hpet: Make number of timers configurable

One HPET block supports up to 32 timers. Allow to instantiate more than
the recommended and implemented minimum of 3. The number is configured
via the qdev property "timers". It is also saved/restored so that it
need not match between migration peers.

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
This commit is contained in:
Jan Kiszka 2010-06-13 14:15:44 +02:00 committed by Blue Swirl
parent cea1adfda7
commit be4b44c59b
2 changed files with 45 additions and 14 deletions

View File

@ -60,7 +60,8 @@ typedef struct HPETState {
uint64_t hpet_offset;
qemu_irq irqs[HPET_NUM_IRQ_ROUTES];
uint8_t rtc_irq_level;
HPETTimer timer[HPET_NUM_TIMERS];
uint8_t num_timers;
HPETTimer timer[HPET_MAX_TIMERS];
/* Memory-mapped, software visible registers */
uint64_t capability; /* capabilities */
@ -196,12 +197,25 @@ static void hpet_pre_save(void *opaque)
s->hpet_counter = hpet_get_ticks(s);
}
static int hpet_pre_load(void *opaque)
{
HPETState *s = opaque;
/* version 1 only supports 3, later versions will load the actual value */
s->num_timers = HPET_MIN_TIMERS;
return 0;
}
static int hpet_post_load(void *opaque, int version_id)
{
HPETState *s = opaque;
/* Recalculate the offset between the main counter and guest time */
s->hpet_offset = ticks_to_ns(s->hpet_counter) - qemu_get_clock(vm_clock);
/* Push number of timers into capability returned via HPET_ID */
s->capability &= ~HPET_ID_NUM_TIM_MASK;
s->capability |= (s->num_timers - 1) << HPET_ID_NUM_TIM_SHIFT;
return 0;
}
@ -224,17 +238,19 @@ static const VMStateDescription vmstate_hpet_timer = {
static const VMStateDescription vmstate_hpet = {
.name = "hpet",
.version_id = 1,
.version_id = 2,
.minimum_version_id = 1,
.minimum_version_id_old = 1,
.pre_save = hpet_pre_save,
.pre_load = hpet_pre_load,
.post_load = hpet_post_load,
.fields = (VMStateField []) {
VMSTATE_UINT64(config, HPETState),
VMSTATE_UINT64(isr, HPETState),
VMSTATE_UINT64(hpet_counter, HPETState),
VMSTATE_STRUCT_ARRAY(timer, HPETState, HPET_NUM_TIMERS, 0,
vmstate_hpet_timer, HPETTimer),
VMSTATE_UINT8_V(num_timers, HPETState, 2),
VMSTATE_STRUCT_VARRAY_UINT8(timer, HPETState, num_timers, 0,
vmstate_hpet_timer, HPETTimer),
VMSTATE_END_OF_LIST()
}
};
@ -330,7 +346,7 @@ static uint32_t hpet_ram_readl(void *opaque, target_phys_addr_t addr)
uint8_t timer_id = (addr - 0x100) / 0x20;
HPETTimer *timer = &s->timer[timer_id];
if (timer_id > HPET_NUM_TIMERS - 1) {
if (timer_id > s->num_timers) {
DPRINTF("qemu: timer id out of range\n");
return 0;
}
@ -421,7 +437,7 @@ static void hpet_ram_writel(void *opaque, target_phys_addr_t addr,
HPETTimer *timer = &s->timer[timer_id];
DPRINTF("qemu: hpet_ram_writel timer_id = %#x \n", timer_id);
if (timer_id > HPET_NUM_TIMERS - 1) {
if (timer_id > s->num_timers) {
DPRINTF("qemu: timer id out of range\n");
return;
}
