diff --git a/docs/devel/qapi-code-gen.rst b/docs/devel/qapi-code-gen.rst
index 6804a4b596..f453bd3546 100644
--- a/docs/devel/qapi-code-gen.rst
+++ b/docs/devel/qapi-code-gen.rst
@@ -996,7 +996,8 @@ line "Features:", like this::
 
 A tagged section begins with a paragraph that starts with one of the
 following words: "Note:"/"Notes:", "Since:", "Example:"/"Examples:",
-"Returns:", "TODO:".  It ends with the start of a new section.
+"Returns:", "Errors:", "TODO:".  It ends with the start of a new
+section.
 
 The second and subsequent lines of tagged sections must be indented
 like this::
@@ -1007,6 +1008,9 @@ like this::
  #     Duis aute irure dolor in reprehenderit in voluptate velit esse
  #     cillum dolore eu fugiat nulla pariatur.
 
+"Returns" and "Errors" sections are only valid for commands.  They
+document the success and the error response, respectively.
+
 A "Since: x.y.z" tagged section lists the release that introduced the
 definition.
 
diff --git a/docs/devel/writing-monitor-commands.rst b/docs/devel/writing-monitor-commands.rst
index b6ee4fa063..930da5cd06 100644
--- a/docs/devel/writing-monitor-commands.rst
+++ b/docs/devel/writing-monitor-commands.rst
@@ -66,12 +66,13 @@ Then, in a different terminal::
          "version": {
              "qemu": {
                  "micro": 50,
-                 "minor": 15,
-                 "major": 0
+                 "minor": 2,
+                 "major": 8
              },
-             "package": ""
+             "package": ...
          },
          "capabilities": [
+             "oob"
          ]
      }
  }
@@ -107,10 +108,14 @@ The first step is defining the command in the appropriate QAPI schema
 module.  We pick module qapi/misc.json, and add the following line at
 the bottom::
 
+ ##
+ # @hello-world:
+ #
+ # Since: 9.0
+ ##
  { 'command': 'hello-world' }
 
-The "command" keyword defines a new QMP command. It's an JSON object. All
-schema entries are JSON objects. The line above will instruct the QAPI to
+The "command" keyword defines a new QMP command. It instructs QAPI to
 generate any prototypes and the necessary code to marshal and unmarshal
 protocol data.
 
@@ -132,57 +137,70 @@ There are a few things to be noticed:
 3. It takes an "Error \*\*" argument. This is required. Later we will see how to
    return errors and take additional arguments. The Error argument should not
    be touched if the command doesn't return errors
-4. We won't add the function's prototype. That's automatically done by the QAPI
+4. We won't add the function's prototype. That's automatically done by QAPI
 5. Printing to the terminal is discouraged for QMP commands, we do it here
    because it's the easiest way to demonstrate a QMP command
 
-You're done. Now build qemu, run it as suggested in the "Testing" section,
+You're done. Now build QEMU, run it as suggested in the "Testing" section,
 and then type the following QMP command::
 
  { "execute": "hello-world" }
 
-Then check the terminal running qemu and look for the "Hello, world" string. If
+Then check the terminal running QEMU and look for the "Hello, world" string. If
 you don't see it then something went wrong.
 
 
 Arguments
 ~~~~~~~~~
 
-Let's add an argument called "message" to our "hello-world" command. The new
-argument will contain the string to be printed to stdout. It's an optional
-argument, if it's not present we print our default "Hello, World" string.
+Let's add arguments to our "hello-world" command.
 
 The first change we have to do is to modify the command specification in the
 schema file to the following::
 
- { 'command': 'hello-world', 'data': { '*message': 'str' } }
+ ##
+ # @hello-world:
+ #
+ # @message: message to be printed (default: "Hello, world!")
+ #
+ # @times: how many times to print the message (default: 1)
+ #
+ # Since: 9.0
+ ##
+ { 'command': 'hello-world',
+   'data': { '*message': 'str', '*times': 'int' } }
 
-Notice the new 'data' member in the schema. It's an JSON object whose each
-element is an argument to the command in question. Also notice the asterisk,
-it's used to mark the argument optional (that means that you shouldn't use it
-for mandatory arguments). Finally, 'str' is the argument's type, which
-stands for "string". The QAPI also supports integers, booleans, enumerations
-and user defined types.
+Notice the new 'data' member in the schema. It specifies an argument
+'message' of QAPI type 'str', and an argument 'times' of QAPI type
+'int'.  Also notice the asterisk, it's used to mark the argument
+optional.
 
 Now, let's update our C implementation in monitor/qmp-cmds.c::
 
- void qmp_hello_world(const char *message, Error **errp)
+ void qmp_hello_world(const char *message, bool has_times, int64_t times,
+                      Error **errp)
  {
-     if (message) {
+     if (!message) {
+         message = "Hello, world";
+     }
+     if (!has_times) {
+         times = 1;
+     }
+
+     for (int i = 0; i < times; i++) {
          printf("%s\n", message);
-     } else {
-         printf("Hello, world\n");
      }
  }
 
 There are two important details to be noticed:
 
-1. All optional arguments are accompanied by a 'has\_' boolean, which is set
-   if the optional argument is present or false otherwise
+1. Optional arguments other than pointers are accompanied by a 'has\_'
+   boolean, which is set if the optional argument is present or false
+   otherwise
 2. The C implementation signature must follow the schema's argument ordering,
    which is defined by the "data" member
 
-Time to test our new version of the "hello-world" command. Build qemu, run it as
+Time to test our new version of the "hello-world" command. Build QEMU, run it as
 described in the "Testing" section and then send two commands::
 
  { "execute": "hello-world" }
@@ -191,13 +209,13 @@ described in the "Testing" section and then send two commands::
      }
  }
 
- { "execute": "hello-world", "arguments": { "message": "We love qemu" } }
+ { "execute": "hello-world", "arguments": { "message": "We love QEMU" } }
  {
      "return": {
      }
  }
 
-You should see "Hello, world" and "We love qemu" in the terminal running qemu,
+You should see "Hello, world" and "We love QEMU" in the terminal running QEMU,
 if you don't see these strings, then something went wrong.
 
 
@@ -227,7 +245,7 @@ The first argument to the error_setg() function is the Error pointer
 to pointer, which is passed to all QMP functions. The next argument is a human
 description of the error, this is a free-form printf-like string.
 
-Let's test the example above. Build qemu, run it as defined in the "Testing"
+Let's test the example above. Build QEMU, run it as defined in the "Testing"
 section, and then issue the following command::
 
  { "execute": "hello-world", "arguments": { "message": "all you need is love" } }
@@ -254,44 +272,14 @@ If the failure you want to report falls into one of the two cases above,
 use error_set() with a second argument of an ErrorClass value.
 
 
-Command Documentation
-~~~~~~~~~~~~~~~~~~~~~
-
-There's only one step missing to make "hello-world"'s implementation complete,
-and that's its documentation in the schema file.
-
-There are many examples of such documentation in the schema file already, but
-here goes "hello-world"'s new entry for qapi/misc.json::
-
- ##
- # @hello-world:
- #
- # Print a client provided string to the standard output stream.
- #
- # @message: string to be printed
- #
- # Returns: Nothing on success.
- #
- # Notes: if @message is not provided, the "Hello, world" string will
- #        be printed instead
- #
- # Since: <next qemu stable release, eg. 1.0>
- ##
- { 'command': 'hello-world', 'data': { '*message': 'str' } }
-
-Please, note that the "Returns" clause is optional if a command doesn't return
-any data nor any errors.
-
-
 Implementing the HMP command
 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 
 Now that the QMP command is in place, we can also make it available in the human
 monitor (HMP).
 
-With the introduction of the QAPI, HMP commands make QMP calls. Most of the
-time HMP commands are simple wrappers. All HMP commands implementation exist in
-the monitor/hmp-cmds.c file.
+With the introduction of QAPI, HMP commands make QMP calls. Most of the
+time HMP commands are simple wrappers.
 
 Here's the implementation of the "hello-world" HMP command::
 
@@ -306,18 +294,20 @@ Here's the implementation of the "hello-world" HMP command::
      }
  }
 
-Also, you have to add the function's prototype to the hmp.h file.
+Add it to monitor/hmp-cmds.c.  Also, add its prototype to
+include/monitor/hmp.h.
 
-There are three important points to be noticed:
+There are four important points to be noticed:
 
 1. The "mon" and "qdict" arguments are mandatory for all HMP functions. The
    former is the monitor object. The latter is how the monitor passes
    arguments entered by the user to the command implementation
-2. hmp_hello_world() performs error checking. In this example we just call
+2. We chose not to support the "times" argument in HMP
+3. hmp_hello_world() performs error checking. In this example we just call
    hmp_handle_error() which prints a message to the user, but we could do
    more, like taking different actions depending on the error
    qmp_hello_world() returns
-3. The "err" variable must be initialized to NULL before performing the
+4. The "err" variable must be initialized to NULL before performing the
    QMP call
 
 There's one last step to actually make the command available to monitor users,
@@ -340,17 +330,17 @@ To test this you have to open a user monitor and issue the "hello-world"
 command. It might be instructive to check the command's documentation with
 HMP's "help" command.
 
-Please, check the "-monitor" command-line option to know how to open a user
+Please check the "-monitor" command-line option to know how to open a user
 monitor.
 
 
 Writing more complex commands
 -----------------------------
 
-A QMP command is capable of returning any data the QAPI supports like integers,
+A QMP command is capable of returning any data QAPI supports like integers,
 strings, booleans, enumerations and user defined types.
 
-In this section we will focus on user defined types. Please, check the QAPI
+In this section we will focus on user defined types. Please check the QAPI
 documentation for information about the other types.
 
 
@@ -372,7 +362,7 @@ data, it is not expected that machines will need to parse the result.
 The overhead of defining a fine grained QAPI type for the data may not
 be justified by the potential benefit. In such cases, it is permitted
 to have a command return a simple string that contains formatted data,
-however, it is mandatory for the command to use the 'x-' name prefix.
+however, it is mandatory for the command to be marked unstable.
 This indicates that the command is not guaranteed to be long term
 stable / liable to change in future and is not following QAPI design
 best practices. An example where this approach is taken is the QMP
@@ -386,302 +376,207 @@ an illustration.
 User Defined Types
 ~~~~~~~~~~~~~~~~~~
 
-FIXME This example needs to be redone after commit 6d32717
+For this example we will write the query-option-roms command, which
+returns information about ROMs loaded into the option ROM space. For
+more information about it, please check the "-option-rom" command-line
+option.
 
