vl.c: Replace fprintf(stderr) with error_report()
Straightforward replacement, except for qemu_kill_report(), which printed a common part of its error message first, then the applicable special part. Print each complete message with a single error_report() instead. Multi-line messages were replaced by error_report() followed by error_printf(). The following changes were made to the error messages: * The "invalid date format" message was reworded to better fit the new error_report()+error_printf() pattern. * On the remaining messages, only the trailing newlines, "qemu:" and "error:" message prefixes were removed. Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Message-Id: <1446217682-24421-2-git-send-email-ehabkost@redhat.com> [Squashed in Message-Id: <1446217682-24421-3-git-send-email-ehabkost@redhat.com> and updated commit message] Signed-off-by: Markus Armbruster <armbru@redhat.com>
This commit is contained in:
Eduardo Habkost
Markus Armbruster
parent
3d861a0109
commit
f61eddcb2b
237
vl.c
237
vl.c
|
|
@ -674,9 +674,9 @@ void runstate_set(RunState new_state)
|
|||
assert(new_state < RUN_STATE_MAX);
|
||||
|
||||
if (!runstate_valid_transitions[current_run_state][new_state]) {
|
||||
fprintf(stderr, "ERROR: invalid runstate transition: '%s' -> '%s'\n",
|
||||
RunState_lookup[current_run_state],
|
||||
RunState_lookup[new_state]);
|
||||
error_report("invalid runstate transition: '%s' -> '%s'",
|
||||
RunState_lookup[current_run_state],
|
||||
RunState_lookup[new_state]);
|
||||
abort();
|
||||
}
|
||||
trace_runstate_set(new_state);
|
||||
|
|
@ -828,8 +828,9 @@ static void configure_rtc_date_offset(const char *startdate, int legacy)
|
|||
rtc_start_date = mktimegm(&tm);
|
||||
if (rtc_start_date == -1) {
|
||||
date_fail:
|
||||
fprintf(stderr, "Invalid date format. Valid formats are:\n"
|
||||
"'2006-06-17T16:01:21' or '2006-06-17'\n");
|
||||
error_report("invalid date format");
|
||||
error_printf("valid formats: "
|
||||
"'2006-06-17T16:01:21' or '2006-06-17'\n");
|
||||
exit(1);
|
||||
}
|
||||
rtc_date_offset = qemu_time() - rtc_start_date;
|
||||
|
|
@ -859,7 +860,7 @@ static void configure_rtc(QemuOpts *opts)
|
|||
} else if (!strcmp(value, "vm")) {
|
||||
rtc_clock = QEMU_CLOCK_VIRTUAL;
|
||||
} else {
|
||||
fprintf(stderr, "qemu: invalid option value '%s'\n", value);
|
||||
error_report("invalid option value '%s'", value);
|
||||
exit(1);
|
||||
}
|
||||
}
|
||||
|
|
@ -879,7 +880,7 @@ static void configure_rtc(QemuOpts *opts)
|
|||
} else if (!strcmp(value, "none")) {
|
||||
/* discard is default */
|
||||
} else {
|
||||
fprintf(stderr, "qemu: invalid option value '%s'\n", value);
|
||||
error_report("invalid option value '%s'", value);
|
||||
exit(1);
|
||||
}
|
||||
}
|
||||
|
|
@ -905,7 +906,7 @@ static int bt_hci_parse(const char *str)
|
|||
bdaddr_t bdaddr;
|
||||
|
||||
if (nb_hcis >= MAX_NICS) {
|
||||
fprintf(stderr, "qemu: Too many bluetooth HCIs (max %i).\n", MAX_NICS);
|
||||
error_report("Too many bluetooth HCIs (max %i).", MAX_NICS);
|
||||
return -1;
|
||||
}
|
||||
|
||||
|
|
@ -931,8 +932,8 @@ static void bt_vhci_add(int vlan_id)
|
|||
struct bt_scatternet_s *vlan = qemu_find_bt_vlan(vlan_id);
|
||||
|
||||
if (!vlan->slave)
|
||||
fprintf(stderr, "qemu: warning: adding a VHCI to "
|
||||
"an empty scatternet %i\n", vlan_id);
|
||||
error_report("warning: adding a VHCI to an empty scatternet %i",
|
||||
vlan_id);
|
||||
|
||||
bt_vhci_init(bt_new_hci(vlan));
|
||||
}
|
||||
|
|
@ -950,7 +951,7 @@ static struct bt_device_s *bt_device_add(const char *opt)
|
|||
if (endp) {
|
||||
vlan_id = strtol(endp + 6, &endp, 0);
|
||||
if (*endp) {
|
||||
fprintf(stderr, "qemu: unrecognised bluetooth vlan Id\n");
|
||||
error_report("unrecognised bluetooth vlan Id");
|
||||
return 0;
|
||||
}
|
||||
}
|
||||
|
|
@ -958,13 +959,13 @@ static struct bt_device_s *bt_device_add(const char *opt)
