This parameter is to be used in the processor_id entry in the type 4
table.
This parameter is set as optional and if left will use the values from
the CPU model.
This enables hiding the host information from the guest and allowing AMD
VMs to run pretending to be Intel for some userspace software concerns.
Reviewed-by: Peter Foley <pefoley@google.com>
Reviewed-by: Titus Rwantare <titusr@google.com>
Signed-off-by: Patrick Venture <venture@google.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20220125163118.1011809-1-venture@google.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Since change dcf359832eec02 ("hw/smbios: fix table memory corruption with large memory vms")
we reserve additional space between handle numbers of tables 17 and 19 for
large VMs. This may cause table 19 to collide with table 32 in their handle
numbers for those large VMs. This change adds an assertion to ensure numbers
do not collide. If they do, qemu crashes with useful debug information for
taking additional steps.
Signed-off-by: Ani Sinha <ani@anisinha.ca>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20220223143322.927136-8-ani@anisinha.ca>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The current smbios table implementation splits the main memory in 16 GiB
(DIMM like) chunks. With the current smbios table assignment code, we can have
only 512 such chunks before the 16 bit handle numbers in the header for tables
17 and 19 conflict. A guest with more than 8 TiB of memory will hit this
limitation and would fail with the following assertion in isa-debugcon:
ASSERT_EFI_ERROR (Status = Already started)
ASSERT /builddir/build/BUILD/edk2-ca407c7246bf/OvmfPkg/SmbiosPlatformDxe/SmbiosPlatformDxe.c(125): !EFI_ERROR (Status)
This change adds an additional offset between tables 17 and 19 handle numbers
when configuring VMs larger than 8 TiB of memory. The value of the offset is
calculated to be equal to the additional space required to be reserved
in order to accomodate more DIMM entries without the table handles colliding.
In normal cases where the VM memory is smaller or equal to 8 TiB, this offset
value is 0. Hence in this case, no additional handle numbers are reserved and
table handle values remain as before.
Since smbios memory is not transmitted over the wire during migration,
this change can break migration for large memory vms if the guest is in the
middle of generating the tables during migration. However, in those
situations, qemu generates invalid table handles anyway with or without this
fix. Hence, we do not preserve the old bug by introducing compat knobs/machine
types.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=2023977
Signed-off-by: Ani Sinha <ani@anisinha.ca>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20220223143322.927136-7-ani@anisinha.ca>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This is a minor cleanup. Using macro definitions makes the code more
readable. It is at once clear which tables use which handle numbers in their
header. It also makes it easy to calculate the gaps between the numbers and
update them if needed.
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Ani Sinha <ani@anisinha.ca>
Message-Id: <20220223143322.927136-6-ani@anisinha.ca>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Rename the enums to match the naming style used by QAPI, and to
use "32" and "64" instead of "20" and "31". This will allow us
to more easily move the enum to the QAPI schema later.
About the naming choice: "SMBIOS 2.1 entry point"/"SMBIOS 3.0
entry point" and "32-bit entry point"/"64-bit entry point" are
synonymous in the SMBIOS specification. However, the phrases
"32-bit entry point" and "64-bit entry point" are used more often.
The new names also avoid confusion between the entry point format
and the actual SMBIOS version reported in the entry point
structure. For example: currently the 32-bit entry point
actually report SMBIOS 2.8 support, not 2.1.
Based on portions of a patch submitted by Daniel P. Berrangé.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20211026151100.1691925-2-ehabkost@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Type 41 defines the attributes of devices that are onboard. The
original intent was to imply the BIOS had some level of control over
the enablement of the associated devices.
If network devices are present in this table, by default, udev will
name the corresponding interfaces enoX, X being the instance number.
Without such information, udev will fallback to using the PCI ID and
this usually gives ens3 or ens4. This can be a bit annoying as the
name of the network card may depend on the order of options and may
change if a new PCI device is added earlier on the commande line.
Being able to provide SMBIOS type 41 entry ensure the name of the
interface won't change and helps the user guess the right name without
booting a first time.
This can be invoked with:
$QEMU -netdev user,id=internet
-device virtio-net-pci,mac=50:54:00:00:00:42,netdev=internet,id=internet-dev \
-smbios type=41,designation='Onboard LAN',instance=1,kind=ethernet,pcidev=internet-dev
The PCI segment is assumed to be 0. This should hold true for most
cases.