-For this example we will write the query-alarm-clock command, which returns
-information about QEMU's timer alarm. For more information about it, please
-check the "-clock" command-line option.
-
-We want to return two pieces of information. The first one is the alarm clock's
-name. The second one is when the next alarm will fire. The former information is
-returned as a string, the latter is an integer in nanoseconds (which is not
-very useful in practice, as the timer has probably already fired when the
-information reaches the client).
-
-The best way to return that data is to create a new QAPI type, as shown below::
+For each option ROM, we want to return two pieces of information: the
+ROM image's file name, and its bootindex, if any.  We need to create a
+new QAPI type for that, as shown below::
 
  ##
- # @QemuAlarmClock
+ # @OptionRomInfo:
  #
- # QEMU alarm clock information.
+ # @filename: option ROM image file name
  #
- # @clock-name: The alarm clock method's name.
+ # @bootindex: option ROM's bootindex
  #
- # @next-deadline: The time (in nanoseconds) the next alarm will fire.
- #
- # Since: 1.0
+ # Since: 9.0
  ##
- { 'type': 'QemuAlarmClock',
-   'data': { 'clock-name': 'str', '*next-deadline': 'int' } }
+ { 'struct': 'OptionRomInfo',
+   'data': { 'filename': 'str', '*bootindex': 'int' } }
 
-The "type" keyword defines a new QAPI type. Its "data" member contains the
-type's members. In this example our members are the "clock-name" and the
-"next-deadline" one, which is optional.
+The "struct" keyword defines a new QAPI type. Its "data" member
+contains the type's members. In this example our members are
+"filename" and "bootindex". The latter is optional.
 
-Now let's define the query-alarm-clock command::
+Now let's define the query-option-roms command::
 
  ##
- # @query-alarm-clock
+ # @query-option-roms:
  #
- # Return information about QEMU's alarm clock.
+ # Query information on ROMs loaded into the option ROM space.
  #
- # Returns a @QemuAlarmClock instance describing the alarm clock method
- # being currently used by QEMU (this is usually set by the '-clock'
- # command-line option).
+ # Returns: OptionRomInfo
  #
- # Since: 1.0
+ # Since: 9.0
  ##
- { 'command': 'query-alarm-clock', 'returns': 'QemuAlarmClock' }
+ { 'command': 'query-option-roms',
+   'returns': ['OptionRomInfo'] }
 
 Notice the "returns" keyword. As its name suggests, it's used to define the
 data returned by a command.
 
-It's time to implement the qmp_query_alarm_clock() function, you can put it
-in the qemu-timer.c file::
+Notice the syntax ['OptionRomInfo']". This should be read as "returns
+a list of OptionRomInfo".
 
- QemuAlarmClock *qmp_query_alarm_clock(Error **errp)
+It's time to implement the qmp_query_option_roms() function.  Add to
+monitor/qmp-cmds.c::
+
+ OptionRomInfoList *qmp_query_option_roms(Error **errp)
  {
-     QemuAlarmClock *clock;
-     int64_t deadline;
+     OptionRomInfoList *info_list = NULL;
+     OptionRomInfoList **tailp = &info_list;
+     OptionRomInfo *info;
 
-     clock = g_malloc0(sizeof(*clock));
-
-     deadline = qemu_next_alarm_deadline();
-     if (deadline > 0) {
-         clock->has_next_deadline = true;
-         clock->next_deadline = deadline;
+     for (int i = 0; i < nb_option_roms; i++) {
+         info = g_malloc0(sizeof(*info));
+         info->filename = g_strdup(option_rom[i].name);
+         info->has_bootindex = option_rom[i].bootindex >= 0;
+         if (info->has_bootindex) {
+             info->bootindex = option_rom[i].bootindex;
+         }
+         QAPI_LIST_APPEND(tailp, info);
      }
-     clock->clock_name = g_strdup(alarm_timer->name);
 
-     return clock;
+     return info_list;
  }
 
 There are a number of things to be noticed:
 
-1. The QemuAlarmClock type is automatically generated by the QAPI framework,
-   its members correspond to the type's specification in the schema file
-2. As specified in the schema file, the function returns a QemuAlarmClock
-   instance and takes no arguments (besides the "errp" one, which is mandatory
-   for all QMP functions)
-3. The "clock" variable (which will point to our QAPI type instance) is
-   allocated by the regular g_malloc0() function. Note that we chose to
-   initialize the memory to zero. This is recommended for all QAPI types, as
-   it helps avoiding bad surprises (specially with booleans)
-4. Remember that "next_deadline" is optional? Non-pointer optional
-   members have a 'has_TYPE_NAME' member that should be properly set
+1. Type OptionRomInfo is automatically generated by the QAPI framework,
+   its members correspond to the type's specification in the schema
+   file
+2. Type OptionRomInfoList is also generated.  It's a singly linked
+   list.
+3. As specified in the schema file, the function returns a
+   OptionRomInfoList, and takes no arguments (besides the "errp" one,
+   which is mandatory for all QMP functions)
+4. The returned object is dynamically allocated
+5. All strings are dynamically allocated. This is so because QAPI also
+   generates a function to free its types and it cannot distinguish
+   between dynamically or statically allocated strings
+6. Remember that "bootindex" is optional? As a non-pointer optional
+   member, it comes with a 'has_bootindex' member that needs to be set
    by the implementation, as shown above
-5. Even static strings, such as "alarm_timer->name", should be dynamically
-   allocated by the implementation. This is so because the QAPI also generates
-   a function to free its types and it cannot distinguish between dynamically
-   or statically allocated strings
-6. You have to include "qapi/qapi-commands-misc.h" in qemu-timer.c
 
-Time to test the new command. Build qemu, run it as described in the "Testing"
+Time to test the new command. Build QEMU, run it as described in the "Testing"
 section and try this::
 
- { "execute": "query-alarm-clock" }
+ { "execute": "query-option-rom" }
  {
-     "return": {
-         "next-deadline": 2368219,
-         "clock-name": "dynticks"
-     }
+     "return": [
+         {
+             "filename": "kvmvapic.bin"
+         }
+     ]
  }
 
