Move the various open_cpuinfo functions into new files.
Move the m68k open_hardware function as well.
All other guest architectures get a boilerplate empty file.
Tested-by: Helge Deller <deller@gmx.de>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Copy each guest kernel's default value, then bound it
against reserved_va or the host address space.
Tested-by: Helge Deller <deller@gmx.de>
Reviewed-by: Helge Deller <deller@gmx.de>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Provide default values that are as close as possible to the
values used by the guest's kernel.
Tested-by: Helge Deller <deller@gmx.de>
Reviewed-by: Helge Deller <deller@gmx.de>
Reviewed-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This makes target_flat.h behave like every other target_xxx.h header.
It also makes it actually work -- while the current header says adding
a header to the target subdir overrides the common one, it doesn't.
This is for two reasons:
* meson.build adds -Ilinux-user before -Ilinux-user/$arch
* the compiler search path for "target_flat.h" looks in the same dir
as the source file before searching -I paths.
This can be seen with the xtensa port -- the subdir settings aren't
used which breaks stack setup.
Move it to the generic/ subdir and add include stubs like every
other target_xxx.h header is handled.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230129004625.11228-1-vapier@gentoo.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Provide MADV_* definitions using target_mman.h header, similar to what
kernel does. Most architectures use the same values, with the exception
of alpha and hppa.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220906000839.1672934-2-iii@linux.ibm.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
While we had a call to do_m68k_semihosting in linux-user, it
wasn't actually reachable. We don't include DISAS_INSN(halt)
as an instruction unless system mode.
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
According to the M68040 Users Manual, section 8.4.3,
Six word stack frame (format 2), Trace (and others) is
supposed to record the next insn in PC and the address
of the trapping instruction in ADDRESS.
Create gen_raise_exception_format2 to record the trapping
pc in env->mmu.ar. Update m68k_interrupt_all to pass the
value to do_stack_frame. Update cpu_loop to handle EXCP_TRACE.
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220602013401.303699-9-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
According to the M68040 Users Manual, section 8.4.3,
Six word stack frame (format 2), Zero Div (and others)
is supposed to record the next insn in PC and the
address of the trapping instruction in ADDRESS.
While the N, Z and V flags are documented to be undefine on DIV0,
the C flag is documented as always cleared.
Update helper_div* to take the instruction length as an argument
and use raise_exception_format2. Hoist the reset of the C flag
above the division by zero check.
Update m68k_interrupt_all to pass mmu.ar to do_stack_frame.
Update cpu_loop to pass mmu.ar to siginfo.si_addr, as the
kernel does in trap_c().
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220602013401.303699-8-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
According to the M68040 Users Manual, section 8.4.3,
Six word stack frame (format 2), CHK, CHK2 (and others)
are supposed to record the next insn in PC and the
address of the trapping instruction in ADDRESS.
Create a raise_exception_format2 function to centralize recording
of the trapping pc in mmu.ar, plus advancing to the next insn.
Update m68k_interrupt_all to pass mmu.ar to do_stack_frame.
Update cpu_loop to pass mmu.ar to siginfo.si_addr, as the
kernel does in trap_c().
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220602013401.303699-7-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
These are raised by guest instructions, and should not
fall through into the default abort case.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220602013401.303699-5-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Rather than adjust the PC in all of the consumers, raise
the exception with the correct PC in the first place.
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220602013401.303699-2-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Use the new function instead of setting up a target_siginfo_t
and calling queue_signal. Fill in the missing PC for SIGTRAP.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220107213243.212806-12-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Since the prctl constants are supposed to be generic, supply
any that are not provided by the host.
Split out subroutines for PR_GET_FP_MODE, PR_SET_FP_MODE,
PR_GET_VL, PR_SET_VL, PR_RESET_KEYS, PR_SET_TAGGED_ADDR_CTRL,
PR_GET_TAGGED_ADDR_CTRL. Return EINVAL for guests that do
not support these options rather than pass them on to the host.
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20211227150127.2659293-2-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
TARGET_MINSIGSTKSZ has been defined in generic/signal.h
or target_signal.h, We don't need to define it again.
Signed-off-by: Song Gao <gaosong@loongson.cn>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <1637893388-10282-3-git-send-email-gaosong@loongson.cn>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
This value is fully internal to qemu, and so is not a TARGET define.
Reviewed-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This value is fully internal to qemu, and so is not a TARGET define.
We use this as an extra marker for both host and target errno.
Reviewed-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The fallback code in cpu_loop_exit_sigsegv is sufficient
for m68k linux-user.
