirk = opaque;
|
||||||
|
VFIODevice *vdev = quirk->vdev;
|
||||||
|
|
||||||
|
vfio_bar_write(&vdev->bars[1], addr, data, size);
|
||||||
|
|
||||||
|
quirk->data = (addr == 0 && size == 4 && data == 0xf10) ? 1 : 0;
|
||||||
|
}
|
||||||
|
|
||||||
|
static const MemoryRegionOps vfio_ati_f10_quirk = {
|
||||||
|
.read = vfio_ati_f10_quirk_read,
|
||||||
|
.write = vfio_ati_f10_quirk_write,
|
||||||
|
.endianness = DEVICE_LITTLE_ENDIAN,
|
||||||
|
};
|
||||||
|
|
||||||
|
static void vfio_probe_ati_f10_quirk(VFIODevice *vdev, int nr)
|
||||||
|
{
|
||||||
|
PCIDevice *pdev = &vdev->pdev;
|
||||||
|
off_t physoffset = vdev->config_offset + PCI_BASE_ADDRESS_0;
|
||||||
|
uint32_t physbar0;
|
||||||
|
uint64_t data;
|
||||||
|
VFIOQuirk *quirk;
|
||||||
|
|
||||||
|
if (!vdev->has_vga || nr != 1 || !vdev->bars[0].size ||
|
||||||
|
pci_get_word(pdev->config + PCI_VENDOR_ID) != PCI_VENDOR_ID_ATI) {
|
||||||
|
return;
|
||||||
|
}
|
||||||
|
|
||||||
|
/* Get I/O port BAR physical address */
|
||||||
|
if (pread(vdev->fd, &physbar0, 4, physoffset) != 4) {
|
||||||
|
error_report("vfio: probe failed for ATI/AMD 0xf10 quirk on device "
|
||||||
|
"%04x:%02x:%02x.%x", vdev->host.domain,
|
||||||
|
vdev->host.bus, vdev->host.slot, vdev->host.function);
|
||||||
|
return;
|
||||||
|
}
|
||||||
|
|
||||||
|
vfio_bar_write(&vdev->bars[1], 0, 0xf10, 4);
|
||||||
|
data = vfio_bar_read(&vdev->bars[1], 0x6, 2);
|
||||||
|
|
||||||
|
/* If the register matches the physical address of BAR0, we need a quirk */
|
||||||
|
if (data != (le32_to_cpu(physbar0) >> 16)) {
|
||||||
|
return;
|
||||||
|
}
|
||||||
|
|
||||||
|
quirk = g_malloc0(sizeof(*quirk));
|
||||||
|
quirk->vdev = vdev;
|
||||||
|
|
||||||
|
memory_region_init_io(&quirk->mem, &vfio_ati_f10_quirk, quirk,
|
||||||
|
"vfio-ati-f10-quirk", 8);
|
||||||
|
memory_region_add_subregion_overlap(&vdev->bars[nr].mem, 0, &quirk->mem, 1);
|
||||||
|
|
||||||
|
QLIST_INSERT_HEAD(&vdev->bars[nr].quirks, quirk, next);
|
||||||
|
|
||||||
|
DPRINTF("Enabled ATI/AMD quirk 0xf10 for device %04x:%02x:%02x.%x\n",
|
||||||
|
vdev->host.domain, vdev->host.bus, vdev->host.slot,
|
||||||
|
vdev->host.function);
|
||||||
|
}
|
||||||
|
|
||||||
|
#define PCI_VENDOR_ID_NVIDIA 0x10de
|
||||||
|
|
||||||
|
/*
|
||||||
|
* Nvidia has several different methods to get to config space, the
|
||||||
|
* nouveu project has several of these documented here:
|
||||||
|
* https://github.com/pathscale/envytools/tree/master/hwdocs
|
||||||
|
*
|
||||||
|
* The first quirk is actually not documented in envytools and is found
|
||||||
|
* on 10de:01d1 (NVIDIA Corporation G72 [GeForce 7300 LE]). This is an
|
||||||
|
* NV46 chipset. The backdoor uses the legacy VGA I/O ports to access
|
||||||
|
* the mirror of PCI config space found at BAR0 offset 0x1800. The access
|
||||||
|
* sequence first writes 0x338 to I/O port 0x3d4. The target offset is
|
||||||
|
* then written to 0x3d0. Finally 0x538 is written for a read and 0x738
|
||||||
|
* is written for a write to 0x3d4. The BAR0 offset is then accessible
|
||||||
|
* through 0x3d0. This quirk doesn't seem to be necessary on newer cards
|
||||||
|
* that use the I/O port BAR5 window but it doesn't hurt to leave it.