 
 The HMP command
 ~~~~~~~~~~~~~~~
 
-Here's the HMP counterpart of the query-alarm-clock command::
+Here's the HMP counterpart of the query-option-roms command::
 
- void hmp_info_alarm_clock(Monitor *mon)
+ void hmp_info_option_roms(Monitor *mon, const QDict *qdict)
  {
-     QemuAlarmClock *clock;
      Error *err = NULL;
+     OptionRomInfoList *info_list, *tail;
+     OptionRomInfo *info;
 
-     clock = qmp_query_alarm_clock(&err);
+     info_list = qmp_query_option_roms(&err);
      if (hmp_handle_error(mon, err)) {
          return;
      }
 
-     monitor_printf(mon, "Alarm clock method in use: '%s'\n", clock->clock_name);
-     if (clock->has_next_deadline) {
-         monitor_printf(mon, "Next alarm will fire in %" PRId64 " nanoseconds\n",
-                        clock->next_deadline);
-     }
-
-    qapi_free_QemuAlarmClock(clock);
- }
-
-It's important to notice that hmp_info_alarm_clock() calls
-qapi_free_QemuAlarmClock() to free the data returned by qmp_query_alarm_clock().
-For user defined types, the QAPI will generate a qapi_free_QAPI_TYPE_NAME()
-function and that's what you have to use to free the types you define and
-qapi_free_QAPI_TYPE_NAMEList() for list types (explained in the next section).
-If the QMP call returns a string, then you should g_free() to free it.
-
-Also note that hmp_info_alarm_clock() performs error handling. That's not
-strictly required if you're sure the QMP function doesn't return errors, but
-it's good practice to always check for errors.
-
-Another important detail is that HMP's "info" commands don't go into the
-hmp-commands.hx. Instead, they go into the info_cmds[] table, which is defined
-in the monitor/misc.c file. The entry for the "info alarmclock" follows::
-
-    {
-        .name       = "alarmclock",
-        .args_type  = "",
-        .params     = "",
-        .help       = "show information about the alarm clock",
-        .cmd        = hmp_info_alarm_clock,
-    },
-
-To test this, run qemu and type "info alarmclock" in the user monitor.
-
-
-Returning Lists
-~~~~~~~~~~~~~~~
-
-For this example, we're going to return all available methods for the timer
-alarm, which is pretty much what the command-line option "-clock ?" does,
-except that we're also going to inform which method is in use.
-
-This first step is to define a new type::
-
- ##
- # @TimerAlarmMethod
- #
- # Timer alarm method information.
- #
- # @method-name: The method's name.
- #
- # @current: true if this alarm method is currently in use, false otherwise
- #
- # Since: 1.0
- ##
- { 'type': 'TimerAlarmMethod',
-   'data': { 'method-name': 'str', 'current': 'bool' } }
-
-The command will be called "query-alarm-methods", here is its schema
-specification::
-
- ##
- # @query-alarm-methods
- #
- # Returns information about available alarm methods.
- #
- # Returns: a list of @TimerAlarmMethod for each method
- #
- # Since: 1.0
- ##
- { 'command': 'query-alarm-methods', 'returns': ['TimerAlarmMethod'] }
-
-Notice the syntax for returning lists "'returns': ['TimerAlarmMethod']", this
-should be read as "returns a list of TimerAlarmMethod instances".
-
-The C implementation follows::
-
- TimerAlarmMethodList *qmp_query_alarm_methods(Error **errp)
- {
-     TimerAlarmMethodList *method_list = NULL;
-     const struct qemu_alarm_timer *p;
-     bool current = true;
-
-     for (p = alarm_timers; p->name; p++) {
-         TimerAlarmMethod *value = g_malloc0(*value);
-         value->method_name = g_strdup(p->name);
-         value->current = current;
-         QAPI_LIST_PREPEND(method_list, value);
-         current = false;
-     }
-
-     return method_list;
- }
-
-The most important difference from the previous examples is the
-TimerAlarmMethodList type, which is automatically generated by the QAPI from
-the TimerAlarmMethod type.
-
-Each list node is represented by a TimerAlarmMethodList instance. We have to
-allocate it, and that's done inside the for loop: the "info" pointer points to
-an allocated node. We also have to allocate the node's contents, which is
-stored in its "value" member. In our example, the "value" member is a pointer
-to an TimerAlarmMethod instance.
-
-Notice that the "current" variable is used as "true" only in the first
-iteration of the loop. That's because the alarm timer method in use is the
-first element of the alarm_timers array. Also notice that QAPI lists are handled
-by hand and we return the head of the list.
-
-Now Build qemu, run it as explained in the "Testing" section and try our new
-command::
-
- { "execute": "query-alarm-methods" }
- {
-     "return": [
-         {
-             "current": false,
-             "method-name": "unix"
-         },
-         {
-             "current": true,
-             "method-name": "dynticks"
+     for (tail = info_list; tail; tail = tail->next) {
+         info = tail->value;
+         monitor_printf(mon, "%s", info->filename);
+         if (info->has_bootindex) {
+             monitor_printf(mon, " %" PRId64, info->bootindex);
          }
-     ]
- }
-
-The HMP counterpart is a bit more complex than previous examples because it
-has to traverse the list, it's shown below for reference::
-
- void hmp_info_alarm_methods(Monitor *mon)
- {
-     TimerAlarmMethodList *method_list, *method;
-     Error *err = NULL;
-
-     method_list = qmp_query_alarm_methods(&err);
-     if (hmp_handle_error(mon, err)) {
-         return;
+         monitor_printf(mon, "\n");
      }
 
-     for (method = method_list; method; method = method->next) {
-         monitor_printf(mon, "%c %s\n", method->value->current ? '*' : ' ',
-                                        method->value->method_name);
-     }
-
-     qapi_free_TimerAlarmMethodList(method_list);
+     qapi_free_OptionRomInfoList(info_list);
  }
 
+It's important to notice that hmp_info_option_roms() calls
+qapi_free_OptionRomInfoList() to free the data returned by
+qmp_query_option_roms().  For user defined types, QAPI will generate a
+qapi_free_QAPI_TYPE_NAME() function, and that's what you have to use to
+free the types you define and qapi_free_QAPI_TYPE_NAMEList() for list
+types (explained in the next section). If the QMP function returns a
+string, then you should g_free() to free it.
+
+Also note that hmp_info_option_roms() performs error handling. That's
+not strictly required when you're sure the QMP function doesn't return
+errors; you could instead pass it &error_abort then.
+
+Another important detail is that HMP's "info" commands go into
+hmp-commands-info.hx, not hmp-commands.hx. The entry for the "info
+option-roms" follows::
+
+     {
+         .name       = "option-roms",
+         .args_type  = "",
+         .params     = "",
+         .help       = "show roms",
+         .cmd        = hmp_info_option_roms,
+     },
+ SRST
+ ``info option-roms``
+   Show the option ROMs.
+ ERST
+
+To test this, run QEMU and type "info option-roms" in the user monitor.
+
+
 Writing a debugging aid returning unstructured text
 ---------------------------------------------------
 
 As discussed in section `Modelling data in QAPI`_, it is required that
 commands expecting machine usage be using fine-grained QAPI data types.
 The exception to this rule applies when the command is solely intended
-as a debugging aid and allows for returning unstructured text. This is
-commonly needed for query commands that report aspects of QEMU's
-internal state that are useful to human operators.
+as a debugging aid and allows for returning unstructured text, such as
+a query command that report aspects of QEMU's internal state that are
+useful only to human operators.
 
-In this example we will consider a simplified variant of the HMP
-command ``info roms``. Following the earlier rules, this command will
-need to live under the ``x-`` name prefix, so its QMP implementation
-will be called ``x-query-roms``. It will have no parameters and will
-return a single text string::
-
- { 'struct': 'HumanReadableText',
-   'data': { 'human-readable-text': 'str' } }
+In this example we will consider the existing QMP command
+``x-query-roms`` in qapi/machine.json.  It has no parameters and
+returns a ``HumanReadableText``::
 
+ ##
+ # @x-query-roms:
+ #
+ # Query information on the registered ROMS
+ #
+ # Features:
+ #
+ # @unstable: This command is meant for debugging.
+ #
+ # Returns: registered ROMs
+ #
+ # Since: 6.2
+ ##
  { 'command': 'x-query-roms',
-   'returns': 'HumanReadableText' }
+   'returns': 'HumanReadableText',
+   'features': [ 'unstable' ] }
 
-The ``HumanReadableText`` struct is intended to be used for all
-commands, under the ``x-`` name prefix that are returning unstructured
-text targeted at humans. It should never be used for commands outside
-the ``x-`` name prefix, as those should be using structured QAPI types.
+The ``HumanReadableText`` struct is defined in qapi/common.json as a
+struct with a string member. It is intended to be used for all
+commands that are returning unstructured text targeted at
+humans. These should all have feature 'unstable'.  Note that the
+feature's documentation states why the command is unstable.  We
+commonly use a ``x-`` command name prefix to make lack of stability
+obvious to human users.
 
 Implementing the QMP command
 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 
 The QMP implementation will typically involve creating a ``GString``
-object and printing formatted data into it::
+object and printing formatted data into it, like this::
 
  HumanReadableText *qmp_x_query_roms(Error **errp)
  {
@@ -698,6 +593,9 @@ object and printing formatted data into it::
      return human_readable_text_from_str(buf);
  }
 
+The actual implementation emits more information.  You can find it in
+hw/core/loader.c.
+
 
 Implementing the HMP command
 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~
@@ -706,7 +604,7 @@ Now that the QMP command is in place, we can also make it available in
 the human monitor (HMP) as shown in previous examples. The HMP
 implementations will all look fairly similar, as all they need do is
 invoke the QMP command and then print the resulting text or error
-message. Here's the implementation of the "info roms" HMP command::
