From 5feeb718d7914c3c921cc811a5844488a5644ea6 Mon Sep 17 00:00:00 2001 From: Paul Durrant Date: Tue, 9 Apr 2019 17:40:38 +0100 Subject: [PATCH 1/8] xen-block: support feature-large-sector-size A recent Xen commit [1] clarified the semantics of sector based quantities used in the blkif protocol such that it is now safe to create a xen-block device with a logical_block_size != 512, as long as the device only connects to a frontend advertizing 'feature-large-block-size'. This patch modifies xen-block accordingly. It also uses a stack variable for the BlockBackend in xen_block_realize() to avoid repeated dereferencing of the BlockConf pointer, and changes the parameters of xen_block_dataplane_create() so that the BlockBackend pointer and sector size are passed expicitly rather than implicitly via the BlockConf. These modifications have been tested against a recent Windows PV XENVBD driver [2] using a xen-disk device with a 4kB logical block size. [1] http://xenbits.xen.org/gitweb/?p=xen.git;a=commit;h=67e1c050e36b2c9900cca83618e56189effbad98 [2] https://winpvdrvbuild.xenproject.org:8080/job/XENVBD-master/126 Signed-off-by: Paul Durrant Reviewed-by: Anthony PERARD Message-Id: <20190409164038.25484-1-paul.durrant@citrix.com> [Edited error message] Signed-off-by: Anthony PERARD --- hw/block/dataplane/xen-block.c | 25 ++++++++++++---------- hw/block/dataplane/xen-block.h | 3 ++- hw/block/xen-block.c | 38 +++++++++++++++++++++------------- 3 files changed, 40 insertions(+), 26 deletions(-) diff --git a/hw/block/dataplane/xen-block.c b/hw/block/dataplane/xen-block.c index f7ad452bbd..6da5c77fbb 100644 --- a/hw/block/dataplane/xen-block.c +++ b/hw/block/dataplane/xen-block.c @@ -58,6 +58,7 @@ struct XenBlockDataPlane { int requests_inflight; unsigned int max_requests; BlockBackend *blk; + unsigned int sector_size; QEMUBH *bh; IOThread *iothread; AioContext *ctx; @@ -167,7 +168,7 @@ static int xen_block_parse_request(XenBlockRequest *request) goto err; } - request->start = request->req.sector_number * XEN_BLKIF_SECTOR_SIZE; + request->start = request->req.sector_number * dataplane->sector_size; for (i = 0; i < request->req.nr_segments; i++) { if (i == BLKIF_MAX_SEGMENTS_PER_REQUEST) { error_report("error: nr_segments too big"); @@ -177,14 +178,14 @@ static int xen_block_parse_request(XenBlockRequest *request) error_report("error: first > last sector"); goto err; } - if (request->req.seg[i].last_sect * XEN_BLKIF_SECTOR_SIZE >= + if (request->req.seg[i].last_sect * dataplane->sector_size >= XC_PAGE_SIZE) { error_report("error: page crossing"); goto err; } len = (request->req.seg[i].last_sect - - request->req.seg[i].first_sect + 1) * XEN_BLKIF_SECTOR_SIZE; + request->req.seg[i].first_sect + 1) * dataplane->sector_size; request->size += len; } if (request->start + request->size > blk_getlength(dataplane->blk)) { @@ -218,17 +219,17 @@ static int xen_block_copy_request(XenBlockRequest *request) if (to_domain) { segs[i].dest.foreign.ref = request->req.seg[i].gref; segs[i].dest.foreign.offset = request->req.seg[i].first_sect * - XEN_BLKIF_SECTOR_SIZE; + dataplane->sector_size; segs[i].source.virt = virt; } else { segs[i].source.foreign.ref = request->req.seg[i].gref; segs[i].source.foreign.offset = request->req.seg[i].first_sect * - XEN_BLKIF_SECTOR_SIZE; + dataplane->sector_size; segs[i].dest.virt = virt; } segs[i].len = (request->req.seg[i].last_sect - request->req.seg[i].first_sect + 1) * - XEN_BLKIF_SECTOR_SIZE; + dataplane->sector_size; virt += segs[i].len; } @@ -336,12 +337,12 @@ static bool xen_block_split_discard(XenBlockRequest *request, /* Wrap around, or overflowing byte limit? */ if (sec_start + sec_count < sec_count || - sec_start + sec_count > INT64_MAX / XEN_BLKIF_SECTOR_SIZE) { + sec_start + sec_count > INT64_MAX / dataplane->sector_size) { return false; } - byte_offset = sec_start * XEN_BLKIF_SECTOR_SIZE; - byte_remaining = sec_count * XEN_BLKIF_SECTOR_SIZE; + byte_offset = sec_start * dataplane->sector_size; + byte_remaining = sec_count * dataplane->sector_size; do { byte_chunk = byte_remaining > BDRV_REQUEST_MAX_BYTES ? @@ -625,13 +626,15 @@ static void xen_block_dataplane_event(void *opaque) } XenBlockDataPlane *xen_block_dataplane_create(XenDevice *xendev, - BlockConf *conf, + BlockBackend *blk, + unsigned int sector_size, IOThread *iothread) { XenBlockDataPlane *dataplane = g_new0(XenBlockDataPlane, 1); dataplane->xendev = xendev; - dataplane->blk = conf->blk; + dataplane->blk = blk; + dataplane->sector_size = sector_size; QLIST_INIT(&dataplane->inflight); QLIST_INIT(&dataplane->freelist); diff --git a/hw/block/dataplane/xen-block.h b/hw/block/dataplane/xen-block.h index d6fa6d26dd..76dcd51c3d 100644 --- a/hw/block/dataplane/xen-block.h +++ b/hw/block/dataplane/xen-block.h @@ -15,7 +15,8 @@ typedef struct XenBlockDataPlane XenBlockDataPlane; XenBlockDataPlane *xen_block_dataplane_create(XenDevice *xendev, - BlockConf *conf, + BlockBackend *blk, + unsigned int sector_size, IOThread *iothread); void xen_block_dataplane_destroy(XenBlockDataPlane *dataplane); void xen_block_dataplane_start(XenBlockDataPlane *dataplane, diff --git a/hw/block/xen-block.c b/hw/block/xen-block.c index 4de537aef4..8f224ef81d 100644 --- a/hw/block/xen-block.c +++ b/hw/block/xen-block.c @@ -52,11 +52,25 @@ static void xen_block_connect(XenDevice *xendev, Error **errp) XenBlockDevice *blockdev = XEN_BLOCK_DEVICE(xendev); const char *type = object_get_typename(OBJECT(blockdev)); XenBlockVdev *vdev = &blockdev->props.vdev; + BlockConf *conf = &blockdev->props.conf; + unsigned int feature_large_sector_size; unsigned int order, nr_ring_ref, *ring_ref, event_channel, protocol; char *str; trace_xen_block_connect(type, vdev->disk, vdev->partition); + if (xen_device_frontend_scanf(xendev, "feature-large-sector-size", "%u", + &feature_large_sector_size) != 1) { + feature_large_sector_size = 0; + } + + if (feature_large_sector_size != 1 && + conf->logical_block_size != XEN_BLKIF_SECTOR_SIZE) { + error_setg(errp, "logical_block_size != %u not supported by frontend", + XEN_BLKIF_SECTOR_SIZE); + return; + } + if (xen_device_frontend_scanf(xendev, "ring-page-order", "%u", &order) != 1) { nr_ring_ref = 1; @@ -150,7 +164,7 @@ static void xen_block_set_size(XenBlockDevice *blockdev) const char *type = object_get_typename(OBJECT(blockdev)); XenBlockVdev *vdev = &blockdev->props.vdev; BlockConf *conf = &blockdev->props.conf; - int64_t sectors = blk_getlength(conf->blk) / XEN_BLKIF_SECTOR_SIZE; + int64_t sectors = blk_getlength(conf->blk) / conf->logical_block_size; XenDevice *xendev = XEN_DEVICE(blockdev); trace_xen_block_size(type, vdev->disk, vdev->partition, sectors); @@ -185,6 +199,7 @@ static void xen_block_realize(XenDevice *xendev, Error **errp) const char *type = object_get_typename(OBJECT(blockdev)); XenBlockVdev *vdev = &blockdev->props.vdev; BlockConf *conf = &blockdev->props.conf; + BlockBackend *blk = conf->blk; Error *local_err = NULL; if (vdev->type == XEN_BLOCK_VDEV_TYPE_INVALID) { @@ -206,8 +221,8 @@ static void xen_block_realize(XenDevice *xendev, Error **errp) * The blkif protocol does not deal with removable media, so it must * always be present, even for CDRom devices. */ - assert(conf->blk); - if (!blk_is_inserted(conf->blk)) { + assert(blk); + if (!blk_is_inserted(blk)) { error_setg(errp, "device needs media, but drive is empty"); return; } @@ -224,26 +239,20 @@ static void xen_block_realize(XenDevice *xendev, Error **errp) blkconf_blocksizes(conf); - if (conf->logical_block_size != XEN_BLKIF_SECTOR_SIZE) { - error_setg(errp, "logical_block_size != %u not supported", - XEN_BLKIF_SECTOR_SIZE); - return; - } - if (conf->logical_block_size > conf->physical_block_size) { error_setg( errp, "logical_block_size > physical_block_size not supported"); return; } - blk_set_dev_ops(conf->blk, &xen_block_dev_ops, blockdev); - blk_set_guest_block_size(conf->blk, conf->logical_block_size); + blk_set_dev_ops(blk, &xen_block_dev_ops, blockdev); + blk_set_guest_block_size(blk, conf->logical_block_size); if (conf->discard_granularity == -1) { conf->discard_granularity = conf->physical_block_size; } - if (blk_get_flags(conf->blk) & BDRV_O_UNMAP) { + if (blk_get_flags(blk) & BDRV_O_UNMAP) { xen_device_backend_printf(xendev, "feature-discard", "%u", 1); xen_device_backend_printf(xendev, "discard-granularity", "%u", conf->discard_granularity); @@ -260,12 +269,13 @@ static void xen_block_realize(XenDevice *xendev, Error **errp) blockdev->device_type); xen_device_backend_printf(xendev, "sector-size", "%u", - XEN_BLKIF_SECTOR_SIZE); + conf->logical_block_size); xen_block_set_size(blockdev); blockdev->dataplane = - xen_block_dataplane_create(xendev, conf, blockdev->props.iothread); + xen_block_dataplane_create(xendev, blk, conf->logical_block_size, + blockdev->props.iothread); } static void xen_block_frontend_changed(XenDevice *xendev, From c0b336ea19a93801ee2333be525d0473d28a10f8 Mon Sep 17 00:00:00 2001 From: Paul Durrant Date: Mon, 8 Apr 2019 16:16:15 +0100 Subject: [PATCH 2/8] xen-bus: use a separate fd for each event channel To better support use of IOThread-s it will be necessary to be able to set the AioContext for each XenEventChannel and hence it is necessary to open a separate handle to libxenevtchan for each channel. This patch stops using NotifierList for event channel callbacks, replacing that construct by a list of complete XenEventChannel structures. Each of these now has a xenevtchn_handle pointer in place of the single pointer previously held in the XenDevice structure. The individual handles are opened/closed in xen_device_bind/unbind_event_channel(), replacing the single open/close in xen_device_realize/unrealize(). NOTE: This patch does not add an AioContext parameter to xen_device_bind_event_channel(). That will be done in a subsequent patch. Signed-off-by: Paul Durrant Reviewed-by: Anthony PERARD Message-Id: <20190408151617.13025-2-paul.durrant@citrix.com> Signed-off-by: Anthony PERARD --- hw/xen/xen-bus.c | 79 ++++++++++++++++++++-------------------- include/hw/xen/xen-bus.h | 6 +-- 2 files changed, 42 insertions(+), 43 deletions(-) diff --git a/hw/xen/xen-bus.c b/hw/xen/xen-bus.c index a4416d0bcf..43a90cae42 100644 --- a/hw/xen/xen-bus.c +++ b/hw/xen/xen-bus.c @@ -924,19 +924,22 @@ done: } struct XenEventChannel { + QLIST_ENTRY(XenEventChannel) list; + xenevtchn_handle *xeh; evtchn_port_t local_port; XenEventHandler handler; void *opaque; - Notifier notifier; }; -static void event_notify(Notifier *n, void *data) +static void xen_device_event(void *opaque) { - XenEventChannel *channel = container_of(n, XenEventChannel, notifier); - unsigned long port = (unsigned long)data; + XenEventChannel *channel = opaque; + unsigned long port = xenevtchn_pending(channel->xeh); if (port == channel->local_port) { channel->handler(channel->opaque); + + xenevtchn_unmask(channel->xeh, port); } } @@ -948,24 +951,39 @@ XenEventChannel *xen_device_bind_event_channel(XenDevice *xendev, XenEventChannel *channel = g_new0(XenEventChannel, 1); xenevtchn_port_or_error_t local_port; - local_port = xenevtchn_bind_interdomain(xendev->xeh, + channel->xeh = xenevtchn_open(NULL, 0); + if (!channel->xeh) { + error_setg_errno(errp, errno, "failed xenevtchn_open"); + goto fail; + } + + local_port = xenevtchn_bind_interdomain(channel->xeh, xendev->frontend_id, port); if (local_port < 0) { error_setg_errno(errp, errno, "xenevtchn_bind_interdomain failed"); - - g_free(channel); - return NULL; + goto fail; } channel->local_port = local_port; channel->handler = handler; channel->opaque = opaque; - channel->notifier.notify = event_notify; - notifier_list_add(&xendev->event_notifiers, &channel->notifier); + qemu_set_fd_handler(xenevtchn_fd(channel->xeh), xen_device_event, NULL, + channel); + + QLIST_INSERT_HEAD(&xendev->event_channels, channel, list); return channel; + +fail: + if (channel->xeh) { + xenevtchn_close(channel->xeh); + } + + g_free(channel); + + return NULL; } void xen_device_notify_event_channel(XenDevice *xendev, @@ -977,7 +995,7 @@ void xen_device_notify_event_channel(XenDevice *xendev, return; } - if (xenevtchn_notify(xendev->xeh, channel->local_port) < 0) { + if (xenevtchn_notify(channel->xeh, channel->local_port) < 0) { error_setg_errno(errp, errno, "xenevtchn_notify failed"); } } @@ -991,12 +1009,15 @@ void xen_device_unbind_event_channel(XenDevice *xendev, return; } - notifier_remove(&channel->notifier); + QLIST_REMOVE(channel, list); - if (xenevtchn_unbind(xendev->xeh, channel->local_port) < 0) { + qemu_set_fd_handler(xenevtchn_fd(channel->xeh), NULL, NULL, NULL); + + if (xenevtchn_unbind(channel->xeh, channel->local_port) < 0) { error_setg_errno(errp, errno, "xenevtchn_unbind failed"); } + xenevtchn_close(channel->xeh); g_free(channel); } @@ -1005,6 +1026,7 @@ static void xen_device_unrealize(DeviceState *dev, Error **errp) XenDevice *xendev = XEN_DEVICE(dev); XenDeviceClass *xendev_class = XEN_DEVICE_GET_CLASS(xendev); const char *type = object_get_typename(OBJECT(xendev)); + XenEventChannel *channel, *next; if (!xendev->name) { return; @@ -1021,15 +1043,14 @@ static void xen_device_unrealize(DeviceState *dev, Error **errp) xendev_class->unrealize(xendev, errp); } + /* Make sure all event channels are cleaned up */ + QLIST_FOREACH_SAFE(channel, &xendev->event_channels, list, next) { + xen_device_unbind_event_channel(xendev, channel, NULL); + } + xen_device_frontend_destroy(xendev); xen_device_backend_destroy(xendev); - if (xendev->xeh) { - qemu_set_fd_handler(xenevtchn_fd(xendev->xeh), NULL, NULL, NULL); - xenevtchn_close(xendev->xeh); - xendev->xeh = NULL; - } - if (xendev->xgth) { xengnttab_close(xendev->xgth); xendev->xgth = NULL; @@ -1046,16 +1067,6 @@ static void xen_device_exit(Notifier *n, void *data) xen_device_unrealize(DEVICE(xendev), &error_abort); } -static void xen_device_event(void *opaque) -{ - XenDevice *xendev = opaque; - unsigned long port = xenevtchn_pending(xendev->xeh); - - notifier_list_notify(&xendev->event_notifiers, (void *)port); - - xenevtchn_unmask(xendev->xeh, port); -} - static void xen_device_realize(DeviceState *dev, Error **errp) { XenDevice *xendev = XEN_DEVICE(dev); @@ -1096,16 +1107,6 @@ static void xen_device_realize(DeviceState *dev, Error **errp) xendev->feature_grant_copy = (xengnttab_grant_copy(xendev->xgth, 0, NULL) == 0); - xendev->xeh = xenevtchn_open(NULL, 0); - if (!xendev->xeh) { - error_setg_errno(errp, errno, "failed xenevtchn_open"); - goto unrealize; - } - - notifier_list_init(&xendev->event_notifiers); - qemu_set_fd_handler(xenevtchn_fd(xendev->xeh), xen_device_event, NULL, - xendev); - xen_device_backend_create(xendev, &local_err); if (local_err) { error_propagate(errp, local_err); diff --git a/include/hw/xen/xen-bus.h b/include/hw/xen/xen-bus.h index 3183f10e3c..3315f0de20 100644 --- a/include/hw/xen/xen-bus.h +++ b/include/hw/xen/xen-bus.h @@ -15,6 +15,7 @@ typedef void (*XenWatchHandler)(void *opaque); typedef struct XenWatch XenWatch; +typedef struct XenEventChannel XenEventChannel; typedef struct XenDevice { DeviceState qdev; @@ -28,8 +29,7 @@ typedef struct XenDevice { XenWatch *backend_online_watch; xengnttab_handle *xgth; bool feature_grant_copy; - xenevtchn_handle *xeh; - NotifierList event_notifiers; + QLIST_HEAD(, XenEventChannel) event_channels; } XenDevice; typedef char *(*XenDeviceGetName)(XenDevice *xendev, Error **errp); @@ -119,8 +119,6 @@ void xen_device_copy_grant_refs(XenDevice *xendev, bool to_domain, XenDeviceGrantCopySegment segs[], unsigned int nr_segs, Error **errp); -typedef struct XenEventChannel XenEventChannel; - typedef void (*XenEventHandler)(void *opaque); XenEventChannel *xen_device_bind_event_channel(XenDevice *xendev, From 83361a8a1f932cfac8ae4a5b86e935ad6ab1c528 Mon Sep 17 00:00:00 2001 From: Paul Durrant Date: Mon, 8 Apr 2019 16:16:16 +0100 Subject: [PATCH 3/8] xen-bus: allow AioContext to be specified for each event channel This patch adds an AioContext parameter to xen_device_bind_event_channel() and then uses aio_set_fd_handler() to set the callback rather than qemu_set_fd_handler(). Signed-off-by: Paul Durrant Reviewed-by: Anthony PERARD Message-Id: <20190408151617.13025-3-paul.durrant@citrix.com> [Call aio_set_fd_handler() with is_external=true] Signed-off-by: Anthony PERARD --- hw/block/dataplane/xen-block.c | 2 +- hw/xen/xen-bus.c | 10 +++++++--- include/hw/xen/xen-bus.h | 1 + 3 files changed, 9 insertions(+), 4 deletions(-) diff --git