M profile doesn't have the HVC or SMC encodings, so make them always
UNDEF rather than generating calls to helper functions that assume
A/R profile.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 1487616072-9226-2-git-send-email-peter.maydell@linaro.org
The only functional difference between the GENERATED_HEADERS
and GENERATED_SOURCES variables is that 'Makefile' has a
dependancy on GENERATED_HEADERS, causing generated header files
to be created immediatey at the start of the build process.
There is no reason why this early creation should be restricted
to the .h files, and not include .c files too. Merge both of
the variables into a single GENERATED_FILES variable to make
it clear it is for any type of generated file.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Message-id: 20170228122901.24520-2-berrange@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This dependency is the wrong way, and we will need util/qemu-timer.h from
sysemu/cpus.h in the next patch.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When a KVM_{GET,SET}_MSRS ioctl() fails, it is difficult to find
out which MSR caused the problem. Print an error message for
debugging, before we trigger the (ret == cpu->kvm_msr_buf->nmsrs)
assert.
Suggested-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20170309194634.28457-1-ehabkost@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The power state spec section 5.1.5 AFFINITY_INFO defines the
affinity info return values as
0 ON
1 OFF
2 ON_PENDING
I grepped QEMU for power_state to ensure that no assumptions
of OFF=0 were being made.
Signed-off-by: Andrew Jones <drjones@redhat.com>
Message-id: 20170303123232.4967-1-drjones@redhat.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
In armv8, this register implements more than a single bit, with
fine-grained enables for read access to event counters, cycles
counters, and write access to the software increment. This change
implements those checks using custom access functions for the relevant
registers.
Signed-off-by: Andrew Baumann <Andrew.Baumann@microsoft.com>
Message-id: 20170228215801.10472-2-Andrew.Baumann@microsoft.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
[PMM: move a couple of access functions to be only compiled
ifndef CONFIG_USER_ONLY to avoid compiler warnings]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
A bug was introduced in following commit:
dc0ad84 target/ppc: update overflow flags for add/sub
As for 32-bit ppc target extracting bit 63 for overflow is not correct.
Made it dependent on TARGET_LOG_BITS. This had broken booting MacOS
9.2.1 image
Reported-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Nikunj A Dadhania <nikunj@linux.vnet.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
The SPR UAMR has the number 13, and not 12. (Fortunately it seems like
Linux is not using this register yet - only the privileged version with
number 29 ... that's why nobody noticed this problem yet)
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
So far xtensa provides fixed dummy argc/argv for the corresponding
semihosting calls. Now that there are semihosting_get_argc and
semihosting_get_arg, use them to pass actual command line arguments
to guest.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
glibc blacklists TSX on Haswell CPUs with model==60 and
stepping < 4. To make the Haswell CPU model more useful, make
those guests actually use TSX by changing CPU stepping to 4.
References:
* glibc commit 2702856bf45c82cf8e69f2064f5aa15c0ceb6359
https://sourceware.org/git/?p=glibc.git;a=commit;h=2702856bf45c82cf8e69f2064f5aa15c0ceb6359
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20170309181212.18864-4-ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Some Intel CPUs are known to have a broken TSX implementation. A
microcode update from Intel disabled TSX on those CPUs, but
GET_SUPPORTED_CPUID might be reporting it as supported if the
hosts were not updated yet.
Manually fixup the GET_SUPPORTED_CPUID data to ensure we will
never enable TSX when running on those hosts.
Reference:
* glibc commit 2702856bf45c82cf8e69f2064f5aa15c0ceb6359:
https://sourceware.org/git/?p=glibc.git;a=commit;h=2702856bf45c82cf8e69f2064f5aa15c0ceb6359
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20170309181212.18864-3-ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Helper function for code that needs to check the host CPU
vendor/family/model/stepping values.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20170309181212.18864-2-ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
..just like the rest of the displayed ESR register. Otherwise people
might scratch their heads if a not obviously hex number is displayed
for the EC field.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: KONRAD Frederic <fred.konrad@greensocs.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Paths through the softmmu code during code generation now need to be audited
to check for double locking of tb_lock. In particular, VMEXIT can take tb_lock
through cpu_vmexit -> cpu_x86_update_cr4 -> tlb_flush.
To avoid this, split VMEXIT delivery in two parts, similar to what is done with
exceptions. cpu_vmexit only records the VMEXIT exit code and information, and
cc->do_interrupt can then deliver it when it is safe to take the lock.