+message. Here's an implementation of the "info roms" HMP command::
 
  void hmp_info_roms(Monitor *mon, const QDict *qdict)
  {
@@ -746,3 +644,5 @@ field NULL::
         .help         = "show roms",
         .cmd_info_hrt = qmp_x_query_roms,
     },
+
+This is how the actual HMP command is done.
diff --git a/include/qapi/type-helpers.h b/include/qapi/type-helpers.h
index be1f181526..fc8352cdec 100644
--- a/include/qapi/type-helpers.h
+++ b/include/qapi/type-helpers.h
@@ -12,3 +12,11 @@
 #include "qapi/qapi-types-common.h"
 
 HumanReadableText *human_readable_text_from_str(GString *str);
+
+/*
+ * Produce and return a NULL-terminated array of strings from @list.
+ * The result is g_malloc()'d and all strings are g_strdup()'d.  It
+ * can be freed with g_strfreev(), or by g_auto(GStrv) automatic
+ * cleanup.
+ */
+char **strv_from_str_list(const strList *list);
diff --git a/include/qapi/util.h b/include/qapi/util.h
index 81a2b13a33..20dfea8a54 100644
--- a/include/qapi/util.h
+++ b/include/qapi/util.h
@@ -56,4 +56,17 @@ int parse_qapi_name(const char *name, bool complete);
     (tail) = &(*(tail))->next; \
 } while (0)
 
+/*
+ * For any GenericList @list, return its length.
+ */
+#define QAPI_LIST_LENGTH(list)                                      \
+    ({                                                              \
+        size_t _len = 0;                                            \
+        typeof(list) _tail;                                         \
+        for (_tail = list; _tail != NULL; _tail = _tail->next) {    \
+            _len++;                                                 \
+        }                                                           \
+        _len;                                                       \
+    })
+
 #endif
diff --git a/migration/exec.c b/migration/exec.c
index 47d2f3b8fb..20e6cccf8c 100644
--- a/migration/exec.c
+++ b/migration/exec.c
@@ -18,6 +18,7 @@
  */
 
 #include "qemu/osdep.h"
+#include "qapi/type-helpers.h"
 #include "qemu/error-report.h"
 #include "channel.h"
 #include "exec.h"
@@ -39,51 +40,16 @@ const char *exec_get_cmd_path(void)
 }
 #endif
 
-/* provides the length of strList */
-static int
-str_list_length(strList *list)
-{
-    int len = 0;
-    strList *elem;
-
-    for (elem = list; elem != NULL; elem = elem->next) {
-        len++;
-    }
-
-    return len;
-}
-
-static void
-init_exec_array(strList *command, char **argv, Error **errp)
-{
-    int i = 0;
-    strList *lst;
-
-    for (lst = command; lst; lst = lst->next) {
-        argv[i++] = lst->value;
-    }
-
-    argv[i] = NULL;
-    return;
-}
-
 void exec_start_outgoing_migration(MigrationState *s, strList *command,
                                    Error **errp)
 {
-    QIOChannel *ioc;
-
-    int length = str_list_length(command);
-    g_auto(GStrv) argv = (char **) g_new0(const char *, length + 1);
-
-    init_exec_array(command, argv, errp);
+    QIOChannel *ioc = NULL;
+    g_auto(GStrv) argv = strv_from_str_list(command);
+    const char * const *args = (const char * const *) argv;
     g_autofree char *new_command = g_strjoinv(" ", (char **)argv);
 
     trace_migration_exec_outgoing(new_command);
-    ioc = QIO_CHANNEL(
-        qio_channel_command_new_spawn(
-                            (const char * const *) g_steal_pointer(&argv),
-                            O_RDWR,
-                            errp));
+    ioc = QIO_CHANNEL(qio_channel_command_new_spawn(args, O_RDWR, errp));
     if (!ioc) {
         return;
     }
@@ -105,19 +71,12 @@ static gboolean exec_accept_incoming_migration(QIOChannel *ioc,
 void exec_start_incoming_migration(strList *command, Error **errp)
 {
     QIOChannel *ioc;
-
-    int length = str_list_length(command);
-    g_auto(GStrv) argv = (char **) g_new0(const char *, length + 1);
-
-    init_exec_array(command, argv, errp);
+    g_auto(GStrv) argv = strv_from_str_list(command);
+    const char * const *args = (const char * const *) argv;
     g_autofree char *new_command = g_strjoinv(" ", (char **)argv);
 
     trace_migration_exec_incoming(new_command);
-    ioc = QIO_CHANNEL(
-        qio_channel_command_new_spawn(
-                            (const char * const *) g_steal_pointer(&argv),
-                            O_RDWR,
-                            errp));
+    ioc = QIO_CHANNEL(qio_channel_command_new_spawn(args, O_RDWR, errp));
     if (!ioc) {
         return;
     }
diff --git a/qapi/block-core.json b/qapi/block-core.json
index 22b8634422..1874f880a8 100644
--- a/qapi/block-core.json
+++ b/qapi/block-core.json
@@ -1456,8 +1456,7 @@
 #
 # @size: new image size in bytes
 #
-# Returns:
-#     - nothing on success
+# Errors:
 #     - If @device is not a valid block device, DeviceNotFound
 #
 # Since: 0.14
@@ -1674,8 +1673,7 @@
 #
 # For the arguments, see the documentation of BlockdevSnapshotSync.
 #
-# Returns:
-#     - nothing on success
+# Errors:
 #     - If @device is not a valid block device, DeviceNotFound
 #
 # Since: 0.14
@@ -1754,8 +1752,7 @@
 #     is not validated, so care should be taken when specifying the
 #     string or the image chain may not be able to be reopened again.
 #
-# Returns:
-#     - Nothing on success
+# Errors:
 #     - If "device" does not exist or cannot be determined,
 #       DeviceNotFound
 #
@@ -1854,8 +1851,7 @@
 # @deprecated: Members @base and @top are deprecated.  Use @base-node
 #     and @top-node instead.
 #
-# Returns:
-#     - Nothing on success
+# Errors:
 #     - If @device does not exist, DeviceNotFound
 #     - Any other error returns a GenericError.
 #
@@ -1894,8 +1890,7 @@
 # @deprecated: This command is deprecated.  Use @blockdev-backup
 #     instead.
 #
-# Returns:
-#     - nothing on success
+# Errors:
 #     - If @device is not a valid block device, GenericError
 #
 # Since: 1.6
@@ -1921,8 +1916,7 @@
 # 'backup'. The operation can be stopped before it has completed using
 # the block-job-cancel command.
 #
-# Returns:
-#     - nothing on success
+# Errors:
 #     - If @device is not a valid block device, DeviceNotFound
 #
 # Since: 2.3
@@ -2127,8 +2121,7 @@
 # specifies the format of the mirror image, default is to probe if
 # mode='existing', else the format of the source.
 #
-# Returns:
-#     - nothing on success
+# Errors:
 #     - If @device is not a valid block device, GenericError
 #
 # Since: 1.3
@@ -2304,8 +2297,7 @@
 # Create a dirty bitmap with a name on the node, and start tracking
 # the writes.
 #
-# Returns:
-#     - nothing on success
+# Errors:
 #     - If @node is not a valid block device or node, DeviceNotFound
 #     - If @name is already taken, GenericError with an explanation
 #
@@ -2328,8 +2320,7 @@
 # with block-dirty-bitmap-add.  If the bitmap is persistent, remove it
 # from its storage too.
 #
-# Returns:
-#     - nothing on success
+# Errors:
 #     - If @node is not a valid block device or node, DeviceNotFound
 #     - If @name is not found, GenericError with an explanation
 #     - if @name is frozen by an operation, GenericError
@@ -2353,8 +2344,7 @@
 # backup from this point in time forward will only backup clusters
 # modified after this clear operation.
 #
-# Returns:
-#     - nothing on success
+# Errors:
 #     - If @node is not a valid block device, DeviceNotFound
 #     - If @name is not found, GenericError with an explanation
 #
@@ -2375,8 +2365,7 @@
 #
 # Enables a dirty bitmap so that it will begin tracking disk changes.
 #
-# Returns:
-#     - nothing on success
+# Errors:
 #     - If @node is not a valid block device, DeviceNotFound
 #     - If @name is not found, GenericError with an explanation
 #
@@ -2397,8 +2386,7 @@
 #
 # Disables a dirty bitmap so that it will stop tracking disk changes.
 #
-# Returns:
-#     - nothing on success
+# Errors:
 #     - If @node is not a valid block device, DeviceNotFound
 #     - If @name is not found, GenericError with an explanation
 #
@@ -2427,8 +2415,7 @@
 # dirty in any of the source bitmaps.  This can be used to achieve
 # backup checkpoints, or in simpler usages, to copy bitmaps.
 #
-# Returns:
-#     - nothing on success
+# Errors:
 #     - If @node is not a valid block device, DeviceNotFound
 #     - If any bitmap in @bitmaps or @target is not found,
 #       GenericError
@@ -2470,7 +2457,9 @@
 # @unstable: This command is meant for debugging.
 #
 # Returns:
-#     - BlockDirtyBitmapSha256 on success
+#     BlockDirtyBitmapSha256
+#
+# Errors:
 #     - If @node is not a valid block device, DeviceNotFound
 #     - If @name is not found or if hashing has failed, GenericError
 #       with an explanation
@@ -2542,8 +2531,6 @@
 #     disappear from the query list without user intervention.
 #     Defaults to true.  (Since 3.1)
 #
-# Returns: nothing on success.
-#
 # Since: 2.6
 #
 # Example:
@@ -2866,8 +2853,7 @@
 #     disappear from the query list without user intervention.
 #     Defaults to true.  (Since 3.1)
 #
-# Returns:
-#     - Nothing on success.
+# Errors:
 #     - If @device does not exist, DeviceNotFound.
 #
 # Since: 1.1
@@ -2905,8 +2891,7 @@
 # @speed: the maximum speed, in bytes per second, or 0 for unlimited.
 #     Defaults to 0.
 #
-# Returns:
-#     - Nothing on success
+# Errors:
 #     - If no background operation is active on this device,
 #       DeviceNotActive
 #
@@ -2950,8 +2935,7 @@
 #     paused) instead of waiting for the destination to complete its
 #     final synchronization (since 1.3)
 #
-# Returns:
-#     - Nothing on success
+# Errors:
 #     - If no background operation is active on this device,
 #       DeviceNotActive
 #
@@ -2977,8 +2961,7 @@
 #     the name of the parameter), but since QEMU 2.7 it can have other
 #     values.
 #
-# Returns:
-#     - Nothing on success
+# Errors:
 #     - If no background operation is active on this device,
 #       DeviceNotActive
 #
@@ -3002,8 +2985,7 @@
 #     the name of the parameter), but since QEMU 2.7 it can have other
 #     values.
 #
-# Returns:
-#     - Nothing on success
+# Errors:
 #     - If no background operation is active on this device,
 #       DeviceNotActive
 #
@@ -3034,8 +3016,7 @@
 #     the name of the parameter), but since QEMU 2.7 it can have other
 #     values.
 #
-# Returns:
