docs: Build and install all the docs in a single manual
When we first converted our documentation to Sphinx, we split it into multiple manuals (system, interop, tools, etc), which are all built separately. The primary driver for this was wanting to be able to avoid shipping the 'devel' manual to end-users. However, this is working against the grain of the way Sphinx wants to be used and causes some annoyances: * Cross-references between documents become much harder or possibly impossible * There is no single index to the whole documentation * Within one manual there's no links or table-of-contents info that lets you easily navigate to the others * The devel manual doesn't get published on the QEMU website (it would be nice to able to refer to it there) Merely hiding our developer documentation from end users seems like it's not enough benefit for these costs. Combine all the documentation into a single manual (the same way that the readthedocs site builds it) and install the whole thing. The previous manual divisions remain as the new top level sections in the manual. * The per-manual conf.py files are no longer needed * The man_pages[] specifications previously in each per-manual conf.py move to the top level conf.py * docs/meson.build logic is simplified as we now only need to run Sphinx once for the HTML and then once for the manpages5B * The old index.html.in that produced the top-level page with links to each manual is no longer needed Unfortunately this means that we now have to build the HTML documentation into docs/manual in the build tree rather than directly into docs/; otherwise it is too awkward to ensure we install only the built manual and not also the dependency info, stamp file, etc. The manual still ends up in the same place in the final installed directory, but anybody who was consulting documentation from within the build tree will have to adjust where they're looking. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-id: 20210115154449.4801-1-peter.maydell@linaro.org
This commit is contained in:
Peter Maydell
parent
0ae4f11ee5
commit
b93f4fbdc4
@ -622,8 +622,8 @@ pages:
|
||||
-t "Welcome to the QEMU sourcecode"
|
||||
- mv HTML public/src
|
||||
# Project documentation
|
||||
- mv build/docs/index.html public/
|
||||
- for i in devel interop specs system tools user ; do mv build/docs/$i public/ ; done
|
||||
- make -C build install DESTDIR=$(pwd)/temp-install
|
||||
- mv temp-install/usr/local/share/doc/qemu/* public/
|
||||
artifacts:
|
||||
paths:
|
||||
- public
|
||||
|
||||
46
docs/conf.py
46
docs/conf.py
@ -224,7 +224,51 @@ latex_documents = [
|
||||
|
||||
# -- Options for manual page output ---------------------------------------
|
||||
# Individual manual/conf.py can override this to create man pages
|
||||
man_pages = []
|
||||
man_pages = [
|
||||
('interop/qemu-ga', 'qemu-ga',
|
||||
'QEMU Guest Agent',
|
||||
['Michael Roth <mdroth@linux.vnet.ibm.com>'], 8),
|
||||
('interop/qemu-ga-ref', 'qemu-ga-ref',
|
||||
'QEMU Guest Agent Protocol Reference',
|
||||
[], 7),
|
||||
('interop/qemu-qmp-ref', 'qemu-qmp-ref',
|
||||
'QEMU QMP Reference Manual',
|
||||
[], 7),
|
||||
('interop/qemu-storage-daemon-qmp-ref', 'qemu-storage-daemon-qmp-ref',
|
||||
'QEMU Storage Daemon QMP Reference Manual',
|
||||
[], 7),
|
||||
('system/qemu-manpage', 'qemu',
|
||||
'QEMU User Documentation',
|
||||
['Fabrice Bellard'], 1),
|
||||
('system/qemu-block-drivers', 'qemu-block-drivers',
|
||||
'QEMU block drivers reference',
|
||||
['Fabrice Bellard and the QEMU Project developers'], 7),
|
||||
('system/qemu-cpu-models', 'qemu-cpu-models',
|
||||
'QEMU CPU Models',
|
||||
['The QEMU Project developers'], 7),
|
||||
('tools/qemu-img', 'qemu-img',
|
||||
'QEMU disk image utility',
|
||||
['Fabrice Bellard'], 1),
|
||||
('tools/qemu-nbd', 'qemu-nbd',
|
||||
'QEMU Disk Network Block Device Server',
|
||||
['Anthony Liguori <anthony@codemonkey.ws>'], 8),
|
||||
('tools/qemu-pr-helper', 'qemu-pr-helper',
|
||||
'QEMU persistent reservation helper',
|
||||
[], 8),
|
||||
('tools/qemu-storage-daemon', 'qemu-storage-daemon',
|
||||
'QEMU storage daemon',
|
||||
[], 1),
|
||||
('tools/qemu-trace-stap', 'qemu-trace-stap',
|
||||
'QEMU SystemTap trace tool',
|
||||
[], 1),
|
||||
('tools/virtfs-proxy-helper', 'virtfs-proxy-helper',
|
||||
'QEMU 9p virtfs proxy filesystem helper',
|
||||
['M. Mohan Kumar'], 1),
|
||||
('tools/virtiofsd', 'virtiofsd',
|
||||
'QEMU virtio-fs shared file system daemon',
|
||||
['Stefan Hajnoczi <stefanha@redhat.com>',
|
||||
'Masayoshi Mizuma <m.mizuma@jp.fujitsu.com>'], 1),
|
||||
]
