Commit Graph

13 Commits

Author SHA1 Message Date
Vladimir Sementsov-Ogievskiy 9dd003a998 iotests: define group in each iotest
We are going to drop group file. Define group in tests as a preparatory
step.

The patch is generated by

    cd tests/qemu-iotests

    grep '^[0-9]\{3\} ' group | while read line; do
        file=$(awk '{print $1}' <<< "$line");
        groups=$(sed -e 's/^... //' <<< "$line");
        awk "NR==2{print \"# group: $groups\"}1" $file > tmp;
        cat tmp > $file;
    done

Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20210116134424.82867-7-vsementsov@virtuozzo.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
2021-01-20 14:53:22 -06:00
Max Reitz 57284d2ada iotests: Enable fuse for many tests
Many tests (that do not support generic protocols) can run just fine
with FUSE-exported images, so allow them to.  Note that this is no
attempt at being definitely complete.  There are some tests that might
be modified to run on FUSE, but this patch still skips them.  This patch
only tries to pick the rather low-hanging fruits.

Note that 221 and 250 only pass when .lseek is correctly implemented,
which is only possible with a libfuse that is 3.8 or newer.

Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20201027190600.192171-20-mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2020-12-11 17:52:40 +01:00
Eric Blake b66ff2c298 iotests: Specify explicit backing format where sensible
There are many existing qcow2 images that specify a backing file but
no format.  This has been the source of CVEs in the past, but has
become more prominent of a problem now that libvirt has switched to
-blockdev.  With older -drive, at least the probing was always done by
qemu (so the only risk of a changed format between successive boots of
a guest was if qemu was upgraded and probed differently).  But with
newer -blockdev, libvirt must specify a format; if libvirt guesses raw
where the image was formatted, this results in data corruption visible
to the guest; conversely, if libvirt guesses qcow2 where qemu was
using raw, this can result in potential security holes, so modern
libvirt instead refuses to use images without explicit backing format.

The change in libvirt to reject images without explicit backing format
has pointed out that a number of tools have been far too reliant on
probing in the past.  It's time to set a better example in our own
iotests of properly setting this parameter.

iotest calls to create, rebase, and convert are all impacted to some
degree.  It's a bit annoying that we are inconsistent on command line
- while all of those accept -o backing_file=...,backing_fmt=..., the
shortcuts are different: create and rebase have -b and -F, while
convert has -B but no -F.  (amend has no shortcuts, but the previous
patch just deprecated the use of amend to change backing chains).

Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200706203954.341758-9-eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2020-07-14 15:18:59 +02:00
Max Reitz 325dd915b2 iotests: Disable broken streamOptimized tests
streamOptimized does not support writes that do not span exactly one
cluster.  Furthermore, it cannot rewrite already allocated clusters.
As such, many iotests do not work with it.  Disable them.

Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20190815153638.4600-6-mreitz@redhat.com
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
2019-09-03 14:55:35 +02:00
Philippe Mathieu-Daudé 11a82d1429 qemu-iotests: Improve portability by searching bash in the $PATH
Bash is not always installed as /bin/bash. In particular on OpenBSD,
the package installs it in /usr/local/bin.
Use the 'env' shebang to search bash in the $PATH.

Patch created mechanically by running:

  $ git grep -lE '#! ?/bin/bash' -- tests/qemu-iotests \
    | while read f; do \
      sed -i 's|^#!.\?/bin/bash$|#!/usr/bin/env bash|' $f; \
    done

Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2019-03-08 12:26:45 +01:00
Mao Zhongyi bf22957309 qemu-iotests: remove unused variable 'here'
Running
git grep '\$here' tests/qemu-iotests

has 0 hits, which means we are setting a variable that has
no use.  It appears that commit e8f8624d removed the last
use.  So execute the following cmd to remove all of
the 'here=...' lines as dead code.

sed -i '/^here=/d' $(git grep -l '^here=' tests/qemu-iotests)

Cc: kwolf@redhat.com
Cc: mreitz@redhat.com
Cc: eblake@redhat.com
Suggested-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Mao Zhongyi <maozhongyi@cmss.chinamobile.com>
Message-Id: <20181024094051.4470-3-maozhongyi@cmss.chinamobile.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[eblake: touch up commit message, reorder series, rebase to master]
Signed-off-by: Eric Blake <eblake@redhat.com>
2018-11-19 10:08:19 -06:00
Eric Blake 74021bc497 block: Switch bdrv_write_zeroes() to byte interface
Rename to bdrv_pwrite_zeroes() to let the compiler ensure we
cater to the updated semantics.  Do the same for bdrv_co_write_zeroes().

Signed-off-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-06-08 10:21:08 +02:00
Sascha Silbe 339f06a3bc qemu-iotests: tests: do not set unused tmp variable
The previous commit removed the last usage of ${tmp} inside the tests
themselves; the only remaining users are sourced by check. So we can now
drop this variable from the tests.

Signed-off-by: Sascha Silbe <silbe@linux.vnet.ibm.com>
Reviewed-by: Bo Tu <tubo@linux.vnet.ibm.com>
Message-id: 1460472980-26319-4-git-send-email-silbe@linux.vnet.ibm.com
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
2016-04-15 17:56:56 +02:00
Fam Zheng 5581018400 iotests: 034: Use TEST_IMG override instead of "mv"
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 1450752561-9300-7-git-send-email-famz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
2016-01-07 21:30:17 +01:00
Peter Lieven 1f7bf7d068 qemu-iotests: change _supported_proto to file for various tests
all these tests do anything of the following and thus fail with any
protocol other than file:
 - the tests use rm, cp or mv shell commands which only work on file
 - the tests use qcow2.py
 - the images construct new filenames (e.g. backing file names) and
   the logic is broken for anything else than file

Signed-off-by: Peter Lieven <pl@kamp.de>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-02-09 09:12:38 +01:00
Fam Zheng d2329f27c9 qemu-iotests: Add _unsupported_imgopts for vmdk subformats
Some cases are not applicable for vmdk subformats those don't support
certain features, e.g. backing file, and some others can't run on
mult-file image, e.g. monolithicFlat. This adds declaration in test
cases to skip them automatically, so that iotests on vmdk can go
more smoothly (without manually picking of cases for each subformat).

Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-01-22 12:07:16 +01:00
Jeff Cody fef9c19139 qemu-iotests: Quote $TEST_IMG* and $TEST_DIR usage
A lot of image filename and paths are used unquoted.  Quote these to
make sure that directories / filenames with spaces are not problematic.

Signed-off-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2013-09-27 11:10:45 +02:00
Kevin Wolf ab3a32ad5e qemu-iotests: Test backing file COW with zero clusters
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-04-20 15:57:30 +02:00