-#     - Nothing on success
+# Errors:
 #     - If no background operation is active on this device,
 #       DeviceNotActive
 #
@@ -3059,8 +3040,6 @@
 #
 # @id: The job identifier.
 #
-# Returns: Nothing on success
-#
 # Since: 2.12
 ##
 { 'command': 'block-job-dismiss', 'data': { 'id': 'str' },
@@ -3078,8 +3057,6 @@
 #
 # @id: The job identifier.
 #
-# Returns: Nothing on success
-#
 # Since: 2.12
 ##
 { 'command': 'block-job-finalize', 'data': { 'id': 'str' },
@@ -6070,8 +6047,7 @@
 # For the arguments, see the documentation of
 # BlockdevSnapshotInternal.
 #
-# Returns:
-#     - nothing on success
+# Errors:
 #     - If @device is not a valid block device, GenericError
 #     - If any snapshot matching @name exists, or @name is empty,
 #       GenericError
@@ -6108,7 +6084,9 @@
 # @name: optional the snapshot's name to be deleted
 #
 # Returns:
-#     - SnapshotInfo on success
+#     SnapshotInfo
+#
+# Errors:
 #     - If @device is not a valid block device, GenericError
 #     - If snapshot not found, GenericError
 #     - If the format of the image used does not support it,
diff --git a/qapi/block-export.json b/qapi/block-export.json
index d9bd376b48..3919a2d5b9 100644
--- a/qapi/block-export.json
+++ b/qapi/block-export.json
@@ -65,7 +65,8 @@
 #     server from advertising multiple client support (since 5.2;
 #     default: 0).
 #
-# Returns: error if the server is already running.
+# Errors:
+#     - if the server is already running
 #
 # Since: 1.3
 ##
@@ -247,8 +248,9 @@
 # @deprecated: This command is deprecated.  Use @block-export-add
 #     instead.
 #
-# Returns: error if the server is not running, or export with the same
-#     name already exists.
+# Errors:
+#     - if the server is not running
+#     - if an export with the same name already exists
 #
 # Since: 1.3
 ##
@@ -294,11 +296,10 @@
 # @deprecated: This command is deprecated.  Use @block-export-del
 #     instead.
 #
-# Returns: error if
-#
-#     - the server is not running
-#     - export is not found
-#     - mode is 'safe' and there are existing connections
+# Errors:
+#     - if the server is not running
+#     - if export is not found
+#     - if mode is 'safe' and there are existing connections
 #
 # Since: 2.12
 ##
@@ -415,8 +416,10 @@
 # @mode: Mode of command operation.  See @BlockExportRemoveMode
 #     description.  Default is 'safe'.
 #
-# Returns: Error if the export is not found or @mode is 'safe' and the
-#     export is still in use (e.g. by existing client connections)
+# Errors:
+#     - if the export is not found
+#     - if @mode is 'safe' and the export is still in use (e.g. by
+#       existing client connections)
 #
 # Since: 5.2
 ##
diff --git a/qapi/block.json b/qapi/block.json
index 79a0bcc208..65d9804bdf 100644
--- a/qapi/block.json
+++ b/qapi/block.json
@@ -110,8 +110,7 @@
 #
 # @deprecated: Member @device is deprecated.  Use @id instead.
 #
-# Returns:
-#     - Nothing on success
+# Errors:
 #     - If @device is not a valid block device, DeviceNotFound
 #
 # Notes: Ejecting a device with no media results in success
@@ -459,8 +458,7 @@
 # the device will be removed from its group and the rest of its
 # members will not be affected.  The 'group' parameter is ignored.
 #
-# Returns:
-#     - Nothing on success
+# Errors:
 #     - If @device is not a valid block device, DeviceNotFound
 #
 # Since: 1.1
@@ -540,8 +538,8 @@
 # @boundaries-flush: list of interval boundary values for flush
 #     latency histogram.
 #
-# Returns: error if device is not found or any boundary arrays are
-#     invalid.
+# Errors:
+#     - if device is not found or any boundary arrays are invalid.
 #
 # Since: 4.0
 #
diff --git a/qapi/char.json b/qapi/char.json
index 4873bc635a..777dde55d9 100644
--- a/qapi/char.json
+++ b/qapi/char.json
@@ -139,8 +139,6 @@
 #     - data itself is always Unicode regardless of format, like any
 #       other string.
 #
-# Returns: Nothing on success
-#
 # Since: 1.4
 #
 # Example:
@@ -772,8 +770,6 @@
 #
 # @id: the chardev's ID, must exist and not be in use
 #
-# Returns: Nothing on success
-#
 # Since: 1.4
 #
 # Example:
@@ -791,8 +787,6 @@
 #
 # @id: the chardev's ID, must exist
 #
-# Returns: Nothing on success
-#
 # Since: 2.10
 #
 # Example:
diff --git a/qapi/dump.json b/qapi/dump.json
index f82dd6a1af..4c021dd53c 100644
--- a/qapi/dump.json
+++ b/qapi/dump.json
@@ -92,8 +92,6 @@
 #
 # Note: All boolean arguments default to false
 #
-# Returns: nothing on success
-#
 # Since: 1.2
 #
 # Example:
diff --git a/qapi/machine-target.json b/qapi/machine-target.json
index 2c5dda735e..519adf3220 100644
--- a/qapi/machine-target.json
+++ b/qapi/machine-target.json
@@ -154,10 +154,13 @@
 # Some architectures may not support comparing CPU models.  s390x
 # supports comparing CPU models.
 #
-# Returns: a CpuModelBaselineInfo.  Returns an error if comparing CPU
-#     models is not supported, if a model cannot be used, if a model
-#     contains an unknown cpu definition name, unknown properties or
-#     properties with wrong types.
+# Returns: a CpuModelBaselineInfo
+#
+# Errors:
+#     - if comparing CPU models is not supported
+#     - if a model cannot be used
+#     - if a model contains an unknown cpu definition name, unknown
+#       properties or properties with wrong types.
 #
 # Note: this command isn't specific to s390x, but is only implemented
 #     on this architecture currently.
@@ -201,10 +204,13 @@
 # Some architectures may not support baselining CPU models.  s390x
 # supports baselining CPU models.
 #
-# Returns: a CpuModelBaselineInfo.  Returns an error if baselining CPU
-#     models is not supported, if a model cannot be used, if a model
-#     contains an unknown cpu definition name, unknown properties or
-#     properties with wrong types.
+# Returns: a CpuModelBaselineInfo
+#
+# Errors:
+#     - if baselining CPU models is not supported
+#     - if a model cannot be used
+#     - if a model contains an unknown cpu definition name, unknown
+#       properties or properties with wrong types.
 #
 # Note: this command isn't specific to s390x, but is only implemented
 #     on this architecture currently.
@@ -263,11 +269,14 @@
 # Some architectures may not support all expansion types.  s390x
 # supports "full" and "static". Arm only supports "full".
 #
-# Returns: a CpuModelExpansionInfo.  Returns an error if expanding CPU
-#     models is not supported, if the model cannot be expanded, if the
-#     model contains an unknown CPU definition name, unknown
-#     properties or properties with a wrong type.  Also returns an
-#     error if an expansion type is not supported.
+# Returns: a CpuModelExpansionInfo
+#
+# Errors:
+#     - if expanding CPU models is not supported
+#     - if the model cannot be expanded
+#     - if the model contains an unknown CPU definition name, unknown
+#       properties or properties with a wrong type
+#     - if an expansion type is not supported
 #
 # Since: 2.8
 ##
@@ -405,8 +414,6 @@
 #
 # @unstable: This command is experimental.
 #
-# Returns: Nothing on success.
-#
 # Since: 8.2
 ##
 { 'command': 'set-cpu-topology',
diff --git a/qapi/machine.json b/qapi/machine.json
index 93b4677286..bb5a178909 100644
--- a/qapi/machine.json
+++ b/qapi/machine.json
@@ -326,8 +326,6 @@
 #
 # Since: 1.1
 #
-# Returns: nothing.
-#
 # Note: prior to 4.0, this command does nothing in case the guest
 #     isn't suspended.
 #
@@ -377,8 +375,6 @@
 # all CPUs (ppc64). The command fails when the guest doesn't support
 # injecting.
 #
-# Returns: If successful, nothing
-#
 # Since: 0.14
 #
 # Note: prior to 2.1, this command was only supported for x86 and s390
@@ -778,8 +774,6 @@
 # @cpu-index: the index of the virtual CPU to use for translating the
 #     virtual address (defaults to CPU 0)
 #
-# Returns: Nothing on success
-#
 # Since: 0.14
 #
 # Notes: Errors were not reliably returned until 1.1
@@ -806,8 +800,6 @@
 #
 # @filename: the file to save the memory to as binary data
 #
-# Returns: Nothing on success
-#
 # Since: 0.14
 #
 # Notes: Errors were not reliably returned until 1.1
@@ -1060,8 +1052,7 @@
 #
 #     From it we have: balloon_size = vm_ram_size - @value
 #
-# Returns:
-#     - Nothing on success
+# Errors:
 #     - If the balloon driver is enabled but not functional because
 #       the KVM kernel module cannot support it, KVMMissingCap
 #     - If no balloon device is present, DeviceNotActive
@@ -1099,7 +1090,9 @@
 # Return information about the balloon device.
 #
 # Returns:
-#     - @BalloonInfo on success
+#     @BalloonInfo
+#
+# Errors:
 #     - If the balloon driver is enabled but not functional because
 #       the KVM kernel module cannot support it, KVMMissingCap
 #     - If no balloon device is present, DeviceNotActive
@@ -1163,7 +1156,9 @@
 # message from the guest.
 #
 # Returns:
-#     - @HvBalloonInfo on success
+#     @HvBalloonInfo
+#
+# Errors:
 #     - If no hv-balloon device is present, guest memory status
 #       reporting is not enabled or no guest memory status report
 #       received yet, GenericError
diff --git a/qapi/migration.json b/qapi/migration.json
index 62acc834af..51d188b902 100644
--- a/qapi/migration.json
+++ b/qapi/migration.json
@@ -1572,8 +1572,6 @@
 #
 # Cancel the current executing migration process.
 #
-# Returns: nothing on success
-#
 # Notes: This command succeeds even if there is no migration process
 #     running.
 #
@@ -1593,8 +1591,6 @@
 #
 # @state: The state the migration is currently expected to be in
 #
-# Returns: nothing on success
-#
 # Since: 2.11
 #
 # Example:
@@ -1716,8 +1712,6 @@
 # @deprecated: Members @inc and @blk are deprecated.  Use
 #     blockdev-mirror with NBD instead.
 #
-# Returns: nothing on success
-#
 # Since: 0.14
 #
 # Notes:
@@ -1799,8 +1793,6 @@
 # @channels: list of migration stream channels with each stream in the
 #     list connected to a destination interface endpoint.
 #
-# Returns: nothing on success
-#
 # Since: 2.3
 #
 # Notes:
@@ -1868,8 +1860,6 @@
 # @live: Optional argument to ask QEMU to treat this command as part
 #     of a live migration.  Default to true.  (since 2.11)
 #
-# Returns: Nothing on success
-#