|
||||
|
||||
# -- Options for Texinfo output -------------------------------------------
|
||||
|
||||
|
||||
@ -1,15 +0,0 @@
|
||||
# -*- coding: utf-8 -*-
|
||||
#
|
||||
# QEMU documentation build configuration file for the 'devel' manual.
|
||||
#
|
||||
# This includes the top level conf file and then makes any necessary tweaks.
|
||||
import sys
|
||||
import os
|
||||
|
||||
qemu_docdir = os.path.abspath("..")
|
||||
parent_config = os.path.join(qemu_docdir, "conf.py")
|
||||
exec(compile(open(parent_config, "rb").read(), parent_config, 'exec'))
|
||||
|
||||
# This slightly misuses the 'description', but is the best way to get
|
||||
# the manual title to appear in the sidebar.
|
||||
html_theme_options['description'] = u'Developer''s Guide'
|
||||
@ -1,17 +0,0 @@
|
||||
<!DOCTYPE html>
|
||||
<html lang="en">
|
||||
<head>
|
||||
<meta charset="UTF-8">
|
||||
<title>QEMU @VERSION@ Documentation</title>
|
||||
</head>
|
||||
<body>
|
||||
<h1>QEMU @VERSION@ Documentation</h1>
|
||||
<ul>
|
||||
<li><a href="system/index.html">System Emulation User's Guide</a></li>
|
||||
<li><a href="user/index.html">User Mode Emulation User's Guide</a></li>
|
||||
<li><a href="tools/index.html">Tools Guide</a></li>
|
||||
<li><a href="interop/index.html">System Emulation Management and Interoperability Guide</a></li>
|
||||
<li><a href="specs/index.html">System Emulation Guest Hardware Specifications</a></li>
|
||||
</ul>
|
||||
</body>
|
||||
</html>
|
||||
@ -1,28 +0,0 @@
|
||||
# -*- coding: utf-8 -*-
|
||||
#
|
||||
# QEMU documentation build configuration file for the 'interop' manual.
|
||||
#
|
||||
# This includes the top level conf file and then makes any necessary tweaks.
|
||||
import sys
|
||||
import os
|
||||
|
||||
qemu_docdir = os.path.abspath("..")
|
||||
parent_config = os.path.join(qemu_docdir, "conf.py")
|
||||
exec(compile(open(parent_config, "rb").read(), parent_config, 'exec'))
|
||||
|
||||
# This slightly misuses the 'description', but is the best way to get
|
||||
# the manual title to appear in the sidebar.
|
||||
html_theme_options['description'] = u'System Emulation Management and Interoperability Guide'
|
||||
|
||||
# One entry per manual page. List of tuples
|
||||
# (source start file, name, description, authors, manual section).
|
||||
man_pages = [
|
||||
('qemu-ga', 'qemu-ga', u'QEMU Guest Agent',
|
||||
['Michael Roth <mdroth@linux.vnet.ibm.com>'], 8),
|
||||
('qemu-ga-ref', 'qemu-ga-ref', 'QEMU Guest Agent Protocol Reference',
|
||||
[], 7),
|
||||
('qemu-qmp-ref', 'qemu-qmp-ref', 'QEMU QMP Reference Manual',
|
||||
[], 7),
|
||||
('qemu-storage-daemon-qmp-ref', 'qemu-storage-daemon-qmp-ref',
|
||||
'QEMU Storage Daemon QMP Reference Manual', [], 7),
|
||||
]
|
||||
@ -46,19 +46,11 @@ if build_docs
|
||||
meson.source_root() / 'docs/sphinx/qmp_lexer.py',
|
||||
qapi_gen_depends ]
|
||||
|
||||
configure_file(output: 'index.html',
|
||||
input: files('index.html.in'),
|
||||
configuration: {'VERSION': meson.project_version()},
|
||||
install_dir: qemu_docdir)
|
||||
manuals = [ 'devel', 'interop', 'tools', 'specs', 'system', 'user' ]
|
||||
man_pages = {
|
||||
'interop' : {
|
||||
'qemu-ga.8': (have_tools ? 'man8' : ''),
|
||||
'qemu-ga-ref.7': 'man7',
|
||||
'qemu-qmp-ref.7': 'man7',
|
||||
'qemu-storage-daemon-qmp-ref.7': (have_tools ? 'man7' : ''),
|
||||
},
|
||||
'tools': {
|
||||
'qemu-img.1': (have_tools ? 'man1' : ''),
