Move this option back from meson into configure for the purposes of
using the configuration value to bootstrap Sphinx in different ways
based on this value.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-Id: <20230511035435.734312-21-jsnow@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This commit changes how we detect and install meson. It notably removes
'--meson='.
Currently, configure creates a lightweight Python virtual environment
unconditionally using the user's configured $python that inherits system
packages. Temporarily, we forced the use of meson source present via git
submodule or in the release tarball.
With this patch, we restore the ability to use a system-provided meson:
If Meson is installed in the build venv and meets our minimum version
requirements, we will use that Meson. This includes a system provided
meson, which would be visible via system-site packages inside the venv.
In the event that Meson is installed but *not for the chosen Python
interpreter*, not found, or of insufficient version, we will attempt to
install Meson from vendored source into the newly created Python virtual
environment. This vendored installation replaces both the git submodule
and tarball source mechanisms for sourcing meson.
As a result of this patch, the Python interpreter we use for both our
own build scripts *and* Meson extensions are always known to be the
exact same Python. As a further benefit, there will also be a symlink
available in the build directory that points to the correct, configured
python and can be used by e.g. manual tests to invoke the correct,
configured Python unambiguously.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-Id: <20230511035435.734312-18-jsnow@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This patch changes the configure script so that it always creates and
uses a python virtual environment unconditionally.
Meson bootstrapping is temporarily altered to force the use of meson
from git or vendored source (as packaged in our source tarballs). A
subsequent commit restores the use of distribution-vendored Meson.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-Id: <20230511035435.734312-16-jsnow@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
reader_count() is a performance bottleneck because the global
aio_context_list_lock mutex causes thread contention. Put this debugging
assertion behind a new ./configure --enable-debug-graph-lock option and
disable it by default.
The --enable-debug-graph-lock option is also enabled by the more general
--enable-debug option.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20230501173443.153062-1-stefanha@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Currently when configure picks an ObjectiveC compiler it doesn't pay
attention to the cross-prefix. This isn't a big deal in practice,
because we only use ObjC on macos and you can't cross-compile to
macos. But it's a bit inconsistent.
Rearrange the handling of objcc in configure so that we do the
same thing that we do with cc and cxx. This means that the logic
for picking the ObjC compiler goes from:
if --objcc is specified, use that
otherwise if clang is available, use that
otherwise use $cc
to:
if --objcc is specified, use that
otherwise if --cross-prefix is specified, use ${cross_prefix}clang
otherwise if clang is available, use that
otherwise use $cc
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1185
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20230418161554.744834-1-peter.maydell@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The configure script used to compile some code which dereferences memory
with ubsan to verify the compiler can link with ubsan library which
detects dereferencing of uninitialized memory. However, as the
dereferenced memory was allocated in the same code, GCC can statically
detect the unitialized memory dereference and emit maybe-uninitialized
warning. If -Werror is set, this becomes an error, and the configure
script incorrectly thinks the error indicates the compiler cannot use
ubsan.
Fix this error by replacing the code with another function which adds
1 to a signed integer argument. This brings in ubsan to detect if it
causes signed integer overflow. As the value of the argument cannot be
statically determined, the new function is also immune to compiler
warnings.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-Id: <20230405070030.23148-1-akihiko.odaki@daynix.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The following patches are going to introduce meson wrap dependencies,
which is a solution to download and build missing dependencies.
The QEMU build-system will do network access with no way to avoid the
fallback. As a start, hardcode "--wrap-mode=nodownload" in configure, so
that wraps would be used only after a conscious decision of the user to
use "meson subprojects download" (before running configure).
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20230302131848.1527460-3-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
- split user and softmmu code
- use cleaner headers for tb_flush, target_ulong
- probe for gdb multiarch support at configure
- make syscall handling target independent
- add update guest debug of accel ops
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEZoWumedRZ7yvyN81+9DbCVqeKkQFAmQHomMACgkQ+9DbCVqe
KkTtFAf/aEyKY0iUNxtB4/oV1L2VnLaZi+iKoZT4RQgrhOhzr5WV6/3/V05cw1RJ
SIwcl8wB4gowYILs44eM/Qzcixiugl++2rvM4YVXiQyWKzkH6sY4X2iFuPGTwHLp
y+E7RM77QNS7M9xYaVkdsQawnbsgjG67wZKbb88aaekFEn61UuDg1V2Nqa2ICy7Y
/8yGIB2ixDfXOF0z4g8NOG44BXTDBtJbcEzf5GMz6D4HGnPZUbENy1nT0OcBk3zK
PqKPNkPFZ360pqA9MtougjZ3xTBb7Afe9nRRMquV2RoFmkkY2otSjdPBFQu5GBlm
NyTXEzjIQ6tCZlbS0eqdPVrUHHUx9g==
=Al36
-----END PGP SIGNATURE-----
Merge tag 'pull-gdbstub-070323-3' of https://gitlab.com/stsquad/qemu into staging
gdbstub refactor:
- split user and softmmu code
- use cleaner headers for tb_flush, target_ulong
- probe for gdb multiarch support at configure
- make syscall handling target independent
- add update guest debug of accel ops
# -----BEGIN PGP SIGNATURE-----
#
# iQEzBAABCgAdFiEEZoWumedRZ7yvyN81+9DbCVqeKkQFAmQHomMACgkQ+9DbCVqe
# KkTtFAf/aEyKY0iUNxtB4/oV1L2VnLaZi+iKoZT4RQgrhOhzr5WV6/3/V05cw1RJ
# SIwcl8wB4gowYILs44eM/Qzcixiugl++2rvM4YVXiQyWKzkH6sY4X2iFuPGTwHLp
# y+E7RM77QNS7M9xYaVkdsQawnbsgjG67wZKbb88aaekFEn61UuDg1V2Nqa2ICy7Y
# /8yGIB2ixDfXOF0z4g8NOG44BXTDBtJbcEzf5GMz6D4HGnPZUbENy1nT0OcBk3zK
# PqKPNkPFZ360pqA9MtougjZ3xTBb7Afe9nRRMquV2RoFmkkY2otSjdPBFQu5GBlm
# NyTXEzjIQ6tCZlbS0eqdPVrUHHUx9g==
# =Al36
# -----END PGP SIGNATURE-----
# gpg: Signature made Tue 07 Mar 2023 20:45:23 GMT
# gpg: using RSA key 6685AE99E75167BCAFC8DF35FBD0DB095A9E2A44
# gpg: Good signature from "Alex Bennée (Master Work Key) <alex.bennee@linaro.org>" [full]
# Primary key fingerprint: 6685 AE99 E751 67BC AFC8 DF35 FBD0 DB09 5A9E 2A44
* tag 'pull-gdbstub-070323-3' of https://gitlab.com/stsquad/qemu: (30 commits)
gdbstub: move update guest debug to accel ops
gdbstub: Build syscall.c once
stubs: split semihosting_get_target from system only stubs
gdbstub: Adjust gdb_do_syscall to only use uint32_t and uint64_t
gdbstub: Remove gdb_do_syscallv
gdbstub: split out softmmu/user specifics for syscall handling
include: split target_long definition from cpu-defs
testing: probe gdb for supported architectures ahead of time
gdbstub: only compile gdbstub twice for whole build
gdbstub: move syscall handling to new file
gdbstub: move register helpers into standalone include
gdbstub: don't use target_ulong while handling registers
gdbstub: fix address type of gdb_set_cpu_pc
gdbstub: specialise stub_can_reverse
gdbstub: introduce gdb_get_max_cpus
gdbstub: specialise target_memory_rw_debug
gdbstub: specialise handle_query_attached
gdbstub: abstract target specific details from gdb_put_packet_binary
gdbstub: rationalise signal mapping in softmmu
gdbstub: move chunks of user code into own files
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We've got some sample config files in docs/config/ but no means
of regression checking them. Thus let's test them in our readconfig
qtest, starting with ich9-ehci-uhci.cfg. Note: To enable the test
to read the config files from the build folder, we have to install
a symlink for docs/config in the build directory.