 # Since: 1.1
 #
 # Example:
@@ -1888,8 +1878,6 @@
 #
 # @enable: true to enable, false to disable.
 #
-# Returns: nothing
-#
 # Since: 1.3
 #
 # Example:
@@ -1932,8 +1920,6 @@
 # @failover: true to do failover, false to stop.  but cannot be
 #     specified if 'enable' is true.  default value is false.
 #
-# Returns: nothing.
-#
 # Example:
 #
 #     -> { "execute": "xen-set-replication",
@@ -1985,8 +1971,6 @@
 #
 # Xen uses this command to notify replication to trigger a checkpoint.
 #
-# Returns: nothing.
-#
 # Example:
 #
 #     -> { "execute": "xen-colo-do-checkpoint" }
@@ -2043,8 +2027,6 @@
 #
 # @uri: the URI to be used for the recovery of migration stream.
 #
-# Returns: nothing.
-#
 # Example:
 #
 #     -> { "execute": "migrate-recover",
@@ -2062,8 +2044,6 @@
 #
 # Pause a migration.  Currently it only supports postcopy.
 #
-# Returns: nothing.
-#
 # Example:
 #
 #     -> { "execute": "migrate-pause" }
@@ -2432,8 +2412,6 @@
 #
 # If @tag already exists, an error will be reported
 #
-# Returns: nothing
-#
 # Example:
 #
 #     -> { "execute": "snapshot-save",
@@ -2504,8 +2482,6 @@
 # device nodes that can have changed since the original @snapshot-save
 # command execution.
 #
-# Returns: nothing
-#
 # Example:
 #
 #     -> { "execute": "snapshot-load",
@@ -2567,8 +2543,6 @@
 # to determine completion and to fetch details of any errors that
 # arise.
 #
-# Returns: nothing
-#
 # Example:
 #
 #     -> { "execute": "snapshot-delete",
diff --git a/qapi/misc-target.json b/qapi/misc-target.json
index 542a3e42f2..4e0a6492a9 100644
--- a/qapi/misc-target.json
+++ b/qapi/misc-target.json
@@ -472,9 +472,6 @@
 #
 # @port: The port number
 #
-# Returns:
-#     - Nothing on success.
-#
 # Since: 8.0
 #
 # Example:
diff --git a/qapi/misc.json b/qapi/misc.json
index 11c55c2b6c..1b0c5dad88 100644
--- a/qapi/misc.json
+++ b/qapi/misc.json
@@ -28,8 +28,6 @@
 #
 # @tls: whether to perform TLS. Only applies to the "spice" protocol
 #
-# Returns: nothing on success.
-#
 # Since: 0.14
 #
 # Example:
@@ -160,8 +158,6 @@
 #
 # Since: 0.14
 #
-# Returns: If successful, nothing
-#
 # Notes: This command will succeed if the guest is currently running.
 #     It will also succeed if the guest is in the "inmigrate" state;
 #     in this case, the effect of the command is to make sure the
@@ -196,8 +192,6 @@
 #
 # Since: 3.0
 #
-# Returns: nothing
-#
 # Example:
 #
 #     -> { "execute": "x-exit-preconfig" }
@@ -256,8 +250,6 @@
 #
 # @fdname: file descriptor name
 #
-# Returns: Nothing on success
-#
 # Since: 0.14
 #
 # Notes: If @fdname already exists, the file descriptor assigned to it
@@ -285,8 +277,6 @@
 #
 # @fdname: file descriptor name
 #
-# Returns: Nothing on success
-#
 # Since: 8.0
 #
 # Notes: If @fdname already exists, the file descriptor assigned to it
@@ -309,8 +299,6 @@
 #
 # @fdname: file descriptor name
 #
-# Returns: Nothing on success
-#
 # Since: 0.14
 #
 # Example:
@@ -344,7 +332,9 @@
 # @opaque: A free-form string that can be used to describe the fd.
 #
 # Returns:
-#     - @AddfdInfo on success
+#     @AddfdInfo
+#
+# Errors:
 #     - If file descriptor was not received, GenericError
 #     - If @fdset-id is a negative value, GenericError
 #
@@ -374,8 +364,7 @@
 #
 # @fd: The file descriptor that is to be removed.
 #
-# Returns:
-#     - Nothing on success
+# Errors:
 #     - If @fdset-id or @fd is not found, GenericError
 #
 # Since: 1.2
@@ -528,8 +517,10 @@
 # @option: option name
 #
 # Returns: list of @CommandLineOptionInfo for all options (or for the
-#     given @option).  Returns an error if the given @option doesn't
-#     exist.
+#     given @option).
+#
+# Errors:
+#     - if the given @option doesn't exist
 #
 # Since: 1.5
 #
diff --git a/qapi/net.json b/qapi/net.json
index 1374caac64..417b61a321 100644
--- a/qapi/net.json
+++ b/qapi/net.json
@@ -17,8 +17,7 @@
 #
 # @up: true to set the link status to be up
 #
-# Returns:
-#     - Nothing on success
+# Errors:
 #     - If @name is not a valid network device, DeviceNotFound
 #
 # Since: 0.14
@@ -44,8 +43,7 @@
 #
 # Since: 0.14
 #
-# Returns:
-#     - Nothing on success
+# Errors:
 #     - If @type is not a valid network backend, DeviceNotFound
 #
 # Example:
@@ -65,8 +63,7 @@
 #
 # @id: the name of the network backend to remove
 #
-# Returns:
-#     - Nothing on success
+# Errors:
 #     - If @id is not a valid network backend, DeviceNotFound
 #
 # Since: 0.14
@@ -828,9 +825,11 @@
 # @name: net client name
 #
 # Returns: list of @RxFilterInfo for all NICs (or for the given NIC).
-#     Returns an error if the given @name doesn't exist, or given NIC
-#     doesn't support rx-filter querying, or given net client isn't a
-#     NIC.
+#
+# Errors:
+#     - if the given @name doesn't exist
+#     - if the given NIC doesn't support rx-filter querying
+#     - if the given net client isn't a NIC
 #
 # Since: 1.6
 #
diff --git a/qapi/qapi-type-helpers.c b/qapi/qapi-type-helpers.c
index f76b34f647..266da013ad 100644
--- a/qapi/qapi-type-helpers.c
+++ b/qapi/qapi-type-helpers.c
@@ -21,3 +21,17 @@ HumanReadableText *human_readable_text_from_str(GString *str)
 
     return ret;
 }
+
+char **strv_from_str_list(const strList *list)
+{
+    const strList *tail;
+    int i = 0;
+    char **strv = g_new(char *, QAPI_LIST_LENGTH(list) + 1);
+
+    for (tail = list; tail != NULL; tail = tail->next) {
+        strv[i++] = g_strdup(tail->value);
+    }
+    strv[i] = NULL;
+
+    return strv;
+}
diff --git a/qapi/qdev.json b/qapi/qdev.json
index 32ffaee644..facaa0bc6a 100644
--- a/qapi/qdev.json
+++ b/qapi/qdev.json
@@ -89,8 +89,7 @@
 #
 # @id: the device's ID or QOM path
 #
-# Returns:
-#     - Nothing on success
+# Errors:
 #     - If @id is not a valid device, DeviceNotFound
 #
 # Notes: When this command completes, the device may not be removed
diff --git a/qapi/qom.json b/qapi/qom.json
index 2a6e49365a..032c6fa037 100644
--- a/qapi/qom.json
+++ b/qapi/qom.json
@@ -1056,8 +1056,7 @@
 #
 # Create a QOM object.
 #
-# Returns:
-#     - Nothing on success
+# Errors:
 #     - Error if @qom-type is not a valid class name
 #
 # Since: 2.0
@@ -1079,8 +1078,7 @@
 #
 # @id: the name of the QOM object to remove
 #
-# Returns:
-#     - Nothing on success
+# Errors:
 #     - Error if @id is not a valid id for a QOM object
 #
 # Since: 2.0
diff --git a/qapi/run-state.json b/qapi/run-state.json
index dd0770b379..789fc34559 100644
--- a/qapi/run-state.json
+++ b/qapi/run-state.json
@@ -395,10 +395,7 @@
 #
 # @panic: @PanicAction action taken on guest panic.
 #
-# @watchdog: @WatchdogAction action taken when watchdog timer expires
-#     .
-#
-# Returns: Nothing on success.
+# @watchdog: @WatchdogAction action taken when watchdog timer expires.
 #
 # Since: 6.0
 #
diff --git a/qapi/tpm.json b/qapi/tpm.json
index 07a73e5f2b..1577b5c259 100644
--- a/qapi/tpm.json
+++ b/qapi/tpm.json
@@ -166,8 +166,6 @@
 #
 # Return information about the TPM device
 #
-# Returns: @TPMInfo on success
-#
 # Since: 1.5
 #
 # Example:
diff --git a/qapi/transaction.json b/qapi/transaction.json
index 45233ddd2a..5749c133d4 100644
--- a/qapi/transaction.json
+++ b/qapi/transaction.json
@@ -234,9 +234,8 @@
 #     execution of the transaction.  See @TransactionProperties for
 #     additional detail.
 #
-# Returns: nothing on success
-#
-#     Errors depend on the operations of the transaction
+# Errors:
+#     Any errors from commands in the transaction
 #
 # Note: The transaction aborts on the first failure.  Therefore, there
 #     will be information on only one failed operation returned in an
diff --git a/qapi/ui.json b/qapi/ui.json
index e3999b7c07..1726f15429 100644
--- a/qapi/ui.json
+++ b/qapi/ui.json
@@ -78,8 +78,7 @@
 #
 # Set the password of a remote display server.
 #
-# Returns:
-#     - Nothing on success
+# Errors:
 #     - If Spice is not enabled, DeviceNotFound
 #
 # Since: 0.14
@@ -140,8 +139,7 @@
 #
 # Expire the password of a remote display server.
 #
-# Returns:
-#     - Nothing on success
+# Errors:
 #     - If @protocol is 'spice' and Spice is not active,
 #       DeviceNotFound
 #
@@ -187,8 +185,6 @@
 #
 # @format: image format for screendump.  (default: ppm) (Since 7.1)
 #
-# Returns: Nothing on success
-#
 # Since: 0.14
 #
 # Example:
@@ -1036,8 +1032,7 @@
 # @hold-time: time to delay key up events, milliseconds.  Defaults to
 #     100
 #
-# Returns:
-#     - Nothing on success
+# Errors:
 #     - If key is unknown or redundant, GenericError
 #
 # Since: 1.3
@@ -1259,8 +1254,6 @@
 #
 # @events: List of InputEvent union.
 #
-# Returns: Nothing on success.
-#
 # Since: 2.6
 #
 # Note: The consoles are visible in the qom tree, under
@@ -1605,8 +1598,6 @@
 #
 # Reload display configuration.
 #
-# Returns: Nothing on success.
-#
 # Since: 6.0
 #
 # Example:
@@ -1664,8 +1655,6 @@
 #
 # Update display configuration.
 #
-# Returns: Nothing on success.
-#
 # Since: 7.1
 #
 # Example:
diff --git a/qapi/yank.json b/qapi/yank.json
index b7aeb9ceef..89f2f4d199 100644
--- a/qapi/yank.json
+++ b/qapi/yank.json
@@ -78,9 +78,8 @@
 #
 # @instances: the instances to be yanked
 #
-# Returns:
-#     - Nothing on success
-#     - @DeviceNotFound error, if any of the YankInstances doesn't exist
+# Errors:
+#     - If any of the YankInstances doesn't exist, DeviceNotFound
 #
 # Example:
 #
diff --git a/qga/qapi-schema.json b/qga/qapi-schema.json
index b8efe31897..9554b566a7 100644
--- a/qga/qapi-schema.json
+++ b/qga/qapi-schema.json
@@ -153,8 +153,6 @@
 # @time: time of nanoseconds, relative to the Epoch of 1970-01-01 in
 #     UTC.
 #
-# Returns: Nothing on success.
-#
 # Since: 1.5
 ##
 { 'command': 'guest-set-time',
@@ -230,7 +228,7 @@
 #
 # @mode: open mode, as per fopen(), "r" is the default.
 #
-# Returns: Guest file handle on success.
+# Returns: Guest file handle
 #
 # Since: 0.15.0
 ##
@@ -245,8 +243,6 @@
 #
 # @handle: filehandle returned by guest-file-open
 #
-# Returns: Nothing on success.
-#
 # Since: 0.15.0
 ##
 { 'command': 'guest-file-close',
@@ -281,7 +277,7 @@
 # @count: maximum number of bytes to read (default is 4KB, maximum is
 #     48MB)
 #
-# Returns: @GuestFileRead on success.
+# Returns: @GuestFileRead
 #
 # Since: 0.15.0
 ##
@@ -316,7 +312,7 @@