|
||||
'qemu-nbd.8': (have_tools ? 'man8' : ''),
|
||||
'qemu-pr-helper.8': (have_tools ? 'man8' : ''),
|
||||
@ -66,53 +58,47 @@ if build_docs
|
||||
'qemu-trace-stap.1': (config_host.has_key('CONFIG_TRACE_SYSTEMTAP') ? 'man1' : ''),
|
||||
'virtfs-proxy-helper.1': (have_virtfs_proxy_helper ? 'man1' : ''),
|
||||
'virtiofsd.1': (have_virtiofsd ? 'man1' : ''),
|
||||
},
|
||||
'system': {
|
||||
'qemu.1': 'man1',
|
||||
'qemu-block-drivers.7': 'man7',
|
||||
'qemu-cpu-models.7': 'man7'
|
||||
},
|
||||
}
|
||||
|
||||
sphinxdocs = []
|
||||
sphinxmans = []
|
||||
foreach manual : manuals
|
||||
private_dir = meson.current_build_dir() / (manual + '.p')
|
||||
output_dir = meson.current_build_dir() / manual
|
||||
input_dir = meson.current_source_dir() / manual
|
||||
|
||||
this_manual = custom_target(manual + ' manual',
|
||||
private_dir = meson.current_build_dir() / 'manual.p'
|
||||
output_dir = meson.current_build_dir() / 'manual'
|
||||
input_dir = meson.current_source_dir()
|
||||
|
||||
this_manual = custom_target('QEMU manual',
|
||||
build_by_default: build_docs,
|
||||
output: [manual + '.stamp'],
|
||||
input: [files('conf.py'), files(manual / 'conf.py')],
|
||||
depfile: manual + '.d',
|
||||
output: 'docs.stamp',
|
||||
input: files('conf.py'),
|
||||
depfile: 'docs.d',
|
||||
depend_files: sphinx_extn_depends,
|
||||
command: [SPHINX_ARGS, '-Ddepfile=@DEPFILE@',
|
||||
'-Ddepfile_stamp=@OUTPUT0@',
|
||||
'-b', 'html', '-d', private_dir,
|
||||
input_dir, output_dir])
|
||||
sphinxdocs += this_manual
|
||||
if build_docs and manual != 'devel'
|
||||
install_subdir(output_dir, install_dir: qemu_docdir)
|
||||
endif
|
||||
sphinxdocs += this_manual
|
||||
install_subdir(output_dir, install_dir: qemu_docdir, strip_directory: true)
|
||||
|
||||
these_man_pages = []
|
||||
install_dirs = []
|
||||
foreach page, section : man_pages.get(manual, {})
|
||||
these_man_pages += page
|
||||
install_dirs += section == '' ? false : get_option('mandir') / section
|
||||
endforeach
|
||||
if these_man_pages.length() > 0
|
||||
sphinxmans += custom_target(manual + ' man pages',
|
||||
build_by_default: build_docs,
|
||||
output: these_man_pages,
|
||||
input: this_manual,
|
||||
install: build_docs,
|
||||
install_dir: install_dirs,
|
||||
command: [SPHINX_ARGS, '-b', 'man', '-d', private_dir,
|
||||
input_dir, meson.current_build_dir()])
|
||||
endif
|
||||
these_man_pages = []
|
||||
install_dirs = []
|
||||
foreach page, section : man_pages
|
||||
these_man_pages += page
|
||||
install_dirs += section == '' ? false : get_option('mandir') / section
|
||||
endforeach
|
||||
|
||||
sphinxmans += custom_target('QEMU man pages',
|
||||
build_by_default: build_docs,
|
||||
output: these_man_pages,
|
||||
input: this_manual,
|
||||
install: build_docs,
|
||||
install_dir: install_dirs,
|
||||
command: [SPHINX_ARGS, '-b', 'man', '-d', private_dir,
|
||||
input_dir, meson.current_build_dir()])
|
||||
|
||||
alias_target('sphinxdocs', sphinxdocs)
|
||||
alias_target('html', sphinxdocs)
|
||||
alias_target('man', sphinxmans)
|
||||
|
||||
@ -1,16 +0,0 @@
|
||||
# -*- coding: utf-8 -*-
|
||||
#
|
||||
# QEMU documentation build configuration file for the 'specs' manual.
|
||||
#
|
||||
# This includes the top level conf file and then makes any necessary tweaks.
|
||||
import sys
|
||||
import os
|
||||
|
||||
qemu_docdir = os.path.abspath("..")
