qemu_uuid_unparse() includes a trailing NUL when writing the uuid
string and the buffer size should be UUID_FMT_LEN + 1 bytes. Add a
define for this size and use it where required.
Cc: Fam Zheng <fam@euphon.net>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: "Denis V. Lunev" <den@openvz.org>
Signed-off-by: Cédric Le Goater <clg@redhat.com>
(cherry picked from commit 721da0396c)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
blk_insert_bs() requires that callers hold the AioContext lock for the
node that should be inserted. Take it.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-ID: <20230605085711.21261-4-kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
qatomic_mb_read and qatomic_mb_set were the very first atomic primitives
introduced for QEMU; their semantics are unclear and they provide a false
sense of safety.
The last use of qatomic_mb_read() has been removed, so delete it.
qatomic_mb_set() instead can survive as an optimized
qatomic_set()+smp_mb(), similar to Linux's smp_store_mb(), but
rename it to qatomic_set_mb() to match the order of the two
operations.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
We have several limitations and bugs worth fixing; they are
inter-related enough that it is not worth splitting this patch into
smaller pieces:
* ".5k" should work to specify 512, just as "0.5k" does
* "1.9999k" and "1." + "9"*50 + "k" should both produce the same
result of 2048 after rounding
* "1." + "0"*350 + "1B" should not be treated the same as "1.0B";
underflow in the fraction should not be lost
* "7.99e99" and "7.99e999" look similar, but our code was doing a
read-out-of-bounds on the latter because it was not expecting ERANGE
due to overflow. While we document that scientific notation is not
supported, and the previous patch actually fixed
qemu_strtod_finite() to no longer return ERANGE overflows, it is
easier to pre-filter than to try and determine after the fact if
strtod() consumed more than we wanted. Note that this is a
low-level semantic change (when endptr is not NULL, we can now
successfully parse with a scale of 'E' and then report trailing
junk, instead of failing outright with EINVAL); but an earlier
commit already argued that this is not a high-level semantic change
since the only caller passing in a non-NULL endptr also checks that
the tail is whitespace-only.
Fixes: https://gitlab.com/qemu-project/qemu/-/issues/1629
Fixes: cf923b78 ("utils: Improve qemu_strtosz() to have 64 bits of precision", 6.0.0)
Fixes: 7625a1ed ("utils: Use fixed-point arithmetic in qemu_strtosz", 6.0.0)
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Hanna Czenczek <hreitz@redhat.com>
Message-Id: <20230522190441.64278-20-eblake@redhat.com>
[eblake: tweak function comment for accuracy]
Previous patches changed all integral qemu_strto*() error paths to
guarantee that *value is never left uninitialized. Do likewise for
qemu_strtod. Also, tighten qemu_strtod_finite() to never return a
non-finite value (prior to this patch, we were rejecting "inf" with
-EINVAL and unspecified result 0.0, but failing "9e999" with -ERANGE
and HUGE_VAL - which is infinite on IEEE machines - despite our
function claiming to recognize only finite values).
Auditing callers, we have no external callers of qemu_strtod, and
among the callers of qemu_strtod_finite:
- qapi/qobject-input-visitor.c:qobject_input_type_number_keyval() and
qapi/string-input-visitor.c:parse_type_number() which reject all
errors (does not matter what we store)
- utils/cutils.c:do_strtosz() incorrectly assumes that *endptr points
to '.' on all failures (that is, it is not distinguishing between
EINVAL and ERANGE; and therefore still does the WRONG THING for
"9.9e999". The change here does not entirely fix that (a later
patch will tackle this more systematically), but at least it fixes
the read-out-of-bounds first diagnosed in
https://gitlab.com/qemu-project/qemu/-/issues/1629
- our testsuite, which we can update to match what we document
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Hanna Czenczek <hreitz@redhat.com>
CC: qemu-stable@nongnu.org
Message-Id: <20230522190441.64278-19-eblake@redhat.com>
Rather than open-coding two different ways to check for an unwanted
negative sign, reuse the same code in both functions. That way, if we
decide down the road to accept "-0" instead of rejecting it, we have
fewer places to change. Also, it means we now get ERANGE instead of
EINVAL for negative values in qemu_strtosz, which is reasonable for
what it represents. This in turn changes the expected output of a
couple of iotests.