|
|||
vlan = qemu_find_bt_vlan(vlan_id);
|
||||
|
||||
if (!vlan->slave)
|
||||
fprintf(stderr, "qemu: warning: adding a slave device to "
|
||||
"an empty scatternet %i\n", vlan_id);
|
||||
error_report("warning: adding a slave device to an empty scatternet %i",
|
||||
vlan_id);
|
||||
|
||||
if (!strcmp(devname, "keyboard"))
|
||||
return bt_keyboard_init(vlan);
|
||||
|
||||
fprintf(stderr, "qemu: unsupported bluetooth device `%s'\n", devname);
|
||||
error_report("unsupported bluetooth device `%s'", devname);
|
||||
return 0;
|
||||
}
|
||||
|
||||
|
|
@ -987,11 +988,11 @@ static int bt_parse(const char *opt)
|
|||
if (strstart(endp, ",vlan=", &p)) {
|
||||
vlan = strtol(p, (char **) &endp, 0);
|
||||
if (*endp) {
|
||||
fprintf(stderr, "qemu: bad scatternet '%s'\n", p);
|
||||
error_report("bad scatternet '%s'", p);
|
||||
return 1;
|
||||
}
|
||||
} else {
|
||||
fprintf(stderr, "qemu: bad parameter '%s'\n", endp + 1);
|
||||
error_report("bad parameter '%s'", endp + 1);
|
||||
return 1;
|
||||
}
|
||||
} else
|
||||
|
|
@ -1003,7 +1004,7 @@ static int bt_parse(const char *opt)
|
|||
} else if (strstart(opt, "device:", &endp))
|
||||
return !bt_device_add(endp);
|
||||
|
||||
fprintf(stderr, "qemu: bad bluetooth parameter '%s'\n", opt);
|
||||
error_report("bad bluetooth parameter '%s'", opt);
|
||||
return 1;
|
||||
}
|
||||
|
||||
|
|
@ -1220,18 +1221,19 @@ static void smp_parse(QemuOpts *opts)
|
|||
} else if (threads == 0) {
|
||||
threads = cpus / (cores * sockets);
|
||||
} else if (sockets * cores * threads < cpus) {
|
||||
fprintf(stderr, "cpu topology: error: "
|
||||
"sockets (%u) * cores (%u) * threads (%u) < "
|
||||
"smp_cpus (%u)\n",
|
||||
sockets, cores, threads, cpus);
|
||||
error_report("cpu topology: "
|
||||
"sockets (%u) * cores (%u) * threads (%u) < "
|
||||
"smp_cpus (%u)",
|
||||
sockets, cores, threads, cpus);
|
||||
exit(1);
|
||||
}
|
||||
|
||||
max_cpus = qemu_opt_get_number(opts, "maxcpus", cpus);
|
||||
if (sockets * cores * threads > max_cpus) {
|
||||
fprintf(stderr, "cpu topology: error: "
|
||||
"sockets (%u) * cores (%u) * threads (%u) > maxcpus (%u)\n",
|
||||
sockets, cores, threads, max_cpus);
|
||||
error_report("cpu topology: "
|
||||
"sockets (%u) * cores (%u) * threads (%u) > "
|
||||
"maxcpus (%u)",
|
||||
sockets, cores, threads, max_cpus);
|
||||
exit(1);
|
||||
}
|
||||
|
||||
|
|
@ -1246,11 +1248,11 @@ static void smp_parse(QemuOpts *opts)
|
|||
}
|
||||
|
||||
if (max_cpus > MAX_CPUMASK_BITS) {
|
||||
fprintf(stderr, "Unsupported number of maxcpus\n");
|
||||
error_report("Unsupported number of maxcpus");
|
||||
exit(1);
|
||||
}
|
||||
if (max_cpus < smp_cpus) {
|
||||
fprintf(stderr, "maxcpus must be equal to or greater than smp\n");
|
||||
error_report("maxcpus must be equal to or greater than smp");
|
||||
exit(1);
|
||||
}
|
||||
|
||||
|
|
@ -1260,7 +1262,7 @@ static void realtime_init(void)
|
|||
{
|
||||
if (enable_mlock) {
|
||||
if (os_mlock() < 0) {
|
||||
fprintf(stderr, "qemu: locking memory failed\n");
|
||||
error_report("locking memory failed");
|
||||
exit(1);
|
||||
}
|
||||
}
|
||||
|
|
@ -1414,7 +1416,7 @@ static int usb_parse(const char *cmdline)
|
|||
int r;
|
||||
r = usb_device_add(cmdline);
|
||||
if (r < 0) {
|
||||
fprintf(stderr, "qemu: could not add USB device '%s'\n", cmdline);
|
||||
error_report("could not add USB device '%s'", cmdline);
|
||||
}
|
||||
return r;
|
||||
}
|
||||
|
|
@ -1624,14 +1626,14 @@ static int qemu_shutdown_requested(void)
|
|||
static void qemu_kill_report(void)
|
||||
{
|
||||
if (!qtest_driver() && shutdown_signal != -1) {
|
||||
fprintf(stderr, "qemu: terminating on signal %d", shutdown_signal);
|
||||
if (shutdown_pid == 0) {
|
||||
/* This happens for eg ^C at the terminal, so it's worth
|
||||
* avoiding printing an odd message in that case.