@ -504,7 +520,7 @@ static void hpet_ram_writel(void *opaque, target_phys_addr_t addr,
/* Enable main counter and interrupt generation. */
s->hpet_offset =
ticks_to_ns(s->hpet_counter) - qemu_get_clock(vm_clock);
for (i = 0; i < HPET_NUM_TIMERS; i++) {
for (i = 0; i < s->num_timers; i++) {
if ((&s->timer[i])->cmp != ~0ULL) {
hpet_set_timer(&s->timer[i]);
}
@ -512,7 +528,7 @@ static void hpet_ram_writel(void *opaque, target_phys_addr_t addr,
} else if (deactivating_bit(old_val, new_val, HPET_CFG_ENABLE)) {
/* Halt main counter and disable interrupt generation. */
s->hpet_counter = hpet_get_ticks(s);
for (i = 0; i < HPET_NUM_TIMERS; i++) {
for (i = 0; i < s->num_timers; i++) {
hpet_del_timer(&s->timer[i]);
}
}
@ -530,7 +546,7 @@ static void hpet_ram_writel(void *opaque, target_phys_addr_t addr,
break;
case HPET_STATUS:
val = new_val & s->isr;
for (i = 0; i < HPET_NUM_TIMERS; i++) {
for (i = 0; i < s->num_timers; i++) {
if (val & (1 << i)) {
update_irq(&s->timer[i], 0);
}
@ -589,7 +605,7 @@ static void hpet_reset(DeviceState *d)
int i;
static int count = 0;
for (i = 0; i < HPET_NUM_TIMERS; i++) {
for (i = 0; i < s->num_timers; i++) {
HPETTimer *timer = &s->timer[i];
hpet_del_timer(timer);
@ -603,8 +619,9 @@ static void hpet_reset(DeviceState *d)
s->hpet_counter = 0ULL;
s->hpet_offset = 0ULL;
/* 64-bit main counter; 3 timers supported; LegacyReplacementRoute. */
s->capability = 0x8086a201ULL;
/* 64-bit main counter; LegacyReplacementRoute. */
s->capability = 0x8086a001ULL;
s->capability |= (s->num_timers - 1) << HPET_ID_NUM_TIM_SHIFT;
s->capability |= ((HPET_CLK_PERIOD) << 32);
s->config = 0ULL;
if (count > 0) {
@ -637,7 +654,13 @@ static int hpet_init(SysBusDevice *dev)
for (i = 0; i < HPET_NUM_IRQ_ROUTES; i++) {
sysbus_init_irq(dev, &s->irqs[i]);
}
for (i = 0; i < HPET_NUM_TIMERS; i++) {
if (s->num_timers < HPET_MIN_TIMERS) {
s->num_timers = HPET_MIN_TIMERS;
} else if (s->num_timers > HPET_MAX_TIMERS) {
s->num_timers = HPET_MAX_TIMERS;
}
for (i = 0; i < HPET_MAX_TIMERS; i++) {
timer = &s->timer[i];
timer->qemu_timer = qemu_new_timer(vm_clock, hpet_timer, timer);
timer->tn = i;
@ -661,6 +684,10 @@ static SysBusDeviceInfo hpet_device_info = {
.qdev.vmsd = &vmstate_hpet,
.qdev.reset = hpet_reset,
.init = hpet_init,
.qdev.props = (Property[]) {
DEFINE_PROP_UINT8("timers", HPETState, num_timers, HPET_MIN_TIMERS),
DEFINE_PROP_END_OF_LIST(),
},
};
static void hpet_register_device(void)

View File

@ -17,7 +17,8 @@
#define HPET_CLK_PERIOD 10000000ULL /* 10000000 femtoseconds == 10ns*/
#define FS_PER_NS 1000000
#define HPET_NUM_TIMERS 3
#define HPET_MIN_TIMERS 3
#define HPET_MAX_TIMERS 32
#define HPET_NUM_IRQ_ROUTES 32
@ -34,6 +35,9 @@
#define HPET_TN_ROUTE 0x010
#define HPET_CFG_WRITE_MASK 0x3
#define HPET_ID_NUM_TIM_SHIFT 8
#define HPET_ID_NUM_TIM_MASK 0x1f00
#define HPET_TN_TYPE_LEVEL 0x002
#define HPET_TN_ENABLE 0x004
#define HPET_TN_PERIODIC 0x008