The change is not quite complete: negative fractional scaled values
can trip us up. This will be fixed in a later patch addressing other
issues with fractional scaled values.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Hanna Czenczek <hreitz@redhat.com>
Message-Id: <20230522190441.64278-18-eblake@redhat.com>
Our goal in writing qemu_strtoi() and friends is to have an interface
harder to abuse than libc's strtol(). Leaving the return value
uninitialized on some but not all error paths does not lend itself
well to this goal; and our documentation wasn't helpful on what to
expect.
Note that the previous patch changed all qemu_strtosz() EINVAL error
paths to slam value to 0 rather than stay uninitialized, even when the
EINVAL eror occurs because of trailing junk. But for the remaining
integral qemu_strto*, it's easier to return the parsed value than to
force things back to zero, in part because of how check_strtox_error
works; in part because people expect that from libc strto* (while
there is no libc strtosz to compare to), and in part because doing so
creates less churn in the testsuite.
Here, the list of affected callers is much longer ('git grep
"qemu_strto[ui]" "*.c" "**/*.c" | grep -v tests/ |wc -l' outputs 107,
although a few of those are the implementation in in cutils.c), so
touching as little as possible is the wisest course of action.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Hanna Czenczek <hreitz@redhat.com>
Message-Id: <20230522190441.64278-17-eblake@redhat.com>
Making callers determine whether or not *value was populated on error
is not nice for usability. Pre-patch, we have unit tests that check
that *result is left unchanged on most EINVAL errors and set to 0 on
many ERANGE errors. This is subtly different from libc strtoumax()
behavior which returns UINT64_MAX on ERANGE errors, as well as
different from our parse_uint() which slams to 0 on EINVAL on the
grounds that we want our functions to be harder to mis-use than
strtoumax().
Let's audit callers:
- hw/core/numa.c:parse_numa() fixed in the previous patch to check for
errors
- migration/migration-hmp-cmds.c:hmp_migrate_set_parameter(),
monitor/hmp.c:monitor_parse_arguments(),
qapi/opts-visitor.c:opts_type_size(),
qapi/qobject-input-visitor.c:qobject_input_type_size_keyval(),
qemu-img.c:cvtnum_full(), qemu-io-cmds.c:cvtnum(),
target/i386/cpu.c:x86_cpu_parse_featurestr(), and
util/qemu-option.c:parse_option_size() appear to reject all failures
(although some with distinct messages for ERANGE as opposed to
EINVAL), so it doesn't matter what is in the value parameter on
error.
- All remaining callers are in the testsuite, where we can tweak our
expectations to match our new desired behavior.
Advancing to the end of the string parsed on overflow (ERANGE), while
still returning 0, makes sense (UINT64_MAX as a size is unlikely to be
useful); likewise, our size parsing code is complex enough that it's
easier to always return 0 when endptr is NULL but trailing garbage was
found, rather than trying to return the value of the prefix actually
parsed (no current caller cared about the value of the prefix).
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Hanna Czenczek <hreitz@redhat.com>
Message-Id: <20230522190441.64278-16-eblake@redhat.com>
Add some more strings that the user might send our way. In
particular, some of these additions include FIXME comments showing
where our parser doesn't quite behave the way we want.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Hanna Czenczek <hreitz@redhat.com>
Message-Id: <20230522190441.64278-15-eblake@redhat.com>
All the other qemu_strto* and parse_uint allow a NULL str. Having
qemu_strtosz not crash on qemu_strtosz(NULL, NULL, &value) is an easy
fix that adds some consistency between our string parsers.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Hanna Czenczek <hreitz@redhat.com>
Message-Id: <20230522190441.64278-13-eblake@redhat.com>
No need to copy-and-paste lots of boilerplate per string tested, when
we can consolidate that behind helper functions. Plus, this adds a
bit more coverage (we now test all strings both with and without
endptr, whereas before some tests skipped the NULL endptr case), which
exposed a SEGFAULT on qemu_strtosz(NULL, NULL, &val) that will be
fixed in an upcoming patch.