a/hw/block/dataplane/xen-block.c b/hw/block/dataplane/xen-block.c index 6da5c77fbb..aadca75644 100644 --- a/hw/block/dataplane/xen-block.c +++ b/hw/block/dataplane/xen-block.c @@ -806,7 +806,7 @@ void xen_block_dataplane_start(XenBlockDataPlane *dataplane, } dataplane->event_channel = - xen_device_bind_event_channel(xendev, event_channel, + xen_device_bind_event_channel(xendev, dataplane->ctx, event_channel, xen_block_dataplane_event, dataplane, &local_err); if (local_err) { diff --git a/hw/xen/xen-bus.c b/hw/xen/xen-bus.c index 43a90cae42..2210526490 100644 --- a/hw/xen/xen-bus.c +++ b/hw/xen/xen-bus.c @@ -925,6 +925,7 @@ done: struct XenEventChannel { QLIST_ENTRY(XenEventChannel) list; + AioContext *ctx; xenevtchn_handle *xeh; evtchn_port_t local_port; XenEventHandler handler; @@ -944,6 +945,7 @@ static void xen_device_event(void *opaque) } XenEventChannel *xen_device_bind_event_channel(XenDevice *xendev, + AioContext *ctx, unsigned int port, XenEventHandler handler, void *opaque, Error **errp) @@ -969,8 +971,9 @@ XenEventChannel *xen_device_bind_event_channel(XenDevice *xendev, channel->handler = handler; channel->opaque = opaque; - qemu_set_fd_handler(xenevtchn_fd(channel->xeh), xen_device_event, NULL, - channel); + channel->ctx = ctx; + aio_set_fd_handler(channel->ctx, xenevtchn_fd(channel->xeh), true, + xen_device_event, NULL, NULL, channel); QLIST_INSERT_HEAD(&xendev->event_channels, channel, list); @@ -1011,7 +1014,8 @@ void xen_device_unbind_event_channel(XenDevice *xendev, QLIST_REMOVE(channel, list); - qemu_set_fd_handler(xenevtchn_fd(channel->xeh), NULL, NULL, NULL); + aio_set_fd_handler(channel->ctx, xenevtchn_fd(channel->xeh), true, + NULL, NULL, NULL, NULL); if (xenevtchn_unbind(channel->xeh, channel->local_port) < 0) { error_setg_errno(errp, errno, "xenevtchn_unbind failed"); diff --git a/include/hw/xen/xen-bus.h b/include/hw/xen/xen-bus.h index 3315f0de20..8183b98c7d 100644 --- a/include/hw/xen/xen-bus.h +++ b/include/hw/xen/xen-bus.h @@ -122,6 +122,7 @@ void xen_device_copy_grant_refs(XenDevice *xendev, bool to_domain, typedef void (*XenEventHandler)(void *opaque); XenEventChannel *xen_device_bind_event_channel(XenDevice *xendev, + AioContext *ctx, unsigned int port, XenEventHandler handler, void *opaque, Error **errp); From 345f42b4be9f9975ff3f7f3e95acae4f67c74f89 Mon Sep 17 00:00:00 2001 From: Paul Durrant Date: Mon, 8 Apr 2019 16:16:17 +0100 Subject: [PATCH 4/8] xen-bus / xen-block: add support for event channel polling This patch introduces a poll callback for event channel fd-s and uses this to invoke the channel callback function. To properly support polling, it is necessary for the event channel callback function to return a boolean saying whether it has done any useful work or not. Thus xen_block_dataplane_event() is modified to directly invoke xen_block_handle_requests() and the latter only returns true if it actually processes any requests. This also means that the call to qemu_bh_schedule() is moved into xen_block_complete_aio(), which is more intuitive since the only reason for doing a deferred poll of the shared ring should be because there were previously insufficient resources to fully complete a previous poll. Signed-off-by: Paul Durrant Reviewed-by: Anthony PERARD Message-Id: <20190408151617.13025-4-paul.durrant@citrix.com> Signed-off-by: Anthony PERARD --- hw/block/dataplane/xen-block.c | 17 +++++++++-------- hw/xen/xen-bus.c | 11 +++++++++-- include/hw/xen/xen-bus.h | 2 +- 3 files changed, 19 insertions(+), 11 deletions(-) diff --git a/hw/block/dataplane/xen-block.c b/hw/block/dataplane/xen-block.c index aadca75644..0f200c5fb0 100644 --- a/hw/block/dataplane/xen-block.c +++ b/hw/block/dataplane/xen-block.c @@ -318,7 +318,9 @@ static void xen_block_complete_aio(void *opaque, int ret) } xen_block_release_request(request); - qemu_bh_schedule(dataplane->bh); + if (dataplane->more_work) { + qemu_bh_schedule(dataplane->bh); + } done: aio_context_release(dataplane->ctx); @@ -515,12 +517,13 @@ static int xen_block_get_request(XenBlockDataPlane *dataplane, */ #define IO_PLUG_THRESHOLD 1 -static void xen_block_handle_requests(XenBlockDataPlane *dataplane) +static bool xen_block_handle_requests(XenBlockDataPlane *dataplane) { RING_IDX rc, rp; XenBlockRequest *request; int inflight_atstart = dataplane->requests_inflight; int batched = 0; + bool done_something = false; dataplane->more_work = 0; @@ -552,6 +555,7 @@ static void xen_block_handle_requests(XenBlockDataPlane *dataplane) } xen_block_get_request(dataplane, request, rc); dataplane->rings.common.req_cons = ++rc; + done_something = true; /* parse them */ if (xen_block_parse_request(request) != 0) { @@ -603,10 +607,7 @@ static void xen_block_handle_requests(XenBlockDataPlane *dataplane) blk_io_unplug(dataplane->blk); } - if (dataplane->more_work && - dataplane->requests_inflight < dataplane->max_requests) { - qemu_bh_schedule(dataplane->bh); - } + return done_something; } static void xen_block_dataplane_bh(void *opaque) @@ -618,11 +619,11 @@ static void xen_block_dataplane_bh(void *opaque) aio_context_release(dataplane->ctx); } -static void xen_block_dataplane_event(void *opaque) +static bool xen_block_dataplane_event(void *opaque) { XenBlockDataPlane *dataplane = opaque; - qemu_bh_schedule(dataplane->bh); + return xen_block_handle_requests(dataplane); } XenBlockDataPlane *xen_block_dataplane_create(XenDevice *xendev, diff --git a/hw/xen/xen-bus.c b/hw/xen/xen-bus.c index 2210526490..7503eea9e9 100644 --- a/hw/xen/xen-bus.c +++ b/hw/xen/xen-bus.c @@ -932,13 +932,20 @@ struct XenEventChannel { void *opaque; }; +static bool xen_device_poll(void *opaque) +{ + XenEventChannel *channel = opaque; + + return channel->handler(channel->opaque); +} + static void xen_device_event(void *opaque) { XenEventChannel *channel = opaque; unsigned long port = xenevtchn_pending(channel->xeh); if (port == channel->local_port) { - channel->handler(channel->opaque); + xen_device_poll(channel); xenevtchn_unmask(channel->xeh, port); } @@ -973,7 +980,7 @@ XenEventChannel *xen_device_bind_event_channel(XenDevice *xendev, channel->ctx = ctx; aio_set_fd_handler(channel->ctx, xenevtchn_fd(channel->xeh), true, - xen_device_event, NULL, NULL, channel); + xen_device_event, NULL, xen_device_poll, channel); QLIST_INSERT_HEAD(&xendev->event_channels, channel, list); diff --git a/include/hw/xen/xen-bus.h b/include/hw/xen/xen-bus.h index 8183b98c7d..1c2d9dfdb8 100644 --- a/include/hw/xen/xen-bus.h +++ b/include/hw/xen/xen-bus.h @@ -119,7 +119,7 @@ void xen_device_copy_grant_refs(XenDevice *xendev, bool to_domain, XenDeviceGrantCopySegment segs[], unsigned int nr_segs, Error **errp); -typedef void (*XenEventHandler)(void *opaque); +typedef bool (*XenEventHandler)(void *opaque); XenEventChannel *xen_device_bind_event_channel(XenDevice *xendev, AioContext *ctx, From 34fbbc164fded65341f9fc299b118c90925d5b1f Mon Sep 17 00:00:00 2001 From: Anthony PERARD Date: Tue, 18 Jun 2019 12:23:41 +0100 Subject: [PATCH 5/8] xen: Avoid VLA MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Avoid using a variable length array. We allocate the `dirty_bitmap' buffer only once when we start tracking for dirty bits. Signed-off-by: Anthony PERARD Reviewed-by: Paul Durrant Reviewed-by: Philippe Mathieu-Daudé Message-Id: <20190618112341.513-5-anthony.perard@citrix.com> --- hw/i386/xen/xen-hvm.c | 15 +++++++++++---- 1 file changed, 11 insertions(+), 4 deletions(-) diff --git a/hw/i386/xen/xen-hvm.c b/hw/i386/xen/xen-hvm.c index 2939122e7c..ed9c37c72d 100644 --- a/hw/i386/xen/xen-hvm.c +++ b/hw/i386/xen/xen-hvm.c @@ -120,6 +120,8 @@ typedef struct XenIOState { DeviceListener device_listener; hwaddr free_phys_offset; const XenPhysmap *log_for_dirtybit; + /* Buffer used by xen_sync_dirty_bitmap */ + unsigned long *dirty_bitmap; Notifier exit; Notifier suspend; @@ -465,6 +467,8 @@ static int xen_remove_from_physmap(XenIOState *state, QLIST_REMOVE(physmap, list); if (state->log_for_dirtybit == physmap) { state->log_for_dirtybit = NULL; + g_free(state->dirty_bitmap); + state->dirty_bitmap = NULL; } g_free(physmap); @@ -615,7 +619,7 @@ static void xen_sync_dirty_bitmap(XenIOState *state, { hwaddr npages = size >> TARGET_PAGE_BITS; const int width = sizeof(unsigned long) * 8; - unsigned long bitmap[DIV_ROUND_UP(npages, width)]; + size_t bitmap_size = DIV_ROUND_UP(npages, width); int rc, i, j; const XenPhysmap *physmap = NULL; @@ -627,13 +631,14 @@ static void xen_sync_dirty_bitmap(XenIOState *state, if (state->log_for_dirtybit == NULL) { state->log_for_dirtybit = physmap; + state->dirty_bitmap = g_new(unsigned long, bitmap_size); } else if (state->log_for_dirtybit != physmap) { /* Only one range for dirty bitmap can be tracked. */ return; } rc = xen_track_dirty_vram(xen_domid, start_addr >> TARGET_PAGE_BITS, - npages, bitmap); + npages, state->dirty_bitmap); if (rc < 0) { #ifndef ENODATA #define ENODATA ENOENT @@ -647,8 +652,8 @@ static void xen_sync_dirty_bitmap(XenIOState *state, return; } - for (i = 0; i < ARRAY_SIZE(bitmap); i++) { - unsigned long map = bitmap[i]; + for (i = 0; i < bitmap_size; i++) { + unsigned long map = state->dirty_bitmap[i]; while (map != 0) { j = ctzl(map); map &= ~(1ul << j); @@ -678,6 +683,8 @@ static void xen_log_stop(MemoryListener *listener, MemoryRegionSection *section, if (old & ~new & (1 << DIRTY_MEMORY_VGA)) { state->log_for_dirtybit = NULL; + g_free(state->dirty_bitmap); + state->dirty_bitmap = NULL; /* Disable dirty bit tracking */ xen_track_dirty_vram(xen_domid, 0, 0, NULL); } From 6e8d4593536a59832dbbecce540498f69b75b644 Mon Sep 17 00:00:00 2001 From: Anthony PERARD Date: Tue, 18 Jun 2019 12:23:40 +0100 Subject: [PATCH 6/8] xen: Drop includes of xen/hvm/params.h xen-mapcache.c doesn't needs params.h. xen-hvm.c uses defines available in params.h but so is xen_common.h which is included before. HVM_PARAM_* flags are only needed to make xc_hvm_param_{get,set} calls so including only xenctrl.h, which is where the definition the function is, should be enough. (xenctrl.h does include params.h) Signed-off-by: Anthony PERARD Reviewed-by: Paul Durrant Message-Id: <20190618112341.513-4-anthony.perard@citrix.com> --- hw/i386/xen/xen-hvm.c | 1 - hw/i386/xen/xen-mapcache.c | 2 -- 2 files changed, 3 deletions(-) diff --git a/hw/i386/xen/xen-hvm.c b/hw/i386/xen/xen-hvm.c index ed9c37c72d..469f1260a4 100644 --- a/hw/i386/xen/xen-hvm.c +++ b/hw/i386/xen/xen-hvm.c @@ -27,7 +27,6 @@ #include "exec/address-spaces.h" #include -#include #include //#define DEBUG_XEN_HVM diff --git a/hw/i386/xen/xen-mapcache.c b/hw/i386/xen/xen-mapcache.c index 254759f776..dc73c86c61 100644 --- a/hw/i386/xen/xen-mapcache.c +++ b/hw/i386/xen/xen-mapcache.c @@ -17,8 +17,6 @@ #include "hw/xen/xen-legacy-backend.h" #include "qemu/bitmap.h" -#include - #include "sysemu/xen-mapcache.h" #include "trace.h" From d1744bd3218daa820744c14572058491e4854399 Mon Sep 17 00:00:00 2001 From: Anthony PERARD Date: Fri, 21 Jun 2019 11:54:40 +0100 Subject: [PATCH 7/8] Revert xen/io/ring.h of "Clean up a few header guard symbols" MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This reverts changes to include/hw/xen/io/ring.h from commit 37677d7db39a3c250ad661d00fb7c3b59d047b1f. Following 37677d7db3 "Clean up a few header guard symbols", QEMU start to fail to build: In file included from ~/xen/tools/../tools/include/xen/io/blkif.h:31:0, from ~/xen/tools/qemu-xen-dir/hw/block/xen_blkif.h:5, from ~/xen/tools/qemu-xen-dir/hw/block/xen-block.c:22: ~/xen/tools/../tools/include/xen/io/ring.h:68:0: error: "__CONST_RING_SIZE" redefined [-Werror] #define __CONST_RING_SIZE(_s, _sz) \ In file included from ~/xen/tools/qemu-xen-dir/hw/block/xen_blkif.h:4:0, from ~/xen/tools/qemu-xen-dir/hw/block/xen-block.c:22: ~/xen/tools/qemu-xen-dir/include/hw/xen/io/ring.h:66:0: note: this is the location of the previous definition #define __CONST_RING_SIZE(_s, _sz) \ The issue is that some public xen headers have been imported (by f65eadb639 "xen: import ring.h from xen") but not all. With the change in the guards symbole, the ring.h header start to be imported twice. Signed-off-by: Anthony PERARD Reviewed-by: Daniel P. Berrangé Reviewed-by: Paul Durrant Message-Id: <20190621105441.3025-2-anthony.perard@citrix.com> --- include/hw/xen/io/ring.h | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/include/hw/xen/io/ring.h b/include/hw/xen/io/ring.h index 62abfd7a6e..1adacf09f9 100644 --- a/include/hw/xen/io/ring.h +++ b/include/hw/xen/io/ring.h @@ -24,8 +24,8 @@ * Tim Deegan and Andrew Warfield November 2004. */ -#ifndef XEN_PUBLIC_IO_RING_H -#define XEN_PUBLIC_IO_RING_H +#ifndef __XEN_PUBLIC_IO_RING_H__ +#define __XEN_PUBLIC_IO_RING_H__ /* * When #include'ing this header, you need to provide the following @@ -469,7 +469,7 @@ struct name##_data_intf { \ }; \ DEFINE_XEN_FLEX_RING(name) -#endif /* XEN_PUBLIC_IO_RING_H */ +#endif /* __XEN_PUBLIC_IO_RING_H__ */ /* * Local variables: From a3434a2d56aee3018f4a0f55c7e0f0cda11f3d9e Mon Sep 17 00:00:00 2001 From: Anthony PERARD Date: Fri, 21 Jun 2019 11:54:41 +0100 Subject: [PATCH 8/8] xen: Import other xen/io/*.h MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit A Xen public header have been imported into QEMU (by f65eadb639 "xen: import ring.h from xen"), but there are other header that depends on ring.h which come from the system when building QEMU. This patch resolves the issue of having headers from the system importing a different copie of ring.h. This patch is prompt by the build issue described in the previous patch: 'Revert xen/io/ring.h of "Clean up a few header guard symbols"' ring.h and the new imported headers are moved to "include/hw/xen/interface" as those describe interfaces with a guest. The imported headers are cleaned up a bit while importing them: some part of the file that QEMU doesn't use are removed (description of how to make hypercall in grant_table.h have been removed). Other cleanup: - xen-mapcache.c and xen-legacy-backend.c don't need grant_table.h. - xenfb.c doesn't need event_channel.h. Signed-off-by: Anthony PERARD Reviewed-by: Daniel P. Berrangé Reviewed-by: Paul Durrant Message-Id: <20190621105441.3025-3-anthony.perard@citrix.com> --- hw/9pfs/xen-9pfs.h | 4 +- hw/block/xen_blkif.h | 5 +- hw/char/xen_console.c | 2 +- hw/display/xenfb.c | 7 +- hw/net/xen_nic.c | 2 +- hw/usb/xen-usb.c | 3 +- hw/xen/xen-legacy-backend.c | 2 - include/hw/xen/interface/grant_table.h | 36 + include/hw/xen/interface/io/blkif.h | 712 +++++++++++++++ include/hw/xen/interface/io/console.h | 46 + include/hw/xen/interface/io/fbif.h | 156 ++++ include/hw/xen/interface/io/kbdif.h | 566 ++++++++++++ include/hw/xen/interface/io/netif.h | 1010 ++++++++++++++++++++++ include/hw/xen/interface/io/protocols.h | 42 + include/hw/xen/{ => interface}/io/ring.h | 0 include/hw/xen/interface/io/usbif.h | 254 ++++++ include/hw/xen/interface/io/xenbus.h | 70 ++ include/hw/xen/xen_common.h | 2 +- 18 files changed, 2903 insertions(+), 16 deletions(-) create mode 100644 include/hw/xen/interface/grant_table.h create mode 100644 include/hw/xen/interface/io/blkif.h create mode 100644 include/hw/xen/interface/io/console.h create mode 100644 include/hw/xen/interface/io/fbif.h create mode 100644 include/hw/xen/interface/io/kbdif.h create mode 100644 include/hw/xen/interface/io/netif.h create mode 100644 include/hw/xen/interface/io/protocols.h rename include/hw/xen/{ => interface}/io/ring.h (100%) create mode 100644 include/hw/xen/interface/io/usbif.h create mode 100644 include/hw/xen/interface/io/xenbus.h diff --git a/hw/9pfs/xen-9pfs.h b/hw/9pfs/xen-9pfs.h index fbdee3d843..241e2216a4 100644 --- a/hw/9pfs/xen-9pfs.h +++ b/hw/9pfs/xen-9pfs.h @@ -13,8 +13,8 @@ #ifndef HW_9PFS_XEN_9PFS_H #define HW_9PFS_XEN_9PFS_H -#include -#include "hw/xen/io/ring.h" +#include "hw/xen/interface/io/protocols.h" +#include "hw/xen/interface/io/ring.h" /* * Do not merge into xen-9p-backend.c: clang doesn't allow unused static diff --git a/hw/block/xen_blkif.h b/hw/block/xen_blkif.h index a353693ea0..99733529c1 100644 --- a/hw/block/xen_blkif.h +++ b/hw/block/xen_blkif.h @@ -1,9 +1,8 @@ #ifndef XEN_BLKIF_H #define XEN_BLKIF_H -#include "hw/xen/io/ring.h" -#include -#include +#include "hw/xen/interface/io/blkif.h" +#include "hw/xen/interface/io/protocols.h" /* * Not a real protocol. Used to generate ring structs which contain diff --git a/hw/char/xen_console.c b/hw/char/xen_console.c index 91f34ef06c..47e1092263 