OpenE2K
/
qemu-e2k
13
4
Fork 0
Code Issues 4 Pull Requests Projects 2 Releases Activity

smbus: do not immediately complete commands 

PIIX4 errata says that "immediate polling of the Host Status Register BUSY
bit may indicate that the SMBus is NOT busy."
Due to this, some code does the following steps:
(a) set parameters
(b) start command
(c) check for smbus busy bit set (to know that command started)
(d) check for smbus busy bit not set (to know that command finished)

Let (c) happen, by immediately setting the busy bit, and really executing
the command when status register has been read once.

This fixes a problem with AMIBIOS, which can now properly initialize the PIIX4.

Signed-off-by: Hervé Poussineau <hpoussin@reactos.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
This commit is contained in:
Hervé Poussineau 2017-12-10 18:27:03 +01:00 committed by Michael S. Tsirkin
parent bcfdacfe2f
commit 880b1ffe6e
1 changed files with 15 additions and 1 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

16
hw/i2c/pm_smbus.c
View File

@ -63,6 +63,9 @@ static void smb_transaction(PMSMBus *s)
I2CBus *bus = s->smbus;
int ret;
assert(s->smb_stat & STS_HOST_BUSY);
s->smb_stat &= ~STS_HOST_BUSY;
SMBUS_DPRINTF("SMBus trans addr=0x%02x prot=0x%02x\n", addr, prot);
/* Transaction isn't exec if STS_DEV_ERR bit set */
if ((s->smb_stat & STS_DEV_ERR) != 0) {
@ -135,6 +138,13 @@ error:
}
static void smb_transaction_start(PMSMBus *s)
{
/* Do not execute immediately the command ; it will be
* executed when guest will read SMB_STAT register */
s->smb_stat |= STS_HOST_BUSY;
}
static void smb_ioport_writeb(void *opaque, hwaddr addr, uint64_t val,
unsigned width)
{
@ -150,7 +160,7 @@ static void smb_ioport_writeb(void *opaque, hwaddr addr, uint64_t val,
case SMBHSTCNT:
s->smb_ctl = val;
if (val & 0x40)
smb_transaction(s);
smb_transaction_start(s);
break;
case SMBHSTCMD:
s->smb_cmd = val;
@ -182,6 +192,10 @@ static uint64_t smb_ioport_readb(void *opaque, hwaddr addr, unsigned width)
switch(addr) {
case SMBHSTSTS:
val = s->smb_stat;
if (s->smb_stat & STS_HOST_BUSY) {
/* execute command now */
smb_transaction(s);
}
break;
case SMBHSTCNT:
s->smb_index = 0;