Note that duplicating boilerplate has one advantage lost here - a
failed test tells you which line number failed; but a helper function
does not show the call stack that reached the failure. Since we call
the helper more than once within many of the "unit tests", even the
unit test name doesn't point out which call is failing. But that only
matters when tests fail (they normally pass); at which point I'm
debugging the failures under gdb anyways, so I'm not too worried about
it.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Hanna Czenczek <hreitz@redhat.com>
Message-Id: <20230522190441.64278-12-eblake@redhat.com>
A quick search for 'qemu_strtosz' in the code base shows that outside
of the testsuite, the ONLY place that passes a non-NULL pointer to
@endptr of any variant of a size parser is in hmp.c (the 'o' parser of
monitor_parse_arguments), and that particular caller warns of
"extraneous characters at the end of line" unless the trailing bytes
are purely whitespace. Thus, it makes no semantic difference at the
high level whether we parse "1.5e1k" as "1" + ".5e1" + "k" (an attempt
to use scientific notation in strtod with a scaling suffix of 'k' with
no trailing junk, but which qemu_strtosz says should fail with
EINVAL), or as "1.5e" + "1k" (a valid size with scaling suffix of 'e'
for exabytes, followed by two junk bytes) - either way, any user
passing such a string will get an error message about a parse failure.
However, an upcoming patch to qemu_strtosz will fix other corner case
bugs in handling the fractional portion of a size, and in doing so, it
is easier to declare that qemu_strtosz() itself stops parsing at the
first 'e' rather than blindly consuming whatever strtod() will
recognize. Once that is fixed, the difference will be visible at the
low level (getting a valid parse with trailing garbage when @endptr is
non-NULL, while continuing to get -EINVAL when @endptr is NULL); this
is easier to demonstrate by moving the affected strings from
test_qemu_strtosz_invalid() (which declares them as always -EINVAL) to
test_qemu_strtosz_trailing() (where @endptr affects behavior, for now
with FIXME comments).
Note that a similar argument could be made for having "0x1.5" or
"0x1M" parse as 0x1 with ".5" or "M" as trailing junk, instead of
blindly treating it as -EINVAL; however, as these cases do not suffer
from the same problems as floating point, they are not worth changing
at this time.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Hanna Czenczek <hreitz@redhat.com>
Message-Id: <20230522190441.64278-11-eblake@redhat.com>
It's hard to tweak code for consistency if I can't prove what will or
won't break from those tweaks. Time to add unit tests for
qemu_strtod() and qemu_strtod_finite().
Among other things, I wrote a check whether we have C99 semantics for
strtod("0x1") (which MUST parse hex numbers) rather than C89 (which
must stop parsing at 'x'). These days, I suspect that is okay; but if
it fails CI checks, knowing the difference will help us decide what we
want to do about it. Note that C2x, while not final at the time of
this patch, has been considering whether to make strtol("0b1") parse
as 1 with no slop instead of the C17 parse of 0 with slop "b1"; that
decision may also bleed over to strtod(). But for now, I didn't think
it worth adding unit tests on that front (to strtol or strtod) as
things may still change.
Likewise, there are plenty more corner cases of strtod proper that I
don't explicitly test here, but there are enough unit tests added here
that it covers all the branches reached in our wrappers. In
particular, it demonstrates the difference on when *value is left
uninitialized, which an upcoming patch will normalize.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Hanna Czenczek <hreitz@redhat.com>
Message-Id: <20230522190441.64278-10-eblake@redhat.com>
All the qemu_strto*() functions permit a NULL endptr, just like their
libc counterparts, leaving parse_uint() as the oddball that caused
SEGFAULT on NULL and required the user to call parse_uint_full()
instead. Relax things for consistency, even though the testsuite is
the only impacted caller. Add one more unit test to ensure even
parse_uint_full(NULL, 0, &value) works. This also fixes our code to
uniformly favor EINVAL over ERANGE when both apply.
Also fixes a doc mismatch @v vs. a parameter named value.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Hanna Czenczek <hreitz@redhat.com>
Message-Id: <20230522190441.64278-9-eblake@redhat.com>
It's already confusing that we have two very similar functions for
wrapping the parse of a 64-bit unsigned value, differing mainly on
whether they permit leading '-'. Adjust the signature of parse_uint()
and parse_uint_full() to be like all of qemu_strto*(): put the result
parameter last, use the same types (uint64_t and unsigned long long
have the same width, but are not always the same type), and mark
endptr const (this latter change only affects the rare caller of
parse_uint). Adjust all callers in the tree.
