If not set explicitly, gitlab assumes 'when: on_success" as the
publishing criteria for artifacts. This is reasonable if the
artifact is an output deliverable of the job. This is useless
if the artifact is a log file to be used for debugging job
failures.
This change makes the desired criteria explicit for every job
that publishes artifacts.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230503145535.91325-2-berrange@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230630180423.558337-2-alex.bennee@linaro.org>
The 'stable' and 'stable-dind' tags are not documented as supported
tags at:
https://hub.docker.com/_/docker
Looking at their content they reflect docker 19.x.x release series,
were last built in Dec 2020, and have 3 critical and 20 high rated
CVEs unfixed. This obsolete status is attested by this commit:
606c63960a
The 'stable-dind' tag in particular appears buggy as it is unable to
resolve DNS for Fedora repos:
- Curl error (6): Couldn't resolve host name for https://mirrors.fedoraproject.org/metalink?repo=fedora-37&arch=x86_64&countme=1 [getaddrinfo() thread failed to start]
We used the 'stable' tag previously at the recommendation of GitLab
docs, but those docs are wrong and pending a fix:
https://gitlab.com/gitlab-org/gitlab/-/issues/409430
Fixes: 5f63a67adb
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Camilla Conte <cconte@redhat.com>
Message-Id: <20230531140654.1141145-1-berrange@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Wait for docker info to return successfuly to ensure that
the docker server (daemon) started.
This is needed for jobs running on Kubernetes.
See https://wiki.qemu.org/Testing/CI/KubernetesRunners.
Signed-off-by: Camilla Conte <cconte@redhat.com>
Message-Id: <20230522174153.46801-4-cconte@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
These are not needed when using gitlab.com shared runners.
Signed-off-by: Camilla Conte <cconte@redhat.com>
Message-Id: <20230522174153.46801-2-cconte@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Configure Gitlab CI to run on Kubernetes
according to the official documentation.
https://docs.gitlab.com/ee/ci/docker/using_docker_build.html#docker-in-docker-with-tls-enabled-in-kubernetes
These changes are needed because of the CI jobs
using Docker-in-Docker (dind).
As soon as Docker-in-Docker is replaced with Kaniko,
these changes can be reverted.
I documented what I did to set up the Kubernetes runner on the wiki:
https://wiki.qemu.org/Testing/CI/KubernetesRunners
Signed-off-by: Camilla Conte <cconte@redhat.com>
Message-Id: <20230407145252.32955-1-cconte@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The OpenSBI build has been using docker:19.03.1, which appears to be old
enough that v2 of the manifest is no longer supported. Something has
started serving us those manifests, resulting in errors along the lines
of
$ docker build --cache-from $IMAGE_TAG --tag $CI_REGISTRY_IMAGE:$CI_COMMIT_SHA --tag $IMAGE_TAG .gitlab-ci.d/opensbi
Step 1/7 : FROM ubuntu:18.04
18.04: Pulling from library/ubuntu
mediaType in manifest should be 'application/vnd.docker.distribution.manifest.v2+json' not 'application/vnd.oci.image.manifest.v1+json'
This moves to docker:stable, as was suggested by the template. It also
adds the python3 package via apt, as OpenSBI requires that to build.
Reviewed-by: Bin Meng <bmeng@tinylab.org>
Message-ID: <20230303202448.11911-2-palmer@rivosinc.com>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
To preserve contributor CI credits we don't want jobs to run by default
unless the QEMU_CI variable is set. For most jobs we can achieve this
using the base template, but the edk2/opensbi jobs are a little special
as they have some complex conditions we can't easily model in the base
template.
We duplicate existing rules and put them under control of QEMU_CI
variable, such that QEMU_CI=1 creates manual jobs and QEMU_CI=2
immediately runs jobs.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20220629170638.520630-4-berrange@redhat.com>
[thuth: Fixed "on_success" <-> "manual" copy-n-paste bug]
Signed-off-by: Thomas Huth <thuth@redhat.com>
Get rid of comments stating the obvious and re-arrange remaining
comments. The opensbi split of rules for file matches is also
merged into one rule.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220629170638.520630-3-berrange@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The edk2/opensbi gitlab CI config was using single space indents
which is not consistent with the rest of the gitlab CI config
files.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220629170638.520630-2-berrange@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Now that all RISC-V machines can use OpenSBI BIN images, we remove
OpenSBI ELF images and also exclude these images from BIOS build.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Jobs depending on another should not use the 'when: always'
condition, because if a dependency failed we should not keep
running jobs depending on it. The correct condition is
'when: on_success'.
Fixes: c6fc0fc1a7 ("gitlab-ci.yml: Add jobs to build OpenSBI firmware binaries")
Reported-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Message-Id: <20210727142431.1672530-5-philmd@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
All jobs depending on 'docker-opensbi' job must use at most all
the rules that triggers it. The simplest way to ensure that
is to always use the same rules. Extract all the rules to a
reusable section, and include this section (with the 'extends'
keyword) in both 'docker-opensbi' and 'build-opensbi' jobs.
The problem was introduced in commit c6fc0fc1a7 ("gitlab-ci.yml:
Add jobs to build OpenSBI firmware binaries"), but was revealed in
commit 91e9c47e50 ("docker: OpenSBI build job depends on OpenSBI
container").
This fix is similar to the one used with the EDK2 firmware job in
commit ac0595cf6b ("gitlab-ci: Extract EDK2 job rules to reusable
section").
Reported-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Message-Id: <20210720164829.3949558-1-philmd@redhat.com>
Message-Id: <20210720232703.10650-30-alex.bennee@linaro.org>
This updates the GitLab CI opensbi job to build opensbi bios images
for the generic platform.
Signed-off-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <1596439832-29238-7-git-send-email-bmeng.cn@gmail.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
If no stage is listed, jobs get put in an implicit "test" stage.
Some jobs which create container images to be used by later stages
are currently listed as in a "build" stages.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200622153318.751107-2-berrange@redhat.com>
Message-Id: <20200701135652.1366-21-alex.bennee@linaro.org>
The edk2.yml and opensbi.yml files have recently been moved/renamed,
but the change has not been reflected in the rules in the YML files
yet.
Fixes: 922febe2af ("Move edk2 and opensbi YAML files to .gitlab-ci.d folder")
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20200625151627.24986-1-thuth@redhat.com>
Message-Id: <20200701135652.1366-20-alex.bennee@linaro.org>
We have a dedicated folder for the gitlab-ci - so there is no need
to clutter the top directory with these .yml files.
Message-Id: <20200525131823.715-5-thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Daniel P. Berrangé
Camilla Conte
Richard Henderson
Palmer Dabbelt
Anup Patel
Philippe Mathieu-Daudé
Bin Meng
Thomas Huth