$ dmidecode -t 41
# dmidecode 3.3
Getting SMBIOS data from sysfs.
SMBIOS 2.8 present.
Handle 0x2900, DMI type 41, 11 bytes
Onboard Device
Reference Designation: Onboard LAN
Type: Ethernet
Status: Enabled
Type Instance: 1
Bus Address: 0000:00:09.0
$ ip -brief a
lo UNKNOWN 127.0.0.1/8 ::1/128
eno1 UP 10.0.2.14/24 fec0::5254:ff:fe00:42/64 fe80::5254:ff:fe00:42/64
Signed-off-by: Vincent Bernat <vincent@bernat.ch>
Message-Id: <20210401171138.62970-1-vincent@bernat.ch>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Fix the following Coverity issue (RESOURCE_LEAK):
CID 1432879: Resource leak
Handle variable fd going out of scope leaks the handle.
Replace a close() call by qemu_close() since the handle is
opened with qemu_open().
Fixes: bb99f4772f ("hw/smbios: support loading OEM strings values from a file")
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20201030152742.1553968-1-philmd@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The SMBIOS 2.1 entry point uses a uint16 data type for reporting the
total length of the tables. If the user passes -smbios configuration to
QEMU that causes the table size to exceed this limit then various bad
behaviours result, including
- firmware hangs in an infinite loop
- firmware triggers a KVM crash on bad memory access
- firmware silently discards user's SMBIOS data replacing it with
a generic data set.
Limiting the size to 0xffff in QEMU avoids triggering most of these
problems. There is a remaining bug in SeaBIOS which tries to prepend its
own data for table 0, and does not check whether there is sufficient
space before attempting this.
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20200923133804.2089190-3-berrange@redhat.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Some applications want to pass quite large values for the OEM strings
entries. Rather than having huge strings on the command line, it would
be better to load them from a file, as supported with -fw_cfg.
This introduces the "path" parameter allowing for:
$ echo -n "thisthing" > mydata.txt
$ qemu-system-x86_64 \
-smbios type=11,value=something \
-smbios type=11,path=mydata.txt \
-smbios type=11,value=somemore \
...other args...
Now in the guest
$ dmidecode -t 11
Getting SMBIOS data from sysfs.
SMBIOS 2.8 present.
Handle 0x0E00, DMI type 11, 5 bytes
OEM Strings
String 1: something
String 2: thisthing
String 3: somemore
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20200923133804.2089190-2-berrange@redhat.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Common VM users sometimes care about CPU speed, so we add two new
options to allow VM vendors to present CPU speed to their users.
Normally these information can be fetched from host smbios.
Strictly speaking, the "max speed" and "current speed" in type 4
are not really for the max speed and current speed of processor, for
"max speed" identifies a capability of the system, and "current speed"
identifies the processor's speed at boot (see smbios spec), but some
applications do not tell the differences.
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Ying Fang <fangying1@huawei.com>
Signed-off-by: Heyi Guo <guoheyi@huawei.com>
Message-Id: <20200806035634.376-2-fangying1@huawei.com>
When all we do with an Error we receive into a local variable is
propagating to somewhere else, we can just as well receive it there
right away. Convert
if (!foo(..., &err)) {
...
error_propagate(errp, err);
...
return ...
}
to
if (!foo(..., errp)) {
...
...
return ...
}
where nothing else needs @err. Coccinelle script:
@rule1 forall@
identifier fun, err, errp, lbl;
expression list args, args2;
binary operator op;
constant c1, c2;
symbol false;
@@
if (
(
- fun(args, &err, args2)
+ fun(args, errp, args2)
|
- !fun(args, &err, args2)
+ !fun(args, errp, args2)
|
- fun(args, &err, args2) op c1
+ fun(args, errp, args2) op c1
)
)
{
... when != err
when != lbl:
when strict
- error_propagate(errp, err);
... when != err
(
return;
|
return c2;
|
return false;
)
}
@rule2 forall@
identifier fun, err, errp, lbl;
expression list args, args2;
expression var;
binary operator op;
constant c1, c2;
symbol false;
@@
- var = fun(args, &err, args2);
+ var = fun(args, errp, args2);
... when != err
if (
(
var
|
!var
|
var op c1
)
)
{
... when != err
when != lbl:
when strict
- error_propagate(errp, err);
... when != err
(
return;
|
return c2;
|
return false;
|
return var;
)
}
@depends on rule1 || rule2@
identifier err;
@@
- Error *err = NULL;
... when != err
Not exactly elegant, I'm afraid.