While at it, note that since cutils.c already includes:
QEMU_BUILD_BUG_ON(sizeof(int64_t) != sizeof(long long));
we are guaranteed that the result of parse_uint* cannot exceed
UINT64_MAX (or the build would have failed), so we can drop
pre-existing dead comparisons in opts-visitor.c that were never false.
Reviewed-by: Hanna Czenczek <hreitz@redhat.com>
Message-Id: <20230522190441.64278-8-eblake@redhat.com>
[eblake: Drop dead code spotted by Markus]
Signed-off-by: Eric Blake <eblake@redhat.com>
While we were matching 32-bit strtol in qemu_strtoi, our use of a
64-bit parse was leaking through for some inaccurate answers in
qemu_strtoui in comparison to a 32-bit strtoul (see the unit test for
examples). The comment for that function even described what we have
to do for a correct parse, but didn't implement it correctly: since
strtoull checks for overflow against the wrong values and then
negates, we have to temporarily undo negation before checking for
overflow against our desired value.
Our int wrappers would be a lot easier to write if libc had a
guaranteed 32-bit parser even on platforms with 64-bit long.
Whether we parse C2x binary strings like "0b1000" is currently up to
what libc does; our unit tests intentionally don't cover that at the
moment, though.
Fixes: 473a2a331e ("cutils: add qemu_strtoi & qemu_strtoui parsers for int/unsigned int types", v2.12.0)
Signed-off-by: Eric Blake <eblake@redhat.com>
CC: qemu-stable@nongnu.org
Message-Id: <20230522190441.64278-6-eblake@redhat.com>
Reviewed-by: Hanna Czenczek <hreitz@redhat.com>
We have quite a few undertested and underdocumented integer parsing
corner cases. To ensure that any changes we make in the code are
intentional rather than accidental semantic changes, it is time to add
more unit tests of existing behavior.
In particular, this demonstrates that parse_uint() and qemu_strtou64()
behave differently. For "-0", it's hard to argue why parse_uint needs
to reject it (it's not a negative integer), but the documentation sort
of mentions it; but it is intentional that all other negative values
are treated as ERANGE with value 0 (compared to qemu_strtou64()
treating "-2" as success and UINT64_MAX-1, for example).
Also, when mixing overflow/underflow with a check for no trailing
junk, parse_uint_full favors ERANGE over EINVAL, while qemu_strto[iu]*
favor EINVAL. This behavior is outside the C standard, so we can pick
whatever we want, but it would be nice to be consistent.
Note that C requires that "9223372036854775808" fail strtoll() with
ERANGE/INT64_MAX, but "-9223372036854775808" pass with INT64_MIN; we
weren't testing this. For strtol(), the behavior depends on whether
long is 32- or 64-bits (the cutoff point either being the same as
strtoll() or at "-2147483648"). Meanwhile, C is clear that
"-18446744073709551615" pass stroull() (but not strtoll) with value 1,
even though we want it to fail parse_uint(). And although
qemu_strtoui() has no C counterpart, it makes more sense if we design
it like 32-bit strtoul() (that is, where "-4294967296" be an alternate
acceptable spelling for "1", but "-0xffffffff00000001" should be
treated as overflow and return 0xffffffff rather than 1). We aren't
there yet, so some of the tests added in this patch have FIXME
comments.
However, note that C2x will (likely) be adding a SILENT semantic
change, where C17 strtol("0b1", &ep, 2) returns 0 with ep="b1", but
C2x will have it return 1 with ep="". I did not feel like adding
testing for those corner cases, in part because the next version of C
is not standard and libc support for binary parsing is not yet
wide-spread (as of this patch, glibc.git still misparses bare "0b":
https://sourceware.org/bugzilla/show_bug.cgi?id=30371).