Reported-by: Alexander Boettcher <alexander.boettcher@genode-labs.com>
Suggested-by: Richard Henderson <rth@twiddle.net>
Tested-by: Alexander Boettcher <alexander.boettcher@genode-labs.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Hold BQL when accessing timer which can cause interrupts
Signed-off-by: Yongbok Kim <yongbok.kim@imgtec.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Make sure we have the BQL held when processing interrupts.
Reported-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Acked-by: Max Filippov <jcmvbkbc@gmail.com>
Helpers that can trigger IO events (including interrupts) need to be
protected by the BQL. I've updated all the helpers that call into an
ioinst_handle_* functions.
Reported-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
IRQ modification is part of device emulation and should be done while
the BQL is held to prevent races when MTTCG is enabled. This adds
assertions in the hw emulation layer and wraps the calls from helpers
in the BQL.
Reported-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
This suppresses the incorrect warning when forcing MTTCG for x86
guests on x86 hosts. A future patch will still warn when
TARGET_SUPPORT_MTTCG hasn't been defined for the guest (which is still
pending for x86).
Reported-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Acked-by: Eduardo Habkost <ehabkost@redhat.com>
Looks like my previous batch wasn't quite the last before hard freeze.
This has a handful of bugfixes to go in. They're all genuine
bugfixes, though not regressions in some cases.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=/RZL
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/dgibson/tags/ppc-for-2.9-20170306' into staging
ppc patch queue for 2017-03-06
Looks like my previous batch wasn't quite the last before hard freeze.
This has a handful of bugfixes to go in. They're all genuine
bugfixes, though not regressions in some cases.
# gpg: Signature made Mon 06 Mar 2017 04:07:48 GMT
# gpg: using RSA key 0x6C38CACA20D9B392
# gpg: Good signature from "David Gibson <david@gibson.dropbear.id.au>"
# gpg: aka "David Gibson (Red Hat) <dgibson@redhat.com>"
# gpg: aka "David Gibson (ozlabs.org) <dgibson@ozlabs.org>"
# gpg: aka "David Gibson (kernel.org) <dwg@kernel.org>"
# Primary key fingerprint: 75F4 6586 AE61 A66C C44E 87DC 6C38 CACA 20D9 B392
* remotes/dgibson/tags/ppc-for-2.9-20170306:
target/ppc: use helper for excp handling
target/ppc: fmadd: add macro for updating flags
target/ppc: fmadd check for excp independently
spapr: ensure that all threads within core are on the same NUMA node
ppc/xics: register reset handlers for the ICP and ICS objects
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Use the helper routine float[32,64]_maddsub_update_excp() in VSX_MADD
macro.
Signed-off-by: Nikunj A Dadhania <nikunj@linux.vnet.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Adds FPU_MADDSUB_UPDATE macro, this will be used for other routines
having float32/16
Signed-off-by: Nikunj A Dadhania <nikunj@linux.vnet.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Current order of checking does not confirm with the spec
(ISA 3.0: MultiplyAddDP page-469). Change the order and make them
independent of each other.
For example: a = infinity, b = zero, c = SNaN, this should set both
VXIMZ and VXNAN
Signed-off-by: Nikunj A Dadhania <nikunj@linux.vnet.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The split between tests/test-qobject-input-visitor.c and
tests/test-qobject-input-strict.c now makes less sense than ever. The
next commit will take care of that.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <1488544368-30622-20-git-send-email-armbru@redhat.com>
This will probably be my last pull request before the hard freeze. It
has some new work, but that has all been posted in draft before the
soft freeze, so I think it's reasonable to include in qemu-2.9.
This batch has:
* A substantial amount of POWER9 work
* Implements the legacy (hash) MMU for POWER9
* Some more preliminaries for implementing the POWER9 radix
MMU
* POWER9 has_work
* Basic POWER9 compatibility mode handling
* Removal of some premature tests
* Some cleanups and fixes to the existing MMU code to make the
POWER9 work simpler
* A bugfix for TCG multiply adds on power
* Allow pseries guests to access PCIe extended config space
This also includes a code-motion not strictly in ppc code - moving
getrampagesize() from ppc code to exec.c. This will make some future
VFIO improvements easier, Paolo said it was ok to merge via my tree.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=PcNw
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/dgibson/tags/ppc-for-2.9-20170303' into staging
ppc patch queuye for 2017-03-03
This will probably be my last pull request before the hard freeze. It
has some new work, but that has all been posted in draft before the
soft freeze, so I think it's reasonable to include in qemu-2.9.