|
||||
*/
|
||||
fputc('\n', stderr);
|
||||
error_report("terminating on signal %d", shutdown_signal);
|
||||
} else {
|
||||
fprintf(stderr, " from pid " FMT_pid "\n", shutdown_pid);
|
||||
error_report("terminating on signal %d from pid " FMT_pid,
|
||||
shutdown_signal, shutdown_pid);
|
||||
}
|
||||
shutdown_signal = -1;
|
||||
}
|
||||
|
|
@ -1980,28 +1982,28 @@ static void select_vgahw (const char *p)
|
|||
if (vga_available()) {
|
||||
vga_interface_type = VGA_STD;
|
||||
} else {
|
||||
fprintf(stderr, "Error: standard VGA not available\n");
|
||||
error_report("standard VGA not available");
|
||||
exit(0);
|
||||
}
|
||||
} else if (strstart(p, "cirrus", &opts)) {
|
||||
if (cirrus_vga_available()) {
|
||||
vga_interface_type = VGA_CIRRUS;
|
||||
} else {
|
||||
fprintf(stderr, "Error: Cirrus VGA not available\n");
|
||||
error_report("Cirrus VGA not available");
|
||||
exit(0);
|
||||
}
|
||||
} else if (strstart(p, "vmware", &opts)) {
|
||||
if (vmware_vga_available()) {
|
||||
vga_interface_type = VGA_VMWARE;
|
||||
} else {
|
||||
fprintf(stderr, "Error: VMWare SVGA not available\n");
|
||||
error_report("VMWare SVGA not available");
|
||||
exit(0);
|
||||
}
|
||||
} else if (strstart(p, "virtio", &opts)) {
|
||||
if (virtio_vga_available()) {
|
||||
vga_interface_type = VGA_VIRTIO;
|
||||
} else {
|
||||
fprintf(stderr, "Error: Virtio VGA not available\n");
|
||||
error_report("Virtio VGA not available");
|
||||
exit(0);
|
||||
}
|
||||
} else if (strstart(p, "xenfb", &opts)) {
|
||||
|
|
@ -2010,26 +2012,26 @@ static void select_vgahw (const char *p)
|
|||
if (qxl_vga_available()) {
|
||||
vga_interface_type = VGA_QXL;
|
||||
} else {
|
||||
fprintf(stderr, "Error: QXL VGA not available\n");
|
||||
error_report("QXL VGA not available");
|
||||
exit(0);
|
||||
}
|
||||
} else if (strstart(p, "tcx", &opts)) {
|
||||
if (tcx_vga_available()) {
|
||||
vga_interface_type = VGA_TCX;
|
||||
} else {
|
||||
fprintf(stderr, "Error: TCX framebuffer not available\n");
|
||||
error_report("TCX framebuffer not available");
|
||||
exit(0);
|
||||
}
|
||||
} else if (strstart(p, "cg3", &opts)) {
|
||||
if (cg3_vga_available()) {
|
||||
vga_interface_type = VGA_CG3;
|
||||
} else {
|
||||
fprintf(stderr, "Error: CG3 framebuffer not available\n");
|
||||
error_report("CG3 framebuffer not available");
|
||||
exit(0);
|
||||
}
|
||||
} else if (!strstart(p, "none", &opts)) {
|
||||
invalid_vga:
|
||||
fprintf(stderr, "Unknown vga type: %s\n", p);
|
||||
error_report("Unknown vga type: %s", p);
|
||||
exit(1);
|
||||
}
|
||||
while (*opts) {
|
||||
|
|
@ -2349,7 +2351,7 @@ static int mon_init_func(void *opaque, QemuOpts *opts, Error **errp)
|
|||
} else if (strcmp(mode, "control") == 0) {
|
||||
flags = MONITOR_USE_CONTROL;
|
||||
} else {
|
||||
fprintf(stderr, "unknown monitor mode \"%s\"\n", mode);
|
||||
error_report("unknown monitor mode \"%s\"", mode);
|
||||
exit(1);
|
||||
}
|
||||
|
||||
|
|
@ -2362,7 +2364,7 @@ static int mon_init_func(void *opaque, QemuOpts *opts, Error **errp)
|
|||
chardev = qemu_opt_get(opts, "chardev");
|
||||
chr = qemu_chr_find(chardev);
|
||||
if (chr == NULL) {
|
||||
fprintf(stderr, "chardev \"%s\" not found\n", chardev);
|
||||
error_report("chardev \"%s\" not found", chardev);
|
||||
exit(1);
|
||||
}
|
||||
|
||||
|
|
@ -2390,7 +2392,7 @@ static void monitor_parse(const char *optarg, const char *mode, bool pretty)
|
|||
}
|
||||
opts = qemu_chr_parse_compat(label, optarg);
|
||||
if (!opts) {
|
||||
fprintf(stderr, "parse error: %s\n", optarg);
|
||||
error_report("parse error: %s", optarg);
|
||||
exit(1);
|
||||
}
|
||||
}
|
||||
|
|
@ -2464,14 +2466,14 @@ static int serial_parse(const char *devname)
|
|||
if (strcmp(devname, "none") == 0)
|
||||
return 0;
|
||||
if (index == MAX_SERIAL_PORTS) {
|
||||