Message-Id: <20230522190441.64278-5-eblake@redhat.com>
[eblake: fix a few typos spotted by Hanna]
Reviewed-by: Hanna Czenczek <hreitz@redhat.com>
[eblake: fix typo on platforms with 32-bit long]
Signed-off-by: Eric Blake <eblake@redhat.com>
We are inconsistent on the contents of *value after a strto* parse
failure. I found the following behaviors:
- parse_uint() and parse_uint_full(), which document that *value is
slammed to 0 on all EINVAL failures and 0 or UINT_MAX on ERANGE
failures, and has unit tests for that (note that parse_uint requires
non-NULL endptr, and does not fail with EINVAL for trailing junk)
- qemu_strtosz(), which leaves *value untouched on all failures (both
EINVAL and ERANGE), and has unit tests but not documentation for
that
- qemu_strtoi() and other integral friends, which document *value on
ERANGE failures but is unspecified on EINVAL (other than implicitly
by comparison to libc strto*); there, *value is untouched for NULL
string, slammed to 0 on no conversion, and left at the prefix value
on NULL endptr; unit tests do not consistently check the value
- qemu_strtod(), which documents *value on ERANGE failures but is
unspecified on EINVAL; there, *value is untouched for NULL string,
slammed to 0.0 for no conversion, and left at the prefix value on
NULL endptr; there are no unit tests (other than indirectly through
qemu_strtosz)
- qemu_strtod_finite(), which documents *value on ERANGE failures but
is unspecified on EINVAL; there, *value is left at the prefix for
'inf' or 'nan' and untouched in all other cases; there are no unit
tests (other than indirectly through qemu_strtosz)
Upcoming patches will change behaviors for consistency, but it's best
to first have more unit test coverage to see the impact of those
changes.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Hanna Czenczek <hreitz@redhat.com>
Message-Id: <20230522190441.64278-4-eblake@redhat.com>
When debugging test failures, seeing unsigned values as large positive
values rather than negative values matters (assuming glib 2.78+; given
that I just fixed a bug in glib 2.76 [1] where g_assert_cmpuint
displays signed instead of unsigned values). No impact when the test
is passing, but using a consistent style will matter more in upcoming
test additions. Also, some tests are better with cmphex.
While at it, fix some spacing and minor typing issues spotted nearby.
[1] https://gitlab.gnome.org/GNOME/glib/-/issues/2997
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Hanna Czenczek <hreitz@redhat.com>
Message-Id: <20230522190441.64278-3-eblake@redhat.com>
glib documentation[1] is clear: g_assert() should be avoided in unit
tests because it is ineffective if G_DISABLE_ASSERT is defined; unit
tests should stick to constructs based on g_assert_true() instead.
Note that since commit 262a69f428, we intentionally state that you
cannot define G_DISABLE_ASSERT while building qemu; but our code can
be copied to other projects without that restriction, so we should be
consistent.
For most of the replacements in this patch, using g_assert_cmpstr()
would be a regression in quality - although it would helpfully display
the string contents of both pointers on test failure, here, we really
do care about pointer equality, not just string content equality. But
when a NULL pointer is expected, g_assert_null works fine.
[1] https://libsoup.org/glib/glib-Testing.html#g-assert
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Hanna Czenczek <hreitz@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230522190441.64278-2-eblake@redhat.com>
All callers now pass is_external=false to aio_set_fd_handler() and
aio_set_event_notifier(). The aio_disable_external() API that
temporarily disables fd handlers that were registered is_external=true
is therefore dead code.
Remove aio_disable_external(), aio_enable_external(), and the
is_external arguments to aio_set_fd_handler() and
aio_set_event_notifier().
The entire test-fdmon-epoll test is removed because its sole purpose was
testing aio_disable_external().
Parts of this patch were generated using the following coccinelle
(https://coccinelle.lip6.fr/) semantic patch:
@@
expression ctx, fd, is_external, io_read, io_write, io_poll, io_poll_ready, opaque;
@@
- aio_set_fd_handler(ctx, fd, is_external, io_read, io_write, io_poll, io_poll_ready, opaque)
+ aio_set_fd_handler(ctx, fd, io_read, io_write, io_poll, io_poll_ready, opaque)
@@
expression ctx, notifier, is_external, io_read, io_poll, io_poll_ready;
@@
- aio_set_event_notifier(ctx, notifier, is_external, io_read, io_poll, io_poll_ready)
+ aio_set_event_notifier(ctx, notifier, io_read, io_poll, io_poll_ready)
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20230516190238.8401-21-stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
For simplicity, always run BlockDevOps .drained_begin/end/poll()
callbacks in the main loop thread. This makes it easier to implement the
callbacks and avoids extra locks.
