ast2400: add SMC controllers (FMC and SPI)
The Aspeed AST2400 soc includes a static memory controller for the BMC which supports NOR, NAND and SPI flash memory modules. This controller has two modes : the SMC for the legacy interface which supports only one module and the FMC for the new interface which supports up to five modules. The AST2400 also includes a SPI only controller used for the host firmware, commonly called BIOS on Intel. It can be used in three mode : a SPI master, SPI slave and SPI pass-through Below is the initial framework for the SMC controller (FMC mode only) and the SPI controller: the sysbus object, MMIO for registers configuration and controls. Each controller has a SPI bus and a configurable number of CS lines for SPI flash slaves. The differences between the controllers are small, so they are abstracted using indirections on the register numbers. Only SPI flash modules are supported. Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-id: 1467138270-32481-7-git-send-email-clg@kaod.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> [PMM: added one missing error_propagate] Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This commit is contained in:
Cédric Le Goater
Peter Maydell
parent
73bce5187b
commit
7c1c69bca4
|
|
@ -23,6 +23,9 @@
|
|||
#define AST2400_UART_5_BASE 0x00184000
|
||||
#define AST2400_IOMEM_SIZE 0x00200000
|
||||
#define AST2400_IOMEM_BASE 0x1E600000
|
||||
#define AST2400_SMC_BASE AST2400_IOMEM_BASE /* Legacy SMC */
|
||||
#define AST2400_FMC_BASE 0X1E620000
|
||||
#define AST2400_SPI_BASE 0X1E630000
|
||||
#define AST2400_VIC_BASE 0x1E6C0000
|
||||
#define AST2400_SCU_BASE 0x1E6E2000
|
||||
#define AST2400_TIMER_BASE 0x1E782000
|
||||
|
|
@ -85,13 +88,21 @@ static void ast2400_init(Object *obj)
|
|||
"hw-strap1", &error_abort);
|
||||
object_property_add_alias(obj, "hw-strap2", OBJECT(&s->scu),
|
||||
"hw-strap2", &error_abort);
|
||||
|
||||
object_initialize(&s->smc, sizeof(s->smc), "aspeed.smc.fmc");
|
||||
object_property_add_child(obj, "smc", OBJECT(&s->smc), NULL);
|
||||
qdev_set_parent_bus(DEVICE(&s->smc), sysbus_get_default());
|
||||
|
||||
object_initialize(&s->spi, sizeof(s->spi), "aspeed.smc.spi");
|
||||
object_property_add_child(obj, "spi", OBJECT(&s->spi), NULL);
|
||||
qdev_set_parent_bus(DEVICE(&s->spi), sysbus_get_default());
|
||||
}
|
||||
|
||||
static void ast2400_realize(DeviceState *dev, Error **errp)
|
||||
{
|
||||
int i;
|
||||
AST2400State *s = AST2400(dev);
|
||||
Error *err = NULL;
|
||||
Error *err = NULL, *local_err = NULL;
|
||||
|
||||
/* IO space */
|
||||
memory_region_init_io(&s->iomem, NULL, &ast2400_io_ops, NULL,
|
||||
|
|
@ -147,6 +158,28 @@ static void ast2400_realize(DeviceState *dev, Error **errp)
|
|||
sysbus_mmio_map(SYS_BUS_DEVICE(&s->i2c), 0, AST2400_I2C_BASE);
|
||||
sysbus_connect_irq(SYS_BUS_DEVICE(&s->i2c), 0,
|
||||
qdev_get_gpio_in(DEVICE(&s->vic), 12));
|
||||
|
||||
/* SMC */