The "when != lbl:" is necessary to avoid transforming
if (fun(args, &err)) {
goto out
}
...
out:
error_propagate(errp, err);
even though other paths to label out still need the error_propagate().
For an actual example, see sclp_realize().
Without the "when strict", Coccinelle transforms vfio_msix_setup(),
incorrectly. I don't know what exactly "when strict" does, only that
it helps here.
The match of return is narrower than what I want, but I can't figure
out how to express "return where the operand doesn't use @err". For
an example where it's too narrow, see vfio_intx_enable().
Silently fails to convert hw/arm/armsse.c, because Coccinelle gets
confused by ARMSSE being used both as typedef and function-like macro
there. Converted manually.
Line breaks tidied up manually. One nested declaration of @local_err
deleted manually. Preexisting unwanted blank line dropped in
hw/riscv/sifive_e.c.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200707160613.848843-35-armbru@redhat.com>
Nothing from "sysemu/cpus.h" is used by smbios.c, remove the include.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <20200109112504.32622-1-philmd@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Not all devices have fwinfo (like the coming PCI one), so ignore
them if the their fwinfo function is NULL.
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
migration/qemu-file.h neglects to include it even though it needs
ram_addr_t. Fix that. Drop a few superfluous inclusions elsewhere.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190812052359.30071-14-armbru@redhat.com>
To get rid of the global smp_* variables we're currently using, it's recommended
to pass MachineState in the list of incoming parameters for functions that use
global smp variables, thus some redundant parameters are dropped. It's applied
for legacy smbios_*(), *_machine_reset(), hot_add_cpu() and mips *_create_cpu().
Suggested-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Like Xu <like.xu@linux.intel.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20190518205428.90532-3-like.xu@linux.intel.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
The Kconfig files were generated mostly with this script:
for i in `grep -ho CONFIG_[A-Z0-9_]* default-configs/* | sort -u`; do
set fnord `git grep -lw $i -- 'hw/*/Makefile.objs' `
shift
if test $# = 1; then
cat >> $(dirname $1)/Kconfig << EOF
config ${i#CONFIG_}
bool
EOF
git add $(dirname $1)/Kconfig
else
echo $i $*
fi
done
sed -i '$d' hw/*/Kconfig
for i in hw/*; do
if test -d $i && ! test -f $i/Kconfig; then
touch $i/Kconfig
git add $i/Kconfig
fi
done
Whenever a symbol is referenced from multiple subdirectories, the
script prints the list of directories that reference the symbol.
These symbols have to be added manually to the Kconfig files.
Kconfig.host and hw/Kconfig were created manually.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Yang Zhong <yang.zhong@intel.com>
Message-Id: <20190123065618.3520-27-yang.zhong@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The type 3 SMBIOS structure[1] ends with fields
...
0x14 - contained element count
0x15 - contained element record length
0x16 - sku number
The smbios_type_3 struct missed the contained element record
length field, causing sku number to be reported at the wrong
offset.
[1] https://www.dmtf.org/sites/default/files/standards/documents/DSP0134_3.1.1.pdf
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20190215153600.1770727-1-berrange@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Fixes: e41fca3da7
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
SMBIOS is just another firmware interface used by some QEMU models.
We will later introduce more firmware interfaces in this subdirectory.
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This header only declare a single function: smbios_build_type_38_table().
We already have a header that declares such functions: "smbios_build.h".
Move the declaration and remove the header.
Reviewed-by: Corey Minyard <cminyard@mvista.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
All the consumers of "hw/smbios/ipmi.h" are located in hw/smbios/.
There is no need to have this include publicly exposed,
reduce the visibility by moving it in hw/smbios/.
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The load_image() function is deprecated, as it does not let the
caller specify how large the buffer to read the file into is.
Instead use load_image_size().
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 20181130151712.2312-4-peter.maydell@linaro.org
Calling error_report() in a function that takes an Error ** argument
is suspicious. smbios_entry_add() does that, and then exit()s. It
also passes &error_fatal to qemu_opts_validate(). Both wrong, but
currently harmless, as its only caller passes &error_fatal. Messed up
in commit 1007a37e20. Clean it up.