100644 --- a/hw/char/xen_console.c +++ b/hw/char/xen_console.c @@ -28,7 +28,7 @@ #include "chardev/char-fe.h" #include "hw/xen/xen-legacy-backend.h" -#include +#include "hw/xen/interface/io/console.h" struct buffer { uint8_t *data; diff --git a/hw/display/xenfb.c b/hw/display/xenfb.c index 6202f1150e..3c79913b31 100644 --- a/hw/display/xenfb.c +++ b/hw/display/xenfb.c @@ -32,10 +32,9 @@ #include "ui/console.h" #include "hw/xen/xen-legacy-backend.h" -#include -#include -#include -#include +#include "hw/xen/interface/io/fbif.h" +#include "hw/xen/interface/io/kbdif.h" +#include "hw/xen/interface/io/protocols.h" #include "trace.h" diff --git a/hw/net/xen_nic.c b/hw/net/xen_nic.c index 37cda8e4be..ffb3b5898d 100644 --- a/hw/net/xen_nic.c +++ b/hw/net/xen_nic.c @@ -30,7 +30,7 @@ #include "net/util.h" #include "hw/xen/xen-legacy-backend.h" -#include +#include "hw/xen/interface/io/netif.h" /* ------------------------------------------------------------- */ diff --git a/hw/usb/xen-usb.c b/hw/usb/xen-usb.c index b20d0cfadf..dfbb418e77 100644 --- a/hw/usb/xen-usb.c +++ b/hw/usb/xen-usb.c @@ -32,8 +32,7 @@ #include "qapi/qmp/qdict.h" #include "qapi/qmp/qstring.h" -#include "hw/xen/io/ring.h" -#include +#include "hw/xen/interface/io/usbif.h" /* * Check for required support of usbif.h: USBIF_SHORT_NOT_OK was the last diff --git a/hw/xen/xen-legacy-backend.c b/hw/xen/xen-legacy-backend.c index 36fd1e9b09..3715c94fa6 100644 --- a/hw/xen/xen-legacy-backend.c +++ b/hw/xen/xen-legacy-backend.c @@ -34,8 +34,6 @@ #include "hw/xen/xen_pvdev.h" #include "monitor/qdev.h" -#include - DeviceState *xen_sysdev; BusState *xen_sysbus; diff --git a/include/hw/xen/interface/grant_table.h b/include/hw/xen/interface/grant_table.h new file mode 100644 index 0000000000..2af0cbdde3 --- /dev/null +++ b/include/hw/xen/interface/grant_table.h @@ -0,0 +1,36 @@ +/****************************************************************************** + * grant_table.h + * + * Interface for granting foreign access to page frames, and receiving + * page-ownership transfers. + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to + * deal in the Software without restriction, including without limitation the + * rights to use, copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER + * DEALINGS IN THE SOFTWARE. + * + * Copyright (c) 2004, K A Fraser + */ + +#ifndef __XEN_PUBLIC_GRANT_TABLE_H__ +#define __XEN_PUBLIC_GRANT_TABLE_H__ + +/* + * Reference to a grant entry in a specified domain's grant table. + */ +typedef uint32_t grant_ref_t; + +#endif /* __XEN_PUBLIC_GRANT_TABLE_H__ */ diff --git a/include/hw/xen/interface/io/blkif.h b/include/hw/xen/interface/io/blkif.h new file mode 100644 index 0000000000..8b1be50ce8 --- /dev/null +++ b/include/hw/xen/interface/io/blkif.h @@ -0,0 +1,712 @@ +/****************************************************************************** + * blkif.h + * + * Unified block-device I/O interface for Xen guest OSes. + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to + * deal in the Software without restriction, including without limitation the + * rights to use, copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER + * DEALINGS IN THE SOFTWARE. + * + * Copyright (c) 2003-2004, Keir Fraser + * Copyright (c) 2012, Spectra Logic Corporation + */ + +#ifndef __XEN_PUBLIC_IO_BLKIF_H__ +#define __XEN_PUBLIC_IO_BLKIF_H__ + +#include "ring.h" +#include "../grant_table.h" + +/* + * Front->back notifications: When enqueuing a new request, sending a + * notification can be made conditional on req_event (i.e., the generic + * hold-off mechanism provided by the ring macros). Backends must set + * req_event appropriately (e.g., using RING_FINAL_CHECK_FOR_REQUESTS()). + * + * Back->front notifications: When enqueuing a new response, sending a + * notification can be made conditional on rsp_event (i.e., the generic + * hold-off mechanism provided by the ring macros). Frontends must set + * rsp_event appropriately (e.g., using RING_FINAL_CHECK_FOR_RESPONSES()). + */ + +#ifndef blkif_vdev_t +#define blkif_vdev_t uint16_t +#endif +#define blkif_sector_t uint64_t + +/* + * Feature and Parameter Negotiation + * ================================= + * The two halves of a Xen block driver utilize nodes within the XenStore to + * communicate capabilities and to negotiate operating parameters. This + * section enumerates these nodes which reside in the respective front and + * backend portions of the XenStore, following the XenBus convention. + * + * All data in the XenStore is stored as strings. Nodes specifying numeric + * values are encoded in decimal. Integer value ranges listed below are + * expressed as fixed sized integer types capable of storing the conversion + * of a properly formated node string, without loss of information. + * + * Any specified default value is in effect if the corresponding XenBus node + * is not present in the XenStore. + * + * XenStore nodes in sections marked "PRIVATE" are solely for use by the + * driver side whose XenBus tree contains them. + * + * XenStore nodes marked "DEPRECATED" in their notes section should only be + * used to provide interoperability with legacy implementations. + * + * See the XenBus state transition diagram below for details on when XenBus + * nodes must be published and when they can be queried. + * + ***************************************************************************** + * Backend XenBus Nodes + ***************************************************************************** + * + *------------------ Backend Device Identification (PRIVATE) ------------------ + * + * mode + * Values: "r" (read only), "w" (writable) + * + * The read or write access permissions to the backing store to be + * granted to the frontend. + * + * params + * Values: string + * + * A free formatted string providing sufficient information for the + * hotplug script to attach the device and provide a suitable + * handler (ie: a block device) for blkback to use. + * + * physical-device + * Values: "MAJOR:MINOR" + * Notes: 11 + * + * MAJOR and MINOR are the major number and minor number of the + * backing device respectively. + * + * physical-device-path + * Values: path string + * + * A string that contains the absolute path to the disk image. On + * NetBSD and Linux this is always a block device, while on FreeBSD + * it can be either a block device or a regular file. + * + * type + * Values: "file", "phy", "tap" + * + * The type of the backing device/object. + * + * + * direct-io-safe + * Values: 0/1 (boolean) + * Default Value: 0 + * + * The underlying storage is not affected by the direct IO memory + * lifetime bug. See: + * http://lists.xen.org/archives/html/xen-devel/2012-12/msg01154.html + * + * Therefore this option gives the backend permission to use + * O_DIRECT, notwithstanding that bug. + * + * That is, if this option is enabled, use of O_DIRECT is safe, + * in circumstances where we would normally have avoided it as a + * workaround for that bug. This option is not relevant for all + * backends, and even not necessarily supported for those for + * which it is relevant. A backend which knows that it is not + * affected by the bug can ignore this option. + * + * This option doesn't require a backend to use O_DIRECT, so it + * should not be used to try to control the caching behaviour. + * + *--------------------------------- Features --------------------------------- + * + * feature-barrier + * Values: 0/1 (boolean) + * Default Value: 0 + * + * A value of "1" indicates that the backend can process requests + * containing the BLKIF_OP_WRITE_BARRIER request opcode. Requests + * of this type may still be returned at any time with the + * BLKIF_RSP_EOPNOTSUPP result code. + * + * feature-flush-cache + * Values: 0/1 (boolean) + * Default Value: 0 + * + * A value of "1" indicates that the backend can process requests + * containing the BLKIF_OP_FLUSH_DISKCACHE request opcode. Requests + * of this type may still be returned at any time with the + * BLKIF_RSP_EOPNOTSUPP result code. + * + * feature-discard + * Values: 0/1 (boolean) + * Default Value: 0 + * + * A value of "1" indicates that the backend can process requests + * containing the BLKIF_OP_DISCARD request opcode. Requests + * of this type may still be returned at any time with the + * BLKIF_RSP_EOPNOTSUPP result code. + * + * feature-persistent + * Values: 0/1 (boolean) + * Default Value: 0 + * Notes: 7 + * + * A value of "1" indicates that the backend can keep the grants used + * by the frontend driver mapped, so the same set of grants should be + * used in all transactions. The maximum number of grants the backend + * can map persistently depends on the implementation, but ideally it + * should be RING_SIZE * BLKIF_MAX_SEGMENTS_PER_REQUEST. Using this + * feature the backend doesn't need to unmap each grant, preventing + * costly TLB flushes. The backend driver should only map grants + * persistently if the frontend supports it. If a backend driver chooses + * to use the persistent protocol when the frontend doesn't support it, + * it will probably hit the maximum number of persistently mapped grants + * (due to the fact that the frontend won't be reusing the same grants), + * and fall back to non-persistent mode. Backend implementations may + * shrink or expand the number of persistently mapped grants without + * notifying the frontend depending on memory constraints (this might + * cause a performance degradation). + * + * If a backend driver wants to limit the maximum number of persistently + * mapped grants to a value less than RING_SIZE * + * BLKIF_MAX_SEGMENTS_PER_REQUEST a LRU strategy should be used to + * discard the grants that are less commonly used. Using a LRU in the + * backend driver paired with a LIFO queue in the frontend will + * allow us to have better performance in this scenario. + * + *----------------------- Request Transport Parameters ------------------------ + * + * max-ring-page-order + * Values: + * Default Value: 0 + * Notes: 1, 3 + * + * The maximum supported size of the request ring buffer in units of + * lb(machine pages). (e.g. 0 == 1 page, 1 = 2 pages, 2 == 4 pages, + * etc.). + * + * max-ring-pages + * Values: + * Default Value: 1 + * Notes: DEPRECATED, 2, 3 + * + * The maximum supported size of the request ring buffer in units of + * machine pages. The value must be a power of 2. + * + *------------------------- Backend Device Properties ------------------------- + * + * discard-enable + * Values: 0/1 (boolean) + * Default Value: 1 + * + * This optional property, set by the toolstack, instructs the backend + * to offer (or not to offer) discard to the frontend. If the property + * is missing the backend should offer discard if the backing storage + * actually supports it. + * + * discard-alignment + * Values: + * Default Value: 0 + * Notes: 4, 5 + * + * The offset, in bytes from the beginning of the virtual block device, + * to the first, addressable, discard extent on the underlying device. + * + * discard-granularity + * Values: + * Default Value: <"sector-size"> + * Notes: 4 + * + * The size, in bytes, of the individually addressable discard extents + * of the underlying device. + * + * discard-secure + * Values: 0/1 (boolean) + * Default Value: 0 + * Notes: 10 + * + * A value of "1" indicates that the backend can process BLKIF_OP_DISCARD + * requests with the BLKIF_DISCARD_SECURE flag set. + * + * info + * Values: (bitmap) + * + * A collection of bit flags describing attributes of the backing + * device. The VDISK_* macros define the meaning of each bit + * location. + * + * sector-size + * Values: + * + * The logical block size, in bytes, of the underlying storage. This + * must be a power of two with a minimum value of 512. + * + * NOTE: Because of implementation bugs in some frontends this must be + * set to 512, unless the frontend advertizes a non-zero value + * in its "feature-large-sector-size" xenbus node. (See below). + * + * physical-sector-size + * Values: + * Default Value: <"sector-size"> + * + * The physical block size, in bytes, of the backend storage. This + * must be an integer multiple of "sector-size". + * + * sectors + * Values: + * + * The size of the backend device, expressed in units of "sector-size". + * The product of "sector-size" and "sectors" must also be an integer + * multiple of "physical-sector-size", if that node is present. + * + ***************************************************************************** + * Frontend XenBus Nodes + ***************************************************************************** + * + *----------------------- Request Transport Parameters ----------------------- + * + * event-channel + * Values: + * + * The identifier of the Xen event channel used to signal activity + * in the ring buffer. + * + * ring-ref + * Values: + * Notes: 6 + * + * The Xen grant reference granting permission for the backend to map + * the sole page in a single page sized ring buffer. + * + * ring-ref%u + * Values: + * Notes: 6 + * + * For a frontend providing a multi-page ring, a "number of ring pages" + * sized list of nodes, each containing a Xen grant reference granting + * permission for the backend to map the page of the ring located + * at page index "%u". Page indexes are zero based. + * + * protocol + * Values: string (XEN_IO_PROTO_ABI_*) + * Default Value: XEN_IO_PROTO_ABI_NATIVE + * + * The machine ABI rules governing the format of all ring request and + * response structures. + * + * ring-page-order + * Values: + * Default Value: 0 + * Maximum Value: MAX(ffs(max-ring-pages) - 1, max-ring-page-order) + * Notes: 1, 3 + * + * The size of the frontend allocated request ring buffer in units + * of lb(machine pages). (e.g. 0 == 1 page, 1 = 2 pages, 2 == 4 pages, + * etc.). + * + * num-ring-pages + * Values: + * Default Value: 1 + * Maximum Value: MAX(max-ring-pages,(0x1 << max-ring-page-order)) + * Notes: DEPRECATED, 2, 3 + * + * The size of the frontend allocated request ring buffer in units of + * machine pages. The value must be a power of 2. + * + *--------------------------------- Features --------------------------------- + * + * feature-persistent + * Values: 0/1 (boolean) + * Default Value: 0 + * Notes: 7, 8, 9 + * + * A value of "1" indicates that the frontend will reuse the same grants + * for all transactions, allowing the backend to map them with write + * access (even when it should be read-only). If the frontend hits the + * maximum number of allowed persistently mapped grants, it can fallback + * to non persistent mode. This will cause a performance degradation, + * since the the backend driver will still try to map those grants + * persistently. Since the persistent grants protocol is compatible with + * the previous protocol, a frontend driver can choose to work in + * persistent mode even when the backend doesn't support it. + * + * It is recommended that the frontend driver stores the persistently + * mapped grants in a LIFO queue, so a subset of all persistently mapped + * grants gets used commonly. This is done in case the backend driver + * decides to limit the maximum number of persistently mapped grants + * to a value less than RING_SIZE * BLKIF_MAX_SEGMENTS_PER_REQUEST. + * + * feature-large-sector-size + * Values: 0/1 (boolean) + * Default Value: 0 + * + * A value of "1" indicates that the frontend will correctly supply and + * interpret all sector-based quantities in terms of the "sector-size" + * value supplied in the backend info, whatever that may be set to. + * If this node is not present or its value is "0" then it is assumed + * that the frontend requires that the logical block size is 512 as it + * is hardcoded (which is the case in some frontend implementations). + * + *------------------------- Virtual Device Properties ------------------------- + * + * device-type + * Values: "disk", "cdrom", "floppy", etc. + * + * virtual-device + * Values: + * + * A value indicating the physical device to virtualize within the + * frontend's domain. (e.g. "The first ATA disk", "The third SCSI + * disk", etc.) + * + * See docs/misc/vbd-interface.txt for details on the format of this + * value. + * + * Notes + * ----- + * (1) Multi-page ring buffer scheme first developed in the Citrix XenServer + * PV drivers. + * (2) Multi-page ring buffer scheme first used in some RedHat distributions + * including a distribution deployed