Message-Id: <20230228211533.201837-3-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Currently when we encounter a gdb that is old or not built with
multiarch in mind we fail rather messily. Try and improve the
situation by probing ahead of time and setting
HOST_GDB_SUPPORTS_ARCH=y in the relevant tcg configs. We can then skip
and give a more meaningful message if we don't run the test.
Cc: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230302190846.2593720-24-alex.bennee@linaro.org>
Message-Id: <20230303025805.625589-24-richard.henderson@linaro.org>
The enablement of -Wthread-safety broke compilation on macOS (if
-Werror is enabled, like in our CI). Disable it there by default
until the problems are resolved.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Acked-by: Kevin Wolf <kwolf@redhat.com>
Message-id: 20230301113425.286946-1-thuth@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
- ensure socat available for tests
- skip socat tests for MacOS
- properly clean up fifos after use
- make fp-test less chatty
- store test artefacts on Cirrus
- control custom runners with QEMU_CI knobs
- disable benchmark runs under tsan build
- update ubuntu 2004 to 2204
- skip nios2 kernel replay test
- add tuxrun baselines to avocado
- binary build of tricore tools
- export test results on cross builds
- improve windows builds
- ensure we properly print TAP headers
- migrate away from docker.py for building containers
- be more efficient in our handling of build artefacts between stages
- enable ztsd in containers so we can run tux_baselines
- disable heavyweight PPC64 Boot Linux test in CI
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEZoWumedRZ7yvyN81+9DbCVqeKkQFAmP/SmUACgkQ+9DbCVqe
KkQgSQgAmVrXEL+1/L7JNka/xDumZ+t39oxAAcY22WfV0dNIC85WQ/02A3+uMZmt
pbNXq7PPvZ1YE4ygjqwHu5WabEA1lmcdAoyg8/ACwnQMDyQ9RZGxceNO3UUsaoNx
b3U/hsOS1ggo5lzzfamsRj2xbxthtUx2MJZQe96NTWSut1ibcHLYyaOqxCY6Q5zJ
ZONOHOd3NLlrb+omLONLp9J+100Dt/x1UHsW5daSqRKaoDucO6w/So6YxGOshn90
tJIJ/vKTtYBZBfF5JYoJ7A/m9Ia/YjcTVLxbXpMI6Bvw0P9PSIAZuvgbKfxfIAnf
EHqZo1B71aH74vFTttK9Q1rnf9/9Cg==
=grRh
-----END PGP SIGNATURE-----
Merge tag 'pull-testing-next-010323-1' of https://gitlab.com/stsquad/qemu into staging
testing updates:
- ensure socat available for tests
- skip socat tests for MacOS
- properly clean up fifos after use
- make fp-test less chatty
- store test artefacts on Cirrus
- control custom runners with QEMU_CI knobs
- disable benchmark runs under tsan build
- update ubuntu 2004 to 2204
- skip nios2 kernel replay test
- add tuxrun baselines to avocado
- binary build of tricore tools
- export test results on cross builds
- improve windows builds
- ensure we properly print TAP headers
- migrate away from docker.py for building containers
- be more efficient in our handling of build artefacts between stages
- enable ztsd in containers so we can run tux_baselines
- disable heavyweight PPC64 Boot Linux test in CI
# -----BEGIN PGP SIGNATURE-----
#
# iQEzBAABCgAdFiEEZoWumedRZ7yvyN81+9DbCVqeKkQFAmP/SmUACgkQ+9DbCVqe
# KkQgSQgAmVrXEL+1/L7JNka/xDumZ+t39oxAAcY22WfV0dNIC85WQ/02A3+uMZmt
# pbNXq7PPvZ1YE4ygjqwHu5WabEA1lmcdAoyg8/ACwnQMDyQ9RZGxceNO3UUsaoNx
# b3U/hsOS1ggo5lzzfamsRj2xbxthtUx2MJZQe96NTWSut1ibcHLYyaOqxCY6Q5zJ
# ZONOHOd3NLlrb+omLONLp9J+100Dt/x1UHsW5daSqRKaoDucO6w/So6YxGOshn90
# tJIJ/vKTtYBZBfF5JYoJ7A/m9Ia/YjcTVLxbXpMI6Bvw0P9PSIAZuvgbKfxfIAnf
# EHqZo1B71aH74vFTttK9Q1rnf9/9Cg==
# =grRh
# -----END PGP SIGNATURE-----
# gpg: Signature made Wed 01 Mar 2023 12:51:49 GMT
# gpg: using RSA key 6685AE99E75167BCAFC8DF35FBD0DB095A9E2A44
# gpg: Good signature from "Alex Bennée (Master Work Key) <alex.bennee@linaro.org>" [full]
# Primary key fingerprint: 6685 AE99 E751 67BC AFC8 DF35 FBD0 DB09 5A9E 2A44
* tag 'pull-testing-next-010323-1' of https://gitlab.com/stsquad/qemu: (24 commits)
tests/avocado: disable BootLinuxPPC64 test in CI
tests/docker: add zstdtools to the images
gitlab: move the majority of artefact handling to a template
tests/docker: use direct RUNC call to run test jobs
tests/docker: use direct RUNC call to build containers
tests/docker: add USER stanzas to non-lci images
tests/lcitool: append user setting stanza to dockerfiles
configure: expose the direct container command
tests: Ensure TAP version is printed before other messages
gitlab: Use plain docker in container-template.yml
tests/dockerfiles: unify debian-toolchain references
cirrus.yml: Improve the windows_msys2_task
tests: ensure we export job results for some cross builds
tests/docker: Use binaries for debian-tricore-cross
tests: add tuxrun baseline test to avocado
tests: skip the nios2 replay_kernel test
testing: update ubuntu2004 to ubuntu2204
tests: don't run benchmarks for the tsan build
gitlab: extend custom runners with base_job_template
gitlab-ci: Use artifacts instead of dumping logs in the Cirrus-CI jobs
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
When building with clang, -no-pie gives a warning on every single build,
so remove it.