|
||||||
|
*/
|
||||||
|
enum {
|
||||||
|
NV_3D0_NONE,
|
||||||
|
NV_3D0_SELECT,
|
||||||
|
NV_3D0_WINDOW,
|
||||||
|
NV_3D0_READ,
|
||||||
|
NV_3D0_WRITE,
|
||||||
|
};
|
||||||
|
|
||||||
|
static uint64_t vfio_nvidia_3d0_quirk_read(void *opaque,
|
||||||
|
hwaddr addr, unsigned size)
|
||||||
|
{
|
||||||
|
VFIOQuirk *quirk = opaque;
|
||||||
|
VFIODevice *vdev = quirk->vdev;
|
||||||
|
PCIDevice *pdev = &vdev->pdev;
|
||||||
|
uint64_t data = vfio_vga_read(&vdev->vga.region[QEMU_PCI_VGA_IO_HI],
|
||||||
|
addr + 0x10, size);
|
||||||
|
|
||||||
|
if (quirk->data == NV_3D0_READ && addr == 0) {
|
||||||
|
data = vfio_pci_read_config(pdev, quirk->data2, size);
|
||||||
|
DPRINTF("%s(0x3d0, %d) = 0x%"PRIx64"\n", __func__, size, data);
|
||||||
|
}
|
||||||
|
|
||||||
|
quirk->data = NV_3D0_NONE;
|
||||||
|
|
||||||
|
return data;
|
||||||
|
}
|
||||||
|
|
||||||
|
static void vfio_nvidia_3d0_quirk_write(void *opaque, hwaddr addr,
|
||||||
|
uint64_t data, unsigned size)
|
||||||
|
{
|
||||||
|
VFIOQuirk *quirk = opaque;
|
||||||
|
VFIODevice *vdev = quirk->vdev;
|
||||||
|
PCIDevice *pdev = &vdev->pdev;
|
||||||
|
|
||||||
|
switch (quirk->data) {
|
||||||
|
case NV_3D0_NONE:
|
||||||
|
if (addr == 4 && data == 0x338) {
|
||||||
|
quirk->data = NV_3D0_SELECT;
|
||||||
|
}
|
||||||
|
break;
|
||||||
|
case NV_3D0_SELECT:
|
||||||
|
quirk->data = NV_3D0_NONE;
|
||||||
|
if (addr == 0 && (data & ~0xff) == 0x1800) {
|
||||||
|
quirk->data = NV_3D0_WINDOW;
|
||||||
|
quirk->data2 = data & 0xff;
|
||||||
|
}
|
||||||
|
break;
|
||||||
|
case NV_3D0_WINDOW:
|
||||||
|
quirk->data = NV_3D0_NONE;
|
||||||
|
if (addr == 4) {
|
||||||
|
if (data == 0x538) {
|
||||||
|
quirk->data = NV_3D0_READ;
|
||||||
|
} else if (data == 0x738) {
|
||||||
|
quirk->data = NV_3D0_WRITE;
|
||||||
|
}
|
||||||
|
}
|
||||||
|
break;
|
||||||
|
case NV_3D0_WRITE:
|
||||||
|
quirk->data = NV_3D0_NONE;
|
||||||
|
if (addr == 0) {
|
||||||
|
vfio_pci_write_config(pdev, quirk->data2, data, size);
|
||||||
|
DPRINTF("%s(0x3d0, 0x%"PRIx64", %d)\n", __func__, data, size);
|
||||||
|
return;
|
||||||
|
}
|
||||||
|
break;
|
||||||
|
default:
|
||||||
|
quirk->data = NV_3D0_NONE;
|
||||||
|
}
|
||||||
|
|
||||||
|
vfio_vga_write(&vdev->vga.region[QEMU_PCI_VGA_IO_HI],
|
||||||
|
addr + 0x10, data, size);
|
||||||
|
}
|
||||||
|
|
||||||
|
static const MemoryRegionOps vfio_nvidia_3d0_quirk = {
|
||||||
|
.read = vfio_nvidia_3d0_quirk_read,
|
||||||
|
.write = vfio_nvidia_3d0_quirk_write,
|
||||||
|
.endianness = DEVICE_LITTLE_ENDIAN,
|
||||||
|
};
|
||||||
|
|
||||||
|
static void vfio_vga_probe_nvidia_3d0_quirk(VFIODevice *vdev)
|
||||||
|
{
|
||||||
|
PCIDevice *pdev = &vdev->pdev;
|
||||||
|