on certain nodes of the Amazon + * EC2 cluster. + * (3) Support for multi-page ring buffers was implemented independently, + * in slightly different forms, by both Citrix and RedHat/Amazon. + * For full interoperability, block front and backends should publish + * identical ring parameters, adjusted for unit differences, to the + * XenStore nodes used in both schemes. + * (4) Devices that support discard functionality may internally allocate space + * (discardable extents) in units that are larger than the exported logical + * block size. If the backing device has such discardable extents the + * backend should provide both discard-granularity and discard-alignment. + * Providing just one of the two may be considered an error by the frontend. + * Backends supporting discard should include discard-granularity and + * discard-alignment even if it supports discarding individual sectors. + * Frontends should assume discard-alignment == 0 and discard-granularity + * == sector size if these keys are missing. + * (5) The discard-alignment parameter allows a physical device to be + * partitioned into virtual devices that do not necessarily begin or + * end on a discardable extent boundary. + * (6) When there is only a single page allocated to the request ring, + * 'ring-ref' is used to communicate the grant reference for this + * page to the backend. When using a multi-page ring, the 'ring-ref' + * node is not created. Instead 'ring-ref0' - 'ring-refN' are used. + * (7) When using persistent grants data has to be copied from/to the page + * where the grant is currently mapped. The overhead of doing this copy + * however doesn't suppress the speed improvement of not having to unmap + * the grants. + * (8) The frontend driver has to allow the backend driver to map all grants + * with write access, even when they should be mapped read-only, since + * further requests may reuse these grants and require write permissions. + * (9) Linux implementation doesn't have a limit on the maximum number of + * grants that can be persistently mapped in the frontend driver, but + * due to the frontent driver implementation it should never be bigger + * than RING_SIZE * BLKIF_MAX_SEGMENTS_PER_REQUEST. + *(10) The discard-secure property may be present and will be set to 1 if the + * backing device supports secure discard. + *(11) Only used by Linux and NetBSD. + */ + +/* + * Multiple hardware queues/rings: + * If supported, the backend will write the key "multi-queue-max-queues" to + * the directory for that vbd, and set its value to the maximum supported + * number of queues. + * Frontends that are aware of this feature and wish to use it can write the + * key "multi-queue-num-queues" with the number they wish to use, which must be + * greater than zero, and no more than the value reported by the backend in + * "multi-queue-max-queues". + * + * For frontends requesting just one queue, the usual event-channel and + * ring-ref keys are written as before, simplifying the backend processing + * to avoid distinguishing between a frontend that doesn't understand the + * multi-queue feature, and one that does, but requested only one queue. + * + * Frontends requesting two or more queues must not write the toplevel + * event-channel and ring-ref keys, instead writing those keys under sub-keys + * having the name "queue-N" where N is the integer ID of the queue/ring for + * which those keys belong. Queues are indexed from zero. + * For example, a frontend with two queues must write the following set of + * queue-related keys: + * + * /local/domain/1/device/vbd/0/multi-queue-num-queues = "2" + * /local/domain/1/device/vbd/0/queue-0 = "" + * /local/domain/1/device/vbd/0/queue-0/ring-ref = "" + * /local/domain/1/device/vbd/0/queue-0/event-channel = "" + * /local/domain/1/device/vbd/0/queue-1 = "" + * /local/domain/1/device/vbd/0/queue-1/ring-ref = "" + * /local/domain/1/device/vbd/0/queue-1/event-channel = "" + * + * It is also possible to use multiple queues/rings together with + * feature multi-page ring buffer. + * For example, a frontend requests two queues/rings and the size of each ring + * buffer is two pages must write the following set of related keys: + * + * /local/domain/1/device/vbd/0/multi-queue-num-queues = "2" + * /local/domain/1/device/vbd/0/ring-page-order = "1" + * /local/domain/1/device/vbd/0/queue-0 = "" + * /local/domain/1/device/vbd/0/queue-0/ring-ref0 = "" + * /local/domain/1/device/vbd/0/queue-0/ring-ref1 = "" + * /local/domain/1/device/vbd/0/queue-0/event-channel = "" + * /local/domain/1/device/vbd/0/queue-1 = "" + * /local/domain/1/device/vbd/0/queue-1/ring-ref0 = "" + * /local/domain/1/device/vbd/0/queue-1/ring-ref1 = "" + * /local/domain/1/device/vbd/0/queue-1/event-channel = "" + * + */ + +/* + * STATE DIAGRAMS + * + ***************************************************************************** + * Startup * + ***************************************************************************** + * + * Tool stack creates front and back nodes with state XenbusStateInitialising. + * + * Front Back + * ================================= ===================================== + * XenbusStateInitialising XenbusStateInitialising + * o Query virtual device o Query backend device identification + * properties. data. + * o Setup OS device instance. o Open and validate backend device. + * o Publish backend features and + * transport parameters. + * | + * | + * V + * XenbusStateInitWait + * + * o Query backend features and + * transport parameters. + * o Allocate and initialize the + * request ring. + * o Publish transport parameters + * that will be in effect during + * this connection. + * | + * | + * V + * XenbusStateInitialised + * + * o Query frontend transport parameters. + * o Connect to the request ring and + * event channel. + * o Publish backend device properties. + * | + * | + * V + * XenbusStateConnected + * + * o Query backend device properties. + * o Finalize OS virtual device + * instance. + * | + * | + * V + * XenbusStateConnected + * + * Note: Drivers that do not support any optional features, or the negotiation + * of transport parameters, can skip certain states in the state machine: + * + * o A frontend may transition to XenbusStateInitialised without + * waiting for the backend to enter XenbusStateInitWait. In this + * case, default transport parameters are in effect and any + * transport parameters published by the frontend must contain + * their default values. + * + * o A backend may transition to XenbusStateInitialised, bypassing + * XenbusStateInitWait, without waiting for the frontend to first + * enter the XenbusStateInitialised state. In this case, default + * transport parameters are in effect and any transport parameters + * published by the backend must contain their default values. + * + * Drivers that support optional features and/or transport parameter + * negotiation must tolerate these additional state transition paths. + * In general this means performing the work of any skipped state + * transition, if it has not already been performed, in addition to the + * work associated with entry into the current state. + */ + +/* + * REQUEST CODES. + */ +#define BLKIF_OP_READ 0 +#define BLKIF_OP_WRITE 1 +/* + * All writes issued prior to a request with the BLKIF_OP_WRITE_BARRIER + * operation code ("barrier request") must be completed prior to the + * execution of the barrier request. All writes issued after the barrier + * request must not execute until after the completion of the barrier request. + * + * Optional. See "feature-barrier" XenBus node documentation above. + */ +#define BLKIF_OP_WRITE_BARRIER 2 +/* + * Commit any uncommitted contents of the backing device's volatile cache + * to stable storage. + * + * Optional. See "feature-flush-cache" XenBus node documentation above. + */ +#define BLKIF_OP_FLUSH_DISKCACHE 3 +/* + * Used in SLES sources for device specific command packet + * contained within the request. Reserved for that purpose. + */ +#define BLKIF_OP_RESERVED_1 4 +/* + * Indicate to the backend device that a region of storage is no longer in + * use, and may be discarded at any time without impact to the client. If + * the BLKIF_DISCARD_SECURE flag is set on the request, all copies of the + * discarded region on the device must be rendered unrecoverable before the + * command returns. + * + * This operation is analogous to performing a trim (ATA) or unamp (SCSI), + * command on a native device. + * + * More information about trim/unmap operations can be found at: + * http://t13.org/Documents/UploadedDocuments/docs2008/ + * e07154r6-Data_Set_Management_Proposal_for_ATA-ACS2.doc + * http://www.seagate.com/staticfiles/support/disc/manuals/ + * Interface%20manuals/100293068c.pdf + * + * Optional. See "feature-discard", "discard-alignment", + * "discard-granularity", and "discard-secure" in the XenBus node + * documentation above. + */ +#define BLKIF_OP_DISCARD 5 + +/* + * Recognized if "feature-max-indirect-segments" in present in the backend + * xenbus info. The "feature-max-indirect-segments" node contains the maximum + * number of segments allowed by the backend per request. If the node is + * present, the frontend might use blkif_request_indirect structs in order to + * issue requests with more than BLKIF_MAX_SEGMENTS_PER_REQUEST (11). The + * maximum number of indirect segments is fixed by the backend, but the + * frontend can issue requests with any number of indirect segments as long as + * it's less than the number provided by the backend. The indirect_grefs field + * in blkif_request_indirect should be filled by the frontend with the + * grant references of the pages that are holding the indirect segments. + * These pages are filled with an array of blkif_request_segment that hold the + * information about the segments. The number of indirect pages to use is + * determined by the number of segments an indirect request contains. Every + * indirect page can contain a maximum of + * (PAGE_SIZE / sizeof(struct blkif_request_segment)) segments, so to + * calculate the number of indirect pages to use we have to do + * ceil(indirect_segments / (PAGE_SIZE / sizeof(struct blkif_request_segment))). + * + * If a backend does not recognize BLKIF_OP_INDIRECT, it should *not* + * create the "feature-max-indirect-segments" node! + */ +#define BLKIF_OP_INDIRECT 6 + +/* + * Maximum scatter/gather segments per request. + * This is carefully chosen so that sizeof(blkif_ring_t) <= PAGE_SIZE. + * NB. This could be 12 if the ring indexes weren't stored in the same page. + */ +#define BLKIF_MAX_SEGMENTS_PER_REQUEST 11 + +/* + * Maximum number of indirect pages to use per request. + */ +#define BLKIF_MAX_INDIRECT_PAGES_PER_REQUEST 8 + +/* + * NB. 'first_sect' and 'last_sect' in blkif_request_segment, as well as + * 'sector_number' in blkif_request, blkif_request_discard and + * blkif_request_indirect are sector-based quantities. See the description + * of the "feature-large-sector-size" frontend xenbus node above for + * more information. + */ +struct blkif_request_segment { + grant_ref_t gref; /* reference to I/O buffer frame */ + /* @first_sect: first sector in frame to transfer (inclusive). */ + /* @last_sect: last sector in frame to transfer (inclusive). */ + uint8_t first_sect, last_sect; +}; + +/* + * Starting ring element for any I/O request. + */ +struct blkif_request { + uint8_t operation; /* BLKIF_OP_??? */ + uint8_t nr_segments; /* number of segments */ + blkif_vdev_t handle; /* only for read/write requests */ + uint64_t id; /* private guest value, echoed in resp */ + blkif_sector_t sector_number;/* start sector idx on disk (r/w only) */ + struct blkif_request_segment seg[BLKIF_MAX_SEGMENTS_PER_REQUEST]; +}; +typedef struct blkif_request blkif_request_t; + +/* + * Cast to this structure when blkif_request.operation == BLKIF_OP_DISCARD + * sizeof(struct blkif_request_discard) <= sizeof(struct blkif_request) + */ +struct blkif_request_discard { + uint8_t operation; /* BLKIF_OP_DISCARD */ + uint8_t flag; /* BLKIF_DISCARD_SECURE or zero */ +#define BLKIF_DISCARD_SECURE (1<<0) /* ignored if discard-secure=0 */ + blkif_vdev_t handle; /* same as for read/write requests */ + uint64_t id; /* private guest value, echoed in resp */ + blkif_sector_t sector_number;/* start sector idx on disk */ + uint64_t nr_sectors; /* number of contiguous sectors to discard*/ +}; +typedef struct blkif_request_discard blkif_request_discard_t; + +struct blkif_request_indirect { + uint8_t operation; /* BLKIF_OP_INDIRECT */ + uint8_t indirect_op; /* BLKIF_OP_{READ/WRITE} */ + uint16_t nr_segments; /* number of segments */ + uint64_t id; /* private guest value, echoed in resp */ + blkif_sector_t sector_number;/* start sector idx on disk (r/w only) */ + blkif_vdev_t handle; /* same as for read/write requests */ + grant_ref_t indirect_grefs[BLKIF_MAX_INDIRECT_PAGES_PER_REQUEST]; +#ifdef __i386__ + uint64_t pad; /* Make it 64 byte aligned on i386 */ +#endif +}; +typedef struct blkif_request_indirect blkif_request_indirect_t; + +struct blkif_response { + uint64_t id; /* copied from request */ + uint8_t operation; /* copied from request */ + int16_t status; /* BLKIF_RSP_??? */ +}; +typedef struct blkif_response blkif_response_t; + +/* + * STATUS RETURN CODES. + */ + /* Operation not supported (only happens on barrier writes). */ +#define BLKIF_RSP_EOPNOTSUPP -2 + /* Operation failed for some unspecified reason (-EIO). */ +#define BLKIF_RSP_ERROR -1 + /* Operation completed successfully. */ +#define BLKIF_RSP_OKAY 0 + +/* + * Generate blkif ring structures and types. + */ +DEFINE_RING_TYPES(blkif, struct blkif_request, struct blkif_response); + +#define VDISK_CDROM 0x1 +#define VDISK_REMOVABLE 0x2 +#define VDISK_READONLY 0x4 + +#endif /* __XEN_PUBLIC_IO_BLKIF_H__ */ diff --git a/include/hw/xen/interface/io/console.h b/include/hw/xen/interface/io/console.h new file mode 100644 index 0000000000..e2155d1cf5 --- /dev/null +++ b/include/hw/xen/interface/io/console.h @@ -0,0 +1,46 @@ +/****************************************************************************** + * console.h + * + * Console I/O interface for Xen guest OSes. + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to + * deal in the Software without restriction, including without limitation the + * rights to use, copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER + * DEALINGS IN THE SOFTWARE. + * + * Copyright (c) 2005, Keir Fraser + */ + +#ifndef __XEN_PUBLIC_IO_CONSOLE_H__ +#define __XEN_PUBLIC_IO_CONSOLE_H__ + +typedef uint32_t XENCONS_RING_IDX; + +#define MASK_XENCONS_IDX(idx, ring) ((idx) & (sizeof(ring)-1)) + +struct xencons_interface { + char in[1024]; + char out[2048]; + XENCONS_RING_IDX in_cons, in_prod; + XENCONS_RING_IDX out_cons, out_prod; +}; + +#ifdef XEN_WANT_FLEX_CONSOLE_RING +#include "ring.h" +DEFINE_XEN_FLEX_RING(xencons); +#endif + +#endif /* __XEN_PUBLIC_IO_CONSOLE_H__ */ diff --git a/include/hw/xen/interface/io/fbif.h b/include/hw/xen/interface/io/fbif.h new file mode 100644 index 0000000000..ea87ebec0a --- /dev/null +++ b/include/hw/xen/interface/io/fbif.h @@ -0,0 +1,156 @@ +/* + * fbif.h -- Xen virtual frame buffer device + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to + * deal in the Software without restriction, including without limitation the + * rights to use, copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER + * DEALINGS IN THE SOFTWARE. + * + * Copyright (C) 2005 Anthony Liguori + * Copyright (C) 2006 Red Hat, Inc., Markus Armbruster + */ + +#ifndef __XEN_PUBLIC_IO_FBIF_H__ +#define __XEN_PUBLIC_IO_FBIF_H__ + +/* Out events (frontend -> backend) */ + +/* + * Out events may be sent only when requested by backend, and receipt + * of an unknown out event is an error. + */ + +/* Event type 1 currently not used */ +/* + * Framebuffer update notification event + * Capable frontend sets feature-update in xenstore. + * Backend requests it by setting request-update in xenstore. + */ +#define XENFB_TYPE_UPDATE 2 + +struct xenfb_update +{ + uint8_t type; /* XENFB_TYPE_UPDATE */ + int32_t x; /* source x */ + int32_t y; /* source y */ + int32_t width; /* rect width */ + int32_t height; /* rect height */ +}; + +/* + * Framebuffer resize notification event + * Capable backend sets feature-resize in xenstore. + */ +#define XENFB_TYPE_RESIZE 3 + +struct xenfb_resize +{ + uint8_t type; /* XENFB_TYPE_RESIZE */ + int32_t