fprintf(stderr, "qemu: too many serial ports\n");
|
||||
error_report("too many serial ports");
|
||||
exit(1);
|
||||
}
|
||||
snprintf(label, sizeof(label), "serial%d", index);
|
||||
serial_hds[index] = qemu_chr_new(label, devname, NULL);
|
||||
if (!serial_hds[index]) {
|
||||
fprintf(stderr, "qemu: could not connect serial device"
|
||||
" to character backend '%s'\n", devname);
|
||||
error_report("could not connect serial device"
|
||||
" to character backend '%s'", devname);
|
||||
return -1;
|
||||
}
|
||||
index++;
|
||||
|
|
@ -2486,14 +2488,14 @@ static int parallel_parse(const char *devname)
|
|||
if (strcmp(devname, "none") == 0)
|
||||
return 0;
|
||||
if (index == MAX_PARALLEL_PORTS) {
|
||||
fprintf(stderr, "qemu: too many parallel ports\n");
|
||||
error_report("too many parallel ports");
|
||||
exit(1);
|
||||
}
|
||||
snprintf(label, sizeof(label), "parallel%d", index);
|
||||
parallel_hds[index] = qemu_chr_new(label, devname, NULL);
|
||||
if (!parallel_hds[index]) {
|
||||
fprintf(stderr, "qemu: could not connect parallel device"
|
||||
" to character backend '%s'\n", devname);
|
||||
error_report("could not connect parallel device"
|
||||
" to character backend '%s'", devname);
|
||||
return -1;
|
||||
}
|
||||
index++;
|
||||
|
|
@ -2510,7 +2512,7 @@ static int virtcon_parse(const char *devname)
|
|||
if (strcmp(devname, "none") == 0)
|
||||
return 0;
|
||||
if (index == MAX_VIRTIO_CONSOLES) {
|
||||
fprintf(stderr, "qemu: too many virtio consoles\n");
|
||||
error_report("too many virtio consoles");
|
||||
exit(1);
|
||||
}
|
||||
|
||||
|
|
@ -2527,8 +2529,8 @@ static int virtcon_parse(const char *devname)
|
|||
snprintf(label, sizeof(label), "virtcon%d", index);
|
||||
virtcon_hds[index] = qemu_chr_new(label, devname, NULL);
|
||||
if (!virtcon_hds[index]) {
|
||||
fprintf(stderr, "qemu: could not connect virtio console"
|
||||
" to character backend '%s'\n", devname);
|
||||
error_report("could not connect virtio console"
|
||||
" to character backend '%s'", devname);
|
||||
return -1;
|
||||
}
|
||||
qemu_opt_set(dev_opts, "chardev", label, &error_abort);
|
||||
|
|
@ -2548,7 +2550,7 @@ static int sclp_parse(const char *devname)
|
|||
return 0;
|
||||
}
|
||||
if (index == MAX_SCLP_CONSOLES) {
|
||||
fprintf(stderr, "qemu: too many sclp consoles\n");
|
||||
error_report("too many sclp consoles");
|
||||
exit(1);
|
||||
}
|
||||
|
||||
|
|
@ -2560,8 +2562,8 @@ static int sclp_parse(const char *devname)
|
|||
snprintf(label, sizeof(label), "sclpcon%d", index);
|
||||
sclp_hds[index] = qemu_chr_new(label, devname, NULL);
|
||||
if (!sclp_hds[index]) {
|
||||
fprintf(stderr, "qemu: could not connect sclp console"
|
||||
" to character backend '%s'\n", devname);
|
||||
error_report("could not connect sclp console"
|
||||
" to character backend '%s'", devname);
|
||||
return -1;
|
||||
}
|
||||
qemu_opt_set(dev_opts, "chardev", label, &error_abort);
|
||||
|
|
@ -2579,7 +2581,7 @@ static int debugcon_parse(const char *devname)
|
|||
}
|
||||
opts = qemu_opts_create(qemu_find_opts("device"), "debugcon", 1, NULL);
|
||||
if (!opts) {
|
||||
fprintf(stderr, "qemu: already have a debugcon device\n");
|
||||
error_report("already have a debugcon device");
|
||||
exit(1);
|
||||
}
|
||||
qemu_opt_set(opts, "driver", "isa-debugcon", &error_abort);
|
||||
|
|
@ -3010,8 +3012,7 @@ int main(int argc, char **argv, char **envp)
|
|||
runstate_init();
|
||||
|
||||
if (qcrypto_init(&err) < 0) {
|
||||
fprintf(stderr, "Cannot initialize crypto: %s\n",
|
||||
error_get_pretty(err));
|
||||
error_report("Cannot initialize crypto: %s", error_get_pretty(err));
|
||||
exit(1);
|
||||
}
|
||||
rtc_clock = QEMU_CLOCK_HOST;
|
||||
|
|
@ -3169,7 +3170,7 @@ int main(int argc, char **argv, char **envp)
|
|||
}
|
||||
} else if (*p != '\0') {