VFIOQuirk *quirk;
|
||||||
|
|
||||||
|
if (pci_get_word(pdev->config + PCI_VENDOR_ID) != PCI_VENDOR_ID_NVIDIA ||
|
||||||
|
!vdev->bars[1].size) {
|
||||||
|
return;
|
||||||
|
}
|
||||||
|
|
||||||
|
quirk = g_malloc0(sizeof(*quirk));
|
||||||
|
quirk->vdev = vdev;
|
||||||
|
|
||||||
|
memory_region_init_io(&quirk->mem, &vfio_nvidia_3d0_quirk, quirk,
|
||||||
|
"vfio-nvidia-3d0-quirk", 6);
|
||||||
|
memory_region_add_subregion(&vdev->vga.region[QEMU_PCI_VGA_IO_HI].mem,
|
||||||
|
0x10, &quirk->mem);
|
||||||
|
|
||||||
|
QLIST_INSERT_HEAD(&vdev->vga.region[QEMU_PCI_VGA_IO_HI].quirks,
|
||||||
|
quirk, next);
|
||||||
|
|
||||||
|
DPRINTF("Enabled NVIDIA VGA 0x3d0 quirk for device %04x:%02x:%02x.%x\n",
|
||||||
|
vdev->host.domain, vdev->host.bus, vdev->host.slot,
|
||||||
|
vdev->host.function);
|
||||||
|
}
|
||||||
|
|
||||||
|
/*
|
||||||
|
* The second quirk is documented in envytools. The I/O port BAR5 is just
|
||||||
|
* a set of address/data ports to the MMIO BARs. The BAR we care about is
|
||||||
|
* again BAR0. This backdoor is apparently a bit newer than the one above
|
||||||
|
* so we need to not only trap 256 bytes @0x1800, but all of PCI config
|
||||||
|
* space, including extended space is available at the 4k @0x88000.
|
||||||
|
*/
|
||||||
|
enum {
|
||||||
|
NV_BAR5_ADDRESS = 0x1,
|
||||||
|
NV_BAR5_ENABLE = 0x2,
|
||||||
|
NV_BAR5_MASTER = 0x4,
|
||||||
|
NV_BAR5_VALID = 0x7,
|
||||||
|
};
|
||||||
|
|
||||||
|
static uint64_t vfio_nvidia_bar5_window_quirk_read(void *opaque,
|
||||||
|
hwaddr addr, unsigned size)
|
||||||
|
{
|
||||||
|
VFIOQuirk *quirk = opaque;
|
||||||
|
VFIODevice *vdev = quirk->vdev;
|
||||||
|
uint64_t data = vfio_bar_read(&vdev->bars[5], addr, size);
|
||||||
|
|
||||||
|
if (addr == 0xc && quirk->data == NV_BAR5_VALID) {
|
||||||
|
data = vfio_pci_read_config(&vdev->pdev, quirk->data2, size);
|
||||||
|
DPRINTF("%s(%04x:%02x:%02x.%x:BAR5+0x%"HWADDR_PRIx", %d) = 0x%"
|
||||||
|
PRIx64"\n", __func__, vdev->host.domain, vdev->host.bus,
|
||||||
|
vdev->host.slot, vdev->host.function, addr, size, data);
|
||||||
|
}
|
||||||
|
|
||||||
|
return data;
|
||||||
|
}
|
||||||
|
|
||||||
|
static void vfio_nvidia_bar5_window_quirk_write(void *opaque, hwaddr addr,
|
||||||
|
uint64_t data, unsigned size)
|
||||||
|
{
|
||||||
|
VFIOQuirk *quirk = opaque;
|
||||||
|
VFIODevice *vdev = quirk->vdev;
|
||||||
|
|
||||||
|
/*
|
||||||
|
* Use quirk->data to track enables and quirk->data2 for the offset
|
||||||
|
*/
|
||||||
|
switch (addr) {
|
||||||
|
case 0x0:
|
||||||
|
if (data & 0x1) {
|
||||||
|
quirk->data |= NV_BAR5_MASTER;
|
||||||
|
} else {
|
||||||
|
quirk->data &= ~NV_BAR5_MASTER;
|
||||||
|
}
|
||||||
|
break;
|
||||||