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
In the process of migrating away from using docker.py to build our
containers we need to expose the command to the build environment. The
script is still a useful way to probe which command works though.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230228190653.1602033-18-alex.bennee@linaro.org>
At the moment, we look for just "python3" and "python", which is good
enough almost all of the time. But ... if you are on a platform that
uses an older Python by default and only offers a newer Python as an
option, you'll have to specify --python=/usr/bin/foo every time.
We can be kind and instead make a cursory attempt to locate a suitable
Python binary ourselves, looking for the remaining well-known binaries.
This configure loop will prefer, in order:
1. Whatever is specified in $PYTHON
2. python3
3. python
4. python3.11 down through python3.6
Notes:
- Python virtual environment provides binaries for "python3", "python",
and whichever version you used to create the venv,
e.g. "python3.8". If configure is invoked from inside of a venv, this
configure loop will not "break out" of that venv unless that venv is
created using an explicitly non-suitable version of Python that we
cannot use.
- In the event that no suitable python is found, the first python found
is the version used to generate the human-readable error message.
- The error message isn't printed right away to allow later
configuration code to pick up an explicitly configured python.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
If neither --python nor --meson are specified, Meson's generated
build.ninja will invoke Python script using the interpreter *that Meson
itself is running under*; not the one identified by configure.
This is only an issue if Meson's Python interpreter is not "the first
one in the path", which is the one that is used if --python is not
specified. A common case where this happen is when the "python3" binary
comes from a virtual environment but Meson is not installed (with pip)
in the virtual environment. In this case (presumably) whoever set up
the venv wanted to use the venv's Python interpreter to build QEMU,
while Meson might use a different one, for example an enterprise
distro's older runtime.
So, detect whether a virtual environment is setup, and if the virtual
environment does not have Meson, use the meson submodule. Meson will
then run under the virtual environment's Python interpreter.
Reported-by: John Snow <jsnow@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
QEMU configure script goes into an infinite error printing loop
when in read only directory due to 'build' dir never being created.
Checking if 'mkdir dir' succeeds prevents this error.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/321
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Dinah Baum <dinahbaum123@gmail.com>
Message-Id: <20230221110631.4142-1-dinahbaum123@gmail.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
[thuth: Remove second "touch $MARKER"]
Signed-off-by: Thomas Huth <thuth@redhat.com>
This enables clang's thread safety analysis (TSA), which we'll use to
statically check the block graph locking.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20221207131838.239125-9-kwolf@redhat.com>
Reviewed-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20230117135203.3049709-4-eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Anthony Perard recently reported some problems with Clang v6.0 from
Ubuntu Bionic (with regards to the -Wmissing-braces configure test).
Since we're not officially supporting that version of Ubuntu anymore,
we should better bump our minimum version check in the configure script
instead of using our time to fix problems of unsupported compilers.
According to repology.org, our supported distros ship these versions
of Clang (looking at the highest version only):
Fedora 36: 14.0.5
CentOS 8 (RHEL-8): 12.0.1
Debian 11: 13.0.1
OpenSUSE Leap 15.4: 13.0.1
Ubuntu LTS 20.04: 12.0.0
FreeBSD Ports: 15.0.7
NetBSD pkgsrc: 15.0.7
Homebrew: 15.0.7
MSYS2 mingw: 15.0.7
Haiku ports: 12.0.1
While it seems like we could update to v12.0.0 from that point of view,
the default version on Ubuntu 20.04 is still v10.0, and we use that for
our CI tests based via the tests/docker/dockerfiles/ubuntu2004.docker
file.
Thus let's make v10.0 our minimum version now (which corresponds to
Apple Clang version v12.0). The -Wmissing-braces check can then be
removed, too, since both our minimum GCC and our minimum Clang version
now handle this correctly.
Message-Id: <20230131180239.1582302-1-thuth@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The tests under tests/tcg depend on the TCG accelerator. Do not build
them if --disable-tcg was given in the configure line.
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230120184825.31626-7-farosas@suse.de>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The cmd_line.txt mangling is only needed when rebuilding from very old
trees and is kept mostly as an example of how to extend it. However,
Meson 0.63 introduces a deprecation mechanism for meson_options.txt
that can be used instead, so get rid of our home-grown hack.
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
We've been very gradually adding G_GNUC_PRINTF annotations
to functions over years. This has been useful in detecting
certain malformed printf strings, or cases where we pass
user data as the printf format which is a potential security
flaw.
Given the inherant memory corruption danger in use of format
strings vs mis-matched variadic arguments, it is worth applying
G_GNUC_PRINTF to all functions using printf, even if we know
they are safe.