|
||||
parent_config = os.path.join(qemu_docdir, "conf.py")
|
||||
exec(compile(open(parent_config, "rb").read(), parent_config, 'exec'))
|
||||
|
||||
# This slightly misuses the 'description', but is the best way to get
|
||||
# the manual title to appear in the sidebar.
|
||||
html_theme_options['description'] = \
|
||||
u'System Emulation Guest Hardware Specifications'
|
||||
@ -1,28 +0,0 @@
|
||||
# -*- coding: utf-8 -*-
|
||||
#
|
||||
# QEMU documentation build configuration file for the 'system' manual.
|
||||
#
|
||||
# This includes the top level conf file and then makes any necessary tweaks.
|
||||
import sys
|
||||
import os
|
||||
|
||||
qemu_docdir = os.path.abspath("..")
|
||||
parent_config = os.path.join(qemu_docdir, "conf.py")
|
||||
exec(compile(open(parent_config, "rb").read(), parent_config, 'exec'))
|
||||
|
||||
# This slightly misuses the 'description', but is the best way to get
|
||||
# the manual title to appear in the sidebar.
|
||||
html_theme_options['description'] = u'System Emulation User''s Guide'
|
||||
|
||||
# One entry per manual page. List of tuples
|
||||
# (source start file, name, description, authors, manual section).
|
||||
man_pages = [
|
||||
('qemu-manpage', 'qemu', u'QEMU User Documentation',
|
||||
['Fabrice Bellard'], 1),
|
||||
('qemu-block-drivers', 'qemu-block-drivers',
|
||||
u'QEMU block drivers reference',
|
||||
['Fabrice Bellard and the QEMU Project developers'], 7),
|
||||
('qemu-cpu-models', 'qemu-cpu-models',
|
||||
u'QEMU CPU Models',
|
||||
['The QEMU Project developers'], 7)
|
||||
]
|
||||
@ -1,37 +0,0 @@
|
||||
# -*- coding: utf-8 -*-
|
||||
#
|
||||
# QEMU documentation build configuration file for the 'tools' manual.
|
||||
#
|
||||
# This includes the top level conf file and then makes any necessary tweaks.
|
||||
import sys
|
||||
import os
|
||||
|
||||
qemu_docdir = os.path.abspath("..")
|
||||
parent_config = os.path.join(qemu_docdir, "conf.py")
|
||||
exec(compile(open(parent_config, "rb").read(), parent_config, 'exec'))
|
||||
|
||||
# This slightly misuses the 'description', but is the best way to get
|
||||
# the manual title to appear in the sidebar.
|
||||
html_theme_options['description'] = \
|
||||
u'Tools Guide'
|
||||
|
||||
# One entry per manual page. List of tuples
|
||||
# (source start file, name, description, authors, manual section).
|
||||
man_pages = [
|
||||
('qemu-img', 'qemu-img', u'QEMU disk image utility',
|
||||
['Fabrice Bellard'], 1),
|
||||
('qemu-storage-daemon', 'qemu-storage-daemon', u'QEMU storage daemon',
|
||||
[], 1),
|
||||
('qemu-nbd', 'qemu-nbd', u'QEMU Disk Network Block Device Server',
|
||||
['Anthony Liguori <anthony@codemonkey.ws>'], 8),
|
||||
('qemu-pr-helper', 'qemu-pr-helper', 'QEMU persistent reservation helper',
|
||||
[], 8),
|
||||
('qemu-trace-stap', 'qemu-trace-stap', u'QEMU SystemTap trace tool',
|
||||
[], 1),
|
||||
('virtfs-proxy-helper', 'virtfs-proxy-helper',
|
||||
u'QEMU 9p virtfs proxy filesystem helper',
|
||||
['M. Mohan Kumar'], 1),
|
||||
('virtiofsd', 'virtiofsd', u'QEMU virtio-fs shared file system daemon',
|
||||
['Stefan Hajnoczi <stefanha@redhat.com>',
|
||||
'Masayoshi Mizuma <m.mizuma@jp.fujitsu.com>'], 1),
|
||||
]
|
||||
@ -1,15 +0,0 @@
|
||||
# -*- coding: utf-8 -*-
|
||||
#
|
||||
# QEMU documentation build configuration file for the 'user' manual.
|
||||
#
|
||||
# This includes the top level conf file and then makes any necessary tweaks.
|
||||
import sys
|
||||
import os
|
||||
|
||||
qemu_docdir = os.path.abspath("..")
|
||||
parent_config = os.path.join(qemu_docdir, "conf.py")
|
||||
exec(compile(open(parent_config, "rb").read(), parent_config, 'exec'))
|
||||
|
||||
# This slightly misuses the 'description', but is the best way to get
|
||||
# the manual title to appear in the sidebar.
|
||||
html_theme_options['description'] = u'User Mode Emulation User''s Guide'
|
||||
Loading…
Reference in New Issue
Block a user