hw/arm/mps2-tz: Size the uart-irq-orgate based on the number of UARTs

We create an OR gate to wire together the overflow IRQs for all the
UARTs on the board; this has to have twice the number of inputs as
there are UARTs, since each UART feeds it a TX overflow and an RX
overflow interrupt line.  Replace the hardcoded '10' with a
calculation based on the size of the uart[] array in the
MPS2TZMachineState.  (We rely on OR gate inputs that are never wired
up or asserted being treated as always-zero.)

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210215115138.20465-15-peter.maydell@linaro.org
This commit is contained in:
Peter Maydell 2021-02-15 11:51:28 +00:00
parent b22c4e8b96
commit 8cf68ed935
1 changed files with 8 additions and 3 deletions

View File

@ -516,13 +516,18 @@ static void mps2tz_common_init(MachineState *machine)
*/
memory_region_add_subregion(system_memory, 0x80000000, machine->ram);
/* The overflow IRQs for all UARTs are ORed together.
/*
* The overflow IRQs for all UARTs are ORed together.
* Tx, Rx and "combined" IRQs are sent to the NVIC separately.
* Create the OR gate for this.
* Create the OR gate for this: it has one input for the TX overflow
* and one for the RX overflow for each UART we might have.
* (If the board has fewer than the maximum possible number of UARTs
* those inputs are never wired up and are treated as always-zero.)
*/
object_initialize_child(OBJECT(mms), "uart-irq-orgate",
&mms->uart_irq_orgate, TYPE_OR_IRQ);
object_property_set_int(OBJECT(&mms->uart_irq_orgate), "num-lines", 10,
object_property_set_int(OBJECT(&mms->uart_irq_orgate), "num-lines",
2 * ARRAY_SIZE(mms->uart),
&error_fatal);
qdev_realize(DEVICE(&mms->uart_irq_orgate), NULL, &error_fatal);
qdev_connect_gpio_out(DEVICE(&mms->uart_irq_orgate), 0,