|
||||
object_property_set_int(OBJECT(&s->smc), 1, "num-cs", &err);
|
||||
object_property_set_bool(OBJECT(&s->smc), true, "realized", &local_err);
|
||||
error_propagate(&err, local_err);
|
||||
if (err) {
|
||||
error_propagate(errp, err);
|
||||
return;
|
||||
}
|
||||
sysbus_mmio_map(SYS_BUS_DEVICE(&s->smc), 0, AST2400_FMC_BASE);
|
||||
sysbus_connect_irq(SYS_BUS_DEVICE(&s->smc), 0,
|
||||
qdev_get_gpio_in(DEVICE(&s->vic), 19));
|
||||
|
||||
/* SPI */
|
||||
object_property_set_int(OBJECT(&s->spi), 1, "num-cs", &err);
|
||||
object_property_set_bool(OBJECT(&s->spi), true, "realized", &local_err);
|
||||
error_propagate(&err, local_err);
|
||||
if (err) {
|
||||
error_propagate(errp, err);
|
||||
return;
|
||||
}
|
||||
sysbus_mmio_map(SYS_BUS_DEVICE(&s->spi), 0, AST2400_SPI_BASE);
|
||||
}
|
||||
|
||||
static void ast2400_class_init(ObjectClass *oc, void *data)
|
||||
|
|
|
|||
|
|
@ -2,6 +2,7 @@ common-obj-$(CONFIG_PL022) += pl022.o
|
|||
common-obj-$(CONFIG_SSI) += ssi.o
|
||||
common-obj-$(CONFIG_XILINX_SPI) += xilinx_spi.o
|
||||
common-obj-$(CONFIG_XILINX_SPIPS) += xilinx_spips.o
|
||||
common-obj-$(CONFIG_ASPEED_SOC) += aspeed_smc.o
|
||||
|
||||
obj-$(CONFIG_OMAP) += omap_spi.o
|
||||
obj-$(CONFIG_IMX) += imx_spi.o
|
||||
|
|
|
|||
|
|
@ -0,0 +1,326 @@
|
|||
/*
|
||||
* ASPEED AST2400 SMC Controller (SPI Flash Only)
|
||||
*
|
||||
* Copyright (C) 2016 IBM Corp.
|
||||
*
|
||||
* Permission is hereby granted, free of charge, to any person obtaining a copy
|
||||
* of this software and associated documentation files (the "Software"), to deal
|
||||
* in the Software without restriction, including without limitation the rights
|
||||
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
|
||||
* copies of the Software, and to permit persons to whom the Software is
|
||||
* furnished to do so, subject to the following conditions:
|
||||
*
|
||||
* The above copyright notice and this permission notice shall be included in
|
||||
* all copies or substantial portions of the Software.
|
||||
*
|
||||
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
|
||||
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
|
||||
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
|
||||
* THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
|
||||
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
|
||||
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
|
||||
* THE SOFTWARE.
|
||||
*/
|
||||
|
||||
#include "qemu/osdep.h"
|
||||
#include "hw/sysbus.h"
|
||||
#include "sysemu/sysemu.h"
|
||||
#include "qemu/log.h"
|
||||
#include "include/qemu/error-report.h"
|
||||
#include "exec/address-spaces.h"
|
||||
|
||||
#include "hw/ssi/aspeed_smc.h"
|
||||
|
||||
/* CE Type Setting Register */
|
||||
#define R_CONF (0x00 / 4)
|
||||
#define CONF_LEGACY_DISABLE (1 << 31)
|
||||
#define CONF_ENABLE_W4 20
|
||||
#define CONF_ENABLE_W3 19
|
||||
#define CONF_ENABLE_W2 18
|
||||