The compilers can reasonably reliably identify such places
with the -Wsuggest-attribute=format / -Wmissing-format-attribute
flags.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20221219130205.687815-7-berrange@redhat.com>
[-Wsuggest-attribute=format and -Wmissing-format-attribute are
synonyms, only include one; disable it for testfloat. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
configure uses "pkg-config" directly so that GLIB_VERSION is always based
on host glib version. To correctly handle cross-compilation it should use
"$pkg_config" and take GLIB_VERSION from the cross-compiled glib.
Reported-by: Валентин <val15032008@mail.ru>
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1414
Cc: qemu-stable@nongnu.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Some warnings are hardcoded in QEMU_CFLAGS and not tested. There is
no particular reason to single out these five, as many more -W flags are
present on all the supported compilers. For homogeneity when moving
the detection to meson, make them use the same warn_flags infrastructure.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Ensure that qemu-ga variables set at configure time are kept
later when the script is rerun. For preserve_env to work,
the variables need to be empty so move the default values
to config-host.mak generation.
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
$cpu is derived from preprocessor defines rather than uname these days,
so do not bother using isainfo on Solaris. Likewise do not recognize
BeOS's uname -m output.
Keep the other, less OS-specific canonicalizations for the benefit
of people using --cpu.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This is not needed ever since QEMU stopped detecting -liberty; this
happened with the Meson switch but it is quite likely that the
library was not really necessary years before.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Our CI system echos the lines it executes but not the expansions. For
the sake of a line of extra verbosity during the configure phase lets
echo the invocation of script to stdout as well as the log when on CI.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20221221090411.1995037-4-alex.bennee@linaro.org>
After configuring with --target-list=hexagon-linux-user
running `make check-tcg` just prints the following:
```
make: Nothing to be done for 'check-tcg'
```
In the probe_target_compiler function, the 'break'
command is used incorrectly. There are no lexically
enclosing loops associated with that break command which
is an unspecfied behaviour in the POSIX standard.
The dash shell implementation aborts the currently executing
loop, in this case, causing the rest of the logic for the loop
in line 2490 to be skipped, which means no Makefiles are
generated for the tcg target tests.
Fixes: c3b570b5a9 (configure: don't enable
cross compilers unless in target_list)
Signed-off-by: Mukilan Thiyagarajan <quic_mthiyaga@quicinc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Link: https://patchew.org/QEMU/20221207082309.9966-1-quic._5Fmthiyaga@quicinc.com/
Message-Id: <20221207082309.9966-1-quic_mthiyaga@quicinc.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20221221090411.1995037-2-alex.bennee@linaro.org>
This commit allows QGA to write to Windows event log using Win32 API's
ReportEvent() [1], much like syslog() under *nix guests.
In order to generate log message definitions we use a very basic message
text file [2], so that every QGA's message gets ID 1. The tools
"windmc" and "windres" respectively are used to generate ".rc" file and
COFF object file, and then the COFF file is linked into qemu-ga.exe.
[1] https://learn.microsoft.com/en-us/windows/win32/api/winbase/nf-winbase-reporteventa
[2] https://learn.microsoft.com/en-us/windows/win32/eventlog/message-text-files
Originally-by: Yuri Pudgorodskiy <yur@virtuozzo.com>
Signed-off-by: Andrey Drobyshev <andrey.drobyshev@virtuozzo.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Konstantin Kostiuk <kkostiuk@redhat.com>
Tested-by: Konstantin Kostiuk <kkostiuk@redhat.com>
Signed-off-by: Konstantin Kostiuk <kkostiuk@redhat.com>
The docker probe uses "sudo -n" which can cause an e-mail with a security warning
each time when configure is run. Therefore run docker probe only if either docker
or podman are available.
That avoids the problematic "sudo -n" on build environments which have neither
docker nor podman installed.
Fixes: c4575b5915 ("configure: store container engine in config-host.mak")
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Message-Id: <20221030083510.310584-1-sw@weilnetz.de>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20221117172532.538149-2-alex.bennee@linaro.org>
The configure script fails because it tries to compile small C programs
with a main function which is declared with arguments argc and argv
although those arguments are unused.
Running `configure -extra-cflags=-Wunused-parameter` triggers the problem.
configure for a native build does abort but shows the error in config.log.
A cross build configure for Windows with Debian stable aborts with an
error.
Avoiding unused arguments fixes this.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Message-Id: <20221102202258.456359-1-sw@weilnetz.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The previous tweak was incomplete as it missed a leg.
Fixes: abafb64b6d (configure: explicitly set cflags for --disable-pie)
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20221027183637.2772968-6-alex.bennee@linaro.org>
This avoids the unfortunate effect of always builds the pc-bios blobs
for targets the user isn't interested in.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20221027183637.2772968-5-alex.bennee@linaro.org>
When determining the endiandness of the target architecture we're
building for a small program is compiled, which in an obfuscated
way declares two strings. Then, we look which string is in
correct order (using strings binary) and deduct the endiandness.
But using the strings binary is problematic, because it's part of
toolchain (strings is just a symlink to
x86_64-pc-linux-gnu-strings or llvm-strings). And when
(cross-)compiling, it requires users to set the symlink to the
correct toolchain.
Fortunately, we have a better alternative anyways. We can mimic
what compiler.h is already doing: comparing __BYTE_ORDER__
against values for little/big endiandness.
Bug: https://bugs.gentoo.org/876933
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Message-Id: <d6d9c7043cfe6d976d96694f2b4ecf85cf3206f1.1665732504.git.mprivozn@redhat.com>
Cc: qemu-stable@nongnu.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This avoids the unfortunate effect of building pc-bios blobs
even for targets the user isn't interested in.
Due to the bi-arch nature of x86 and PPC firmware, check for the
desired target by hand, and don't just look for the compilation target
in $target_list.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This reverts commit 730fe750fb.
