From 806be3734c3c55357f15ab6548df86433f81859f Mon Sep 17 00:00:00 2001 From: Like Xu Date: Wed, 20 Feb 2019 13:27:26 +0800 Subject: [PATCH] doc: fix typos for documents in tree Signed-off-by: Like Xu Reviewed-by: Eric Blake Message-Id: <1550640446-18788-1-git-send-email-like.xu@linux.intel.com> Signed-off-by: Laurent Vivier --- docs/COLO-FT.txt | 2 +- docs/amd-memory-encryption.txt | 2 +- docs/can.txt | 2 +- docs/colo-proxy.txt | 6 +++--- docs/cpu-hotplug.rst | 2 +- docs/qcow2-cache.txt | 2 +- docs/qemu-block-drivers.texi | 2 +- docs/qemu-cpu-models.texi | 8 ++++---- docs/rdma.txt | 4 ++-- docs/replay.txt | 2 +- docs/vfio-ap.txt | 2 +- 11 files changed, 17 insertions(+), 17 deletions(-) diff --git a/docs/COLO-FT.txt b/docs/COLO-FT.txt index e2686bb338..ad24680d13 100644 --- a/docs/COLO-FT.txt +++ b/docs/COLO-FT.txt @@ -102,7 +102,7 @@ to make sure the state of VM in Secondary side is always consistent with VM in Primary side. COLO Proxy: -Delivers packets to Primary and Seconday, and then compare the responses from +Delivers packets to Primary and Secondary, and then compare the responses from both side. Then decide whether to start a checkpoint according to some rules. Please refer to docs/colo-proxy.txt for more information. diff --git a/docs/amd-memory-encryption.txt b/docs/amd-memory-encryption.txt index f483795eaa..43bf3ee6a5 100644 --- a/docs/amd-memory-encryption.txt +++ b/docs/amd-memory-encryption.txt @@ -97,7 +97,7 @@ References AMD Memory Encryption whitepaper: http://amd-dev.wpengine.netdna-cdn.com/wordpress/media/2013/12/AMD_Memory_Encryption_Whitepaper_v7-Public.pdf -Secure Encrypted Virutualization Key Management: +Secure Encrypted Virtualization Key Management: [1] http://support.amd.com/TechDocs/55766_SEV-KM API_Specification.pdf KVM Forum slides: diff --git a/docs/can.txt b/docs/can.txt index 7ba23b259a..9fa6ed51c8 100644 --- a/docs/can.txt +++ b/docs/can.txt @@ -99,7 +99,7 @@ Links to other resources https://gitlab.fel.cvut.cz/canbus/qemu-canbus (3) RTEMS page describing project https://devel.rtems.org/wiki/Developer/Simulators/QEMU/CANEmulation - (4) RTLWS 2015 article about the projevt and its use with CANopen emulation + (4) RTLWS 2015 article about the project and its use with CANopen emulation http://rtime.felk.cvut.cz/publications/public/rtlws2015-qemu-can.pdf Slides http://rtime.felk.cvut.cz/publications/public/rtlws2015-qemu-can-slides.pdf diff --git a/docs/colo-proxy.txt b/docs/colo-proxy.txt index 1f8e4b4e77..fa1cef0278 100644 --- a/docs/colo-proxy.txt +++ b/docs/colo-proxy.txt @@ -41,7 +41,7 @@ Below is a COLO proxy ascii figure: | | +------------------------------------------------------+ | | | | |netfilter| | | | | | netfilter | | | | +----------+ +----------------------------+ | | | +-----------------------------------------------------------+ | -| | | | | | out | | | | | | filter excute order | | +| | | | | | out | | | | | | filter execute order | | | | | | +-----------------------------+ | | | | | | +-------------------> | | | | | | | | | | | | | | | | TCP | | | | +-----+--+-+ +-----v----+ +-----v----+ |pri +----+----+sec| | | | +------------+ +---+----+---v+rewriter++ +------------+ | | @@ -53,7 +53,7 @@ Below is a COLO proxy ascii figure: | | | tx | rx rx | | | | | tx all | rx | | | | | | | | | | +-----------------------------------------------------------+ | | | | +--------------+ | | | | | | -| | | filter excute order | | | | | | | +| | | filter execute order | | | | | | | | | | +----------------> | | | +--------------------------------------------------------+ | | +-----------------------------------------+ | | | | | | | | | @@ -92,7 +92,7 @@ but do nothing, just pass to next filter. Redirect Server Filter --> COLO-Compare COLO-compare receive primary guest packet then -waiting scondary redirect packet to compare it. +waiting secondary redirect packet to compare it. If packet same,send queued primary packet and clear queued secondary packet, Otherwise send primary packet and do checkpoint. diff --git a/docs/cpu-hotplug.rst b/docs/cpu-hotplug.rst index 1c268e00b4..cfeb79f571 100644 --- a/docs/cpu-hotplug.rst +++ b/docs/cpu-hotplug.rst @@ -137,6 +137,6 @@ From the 'qmp-shell', invoke the QMP ``device_del`` command:: vCPU hot-unplug requires guest cooperation; so the ``device_del`` command above does not guarantee vCPU removal -- it's a "request to unplug". At this point, the guest will get a System Control - Interupt (SCI) and calls the ACPI handler for the affected vCPU + Interrupt (SCI) and calls the ACPI handler for the affected vCPU device. Then the guest kernel will bring the vCPU offline and tell QEMU to unplug it. diff --git a/docs/qcow2-cache.txt b/docs/qcow2-cache.txt index c459bf5dd3..c1e7751fea 100644 --- a/docs/qcow2-cache.txt +++ b/docs/qcow2-cache.txt @@ -55,7 +55,7 @@ value