width; /* width in pixels */ + int32_t height; /* height in pixels */ + int32_t stride; /* stride in bytes */ + int32_t depth; /* depth in bits */ + int32_t offset; /* offset of the framebuffer in bytes */ +}; + +#define XENFB_OUT_EVENT_SIZE 40 + +union xenfb_out_event +{ + uint8_t type; + struct xenfb_update update; + struct xenfb_resize resize; + char pad[XENFB_OUT_EVENT_SIZE]; +}; + +/* In events (backend -> frontend) */ + +/* + * Frontends should ignore unknown in events. + */ + +/* + * Framebuffer refresh period advice + * Backend sends it to advise the frontend their preferred period of + * refresh. Frontends that keep the framebuffer constantly up-to-date + * just ignore it. Frontends that use the advice should immediately + * refresh the framebuffer (and send an update notification event if + * those have been requested), then use the update frequency to guide + * their periodical refreshs. + */ +#define XENFB_TYPE_REFRESH_PERIOD 1 +#define XENFB_NO_REFRESH 0 + +struct xenfb_refresh_period +{ + uint8_t type; /* XENFB_TYPE_UPDATE_PERIOD */ + uint32_t period; /* period of refresh, in ms, + * XENFB_NO_REFRESH if no refresh is needed */ +}; + +#define XENFB_IN_EVENT_SIZE 40 + +union xenfb_in_event +{ + uint8_t type; + struct xenfb_refresh_period refresh_period; + char pad[XENFB_IN_EVENT_SIZE]; +}; + +/* shared page */ + +#define XENFB_IN_RING_SIZE 1024 +#define XENFB_IN_RING_LEN (XENFB_IN_RING_SIZE / XENFB_IN_EVENT_SIZE) +#define XENFB_IN_RING_OFFS 1024 +#define XENFB_IN_RING(page) \ + ((union xenfb_in_event *)((char *)(page) + XENFB_IN_RING_OFFS)) +#define XENFB_IN_RING_REF(page, idx) \ + (XENFB_IN_RING((page))[(idx) % XENFB_IN_RING_LEN]) + +#define XENFB_OUT_RING_SIZE 2048 +#define XENFB_OUT_RING_LEN (XENFB_OUT_RING_SIZE / XENFB_OUT_EVENT_SIZE) +#define XENFB_OUT_RING_OFFS (XENFB_IN_RING_OFFS + XENFB_IN_RING_SIZE) +#define XENFB_OUT_RING(page) \ + ((union xenfb_out_event *)((char *)(page) + XENFB_OUT_RING_OFFS)) +#define XENFB_OUT_RING_REF(page, idx) \ + (XENFB_OUT_RING((page))[(idx) % XENFB_OUT_RING_LEN]) + +struct xenfb_page +{ + uint32_t in_cons, in_prod; + uint32_t out_cons, out_prod; + + int32_t width; /* the width of the framebuffer (in pixels) */ + int32_t height; /* the height of the framebuffer (in pixels) */ + uint32_t line_length; /* the length of a row of pixels (in bytes) */ + uint32_t mem_length; /* the length of the framebuffer (in bytes) */ + uint8_t depth; /* the depth of a pixel (in bits) */ + + /* + * Framebuffer page directory + * + * Each directory page holds PAGE_SIZE / sizeof(*pd) + * framebuffer pages, and can thus map up to PAGE_SIZE * + * PAGE_SIZE / sizeof(*pd) bytes. With PAGE_SIZE == 4096 and + * sizeof(unsigned long) == 4/8, that's 4 Megs 32 bit and 2 Megs + * 64 bit. 256 directories give enough room for a 512 Meg + * framebuffer with a max resolution of 12,800x10,240. Should + * be enough for a while with room leftover for expansion. + */ + unsigned long pd[256]; +}; + +#endif diff --git a/include/hw/xen/interface/io/kbdif.h b/include/hw/xen/interface/io/kbdif.h new file mode 100644 index 0000000000..1d68cd458e --- /dev/null +++ b/include/hw/xen/interface/io/kbdif.h @@ -0,0 +1,566 @@ +/* + * kbdif.h -- Xen virtual keyboard/mouse + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to + * deal in the Software without restriction, including without limitation the + * rights to use, copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER + * DEALINGS IN THE SOFTWARE. + * + * Copyright (C) 2005 Anthony Liguori + * Copyright (C) 2006 Red Hat, Inc., Markus Armbruster + */ + +#ifndef __XEN_PUBLIC_IO_KBDIF_H__ +#define __XEN_PUBLIC_IO_KBDIF_H__ + +/* + ***************************************************************************** + * Feature and Parameter Negotiation + ***************************************************************************** + * + * The two halves of a para-virtual driver utilize nodes within + * XenStore to communicate capabilities and to negotiate operating parameters. + * This section enumerates these nodes which reside in the respective front and + * backend portions of XenStore, following XenBus convention. + * + * All data in XenStore is stored as strings. Nodes specifying numeric + * values are encoded in decimal. Integer value ranges listed below are + * expressed as fixed sized integer types capable of storing the conversion + * of a properly formated node string, without loss of information. + * + ***************************************************************************** + * Backend XenBus Nodes + ***************************************************************************** + * + *---------------------------- Features supported ---------------------------- + * + * Capable backend advertises supported features by publishing + * corresponding entries in XenStore and puts 1 as the value of the entry. + * If a feature is not supported then 0 must be set or feature entry omitted. + * + * feature-disable-keyboard + * Values: + * + * If there is no need to expose a virtual keyboard device by the + * frontend then this must be set to 1. + * + * feature-disable-pointer + * Values: + * + * If there is no need to expose a virtual pointer device by the + * frontend then this must be set to 1. + * + * feature-abs-pointer + * Values: + * + * Backends, which support reporting of absolute coordinates for pointer + * device should set this to 1. + * + * feature-multi-touch + * Values: + * + * Backends, which support reporting of multi-touch events + * should set this to 1. + * + * feature-raw-pointer + * Values: + * + * Backends, which support reporting raw (unscaled) absolute coordinates + * for pointer devices should set this to 1. Raw (unscaled) values have + * a range of [0, 0x7fff]. + * + *----------------------- Device Instance Parameters ------------------------ + * + * unique-id + * Values: + * + * After device instance initialization it is assigned a unique ID, + * so every instance of the frontend can be identified by the backend + * by this ID. This can be UUID or such. + * + *------------------------- Pointer Device Parameters ------------------------ + * + * width + * Values: + * + * Maximum X coordinate (width) to be used by the frontend + * while reporting input events, pixels, [0; UINT32_MAX]. + * + * height + * Values: + * + * Maximum Y coordinate (height) to be used by the frontend + * while reporting input events, pixels, [0; UINT32_MAX]. + * + *----------------------- Multi-touch Device Parameters ---------------------- + * + * multi-touch-num-contacts + * Values: + * + * Number of simultaneous touches reported. + * + * multi-touch-width + * Values: + * + * Width of the touch area to be used by the frontend + * while reporting input events, pixels, [0; UINT32_MAX]. + * + * multi-touch-height + * Values: + * + * Height of the touch area to be used by the frontend + * while reporting input events, pixels, [0; UINT32_MAX]. + * + ***************************************************************************** + * Frontend XenBus Nodes + ***************************************************************************** + * + *------------------------------ Feature request ----------------------------- + * + * Capable frontend requests features from backend via setting corresponding + * entries to 1 in XenStore. Requests for features not advertised as supported + * by the backend have no effect. + * + * request-abs-pointer + * Values: + * + * Request backend to report absolute pointer coordinates + * (XENKBD_TYPE_POS) instead of relative ones (XENKBD_TYPE_MOTION). + * + * request-multi-touch + * Values: + * + * Request backend to report multi-touch events. + * + * request-raw-pointer + * Values: + * + * Request backend to report raw unscaled absolute pointer coordinates. + * This option is only valid if request-abs-pointer is also set. + * Raw unscaled coordinates have the range [0, 0x7fff] + * + *----------------------- Request Transport Parameters ----------------------- + * + * event-channel + * Values: + * + * The identifier of the Xen event channel used to signal activity + * in the ring buffer. + * + * page-gref + * Values: + * + * The Xen grant reference granting permission for the backend to map + * a sole page in a single page sized event ring buffer. + * + * page-ref + * Values: + * + * OBSOLETE, not recommended for use. + * PFN of the shared page. + */ + +/* + * EVENT CODES. + */ + +#define XENKBD_TYPE_MOTION 1 +#define XENKBD_TYPE_RESERVED 2 +#define XENKBD_TYPE_KEY 3 +#define XENKBD_TYPE_POS 4 +#define XENKBD_TYPE_MTOUCH 5 + +/* Multi-touch event sub-codes */ + +#define XENKBD_MT_EV_DOWN 0 +#define XENKBD_MT_EV_UP 1 +#define XENKBD_MT_EV_MOTION 2 +#define XENKBD_MT_EV_SYN 3 +#define XENKBD_MT_EV_SHAPE 4 +#define XENKBD_MT_EV_ORIENT 5 + +/* + * CONSTANTS, XENSTORE FIELD AND PATH NAME STRINGS, HELPERS. + */ + +#define XENKBD_DRIVER_NAME "vkbd" + +#define XENKBD_FIELD_FEAT_DSBL_KEYBRD "feature-disable-keyboard" +#define XENKBD_FIELD_FEAT_DSBL_POINTER "feature-disable-pointer" +#define XENKBD_FIELD_FEAT_ABS_POINTER "feature-abs-pointer" +#define XENKBD_FIELD_FEAT_RAW_POINTER "feature-raw-pointer" +#define XENKBD_FIELD_FEAT_MTOUCH "feature-multi-touch" +#define XENKBD_FIELD_REQ_ABS_POINTER "request-abs-pointer" +#define XENKBD_FIELD_REQ_RAW_POINTER "request-raw-pointer" +#define XENKBD_FIELD_REQ_MTOUCH "request-multi-touch" +#define XENKBD_FIELD_RING_GREF "page-gref" +#define XENKBD_FIELD_EVT_CHANNEL "event-channel" +#define XENKBD_FIELD_WIDTH "width" +#define XENKBD_FIELD_HEIGHT "height" +#define XENKBD_FIELD_MT_WIDTH "multi-touch-width" +#define XENKBD_FIELD_MT_HEIGHT "multi-touch-height" +#define XENKBD_FIELD_MT_NUM_CONTACTS "multi-touch-num-contacts" +#define XENKBD_FIELD_UNIQUE_ID "unique-id" + +/* OBSOLETE, not recommended for use */ +#define XENKBD_FIELD_RING_REF "page-ref" + +/* + ***************************************************************************** + * Description of the protocol between frontend and backend driver. + ***************************************************************************** + * + * The two halves of a Para-virtual driver communicate with + * each other using a shared page and an event channel. + * Shared page contains a ring with event structures. + * + * All reserved fields in the structures below must be 0. + * + ***************************************************************************** + * Backend to frontend events + ***************************************************************************** + * + * Frontends should ignore unknown in events. + * All event packets have the same length (40 octets) + * All event packets have common header: + * + * 0 octet + * +-----------------+ + * | type | + * +-----------------+ + * type - uint8_t, event code, XENKBD_TYPE_??? + * + * + * Pointer relative movement event + * 0 1 2 3 octet + * +----------------+----------------+----------------+----------------+ + * | _TYPE_MOTION | reserved | 4 + * +----------------+----------------+----------------+----------------+ + * | rel_x | 8 + * +----------------+----------------+----------------+----------------+ + * | rel_y | 12 + * +----------------+----------------+----------------+----------------+ + * | rel_z | 16 + * +----------------+----------------+----------------+----------------+ + * | reserved | 20 + * +----------------+----------------+----------------+----------------+ + * |/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/| + * +----------------+----------------+----------------+----------------+ + * | reserved | 40 + * +----------------+----------------+----------------+----------------+ + * + * rel_x - int32_t, relative X motion + * rel_y - int32_t, relative Y motion + * rel_z - int32_t, relative Z motion (wheel) + */ + +struct xenkbd_motion +{ + uint8_t type; + int32_t rel_x; + int32_t rel_y; + int32_t rel_z; +}; + +/* + * Key event (includes pointer buttons) + * 0 1 2 3 octet + * +----------------+----------------+----------------+----------------+ + * | _TYPE_KEY | pressed | reserved | 4 + * +----------------+----------------+----------------+----------------+ + * | keycode | 8 + * +----------------+----------------+----------------+----------------+ + * | reserved | 12 + * +----------------+----------------+----------------+----------------+ + * |/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/| + * +----------------+----------------+----------------+----------------+ + * | reserved | 40 + * +----------------+----------------+----------------+----------------+ + * + * pressed - uint8_t, 1 if pressed; 0 otherwise + * keycode - uint32_t, KEY_* from linux/input.h + */ + +struct xenkbd_key +{ + uint8_t type; + uint8_t pressed; + uint32_t keycode; +}; + +/* + * Pointer absolute position event + * 0 1 2 3 octet + * +----------------+----------------+----------------+----------------+ + * | _TYPE_POS | reserved | 4 + * +----------------+----------------+----------------+----------------+ + * | abs_x | 8 + * +----------------+----------------+----------------+----------------+ + * | abs_y | 12 + * +----------------+----------------+----------------+----------------+ + * | rel_z | 16 + * +----------------+----------------+----------------+----------------+ + * | reserved | 20 + * +----------------+----------------+----------------+----------------+ + * |/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/| + * +----------------+----------------+----------------+----------------+ + * | reserved | 40 + * +----------------+----------------+----------------+----------------+ + * + * abs_x - int32_t, absolute X position (in FB pixels) + * abs_y - int32_t, absolute Y position (in FB pixels) + * rel_z - int32_t, relative Z motion (wheel) + */ + +struct xenkbd_position +{ + uint8_t type; + int32_t abs_x; + int32_t abs_y; + int32_t rel_z; +}; + +/* + * Multi-touch event and its sub-types + * + * All multi-touch event packets have common header: + * + * 0 1 2 3 octet + * +----------------+----------------+----------------+----------------+ + * | _TYPE_MTOUCH | event_type | contact_id | reserved | 4 + * +----------------+----------------+----------------+----------------+ + * | reserved | 8 + * +----------------+----------------+----------------+----------------+ + * + * event_type - unt8_t, multi-touch event sub-type, XENKBD_MT_EV_??? + * contact_id - unt8_t, ID of the contact + * + * Touch interactions can consist of one or more contacts. + * For each contact, a series of events is generated, starting + * with a down event, followed by zero or more motion events, + * and ending with an up event. Events relating to the same + * contact point can be identified by the ID of the sequence: contact ID. + * Contact ID may be reused after XENKBD_MT_EV_UP event and + * is in the [0; XENKBD_FIELD_NUM_CONTACTS - 1] range. + * + * For further information please refer to documentation on Wayland [1], + * Linux [2] and Windows [3] multi-touch support. + * + * [1] https://cgit.freedesktop.org/wayland/wayland/tree/protocol/wayland.xml + * [2] https://www.kernel.org/doc/Documentation/input/multi-touch-protocol.txt + * [3] https://msdn.microsoft.com/en-us/library/jj151564(v=vs.85).aspx + * + * + * Multi-touch down event - sent when a new touch is made: touch is assigned + * a unique contact ID, sent with this and consequent events related + * to this touch. + * 0 1 2 3 octet + * +----------------+----------------+----------------+----------------+ + * | _TYPE_MTOUCH | _MT_EV_DOWN | contact_id | reserved | 4 + * +----------------+----------------+----------------+----------------+ + * | reserved | 8 + * +----------------+----------------+----------------+----------------+ + * | abs_x | 12 + * +----------------+----------------+----------------+----------------+ + * | abs_y | 16 + * +----------------+----------------+----------------+----------------+ + * | reserved | 20 + * +----------------+----------------+----------------+----------------+ + * |/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/| + * +----------------+----------------+----------------+----------------+ + * | reserved | 40 + * +----------------+----------------+----------------+----------------+ + * + * abs_x - int32_t, absolute X position, in pixels + * abs_y - int32_t, absolute Y position, in pixels + * + * Multi-touch contact release event + * 0 1 2 3 octet + * +----------------+----------------+----------------+----------------+ + * | _TYPE_MTOUCH | _MT_EV_UP | contact_id | reserved | 4 + * +----------------+----------------+----------------+----------------+ + * | reserved | 8 + * +----------------+----------------+----------------+----------------+ + * |/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/| + * +----------------+----------------+----------------+----------------+ + * | reserved | 40 + * +----------------+----------------+----------------+----------------+ + * + * Multi-touch motion event + * 0 1 2 3 octet + * +----------------+----------------+----------------+----------------+ + * | _TYPE_MTOUCH | _MT_EV_MOTION | contact_id | reserved | 4 + * +----------------+----------------+----------------+----------------+ + * | reserved | 8 + * +----------------+----------------+----------------+----------------+ + * | abs_x | 12 + * +----------------+----------------+----------------+----------------+ + * | abs_y | 16 + * +----------------+----------------+----------------+----------------+ + * | reserved | 20 + * +----------------+----------------+----------------+----------------+ + * |/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/| + * +----------------+----------------+----------------+----------------+ + * | reserved | 40 + * +----------------+----------------+----------------+----------------+ + * + * abs_x - int32_t, absolute X position, in pixels, + * abs_y - int32_t, absolute Y position, in pixels, + * + * Multi-touch input synchronization event - shows end of a set of events + * which logically belong together. + * 0 1 2 3 octet + * +----------------+----------------+----------------+----------------+ + * | _TYPE_MTOUCH | _MT_EV_SYN | contact_id | reserved | 4 + * +----------------+----------------+----------------+----------------+ + * | reserved | 8 + * +----------------+----------------+----------------+----------------+ + * |/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/| + * +----------------+----------------+----------------+----------------+ + * | reserved | 40 + * +----------------+----------------+----------------+----------------+ + * + * Multi-touch shape event - touch point's shape has changed its shape. + * Shape is approximated by an ellipse through the major and minor axis + * lengths: major is the longer diameter of the ellipse and minor is the + * shorter one. Center of the ellipse is reported via + * XENKBD_MT_EV_DOWN/XENKBD_MT_EV_MOTION events. + * 0 1 2 3 octet + * +----------------+----------------+----------------+----------------+ + * | _TYPE_MTOUCH | _MT_EV_SHAPE | contact_id | reserved | 4 + * +----------------+----------------+----------------+----------------+ + * | reserved | 8 + * +----------------+----------------+----------------+----------------+ + * | major | 12 + * +----------------+----------------+----------------+----------------+ + * | minor | 16 + * +----------------+----------------+----------------+----------------+ + * | reserved | 20 + * +----------------+----------------+----------------+----------------+ + * |/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/| + * +----------------+----------------+----------------+----------------+ + * | reserved | 40 + * +----------------+----------------+----------------+----------------+ + * + * major - unt32_t, length of the major axis, pixels + * minor - unt32_t, length of the minor axis, pixels + * + * Multi-touch orientation event - touch point's shape has changed + * its orientation: calculated as a clockwise angle between the major axis + * of the ellipse and positive Y axis in degrees, [-180; +180]. + * 0 1 2 3 octet + * +----------------+----------------+----------------+----------------+ + * | _TYPE_MTOUCH | _MT_EV_ORIENT | contact_id | reserved | 4 + * +----------------+----------------+----------------+----------------+ + * | reserved | 8 + * +----------------+----------------+----------------+----------------+ + * | orientation | reserved | 12 + * +----------------+----------------+----------------+----------------+ + * | reserved | 16 + * +----------------+----------------+----------------+----------------+ + * |/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/| + * +----------------+----------------+----------------+----------------+ + * | reserved | 40 + * +----------------+----------------+----------------+----------------+ + * + * orientation - int16_t, clockwise angle of the major axis + */ + +struct xenkbd_mtouch { + uint8_t type; /* XENKBD_TYPE_MTOUCH */ + uint8_t event_type; /* XENKBD_MT_EV_??? */ + uint8_t contact_id; + uint8_t reserved[5]; /* reserved for the future use */ + union { + struct { + int32_t abs_x; /* absolute X position, pixels */ + int32_t abs_y; /* absolute Y position, pixels */ + } pos; + struct { + uint32_t major; /* length of the major axis, pixels */ + uint32_t minor; /* length of the minor axis, pixels */ + } shape; + int16_t orientation; /* clockwise angle of the major axis */ + } u; +}; + +#define XENKBD_IN_EVENT_SIZE 40 + +union xenkbd_in_event +{ + uint8_t type; + struct xenkbd_motion motion; + struct xenkbd_key key; + struct xenkbd_position pos; + struct xenkbd_mtouch mtouch; + char pad[XENKBD_IN_EVENT_SIZE]; +}; + +/* + ***************************************************************************** + * Frontend to backend events + ***************************************************************************** + * + * Out events may be sent only when requested by backend, and receipt + * of an unknown out event is an error. + * No out events currently defined. + + * All event packets have the same length (40 octets) + * All event packets have common header: + * 0 octet + * +-----------------+ + * | type | + * +-----------------+ + * type - uint8_t, event code + */ + +#define XENKBD_OUT_EVENT_SIZE 40 + +union xenkbd_out_event +{ + uint8_t type; + char pad[XENKBD_OUT_EVENT_SIZE]; +}; + +/* + ***************************************************************************** + * Shared page + ***************************************************************************** + */ + +#define XENKBD_IN_RING_SIZE 2048 +#define XENKBD_IN_RING_LEN (XENKBD_IN_RING_SIZE / XENKBD_IN_EVENT_SIZE) +#define XENKBD_IN_RING_OFFS 1024 +#define XENKBD_IN_RING(page) \ + ((union xenkbd_in_event *)((char *)(page) + XENKBD_IN_RING_OFFS)) +#define XENKBD_IN_RING_REF(page, idx) \ + (XENKBD_IN_RING((page))[(idx) % XENKBD_IN_RING_LEN]) + +#define XENKBD_OUT_RING_SIZE 1024 +#define XENKBD_OUT_RING_LEN (XENKBD_OUT_RING_SIZE / XENKBD_OUT_EVENT_SIZE) +#define XENKBD_OUT_RING_OFFS (XENKBD_IN_RING_OFFS + XENKBD_IN_RING_SIZE) +#define XENKBD_OUT_RING(page) \ + ((union xenkbd_out_event *)((char *)(page) + XENKBD_OUT_RING_OFFS)) +#define XENKBD_OUT_RING_REF(page, idx) \ + (XENKBD_OUT_RING((page))[(idx) % XENKBD_OUT_RING_LEN]) + +struct xenkbd_page +{ + uint32_t in_cons, in_prod; + uint32_t out_cons, out_prod; +}; + +#endif /* __XEN_PUBLIC_IO_KBDIF_H__ */ diff --git a/include/hw/xen/interface/io/netif.h b/include/hw/xen/interface/io/netif.h new file mode 100644 index 0000000000..48fa530950 --- /dev/null +++ b/include/hw/xen/interface/io/netif.h @@ -0,0 +1,1010 @@ +/****************************************************************************** + * netif.h + * + * Unified network-device I/O interface for Xen guest OSes. + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to + * deal in the Software without restriction, including without limitation the + * rights to use, copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER + * DEALINGS IN THE SOFTWARE. + * + * Copyright (c) 2003-2004, Keir Fraser + */ + +#ifndef __XEN_PUBLIC_IO_NETIF_H__ +#define __XEN_PUBLIC_IO_NETIF_H__ + +#include "ring.h" +#include "../grant_table.h" + +/* + * Older implementation of Xen network frontend / backend has an + * implicit dependency on the MAX_SKB_FRAGS as the maximum number of + * ring slots a skb can use. Netfront / netback may not work as + * expected when frontend and backend have different MAX_SKB_FRAGS. + * + * A better approach is to add mechanism for netfront / netback to + * negotiate this value. However we cannot fix all possible + * frontends, so we need to define a value which states the minimum + * slots backend must support. + * + * The minimum value derives from older Linux kernel's MAX_SKB_FRAGS + * (18), which is proved to work with most frontends. Any new backend + * which doesn't negotiate with frontend should expect frontend to + * send a valid packet using slots up to this value. + */ +#define XEN_NETIF_NR_SLOTS_MIN 18 + +/* + * Notifications after enqueuing any type of message should be conditional on + * the appropriate req_event or rsp_event field in the shared ring. + * If the client sends notification for rx requests then it should specify + * feature 'feature-rx-notify' via xenbus. Otherwise the backend will assume + * that it cannot safely queue packets (as it may not be kicked to send them). + */ + +/* + * "feature-split-event-channels" is introduced to separate guest TX + * and RX notification. Backend either doesn't support this feature or + * advertises it via xenstore as 0 (disabled) or 1 (enabled). + * + * To make use of this feature, frontend should allocate two event + * channels for TX and RX, advertise them to backend as + * "event-channel-tx" and "event-channel-rx" respectively. If frontend + * doesn't want to use this feature, it just writes "event-channel" + * node as before. + */ + +/* + * Multiple transmit and receive queues: + * If supported, the backend will write the key "multi-queue-max-queues" to + * the directory for that vif, and set its value to the maximum supported + * number of queues. + * Frontends that are aware of this feature and wish to use it can write the + * key "multi-queue-num-queues", set to the number they wish to use, which + * must be greater than zero, and no more than the value reported by the backend + * in "multi-queue-max-queues". + * + * Queues replicate the shared rings and event channels. + * "feature-split-event-channels" may optionally be used when using + * multiple queues, but is not mandatory. + * + * Each queue consists of one shared ring pair, i.e. there must be the same + * number of tx and rx rings. + * + * For frontends requesting just one queue, the usual event-channel and + * ring-ref keys are written as before, simplifying the backend processing + * to avoid distinguishing between a frontend that doesn't understand the + * multi-queue feature, and one that does, but requested only one queue. + * + * Frontends requesting two or more queues must not write the toplevel + * event-channel (or event-channel-{tx,rx}) and {tx,rx}-ring-ref keys, + * instead writing those keys under sub-keys having the name "queue-N" where + * N is the integer ID of the queue for which those keys belong. Queues + * are indexed from zero. For example, a frontend with two queues and split + * event channels must write the following set of queue-related keys: + * + * /local/domain/1/device/vif/0/multi-queue-num-queues = "2" + * /local/domain/1/device/vif/0/queue-0 = "" + * /local/domain/1/device/vif/0/queue-0/tx-ring-ref = "" + * /local/domain/1/device/vif/0/queue-0/rx-ring-ref = "" + * /local/domain/1/device/vif/0/queue-0/event-channel-tx = "" + * /local/domain/1/device/vif/0/queue-0/event-channel-rx = "" + * /local/domain/1/device/vif/0/queue-1 = "" + * /local/domain/1/device/vif/0/queue-1/tx-ring-ref = "" + * /local/domain/1/device/vif/0/queue-1/rx-ring-ref = "//feature-ctrl-ring = "1" + * + * The frontend provides a control ring to the backend by setting: + * + * /local/domain//device/vif//ctrl-ring-ref = + * /local/domain//device/vif//event-channel-ctrl = + * + * where is the grant reference of the shared page used to + * implement the control ring and is an event channel to be used + * as a mailbox interrupt. These keys must be set before the frontend + * moves into the connected state. + * + * The control ring uses a fixed request/response message size and is + * balanced (i.e. one request to one response), so operationally it is much + * the same as a transmit or receive ring. + * Note that there is no requirement that responses are issued in the same + * order as requests. + */ + +/* + * Hash types + * ========== + * + * For the purposes of the definitions below, 'Packet[]' is an array of + * octets containing an IP packet without options, 'Array[X..Y]' means a + * sub-array of 'Array' containing bytes X thru Y inclusive, and '+' is + * used to indicate concatenation of arrays. + */ + +/* + * A hash calculated over an IP version 4 header as follows: + * + * Buffer[0..8] = Packet[12..15] (source address) + + * Packet[16..19] (destination address) + * + * Result = Hash(Buffer, 8) + */ +#define _XEN_NETIF_CTRL_HASH_TYPE_IPV4 0 +#define XEN_NETIF_CTRL_HASH_TYPE_IPV4 \ + (1 << _XEN_NETIF_CTRL_HASH_TYPE_IPV4) + +/* + * A hash calculated over an IP version 4 header and TCP header as + * follows: + * + * Buffer[0..12] = Packet[12..15] (source address) + + * Packet[16..19] (destination address) + + * Packet[20..21] (source port) + + * Packet[22..23] (destination port) + * + * Result = Hash(Buffer, 12) + */ +#define _XEN_NETIF_CTRL_HASH_TYPE_IPV4_TCP 1 +#define XEN_NETIF_CTRL_HASH_TYPE_IPV4_TCP \ + (1 << _XEN_NETIF_CTRL_HASH_TYPE_IPV4_TCP) + +/* + * A hash calculated over an IP version 6 header as follows: + * + * Buffer[0..32] = Packet[8..23] (source address ) + + * Packet[24..39] (destination address) + * + * Result = Hash(Buffer, 32) + */ +#define _XEN_NETIF_CTRL_HASH_TYPE_IPV6 2 +#define XEN_NETIF_CTRL_HASH_TYPE_IPV6 \ + (1 << _XEN_NETIF_CTRL_HASH_TYPE_IPV6) + +/* + * A hash calculated over an IP version 6 header and TCP header as + * follows: + * + * Buffer[0..36] = Packet[8..23] (source address) + + * Packet[24..39] (destination address) + + * Packet[40..41] (source port) + + * Packet[42..43] (destination port) + * + * Result = Hash(Buffer, 36) + */ +#define _XEN_NETIF_CTRL_HASH_TYPE_IPV6_TCP 3 +#define XEN_NETIF_CTRL_HASH_TYPE_IPV6_TCP \ + (1 << _XEN_NETIF_CTRL_HASH_TYPE_IPV6_TCP) + +/* + * Hash algorithms + * =============== + */ + +#define XEN_NETIF_CTRL_HASH_ALGORITHM_NONE 0 + +/* + * Toeplitz hash: + */ + +#define XEN_NETIF_CTRL_HASH_ALGORITHM_TOEPLITZ 1 + +/* + * Control requests (struct xen_netif_ctrl_request) + * ================================================ + * + * All requests have the following format: + * + * 0 1 2 3 4 5 6 7 octet + * +-----+-----+-----+-----+-----+-----+-----+-----+ + * | id | type | data[0] | + * +-----+-----+-----+-----+-----+-----+-----+-----+ + * | data[1] | data[2] | + * +-----+-----+-----+-----+-----------------------+ + * + * id: the request identifier, echoed in response. + * type: the type of request (see below) + * data[]: any data associated with the request (determined by type) + */ + +struct xen_netif_ctrl_request { + uint16_t id; + uint16_t type; + +#define XEN_NETIF_CTRL_TYPE_INVALID 0 +#define XEN_NETIF_CTRL_TYPE_GET_HASH_FLAGS 1 +#define XEN_NETIF_CTRL_TYPE_SET_HASH_FLAGS 2 +#define XEN_NETIF_CTRL_TYPE_SET_HASH_KEY 3 +#define XEN_NETIF_CTRL_TYPE_GET_HASH_MAPPING_SIZE 4 +#define XEN_NETIF_CTRL_TYPE_SET_HASH_MAPPING_SIZE 5 +#define XEN_NETIF_CTRL_TYPE_SET_HASH_MAPPING 6 +#define XEN_NETIF_CTRL_TYPE_SET_HASH_ALGORITHM 7 +#define XEN_NETIF_CTRL_TYPE_GET_GREF_MAPPING_SIZE 8 +#define XEN_NETIF_CTRL_TYPE_ADD_GREF_MAPPING 9 +#define XEN_NETIF_CTRL_TYPE_DEL_GREF_MAPPING 10 + + uint32_t data[3]; +}; + +/* + * Control responses (struct xen_netif_ctrl_response) + * ================================================== + * + * All responses have the following format: + * + * 0 1 2 3 4 5 6 7 octet + * +-----+-----+-----+-----+-----+-----+-----+-----+ + * | id | type | status | + * +-----+-----+-----+-----+-----+-----+-----+-----+ + * | data | + * +-----+-----+-----+-----+ + * + * id: the corresponding request identifier + * type: the type of the corresponding request + * status: the status of request processing + * data: any data associated with the response (determined by type and + * status) + */ + +struct xen_netif_ctrl_response { + uint16_t id; + uint16_t type; + uint32_t status; + +#define XEN_NETIF_CTRL_STATUS_SUCCESS 0 +#define XEN_NETIF_CTRL_STATUS_NOT_SUPPORTED 1 +#define XEN_NETIF_CTRL_STATUS_INVALID_PARAMETER 2 +#define XEN_NETIF_CTRL_STATUS_BUFFER_OVERFLOW 3 + + uint32_t data; +}; + +/* + * Static Grants (struct xen_netif_gref) + * ===================================== + * + * A