Unconditionally building all the bios for all arches was a little too
far too fast.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Tested-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20221011113417.794841-4-alex.bennee@linaro.org>
s390-ccw remains a bit more complex, because the -march=z900 test is done
only for the native cross compiler. Otherwise, all that is needed is
to pass the (now mandatory) target argument to write_target_makefile.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20220929114231.583801-29-alex.bennee@linaro.org>
Remove the symlink to tests/tcg/config-*.mak, which is possible now
that unused target config files are not created either.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20220929114231.583801-28-alex.bennee@linaro.org>
Let write_target_makefile handle both host and container cross compilers.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20220929114231.583801-27-alex.bennee@linaro.org>
It will not be specific to tests/tcg anymore, since it will be possible to
build firmware using container-based cross compilers too.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20220929114231.583801-26-alex.bennee@linaro.org>
Further decoupling of tests/tcg from the main QEMU Makefile, and making
the build more similar between the cross compiler case and the vetted
container images.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20220929114231.583801-25-alex.bennee@linaro.org>
Instead of linking tests/tcg/Makefile.target into the build tree, name
the symbolic link "Makefile" and create it in every target subdirectory.
This makes it possible to just invoke "make" in tests/tcg subdirectories.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20220929114231.583801-21-alex.bennee@linaro.org>
Remove the DOCKER_SCRIPT and TARGET variable from the Makefile invocation
for tests/tcg. For DOCKER_SCRIPT, resolve the path to docker.py in configure;
for TARGET, move it to config-$(TARGET).mak and use a symbolic link to break
the cycle.
The symbolic link is still needed because tests/tcg includes dummy config files
for targets that are not buildable. Once that is cleaned up, the symbolic link
will go away too.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20220929114231.583801-20-alex.bennee@linaro.org>
In preparation for removing $(DOCKER_SCRIPT) from the tests/tcg configuration
files, have Make use the same container engine that had been probed at
configure time.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20220929114231.583801-19-alex.bennee@linaro.org>
For now, return 1 for container-based compilers. This will change as
soon as ROMs will be buildable with them.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20220929114231.583801-18-alex.bennee@linaro.org>
When tests/tcg gained it's own config-host.mak we forgot to move the
GDB detection.
Fixes: 544f4a2578 (tests/tcg: isolate from QEMU's config-host.mak)
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20220929114231.583801-6-alex.bennee@linaro.org>
The test is slightly weaker than before, because it does not
call an extern "C" function from a C source file. However,
in practice what we seek to detect is ABI compatibility of the
various sanitizer flags, and for that it is enough to compile
anything with CC and link it with CXX.
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This removes the dependency of dbus-display on --enable-modules. It also allows
cleanups in modinfo collection and allows moving C++ compiler detection to
meson.build.
Because it is now deprecated to use install_subdir to create an empty directory,
replace it with install_emptydir.
Updating the Meson submodule to 0.61.5 also removes the message
WARNING: Broken python installation detected. Python files installed
by Meson might not be found by python interpreter.
unless using system meson is forced with --meson.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/873
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/848
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Just use using the compiler binary, with -nostdlib in the case of the
linker; the compiler driver (whether i686-*-gcc, or x86_64-*-gcc with
the -m32 option) will then pick the right magic option to as and ld.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Since QEMU 7.1 we don't support Ubuntu 18.04 anymore, so the last big
important Linux distro that did not have a pre-packaged libslirp has
been dismissed. All other major distros seem to have a libslirp package
in their distribution already - according to repology.org:
Fedora 35: 4.6.1
CentOS 8 (RHEL-8): 4.4.0
Debian 11: 4.4.0
OpenSUSE Leap 15.3: 4.3.1
Ubuntu LTS 20.04: 4.1.0
FreeBSD Ports: 4.7.0
NetBSD pkgsrc: 4.7.0
Homebrew: 4.7.0
MSYS2 mingw: 4.7.0
The only one that was still missing a libslirp package is OpenBSD - but
the next version (OpenBSD 7.2 which will be shipped in October) is going
to include a libslirp package. Since QEMU 7.2 will be published after
OpenBSD 7.2, we should be fine there, too.
So there is no real urgent need for keeping the slirp submodule in
the QEMU tree anymore. Thus let's drop the slirp submodule now and
rely on the libslirp packages from the distributions instead.
Message-Id: <20220824151122.704946-7-thuth@redhat.com>
Acked-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
A Linux headers update to v6.0-rc switches some definitions from GNU
'zero-length-array' extension to the C-standard-defined flexible array
member. e.g.
struct kvm_msrs {
__u32 nmsrs; /* number of msrs in entries */
__u32 pad;
- struct kvm_msr_entry entries[0];
+ struct kvm_msr_entry entries[];
};
Those (unlike the GNU zero-length-array) have some extra restrictions like
'this must be put at the end of a struct', which clang build would complain
about. e.g. the current code
struct {
struct kvm_msrs info;
struct kvm_msr_entry entries[1];
} msr_data = { }
generates the warning like:
target/i386/kvm/kvm.c:2868:25: error: field 'info' with variable sized
type 'struct kvm_msrs' not at the end of a struct or class is a GNU
extension [-Werror,-Wgnu-variable-sized-type-not-at-end]
struct kvm_msrs info;
^
In fact, the variable length 'entries[]' field in 'info' is zero-sized in
GNU defined semantics, which can give predictable offset for 'entries[1]'
in local msr_data. The local defined struct is just there to force a stack
allocation large enough for 1 kvm_msr_entry, a clever trick but requires to
turn off this clang warning.
Suggested-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Chenyi Qiang <chenyi.qiang@intel.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <20220915091035.3897-2-chenyi.qiang@intel.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
We use the non-POSIX 'local' keyword in just two places in configure;
rewrite to avoid it.
In do_compiler(), just drop the 'local' keyword. The variable
'compiler' is only used elsewhere in the do_compiler_werror()
function, which already uses the variable as a normal non-local one.