|
||||
chs_fail:
|
||||
fprintf(stderr, "qemu: invalid physical CHS format\n");
|
||||
error_report("invalid physical CHS format");
|
||||
exit(1);
|
||||
}
|
||||
if (hda_opts != NULL) {
|
||||
|
|
@ -3212,7 +3213,7 @@ int main(int argc, char **argv, char **envp)
|
|||
#ifdef CONFIG_CURSES
|
||||
display_type = DT_CURSES;
|
||||
#else
|
||||
fprintf(stderr, "Curses support is disabled\n");
|
||||
error_report("Curses support is disabled");
|
||||
exit(1);
|
||||
#endif
|
||||
break;
|
||||
|
|
@ -3223,8 +3224,7 @@ int main(int argc, char **argv, char **envp)
|
|||
graphic_rotate = strtol(optarg, (char **) &optarg, 10);
|
||||
if (graphic_rotate != 0 && graphic_rotate != 90 &&
|
||||
graphic_rotate != 180 && graphic_rotate != 270) {
|
||||
fprintf(stderr,
|
||||
"qemu: only 90, 180, 270 deg rotation is available\n");
|
||||
error_report("only 90, 180, 270 deg rotation is available");
|
||||
exit(1);
|
||||
}
|
||||
break;
|
||||
|
|
@ -3375,7 +3375,7 @@ int main(int argc, char **argv, char **envp)
|
|||
w = strtol(p, (char **)&p, 10);
|
||||
if (w <= 0) {
|
||||
graphic_error:
|
||||
fprintf(stderr, "qemu: invalid resolution or depth\n");
|
||||
error_report("invalid resolution or depth");
|
||||
exit(1);
|
||||
}
|
||||
if (*p != 'x')
|
||||
|
|
@ -3441,7 +3441,7 @@ int main(int argc, char **argv, char **envp)
|
|||
case QEMU_OPTION_fsdev:
|
||||
olist = qemu_find_opts("fsdev");
|
||||
if (!olist) {
|
||||
fprintf(stderr, "fsdev is not supported by this qemu build.\n");
|
||||
error_report("fsdev is not supported by this qemu build.");
|
||||
exit(1);
|
||||
}
|
||||
opts = qemu_opts_parse_noisily(olist, optarg, true);
|
||||
|
|
@ -3456,7 +3456,7 @@ int main(int argc, char **argv, char **envp)
|
|||
|
||||
olist = qemu_find_opts("virtfs");
|
||||
if (!olist) {
|
||||
fprintf(stderr, "virtfs is not supported by this qemu build.\n");
|
||||
error_report("virtfs is not supported by this qemu build.");
|
||||
exit(1);
|
||||
}
|
||||
opts = qemu_opts_parse_noisily(olist, optarg, true);
|
||||
|
|
@ -3466,15 +3466,15 @@ int main(int argc, char **argv, char **envp)
|
|||
|
||||
if (qemu_opt_get(opts, "fsdriver") == NULL ||
|
||||
qemu_opt_get(opts, "mount_tag") == NULL) {
|
||||
fprintf(stderr, "Usage: -virtfs fsdriver,mount_tag=tag.\n");
|
||||
error_report("Usage: -virtfs fsdriver,mount_tag=tag.");
|
||||
exit(1);
|
||||
}
|
||||
fsdev = qemu_opts_create(qemu_find_opts("fsdev"),
|
||||
qemu_opt_get(opts, "mount_tag"),
|
||||
1, NULL);
|
||||
if (!fsdev) {
|
||||
fprintf(stderr, "duplicate fsdev id: %s\n",
|
||||
qemu_opt_get(opts, "mount_tag"));
|
||||
error_report("duplicate fsdev id: %s",
|
||||
qemu_opt_get(opts, "mount_tag"));
|
||||
exit(1);
|
||||
}
|
||||
|
||||
|
|
@ -3483,8 +3483,8 @@ int main(int argc, char **argv, char **envp)
|
|||
#ifdef CONFIG_SYNC_FILE_RANGE
|
||||
qemu_opt_set(fsdev, "writeout", writeout, &error_abort);
|
||||
#else
|
||||
fprintf(stderr, "writeout=immediate not supported on "
|
||||
"this platform\n");
|
||||
error_report("writeout=immediate not supported "
|
||||
"on this platform");
|
||||
exit(1);
|
||||
#endif
|
||||
}
|
||||
|
|
@ -3523,7 +3523,7 @@ int main(int argc, char **argv, char **envp)
|
|||
fsdev = qemu_opts_create(qemu_find_opts("fsdev"), "v_synth",
|
||||
1, NULL);
|
||||
if (!fsdev) {
|
||||
fprintf(stderr, "duplicate option: %s\n", "virtfs_synth");
|
||||
error_report("duplicate option: %s", "virtfs_synth");
|
||||
exit(1);
|
||||
}
|
||||
qemu_opt_set(fsdev, "fsdriver", "synth", &error_abort);
|
||||
|
|
@ -3544,15 +3544,14 @@ int main(int argc, char **argv, char **envp)
|
|||
break;
|
||||
case QEMU_OPTION_watchdog:
|
||||
if (watchdog) {
|
||||
fprintf(stderr,
|
||||
"qemu: only one watchdog option may be given\n");
|
||||
error_report("only one watchdog option may be given");
|
||||