Move the function pointer declarations from the I/O Code section to the
Global State section for BlockDevOps, BdrvChildClass, and BlockDriver.
Narrow IO_OR_GS_CODE() to GLOBAL_STATE_CODE() where appropriate.
The test-bdrv-drain test case calls bdrv_drain() from an IOThread. This
is now only allowed from coroutine context, so update the test case to
run in a coroutine.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20230516190238.8401-11-stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
When opening the 'file' child moves bs to an iothread, we need to hold
the AioContext lock of it before we can call raw_apply_options() (and
more specifically, bdrv_getlength() inside of it).
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20230525124713.401149-8-kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The function documentation already says that all callers must hold the
main AioContext lock, but not all of them do. This can cause assertion
failures when functions called by bdrv_open() try to drop the lock. Fix
a few more callers to take the lock before calling bdrv_open().
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20230525124713.401149-4-kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Perform the function selection once, and only if CONFIG_AVX512_OPT
is enabled. Centralize the selection to xbzrle.c, instead of
spreading the init across 3 files.
Remove xbzrle-bench.c. The benefit of being able to benchmark
the different implementations is less important than not peeking
into the internals of the implementation.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Cc: qemu-stable@nongnu.org
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20230502184134.534703-3-stefanha@redhat.com>
[kwolf: Restrict to CONFIG_POSIX, Windows doesn't support polling]
Tested-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
bdrv_unref() is a no_coroutine_fn, so calling it from coroutine context
is invalid. Use bdrv_co_unref() instead.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20230510203601.418015-7-kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
If we take a reader lock, we can't call any functions that take a writer
lock internally without causing deadlocks once the reader lock is
actually enforced in the main thread, too. Take the reader lock only
where it is actually needed.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20230510203601.418015-6-kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
test-bdrv-drain contains a few test cases that are run both in coroutine
and non-coroutine context. Running the entire code including the setup
and shutdown in coroutines is incorrect because graph modifications can
generally not happen in coroutines.
Change the test so that creating and destroying the test nodes and
BlockBackends always happens outside of coroutine context.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20230504115750.54437-6-kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Instead of using qatomic_mb_{read,set} mindlessly, just use a per-coroutine
flag that requires no synchronization.
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The remaining use of mb_read/mb_set is just to force a thread to exit
eventually. It does not order two memory accesses and therefore can be
just read/set.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This commit adds a test to ensure `merged` functions as expected.
We also add a negative test to ensure we haven't regressed previous
functionality.
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Daniel Xu <dxu@dxuuu.xyz>
Signed-off-by: Konstantin Kostiuk <kkostiuk@redhat.com>
Devices can pass their MemoryReentrancyGuard (from their DeviceState),
when creating new BHes. Then, the async API will toggle the guard
before/after calling the BH call-back. This prevents bh->mmio reentrancy
issues.