In probe_target_compiler(), $try and $t are both local; make them
normal variables and use a more obviously distinct variable name
for $t.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20220825150703.4074125-8-peter.maydell@linaro.org
Shellcheck warns that we have one place where we run a command and
then check if it failed using $?; this is better written to simply
check the command in the 'if' statement directly.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20220825150703.4074125-7-peter.maydell@linaro.org
There's only one place in configure where we use `...` to execute a
command and capture the result. Switch to $() to match the rest of
the script. This silences a shellcheck warning.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20220825150703.4074125-6-peter.maydell@linaro.org
Shellcheck warns that in
rm -f */config-devices.mak.d
the glob might expand to something with a '-' in it, which would
then be misinterpreted as an option to rm. Fix this by adding './'.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20220825150703.4074125-5-peter.maydell@linaro.org
This commit adds quotes in some places which:
* are spotted by shellcheck
* are obviously incorrect
* are easy to fix just by adding the quotes
It doesn't attempt fix all of the places shellcheck finds errors,
or even all the ones which are easy to fix. It's just a random
sampling which is hopefully easy to review and which cuts
down the size of the problem for next time somebody wants to
try to look at shellcheck errors.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20220825150703.4074125-4-peter.maydell@linaro.org
The meson_args variable was added in commit 3b4da13293, but
was not used in that commit and isn't used today. Delete the
unnecessary assignment.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20220825150703.4074125-3-peter.maydell@linaro.org
Shellcheck correctly reports that we set python_version and never use
it. This is a leftover from commit f9332757898a7: we used to use
python_version purely to as part of the summary information printed
at the end of a configure run, and that commit changed to printing
the information from meson (which looks up the python version
itself). Remove the unused variable.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20220825150703.4074125-2-peter.maydell@linaro.org
This is working around current limitation of Meson's handling of
--disable-pie.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220914155950.804707-19-alex.bennee@linaro.org>
Instead of using feature_not_found(), which is not a good match because
there is no "remedy" to fix the lack of makecontext(), just print a
custom error.
This happens to remove the last use of feature_not_found(), so remove
the definition and the documentation.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
probe_target_compiler returns nonempty $target_cc for installed toolchains
and $container_cross_cc for container-based toolchains. In both cases
however the flags (coming from $cross_cc_cflags_${target_arch}) must be
in $target_cflags.
Therefore, do not clear them prior to returning from probe_target_compiler.
Reported-by: Taylor Simpson <tsimpson@quicinc.com>
Fixes: 92e288fcfb ("build: try both native and cross compilers", 2022-07-08)
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When moving this code out of probe_target_compiler(), we failed to adjust
the variable in which the target is located, resulting in e.g.
powerpc64-linux-user-linux-gnu-gcc-10
Fixes: cd362defbb ("tests/tcg: merge configure.sh back into main configure script")
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220728183901.1290113-1-richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The '==' operator to test is a bashism; the standard way to copmare
strings is '='. This causes dash to complain:
../../configure: 681: test: linux: unexpected operator
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-id: 20220720152631.450903-6-peter.maydell@linaro.org
In commit 823eb01345 we moved the setting of ARCH from configure
to meson.build, but we accidentally left behind one attempt to use
$ARCH in configure, which was trying to add -msmall-data to the
compiler flags on Alpha hosts. Since ARCH is now never set, the test
always fails and we never add the flag.
There isn't actually any need to use this compiler flag on Alpha:
the original intent was that it would allow us to simplify our TCG
codegen on that platform, but we never actually made the TCG changes
that would rely on -msmall-data.
Drop the effectively-dead code from configure, as we don't need it.
This was spotted by shellcheck:
In ./configure line 2254:
case "$ARCH" in
^---^ SC2153: Possible misspelling: ARCH may not be assigned, but arch is.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-id: 20220720152631.450903-5-peter.maydell@linaro.org
The variable string-replacement syntax ${var/old/new} is a bashism
(though it is also supported by some other shells), and for instance
does not work with the NetBSD /bin/sh, which complains:
../src/configure: 687: Syntax error: Bad substitution
Replace it with a more portable sed-based approach, similar to
what we already do in quote_sh().
Note that shellcheck also diagnoses this:
In ./configure line 687:
e=${e/'\'/'\\'}
^-----------^ SC2039: In POSIX sh, string replacement is undefined.
^-- SC1003: Want to escape a single quote? echo 'This is how it'\''s done'.
^-- SC1003: Want to escape a single quote? echo 'This is how it'\''s done'.
In ./configure line 688:
e=${e/\"/'\"'}
^----------^ SC2039: In POSIX sh, string replacement is undefined.
Fixes: 8154f5e64b ("meson: Prefix each element of firmware path")
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Thomas Huth <thuth@redhat.com>
Message-id: 20220720152631.450903-4-peter.maydell@linaro.org
In shell script syntax, $var[something] is not special for variable
expansion: $var is expanded. However, as it can look as if it were
intended to be an array element access (the correct syntax for which
is ${var[something]}), shellcheck recommends using explicit braces
around ${var} to clarify the intended expansion.
This fixes the warning:
In ./configure line 2346:
if "$target_ld" -verbose 2>&1 | grep -q "^[[:space:]]*$emu[[:space:]]*$"; then
^-- SC1087: Use braces when expanding arrays, e.g. ${array[idx]} (or ${var}[.. to quiet).
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-id: 20220720152631.450903-3-peter.maydell@linaro.org
In commit 7d7dbf9dc1 we added a line to the configure script
which is not valid POSIX shell syntax, because it is missing a space
after a '!' character. shellcheck diagnoses this:
if !(GIT="$git" "$source_path/scripts/git-submodule.sh" "$git_submodules_action" "$git_submodules"); then
^-- SC1035: You are missing a required space after the !.
and the OpenBSD shell will not correctly handle this without the space.
Fixes: 7d7dbf9dc1 ("configure: replace --enable/disable-git-update with --with-git-submodules")
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Tested-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-id: 20220720152631.450903-2-peter.maydell@linaro.org
Use the pre-packaged toolchain provided by Loongson via github.