#define CONF_ENABLE_W1 17
|
||||
#define CONF_ENABLE_W0 16
|
||||
#define CONF_FLASH_TYPE4 9
|
||||
#define CONF_FLASH_TYPE3 7
|
||||
#define CONF_FLASH_TYPE2 5
|
||||
#define CONF_FLASH_TYPE1 3
|
||||
#define CONF_FLASH_TYPE0 1
|
||||
|
||||
/* CE Control Register */
|
||||
#define R_CE_CTRL (0x04 / 4)
|
||||
#define CTRL_EXTENDED4 4 /* 32 bit addressing for SPI */
|
||||
#define CTRL_EXTENDED3 3 /* 32 bit addressing for SPI */
|
||||
#define CTRL_EXTENDED2 2 /* 32 bit addressing for SPI */
|
||||
#define CTRL_EXTENDED1 1 /* 32 bit addressing for SPI */
|
||||
#define CTRL_EXTENDED0 0 /* 32 bit addressing for SPI */
|
||||
|
||||
/* Interrupt Control and Status Register */
|
||||
#define R_INTR_CTRL (0x08 / 4)
|
||||
#define INTR_CTRL_DMA_STATUS (1 << 11)
|
||||
#define INTR_CTRL_CMD_ABORT_STATUS (1 << 10)
|
||||
#define INTR_CTRL_WRITE_PROTECT_STATUS (1 << 9)
|
||||
#define INTR_CTRL_DMA_EN (1 << 3)
|
||||
#define INTR_CTRL_CMD_ABORT_EN (1 << 2)
|
||||
#define INTR_CTRL_WRITE_PROTECT_EN (1 << 1)
|
||||
|
||||
/* CEx Control Register */
|
||||
#define R_CTRL0 (0x10 / 4)
|
||||
#define CTRL_CMD_SHIFT 16
|
||||
#define CTRL_CMD_MASK 0xff
|
||||
#define CTRL_CE_STOP_ACTIVE (1 << 2)
|
||||
#define CTRL_CMD_MODE_MASK 0x3
|
||||
#define CTRL_READMODE 0x0
|
||||
#define CTRL_FREADMODE 0x1
|
||||
#define CTRL_WRITEMODE 0x2
|
||||
#define CTRL_USERMODE 0x3
|
||||
#define R_CTRL1 (0x14 / 4)
|
||||
#define R_CTRL2 (0x18 / 4)
|
||||
#define R_CTRL3 (0x1C / 4)
|
||||
#define R_CTRL4 (0x20 / 4)
|
||||
|
||||
/* CEx Segment Address Register */
|
||||
#define R_SEG_ADDR0 (0x30 / 4)
|
||||
#define SEG_SIZE_SHIFT 24 /* 8MB units */
|
||||
#define SEG_SIZE_MASK 0x7f
|
||||
#define SEG_START_SHIFT 16 /* address bit [A29-A23] */
|
||||
#define SEG_START_MASK 0x7f
|
||||
#define R_SEG_ADDR1 (0x34 / 4)
|
||||
#define R_SEG_ADDR2 (0x38 / 4)
|
||||
#define R_SEG_ADDR3 (0x3C / 4)
|
||||
#define R_SEG_ADDR4 (0x40 / 4)
|
||||
|
||||
/* Misc Control Register #1 */
|
||||
#define R_MISC_CTRL1 (0x50 / 4)
|
||||
|
||||
/* Misc Control Register #2 */
|
||||
#define R_MISC_CTRL2 (0x54 / 4)
|
||||
|
||||
/* DMA Control/Status Register */
|
||||
#define R_DMA_CTRL (0x80 / 4)
|
||||
#define DMA_CTRL_DELAY_MASK 0xf
|
||||
#define DMA_CTRL_DELAY_SHIFT 8
|
||||
#define DMA_CTRL_FREQ_MASK 0xf
|
||||
#define DMA_CTRL_FREQ_SHIFT 4
|
||||
#define DMA_CTRL_MODE (1 << 3)
|
||||
#define DMA_CTRL_CKSUM (1 << 2)
|
||||
#define DMA_CTRL_DIR (1 << 1)
|
||||
#define DMA_CTRL_EN (1 << 0)
|
||||
|
||||
/* DMA Flash Side Address */
|
||||
#define R_DMA_FLASH_ADDR (0x84 / 4)
|
||||
|
||||
/* DMA DRAM Side Address */
|
||||
#define R_DMA_DRAM_ADDR (0x88 / 4)
|
||||
|
||||
/* DMA Length Register */
|
||||
#define R_DMA_LEN (0x8C / 4)
|
||||
|
||||
/* Checksum Calculation Result */
|
||||
#define R_DMA_CHECKSUM (0x90 / 4)
|
||||
|
||||
/* Misc Control Register #2 */
|
||||
#define R_TIMINGS (0x94 / 4)
|
||||
|
||||