Cc: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20181017082702.5581-12-armbru@redhat.com>
It eases code review, unit is explicit.
Patch generated using:
$ git grep -E '(1024|2048|4096|8192|(<<|>>).?(10|20|30))' hw/ include/hw/
and modified manually.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20180625124238.25339-11-f4bug@amsat.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
qemu-common.h includes qemu/option.h, but most places that include the
former don't actually need the latter. Drop the include, and add it
to the places that actually need it.
While there, drop superfluous includes of both headers, and
separate #include from file comment with a blank line.
This cleanup makes the number of objects depending on qemu/option.h
drop from 4545 (out of 4743) to 284 in my "build everything" tree.
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180201111846.21846-20-armbru@redhat.com>
[Semantic conflict with commit bdd6a90a9e in block/nvme.c resolved]
This cleanup makes the number of objects depending on qapi/error.h
drop from 1910 (out of 4743) to 1612 in my "build everything" tree.
While there, separate #include from file comment with a blank line,
and drop a useless comment on why qemu/osdep.h is included first.
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180201111846.21846-5-armbru@redhat.com>
[Semantic conflict with commit 34e304e975 resolved, OSX breakage fixed]
applied using ./scripts/clean-includes
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
The cloud-init program currently allows fetching of its data by repurposing of
the 'system' type 'serial' field. This is a clear abuse of the serial field that
would clash with other valid usage a virt management app might have for that
field.
Fortunately the SMBIOS defines an "OEM Strings" table whose puporse is to allow
exposing of arbitrary vendor specific strings to the operating system. This is
perfect for use with cloud-init, or as a way to pass arguments to OS installers
such as anaconda.
This patch makes it easier to support this with QEMU. e.g.
$QEMU -smbios type=11,value=Hello,value=World,value=Tricky,,value=test
Which results in the guest seeing dmidecode data
Handle 0x0E00, DMI type 11, 5 bytes
OEM Strings
String 1: Hello
String 2: World
String 3: Tricky,value=test
It is suggested that any app wanting to make use of this OEM strings capability
for accepting data from the host mgmt layer should use its name as a string
prefix. e.g. to expose OEM strings targetting both cloud init and anaconda in
parallel the mgmt app could set
$QEMU -smbios type=11,value=cloud-init:ds=nocloud-net;s=http://10.10.0.1:8000/,\
value=anaconda:method=http://dl.fedoraproject.org/pub/fedora/linux/releases/25/x86_64/os
which would appear as
Handle 0x0E00, DMI type 11, 5 bytes
OEM Strings
String 1: cloud-init:ds=nocloud-net;s=http://10.10.0.1:8000/
String 2: anaconda:method=http://dl.fedoraproject.org/pub/fedora/linux/releases/25/x86_64/os
Use of such string prefixes means the app won't have to care which string slot
its data appears in.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-smbios command line options were accepted but silently ignored on
TARGET_ARM, due to a test for TARGET_I386 in arch_init.c.
Copy the mechanism of hw/pci/pci-stub.c to implement an smbios-stub
instead, enabled for all targets without CONFIG_SMBIOS.
Signed-off-by: Leif Lindholm <leif.lindholm@linaro.org>
Message-Id: <20161222151828.28292-1-leif.lindholm@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Since 9c5ce8db, the uuid is wrongly copied, as QemuUUID 'in' argument is
already a pointer.
Fixes ASAN complaining:
hw/smbios/smbios.c:489:5: runtime error: load of address 0x7fffcdb91b00
with insufficient space for an object of type '__int128 unsigned'
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20160928143810.25558-1-marcandre.lureau@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
[Warp the long error message line in commit message. - Fam]
Signed-off-by: Fam Zheng <famz@redhat.com>
Update all qemu_uuid users as well, especially get rid of the duplicated
low level g_strdup_printf, sscanf and snprintf calls with QEMU UUID API.
Since qemu_uuid_parse is quite tangled with qemu_uuid, its switching to
QemuUUID is done here too to keep everything in sync and avoid code
churn.
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Message-Id: <1474432046-325-10-git-send-email-famz@redhat.com>
A number of different places across the code base use CONFIG_UUID. Some
of them are soft dependency, some are not built if libuuid is not
available, some come with dummy fallback, some throws runtime error.
It is hard to maintain, and hard to reason for users.