return 1;
|
||||
}
|
||||
watchdog = optarg;
|
||||
break;
|
||||
case QEMU_OPTION_watchdog_action:
|
||||
if (select_watchdog_action(optarg) == -1) {
|
||||
fprintf(stderr, "Unknown -watchdog-action parameter\n");
|
||||
error_report("Unknown -watchdog-action parameter");
|
||||
exit(1);
|
||||
}
|
||||
break;
|
||||
|
|
@ -3596,7 +3595,7 @@ int main(int argc, char **argv, char **envp)
|
|||
display_type = DT_SDL;
|
||||
break;
|
||||
#else
|
||||
fprintf(stderr, "SDL support is disabled\n");
|
||||
error_report("SDL support is disabled");
|
||||
exit(1);
|
||||
#endif
|
||||
case QEMU_OPTION_pidfile:
|
||||
|
|
@ -3658,8 +3657,8 @@ int main(int argc, char **argv, char **envp)
|
|||
qemu_opts_parse_noisily(olist, "accel=tcg", false);
|
||||
break;
|
||||
case QEMU_OPTION_no_kvm_pit: {
|
||||
fprintf(stderr, "Warning: KVM PIT can no longer be disabled "
|
||||
"separately.\n");
|
||||
error_report("Warning: KVM PIT can no longer be disabled "
|
||||
"separately.");
|
||||
break;
|
||||
}
|
||||
case QEMU_OPTION_no_kvm_pit_reinjection: {
|
||||
|
|
@ -3672,8 +3671,8 @@ int main(int argc, char **argv, char **envp)
|
|||
{ /* end of list */ }
|
||||
};
|
||||
|
||||
fprintf(stderr, "Warning: option deprecated, use "
|
||||
"lost_tick_policy property of kvm-pit instead.\n");
|
||||
error_report("Warning: option deprecated, use "
|
||||
"lost_tick_policy property of kvm-pit instead.");
|
||||
qdev_prop_register_global_list(kvm_pit_lost_tick_policy);
|
||||
break;
|
||||
}
|
||||
|
|
@ -3708,7 +3707,7 @@ int main(int argc, char **argv, char **envp)
|
|||
exit(1);
|
||||
}
|
||||
#else
|
||||
fprintf(stderr, "VNC support is disabled\n");
|
||||
error_report("VNC support is disabled");
|
||||
exit(1);
|
||||
#endif
|
||||
break;
|
||||
|
|
@ -3721,7 +3720,7 @@ int main(int argc, char **argv, char **envp)
|
|||
break;
|
||||
case QEMU_OPTION_balloon:
|
||||
if (balloon_parse(optarg) < 0) {
|
||||
fprintf(stderr, "Unknown -balloon argument %s\n", optarg);
|
||||
error_report("Unknown -balloon argument %s", optarg);
|
||||
exit(1);
|
||||
}
|
||||
break;
|
||||
|
|
@ -3736,15 +3735,15 @@ int main(int argc, char **argv, char **envp)
|
|||
break;
|
||||
case QEMU_OPTION_uuid:
|
||||
if(qemu_uuid_parse(optarg, qemu_uuid) < 0) {
|
||||
fprintf(stderr, "Fail to parse UUID string."
|
||||
" Wrong format.\n");
|
||||
error_report("Fail to parse UUID string."
|
||||
" Wrong format.");
|
||||
exit(1);
|
||||
}
|
||||
qemu_uuid_set = true;
|
||||
break;
|
||||
case QEMU_OPTION_option_rom:
|
||||
if (nb_option_roms >= MAX_OPTION_ROMS) {
|
||||
fprintf(stderr, "Too many option ROMs\n");
|
||||
error_report("Too many option ROMs");
|
||||
exit(1);
|
||||
}
|
||||
opts = qemu_opts_parse_noisily(qemu_find_opts("option-rom"),
|
||||
|
|
@ -3756,7 +3755,7 @@ int main(int argc, char **argv, char **envp)
|
|||
option_rom[nb_option_roms].bootindex =
|
||||
qemu_opt_get_number(opts, "bootindex", -1);
|
||||
if (!option_rom[nb_option_roms].name) {
|
||||
fprintf(stderr, "Option ROM file is not specified\n");
|
||||
error_report("Option ROM file is not specified");
|
||||
exit(1);
|
||||
}
|
||||
nb_option_roms++;
|
||||
|
|
@ -3781,9 +3780,8 @@ int main(int argc, char **argv, char **envp)
|
|||
} else if (strcmp("auto", target) == 0) {
|
||||
semihosting.target = SEMIHOSTING_TARGET_AUTO;
|
||||
} else {
|
||||
fprintf(stderr, "Unsupported semihosting-config"
|
||||
" %s\n",
|
||||
optarg);
|
||||
error_report("Unsupported semihosting-config %s",
|
||||
optarg);
|
||||
exit(1);
|
||||
}
|
||||
} else {
|
||||
|
|
@ -3793,14 +3791,14 @@ int main(int argc, char **argv, char **envp)
|
|||
qemu_opt_foreach(opts, add_semihosting_arg,
|
||||
&semihosting, NULL);
|
||||
} else {
|
||||
fprintf(stderr, "Unsupported semihosting-config %s\n",
|
||||
optarg);
|
||||