|
case 0x4:
|
||||||
|
if (data & 0x1) {
|
||||||
|
quirk->data |= NV_BAR5_ENABLE;
|
||||||
|
} else {
|
||||||
|
quirk->data &= ~NV_BAR5_ENABLE;
|
||||||
|
}
|
||||||
|
break;
|
||||||
|
case 0x8:
|
||||||
|
if (quirk->data & NV_BAR5_MASTER) {
|
||||||
|
if ((data & ~0xfff) == 0x88000) {
|
||||||
|
quirk->data |= NV_BAR5_ADDRESS;
|
||||||
|
quirk->data2 = data & 0xfff;
|
||||||
|
} else if ((data & ~0xff) == 0x1800) {
|
||||||
|
quirk->data |= NV_BAR5_ADDRESS;
|
||||||
|
quirk->data2 = data & 0xff;
|
||||||
|
} else {
|
||||||
|
quirk->data &= ~NV_BAR5_ADDRESS;
|
||||||
|
}
|
||||||
|
}
|
||||||
|
break;
|
||||||
|
case 0xc:
|
||||||
|
if (quirk->data == NV_BAR5_VALID) {
|
||||||
|
vfio_pci_write_config(&vdev->pdev, quirk->data2, data, size);
|
||||||
|
DPRINTF("%s(%04x:%02x:%02x.%x:BAR5+0x%"HWADDR_PRIx", 0x%"
|
||||||
|
PRIx64", %d)\n", __func__, vdev->host.domain,
|
||||||
|
vdev->host.bus, vdev->host.slot, vdev->host.function,
|
||||||
|
addr, data, size);
|
||||||
|
return;
|
||||||
|
}
|
||||||
|
}
|
||||||
|
|
||||||
|
vfio_bar_write(&vdev->bars[5], addr, data, size);
|
||||||
|
}
|
||||||
|
|
||||||
|
static const MemoryRegionOps vfio_nvidia_bar5_window_quirk = {
|
||||||
|
.read = vfio_nvidia_bar5_window_quirk_read,
|
||||||
|
.write = vfio_nvidia_bar5_window_quirk_write,
|
||||||
|
.valid.min_access_size = 4,
|
||||||
|
.endianness = DEVICE_LITTLE_ENDIAN,
|
||||||
|
};
|
||||||
|
|
||||||
|
static void vfio_probe_nvidia_bar5_window_quirk(VFIODevice *vdev, int nr)
|
||||||
|
{
|
||||||
|
PCIDevice *pdev = &vdev->pdev;
|
||||||
|
VFIOQuirk *quirk;
|
||||||
|
|
||||||
|
if (!vdev->has_vga || nr != 5 ||
|
||||||
|
pci_get_word(pdev->config + PCI_VENDOR_ID) != PCI_VENDOR_ID_NVIDIA) {
|
||||||
|
return;
|
||||||
|
}
|
||||||
|
|
||||||
|
quirk = g_malloc0(sizeof(*quirk));
|
||||||
|
quirk->vdev = vdev;
|
||||||
|
|
||||||
|
memory_region_init_io(&quirk->mem, &vfio_nvidia_bar5_window_quirk, quirk,
|
||||||
|
"vfio-nvidia-bar5-window-quirk", 16);
|
||||||
|
memory_region_add_subregion_overlap(&vdev->bars[nr].mem, 0, &quirk->mem, 1);
|
||||||
|
|
||||||
|
QLIST_INSERT_HEAD(&vdev->bars[nr].quirks, quirk, next);
|
||||||
|
|
||||||
|
DPRINTF("Enabled NVIDIA BAR5 window quirk for device %04x:%02x:%02x.%x\n",
|
||||||
|
vdev->host.domain, vdev->host.bus, vdev->host.slot,
|
||||||
|
vdev->host.function);
|
||||||
|
}
|
||||||
|
|
||||||
|
/*
|
||||||
|
* Finally, BAR0 itself. We want to redirect any accesses to either
|
||||||
|
* 0x1800 or 0x88000 through the PCI config space access functions.
|
||||||
|
*
|
||||||
|
* NB - quirk at a page granularity or else they don't seem to work when
|
||||||
|
* BARs are mmap'd
|
||||||
|
*
|
||||||
|
* Here's offset 0x88000...