frontend may provide a fixed set of grant references to be mapped on + * the backend. The message of type XEN_NETIF_CTRL_TYPE_ADD_GREF_MAPPING + * prior its usage in the command ring allows for creation of these mappings. + * The backend will maintain a fixed amount of these mappings. + * + * XEN_NETIF_CTRL_TYPE_GET_GREF_MAPPING_SIZE lets a frontend query how many + * of these mappings can be kept. + * + * Each entry in the XEN_NETIF_CTRL_TYPE_{ADD,DEL}_GREF_MAPPING input table has + * the following format: + * + * 0 1 2 3 4 5 6 7 octet + * +-----+-----+-----+-----+-----+-----+-----+-----+ + * | grant ref | flags | status | + * +-----+-----+-----+-----+-----+-----+-----+-----+ + * + * grant ref: grant reference (IN) + * flags: flags describing the control operation (IN) + * status: XEN_NETIF_CTRL_STATUS_* (OUT) + * + * 'status' is an output parameter which does not require to be set to zero + * prior to its usage in the corresponding control messages. + */ + +struct xen_netif_gref { + grant_ref_t ref; + uint16_t flags; + +#define _XEN_NETIF_CTRLF_GREF_readonly 0 +#define XEN_NETIF_CTRLF_GREF_readonly (1U<<_XEN_NETIF_CTRLF_GREF_readonly) + + uint16_t status; +}; + +/* + * Control messages + * ================ + * + * XEN_NETIF_CTRL_TYPE_SET_HASH_ALGORITHM + * -------------------------------------- + * + * This is sent by the frontend to set the desired hash algorithm. + * + * Request: + * + * type = XEN_NETIF_CTRL_TYPE_SET_HASH_ALGORITHM + * data[0] = a XEN_NETIF_CTRL_HASH_ALGORITHM_* value + * data[1] = 0 + * data[2] = 0 + * + * Response: + * + * status = XEN_NETIF_CTRL_STATUS_NOT_SUPPORTED - Operation not + * supported + * XEN_NETIF_CTRL_STATUS_INVALID_PARAMETER - The algorithm is not + * supported + * XEN_NETIF_CTRL_STATUS_SUCCESS - Operation successful + * + * NOTE: Setting data[0] to XEN_NETIF_CTRL_HASH_ALGORITHM_NONE disables + * hashing and the backend is free to choose how it steers packets + * to queues (which is the default behaviour). + * + * XEN_NETIF_CTRL_TYPE_GET_HASH_FLAGS + * ---------------------------------- + * + * This is sent by the frontend to query the types of hash supported by + * the backend. + * + * Request: + * + * type = XEN_NETIF_CTRL_TYPE_GET_HASH_FLAGS + * data[0] = 0 + * data[1] = 0 + * data[2] = 0 + * + * Response: + * + * status = XEN_NETIF_CTRL_STATUS_NOT_SUPPORTED - Operation not supported + * XEN_NETIF_CTRL_STATUS_SUCCESS - Operation successful + * data = supported hash types (if operation was successful) + * + * NOTE: A valid hash algorithm must be selected before this operation can + * succeed. + * + * XEN_NETIF_CTRL_TYPE_SET_HASH_FLAGS + * ---------------------------------- + * + * This is sent by the frontend to set the types of hash that the backend + * should calculate. (See above for hash type definitions). + * Note that the 'maximal' type of hash should always be chosen. For + * example, if the frontend sets both IPV4 and IPV4_TCP hash types then + * the latter hash type should be calculated for any TCP packet and the + * former only calculated for non-TCP packets. + * + * Request: + * + * type = XEN_NETIF_CTRL_TYPE_SET_HASH_FLAGS + * data[0] = bitwise OR of XEN_NETIF_CTRL_HASH_TYPE_* values + * data[1] = 0 + * data[2] = 0 + * + * Response: + * + * status = XEN_NETIF_CTRL_STATUS_NOT_SUPPORTED - Operation not + * supported + * XEN_NETIF_CTRL_STATUS_INVALID_PARAMETER - One or more flag + * value is invalid or + * unsupported + * XEN_NETIF_CTRL_STATUS_SUCCESS - Operation successful + * data = 0 + * + * NOTE: A valid hash algorithm must be selected before this operation can + * succeed. + * Also, setting data[0] to zero disables hashing and the backend + * is free to choose how it steers packets to queues. + * + * XEN_NETIF_CTRL_TYPE_SET_HASH_KEY + * -------------------------------- + * + * This is sent by the frontend to set the key of the hash if the algorithm + * requires it. (See hash algorithms above). + * + * Request: + * + * type = XEN_NETIF_CTRL_TYPE_SET_HASH_KEY + * data[0] = grant reference of page containing the key (assumed to + * start at beginning of grant) + * data[1] = size of key in octets + * data[2] = 0 + * + * Response: + * + * status = XEN_NETIF_CTRL_STATUS_NOT_SUPPORTED - Operation not + * supported + * XEN_NETIF_CTRL_STATUS_INVALID_PARAMETER - Key size is invalid + * XEN_NETIF_CTRL_STATUS_BUFFER_OVERFLOW - Key size is larger + * than the backend + * supports + * XEN_NETIF_CTRL_STATUS_SUCCESS - Operation successful + * data = 0 + * + * NOTE: Any key octets not specified are assumed to be zero (the key + * is assumed to be empty by default) and specifying a new key + * invalidates any previous key, hence specifying a key size of + * zero will clear the key (which ensures that the calculated hash + * will always be zero). + * The maximum size of key is algorithm and backend specific, but + * is also limited by the single grant reference. + * The grant reference may be read-only and must remain valid until + * the response has been processed. + * + * XEN_NETIF_CTRL_TYPE_GET_HASH_MAPPING_SIZE + * ----------------------------------------- + * + * This is sent by the frontend to query the maximum size of mapping + * table supported by the backend. The size is specified in terms of + * table entries. + * + * Request: + * + * type = XEN_NETIF_CTRL_TYPE_GET_HASH_MAPPING_SIZE + * data[0] = 0 + * data[1] = 0 + * data[2] = 0 + * + * Response: + * + * status = XEN_NETIF_CTRL_STATUS_NOT_SUPPORTED - Operation not supported + * XEN_NETIF_CTRL_STATUS_SUCCESS - Operation successful + * data = maximum number of entries allowed in the mapping table + * (if operation was successful) or zero if a mapping table is + * not supported (i.e. hash mapping is done only by modular + * arithmetic). + * + * XEN_NETIF_CTRL_TYPE_SET_HASH_MAPPING_SIZE + * ------------------------------------- + * + * This is sent by the frontend to set the actual size of the mapping + * table to be used by the backend. The size is specified in terms of + * table entries. + * Any previous table is invalidated by this message and any new table + * is assumed to be zero filled. + * + * Request: + * + * type = XEN_NETIF_CTRL_TYPE_SET_HASH_MAPPING_SIZE + * data[0] = number of entries in mapping table + * data[1] = 0 + * data[2] = 0 + * + * Response: + * + * status = XEN_NETIF_CTRL_STATUS_NOT_SUPPORTED - Operation not + * supported + * XEN_NETIF_CTRL_STATUS_INVALID_PARAMETER - Table size is invalid + * XEN_NETIF_CTRL_STATUS_SUCCESS - Operation successful + * data = 0 + * + * NOTE: Setting data[0] to 0 means that hash mapping should be done + * using modular arithmetic. + * + * XEN_NETIF_CTRL_TYPE_SET_HASH_MAPPING + * ------------------------------------ + * + * This is sent by the frontend to set the content of the table mapping + * hash value to queue number. The backend should calculate the hash from + * the packet header, use it as an index into the table (modulo the size + * of the table) and then steer the packet to the queue number found at + * that index. + * + * Request: + * + * type = XEN_NETIF_CTRL_TYPE_SET_HASH_MAPPING + * data[0] = grant reference of page containing the mapping (sub-)table + * (assumed to start at beginning of grant) + * data[1] = size of (sub-)table in entries + * data[2] = offset, in entries, of sub-table within overall table + * + * Response: + * + * status = XEN_NETIF_CTRL_STATUS_NOT_SUPPORTED - Operation not + * supported + * XEN_NETIF_CTRL_STATUS_INVALID_PARAMETER - Table size or content + * is invalid + * XEN_NETIF_CTRL_STATUS_BUFFER_OVERFLOW - Table size is larger + * than the backend + * supports + * XEN_NETIF_CTRL_STATUS_SUCCESS - Operation successful + * data = 0 + * + * NOTE: The overall table has the following format: + * + * 0 1 2 3 4 5 6 7 octet + * +-----+-----+-----+-----+-----+-----+-----+-----+ + * | mapping[0] | mapping[1] | + * +-----+-----+-----+-----+-----+-----+-----+-----+ + * | . | + * | . | + * | . | + * +-----+-----+-----+-----+-----+-----+-----+-----+ + * | mapping[N-2] | mapping[N-1] | + * +-----+-----+-----+-----+-----+-----+-----+-----+ + * + * where N is specified by a XEN_NETIF_CTRL_TYPE_SET_HASH_MAPPING_SIZE + * message and each mapping must specifies a queue between 0 and + * "multi-queue-num-queues" (see above). + * The backend may support a mapping table larger than can be + * mapped by a single grant reference. Thus sub-tables within a + * larger table can be individually set by sending multiple messages + * with differing offset values. Specifying a new sub-table does not + * invalidate any table data outside that range. + * The grant reference may be read-only and must remain valid until + * the response has been processed. + * + * XEN_NETIF_CTRL_TYPE_GET_GREF_MAPPING_SIZE + * ----------------------------------------- + * + * This is sent by the frontend to fetch the number of grefs that can be kept + * mapped in the backend. + * + * Request: + * + * type = XEN_NETIF_CTRL_TYPE_GET_GREF_MAPPING_SIZE + * data[0] = queue index (assumed 0 for single queue) + * data[1] = 0 + * data[2] = 0 + * + * Response: + * + * status = XEN_NETIF_CTRL_STATUS_NOT_SUPPORTED - Operation not + * supported + * XEN_NETIF_CTRL_STATUS_INVALID_PARAMETER - The queue index is + * out of range + * XEN_NETIF_CTRL_STATUS_SUCCESS - Operation successful + * data = maximum number of entries allowed in the gref mapping table + * (if operation was successful) or zero if it is not supported. + * + * XEN_NETIF_CTRL_TYPE_ADD_GREF_MAPPING + * ------------------------------------ + * + * This is sent by the frontend for backend to map a list of grant + * references. + * + * Request: + * + * type = XEN_NETIF_CTRL_TYPE_ADD_GREF_MAPPING + * data[0] = queue index + * data[1] = grant reference of page containing the mapping list + * (r/w and assumed to start at beginning of page) + * data[2] = size of list in entries + * + * Response: + * + * status = XEN_NETIF_CTRL_STATUS_NOT_SUPPORTED - Operation not + * supported + * XEN_NETIF_CTRL_STATUS_INVALID_PARAMETER - Operation failed + * XEN_NETIF_CTRL_STATUS_SUCCESS - Operation successful + * + * NOTE: Each entry in the input table has the format outlined + * in struct xen_netif_gref. + * Contrary to XEN_NETIF_CTRL_TYPE_DEL_GREF_MAPPING, the struct + * xen_netif_gref 'status' field is not used and therefore the response + * 'status' determines the success of this operation. In case of + * failure none of grants mappings get added in the backend. + * + * XEN_NETIF_CTRL_TYPE_DEL_GREF_MAPPING + * ------------------------------------ + * + * This is sent by the frontend for backend to unmap a list of grant + * references. + * + * Request: + * + * type = XEN_NETIF_CTRL_TYPE_DEL_GREF_MAPPING + * data[0] = queue index + * data[1] = grant reference of page containing the mapping list + * (r/w and assumed to start at beginning of page) + * data[2] = size of list in entries + * + * Response: + * + * status = XEN_NETIF_CTRL_STATUS_NOT_SUPPORTED - Operation not + * supported + * XEN_NETIF_CTRL_STATUS_INVALID_PARAMETER - Operation failed + * XEN_NETIF_CTRL_STATUS_SUCCESS - Operation successful + * data = number of entries that were unmapped + * + * NOTE: Each entry in the input table has the format outlined in struct + * xen_netif_gref. + * The struct xen_netif_gref 'status' field determines if the entry + * was successfully removed. + * The entries used are only the ones representing grant references that + * were previously the subject of a XEN_NETIF_CTRL_TYPE_ADD_GREF_MAPPING + * operation. Any other entries will have their status set to + * XEN_NETIF_CTRL_STATUS_INVALID_PARAMETER upon completion. + */ + +DEFINE_RING_TYPES(xen_netif_ctrl, + struct xen_netif_ctrl_request, + struct xen_netif_ctrl_response); + +/* + * Guest transmit + * ============== + * + * This is the 'wire' format for transmit (frontend -> backend) packets: + * + * Fragment 1: netif_tx_request_t - flags = NETTXF_* + * size = total packet size + * [Extra 1: netif_extra_info_t] - (only if fragment 1 flags include + * NETTXF_extra_info) + * ... + * [Extra N: netif_extra_info_t] - (only if extra N-1 flags include + * XEN_NETIF_EXTRA_MORE) + * ... + * Fragment N: netif_tx_request_t - (only if fragment N-1 flags include + * NETTXF_more_data - flags on preceding + * extras are not relevant here) + * flags = 0 + * size = fragment size + * + * NOTE: + * + * This format slightly is different from that used for receive + * (backend -> frontend) packets. Specifically, in a multi-fragment + * packet the actual size of fragment 1 can only be determined by + * subtracting the sizes of fragments 2..N from the total packet size. + * + * Ring slot size is 12 octets, however not all request/response + * structs use the full size. + * + * tx request data (netif_tx_request_t) + * ------------------------------------ + * + * 0 1 2 3 4 5 6 7 octet + * +-----+-----+-----+-----+-----+-----+-----+-----+ + * | grant ref | offset | flags | + * +-----+-----+-----+-----+-----+-----+-----+-----+ + * | id | size | + * +-----+-----+-----+-----+ + * + * grant ref: Reference to buffer page. + * offset: Offset within buffer page. + * flags: NETTXF_*. + * id: request identifier, echoed in response. + * size: packet size in bytes. + * + * tx response (netif_tx_response_t) + * --------------------------------- + * + * 0 1 2 3 4 5 6 7 octet + * +-----+-----+-----+-----+-----+-----+-----+-----+ + * | id | status | unused | + * +-----+-----+-----+-----+-----+-----+-----+-----+ + * | unused | + * +-----+-----+-----+-----+ + * + * id: reflects id in transmit request + * status: NETIF_RSP_* + * + * Guest receive + * ============= + * + * This is the 'wire' format for receive (backend -> frontend) packets: + * + * Fragment 1: netif_rx_request_t - flags = NETRXF_* + * size = fragment size + * [Extra 1: netif_extra_info_t] - (only if fragment 1 flags include + * NETRXF_extra_info) + * ... + * [Extra N: netif_extra_info_t] - (only if extra N-1 flags include + * XEN_NETIF_EXTRA_MORE) + * ... + * Fragment N: netif_rx_request_t - (only if fragment N-1 flags include + * NETRXF_more_data - flags on preceding + * extras are not relevant here) + * flags = 0 + * size = fragment size + * + * NOTE: + * + * This format slightly is different from that used for transmit + * (frontend -> backend) packets. Specifically, in a multi-fragment + * packet the size of the packet can only be determined by summing the + * sizes of fragments 1..N. + * + * Ring slot size is 8 octets. + * + * rx request (netif_rx_request_t) + * ------------------------------- + * + * 0 1 2 3 4 5 6 7 octet + * +-----+-----+-----+-----+-----+-----+-----+-----+ + * | id | pad | gref | + * +-----+-----+-----+-----+-----+-----+-----+-----+ + * + * id: request identifier, echoed in response. + * gref: reference to incoming granted frame. + * + * rx response (netif_rx_response_t) + * --------------------------------- + * + * 0 1 2 3 4 5 6 7 octet + * +-----+-----+-----+-----+-----+-----+-----+-----+ + * | id | offset | flags | status | + * +-----+-----+-----+-----+-----+-----+-----+-----+ + * + * id: reflects id in receive request + * offset: offset in page of start of received packet + * flags: NETRXF_* + * status: -ve: NETIF_RSP_*; +ve: Rx'ed pkt size. + * + * NOTE: Historically, to support GSO on the frontend receive side, Linux + * netfront does not make use of the rx response id (because, as + * described below, extra info structures overlay the id field). + * Instead it assumes that responses always appear in the same ring + * slot as their corresponding request. Thus, to maintain + * compatibility, backends must make sure this is the case. + * + * Extra Info + * ========== + * + * Can be present if initial request or response has NET{T,R}XF_extra_info, + * or previous extra request has XEN_NETIF_EXTRA_MORE. + * + * The struct therefore needs to fit into either a tx or rx slot and + * is therefore limited to 8 octets. + * + * NOTE: Because extra info data overlays the usual request/response + * structures, there is no id information in the opposite direction. + * So, if an extra info overlays an rx response the frontend can + * assume that it is in the same ring slot as the request that was + * consumed to make the slot available, and the backend must ensure + * this assumption is true. + * + * extra info (netif_extra_info_t) + * ------------------------------- + * + * General format: + * + * 0 1 2 3 4 5 6 7 octet + * +-----+-----+-----+-----+-----+-----+-----+-----+ + * |type |flags| type specific data | + * +-----+-----+-----+-----+-----+-----+-----+-----+ + * | padding for tx | + * +-----+-----+-----+-----+ + * + * type: XEN_NETIF_EXTRA_TYPE_* + * flags: XEN_NETIF_EXTRA_FLAG_* + * padding for tx: present only in the tx case due to 8 octet limit + * from rx case. Not shown in type specific entries + * below. + * + * XEN_NETIF_EXTRA_TYPE_GSO: + * + * 0 1 2 3 4 5 6 7 octet + * +-----+-----+-----+-----+-----+-----+-----+-----+ + * |type |flags| size |type | pad | features | + * +-----+-----+-----+-----+-----+-----+-----+-----+ + * + * type: Must be XEN_NETIF_EXTRA_TYPE_GSO + * flags: XEN_NETIF_EXTRA_FLAG_* + * size: Maximum payload size of each segment. For example, + * for TCP this is just the path MSS. + * type: XEN_NETIF_GSO_TYPE_*: This determines the protocol of + * the packet and any extra features required to segment the + * packet properly. + * features: EN_NETIF_GSO_FEAT_*: This specifies any extra GSO + * features required to process this packet, such as ECN + * support for TCPv4. + * + * XEN_NETIF_EXTRA_TYPE_MCAST_{ADD,DEL}: + * + * 0 1 2 3 4 5 6 7 octet + * +-----+-----+-----+-----+-----+-----+-----+-----+ + * |type |flags| addr | + * +-----+-----+-----+-----+-----+-----+-----+-----+ + * + * type: Must be XEN_NETIF_EXTRA_TYPE_MCAST_{ADD,DEL} + * flags: XEN_NETIF_EXTRA_FLAG_* + * addr: address to add/remove + * + * XEN_NETIF_EXTRA_TYPE_HASH: + * + * A backend that supports teoplitz hashing is assumed to accept + * this type of extra info in transmit packets. + * A frontend that enables hashing is assumed to accept + * this type of extra info in receive packets. + * + * 0 1 2 3 4 5 6 7 octet + * +-----+-----+-----+-----+-----+-----+-----+-----+ + * |type |flags|htype| alg |LSB ---- value ---- MSB| + * +-----+-----+-----+-----+-----+-----+-----+-----+ + * + * type: Must be XEN_NETIF_EXTRA_TYPE_HASH + * flags: XEN_NETIF_EXTRA_FLAG_* + * htype: Hash type (one of _XEN_NETIF_CTRL_HASH_TYPE_* - see above) + * alg: The algorithm used to calculate the hash (one of + * XEN_NETIF_CTRL_HASH_TYPE_ALGORITHM_* - see above) + * value: Hash value + */ + +/* Protocol checksum field is blank in the packet (hardware offload)? */ +#define _NETTXF_csum_blank (0) +#define NETTXF_csum_blank (1U<<_NETTXF_csum_blank) + +/* Packet data has been validated against protocol checksum. */ +#define _NETTXF_data_validated (1) +#define NETTXF_data_validated (1U<<_NETTXF_data_validated) + +/* Packet continues in the next request descriptor. */ +#define _NETTXF_more_data (2) +#define NETTXF_more_data (1U<<_NETTXF_more_data) + +/* Packet to be followed by extra descriptor(s). */ +#define _NETTXF_extra_info (3) +#define NETTXF_extra_info (1U<<_NETTXF_extra_info) + +#define XEN_NETIF_MAX_TX_SIZE 0xFFFF +struct netif_tx_request { + grant_ref_t gref; + uint16_t offset; + uint16_t flags; + uint16_t id; + uint16_t size; +}; +typedef struct netif_tx_request netif_tx_request_t; + +/* Types of netif_extra_info descriptors. */ +#define XEN_NETIF_EXTRA_TYPE_NONE (0) /* Never used - invalid */ +#define XEN_NETIF_EXTRA_TYPE_GSO (1) /* u.gso */ +#define XEN_NETIF_EXTRA_TYPE_MCAST_ADD (2) /* u.mcast */ +#define XEN_NETIF_EXTRA_TYPE_MCAST_DEL (3) /* u.mcast */ +#define XEN_NETIF_EXTRA_TYPE_HASH (4) /* u.hash */ +#define XEN_NETIF_EXTRA_TYPE_MAX (5) + +/* netif_extra_info_t flags. */ +#define _XEN_NETIF_EXTRA_FLAG_MORE (0) +#define XEN_NETIF_EXTRA_FLAG_MORE (1U<<_XEN_NETIF_EXTRA_FLAG_MORE) + +/* GSO types */ +#define XEN_NETIF_GSO_TYPE_NONE (0) +#define XEN_NETIF_GSO_TYPE_TCPV4 (1) +#define XEN_NETIF_GSO_TYPE_TCPV6 (2) + +/* + * This structure needs to fit within both netif_tx_request_t and + * netif_rx_response_t for compatibility. + */ +struct netif_extra_info { + uint8_t type; + uint8_t flags; + union { + struct { + uint16_t size; + uint8_t type; + uint8_t pad; + uint16_t features; + } gso; + struct { + uint8_t addr[6]; + } mcast; + struct { + uint8_t type; + uint8_t algorithm; + uint8_t value[4]; + } hash; + uint16_t pad[3]; + } u; +}; +typedef struct netif_extra_info netif_extra_info_t; + +struct netif_tx_response { + uint16_t id; + int16_t status; +}; +typedef struct netif_tx_response netif_tx_response_t; + +struct netif_rx_request { + uint16_t id; /* Echoed in response message. */ + uint16_t pad; + grant_ref_t gref; +}; +typedef struct netif_rx_request netif_rx_request_t; + +/* Packet data has been validated against protocol checksum. */ +#define _NETRXF_data_validated (0) +#define NETRXF_data_validated (1U<<_NETRXF_data_validated) + +/* Protocol checksum field is blank in the packet (hardware offload)? */ +#define _NETRXF_csum_blank (1) +#define NETRXF_csum_blank (1U<<_NETRXF_csum_blank) + +/* Packet continues in the next request descriptor. */ +#define _NETRXF_more_data (2) +#define NETRXF_more_data (1U<<_NETRXF_more_data) + +/* Packet to be followed by extra descriptor(s). */ +#define _NETRXF_extra_info (3) +#define NETRXF_extra_info (1U<<_NETRXF_extra_info) + +/* Packet has GSO prefix. Deprecated but included for compatibility */ +#define _NETRXF_gso_prefix (4) +#define NETRXF_gso_prefix (1U<<_NETRXF_gso_prefix) + +struct netif_rx_response { + uint16_t id; + uint16_t offset; + uint16_t flags; + int16_t status; +}; +typedef struct netif_rx_response netif_rx_response_t; + +/* + * Generate netif ring structures and types. + */ + +DEFINE_RING_TYPES(netif_tx, struct netif_tx_request, struct netif_tx_response); +DEFINE_RING_TYPES(netif_rx, struct netif_rx_request, struct netif_rx_response); + +#define NETIF_RSP_DROPPED -2 +#define NETIF_RSP_ERROR -1 +#define NETIF_RSP_OKAY 0 +/* No response: used for auxiliary requests (e.g., netif_extra_info_t). */ +#define NETIF_RSP_NULL 1 + +#endif diff --git a/include/hw/xen/interface/io/protocols.h b/include/hw/xen/interface/io/protocols.h new file mode 100644 index 0000000000..52b4de0f81 --- /dev/null +++ b/include/hw/xen/interface/io/protocols.h @@ -0,0 +1,42 @@ +/****************************************************************************** + * protocols.h + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to + * deal in the Software without restriction, including without limitation the + * rights to use, copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER + * DEALINGS IN THE SOFTWARE. + * + * Copyright (c) 2008, Keir Fraser + */ + +#ifndef __XEN_PROTOCOLS_H__ +#define __XEN_PROTOCOLS_H__ + +#define XEN_IO_PROTO_ABI_X86_32 "x86_32-abi" +#define XEN_IO_PROTO_ABI_X86_64 "x86_64-abi" +#define XEN_IO_PROTO_ABI_ARM "arm-abi" + +#if defined(__i386__) +# define XEN_IO_PROTO_ABI_NATIVE XEN_IO_PROTO_ABI_X86_32 +#elif defined(__x86_64__) +# define XEN_IO_PROTO_ABI_NATIVE XEN_IO_PROTO_ABI_X86_64 +#elif defined(__arm__) || defined(__aarch64__) +# define XEN_IO_PROTO_ABI_NATIVE XEN_IO_PROTO_ABI_ARM +#else +# error arch fixup needed here +#endif + +#endif diff --git a/include/hw/xen/io/ring.h b/include/hw/xen/interface/io/ring.h similarity index 100% rename from include/hw/xen/io/ring.h rename to include/hw/xen/interface/io/ring.h diff --git a/include/hw/xen/interface/io/usbif.h b/include/hw/xen/interface/io/usbif.h new file mode 100644 index 0000000000..c6a58639d6 --- /dev/null +++ b/include/hw/xen/interface/io/usbif.h @@ -0,0 +1,254 @@ +/* + * usbif.h + * + * USB I/O interface for Xen guest OSes. + * + * Copyright (C) 2009, FUJITSU LABORATORIES LTD. + * Author: Noboru Iwamatsu + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to + * deal in the Software without restriction, including without limitation the + * rights to use, copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER + * DEALINGS IN THE SOFTWARE. + */ + +#ifndef __XEN_PUBLIC_IO_USBIF_H__ +#define __XEN_PUBLIC_IO_USBIF_H__ + +#include "ring.h" +#include "../grant_table.h" + +/* + * Feature and Parameter Negotiation + * ================================= + * The two halves of a Xen pvUSB driver utilize nodes within the XenStore to + * communicate capabilities and to negotiate operating parameters. This + * section enumerates these nodes which reside in the respective front and + * backend portions of the XenStore, following the XenBus convention. + * + * Any specified default value is in effect if the corresponding XenBus node + * is not present in the XenStore. + * + * XenStore nodes in sections marked "PRIVATE" are solely for use by the + * driver side whose XenBus tree contains them. + * + ***************************************************************************** + * Backend XenBus Nodes + ***************************************************************************** + * + *------------------ Backend Device Identification (PRIVATE) ------------------ + * + * num-ports + * Values: unsigned [1...31] + * + * Number of ports for this (virtual) USB host connector. + * + * usb-ver + * Values: unsigned [1...2] + * + * USB version of this host connector: 1 = USB 1.1, 2 = USB 2.0. + * + * port/[1...31] + * Values: string + * + * Physical USB device connected to the given port, e.g. "3-1.5". + * + ***************************************************************************** + * Frontend XenBus Nodes + ***************************************************************************** + * + *----------------------- Request Transport Parameters ----------------------- + * + * event-channel + * Values: unsigned + * + * The identifier of the Xen event channel used to signal activity + * in the ring buffer. + * + * urb-ring-ref + * Values: unsigned + * + * The Xen grant reference granting permission for the backend to map + * the sole page in a single page sized ring buffer. This is the ring + * buffer for urb requests. + * + * conn-ring-ref + * Values: unsigned + * + * The Xen grant reference granting permission for the backend to map + * the sole page in a single page sized ring buffer. This is the ring + * buffer for connection/disconnection requests. + * + * protocol + * Values: string (XEN_IO_PROTO_ABI_*) + * Default Value: XEN_IO_PROTO_ABI_NATIVE + * + * The machine ABI rules governing the format of all ring request and + * response structures. + * + */ + +enum usb_spec_version { + USB_VER_UNKNOWN = 0, + USB_VER_USB11, + USB_VER_USB20, + USB_VER_USB30, /* not supported yet */ +}; + +/* + * USB pipe in usbif_request + * + * - port number: bits 0-4 + * (USB_MAXCHILDREN is 31) + * + * - operation flag: bit 5 + * (0 = submit urb, + * 1 = unlink urb) + * + * - direction: bit 7 + * (0 = Host-to-Device [Out] + * 1 = Device-to-Host [In]) + * + * - device address: bits 8-14 + * + * - endpoint: bits 15-18 + * + * - pipe type: bits 30-31 + * (00 = isochronous, 01 = interrupt, + * 10 = control, 11 = bulk) + */ + +#define USBIF_PIPE_PORT_MASK 0x0000001f +#define USBIF_PIPE_UNLINK 0x00000020 +#define USBIF_PIPE_DIR 0x00000080 +#define USBIF_PIPE_DEV_MASK 0x0000007f +#define USBIF_PIPE_DEV_SHIFT 8 +#define USBIF_PIPE_EP_MASK 0x0000000f +#define USBIF_PIPE_EP_SHIFT 15 +#define USBIF_PIPE_TYPE_MASK 0x00000003 +#define USBIF_PIPE_TYPE_SHIFT 30 +#define USBIF_PIPE_TYPE_ISOC 0 +#define USBIF_PIPE_TYPE_INT 1 +#define USBIF_PIPE_TYPE_CTRL 2 +#define USBIF_PIPE_TYPE_BULK 3 + +#define usbif_pipeportnum(pipe) ((pipe) & USBIF_PIPE_PORT_MASK) +#define usbif_setportnum_pipe(pipe, portnum) ((pipe) | (portnum)) + +#define usbif_pipeunlink(pipe) ((pipe) & USBIF_PIPE_UNLINK) +#define usbif_pipesubmit(pipe) (!usbif_pipeunlink(pipe)) +#define usbif_setunlink_pipe(pipe) ((pipe) | USBIF_PIPE_UNLINK) + +#define usbif_pipein(pipe) ((pipe) & USBIF_PIPE_DIR) +#define usbif_pipeout(pipe) (!usbif_pipein(pipe)) + +#define usbif_pipedevice(pipe) \ + (((pipe) >> USBIF_PIPE_DEV_SHIFT) & USBIF_PIPE_DEV_MASK) + +#define usbif_pipeendpoint(pipe) \ + (((pipe) >> USBIF_PIPE_EP_SHIFT) & USBIF_PIPE_EP_MASK) + +#define usbif_pipetype(pipe) \ + (((pipe) >> USBIF_PIPE_TYPE_SHIFT) & USBIF_PIPE_TYPE_MASK) +#define usbif_pipeisoc(pipe) (usbif_pipetype(pipe) == USBIF_PIPE_TYPE_ISOC) +#define usbif_pipeint(pipe) (usbif_pipetype(pipe) == USBIF_PIPE_TYPE_INT) +#define usbif_pipectrl(pipe) (usbif_pipetype(pipe) == USBIF_PIPE_TYPE_CTRL) +#define usbif_pipebulk(pipe) (usbif_pipetype(pipe) == USBIF_PIPE_TYPE_BULK) + +#define USBIF_MAX_SEGMENTS_PER_REQUEST (16) +#define USBIF_MAX_PORTNR 31 +#define USBIF_RING_SIZE 4096 + +/* + * RING for transferring urbs. + */ +struct usbif_request_segment { + grant_ref_t gref; + uint16_t offset; + uint16_t length; +}; + +struct usbif_urb_request { + uint16_t id; /* request id */ + uint16_t nr_buffer_segs; /* number of urb->transfer_buffer segments */ + + /* basic urb parameter */ + uint32_t pipe; + uint16_t transfer_flags; +#define USBIF_SHORT_NOT_OK 0x0001 + uint16_t buffer_length; + union { + uint8_t ctrl[8]; /* setup_packet (Ctrl) */ + + struct { + uint16_t interval; /* maximum (1024*8) in usb core */ + uint16_t start_frame; /* start frame */ + uint16_t number_of_packets; /* number of ISO packet */ + uint16_t nr_frame_desc_segs; /* number of iso_frame_desc segments */ + } isoc; + + struct { + uint16_t interval; /* maximum (1024*8) in usb core */ + uint16_t pad[3]; + } intr; + + struct { + uint16_t unlink_id; /* unlink request id */ + uint16_t pad[3]; + } unlink; + + } u; + + /* urb data segments */ + struct usbif_request_segment seg[USBIF_MAX_SEGMENTS_PER_REQUEST]; +}; +typedef struct usbif_urb_request usbif_urb_request_t; + +struct usbif_urb_response { + uint16_t id; /* request id */ + uint16_t start_frame; /* start frame (ISO) */ + int32_t status; /* status (non-ISO) */ + int32_t actual_length; /* actual transfer length */ + int32_t error_count; /* number of ISO errors */ +}; +typedef struct usbif_urb_response usbif_urb_response_t; + +DEFINE_RING_TYPES(usbif_urb, struct usbif_urb_request, struct usbif_urb_response); +#define USB_URB_RING_SIZE __CONST_RING_SIZE(usbif_urb, USBIF_RING_SIZE) + +/* + * RING for notifying connect/disconnect events to frontend + */ +struct usbif_conn_request { + uint16_t id; +}; +typedef struct usbif_conn_request usbif_conn_request_t; + +struct usbif_conn_response { + uint16_t id; /* request id */ + uint8_t portnum; /* port number */ + uint8_t speed; /* usb_device_speed */ +#define USBIF_SPEED_NONE 0 +#define USBIF_SPEED_LOW 1 +#define USBIF_SPEED_FULL 2 +#define USBIF_SPEED_HIGH 3 +}; +typedef struct usbif_conn_response usbif_conn_response_t; + +DEFINE_RING_TYPES(usbif_conn, struct usbif_conn_request, struct usbif_conn_response); +#define USB_CONN_RING_SIZE __CONST_RING_SIZE(usbif_conn, USBIF_RING_SIZE) + +#endif /* __XEN_PUBLIC_IO_USBIF_H__ */ diff --git a/include/hw/xen/interface/io/xenbus.h b/include/hw/xen/interface/io/xenbus.h new file mode 100644 index 0000000000..2fbf2a7fdc --- /dev/null +++ b/include/hw/xen/interface/io/xenbus.h @@ -0,0 +1,70 @@ +/***************************************************************************** + * xenbus.h + * + * Xenbus protocol details. + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to + * deal in the Software without restriction, including without limitation the + * rights to use, copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER + * DEALINGS IN THE SOFTWARE. + * + * Copyright (C) 2005 XenSource Ltd. + */ + +#ifndef _XEN_PUBLIC_IO_XENBUS_H +#define _XEN_PUBLIC_IO_XENBUS_H + +/* + * The state of either end of the Xenbus, i.e. the current communication + * status of initialisation across the bus. States here imply nothing about + * the state of the connection between the driver and the kernel's device + * layers. + */ +enum xenbus_state { + XenbusStateUnknown = 0, + + XenbusStateInitialising = 1, + + /* + * InitWait: Finished early initialisation but waiting for information + * from the peer or hotplug scripts. + */ + XenbusStateInitWait = 2, + + /* + * Initialised: Waiting for a connection from the peer. + */ + XenbusStateInitialised = 3, + + XenbusStateConnected = 4, + + /* + * Closing: The device is being closed due to an error or an unplug event. + */ + XenbusStateClosing = 5, + + XenbusStateClosed = 6, + + /* + * Reconfiguring: The device is being reconfigured. + */ + XenbusStateReconfiguring = 7, + + XenbusStateReconfigured = 8 +}; +typedef enum xenbus_state XenbusState; + +#endif /* _XEN_PUBLIC_IO_XENBUS_H */ diff --git a/include/hw/xen/xen_common.h b/include/hw/xen/xen_common.h index 9a8155e172..0504b43659 100644 --- a/include/hw/xen/xen_common.h +++ b/include/hw/xen/xen_common.h @@ -12,7 +12,7 @@ #include #include -#include +#include "hw/xen/interface/io/xenbus.h" #include "hw/hw.h" #include "hw/xen/xen.h"