Tested-by: Song Gao <gaosong@loongson.cn>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220704070824.965429-1-richard.henderson@linaro.org>
* pre-install data files in the build directory (Akihiko)
* SCSI fixes for Mac OS (Mark)
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmLO3bQUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroNv5AgAgGe8hGOcqJSzmFgeUJ7UEaauap6E
fF4zau8Xux7R6pnvPe2FeJ70AlvstFAUoU++7G3linQ+eqnFD7E18KQkfp9qX7jY
xDFPJRf6JNhwDjxQ2Tp0ShOcm5HkDv4Z4cPlx0T+wfKTlUWCzNEkhVrjOhpDYnSe
OldsdFjY0sUjZ1R/QNiuQ65aWwOr9gJ07KfakJQMX2YCMun6SO3kB/GtmyecTV3C
uNAUIdqJLsEbR1ckdMVVmixhtzMPW2R7/vjJkxG8RXUAcDmDHkuKPhWKyZ9a7/hh
CV8iMQMup6mgT8ndb5DWv551Y+C/rA1bH9U1NkaeQ9RP83CE4a6fpSMiiQ==
=82zT
-----END PGP SIGNATURE-----
Merge tag 'for-upstream' of https://gitlab.com/bonzini/qemu into staging
* SCSI fuzzing fix (Mauro)
* pre-install data files in the build directory (Akihiko)
* SCSI fixes for Mac OS (Mark)
# gpg: Signature made Wed 13 Jul 2022 15:59:00 BST
# gpg: using RSA key F13338574B662389866C7682BFFBD25F78C7AE83
# gpg: issuer "pbonzini@redhat.com"
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [full]
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" [full]
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1
# Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83
* tag 'for-upstream' of https://gitlab.com/bonzini/qemu:
pc-bios/s390-ccw: add -Wno-array-bounds
q800: add default vendor and product information for scsi-cd devices
q800: add default vendor and product information for scsi-hd devices
scsi-disk: allow MODE SELECT block descriptor to set the block size
scsi-disk: allow the MODE_PAGE_R_W_ERROR AWRE bit to be changeable for CDROM drives
q800: implement compat_props to enable quirk_mode_page_truncated for scsi-cd devices
scsi-disk: add SCSI_DISK_QUIRK_MODE_PAGE_TRUNCATED quirk for Macintosh
scsi-disk: add FORMAT UNIT command
q800: implement compat_props to enable quirk_mode_page_vendor_specific_apple for scsi devices
scsi-disk: add SCSI_DISK_QUIRK_MODE_PAGE_VENDOR_SPECIFIC_APPLE quirk for Macintosh
q800: implement compat_props to enable quirk_mode_sense_rom_use_dbd for scsi-cd devices
scsi-disk: add SCSI_DISK_QUIRK_MODE_SENSE_ROM_USE_DBD quirk for Macintosh
q800: implement compat_props to enable quirk_mode_page_apple_vendor for scsi-cd devices
scsi-disk: add MODE_PAGE_APPLE_VENDOR quirk for Macintosh
scsi-disk: add new quirks bitmap to SCSIDiskState
meson: Prefix each element of firmware path
module: Use bundle mechanism
datadir: Use bundle mechanism
cutils: Introduce bundle mechanism
scsi/lsi53c895a: really fix use-after-free in lsi_do_msgout (CVE-2022-0216)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Akihiko Odaki <akihiko.odaki@gmail.com>
Message-Id: <20220624154042.51512-1-akihiko.odaki@gmail.com>
[Rewrite shell function without using Bash extensions. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
If we don't need to emulate any target, we certainly don't need TCG.
This should also help to compile again with
".../configure --enable-tools --disable-system --disable-user"
on systems that do not have a TCG backend.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
[thuth: Re-arranged the code, remove check-softfloat from buildtest.yml]
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220706153816.768143-1-thuth@redhat.com>
Configure is trying to fall back on cross compilers for targets that
can have bi-arch or bi-endian toolchains, but there are many corner
cases where just checking the name can go wrong. For example, the RHEL
ppc64le compiler is bi-arch and bi-endian, but multilibs are disabled.
Therefore it cannot be used to build 32-bit hosted binaries like the
linux-user TCG tests.
Trying the cross compiler first also does not work, and an example for
this is also ppc64le. The powerpc64-linux-gnu-gcc binary from the
cross-gcc package is theoretically multilib-friendly, but it cannot
find the CRT files on a ppc64le host, because they are not in the .../le
multilib subdirectory.
This can be fixed by testing both the native compiler and the cross
compiler, and proceeding with the first one that works. To do this,
move the compiler usability check from the tests/tcg snippet to inside
probe_target_compiler and, while at it, restrict the softmmu emulation
target to basically a test for the presence of libgcc.
Tested-by: Matheus Kowalczuk Ferst <matheus.ferst@eldorado.org.br>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Let probe_target_compiler know if it is looking for a compiler for a
softmmu (freestanding) or a linux-user (hosted) environment. The
detection for the compiler has to be done differently in the two
cases.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add more pairs of bi-arch compilers, so that it is not necessary to have
e.g. both little-endian and big-endian ARM compilers.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Use the flags passed to the configure script for the ppc cross compiler,
which in fact default to those that are needed to get the 32-bit ISA.
Add the endianness flag so that it remains possible to use a ppc64le
compiler to compile VOF.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
QEMU_CFLAGS is not available in pc-bios/s390-ccw/netboot.mak, but the Makefile
needs to access the flags passed to the configure script for the s390x
cross compiler. Fix everything and rename QEMU_CFLAGS to EXTRA_CFLAGS for
consistency with tests/tcg.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The optionrom build is disregarding the flags passed to the configure
script via --cross-cflags-i386. Pass it down and add it to the Makefile.
