The mac99 machines always have a USB controller. Usually not having one around
doesn't hurt quite as much, but Mac OS 9 really really wants one or it crashes
on bootup.
So always add OHCI to make it happy.
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
KVM_PPC_ALLOCATE_HTAB ioctl can return -ENOMEM for KVM guests and QEMU
never handled this correctly. But this didn't cause any problems till
now as KVM_PPC_ALLOCATE_HTAB ioctl returned with smaller than requested
HTAB when enough contiguous memory wasn't available in the host.
After the proposed kernel change: https://patchwork.ozlabs.org/patch/530501/,
KVM_PPC_ALLOCATE_HTAB ioctl will not fallback to lower sized HTAB
allocation and will fail if requested HTAB size can't be met.
Check for such failures in QEMU and abort appropriately. This will
prevent guest kernel from hanging/freezing during early boot by doing
graceful exit when host is unable to allocate requested HTAB.
Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
In postcopy we're going to need to perform the complete phase
for postcopiable devices at a different point, start out by
renaming all of the 'complete's to make the difference obvious.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
HW_COMPAT_2_4 will become non-empty: prepare for it.
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Message-id: 1444991154-79217-3-git-send-email-cornelia.huck@de.ibm.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
These messages are disabled by default; a perfect usecase for tracepoints.
Convert them over.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
LoPAPR defines a "ibm,pa-features" per-CPU device tree property which
describes extended features of the Processor Architecture.
This adds the property to the device tree. At the moment this is the
copy of what pHyp advertises except "I=1 (cache inhibited) Large Pages"
which is enabled for TCG and disabled when running under HV KVM host
with 4K system page size.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
[aik: rebased, changed commit log, moved ci_large_pages initialization,
renamed pa_features arrays]
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The core VFIO infrastructure more or less allows VFIO devices to work
on any normal guest PCI host bridge (PHB) without extra logic.
However, the "spapr-pci-host-bridge" device (as opposed to the special
"spapr-pci-vfio-host-bridge" device) breaks this by using a partially
KVM accelerated implementation of the guest kernel IOMMU which won't
work with VFIO devices, without additional kernel support.
This patch allows VFIO devices to work on the spapr-pci-host-bridge,
by having it switch off KVM TCE acceleration when a VFIO device is
added to the PHB (either on startup, or by hotplug).
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Because of the way non-VFIO guest IOMMU operations are KVM accelerated, not
all TCE tables (guest IOMMU contexts) can support VFIO devices. Currently,
this is decided at creation time.
To support hotplug of VFIO devices, we need to allow a TCE table which
previously didn't allow VFIO devices to be switched so that it can. This
patch adds an spapr_tce_set_need_vfio() function to do this, by
reallocating the table in userspace if necessary.
Currently this doesn't allow the KVM acceleration to be re-enabled if all
the VFIO devices are removed. That's an optimization for another time.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
The vfio_accel parameter used when creating a new TCE table (guest IOMMU
context) has a confusing name. What it really means is whether we need the
TCE table created to be able to support VFIO devices.
VFIO is relevant, because when available we use in-kernel acceleration of
the TCE table, but that may not work with VFIO devices because updates to
the table are handled in kernel, bypass qemu and so don't hit qemu's
infrastructure for keeping the VFIO host IOMMU state in sync with the guest
IOMMU state.
Rename the parameter to "need_vfio" throughout. This is a cosmetic change,
with no impact on the logic.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
At present the PCI host bridge (PHB) for the pseries machine type has a
fixed DMA window from 0..1GB (in PCI address space) which is mapped to real
memory via the PAPR paravirtualized IOMMU.
For better support of VFIO devices, we're going to want to allow for
different configurations of the DMA window.
Eventually we'll want to allow the guest itself to reconfigure the window
via the PAPR dynamic DMA window interface, but as a preliminary this patch
allows the user to reconfigure the window with new properties on the PHB
device.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
According to a commit message in the Linux kernel (see here
https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/commit/?id=b60c31d85a2a
for example), the name of the property that carries the information
about the number of SLB entries should be called "slb-size", and
not "ibm,slb-size". The Linux kernel can deal with both names, but
to be on the safe side we should support the official name, too.
[Now that LoPAPR is public, the relevant requirement can be found in
section C.6.1.8 --dwg]
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Terminate the guest when HTAB of requested size isn't allocated by
the host.