/* SPI controller registers and bits */
|
||||
#define R_SPI_CONF (0x00 / 4)
|
||||
#define SPI_CONF_ENABLE_W0 0
|
||||
#define R_SPI_CTRL0 (0x4 / 4)
|
||||
#define R_SPI_MISC_CTRL (0x10 / 4)
|
||||
#define R_SPI_TIMINGS (0x14 / 4)
|
||||
|
||||
static const AspeedSMCController controllers[] = {
|
||||
{ "aspeed.smc.smc", R_CONF, R_CE_CTRL, R_CTRL0, R_TIMINGS,
|
||||
CONF_ENABLE_W0, 5 },
|
||||
{ "aspeed.smc.fmc", R_CONF, R_CE_CTRL, R_CTRL0, R_TIMINGS,
|
||||
CONF_ENABLE_W0, 5 },
|
||||
{ "aspeed.smc.spi", R_SPI_CONF, 0xff, R_SPI_CTRL0, R_SPI_TIMINGS,
|
||||
SPI_CONF_ENABLE_W0, 1 },
|
||||
};
|
||||
|
||||
static bool aspeed_smc_is_ce_stop_active(const AspeedSMCState *s, int cs)
|
||||
{
|
||||
return s->regs[s->r_ctrl0 + cs] & CTRL_CE_STOP_ACTIVE;
|
||||
}
|
||||
|
||||
static void aspeed_smc_update_cs(const AspeedSMCState *s)
|
||||
{
|
||||
int i;
|
||||
|
||||
for (i = 0; i < s->num_cs; ++i) {
|
||||
qemu_set_irq(s->cs_lines[i], aspeed_smc_is_ce_stop_active(s, i));
|
||||
}
|
||||
}
|
||||
|
||||
static void aspeed_smc_reset(DeviceState *d)
|
||||
{
|
||||
AspeedSMCState *s = ASPEED_SMC(d);
|
||||
int i;
|
||||
|
||||
memset(s->regs, 0, sizeof s->regs);
|
||||
|
||||
/* Unselect all slaves */
|
||||
for (i = 0; i < s->num_cs; ++i) {
|
||||
s->regs[s->r_ctrl0 + i] |= CTRL_CE_STOP_ACTIVE;
|
||||
}
|
||||
|
||||
aspeed_smc_update_cs(s);
|
||||
}
|
||||
|
||||
static bool aspeed_smc_is_implemented(AspeedSMCState *s, hwaddr addr)
|
||||
{
|
||||
return (addr == s->r_conf || addr == s->r_timings || addr == s->r_ce_ctrl ||
|
||||
(addr >= s->r_ctrl0 && addr < s->r_ctrl0 + s->num_cs));
|
||||
}
|
||||
|
||||
static uint64_t aspeed_smc_read(void *opaque, hwaddr addr, unsigned int size)
|
||||
{
|
||||
AspeedSMCState *s = ASPEED_SMC(opaque);
|
||||
|
||||
addr >>= 2;
|
||||
|
||||
if (addr >= ARRAY_SIZE(s->regs)) {
|
||||
qemu_log_mask(LOG_GUEST_ERROR,
|
||||
"%s: Out-of-bounds read at 0x%" HWADDR_PRIx "\n",
|
||||
__func__, addr);
|
||||
return 0;
|
||||
}
|
||||
|
||||
if (!aspeed_smc_is_implemented(s, addr)) {
|
||||
qemu_log_mask(LOG_UNIMP, "%s: not implemented: 0x%" HWADDR_PRIx "\n",
|
||||
__func__, addr);
|
||||
return 0;
|
||||
}
|
||||
|
||||
return s->regs[addr];
|
||||
}
|
||||
|
||||
static void aspeed_smc_write(void *opaque, hwaddr addr, uint64_t data,
|
||||
unsigned int size)
|
||||
{
|
||||
AspeedSMCState *s = ASPEED_SMC(opaque);
|
||||
uint32_t value = data;
|
||||
|
||||
addr >>= 2;
|
||||
|
||||
if (addr >= ARRAY_SIZE(s->regs)) {
|
||||
qemu_log_mask(LOG_GUEST_ERROR,
|
||||
"%s: Out-of-bounds write at 0x%" HWADDR_PRIx "\n",
|
||||
__func__, addr);
|
||||
return;
|
||||
}
|
||||
|
||||
if (!aspeed_smc_is_implemented(s, addr)) {
|
||||
qemu_log_mask(LOG_UNIMP, "%s: not implemented: 0x%" HWADDR_PRIx "\n",
|
||||
__func__, addr);
|
||||
return;
|
||||
}
|
||||
|
||||
/*
|
||||
* Not much to do apart from storing the value and set the cs
|
||||
* lines if the register is a controlling one.
