From 9cf27d74a829f651c0da5d80c014a6cef9d4cbd8 Mon Sep 17 00:00:00 2001 From: Corey Minyard Date: Fri, 30 Nov 2018 13:38:21 -0600 Subject: [PATCH] i2c:smbus: Simplify write operation There were two different write functions and the SMBus code kept track of the command. Keeping track of the command wasn't useful, in fact it wasn't quite correct for the eeprom_smbus code. And there is no need for two write functions. Just have one write function and the first byte in the buffer is the command. Signed-off-by: Corey Minyard --- hw/i2c/smbus_eeprom.c | 47 ++++++++++++------------------------ hw/i2c/smbus_slave.c | 25 ++++--------------- include/hw/i2c/smbus_slave.h | 21 ++++++++++------ 3 files changed, 34 insertions(+), 59 deletions(-) diff --git a/hw/i2c/smbus_eeprom.c b/hw/i2c/smbus_eeprom.c index c8f6f4b442..7fbb5ca27f 100644 --- a/hw/i2c/smbus_eeprom.c +++ b/hw/i2c/smbus_eeprom.c @@ -45,16 +45,6 @@ static void eeprom_quick_cmd(SMBusDevice *dev, uint8_t read) #endif } -static void eeprom_send_byte(SMBusDevice *dev, uint8_t val) -{ - SMBusEEPROMDevice *eeprom = (SMBusEEPROMDevice *) dev; -#ifdef DEBUG - printf("eeprom_send_byte: addr=0x%02x val=0x%02x\n", - dev->i2c.address, val); -#endif - eeprom->offset = val; -} - static uint8_t eeprom_receive_byte(SMBusDevice *dev) { SMBusEEPROMDevice *eeprom = (SMBusEEPROMDevice *) dev; @@ -67,34 +57,30 @@ static uint8_t eeprom_receive_byte(SMBusDevice *dev) return val; } -static void eeprom_write_data(SMBusDevice *dev, uint8_t cmd, uint8_t *buf, int len) +static int eeprom_write_data(SMBusDevice *dev, uint8_t *buf, uint8_t len) { SMBusEEPROMDevice *eeprom = (SMBusEEPROMDevice *) dev; - int n; + uint8_t *data = eeprom->data; + #ifdef DEBUG printf("eeprom_write_byte: addr=0x%02x cmd=0x%02x val=0x%02x\n", - dev->i2c.address, cmd, buf[0]); + dev->i2c.address, buf[0], buf[1]); #endif - /* A page write operation is not a valid SMBus command. - It is a block write without a length byte. Fortunately we - get the full block anyway. */ - /* TODO: Should this set the current location? */ - if (cmd + len > 256) - n = 256 - cmd; - else - n = len; - memcpy(eeprom->data + cmd, buf, n); - len -= n; - if (len) - memcpy(eeprom->data, buf + n, len); + /* len is guaranteed to be > 0 */ + eeprom->offset = buf[0]; + buf++; + len--; + + for (; len > 0; len--) { + data[eeprom->offset] = *buf++; + eeprom->offset = (eeprom->offset + 1) % 256; + } + + return 0; } -static uint8_t eeprom_read_data(SMBusDevice *dev, uint8_t cmd, int n) +static uint8_t eeprom_read_data(SMBusDevice *dev, int n) { - SMBusEEPROMDevice *eeprom = (SMBusEEPROMDevice *) dev; - /* If this is the first byte then set the current position. */ - if (n == 0) - eeprom->offset = cmd; /* As with writes, we implement block reads without the SMBus length byte. */ return eeprom_receive_byte(dev); @@ -119,7 +105,6 @@ static void smbus_eeprom_class_initfn(ObjectClass *klass, void *data) dc->realize = smbus_eeprom_realize; sc->quick_cmd = eeprom_quick_cmd; - sc->send_byte = eeprom_send_byte; sc->receive_byte = eeprom_receive_byte; sc->write_data = eeprom_write_data; sc->read_data = eeprom_read_data; diff --git a/hw/i2c/smbus_slave.c b/hw/i2c/smbus_slave.c index 6a89a286e3..92c7a5086c 100644 --- a/hw/i2c/smbus_slave.c +++ b/hw/i2c/smbus_slave.c @@ -54,18 +54,9 @@ static void smbus_do_write(SMBusDevice *dev) { SMBusDeviceClass *sc = SMBUS_DEVICE_GET_CLASS(dev); - if (dev->data_len == 1) { - DPRINTF("Send Byte\n"); - if (sc->send_byte) { - sc->send_byte(dev, dev->data_buf[0]); - } - } else { - dev->command = dev->data_buf[0]; - DPRINTF("Command %d len %d\n", dev->command, dev->data_len - 1); - if (sc->write_data) { - sc->write_data(dev, dev->command, dev->data_buf + 1, - dev->data_len - 1); - } + DPRINTF("Command %d len %d\n", dev->data_buf[0], dev->data_len); + if (sc->write_data) { + sc->write_data(dev, dev->data_buf, dev->data_len); } } @@ -98,13 +89,7 @@ static int smbus_i2c_event(I2CSlave *s, enum i2c_event event) BADF("Read after write with no data\n"); dev->mode = SMBUS_CONFUSED; } else { - if (dev->data_len > 1) { - smbus_do_write(dev); - } else { - dev->command = dev->data_buf[0]; - DPRINTF("%02x: Command %d\n", dev->i2c.address, - dev->command); - } + smbus_do_write(dev); DPRINTF("Read mode\n"); dev->data_len = 0; dev->mode = SMBUS_READ_DATA; @@ -177,7 +162,7 @@ static uint8_t smbus_i2c_recv(I2CSlave *s) break; case SMBUS_READ_DATA: if (sc->read_data) { - ret = sc->read_data(dev, dev->command, dev->data_len); + ret = sc->read_data(dev, dev->data_len); dev->data_len++; } else { ret = 0; diff --git a/include/hw/i2c/smbus_slave.h b/include/hw/i2c/smbus_slave.h index 5ef1c72ad0..fa92201ec6 100644 --- a/include/hw/i2c/smbus_slave.h +++ b/include/hw/i2c/smbus_slave.h @@ -46,18 +46,24 @@ typedef struct SMBusDeviceClass * This may be NULL, quick commands are ignore in that case. */ void (*quick_cmd)(SMBusDevice *dev, uint8_t read); - void (*send_byte)(SMBusDevice *dev, uint8_t val); + uint8_t (*receive_byte)(SMBusDevice *dev); - /* We can't distinguish between a word write and a block write with - length 1, so pass the whole data block including the length byte - (if present). The device is responsible figuring out what type of - command this is. */ - void (*write_data)(SMBusDevice *dev, uint8_t cmd, uint8_t *buf, int len); + + /* + * We can't distinguish between a word write and a block write with + * length 1, so pass the whole data block including the length byte + * (if present). The device is responsible figuring out what type of + * command this is. + * This may be NULL if no data is written to the device. Writes + * will be ignore in that case. + */ + int (*write_data)(SMBusDevice *dev, uint8_t *buf, uint8_t len); + /* Likewise we can't distinguish between different reads, or even know the length of the read until the read is complete, so read data a byte at a time. The device is responsible for adding the length byte on block reads. */ - uint8_t (*read_data)(SMBusDevice *dev, uint8_t cmd, int n); + uint8_t (*read_data)(SMBusDevice *dev, int n); } SMBusDeviceClass; struct SMBusDevice { @@ -68,7 +74,6 @@ struct SMBusDevice { int mode; int data_len; uint8_t data_buf[34]; /* command + len + 32 bytes of data. */ - uint8_t command; }; #endif