target/ppc: Rename PATB/PATBE -> PATE

That "b" means "base address" and thus shouldn't be in the name
of actual entries and related constants.

This patch keeps the synthetic patb_entry field of the spapr
virtual hypervisor unchanged until I figure out if that has
an impact on the migration stream.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20190215170029.15641-11-clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This commit is contained in:
Benjamin Herrenschmidt 2019-02-15 18:00:27 +01:00 committed by David Gibson
parent c4dae9cd37
commit 79825f4d58
6 changed files with 54 additions and 31 deletions

View File

@ -1420,11 +1420,13 @@ void spapr_set_all_lpcrs(target_ulong value, target_ulong mask)
}
}
static uint64_t spapr_get_patbe(PPCVirtualHypervisor *vhyp)
static void spapr_get_pate(PPCVirtualHypervisor *vhyp, ppc_v3_pate_t *entry)
{
sPAPRMachineState *spapr = SPAPR_MACHINE(vhyp);
return spapr->patb_entry;
/* Copy PATE1:GR into PATE0:HR */
entry->dw0 = spapr->patb_entry & PATE0_HR;
entry->dw1 = spapr->patb_entry;
}
#define HPTE(_table, _i) (void *)(((uint64_t *)(_table)) + ((_i) * 2))
@ -1667,17 +1669,21 @@ static void spapr_machine_reset(void)
if (kvm_enabled() && kvmppc_has_cap_mmu_radix() &&
ppc_type_check_compat(machine->cpu_type, CPU_POWERPC_LOGICAL_3_00, 0,
spapr->max_compat_pvr)) {
/* If using KVM with radix mode available, VCPUs can be started
/*
* If using KVM with radix mode available, VCPUs can be started
* without a HPT because KVM will start them in radix mode.
* Set the GR bit in PATB so that we know there is no HPT. */
spapr->patb_entry = PATBE1_GR;
* Set the GR bit in PATE so that we know there is no HPT.
*/
spapr->patb_entry = PATE1_GR;
spapr_set_all_lpcrs(LPCR_HR | LPCR_UPRT, LPCR_HR | LPCR_UPRT);
} else {
spapr_setup_hpt_and_vrma(spapr);
}
/* if this reset wasn't generated by CAS, we should reset our
* negotiated options and start from scratch */
/*
* If this reset wasn't generated by CAS, we should reset our
* negotiated options and start from scratch
*/
if (!spapr->cas_reboot) {
spapr_ovec_cleanup(spapr->ov5_cas);
spapr->ov5_cas = spapr_ovec_new();
@ -1827,7 +1833,7 @@ static int spapr_post_load(void *opaque, int version_id)
if (kvm_enabled() && spapr->patb_entry) {
PowerPCCPU *cpu = POWERPC_CPU(first_cpu);
bool radix = !!(spapr->patb_entry & PATBE1_GR);
bool radix = !!(spapr->patb_entry & PATE1_GR);
bool gtse = !!(cpu->env.spr[SPR_LPCR] & LPCR_GTSE);
/*
@ -4118,7 +4124,7 @@ static void spapr_machine_class_init(ObjectClass *oc, void *data)
vhc->map_hptes = spapr_map_hptes;
vhc->unmap_hptes = spapr_unmap_hptes;
vhc->store_hpte = spapr_store_hpte;
vhc->get_patbe = spapr_get_patbe;
vhc->get_pate = spapr_get_pate;
vhc->encode_hpt_for_kvm_pr = spapr_encode_hpt_for_kvm_pr;
xic->ics_get = spapr_ics_get;
xic->ics_resend = spapr_ics_resend;