This batch has:
* A substantial amount of POWER9 work
* Implements the legacy (hash) MMU for POWER9
* Some more preliminaries for implementing the POWER9 radix
MMU
* POWER9 has_work
* Basic POWER9 compatibility mode handling
* Removal of some premature tests
* Some cleanups and fixes to the existing MMU code to make the
POWER9 work simpler
* A bugfix for TCG multiply adds on power
* Allow pseries guests to access PCIe extended config space
This also includes a code-motion not strictly in ppc code - moving
getrampagesize() from ppc code to exec.c. This will make some future
VFIO improvements easier, Paolo said it was ok to merge via my tree.
# gpg: Signature made Fri 03 Mar 2017 03:20:36 GMT
# gpg: using RSA key 0x6C38CACA20D9B392
# gpg: Good signature from "David Gibson <david@gibson.dropbear.id.au>"
# gpg: aka "David Gibson (Red Hat) <dgibson@redhat.com>"
# gpg: aka "David Gibson (ozlabs.org) <dgibson@ozlabs.org>"
# gpg: aka "David Gibson (kernel.org) <dwg@kernel.org>"
# Primary key fingerprint: 75F4 6586 AE61 A66C C44E 87DC 6C38 CACA 20D9 B392
* remotes/dgibson/tags/ppc-for-2.9-20170303:
target/ppc: rewrite f[n]m[add,sub] using float64_muladd
spapr: Small cleanup of PPC MMU enums
spapr_pci: Advertise access to PCIe extended config space
target/ppc: Rework hash mmu page fault code and add defines for clarity
target/ppc: Move no-execute and guarded page checking into new function
target/ppc: Add execute permission checking to access authority check
target/ppc: Add Instruction Authority Mask Register Check
hw/ppc/spapr: Add POWER9 to pseries cpu models
target/ppc/POWER9: Add cpu_has_work function for POWER9
target/ppc/POWER9: Add POWER9 pa-features definition
target/ppc/POWER9: Add POWER9 mmu fault handler
target/ppc: Don't gen an SDR1 on POWER9 and rework register creation
target/ppc: Add patb_entry to sPAPRMachineState
target/ppc/POWER9: Add POWERPC_MMU_V3 bit
powernv: Don't test POWER9 CPU yet
exec, kvm, target-ppc: Move getrampagesize() to common code
target/ppc: Add POWER9/ISAv3.00 to compat_table
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
These cause compilation failures on CentOS 6 or other operating
systems with older GCCs.
Cc: Richard Henderson <rth@twiddle.net>
Cc: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
These cause compilation failures on CentOS 6 or other operating
systems with older GCCs.
Cc: Richard Henderson <rth@twiddle.net>
Cc: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Message-id: 1488558530-21016-1-git-send-email-pbonzini@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Migration from a 2.3.0 qemu results in a reboot on the receiving QEMU
due to a disagreement about SM (System management) interrupts.
2.3.0 didn't have much SMI support, but it did set CPU_INTERRUPT_SMI
and this gets into the migration stream, but on 2.3.0 it
never got delivered.
~2.4.0 SMI interrupt support was added but was broken - so
that when a 2.3.0 stream was received it cleared the CPU_INTERRUPT_SMI
but never actually caused an interrupt.
The SMI delivery was recently fixed by 68c6efe07a, but the
effect now is that an incoming 2.3.0 stream takes the interrupt it
had flagged but it's bios can't actually handle it(I think
partly due to the original interrupt not being taken during boot?).
The consequence is a triple(?) fault and a reboot.
Tested from:
2.3.1 -M 2.3.0
2.7.0 -M 2.3.0
2.8.0 -M 2.3.0
2.8.0 -M 2.8.0
This corresponds to RH bugzilla entry 1420679.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20170223133441.16010-1-dgilbert@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Anton Nefedov <anton.nefedov@virtuozzo.com>
Signed-off-by: Denis V. Lunev <den@openvz.org>
CC: Paolo Bonzini <pbonzini@redhat.com>
CC: Eric Blake <eblake@redhat.com>
Message-Id: <1487614915-18710-3-git-send-email-den@openvz.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Call kvm_on_sigbus_vcpu asynchronously from the VCPU thread.