|
||||||
|
*/
|
||||||
|
static uint64_t vfio_nvidia_bar0_88000_quirk_read(void *opaque,
|
||||||
|
hwaddr addr, unsigned size)
|
||||||
|
{
|
||||||
|
VFIOQuirk *quirk = opaque;
|
||||||
|
VFIODevice *vdev = quirk->vdev;
|
||||||
|
hwaddr base = 0x88000 & TARGET_PAGE_MASK;
|
||||||
|
hwaddr offset = 0x88000 & ~TARGET_PAGE_MASK;
|
||||||
|
uint64_t data = vfio_bar_read(&vdev->bars[0], addr + base, size);
|
||||||
|
|
||||||
|
if (ranges_overlap(addr, size, offset, PCI_CONFIG_SPACE_SIZE)) {
|
||||||
|
data = vfio_pci_read_config(&vdev->pdev, addr - offset, size);
|
||||||
|
|
||||||
|
DPRINTF("%s(%04x:%02x:%02x.%x:BAR0+0x%"HWADDR_PRIx", %d) = 0x%"
|
||||||
|
PRIx64"\n", __func__, vdev->host.domain, vdev->host.bus,
|
||||||
|
vdev->host.slot, vdev->host.function, addr + base, size, data);
|
||||||
|
}
|
||||||
|
|
||||||
|
return data;
|
||||||
|
}
|
||||||
|
|
||||||
|
static void vfio_nvidia_bar0_88000_quirk_write(void *opaque, hwaddr addr,
|
||||||
|
uint64_t data, unsigned size)
|
||||||
|
{
|
||||||
|
VFIOQuirk *quirk = opaque;
|
||||||
|
VFIODevice *vdev = quirk->vdev;
|
||||||
|
hwaddr base = 0x88000 & TARGET_PAGE_MASK;
|
||||||
|
hwaddr offset = 0x88000 & ~TARGET_PAGE_MASK;
|
||||||
|
|
||||||
|
if (ranges_overlap(addr, size, offset, PCI_CONFIG_SPACE_SIZE)) {
|
||||||
|
vfio_pci_write_config(&vdev->pdev, addr - offset, data, size);
|
||||||
|
|
||||||
|
DPRINTF("%s(%04x:%02x:%02x.%x:BAR0+0x%"HWADDR_PRIx", 0x%"
|
||||||
|
PRIx64", %d)\n", __func__, vdev->host.domain, vdev->host.bus,
|
||||||
|
vdev->host.slot, vdev->host.function, addr + base, data, size);
|
||||||
|
} else {
|
||||||
|
vfio_bar_write(&vdev->bars[0], addr + base, data, size);
|
||||||
|
}
|
||||||
|
}
|
||||||
|
|
||||||
|
static const MemoryRegionOps vfio_nvidia_bar0_88000_quirk = {
|
||||||
|
.read = vfio_nvidia_bar0_88000_quirk_read,
|
||||||
|
.write = vfio_nvidia_bar0_88000_quirk_write,
|
||||||
|
.endianness = DEVICE_LITTLE_ENDIAN,
|
||||||
|
};
|
||||||
|
|
||||||
|
static void vfio_probe_nvidia_bar0_88000_quirk(VFIODevice *vdev, int nr)
|
||||||
|
{
|
||||||
|
PCIDevice *pdev = &vdev->pdev;
|
||||||
|
VFIOQuirk *quirk;
|
||||||
|
|
||||||
|
if (!vdev->has_vga || nr != 0 ||
|
||||||
|
pci_get_word(pdev->config + PCI_VENDOR_ID) != PCI_VENDOR_ID_NVIDIA) {
|
||||||
|
return;
|
||||||
|
}
|
||||||
|
|
||||||
|
quirk = g_malloc0(sizeof(*quirk));
|
||||||
|
quirk->vdev = vdev;
|
||||||
|
|
||||||
|
memory_region_init_io(&quirk->mem, &vfio_nvidia_bar0_88000_quirk, quirk,
|
||||||
|
"vfio-nvidia-bar0-88000-quirk",
|
||||||
|
TARGET_PAGE_ALIGN(PCIE_CONFIG_SPACE_SIZE));
|
||||||
|
memory_region_add_subregion_overlap(&vdev->bars[nr].mem,
|
||||||
|
0x88000 & TARGET_PAGE_MASK,
|
||||||
|
&quirk->mem, 1);
|
||||||
|
|
||||||
|
QLIST_INSERT_HEAD(&vdev->bars[nr].quirks, quirk, next);
|
||||||
|
|
||||||
|
DPRINTF("Enabled NVIDIA BAR0 0x88000 quirk for device %04x:%02x:%02x.%x\n",
|
||||||
|
vdev->host.domain, vdev->host.bus, vdev->host.slot,
|
||||||
|
vdev->host.function);
|
||||||
|
}
|
||||||
|
|
||||||
|
/*
|
||||||
|
* And here's the same for BAR0 offset 0x1800...