|
||||
*/
|
||||
s->regs[addr] = value;
|
||||
if (addr >= s->r_ctrl0 && addr < s->r_ctrl0 + s->num_cs) {
|
||||
aspeed_smc_update_cs(s);
|
||||
}
|
||||
}
|
||||
|
||||
static const MemoryRegionOps aspeed_smc_ops = {
|
||||
.read = aspeed_smc_read,
|
||||
.write = aspeed_smc_write,
|
||||
.endianness = DEVICE_LITTLE_ENDIAN,
|
||||
.valid.unaligned = true,
|
||||
};
|
||||
|
||||
static void aspeed_smc_realize(DeviceState *dev, Error **errp)
|
||||
{
|
||||
SysBusDevice *sbd = SYS_BUS_DEVICE(dev);
|
||||
AspeedSMCState *s = ASPEED_SMC(dev);
|
||||
AspeedSMCClass *mc = ASPEED_SMC_GET_CLASS(s);
|
||||
int i;
|
||||
|
||||
s->ctrl = mc->ctrl;
|
||||
|
||||
/* keep a copy under AspeedSMCState to speed up accesses */
|
||||
s->r_conf = s->ctrl->r_conf;
|
||||
s->r_ce_ctrl = s->ctrl->r_ce_ctrl;
|
||||
s->r_ctrl0 = s->ctrl->r_ctrl0;
|
||||
s->r_timings = s->ctrl->r_timings;
|
||||
s->conf_enable_w0 = s->ctrl->conf_enable_w0;
|
||||
|
||||
/* Enforce some real HW limits */
|
||||
if (s->num_cs > s->ctrl->max_slaves) {
|
||||
qemu_log_mask(LOG_GUEST_ERROR, "%s: num_cs cannot exceed: %d\n",
|
||||
__func__, s->ctrl->max_slaves);
|
||||
s->num_cs = s->ctrl->max_slaves;
|
||||
}
|
||||
|
||||
s->spi = ssi_create_bus(dev, "spi");
|
||||
|
||||
/* Setup cs_lines for slaves */
|
||||
sysbus_init_irq(sbd, &s->irq);
|
||||
s->cs_lines = g_new0(qemu_irq, s->num_cs);
|
||||
ssi_auto_connect_slaves(dev, s->cs_lines, s->spi);
|
||||
|
||||
for (i = 0; i < s->num_cs; ++i) {
|
||||
sysbus_init_irq(sbd, &s->cs_lines[i]);
|
||||
}
|
||||
|
||||
aspeed_smc_reset(dev);
|
||||
|
||||
memory_region_init_io(&s->mmio, OBJECT(s), &aspeed_smc_ops, s,
|
||||
s->ctrl->name, ASPEED_SMC_R_MAX * 4);
|
||||
sysbus_init_mmio(sbd, &s->mmio);
|
||||
}
|
||||
|
||||
static const VMStateDescription vmstate_aspeed_smc = {
|
||||
.name = "aspeed.smc",
|
||||
.version_id = 1,
|
||||
.minimum_version_id = 1,
|
||||
.fields = (VMStateField[]) {
|
||||
VMSTATE_UINT32_ARRAY(regs, AspeedSMCState, ASPEED_SMC_R_MAX),
|
||||
VMSTATE_END_OF_LIST()
|
||||
}
|
||||
};
|
||||
|
||||
static Property aspeed_smc_properties[] = {
|
||||
DEFINE_PROP_UINT32("num-cs", AspeedSMCState, num_cs, 1),
|
||||
DEFINE_PROP_END_OF_LIST(),
|
||||
};
|
||||
|
||||
static void aspeed_smc_class_init(ObjectClass *klass, void *data)
|
||||
{
|
||||
DeviceClass *dc = DEVICE_CLASS(klass);
|
||||
AspeedSMCClass *mc = ASPEED_SMC_CLASS(klass);
|
||||
|
||||
dc->realize = aspeed_smc_realize;
|
||||
dc->reset = aspeed_smc_reset;
|
||||
dc->props = aspeed_smc_properties;
|
||||
dc->vmsd = &vmstate_aspeed_smc;
|
||||
mc->ctrl = data;
|
||||
}
|
||||
|
||||
static const TypeInfo aspeed_smc_info = {
|
||||
.name = TYPE_ASPEED_SMC,
|
||||
.parent = TYPE_SYS_BUS_DEVICE,
|
||||
.instance_size = sizeof(AspeedSMCState),
|
||||
.class_size = sizeof(AspeedSMCClass),
|
||||
.abstract = true,
|
||||
};
|
||||
|
||||
static void aspeed_smc_register_types(void)
|
||||
{
|
||||
int i;
|
||||
|
||||
type_register_static(&aspeed_smc_info);
|
||||
for (i = 0; i < ARRAY_SIZE(controllers); ++i) {
|
||||
TypeInfo ti = {
|
||||
.name = controllers[i].name,
|
||||
.parent = TYPE_ASPEED_SMC,
|
||||
.class_init = aspeed_smc_class_init,
|
||||
.class_data = (void *)&controllers[i],
|
||||
};
|
||||
type_register(&ti);
|
||||
}
|
||||
}
|
||||
|
||||
type_init(aspeed_smc_register_types)
|
||||
|
|
@ -17,6 +17,7 @@
|
|||
#include "hw/misc/aspeed_scu.h"
|
||||
#include "hw/timer/aspeed_timer.h"
|
||||
#include "hw/i2c/aspeed_i2c.h"
|
||||
#include "hw/ssi/aspeed_smc.h"
|
||||
|
||||
typedef struct AST2400State {
|
||||
/*< private >*/
|
||||
|
|
@ -29,6 +30,8 @@ typedef struct AST2400State {
|
|||
AspeedTimerCtrlState timerctrl;
|
||||
AspeedI2CState i2c;
|
||||
AspeedSCUState scu;
|
||||
AspeedSMCState smc;
|
||||
AspeedSMCState spi;
|
||||
} AST2400State;
|
||||
|
||||
#define TYPE_AST2400 "ast2400"
|
||||
|
|
|
|||
|
|
@ -0,0 +1,79 @@
|
|||
/*
|
||||
* ASPEED AST2400 SMC Controller (SPI Flash Only)
|
||||
*
|
||||
* Copyright (C) 2016 IBM Corp.