View File

@ -1311,12 +1311,12 @@ static void spapr_check_setup_free_hpt(sPAPRMachineState *spapr,
* later and so assumed radix and now it's called H_REG_PROC_TBL
*/
if ((patbe_old & PATBE1_GR) == (patbe_new & PATBE1_GR)) {
if ((patbe_old & PATE1_GR) == (patbe_new & PATE1_GR)) {
/* We assume RADIX, so this catches all the "Do Nothing" cases */
} else if (!(patbe_old & PATBE1_GR)) {
} else if (!(patbe_old & PATE1_GR)) {
/* HASH->RADIX : Free HPT */
spapr_free_hpt(spapr);
} else if (!(patbe_new & PATBE1_GR)) {
} else if (!(patbe_new & PATE1_GR)) {
/* RADIX->HASH || NOTHING->HASH : Allocate HPT */
spapr_setup_hpt_and_vrma(spapr);
}
@ -1354,7 +1354,7 @@ static target_ulong h_register_process_table(PowerPCCPU *cpu,
} else if (table_size > 24) {
return H_P4;
}
cproc = PATBE1_GR | proc_tbl | table_size;
cproc = PATE1_GR | proc_tbl | table_size;
} else { /* Register new HPT process table */
if (flags & FLAG_HASH_PROC_TBL) { /* Hash with Segment Tables */
/* TODO - Not Supported */
@ -1373,13 +1373,15 @@ static target_ulong h_register_process_table(PowerPCCPU *cpu,
}
} else { /* Deregister current process table */
/* Set to benign value: (current GR) | 0. This allows
* deregistration in KVM to succeed even if the radix bit in flags
* doesn't match the radix bit in the old PATB. */
cproc = spapr->patb_entry & PATBE1_GR;
/*
* Set to benign value: (current GR) | 0. This allows
* deregistration in KVM to succeed even if the radix bit
* in flags doesn't match the radix bit in the old PATE.
*/
cproc = spapr->patb_entry & PATE1_GR;
}
} else { /* Maintain current registration */
if (!(flags & FLAG_RADIX) != !(spapr->patb_entry & PATBE1_GR)) {
if (!(flags & FLAG_RADIX) != !(spapr->patb_entry & PATE1_GR)) {
/* Technically caused by flag bits => H_PARAMETER */
return H_PARAMETER; /* Existing Process Table Mismatch */
}
@ -1616,7 +1618,7 @@ static target_ulong h_client_architecture_support(PowerPCCPU *cpu,
if (!spapr->cas_reboot) {
/* If spapr_machine_reset() did not set up a HPT but one is necessary
* (because the guest isn't going to use radix) then set it up here. */
if ((spapr->patb_entry & PATBE1_GR) && !guest_radix) {
if ((spapr->patb_entry & PATE1_GR) && !guest_radix) {
/* legacy hash or new hash: */
spapr_setup_hpt_and_vrma(spapr);
}

View File

@ -320,6 +320,10 @@ struct ppc_slb_t {
#define SEGMENT_SHIFT_1T 40
#define SEGMENT_MASK_1T (~((1ULL << SEGMENT_SHIFT_1T) - 1))
typedef struct ppc_v3_pate_t {
uint64_t dw0;
uint64_t dw1;
} ppc_v3_pate_t;
/*****************************************************************************/
/* Machine state register bits definition */
@ -1248,7 +1252,7 @@ struct PPCVirtualHypervisorClass {
hwaddr ptex, int n);
void (*store_hpte)(PPCVirtualHypervisor *vhyp, hwaddr ptex,
uint64_t pte0, uint64_t pte1);
uint64_t (*get_patbe)(PPCVirtualHypervisor *vhyp);
void (*get_pate)(PPCVirtualHypervisor *vhyp, ppc_v3_pate_t *entry);
target_ulong (*encode_hpt_for_kvm_pr)(PPCVirtualHypervisor *vhyp);
};

View File

@ -29,7 +29,16 @@
#define PTCR_PATS 0x000000000000001FULL /* Partition Table Size */
/* Partition Table Entry Fields */
#define PATBE1_GR 0x8000000000000000
#define PATE0_HR 0x8000000000000000
/*
* WARNING: This field doesn't actually exist in the final version of
* the architecture and is unused by hardware. However, qemu uses it
* as an indication of a radix guest in the pseudo-PATB entry that it
* maintains for SPAPR guests and in the migration stream, so we need
* to keep it around
*/
#define PATE1_GR 0x8000000000000000
/* Process Table Entry */
struct prtb_entry {