Information for the SIGBUS can be stored in thread-local variables
and processed later in kvm_cpu_exec.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Build it on kvm_arch_on_sigbus_vcpu instead. They do the same
for "action optional" SIGBUSes, and the main thread should never get
"action required" SIGBUSes because it blocks the signal.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Move the KVM "eat signals" code under CONFIG_LINUX, in preparation
for moving it to kvm-all.c; reraise non-MCE SIGBUS immediately,
without passing it to KVM.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Use the softfloat api for fused multiply-add.
Introduce routine to set the FPSCR flags VXNAN, VXIMZ nad VMISI.
Signed-off-by: Nikunj A Dadhania <nikunj@linux.vnet.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The PPC MMU types are sometimes treated as if they were a bit field
and sometime as if they were an enum which causes maintenance
problems: flipping bits in the MMU type (which is done on both the 1TB
segment and 64K segment bits) currently produces new MMU type
values that are not handled in every "switch" on it, sometimes causing
an abort().
This patch provides some macros that can be used to filter out the
"bit field-like" bits so that the remainder of the value can be
switched on, like an enum. This allows removal of all of the
"degraded" types from the list and should ease maintenance.
Signed-off-by: Sam Bobroff <sam.bobroff@au1.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The hash mmu page fault handling code is responsible for generating ISIs
and DSIs when access permissions cause an access to fail. Part of this
involves setting the srr1 or dsisr registers to indicate what causes the
access to fail. Add defines for the bit fields of these registers and
rework the code to use these new defines in order to improve readability
and code clarity.
While we're here, update what is logged when an access fails to include
information as to what caused to access to fail for debug purposes.
Signed-off-by: Suraj Jitindar Singh <sjitindarsingh@gmail.com>
[dwg: Moved constants to cpu.h since they're not MMUv3 specific]
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
A pte entry has bit fields which can be used to make a page no-execute or
guarded, if either of these bits are set then an instruction access to this
page will fail. Currently these bits are checked with the pp_prot function
however the ISA specifies that the access authority controlled by the
key-pp value pair should only be checked on an instruction access after
the no-execute and guard bits have already been verified to permit the
access.
Move the no-execute and guard bit checking into a new separate function.
Note that we can remove the check for the no-execute bit in the slb entry
since this check was already performed above when we obtained the slb
entry.
In the event that the no-execute or guard bits are set, an ISI should be
generated with the SRR1_NOEXEC_GUARD (0x10000000) bit set in srr1. Add a
define for this for clarity.
Signed-off-by: Suraj Jitindar Singh <sjitindarsingh@gmail.com>
[dwg: Move constants to cpu.h since they're not MMUv3 specific]
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Basic storage protection defines various access authority permissions
based on a slb storage key and pte pp value pair. This access authority
defines read, write and execute permissions however currently we only
use this to control read and write permissions and ignore the execute
control.
Fix the code to allow execute permissions based on the key-pp value pair.
Execute is allowed under the same conditions which enable reads.
(i.e. read permission -> execute permission)
Signed-off-by: Suraj Jitindar Singh <sjitindarsingh@gmail.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The instruction authority mask register (IAMR) can be used to restrict
permissions for instruction fetch accesses on a per key basis for each
of 32 different key values. Access permissions are derived based on the
specific key value stored in the relevant page table entry.
The IAMR was introduced in, and is present in processors since, POWER8
(ISA v2.07). Thus introduce a function to check access permissions based
on the pte key value and the contents of the IAMR when handling a page
fault to ensure sufficient access permissions for an instruction fetch.
A hash pte contains a key value in bits 2:3|52:54 of the second double word
of the pte, this key value gives an index into the IAMR which contains 32
2-bit access masks. If the least significant bit of the 2-bit access mask
corresponding to the given key value is set (IAMR[key] & 0x1 == 0x1) then
the instruction fetch is not permitted and an ISI is generated accordingly.
While we're here, add defines for the srr1 bits to be set for the ISI for
clarity.
e.g.
pte:
dw0 [XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX]
dw1 [XX01XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX010XXXXXXXXX]
^^ ^^^
key = 01010 (0x0a)
IAMR: [XXXXXXXXXXXXXXXXXXXX01XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX]
^^
Access mask = 0b01
Test access mask: 0b01 & 0x1 == 0x1
Least significant bit of the access mask is set, thus the instruction fetch
is not permitted. We should generate an instruction storage interrupt (ISI)
with bit 42 of SRR1 set to indicate access precluded by virtual page class
key protection.