|
||||||
|
*/
|
||||||
|
static uint64_t vfio_nvidia_bar0_1800_quirk_read(void *opaque,
|
||||||
|
hwaddr addr, unsigned size)
|
||||||
|
{
|
||||||
|
VFIOQuirk *quirk = opaque;
|
||||||
|
VFIODevice *vdev = quirk->vdev;
|
||||||
|
hwaddr base = 0x1800 & TARGET_PAGE_MASK;
|
||||||
|
hwaddr offset = 0x1800 & ~TARGET_PAGE_MASK;
|
||||||
|
uint64_t data = vfio_bar_read(&vdev->bars[0], addr + base, size);
|
||||||
|
|
||||||
|
if (ranges_overlap(addr, size, offset, PCI_CONFIG_SPACE_SIZE)) {
|
||||||
|
data = vfio_pci_read_config(&vdev->pdev, addr - offset, size);
|
||||||
|
|
||||||
|
DPRINTF("%s(%04x:%02x:%02x.%x:BAR0+0x%"HWADDR_PRIx", %d) = 0x%"
|
||||||
|
PRIx64"\n", __func__, vdev->host.domain, vdev->host.bus,
|
||||||
|
vdev->host.slot, vdev->host.function, addr + base, size, data);
|
||||||
|
}
|
||||||
|
|
||||||
|
return data;
|
||||||
|
}
|
||||||
|
|
||||||
|
static void vfio_nvidia_bar0_1800_quirk_write(void *opaque, hwaddr addr,
|
||||||
|
uint64_t data, unsigned size)
|
||||||
|
{
|
||||||
|
VFIOQuirk *quirk = opaque;
|
||||||
|
VFIODevice *vdev = quirk->vdev;
|
||||||
|
hwaddr base = 0x1800 & TARGET_PAGE_MASK;
|
||||||
|
hwaddr offset = 0x1800 & ~TARGET_PAGE_MASK;
|
||||||
|
|
||||||
|
if (ranges_overlap(addr, size, offset, PCI_CONFIG_SPACE_SIZE)) {
|
||||||
|
vfio_pci_write_config(&vdev->pdev, addr - offset, data, size);
|
||||||
|
|
||||||
|
DPRINTF("%s(%04x:%02x:%02x.%x:BAR0+0x%"HWADDR_PRIx", 0x%"
|
||||||
|
PRIx64", %d)\n", __func__, vdev->host.domain, vdev->host.bus,
|
||||||
|
vdev->host.slot, vdev->host.function, addr + base, data, size);
|
||||||
|
} else {
|
||||||
|
vfio_bar_write(&vdev->bars[0], addr + base, data, size);
|
||||||
|
}
|
||||||
|
}
|
||||||
|
|
||||||
|
static const MemoryRegionOps vfio_nvidia_bar0_1800_quirk = {
|
||||||
|
.read = vfio_nvidia_bar0_1800_quirk_read,
|
||||||
|
.write = vfio_nvidia_bar0_1800_quirk_write,
|
||||||
|
.endianness = DEVICE_LITTLE_ENDIAN,
|
||||||
|
};
|
||||||
|
|
||||||
|
static void vfio_probe_nvidia_bar0_1800_quirk(VFIODevice *vdev, int nr)
|
||||||
|
{
|
||||||
|
PCIDevice *pdev = &vdev->pdev;
|
||||||
|
VFIOQuirk *quirk;
|
||||||
|
|
||||||
|
if (!vdev->has_vga || nr != 0 ||
|
||||||
|
pci_get_word(pdev->config + PCI_VENDOR_ID) != PCI_VENDOR_ID_NVIDIA) {
|
||||||
|
return;
|
||||||
|
}
|
||||||
|
|
||||||
|
/* Log the chipset ID */
|
||||||
|
DPRINTF("Nvidia NV%02x\n",
|
||||||
|
(unsigned int)(vfio_bar_read(&vdev->bars[0], 0, 4) >> 20) & 0xff);
|
||||||
|
|
||||||
|
quirk = g_malloc0(sizeof(*quirk));
|
||||||
|
quirk->vdev = vdev;
|
||||||
|
|
||||||
|
memory_region_init_io(&quirk->mem, &vfio_nvidia_bar0_1800_quirk, quirk,
|
||||||
|
"vfio-nvidia-bar0-1800-quirk",
|
||||||
|
TARGET_PAGE_ALIGN(PCI_CONFIG_SPACE_SIZE));
|
||||||
|
memory_region_add_subregion_overlap(&vdev->bars[nr].mem,
|
||||||
|
0x1800 & TARGET_PAGE_MASK,
|
||||||
|
&quirk->mem, 1);
|
||||||
|
|
||||||
|
QLIST_INSERT_HEAD(&vdev->bars[nr].quirks, quirk, next);
|
||||||
|
|
||||||
|
DPRINTF("Enabled NVIDIA BAR0 0x1800 quirk for device %04x:%02x:%02x.%x\n",
|
||||||
|
vdev->host.domain, vdev->host.bus, vdev->host.slot,
|
||||||
|
vdev->host.function);
|
||||||
|
}
|
||||||
|
|
||||||
|
/*
|
||||||
|
* TODO - Some Nvidia devices provide config access to their companion HDA
|
||||||
|
* device and even to their parent bridge via these config space mirrors.
