The TLS handshake make take some time to complete, during which time an
I/O watch might be registered with the main loop. If the owner of the
I/O channel invokes qio_channel_close() while the handshake is waiting
to continue the I/O watch must be removed. Failing to remove it will
later trigger the completion callback which the owner is not expecting
to receive. In the case of the VNC server, this results in a SEGV as
vnc_disconnect_start() tries to shutdown a client connection that is
already gone / NULL.
CVE-2023-3354
Reported-by: jiangyegen <jiangyegen@huawei.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
TLS iochannel will inherit io_shutdown() from the master ioc, however we
missed to do that on the server side.
This will e.g. allow qemu_file_shutdown() to work on dest QEMU too for
migration.
Acked-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
This leakage can be seen through test-io-channel-tls:
$ ../configure --target-list=aarch64-softmmu --enable-sanitizers
$ make ./tests/unit/test-io-channel-tls
$ ./tests/unit/test-io-channel-tls
Indirect leak of 104 byte(s) in 1 object(s) allocated from:
#0 0x7f81d1725808 in __interceptor_malloc ../../../../src/libsanitizer/asan/asan_malloc_linux.cc:144
#1 0x7f81d135ae98 in g_malloc (/lib/x86_64-linux-gnu/libglib-2.0.so.0+0x57e98)
#2 0x55616c5d4c1b in object_new_with_propv ../qom/object.c:795
#3 0x55616c5d4a83 in object_new_with_props ../qom/object.c:768
#4 0x55616c5c5415 in test_tls_creds_create ../tests/unit/test-io-channel-tls.c:70
#5 0x55616c5c5a6b in test_io_channel_tls ../tests/unit/test-io-channel-tls.c:158
#6 0x7f81d137d58d (/lib/x86_64-linux-gnu/libglib-2.0.so.0+0x7a58d)
Indirect leak of 32 byte(s) in 1 object(s) allocated from:
#0 0x7f81d1725a06 in __interceptor_calloc ../../../../src/libsanitizer/asan/asan_malloc_linux.cc:153
#1 0x7f81d1472a20 in gnutls_dh_params_init (/lib/x86_64-linux-gnu/libgnutls.so.30+0x46a20)
#2 0x55616c6485ff in qcrypto_tls_creds_x509_load ../crypto/tlscredsx509.c:634
#3 0x55616c648ba2 in qcrypto_tls_creds_x509_complete ../crypto/tlscredsx509.c:694
#4 0x55616c5e1fea in user_creatable_complete ../qom/object_interfaces.c:28
#5 0x55616c5d4c8c in object_new_with_propv ../qom/object.c:807
#6 0x55616c5d4a83 in object_new_with_props ../qom/object.c:768
#7 0x55616c5c5415 in test_tls_creds_create ../tests/unit/test-io-channel-tls.c:70
#8 0x55616c5c5a6b in test_io_channel_tls ../tests/unit/test-io-channel-tls.c:158
#9 0x7f81d137d58d (/lib/x86_64-linux-gnu/libglib-2.0.so.0+0x7a58d)
...
SUMMARY: AddressSanitizer: 49143 byte(s) leaked in 184 allocation(s).
The docs for `g_source_add_child_source(source, child_source)` says
"source will hold a reference on child_source while child_source is
attached to it." Therefore, we should unreference the child source at
`qio_channel_tls_read_watch()` after attaching it to `source`. With this
change, ./tests/unit/test-io-channel-tls shows no leakages.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Matheus Tavares Bernardino <quic_mathbern@quicinc.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Since the TLS backend can read more data from the underlying QIOChannel
we introduce a minimal child GSource to notify if we still have more
data available to be read.
Signed-off-by: Antoine Damhet <antoine.damhet@shadow.tech>
Signed-off-by: Charles Frey <charles.frey@shadow.tech>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
MSG_PEEK peeks at the channel, The data is treated as unread and
the next read shall still return this data. This support is
currently added only for socket class. Extra parameter 'flags'
is added to io_readv calls to pass extra read flags like MSG_PEEK.
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Suggested-by: Daniel P. Berrange <berrange@redhat.com>
Signed-off-by: manish.mishra <manish.mishra@nutanix.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Add flags to io_writev and introduce io_flush as optional callback to
QIOChannelClass, allowing the implementation of zero copy writes by
subclasses.
How to use them:
- Write data using qio_channel_writev*(...,QIO_CHANNEL_WRITE_FLAG_ZERO_COPY),
- Wait write completion with qio_channel_flush().
Notes:
As some zero copy write implementations work asynchronously, it's
recommended to keep the write buffer untouched until the return of
qio_channel_flush(), to avoid the risk of sending an updated buffer
instead of the buffer state during write.
As io_flush callback is optional, if a subclass does not implement it, then:
- io_flush will return 0 without changing anything.
Also, some functions like qio_channel_writev_full_all() were adapted to
receive a flag parameter. That allows shared code between zero copy and
non-zero copy writev, and also an easier implementation on new flags.
Signed-off-by: Leonardo Bras <leobras@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Message-Id: <20220513062836.965425-3-leobras@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Make qio_channel_tls_shutdown thread-safe by using atomics when
accessing tioc->shutdown.