 # @count: bytes to write (actual bytes, after base64-decode), default
 #     is all content in buf-b64 buffer after base64 decoding
 #
-# Returns: @GuestFileWrite on success.
+# Returns: @GuestFileWrite
 #
 # Since: 0.15.0
 ##
@@ -383,7 +379,7 @@
 #
 # @whence: Symbolic or numeric code for interpreting offset
 #
-# Returns: @GuestFileSeek on success.
+# Returns: @GuestFileSeek
 #
 # Since: 0.15.0
 ##
@@ -399,8 +395,6 @@
 #
 # @handle: filehandle returned by guest-file-open
 #
-# Returns: Nothing on success.
-#
 # Since: 0.15.0
 ##
 { 'command': 'guest-file-flush',
@@ -443,15 +437,16 @@
 # command succeeded, you may call @guest-fsfreeze-thaw later to
 # unfreeze.
 #
+# On error, all filesystems will be thawed.  If no filesystems are
+# frozen as a result of this call, then @guest-fsfreeze-status will
+# remain "thawed" and calling @guest-fsfreeze-thaw is not necessary.
+#
+# Returns: Number of file systems currently frozen.
+#
 # Note: On Windows, the command is implemented with the help of a
 #     Volume Shadow-copy Service DLL helper.  The frozen state is
 #     limited for up to 10 seconds by VSS.
 #
-# Returns: Number of file systems currently frozen.  On error, all
-#     filesystems will be thawed.  If no filesystems are frozen as a
-#     result of this call, then @guest-fsfreeze-status will remain
-#     "thawed" and calling @guest-fsfreeze-thaw is not necessary.
-#
 # Since: 0.15.0
 ##
 { 'command': 'guest-fsfreeze-freeze',
@@ -463,12 +458,13 @@
 # Sync and freeze specified guest filesystems.  See also
 # @guest-fsfreeze-freeze.
 #
+# On error, all filesystems will be thawed.
+#
 # @mountpoints: an array of mountpoints of filesystems to be frozen.
 #     If omitted, every mounted filesystem is frozen.  Invalid mount
 #     points are ignored.
 #
-# Returns: Number of file systems currently frozen.  On error, all
-#     filesystems will be thawed.
+# Returns: Number of file systems currently frozen.
 #
 # Since: 2.2
 ##
@@ -561,9 +557,8 @@
 # could also exit (or set its status to "shutdown") due to other
 # reasons.
 #
-# The following errors may be returned:
-#
-# - If suspend to disk is not supported, Unsupported
+# Errors:
+#     - If suspend to disk is not supported, Unsupported
 #
 # Notes: It's strongly recommended to issue the guest-sync command
 #     before sending commands when the guest resumes
@@ -598,9 +593,8 @@
 # 2. Issue the query-status QMP command to confirm the VM status is
 #    "suspended"
 #
-# The following errors may be returned:
-#
-# - If suspend to ram is not supported, Unsupported
+# Errors:
+#     - If suspend to ram is not supported, Unsupported
 #
 # Notes: It's strongly recommended to issue the guest-sync command
 #     before sending commands when the guest resumes
@@ -634,9 +628,8 @@
 # 2. Issue the query-status QMP command to confirm the VM status is
 #    "suspended"
 #
-# The following errors may be returned:
-#
-# - If hybrid suspend is not supported, Unsupported
+# Errors:
+#     - If hybrid suspend is not supported, Unsupported
 #
 # Notes: It's strongly recommended to issue the guest-sync command
 #     before sending commands when the guest resumes
@@ -732,7 +725,7 @@
 #
 # Get list of guest IP addresses, MAC addresses and netmasks.
 #
-# Returns: List of GuestNetworkInterface on success.
+# Returns: List of GuestNetworkInterface
 #
 # Since: 1.1
 ##
@@ -796,9 +789,6 @@
 #     - 0:
 #       if the @vcpus list was empty on input.  Guest state has not
 #       been changed.  Otherwise,
-#     - Error:
-#       processing the first node of @vcpus failed for the reason
-#       returned.  Guest state has not been changed.  Otherwise,
 #     - < length(@vcpus):
 #       more than zero initial nodes have been processed, but not the
 #       entire @vcpus list.  Guest state has changed accordingly.  To
@@ -808,6 +798,10 @@
 #     - length(@vcpus):
 #       call successful.
 #
+# Errors:
+#     - If the reconfiguration of the first node in @vcpus failed.
+#       Guest state has not been changed.
+#
 # Since: 1.5
 ##
 { 'command': 'guest-set-vcpus',
@@ -1079,8 +1073,6 @@
 # transmission, even if already crypt()d, to ensure it is 8-bit safe
 # when passed as JSON.
 #
-# Returns: Nothing on success.
-#
 # Since: 2.3
 ##
 { 'command': 'guest-set-user-password',
@@ -1184,9 +1176,9 @@
 #     @GuestMemoryBlockResponse, which is corresponding to the input
 #     list.
 #
-#     Note: it will return NULL if the @mem-blks list was empty on
-#     input, or there is an error, and in this case, guest state will
-#     not be changed.
+#     Note: it will return an empty list if the @mem-blks list was
+#     empty on input, or there is an error, and in this case, guest
+#     state will not be changed.
 #
 # Since: 2.3
 ##
@@ -1257,7 +1249,7 @@
 #
 # @pid: pid returned from guest-exec
 #
-# Returns: GuestExecStatus on success.
+# Returns: GuestExecStatus
 #
 # Since: 2.5
 ##
@@ -1325,7 +1317,7 @@
 # @capture-output: bool flag to enable capture of stdout/stderr of
 #     running process.  defaults to false.
 #
-# Returns: PID on success.
+# Returns: PID
 #
 # Since: 2.5
 ##
@@ -1354,7 +1346,7 @@
 # or even present in DNS or some other name service at all.  It need
 # not even be unique on your local network or site, but usually it is.
 #
-# Returns: the host name of the machine on success
+# Returns: the host name of the machine
 #
 # Since: 2.10
 ##
@@ -1604,8 +1596,6 @@
 #
 # @reset: ignore the existing content, set it with the given keys only
 #
-# Returns: Nothing on success.
-#
 # Since: 5.2
 ##
 { 'command': 'guest-ssh-add-authorized-keys',
@@ -1624,8 +1614,6 @@
 # @keys: the public keys to remove (in OpenSSH/sshd(8) authorized_keys
 #     format)
 #
-# Returns: Nothing on success.
-#
 # Since: 5.2
 ##
 { 'command': 'guest-ssh-remove-authorized-keys',
diff --git a/scripts/qapi/parser.py b/scripts/qapi/parser.py
index 11707418fb..d8f76060b8 100644
--- a/scripts/qapi/parser.py
+++ b/scripts/qapi/parser.py
@@ -543,7 +543,7 @@ class QAPISchemaParser:
                         line = self.get_doc_indented(doc)
                     no_more_args = True
                 elif match := re.match(
-                        r'(Returns|Since|Notes?|Examples?|TODO): *',
+                        r'(Returns|Errors|Since|Notes?|Examples?|TODO): *',
                         line):
                     # tagged section
                     doc.new_tagged_section(self.info, match.group(1))
@@ -639,6 +639,11 @@ class QAPIDoc:
         # dicts mapping parameter/feature names to their description
         self.args: Dict[str, QAPIDoc.ArgSection] = {}
         self.features: Dict[str, QAPIDoc.ArgSection] = {}
+        # a command's "Returns" and "Errors" section
+        self.returns: Optional[QAPIDoc.Section] = None
+        self.errors: Optional[QAPIDoc.Section] = None
+        # "Since" section
+        self.since: Optional[QAPIDoc.Section] = None
         # sections other than .body, .args, .features
         self.sections: List[QAPIDoc.Section] = []
 
@@ -660,14 +665,22 @@ class QAPIDoc:
         self.all_sections.append(section)
 
     def new_tagged_section(self, info: QAPISourceInfo, tag: str) -> None:
-        if tag in ('Returns', 'Since'):
-            for section in self.all_sections:
-                if isinstance(section, self.ArgSection):
-                    continue
-                if section.tag == tag:
-                    raise QAPISemError(
-                        info, "duplicated '%s' section" % tag)
         section = self.Section(info, tag)
+        if tag == 'Returns':
+            if self.returns:
+                raise QAPISemError(
+                    info, "duplicated '%s' section" % tag)
+            self.returns = section
+        elif tag == 'Errors':
+            if self.errors:
+                raise QAPISemError(
+                    info, "duplicated '%s' section" % tag)
+            self.errors = section
+        elif tag == 'Since':
+            if self.since:
+                raise QAPISemError(
+                    info, "duplicated '%s' section" % tag)
+            self.since = section
         self.sections.append(section)
         self.all_sections.append(section)
 
@@ -708,13 +721,20 @@ class QAPIDoc:
         self.features[feature.name].connect(feature)
 
     def check_expr(self, expr: QAPIExpression) -> None:
-        if 'command' not in expr:
-            sec = next((sec for sec in self.sections
-                        if sec.tag == 'Returns'),
-                       None)
-            if sec:
-                raise QAPISemError(sec.info,
-                                   "'Returns:' is only valid for commands")
+        if 'command' in expr:
+            if self.returns and 'returns' not in expr:
+                raise QAPISemError(
+                    self.returns.info,
+                    "'Returns' section, but command doesn't return anything")
+        else:
+            if self.returns:
+                raise QAPISemError(
+                    self.returns.info,
+                    "'Returns' section is only valid for commands")
+            if self.errors:
+                raise QAPISemError(
+                    self.returns.info,
+                    "'Errors' section is only valid for commands")
 
     def check(self) -> None:
 
diff --git a/tests/qapi-schema/doc-good.json b/tests/qapi-schema/doc-good.json
index 5bb2b69071..de38a386e8 100644
--- a/tests/qapi-schema/doc-good.json
+++ b/tests/qapi-schema/doc-good.json
@@ -159,6 +159,8 @@
 #
 # Returns: @Object
 #
+# Errors: some
+#
 # TODO: frobnicate
 #
 # Notes:
diff --git a/tests/qapi-schema/doc-good.out b/tests/qapi-schema/doc-good.out
index 34ee74af4b..716a9a4102 100644
--- a/tests/qapi-schema/doc-good.out
+++ b/tests/qapi-schema/doc-good.out
@@ -173,6 +173,8 @@ another feature
 @arg3 is undocumented
     section=Returns
 @Object
+    section=Errors
+some
     section=TODO
 frobnicate
     section=Notes
diff --git a/tests/qapi-schema/doc-good.txt b/tests/qapi-schema/doc-good.txt
index 879f6ff50a..847db70412 100644
--- a/tests/qapi-schema/doc-good.txt
+++ b/tests/qapi-schema/doc-good.txt
@@ -206,6 +206,12 @@ Returns
 "Object"
 
 
+Errors
+~~~~~~
+
+some
+
+
 Notes
 ~~~~~
 