|
||||||
|
* Add quirks for those regions.
|
||||||
|
*/
|
||||||
|
|
||||||
|
/*
|
||||||
|
* Common quirk probe entry points.
|
||||||
|
*/
|
||||||
|
static void vfio_vga_quirk_setup(VFIODevice *vdev)
|
||||||
|
{
|
||||||
|
vfio_vga_probe_ati_3c3_quirk(vdev);
|
||||||
|
vfio_vga_probe_nvidia_3d0_quirk(vdev);
|
||||||
|
}
|
||||||
|
|
||||||
|
static void vfio_vga_quirk_teardown(VFIODevice *vdev)
|
||||||
|
{
|
||||||
|
int i;
|
||||||
|
|
||||||
|
for (i = 0; i < ARRAY_SIZE(vdev->vga.region); i++) {
|
||||||
|
while (!QLIST_EMPTY(&vdev->vga.region[i].quirks)) {
|
||||||
|
VFIOQuirk *quirk = QLIST_FIRST(&vdev->vga.region[i].quirks);
|
||||||
|
memory_region_del_subregion(&vdev->vga.region[i].mem, &quirk->mem);
|
||||||
|
QLIST_REMOVE(quirk, next);
|
||||||
|
g_free(quirk);
|
||||||
|
}
|
||||||
|
}
|
||||||
|
}
|
||||||
|
|
||||||
|
static void vfio_bar_quirk_setup(VFIODevice *vdev, int nr)
|
||||||
|
{
|
||||||
|
vfio_probe_ati_4010_quirk(vdev, nr);
|
||||||
|
vfio_probe_ati_f10_quirk(vdev, nr);
|
||||||
|
vfio_probe_nvidia_bar5_window_quirk(vdev, nr);
|
||||||
|
vfio_probe_nvidia_bar0_88000_quirk(vdev, nr);
|
||||||
|
vfio_probe_nvidia_bar0_1800_quirk(vdev, nr);
|
||||||
|
}
|
||||||
|
|
||||||
|
static void vfio_bar_quirk_teardown(VFIODevice *vdev, int nr)
|
||||||
|
{
|
||||||
|
VFIOBAR *bar = &vdev->bars[nr];
|
||||||
|
|
||||||
|
while (!QLIST_EMPTY(&bar->quirks)) {
|
||||||
|
VFIOQuirk *quirk = QLIST_FIRST(&bar->quirks);
|
||||||
|
memory_region_del_subregion(&bar->mem, &quirk->mem);
|
||||||
|
QLIST_REMOVE(quirk, next);
|
||||||
|
g_free(quirk);
|
||||||
|
}
|
||||||
|
}
|
||||||
|
|
||||||
/*
|
/*
|
||||||
* PCI config space
|
* PCI config space
|
||||||
*/
|
*/
|
||||||
@ -1459,6 +2165,8 @@ static void vfio_unmap_bar(VFIODevice *vdev, int nr)
|
|||||||
return;
|
return;
|
||||||
}
|
}
|
||||||
|
|
||||||
|
vfio_bar_quirk_teardown(vdev, nr);
|
||||||
|
|
||||||
memory_region_del_subregion(&bar->mem, &bar->mmap_mem);
|
memory_region_del_subregion(&bar->mem, &bar->mmap_mem);
|
||||||
munmap(bar->mmap, memory_region_size(&bar->mmap_mem));
|
munmap(bar->mmap, memory_region_size(&bar->mmap_mem));
|
||||||
|
|
||||||
@ -1569,6 +2277,8 @@ static void vfio_map_bar(VFIODevice *vdev, int nr)
|
|||||||
error_report("%s unsupported. Performance may be slow", name);
|
error_report("%s unsupported. Performance may be slow", name);
|
||||||
}
|
}
|
||||||
}
|
}
|
||||||
|
|
||||||
|
vfio_bar_quirk_setup(vdev, nr);
|
||||||
}
|
}
|
||||||
|
|
||||||
static void vfio_map_bars(VFIODevice *vdev)
|
static void vfio_map_bars(VFIODevice *vdev)
|
||||||
@ -1599,6 +2309,7 @@ static void vfio_map_bars(VFIODevice *vdev)
|
|||||||
pci_register_vga(&vdev->pdev, &vdev->vga.region[QEMU_PCI_VGA_MEM].mem,
|