This will make it possible to get the -m32 flag from $target_cflags to
force a 32-bit build on 64-bit hosts, instead of supplying manually the
arcane -Wa,-32 and linker emulation options.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* virtio reset cleanups
* build system cleanups
* fix Cirrus CI
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmKpooQUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroNlFwf+OugLGRZl3KVc7akQwUJe9gg2T31h
VkC+7Tei8FAwe8vDppVd+CYEIi0M3acxD2amRrv2etCCGSuySN1PbkfRcSfPBX01
pRWpasdhfqnZR8Iidi7YW1Ou5CcGqKH49nunBhW10+osb/mu5sVscMuOJgTDj/lK
CpsmDyk6572yGmczjNLlmhYcTU36clHpAZgazZHwk1PU+B3fCKlYYyvUpT3ItJvd
cK92aIUWrfofl3yTy0k4IwvZwNjTBirlstOIomZ333xzSA+mm5TR+mTvGRTZ69+a
v+snpMp4ILDMoB5kxQ42kK5WpdiN//LnriA9CBFDtOidsDDn8kx7gJe2RA==
=Dxwa
-----END PGP SIGNATURE-----
Merge tag 'for-upstream' of https://gitlab.com/bonzini/qemu into staging
* statistics subsystem
* virtio reset cleanups
* build system cleanups
* fix Cirrus CI
# -----BEGIN PGP SIGNATURE-----
#
# iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmKpooQUHHBib256aW5p
# QHJlZGhhdC5jb20ACgkQv/vSX3jHroNlFwf+OugLGRZl3KVc7akQwUJe9gg2T31h
# VkC+7Tei8FAwe8vDppVd+CYEIi0M3acxD2amRrv2etCCGSuySN1PbkfRcSfPBX01
# pRWpasdhfqnZR8Iidi7YW1Ou5CcGqKH49nunBhW10+osb/mu5sVscMuOJgTDj/lK
# CpsmDyk6572yGmczjNLlmhYcTU36clHpAZgazZHwk1PU+B3fCKlYYyvUpT3ItJvd
# cK92aIUWrfofl3yTy0k4IwvZwNjTBirlstOIomZ333xzSA+mm5TR+mTvGRTZ69+a
# v+snpMp4ILDMoB5kxQ42kK5WpdiN//LnriA9CBFDtOidsDDn8kx7gJe2RA==
# =Dxwa
# -----END PGP SIGNATURE-----
# gpg: Signature made Wed 15 Jun 2022 02:12:36 AM PDT
# gpg: using RSA key F13338574B662389866C7682BFFBD25F78C7AE83
# gpg: issuer "pbonzini@redhat.com"
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [undefined]
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" [undefined]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1
# Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83
* tag 'for-upstream' of https://gitlab.com/bonzini/qemu: (21 commits)
build: include pc-bios/ part in the ROMS variable
meson: put cross compiler info in a separate section
q35：Enable TSEG only when G_SMRAME and TSEG_EN both enabled
build: fix check for -fsanitize-coverage-allowlist
tests/vm: allow running tests in an unconfigured source tree
configure: cleanup -fno-pie detection
configure: update list of preserved environment variables
virtio-mmio: cleanup reset
virtio: stop ioeventfd on reset
virtio-mmio: stop ioeventfd on legacy reset
s390x: simplify virtio_ccw_reset_virtio
block: add more commands to preconfig mode
hmp: add filtering of statistics by name
qmp: add filtering of statistics by name
hmp: add filtering of statistics by provider
qmp: add filtering of statistics by provider
hmp: add basic "info stats" implementation
cutils: add functions for IEC and SI prefixes
qmp: add filtering of statistics by target vCPU
kvm: Support for querying fd-based stats
...
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
add the libvfio-user library as a submodule. build it as a meson
subproject.
libvfio-user is distributed with BSD 3-Clause license and
json-c with MIT (Expat) license
Signed-off-by: Elena Ufimtseva <elena.ufimtseva@oracle.com>
Signed-off-by: John G Johnson <john.g.johnson@oracle.com>
Signed-off-by: Jagannathan Raman <jag.raman@oracle.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: c2adec87958b081d1dc8775d4aa05c897912f025.1655151679.git.jag.raman@oracle.com
[Changed submodule URL to QEMU's libvfio-user mirror on GitLab. The QEMU
project mirrors its dependencies so that it can provide full source code
even in the event that its dependencies become unavailable. Note that
the mirror repo is manually updated, so please contact me to make newer
libvfio-user commits available. If I become a bottleneck we can set up a
cronjob.
Updated scripts/meson-buildoptions.sh to match the meson_options.txt
change. Failure to do so can result in scripts/meson-buildoptions.sh
being modified by the build system later on and you end up with a dirty
working tree.
--Stefan]
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Include the full path in TARGET_DIR, so that messages from sub-Makefiles
are clearer. Also, prepare for possibly building firmware outside
pc-bios/ from the Makefile,
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Place it only inside the 'if test "$pie" = "no"' conditional. Since
commit 43924d1e53 ("pc-bios/optionrom: detect -fno-pie", 2022-05-12),
the PIE options are detected independently by pc-bios/optionrom/Makefile,
and the CFLAGS_NOPIE/LDFLAGS_NOPIE variables are not used anymore.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The move from tests/tcg/configure.sh started enabling the container image
for xtensa-linux-user, which fails because the compiler does not have
the full set of headers. The cause is the "xtensa*-softmmu)" case
in tests/tcg/configure.sh which became just "xtensa*)" in the new
probe_target_compiler shell function. Look out for xtensa*-linux-user
and do not configure it.
Reported-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20220608135727.1341946-1-pbonzini@redhat.com>
Fixes: cd362defbb ("tests/tcg: merge configure.sh back into main configure script")
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220613171258.1905715-6-alex.bennee@linaro.org>
Signed-off-by: Song Gao <gaosong@loongson.cn>
Signed-off-by: Xiaojuan Yang <yangxiaojuan@loongson.cn>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Acked-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220606124333.2060567-44-yangxiaojuan@loongson.cn>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The only compiler variable that is still needed is $(CC), for
contrib/plugins/Makefile. All firmware builds have their own
config-host.mak file.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20220517092616.1272238-17-pbonzini@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20220527153603.887929-28-alex.bennee@linaro.org>
While container-based cross compilers are not supported, this already
makes it possible to build vof on any machine that has an installation
of GCC and binutils for 32- or 64-bit PowerPC.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20220517092616.1272238-16-pbonzini@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20220527153603.887929-27-alex.bennee@linaro.org>
While container-based cross compilers are not supported, this already makes
it possible to build x86 optionroms on any machine that has an installation
of GCC and binutils for 32- or 64-bit x86.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20220517092616.1272238-15-pbonzini@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20220527153603.887929-26-alex.bennee@linaro.org>
John Snow
Stefan Hajnoczi
Peter Maydell
Akihiko Odaki
Marc-André Lureau
Emilio Cota
Thomas Huth
Alex Bennée
Warner Losh
Paolo Bonzini
Dinah Baum
Kevin Wolf
Fabiano Rosas
Daniel P. Berrangé
Mukilan Thiyagarajan
Andrey Drobyshev
Stefan Weil
Michal Privoznik
Chenyi Qiang
Richard Henderson
Akihiko Odaki
Philippe Mathieu-Daudé
Jagannathan Raman
Alibek Omarov
Song Gao