View File

@ -194,8 +194,9 @@ int ppc_radix64_handle_mmu_fault(PowerPCCPU *cpu, vaddr eaddr, int rwx,
PPCVirtualHypervisorClass *vhc =
PPC_VIRTUAL_HYPERVISOR_GET_CLASS(cpu->vhyp);
hwaddr raddr, pte_addr;
uint64_t lpid = 0, pid = 0, offset, size, patbe, prtbe0, pte;
uint64_t lpid = 0, pid = 0, offset, size, prtbe0, pte;
int page_size, prot, fault_cause = 0;
ppc_v3_pate_t pate;
assert((rwx == 0) || (rwx == 1) || (rwx == 2));
assert(!msr_hv); /* For now there is no Radix PowerNV Support */
@ -220,17 +221,17 @@ int ppc_radix64_handle_mmu_fault(PowerPCCPU *cpu, vaddr eaddr, int rwx,
}
/* Get Process Table */
patbe = vhc->get_patbe(cpu->vhyp);
vhc->get_pate(cpu->vhyp, &pate);
/* Index Process Table by PID to Find Corresponding Process Table Entry */
offset = pid * sizeof(struct prtb_entry);
size = 1ULL << ((patbe & PATBE1_R_PRTS) + 12);
size = 1ULL << ((pate.dw1 & PATE1_R_PRTS) + 12);
if (offset >= size) {
/* offset exceeds size of the process table */
ppc_radix64_raise_si(cpu, rwx, eaddr, DSISR_NOPTE);
return 1;
}
prtbe0 = ldq_phys(cs->as, (patbe & PATBE1_R_PRTB) + offset);
prtbe0 = ldq_phys(cs->as, (pate.dw1 & PATE1_R_PRTB) + offset);
/* Walk Radix Tree from Process Table Entry to Convert EA to RA */
page_size = PRTBE_R_GET_RTS(prtbe0);
@ -258,8 +259,9 @@ hwaddr ppc_radix64_get_phys_page_debug(PowerPCCPU *cpu, target_ulong eaddr)
PPCVirtualHypervisorClass *vhc =
PPC_VIRTUAL_HYPERVISOR_GET_CLASS(cpu->vhyp);
hwaddr raddr, pte_addr;
uint64_t lpid = 0, pid = 0, offset, size, patbe, prtbe0, pte;
uint64_t lpid = 0, pid = 0, offset, size, prtbe0, pte;
int page_size, fault_cause = 0;
ppc_v3_pate_t pate;
/* Handle Real Mode */
if (msr_dr == 0) {
@ -273,16 +275,16 @@ hwaddr ppc_radix64_get_phys_page_debug(PowerPCCPU *cpu, target_ulong eaddr)
}
/* Get Process Table */
patbe = vhc->get_patbe(cpu->vhyp);
vhc->get_pate(cpu->vhyp, &pate);
/* Index Process Table by PID to Find Corresponding Process Table Entry */
offset = pid * sizeof(struct prtb_entry);
size = 1ULL << ((patbe & PATBE1_R_PRTS) + 12);
size = 1ULL << ((pate.dw1 & PATE1_R_PRTS) + 12);
if (offset >= size) {
/* offset exceeds size of the process table */
return -1;
}
prtbe0 = ldq_phys(cs->as, (patbe & PATBE1_R_PRTB) + offset);
prtbe0 = ldq_phys(cs->as, (pate.dw1 & PATE1_R_PRTB) + offset);
/* Walk Radix Tree from Process Table Entry to Convert EA to RA */
page_size = PRTBE_R_GET_RTS(prtbe0);

View File

@ -12,8 +12,8 @@
#define R_EADDR_QUADRANT3 0xC000000000000000
/* Radix Partition Table Entry Fields */
#define PATBE1_R_PRTB 0x0FFFFFFFFFFFF000
#define PATBE1_R_PRTS 0x000000000000001F
#define PATE1_R_PRTB 0x0FFFFFFFFFFFF000
#define PATE1_R_PRTS 0x000000000000001F
/* Radix Process Table Entry Fields */
#define PRTBE_R_GET_RTS(rts) \