Signed-off-by: Alexander Bulekov <alxndr@bu.edu>
Reviewed-by: Darren Kenny <darren.kenny@oracle.com>
Message-Id: <20230427211013.2994127-3-alxndr@bu.edu>
[thuth: Fix "line over 90 characters" checkpatch.pl error]
Signed-off-by: Thomas Huth <thuth@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQJGBAABCAAwFiEENUvIs9frKmtoZ05fOHC0AOuRhlMFAmRIvOkSHGFybWJydUBy
ZWRoYXQuY29tAAoJEDhwtADrkYZTX3MQAIqrKQbOzQ81/cDZ7aeLOroDoGYf1Cs0
0NiEVlyoblWNzL3HraGgXiNRTP+zaG/TcFKza1nz8qjdkxWxBjdbfF5Lm6mQf5Zo
tcHUjksmnUlPkLYSOyEjfY9SNvcS6g7djE/NF5lbJtzYGZScZpLarELR7oUvrcXR
AEiw8N5FZXp+j6cTeWvrLzSqz9qBsFJUCGcGER0T/Mt5MlUwDexE1xe7g8oD5l+b
s0jeQr1PTZm5k6ehajQtgbHvAkgH8xVTKqbB/U5iz4VhYriH+IPEOtfCFt6/1soz
pVkYikJpazCvQMjqnWu9dE1onthgSsEIOV29kFU0Kr8ATZuJBQMuLVp4hSsbKANj
BUVyL2/fUsIp7gd+KikXUOjKYajxek6Q2YLAPpL+1pBCTql/PBQ7td8CECdiv/9e
Xh50q+BGvyEiyoyf4EEpaLXUZog605WHEaODj9uPtNHJP9x6Rqt93FUsdWUtt/k9
hJ8RSKy8njr0vxGoJkj89m2XfCwtuX3VQ5IXvv/If4U5Y4+JhcLtiqW+Njh8fAM4
ZwIrlUYG7inLUKFVcQ3sEGpaj611i5ixIxctUvEiggZX+fPeSFKYUr+Rq8WXM8gv
suLXz7VF6H4Sw30lCvdQ4LSungbzlYAtQYpmdEQGoM8iasIi4PoDf0cTYBbMYHDX
+pZvWC50cVtf
=wLx6
-----END PGP SIGNATURE-----
Merge tag 'pull-qapi-2023-04-26' of https://repo.or.cz/qemu/armbru into staging
QAPI patches patches for 2023-04-26
# -----BEGIN PGP SIGNATURE-----
#
# iQJGBAABCAAwFiEENUvIs9frKmtoZ05fOHC0AOuRhlMFAmRIvOkSHGFybWJydUBy
# ZWRoYXQuY29tAAoJEDhwtADrkYZTX3MQAIqrKQbOzQ81/cDZ7aeLOroDoGYf1Cs0
# 0NiEVlyoblWNzL3HraGgXiNRTP+zaG/TcFKza1nz8qjdkxWxBjdbfF5Lm6mQf5Zo
# tcHUjksmnUlPkLYSOyEjfY9SNvcS6g7djE/NF5lbJtzYGZScZpLarELR7oUvrcXR
# AEiw8N5FZXp+j6cTeWvrLzSqz9qBsFJUCGcGER0T/Mt5MlUwDexE1xe7g8oD5l+b
# s0jeQr1PTZm5k6ehajQtgbHvAkgH8xVTKqbB/U5iz4VhYriH+IPEOtfCFt6/1soz
# pVkYikJpazCvQMjqnWu9dE1onthgSsEIOV29kFU0Kr8ATZuJBQMuLVp4hSsbKANj
# BUVyL2/fUsIp7gd+KikXUOjKYajxek6Q2YLAPpL+1pBCTql/PBQ7td8CECdiv/9e
# Xh50q+BGvyEiyoyf4EEpaLXUZog605WHEaODj9uPtNHJP9x6Rqt93FUsdWUtt/k9
# hJ8RSKy8njr0vxGoJkj89m2XfCwtuX3VQ5IXvv/If4U5Y4+JhcLtiqW+Njh8fAM4
# ZwIrlUYG7inLUKFVcQ3sEGpaj611i5ixIxctUvEiggZX+fPeSFKYUr+Rq8WXM8gv
# suLXz7VF6H4Sw30lCvdQ4LSungbzlYAtQYpmdEQGoM8iasIi4PoDf0cTYBbMYHDX
# +pZvWC50cVtf
# =wLx6
# -----END PGP SIGNATURE-----
# gpg: Signature made Wed 26 Apr 2023 06:55:53 AM BST
# gpg: using RSA key 354BC8B3D7EB2A6B68674E5F3870B400EB918653
# gpg: issuer "armbru@redhat.com"
# gpg: Good signature from "Markus Armbruster <armbru@redhat.com>" [undefined]
# gpg: aka "Markus Armbruster <armbru@pond.sub.org>" [undefined]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 354B C8B3 D7EB 2A6B 6867 4E5F 3870 B400 EB91 8653
* tag 'pull-qapi-2023-04-26' of https://repo.or.cz/qemu/armbru:
qapi: allow unions to contain further unions
qapi: Improve specificity of type/member descriptions
qapi: support updating expected test output via make
qapi: Require boxed for conditional command and event arguments
qapi: Fix code generated for optional conditional struct member
tests/qapi-schema: Cover optional conditional struct member
tests/qapi-schema: Clean up positive test for conditionals
tests/qapi-schema: Rename a few conditionals
tests/qapi-schema: Improve union discriminator coverage
qapi: Fix to reject 'data': 'mumble' in struct
qapi: Fix error message when type name or array is expected
qapi: Simplify code a bit after previous commits
qapi: Improve error message for unexpected array types
qapi: Split up check_type()
qapi: Clean up after removal of simple unions
qapi/schema: Use super()
qapi: Fix error message format regression
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This extends the QAPI schema validation to permit unions inside unions,
provided the checks for clashing fields pass.