When memory hotplug is attempted on a guest that has booted with
less than requested HTAB size, the guest kernel will not be able
to gracefully fail the hotplug request. This patch will ensure that
we never end up in a situation where memory hotplug fails due to
less than requested HTAB size.
Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Allocate HTAB from ppc_spapr_init() so that we can abort the guest
if requested HTAB size is't allocated by the host. However retain the
htab reset call in spapr_reset_htab() so that HTAB gets reset (and
not allocated) during machine reset.
Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
It works fine with the Linux driver out of the box
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This should help clarify the purpose of the function that returns
the host system's CPU cycle count.
Signed-off-by: Christopher Covington <cov@codeaurora.org>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
ppc portion
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
setting gap to TRUE will make sparse DIMM
address auto allocation, leaving gaps between
a new DIMM address and preceeding existing DIMM.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Rename ELF_MACHINE to be PPC specific. This is used as-is by the
various PPC bootloaders and is locally defined to ELF_MACHINE in linux
user in PPC specific ifdeffery.
This removes another architecture specific definition from the global
namespace (as desired by multi-arch).
Cc: Alexander Graf <agraf@suse.de>
Cc: qemu-ppc@nongnu.org
Reviewed-by: Richard Henderson <rth@twiddle.net>
Acked-By: Riku Voipio <riku.voipio@linaro.org>
Signed-off-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This checks if the PCI device retrieved from the PCI device address
is VFIO PCI device when enabling EEH functionality. If it's not
VFIO PCI device, the EEH functonality isn't enabled.
Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This reverts commit 7cb18007 ("sPAPR: Don't enable EEH on emulated
PCI devices") as rtas_ibm_set_eeh_option() isn't the right place
to check if there has the corresponding PCI device for the input
address, which can be PE address, not PCI device address.
Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The PAPR interface defines a hypercall to pass high-quality
hardware generated random numbers to guests. Recent kernels can
already provide this hypercall to the guest if the right hardware
random number generator is available. But in case the user wants
to use another source like EGD, or QEMU is running with an older
kernel, we should also have this call in QEMU, so that guests that
do not support virtio-rng yet can get good random numbers, too.
This patch now adds a new pseudo-device to QEMU that either
directly provides this hypercall to the guest or is able to
enable the in-kernel hypercall if available. The in-kernel
hypercall can be enabled with the use-kvm property, e.g.:
qemu-system-ppc64 -device spapr-rng,use-kvm=true
For handling the hypercall in QEMU instead, a "RngBackend" is
required since the hypercall should provide "good" random data
instead of pseudo-random (like from a "simple" library function
like rand() or g_random_int()). Since there are multiple RngBackends
available, the user must select an appropriate back-end via the
"rng" property of the device, e.g.:
qemu-system-ppc64 -object rng-random,filename=/dev/hwrng,id=gid0 \
-device spapr-rng,rng=gid0 ...
See http://wiki.qemu-project.org/Features-Done/VirtIORNG for
other example of specifying RngBackends.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The buffer that is allocated in spapr_populate_drconf_memory()
is used for setting both, the "ibm,dynamic-memory" and the
"ibm,associativity-lookup-arrays" property. However, only the
size of the first one is taken into account when allocating the
memory. So if the length of the second property is larger than
the length of the first one, we run into a buffer overflow here!
Fix it by taking the length of the second property into account,
too.
Fixes: "spapr: Support ibm,dynamic-reconfiguration-memory" patch
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
At present, if guest numa nodes are requested, but the cpus in each node
are not specified, spapr just uses the default behaviour or assigning each
vcpu round-robin to nodes.
If smp_threads != 1, that will assign adjacent threads in a core to
different NUMA nodes. As well as being just weird, that's a configuration
that can't be represented in the device tree we give to the guest, which
means the guest and qemu end up with different ideas of the NUMA topology.
This patch implements mc->cpu_index_to_socket_id in the spapr code to
make sure vcpus get assigned to nodes only at the socket granularity.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Till now memory hotplug used RTAS_LOG_V6_HP_ID_DRC_INDEX hotplug type
which meant that we generated one hotplug type of EPOW event for every
256MB (SPAPR_MEMORY_BLOCK_SIZE). This quickly overruns the kernel
rtas log buffer thus resulting in loss of memory hotplug events. Switch
to RTAS_LOG_V6_HP_ID_DRC_COUNT hotplug type for memory so that we
generate only one event per hotplug request.
Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Support hotplug identifier type RTAS_LOG_V6_HP_ID_DRC_COUNT that allows
hotplugging of DRCs by specifying the DRC count.
While we are here, rename
spapr_hotplug_req_add_event() to spapr_hotplug_req_add_by_index()
spapr_hotplug_req_remove_event() to spapr_hotplug_req_remove_by_index()
so that they match with spapr_hotplug_req_add_by_count().
Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Don't represent non-hotluggable memory under drconf node. With this
we don't have to create DRC objects for them.
The effect of this patch is that we revert back to memory@XXXX representation
for all the memory specified with -m option and represent the cold
plugged memory and hot-pluggable memory under
ibm,dynamic-reconfiguration-memory.
Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
When NUMA isn't configured explicitly, assume node 0 is present for
the purpose of creating ibm,associativity-lookup-arrays property
under ibm,dynamic-reconfiguration-memory DT node. This ensures that
the associativity index property is correctly updated in ibm,dynamic-memory
for the LMB that is hotplugged.
Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Currently when user specifies more slots than allowed max of
SPAPR_MAX_RAM_SLOTS (32), we error out like this:
qemu-system-ppc64: unsupported amount of memory slots: 64
Let the user know about the max allowed slots like this:
qemu-system-ppc64: Specified number of memory slots 64 exceeds max supported 32
Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Currently PowerPC kernel doesn't allow hot-adding memory to memory-less
node, but instead will silently add the memory to the first node that has
some memory. This causes two unexpected behaviours for the user.
- Memory gets hotplugged to a different node than what the user specified.
- Since pc-dimm subsystem in QEMU still thinks that memory belongs to
memory-less node, a reboot will set things accordingly and the previously
hotplugged memory now ends in the right node. This appears as if some
memory moved from one node to another.
So until kernel starts supporting memory hotplug to memory-less
nodes, just prevent such attempts upfront in QEMU.
Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Make use of pc-dimm infrastructure to support memory hotplug
for PowerPC.
Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The hash table size is dependent on ram_size, but since with hotplug
the memory can grow till maxram_size. Hence make hash table size dependent
on maxram_size.
This allows to hotplug huge amounts of memory to the guest.
Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Parse ibm,architecture.vec table obtained from the guest and enable
memory node configuration via ibm,dynamic-reconfiguration-memory if guest
supports it. This is in preparation to support memory hotplug for
sPAPR guests.
This changes the way memory node configuration is done. Currently all
memory nodes are built upfront. But after this patch, only memory@0 node
for RMA is built upfront. Guest kernel boots with just that and rest of
the memory nodes (via memory@XXX or ibm,dynamic-reconfiguration-memory)
are built when guest does ibm,client-architecture-support call.
Note: This patch needs a SLOF enhancement which is already part of
SLOF binary in QEMU.
Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Enable memory hotplug for pseries 2.4 and add LMB DR connectors.
With memory hotplug, enforce RAM size, NUMA node memory size and maxmem
to be a multiple of SPAPR_MEMORY_BLOCK_SIZE (256M) since that's the
granularity in which LMBs are represented and hot-added.
LMB DR connectors will be used by the memory hotplug code.
Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
[spapr_drc_reset implementation]
[since this missed the 2.4 cutoff, changing to only enable for 2.5]
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
sPAPR uses hard coded limit of maximum 255 supported CPUs which is
exactly the same as QEMU-wide limit which is MAX_CPUMASK_BITS and also
defined as 255.
This makes use of a global CPU number limit for the "pseries" machine.
In order to anticipate future increase of the MAX_CPUMASK_BITS
(or to help debugging large systems), this also bumps the FDT_MAX_SIZE
limit from 256K to 1M assuming that 1 CPU core needs roughly 512 bytes
in the device tree so the new limit can cover up to 2048 CPU cores.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The dynamic reconfiguration (hotplug) code for the pseries machine type
uses a "DR connector" QOM object for each resource it will be possible
to hotplug. Each of these is added to its owner using
object_property_add_child(owner, "dr-connector[*], ...);
That works ok, mostly, but it means that the property indices are
arbitrary, depending on the order in which the connectors are constructed.
That might line up to something useful, but it doesn't have to.
It will get worse once we add hotplug RAM support. That will add a DR
connector object for every 256MB of potential memory. So if maxmem=2T,
for example, there are 8192 objects under the same parent.