Signed-off-by: Suraj Jitindar Singh <sjitindarsingh@gmail.com>
[dwg: Move new constants to cpu.h, since they're not MMUv3 specific]
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The cpu has work function is used to mask interrupts used to determine
if there is work for the cpu based on the LPCR. Add a function to do this
for POWER9 and add it to the POWER9 cpu definition. This is similar to that
for POWER8 except using the LPCR bits as defined for POWER9.
Signed-off-by: Suraj Jitindar Singh <sjitindarsingh@gmail.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Add a new mmu fault handler for the POWER9 cpu and add it as the handler
for the POWER9 cpu definition.
This handler checks if the guest is radix or hash based on the value in the
partition table entry and calls the correct fault handler accordingly.
The hash fault handling code has also been updated to check if the
partition is using segment tables.
Currently only legacy hash (no segment tables) is supported.
Signed-off-by: Suraj Jitindar Singh <sjitindarsingh@gmail.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
POWER9 doesn't have a storage description register 1 (SDR1) which is used
to store the base and size of the hash table. Thus we don't need to
generate this register on the POWER9 cpu model. While we're here, the
register generation code for 970, POWER5+, POWER<7/8/9> in general is a
mess where we call a generic function from a model specific function which
then attempts to call model specific functions, so rework this for
readability.
We update ppc_cpu_dump_state so that "info registers" will only display
the value of sdr1 if the register has been generated.
As mentioned above the register generation for the pcc->init_proc
function for 970, POWER5+, POWER7, POWER8 and POWER9 has been reworked
for improved clarity. Instead of calling init_proc_book3s_64 which then
attempts to generate the correct registers through a mess of if statements,
we remove this function and instead call the appropriate register
generation functions directly. This follows the register generation model
used for earlier cpu models (pre-970) whereby cpu specific registers are
generated directly in the init_proc function and makes it easier to
add/remove specific registers for new cpu models.
Signed-off-by: Suraj Jitindar Singh <sjitindarsingh@gmail.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
ISA v3.00 adds the idea of a partition table which is used to store the
address translation details for all partitions on the system. The partition
table consists of double word entries indexed by partition id where the second
double word contains the location of the process table in guest memory. The
process table is registered by the guest via a h-call.
We need somewhere to store the address of the process table so we add an entry
to the sPAPRMachineState struct called patb_entry to represent the second
doubleword of a single partition table entry corresponding to the current
guest. We need to store this value so we know if the guest is using radix or
hash translation and the location of the corresponding process table in guest
memory. Since we only have a single guest per qemu instance, we only need one
entry.
Since the partition table is technically a hypervisor resource we require that
access to it is abstracted by the virtual hypervisor through the get_patbe()
call. Currently the value of the entry is never set (and thus
defaults to 0 indicating hash), but it will be required to both implement
POWER9 kvm support and tcg radix support.
We also add this field to be migrated as part of the sPAPRMachineState as we
will need it on the receiving side as the guest will never tell us this
information again and we need it to perform translation.
Signed-off-by: Suraj Jitindar Singh <sjitindarsingh@gmail.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
For easier handling of future processors using the POWER9 or something
close to it, add a new bit in the MMU model. This was originally from a
revised version of 86cf1e9 "target/ppc/POWER9: Add ISAv3.00 MMU definition"
but the older version of the patch was already merged. This makes the
change on top of the original version.
Signed-off-by: Suraj Jitindar Singh <sjitindarsingh@gmail.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
getrampagesize() returns the largest supported page size and mainly
used to know if huge pages are enabled.
However is implemented in target-ppc/kvm.c and not available
in TCG or other architectures.
This renames and moves gethugepagesize() to mmap-alloc.c where
fd-based analog of it is already implemented. This renames and moves
getrampagesize() to exec.c as it seems to be the common place for
helpers like this.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Peter Maydell
Daniel P. Berrange
Paolo Bonzini
Eduardo Habkost
Andrew Jones
Andrew Baumann
Nikunj A Dadhania
Thomas Huth
Max Filippov
Alex Bennée
Yongbok Kim
Markus Armbruster
Dr. David Alan Gilbert
Anton Nefedov
Sam Bobroff
Suraj Jitindar Singh
David Gibson
Alexey Kardashevskiy