OpenE2K/qemu-e2k
13
4
Fork 0
Code Issues 4 Pull Requests Projects 2 Releases Activity

AHCI: Do not (re)map FB/CLB buffers while not running

Browse Source 
The FIS Receive Buffer and Command List Buffer pointers
should not be edited while the FIS receive engine or
Command Receive engines are running.

Currently, we attempt to re-map the buffers every time they
are adjusted, but while the AHCI engines are off, these registers
may contain stale values, so we should not attempt to re-map these
values until the engines are reactivated.

Reported-by: Jordan Hargrave <jharg93@gmail.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 1426283454-15590-2-git-send-email-jsnow@redhat.com
This commit is contained in:
John Snow 2015-03-27 15:48:11 -04:00
parent b27e767e8c
commit a13ab5a35b
1 changed files with 33 additions and 17 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

50
hw/ide/ahci.c
View File

@ -51,6 +51,8 @@ static void ahci_write_fis_d2h(AHCIDevice *ad, uint8_t *cmd_fis);
static void ahci_init_d2h(AHCIDevice *ad);
static int ahci_dma_prepare_buf(IDEDMA *dma, int is_write);
static void ahci_commit_buf(IDEDMA *dma, uint32_t tx_bytes);
static bool ahci_map_clb_address(AHCIDevice *ad);
static bool ahci_map_fis_address(AHCIDevice *ad);
static uint32_t ahci_port_read(AHCIState *s, int port, int offset)
@ -202,25 +204,15 @@ static void ahci_port_write(AHCIState *s, int port, int offset, uint32_t val)
switch (offset) {
case PORT_LST_ADDR:
pr->lst_addr = val;
map_page(s->as, &s->dev[port].lst,
((uint64_t)pr->lst_addr_hi << 32) | pr->lst_addr, 1024);
s->dev[port].cur_cmd = NULL;
break;
case PORT_LST_ADDR_HI:
pr->lst_addr_hi = val;
map_page(s->as, &s->dev[port].lst,
((uint64_t)pr->lst_addr_hi << 32) | pr->lst_addr, 1024);
s->dev[port].cur_cmd = NULL;
break;
case PORT_FIS_ADDR:
pr->fis_addr = val;
map_page(s->as, &s->dev[port].res_fis,
((uint64_t)pr->fis_addr_hi << 32) | pr->fis_addr, 256);
break;
case PORT_FIS_ADDR_HI:
pr->fis_addr_hi = val;
map_page(s->as, &s->dev[port].res_fis,
((uint64_t)pr->fis_addr_hi << 32) | pr->fis_addr, 256);
break;
case PORT_IRQ_STAT:
pr->irq_stat &= ~val;
@ -234,11 +226,21 @@ static void ahci_port_write(AHCIState *s, int port, int offset, uint32_t val)
pr->cmd = val & ~(PORT_CMD_LIST_ON | PORT_CMD_FIS_ON);
if (pr->cmd & PORT_CMD_START) {
pr->cmd |= PORT_CMD_LIST_ON;
if (ahci_map_clb_address(&s->dev[port])) {
pr->cmd |= PORT_CMD_LIST_ON;
} else {
error_report("AHCI: Failed to start DMA engine: "
"bad command list buffer address");
}
}
if (pr->cmd & PORT_CMD_FIS_RX) {
pr->cmd |= PORT_CMD_FIS_ON;
if (ahci_map_fis_address(&s->dev[port])) {
pr->cmd |= PORT_CMD_FIS_ON;
} else {
error_report("AHCI: Failed to start FIS receive engine: "
"bad FIS receive buffer address");
}
}
/* XXX usually the FIS would be pending on the bus here and
@ -565,6 +567,23 @@ static void debug_print_fis(uint8_t *fis, int cmd_len)
#endif
}
static bool ahci_map_fis_address(AHCIDevice *ad)
{
AHCIPortRegs *pr = &ad->port_regs;
map_page(ad->hba->as, &ad->res_fis,
((uint64_t)pr->fis_addr_hi << 32) | pr->fis_addr, 256);
return ad->res_fis != NULL;
}
static bool ahci_map_clb_address(AHCIDevice *ad)
{
AHCIPortRegs *pr = &ad->port_regs;
ad->cur_cmd = NULL;
map_page(ad->hba->as, &ad->lst,
((uint64_t)pr->lst_addr_hi << 32) | pr->lst_addr, 1024);
return ad->lst != NULL;
}
static void ahci_write_fis_sdb(AHCIState *s, int port, uint32_t finished)
{
AHCIDevice *ad = &s->dev[port];
@ -1360,12 +1379,9 @@ static int ahci_state_post_load(void *opaque, int version_id)
for (i = 0; i < s->ports; i++) {
ad = &s->dev[i];
AHCIPortRegs *pr = &ad->port_regs;
map_page(s->as, &ad->lst,
((uint64_t)pr->lst_addr_hi << 32) | pr->lst_addr, 1024);
map_page(s->as, &ad->res_fis,
((uint64_t)pr->fis_addr_hi << 32) | pr->fis_addr, 256);
ahci_map_clb_address(ad);
ahci_map_fis_address(ad);
/*
* If an error is present, ad->busy_slot will be valid and not -1.
* In this case, an operation is waiting to resume and will re-check