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20230420102619.348173-4-berrange@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20230309084456.304669-8-pbonzini@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
thread_pool_submit_aio() is always called on a pool taken from
qemu_get_current_aio_context(), and that is the only intended
use: each pool runs only in the same thread that is submitting
work to it, it can't run anywhere else.
Therefore simplify the thread_pool_submit* API and remove the
ThreadPool function parameter.
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Message-Id: <20230203131731.851116-5-eesposit@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Linux keyring support is protected by CONFIG_KEYUTILS.
We also need CONFIG_SECRET_KEYRING.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-Id: <20230414114252.1136-1-quintela@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Bring the files in line with the QEMU coding style, with spaces
for indentation.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/378
Signed-off-by: Yeqi Fu <fufuyqqqqqq@gmail.com>
Message-Id: <20230315032649.57568-1-fufuyqqqqqq@gmail.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The blockjob/complete_in_standby test is flaky and fails
intermittently in CI:
172/621 qemu:unit / test-blockjob
ERROR 0.26s killed by signal 6 SIGABRT
11:03:46 MALLOC_PERTURB_=176
G_TEST_SRCDIR=/Users/pm215/src/qemu-for-merges/tests/unit
G_TEST_BUILDDIR=/Users/pm215/src/qemu-for-merges/build/all/tests/unit
/Users/pm215/src/qemu-for-merges/build/all/tests/unit/test-blockjob
--tap -k
----------------------------------- output -----------------------------------
stdout:
# random seed: R02S8c79d6e1c01ce0b25475b2210a253242
1..9
# Start of blockjob tests
ok 1 /blockjob/ids
stderr:
Assertion failed: (job->status == JOB_STATUS_STANDBY), function
test_complete_in_standby, file ../../tests/unit/test-blockjob.c, line
499.
Seen on macOS/x86_64, FreeBSD 13/x86_64, msys2-64bit, eg:
https://gitlab.com/qemu-project/qemu/-/jobs/3872508803https://gitlab.com/qemu-project/qemu/-/jobs/3950667240
Disable this subtest until somebody has time to investigate.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20230317143534.1481947-1-peter.maydell@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Use a close() wrapper instead, so that we don't need to worry about
closesocket() vs close() anymore, let's hope.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Message-Id: <20230221124802.4103554-17-marcandre.lureau@redhat.com>
This can help debugging issues or develop, when error handling is
introduced.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Message-Id: <20230221124802.4103554-6-marcandre.lureau@redhat.com>
Because they are actually sockets...
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20230221124802.4103554-3-marcandre.lureau@redhat.com>
This implements the basic migration support in the back end, with unit
tests that give additional confidence in the node-counting already in
the tree.
However, the existing PV back ends like xen-disk don't support migration
yet. They will reset the ring and fail to continue where they left off.
We will fix that in future, but not in time for the 8.0 release.
Since there's also an open question of whether we want to serialize the
full XenStore or only the guest-owned nodes in /local/domain/${domid},
for now just mark the XenStore device as unmigratable.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Paul Durrant <paul@xen.org>
Cédric Le Goater
Konstantin Kostiuk
Kevin Wolf
Paolo Bonzini
Eric Blake
Stefan Hajnoczi
Richard Henderson
Daniel Xu
Alexander Bulekov
Daniel P. Berrangé
Emanuele Giuseppe Esposito
Juan Quintela
Emilio Cota
Yeqi Fu
Peter Maydell
Marc-André Lureau
David Woodhouse