|
||||
*
|
||||
* Permission is hereby granted, free of charge, to any person obtaining a copy
|
||||
* of this software and associated documentation files (the "Software"), to deal
|
||||
* in the Software without restriction, including without limitation the rights
|
||||
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
|
||||
* copies of the Software, and to permit persons to whom the Software is
|
||||
* furnished to do so, subject to the following conditions:
|
||||
*
|
||||
* The above copyright notice and this permission notice shall be included in
|
||||
* all copies or substantial portions of the Software.
|
||||
*
|
||||
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
|
||||
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
|
||||
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
|
||||
* THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
|
||||
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
|
||||
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
|
||||
* THE SOFTWARE.
|
||||
*/
|
||||
|
||||
#ifndef ASPEED_SMC_H
|
||||
#define ASPEED_SMC_H
|
||||
|
||||
#include "hw/ssi/ssi.h"
|
||||
|
||||
typedef struct AspeedSMCController {
|
||||
const char *name;
|
||||
uint8_t r_conf;
|
||||
uint8_t r_ce_ctrl;
|
||||
uint8_t r_ctrl0;
|
||||
uint8_t r_timings;
|
||||
uint8_t conf_enable_w0;
|
||||
uint8_t max_slaves;
|
||||
} AspeedSMCController;
|
||||
|
||||
#define TYPE_ASPEED_SMC "aspeed.smc"
|
||||
#define ASPEED_SMC(obj) OBJECT_CHECK(AspeedSMCState, (obj), TYPE_ASPEED_SMC)
|
||||
#define ASPEED_SMC_CLASS(klass) \
|
||||
OBJECT_CLASS_CHECK(AspeedSMCClass, (klass), TYPE_ASPEED_SMC)
|
||||
#define ASPEED_SMC_GET_CLASS(obj) \
|
||||
OBJECT_GET_CLASS(AspeedSMCClass, (obj), TYPE_ASPEED_SMC)
|
||||
|
||||
typedef struct AspeedSMCClass {
|
||||
SysBusDevice parent_obj;
|
||||
const AspeedSMCController *ctrl;
|
||||
} AspeedSMCClass;
|
||||
|
||||
#define ASPEED_SMC_R_MAX (0x100 / 4)
|
||||
|
||||
typedef struct AspeedSMCState {
|
||||
SysBusDevice parent_obj;
|
||||
|
||||
const AspeedSMCController *ctrl;
|
||||
|
||||
MemoryRegion mmio;
|
||||
|
||||
qemu_irq irq;
|
||||
int irqline;
|
||||
|
||||
uint32_t num_cs;
|
||||
qemu_irq *cs_lines;
|
||||
|
||||
SSIBus *spi;
|
||||
|
||||
uint32_t regs[ASPEED_SMC_R_MAX];
|
||||
|
||||
/* depends on the controller type */
|
||||
uint8_t r_conf;
|
||||
uint8_t r_ce_ctrl;
|
||||
uint8_t r_ctrl0;
|
||||
uint8_t r_timings;
|
||||
uint8_t conf_enable_w0;
|
||||
} AspeedSMCState;
|
||||
|
||||
#endif /* ASPEED_SMC_H */
|
||||
Loading…
Reference in New Issue