can improve the I/O performance significantly. The refcount blocks ------------------- -The qcow2 format also mantains a reference count for each cluster. +The qcow2 format also maintains a reference count for each cluster. Reference counts are used for cluster allocation and internal snapshots. The data is stored in a two-level structure similar to the L1/L2 tables described above. diff --git a/docs/qemu-block-drivers.texi b/docs/qemu-block-drivers.texi index 38e9f34cc9..da06a9bc83 100644 --- a/docs/qemu-block-drivers.texi +++ b/docs/qemu-block-drivers.texi @@ -632,7 +632,7 @@ qemu-system-i386 -drive file=iscsi://127.0.0.1/iqn.qemu.test/1 \ @end example -Howto set up a simple iSCSI target on loopback and accessing it via QEMU: +How to set up a simple iSCSI target on loopback and access it via QEMU: @example This example shows how to set up an iSCSI target with one CDROM and one DISK using the Linux STGT software target. This target is available on Red Hat based diff --git a/docs/qemu-cpu-models.texi b/docs/qemu-cpu-models.texi index 475d434d52..1b72584161 100644 --- a/docs/qemu-cpu-models.texi +++ b/docs/qemu-cpu-models.texi @@ -49,7 +49,7 @@ live migration safe. The information that follows provides recommendations for configuring CPU models on x86 hosts. The goals are to maximise performance, while protecting guest OS against various CPU hardware flaws, and optionally -enabling live migration between hosts with hetergeneous CPU models. +enabling live migration between hosts with heterogeneous CPU models. @menu * preferred_cpu_models_intel_x86:: Preferred CPU models for Intel x86 hosts @@ -287,7 +287,7 @@ Must be explicitly turned on for all AMD CPU models. This provides higher performance than virt-ssbd so should be exposed to guests whenever available in the host. virt-ssbd should none the less also be exposed for maximum guest -compatability as some kernels only know about virt-ssbd. +compatibility as some kernels only know about virt-ssbd. @item @code{amd-no-ssb} @@ -296,7 +296,7 @@ Recommended to indicate the host is not vulnerable CVE-2018-3639 Not included by default in any AMD CPU model. -Future hardware genarations of CPU will not be vulnerable to +Future hardware generations of CPU will not be vulnerable to CVE-2018-3639, and thus the guest should be told not to enable its mitigations, by exposing amd-no-ssb. This is mutually exclusive with virt-ssbd and amd-ssbd. @@ -451,7 +451,7 @@ MIPS64 Processor (Release 6, 2014) @item @code{Loongson-2F} -MIPS64 Processor (Longsoon 2, 2008) +MIPS64 Processor (Loongson 2, 2008) @item @code{Loongson-2E} diff --git a/docs/rdma.txt b/docs/rdma.txt index e6f9902617..a86e992c84 100644 --- a/docs/rdma.txt +++ b/docs/rdma.txt @@ -30,7 +30,7 @@ of the significantly lower latency and higher throughput over TCP/IP. This is because the RDMA I/O architecture reduces the number of interrupts and data copies by bypassing the host networking stack. In particular, a TCP-based migration, under certain types of memory-bound workloads, may take a more -unpredicatable amount of time to complete the migration if the amount of +unpredictable amount of time to complete the migration if the amount of memory tracked during each live migration iteration round cannot keep pace with the rate of dirty memory produced by the workload. @@ -408,7 +408,7 @@ socket is broken during a non-RDMA based migration. TODO: ===== 1. Currently, 'ulimit -l' mlock() limits as well as cgroups swap limits - are not compatible with infinband memory pinning and will result in + are not compatible with infiniband memory pinning and will result in an aborted migration (but with the source VM left unaffected). 2. Use of the recent /proc//pagemap would likely speed up the use of KSM and ballooning while using RDMA. diff --git a/docs/replay.txt b/docs/replay.txt index 3497585f5a..ee6aee9861 100644 --- a/docs/replay.txt +++ b/docs/replay.txt @@ -290,7 +290,7 @@ E.g., '-serial stdio' in record mode, and '-serial null' in replay mode. Replay log format ----------------- -Record/replay log consits of the header and the sequence of execution +Record/replay log consists of the header and the sequence of execution events. The header includes 4-byte replay version id and 8-byte reserved field. Version is updated every time replay log format changes to prevent using replay log created by another build of qemu. diff --git a/docs/vfio-ap.txt b/docs/vfio-ap.txt index 8cd060a01e..b1eb2deeaf 100644 --- a/docs/vfio-ap.txt +++ b/docs/vfio-ap.txt @@ -671,7 +671,7 @@ These are the steps: -> IOMMU Hardware Support select S390 AP IOMMU Support -> VFIO Non-Privileged userspace driver framework - -> Mediated device driver frramework + -> Mediated device driver framework -> VFIO driver for Mediated devices -> I/O subsystem -> VFIO support for AP devices