pci_register_vga(&vdev->pdev, &vdev->vga.region[QEMU_PCI_VGA_MEM].mem,
|
||||||
&vdev->vga.region[QEMU_PCI_VGA_IO_LO].mem,
|
&vdev->vga.region[QEMU_PCI_VGA_IO_LO].mem,
|
||||||
&vdev->vga.region[QEMU_PCI_VGA_IO_HI].mem);
|
&vdev->vga.region[QEMU_PCI_VGA_IO_HI].mem);
|
||||||
|
vfio_vga_quirk_setup(vdev);
|
||||||
}
|
}
|
||||||
}
|
}
|
||||||
|
|
||||||
@ -1611,6 +2322,7 @@ static void vfio_unmap_bars(VFIODevice *vdev)
|
|||||||
}
|
}
|
||||||
|
|
||||||
if (vdev->has_vga) {
|
if (vdev->has_vga) {
|
||||||
|
vfio_vga_quirk_teardown(vdev);
|
||||||
pci_unregister_vga(&vdev->pdev);
|
pci_unregister_vga(&vdev->pdev);
|
||||||
memory_region_destroy(&vdev->vga.region[QEMU_PCI_VGA_MEM].mem);
|
memory_region_destroy(&vdev->vga.region[QEMU_PCI_VGA_MEM].mem);
|
||||||
memory_region_destroy(&vdev->vga.region[QEMU_PCI_VGA_IO_LO].mem);
|
memory_region_destroy(&vdev->vga.region[QEMU_PCI_VGA_IO_LO].mem);
|
||||||
@ -2104,6 +2816,7 @@ static int vfio_get_device(VFIOGroup *group, const char *name, VFIODevice *vdev)
|
|||||||
vdev->bars[i].fd_offset = reg_info.offset;
|
vdev->bars[i].fd_offset = reg_info.offset;
|
||||||
vdev->bars[i].fd = vdev->fd;
|
vdev->bars[i].fd = vdev->fd;
|
||||||
vdev->bars[i].nr = i;
|
vdev->bars[i].nr = i;
|
||||||
|
QLIST_INIT(&vdev->bars[i].quirks);
|
||||||
}
|
}
|
||||||
|
|
||||||
reg_info.index = VFIO_PCI_ROM_REGION_INDEX;
|
reg_info.index = VFIO_PCI_ROM_REGION_INDEX;
|
||||||
@ -2169,12 +2882,15 @@ static int vfio_get_device(VFIOGroup *group, const char *name, VFIODevice *vdev)
|
|||||||
|
|
||||||
vdev->vga.region[QEMU_PCI_VGA_MEM].offset = QEMU_PCI_VGA_MEM_BASE;
|
vdev->vga.region[QEMU_PCI_VGA_MEM].offset = QEMU_PCI_VGA_MEM_BASE;
|
||||||
vdev->vga.region[QEMU_PCI_VGA_MEM].nr = QEMU_PCI_VGA_MEM;
|
vdev->vga.region[QEMU_PCI_VGA_MEM].nr = QEMU_PCI_VGA_MEM;
|
||||||
|
QLIST_INIT(&vdev->vga.region[QEMU_PCI_VGA_MEM].quirks);
|
||||||
|
|
||||||
vdev->vga.region[QEMU_PCI_VGA_IO_LO].offset = QEMU_PCI_VGA_IO_LO_BASE;
|
vdev->vga.region[QEMU_PCI_VGA_IO_LO].offset = QEMU_PCI_VGA_IO_LO_BASE;
|
||||||
vdev->vga.region[QEMU_PCI_VGA_IO_LO].nr = QEMU_PCI_VGA_IO_LO;
|
vdev->vga.region[QEMU_PCI_VGA_IO_LO].nr = QEMU_PCI_VGA_IO_LO;
|
||||||
|
QLIST_INIT(&vdev->vga.region[QEMU_PCI_VGA_IO_LO].quirks);
|
||||||
|
|
||||||
vdev->vga.region[QEMU_PCI_VGA_IO_HI].offset = QEMU_PCI_VGA_IO_HI_BASE;
|
vdev->vga.region[QEMU_PCI_VGA_IO_HI].offset = QEMU_PCI_VGA_IO_HI_BASE;
|
||||||
vdev->vga.region[QEMU_PCI_VGA_IO_HI].nr = QEMU_PCI_VGA_IO_HI;
|
vdev->vga.region[QEMU_PCI_VGA_IO_HI].nr = QEMU_PCI_VGA_IO_HI;
|
||||||
|
QLIST_INIT(&vdev->vga.region[QEMU_PCI_VGA_IO_HI].quirks);
|
||||||
|
|
||||||
vdev->has_vga = true;
|
vdev->has_vga = true;
|
||||||
}
|
}
|
||||||
|
|||||||
Loading…
Reference in New Issue
Block a user