The QOM interfaces aren't really designed for this. In particular
object_property_add() with [*] has O(n^2) time complexity (in the number of
existing children): first it has a linear search through array indices to
find a free slot, each of which is attempted to a recursive call to
object_property_add() with a specific [N]. Those calls are O(n) because
there's a linear search through all properties to check for duplicates.
By using a meaningful index value, which we already know is unique we can
avoid the [*] special behaviour. That lets us reduce the total time for
creating the DR objects from O(n^3) to O(n^2).
O(n^2) is still kind of crappy, but it's enough to reduce the startup time
of qemu (with in-progress memory hotplug support) with maxmem=2T from ~20
minutes to ~4 seconds.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Cc: Bharata B Rao <bharata@linux.vnet.ibm.com>
Tested-by: Bharata B Rao <bharata@linux.vnet.ibm.com>
Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Certain methods in sPAPRDRConnector objects are only ever called by
RTAS and in many cases are responsible for the logic that determines
the RTAS return codes.
Rather than having a level of indirection requiring RTAS code to
re-interpret return values from such methods to determine the
appropriate return code, just pass them through directly.
This requires changing method return types to uint32_t to match the
type of values currently passed to RTAS helpers.
In the case of read accesses like drc->entity_sense() where we weren't
previously reporting any errors, just the read value, we modify the
function to return RTAS return code, and pass the read value back via
reference.
Suggested-by: Bharata B Rao <bharata@linux.vnet.ibm.com>
Suggested-by: David Gibson <david@gibson.dropbear.id.au>
Cc: Bharata B Rao <bharata@linux.vnet.ibm.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Initialize a hotplug memory region under which all the hotplugged
memory is accommodated. Also enable memory hotplug by setting
CONFIG_MEM_HOTPLUG.
Modelled on i386 memory hotplug.
Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Logical resources start with allocation-state:UNUSABLE /
isolation-state:ISOLATED. During hotplug, guests will transition
them to allocation-state:USABLE, and then to
isolation-state:UNISOLATED.
For cases where we cannot transition to allocation-state:USABLE,
in this case due to no device/resource being association with
the logical DRC, we should return an error -3.
For physical DRCs, we default to allocation-state:USABLE and stay
there, so in this case we should report an error -3 when the guest
attempts to make the isolation-state:ISOLATED transition for a DRC
with no device associated.
These are as documented in PAPR 2.7, 13.5.3.4.
We also ensure allocation-state:USABLE when the guest attempts
transition to isolation-state:UNISOLATED to deal with misbehaving
guests attempting to bring online an unallocated logical resource.
This is as documented in PAPR 2.7, 13.7.
Currently we implement no such error logic. Fix this by handling
these error cases as PAPR defines.
Cc: Bharata B Rao <bharata@linux.vnet.ibm.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
PAPR requires ibm,req#msi and ibm,req#msi-x to be present in the
device node to define the number of msi/msi-x interrupts the device
supports, respectively.
Currently we have ibm,req#msi-x hardcoded to a non-sensical constant
that happens to be 2, and are missing ibm,req#msi entirely. The result
of that is that msi-x capable devices get limited to 2 msi-x
interrupts (which can impact performance), and msi-only devices likely
wouldn't work at all. Additionally, if devices expect a minimum that
exceeds 2, the guest driver may fail to load entirely.
SLOF still owns the generation of these properties at boot-time
(although other device properties have since been offloaded to QEMU),
but for hotplugged devices we rely on the values generated by QEMU
and thus hit the limitations above.
Fix this by generating these properties in QEMU as expected by guests.
In the future it may make sense to modify SLOF to pass through these
values directly as we do with other props since we're duplicating SLOF
code.
Cc: qemu-ppc@nongnu.org
Cc: qemu-stable@nongnu.org
Cc: David Gibson <david@gibson.dropbear.id.au>
Cc: Nikunj A Dadhania <nikunj@linux.vnet.ibm.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
For setting debug watchpoints, sPAPR guests use H_SET_MODE hypercall.
The existing QEMU H_SET_MODE handler does not support this but
the KVM handler in HV KVM does. However it is not enabled.
This enables the in-kernel H_SET_MODE handler which handles:
- Completed Instruction Address Breakpoint Register
- Watch point 0 registers.
The rest is still handled in QEMU.