Since UUID is a simple standard with only a small number of operations,
it is cleaner to have a central support in libqemuutil. This patch adds
qemu_uuid_* functions that all uuid users in the code base can
rely on. Except for qemu_uuid_generate which is new code, all other
functions are just copy from existing fallbacks from other files.
Note that qemu_uuid_parse is moved without updating the function
signature to use QemuUUID, to keep this patch simple.
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Message-Id: <1474432046-325-2-git-send-email-famz@redhat.com>
Add an IPMI table entry to the SMBIOS.
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This will let things in other files (like IPMI) build SMBIOS tables.
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Commit 57cb38b included qapi/error.h into qemu/osdep.h to get the
Error typedef. Since then, we've moved to include qemu/osdep.h
everywhere. Its file comment explains: "To avoid getting into
possible circular include dependencies, this file should not include
any other QEMU headers, with the exceptions of config-host.h,
compiler.h, os-posix.h and os-win32.h, all of which are doing a
similar job to this file and are under similar constraints."
qapi/error.h doesn't do a similar job, and it doesn't adhere to
similar constraints: it includes qapi-types.h. That's in excess of
100KiB of crap most .c files don't actually need.
Add the typedef to qemu/typedefs.h, and include that instead of
qapi/error.h. Include qapi/error.h in .c files that need it and don't
get it now. Include qapi-types.h in qom/object.h for uint16List.
Update scripts/clean-includes accordingly. Update it further to match
reality: replace config.h by config-target.h, add sysemu/os-posix.h,
sysemu/os-win32.h. Update the list of includes in the qemu/osdep.h
comment quoted above similarly.
This reduces the number of objects depending on qapi/error.h from "all
of them" to less than a third. Unfortunately, the number depending on
qapi-types.h shrinks only a little. More work is needed for that one.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
[Fix compilation without the spice devel packages. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The only remaining users of machine_init() only call
qemu_add_opts(). Rename machine_init() to opts_init() and move it
closer to the qemu_add_opts() calls on vl.c.
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Clean up includes so that osdep.h is included first and headers
which it implies are not included manually.
This commit was created with scripts/clean-includes.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1453832250-766-38-git-send-email-peter.maydell@linaro.org
Done with this Coccinelle semantic patch:
@@
type T;
identifier FUN, RET;
expression list ARGS;
expression ERR, EC;
@@
(
- T RET = FUN(ARGS, &ERR);
+ T RET = FUN(ARGS, &error_fatal);
|
- RET = FUN(ARGS, &ERR);
+ RET = FUN(ARGS, &error_fatal);
|
- FUN(ARGS, &ERR);
+ FUN(ARGS, &error_fatal);
)
- if (ERR != NULL) {
- error_report_err(ERR);
- exit(EC);
- }
This is actually a more elegant version of my initial semantic patch
by courtesy of Eduardo.
It leaves dead Error * variables behind, cleaned up manually.
Cc: qemu-arm@nongnu.org
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
This patch adds support for SMBIOS 3.0 entry point. When caller invokes
smbios_set_defaults(), it can specify entry point as 2.1 or 3.0. Then
smbios_get_tables() will return the entry point table in right format.
Acked-by: Gabriel Somlo <somlo@cmu.edu>
Tested-by: Gabriel Somlo <somlo@cmu.edu>
Tested-by: Leif Lindholm <leif.lindholm@linaro.org>
Signed-off-by: Wei Huang <wei@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Message-id: 1440615870-9518-2-git-send-email-wei@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
To share smbios among different architectures, this patch moves SMBIOS
code (smbios.c and smbios.h) from x86 specific folders into new
hw/smbios directories. As a result, CONFIG_SMBIOS=y is defined in
x86 default config files.
Acked-by: Gabriel Somlo <somlo@cmu.edu>
Tested-by: Gabriel Somlo <somlo@cmu.edu>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Leif Lindholm <leif.lindholm@linaro.org>
Signed-off-by: Wei Huang <wei@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Patrick Venture
Ani Sinha
Eduardo Habkost
Vincent Bernat
Paolo Bonzini
Philippe Mathieu-Daudé
Daniel P. Berrangé
Ying Fang
Marc-André Lureau
Markus Armbruster
Corey Minyard
Like Xu
Peter Maydell
Philippe Mathieu-Daudé
Michael S. Tsirkin
Leif Lindholm
Fam Zheng
Wei Huang