error_report("Unsupported semihosting-config %s",
|
||||
optarg);
|
||||
exit(1);
|
||||
}
|
||||
break;
|
||||
case QEMU_OPTION_tdf:
|
||||
fprintf(stderr, "Warning: user space PIT time drift fix "
|
||||
"is no longer supported.\n");
|
||||
error_report("Warning: user space PIT time drift fix "
|
||||
"is no longer supported.");
|
||||
break;
|
||||
case QEMU_OPTION_name:
|
||||
opts = qemu_opts_parse_noisily(qemu_find_opts("name"),
|
||||
|
|
@ -3811,7 +3809,7 @@ int main(int argc, char **argv, char **envp)
|
|||
break;
|
||||
case QEMU_OPTION_prom_env:
|
||||
if (nb_prom_envs >= MAX_PROM_ENVS) {
|
||||
fprintf(stderr, "Too many prom variables\n");
|
||||
error_report("Too many prom variables");
|
||||
exit(1);
|
||||
}
|
||||
prom_envs[nb_prom_envs] = optarg;
|
||||
|
|
@ -3894,8 +3892,8 @@ int main(int argc, char **argv, char **envp)
|
|||
{
|
||||
int ret = qemu_read_config_file(optarg);
|
||||
if (ret < 0) {
|
||||
fprintf(stderr, "read config %s: %s\n", optarg,
|
||||
strerror(-ret));
|
||||
error_report("read config %s: %s", optarg,
|
||||
strerror(-ret));
|
||||
exit(1);
|
||||
}
|
||||
break;
|
||||
|
|
@ -3903,7 +3901,7 @@ int main(int argc, char **argv, char **envp)
|
|||
case QEMU_OPTION_spice:
|
||||
olist = qemu_find_opts("spice");
|
||||
if (!olist) {
|
||||
fprintf(stderr, "spice is not supported by this qemu build.\n");
|
||||
error_report("spice is not supported by this qemu build.");
|
||||
exit(1);
|
||||
}
|
||||
opts = qemu_opts_parse_noisily(olist, optarg, false);
|
||||
|
|
@ -3920,7 +3918,8 @@ int main(int argc, char **argv, char **envp)
|
|||
} else {
|
||||
fp = fopen(optarg, "w");
|
||||
if (fp == NULL) {
|
||||
fprintf(stderr, "open %s: %s\n", optarg, strerror(errno));
|
||||
error_report("open %s: %s", optarg,
|
||||
strerror(errno));
|
||||
exit(1);
|
||||
}
|
||||
}
|
||||
|
|
@ -3981,13 +3980,13 @@ int main(int argc, char **argv, char **envp)
|
|||
break;
|
||||
case QEMU_OPTION_dump_vmstate:
|
||||
if (vmstate_dump_file) {
|
||||
fprintf(stderr, "qemu: only one '-dump-vmstate' "
|
||||
"option may be given\n");
|
||||
error_report("only one '-dump-vmstate' "
|
||||
"option may be given");
|
||||
exit(1);
|
||||
}
|
||||
vmstate_dump_file = fopen(optarg, "w");
|
||||
if (vmstate_dump_file == NULL) {
|
||||
fprintf(stderr, "open %s: %s\n", optarg, strerror(errno));
|
||||
error_report("open %s: %s", optarg, strerror(errno));
|
||||
exit(1);
|
||||
}
|
||||
break;
|
||||
|
|
@ -4004,8 +4003,8 @@ int main(int argc, char **argv, char **envp)
|
|||
}
|
||||
|
||||
if (machine_class == NULL) {
|
||||
fprintf(stderr, "No machine specified, and there is no default.\n"
|
||||
"Use -machine help to list supported machines!\n");
|
||||
error_report("No machine specified, and there is no default.");
|
||||
error_printf("Use -machine help to list supported machines!\n");
|
||||
exit(1);
|
||||
}
|
||||
|
||||
|
|
@ -4106,9 +4105,9 @@ int main(int argc, char **argv, char **envp)
|
|||
|
||||
machine_class->max_cpus = machine_class->max_cpus ?: 1; /* Default to UP */
|
||||
if (max_cpus > machine_class->max_cpus) {
|
||||
fprintf(stderr, "Number of SMP CPUs requested (%d) exceeds max CPUs "
|
||||
"supported by machine '%s' (%d)\n", max_cpus,
|
||||
machine_class->name, machine_class->max_cpus);
|
||||
error_report("Number of SMP CPUs requested (%d) exceeds max CPUs "
|
||||
"supported by machine '%s' (%d)", max_cpus,
|
||||
machine_class->name, machine_class->max_cpus);
|
||||
exit(1);
|
||||
}
|
||||
|
||||
|
|
@ -4169,12 +4168,12 @@ int main(int argc, char **argv, char **envp)
|
|||
if (display_type == DT_NOGRAPHIC
|
||||
&& (default_parallel || default_serial
|
||||
|| default_monitor || default_virtcon)) {
|
||||
fprintf(stderr, "-nographic can not be used with -daemonize\n");
|
||||
error_report("-nographic can not be used with -daemonize");