Reported-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The device tree presented to pseries machine type guests includes an
ibm,chip-id property which gives essentially the socket number of each
vcpu core (individual vcpu threads don't get a node in the device
tree).
To calculate this, it uses a vcpus_per_socket variable computed as
(smp_cpus / #sockets). This is correct for the usual case where
smp_cpus == smp_threads * smp_cores * #sockets.
However, you can start QEMU with the number of cores and threads
mismatching the total number of vcpus (whether that _should_ be
permitted is a topic for another day). It's a bit hard to say what
the "real" number of vcpus per socket here is, but for most purposes
(smp_threads * smp_cores) will more meaningfully match how QEMU
behaves with respect to socket boundaries.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
When a device is hotplugged, attach() sets "configured" to
false, waiting an action from the OS to configure it and then
to call ibm,configure-connector. On ibm,configure-connector,
the hypervisor sets "configured" to true.
In case of coldplugged device, attach() sets "configured" to
false, but firmware and OS never call the ibm,configure-connector
in this case, so it remains set to false.
It could be harmless, but when we unplug a device, hypervisor
waits the device becomes configured because for it, a not configured
device is a device being configured, so it waits the end of configuration
to unplug it... and it never happens, so it is never unplugged.
This patch set by default coldplugged device to "configured=true",
hotplugged device to "configured=false".
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This introduces rtas_ldq() to load 64-bits parameter from continuous
two 4-bytes memory chunk of RTAS parameter buffer, to simplify the
code.
Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
If drmgr is used in the guest to hotplug a device before a device_add
has been issued via the QEMU monitor, QEMU segfaults in configure_connector
call. This occurs due to accessing of NULL FDT which otherwise would have
been created and associated with the DRC during device_add command.
Check for NULL FDT and return failure from configure_connector call.
As per PAPR+, an error value of -9003 seems appropriate for this failure.
Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com>
Cc: Michael Roth <mdroth@linux.vnet.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
To see the output of the hcall_dprintf statements, you currently have
to enable the DEBUG_SPAPR_HCALLS macro in include/hw/ppc/spapr.h.
This is ugly because a) not every user who wants to debug guest
problems can or wants to recompile QEMU to be able to see such issues,
and b) since this macro is disabled by default, the code in the
hcall_dprintf() brackets tends to bitrot until somebody temporarily
enables that macro again.
Since the hcall_dprintf statements except one indicate guest
problems, let's always use qemu_log_mask(LOG_GUEST_ERROR, ...) for
this macro instead. One spot indicated an unimplemented host feature,
so this is changed into qemu_log_mask(LOG_UNIMP, ...) instead. Now
it's possible to see all those messages by simply adding the CLI
parameter "-d guest_errors,unimp", without the need to re-compile
the binary.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The DRC_INDEX_ID_MASK macro does a left shift on ~0, which is a signed
quantity, and therefore undefined behaviour according to the C spec. In
particular this causes warnings from the clang sanitizer.
This fixes it by calculating the same mask without using ~0 (I think the
new method is a more common idiom for generating masks anyway). For good
measure I also use 1ULL to force the expression's type to unsigned long
long, which should be good for assigning to anything we're going to want
to.
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
dumpdtb (-machine dumpdtb=<file>) allows one to inspect the generated
device tree of machine types that generate device trees. This is
useful for a) seeing what's there b) debugging/testing device tree
generator patches. It can be used as follows
$QEMU_CMDLINE -machine dumpdtb=dtb
dtc -I dtb -O dts dtb
Signed-off-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Improve the SPLPAR Characteristics information:
Add MaxPlatProcs: set to max_cpus, the maximum CPUs that could be
addded to the system.
Add DesMem: set to the initial memory of the system.
Add DesProcs: set to smp_cpus, the inital number of CPUs in the
system.
These tokens and values are specified by PAPR.
Signed-off-by: Sam Bobroff <sam.bobroff@au1.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Currently, rtas_ibm_change_msi() always returns four values even if
less are specified.
Correct this by only returning the fourth parameter if it was
requested.
This is specified by PAPR.
Signed-off-by: Sam Bobroff <sam.bobroff@au1.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
QEMU is MSI-X capable and makes it available via ibm,change-msi, so
we should indicate this by adding /rtas/ibm,change-msix-capable to the
device tree.
This is specificed by PAPR.
Signed-off-by: Sam Bobroff <sam.bobroff@au1.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