diff --git a/tests/qapi-schema/doc-invalid-return.err b/tests/qapi-schema/doc-invalid-return.err
index 3d9e71c2b3..aafd57b135 100644
--- a/tests/qapi-schema/doc-invalid-return.err
+++ b/tests/qapi-schema/doc-invalid-return.err
@@ -1 +1 @@
-doc-invalid-return.json:6: 'Returns:' is only valid for commands
+doc-invalid-return.json:6: 'Returns' section is only valid for commands
diff --git a/tests/qapi-schema/doc-invalid-return2.err b/tests/qapi-schema/doc-invalid-return2.err
new file mode 100644
index 0000000000..c3d0c7a452
--- /dev/null
+++ b/tests/qapi-schema/doc-invalid-return2.err
@@ -0,0 +1 @@
+doc-invalid-return2.json:5: 'Returns' section, but command doesn't return anything
diff --git a/tests/qapi-schema/doc-invalid-return2.json b/tests/qapi-schema/doc-invalid-return2.json
new file mode 100644
index 0000000000..37883d4fea
--- /dev/null
+++ b/tests/qapi-schema/doc-invalid-return2.json
@@ -0,0 +1,7 @@
+# Command doesn't return anything
+
+##
+# @foo:
+# Returns: blah
+##
+{ 'command': 'foo' }
diff --git a/tests/qapi-schema/doc-invalid-return2.out b/tests/qapi-schema/doc-invalid-return2.out
new file mode 100644
index 0000000000..e69de29bb2
diff --git a/tests/qapi-schema/meson.build b/tests/qapi-schema/meson.build
index 4b8329d070..0f479d9317 100644
--- a/tests/qapi-schema/meson.build
+++ b/tests/qapi-schema/meson.build
@@ -79,6 +79,7 @@ schemas = [
   'doc-invalid-end.json',
   'doc-invalid-end2.json',
   'doc-invalid-return.json',
+  'doc-invalid-return2.json',
   'doc-invalid-section.json',
   'doc-invalid-start.json',
   'doc-missing-colon.json',