|
||||
exit(1);
|
||||
}
|
||||
#ifdef CONFIG_CURSES
|
||||
if (display_type == DT_CURSES) {
|
||||
fprintf(stderr, "curses display can not be used with -daemonize\n");
|
||||
error_report("curses display can not be used with -daemonize");
|
||||
exit(1);
|
||||
}
|
||||
#endif
|
||||
|
|
@ -4233,12 +4232,12 @@ int main(int argc, char **argv, char **envp)
|
|||
}
|
||||
|
||||
if ((no_frame || alt_grab || ctrl_grab) && display_type != DT_SDL) {
|
||||
fprintf(stderr, "-no-frame, -alt-grab and -ctrl-grab are only valid "
|
||||
"for SDL, ignoring option\n");
|
||||
error_report("-no-frame, -alt-grab and -ctrl-grab are only valid "
|
||||
"for SDL, ignoring option");
|
||||
}
|
||||
if (no_quit && (display_type != DT_GTK && display_type != DT_SDL)) {
|
||||
fprintf(stderr, "-no-quit is only valid for GTK and SDL, "
|
||||
"ignoring option\n");
|
||||
error_report("-no-quit is only valid for GTK and SDL, "
|
||||
"ignoring option");
|
||||
}
|
||||
|
||||
#if defined(CONFIG_GTK)
|
||||
|
|
@ -4253,9 +4252,9 @@ int main(int argc, char **argv, char **envp)
|
|||
#endif
|
||||
if (request_opengl == 1 && display_opengl == 0) {
|
||||
#if defined(CONFIG_OPENGL)
|
||||
fprintf(stderr, "OpenGL is not supported by the display.\n");
|
||||
error_report("OpenGL is not supported by the display.");
|
||||
#else
|
||||
fprintf(stderr, "QEMU was built without opengl support.\n");
|
||||
error_report("QEMU was built without opengl support.");
|
||||
#endif
|
||||
exit(1);
|
||||
}
|
||||
|
|
@ -4281,7 +4280,7 @@ int main(int argc, char **argv, char **envp)
|
|||
#endif
|
||||
|
||||
if (pid_file && qemu_create_pidfile(pid_file) != 0) {
|
||||
fprintf(stderr, "Could not acquire pid file: %s\n", strerror(errno));
|
||||
error_report("Could not acquire pid file: %s", strerror(errno));
|
||||
exit(1);
|
||||
}
|
||||
|
||||
|
|
@ -4352,17 +4351,17 @@ int main(int argc, char **argv, char **envp)
|
|||
linux_boot = (kernel_filename != NULL);
|
||||
|
||||
if (!linux_boot && *kernel_cmdline != '\0') {
|
||||
fprintf(stderr, "-append only allowed with -kernel option\n");
|
||||
error_report("-append only allowed with -kernel option");
|
||||
exit(1);
|
||||
}
|
||||
|
||||
if (!linux_boot && initrd_filename != NULL) {
|
||||
fprintf(stderr, "-initrd only allowed with -kernel option\n");
|
||||
error_report("-initrd only allowed with -kernel option");
|
||||
exit(1);
|
||||
}
|
||||
|
||||
if (!linux_boot && qemu_opt_get(machine_opts, "dtb")) {
|
||||
fprintf(stderr, "-dtb only allowed with -kernel option\n");
|
||||
error_report("-dtb only allowed with -kernel option");
|
||||
exit(1);
|
||||
}
|
||||
|
||||
|
|
@ -4381,7 +4380,7 @@ int main(int argc, char **argv, char **envp)
|
|||
cpu_ticks_init();
|
||||
if (icount_opts) {
|
||||
if (kvm_enabled() || xen_enabled()) {
|
||||
fprintf(stderr, "-icount is not allowed with kvm or xen\n");
|
||||
error_report("-icount is not allowed with kvm or xen");
|
||||
exit(1);
|
||||
}
|
||||
configure_icount(icount_opts, &error_abort);
|
||||
|
|
@ -4414,7 +4413,7 @@ int main(int argc, char **argv, char **envp)
|
|||
if (!xen_enabled()) {
|
||||
/* On 32-bit hosts, QEMU is limited by virtual address space */
|
||||
if (ram_size > (2047 << 20) && HOST_LONG_BITS == 32) {
|
||||
fprintf(stderr, "qemu: at most 2047 MB RAM can be simulated\n");
|
||||
error_report("at most 2047 MB RAM can be simulated");
|
||||
exit(1);
|
||||
}
|
||||
}
|
||||
|
|
@ -4601,7 +4600,7 @@ int main(int argc, char **argv, char **envp)
|
|||
qemu_run_machine_init_done_notifiers();
|
||||
|
||||
if (rom_check_and_register_reset() != 0) {
|
||||
fprintf(stderr, "rom check and register reset failed\n");
|
||||
error_report("rom check and register reset failed");
|
||||
exit(1);
|
||||
}
|
||||
|
||||
|
|
|
|||
Loading…
Reference in New Issue