Signed-off-by: Lukas Straub <lukasstraub2@web.de>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <5bd8733f583f3558b32250fd0eb576b7aa756485.1609167865.git.lukasstraub2@web.de>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
There is no "version 2" of the "Lesser" General Public License.
It is either "GPL version 2.0" or "Lesser GPL version 2.1".
This patch replaces all occurrences of "Lesser GPL version 2" with
"Lesser GPL version 2.1" in comment section.
Signed-off-by: Chetan Pant <chetan4windows@gmail.com>
Acked-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20201014134033.14095-1-chetan4windows@gmail.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
GNUTLS takes a paranoid approach when seeing 0 bytes returned by the
underlying OS read() function. It will consider this an error and
return GNUTLS_E_PREMATURE_TERMINATION instead of propagating the 0
return value. It expects apps to arrange for clean termination at
the protocol level and not rely on seeing EOF from a read call to
detect shutdown. This is to harden apps against a malicious 3rd party
causing termination of the sockets layer.
This is unhelpful for the QEMU NBD code which does have a clean
protocol level shutdown, but still relies on seeing 0 from the I/O
channel read in the coroutine handling incoming replies.
The upshot is that when using a plain NBD connection shutdown is
silent, but when using TLS, the client spams the console with
Cannot read from TLS channel: Broken pipe
The NBD connection has, however, called qio_channel_shutdown()
at this point to indicate that it is done with I/O. This gives
the opportunity to optimize the code such that when the channel
has been shutdown in the read direction, the error code
GNUTLS_E_PREMATURE_TERMINATION gets turned into a '0' return
instead of an error.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20181119134228.11031-1-berrange@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
A new parameter "context" is added to qio_channel_tls_handshake() is to
allow the TLS to be run on a non-default context. Still, no functional
change.
Signed-off-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This is in preparation for making qio_channel_yield work on
AioContexts other than the main one.
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Message-id: 20170213135235.12274-6-pbonzini@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Currently the QIOTaskFunc signature takes an Object * for
the source, and an Error * for any error. We also need to
be able to provide a result pointer. Rather than continue
to add parameters to QIOTaskFunc, remove the existing
ones and simply pass the QIOTask object instead. This
has methods to access all the other data items required
in the callback impl.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Incrementing the reference in qio_task_get_source is
not necessary, since we're not running concurrently
with any other code touching the QIOTask. This
minimizes chances of further memory leaks.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Testing QIOChannel feature support can be done with a helper called
qio_channel_has_feature(). Setting feature support, however, was
done manually with a logical OR. This patch introduces a new helper
called qio_channel_set_feature() and makes use of it where applicable.
Signed-off-by: Felipe Franciosi <felipe@nutanix.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Parts of the code have been testing QIOChannel features directly with a
logical AND. This patch makes it all consistent by using the
qio_channel_has_feature() function to test if a feature is present.
Signed-off-by: Felipe Franciosi <felipe@nutanix.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Commit 57cb38b included qapi/error.h into qemu/osdep.h to get the
Error typedef. Since then, we've moved to include qemu/osdep.h
everywhere. Its file comment explains: "To avoid getting into
possible circular include dependencies, this file should not include
any other QEMU headers, with the exceptions of config-host.h,
compiler.h, os-posix.h and os-win32.h, all of which are doing a
similar job to this file and are under similar constraints."
qapi/error.h doesn't do a similar job, and it doesn't adhere to
similar constraints: it includes qapi-types.h. That's in excess of
100KiB of crap most .c files don't actually need.
Add the typedef to qemu/typedefs.h, and include that instead of
qapi/error.h. Include qapi/error.h in .c files that need it and don't
get it now. Include qapi-types.h in qom/object.h for uint16List.
Update scripts/clean-includes accordingly. Update it further to match
reality: replace config.h by config-target.h, add sysemu/os-posix.h,
sysemu/os-win32.h. Update the list of includes in the qemu/osdep.h
comment quoted above similarly.
This reduces the number of objects depending on qapi/error.h from "all
of them" to less than a third. Unfortunately, the number depending on
qapi-types.h shrinks only a little. More work is needed for that one.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
[Fix compilation without the spice devel packages. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Clean up includes so that osdep.h is included first and headers
which it implies are not included manually.
This commit was created with scripts/clean-includes.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1454089805-5470-14-git-send-email-peter.maydell@linaro.org
Add a QIOChannel subclass that can run the TLS protocol over
the top of another QIOChannel instance. The object provides a
simplified API to perform the handshake when starting the TLS
session. The layering of TLS over the underlying channel does
not have to be setup immediately. It is possible to take an
existing QIOChannel that has done some handshake and then swap
in the QIOChannelTLS layer. This allows for use with protocols
which start TLS right away, and those which start plain text
and then negotiate TLS.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Daniel P. Berrangé
Peter Xu
Matheus Tavares Bernardino
Antoine Damhet
manish.mishra
Leonardo Bras
Lukas Straub
Chetan Pant
Markus Armbruster
Paolo Bonzini
Felipe Franciosi
Peter Maydell