Remove the code from cpu_loop that handled EXCP_ACCESS.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Create and record the two signal trampolines.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210929130553.121567-13-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
qemu.h is included in various non-linux-user files (which
mostly want the TaskState struct and the functions for
doing usermode access to guest addresses like lock_user(),
unlock_user(), get_user*(), etc).
Split out the parts that are only used in linux-user itself
into a new user-internals.h. This leaves qemu.h with basically
three things:
* the definition of the TaskState struct
* the user-access functions and macros
* do_brk()
all of which are needed by code outside linux-user that
includes qemu.h.
The addition of all the extra #include lines was done with
sed -i '/include.*qemu\.h/a #include "user-internals.h"' $(git grep -l 'include.*qemu\.h' linux-user)
(and then undoing the change to fpa11.h).
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210908154405.15417-8-peter.maydell@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Split the signal related prototypes into the existing header file
signal-common.h, and include it in those places that now require it.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210908154405.15417-4-peter.maydell@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
We want to access the target errno indepently of the rest of the
linux-user code. Move the header containing the generic errno
definitions ('errno_defs.h') to 'generic/target_errno_defs.h',
create a new 'target_errno_defs.h' in each target which itself
includes 'generic/target_errno_defs.h'.
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210708170550.1846343-4-f4bug@amsat.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
In most cases we were already passing get_sp_from_cpustate
directly to the function. In other cases, we were passing
a local variable which already contained the same value.
In the rest of the cases, we were passing the stack pointer
out of env directly.
Reviewed by: Warner Losh <imp@bsdimp.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210426025334.1168495-5-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Note that target_restore_altstack uses the host memory
pointer that we have already verified, so TARGET_EFAULT
is not a possible return value.
Note that using -EFAULT was a bug.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210426025334.1168495-3-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Some platforms used the wrong definition of stack_t where the flags and
size fields were swapped or where the flags field had type ulong instead
of int.
Due to the presence of padding space in the structure and the prevalence
of little-endian machines this problem went unnoticed for a long time.
The type definitions have been cross-checked with the ones defined in
the Linux kernel v5.9, plus some older versions for a few architecture
that have been removed and Xilinx's kernel fork for NiosII [1].
The bsd-user headers remain unchanged as I don't know if they are wrong
or not.
[1] https://github.com/Xilinx/linux-xlnx/blob/master/arch/nios2/include/uapi/asm/signal.h
Signed-off-by: Giuseppe Musacchio <thatlemon@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <e9d47692-ee92-009f-6007-0abc3f502b97@gmail.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
This patch introduces a generic 'termbits.h' file for following
archs: 'aarch64', 'arm', 'i386, 'm68k', 'microblaze', 'nios2',
'openrisc', 'riscv', 's390x', 'x86_64'.
Since all of these archs have the same termios flag values and
same ioctl_tty numbers, there is no need for a separate 'termbits.h'
file for each one of them. For that reason one generic 'termbits.h'
file was added for all of them and an '#include' directive was
added for this generic file in every arch 'termbits.h' file.
Also, some of the flag values that were missing were added in this
generic file so that it matches the generic 'termibts.h' and 'ioctls.h'
files from the kernel: 'asm-generic/termbits.h' and 'asm-generic/ioctls.h'.
Signed-off-by: Filip Bozuta <Filip.Bozuta@syrmia.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20200723210233.349690-2-Filip.Bozuta@syrmia.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
This patch implements strace argument printing functionality for following syscalls:
* mlock, munlock, mlockall, munlockall - lock and unlock memory
int mlock(const void *addr, size_t len)
int munlock(const void *addr, size_t len)
int mlockall(int flags)
int munlockall(void)
man page: https://man7.org/linux/man-pages/man2/mlock.2.html
Implementation notes:
Syscall mlockall() takes an argument that is composed of predefined values
which represent flags that determine the type of locking operation that is
to be performed. For that reason, a printing function "print_mlockall" was
stated in file "strace.list". This printing function uses an already existing
function "print_flags()" to print the "flags" argument. These flags are stated
inside an array "mlockall_flags" that contains values of type "struct flags".
These values are instantiated using an existing macro "FLAG_TARGET()" that
crates aproppriate target flag values based on those defined in files
'/target_syscall.h'. These target flag values were changed from
"TARGET_MLOCKALL_MCL*" to "TARGET_MCL_*" so that they can be aproppriately set
and recognised in "strace.c" with "FLAG_TARGET()". Value for "MCL_ONFAULT"
was added in this patch. This value was also added in "syscall.c" in function
"target_to_host_mlockall_arg()". Because this flag value was added in kernel
version 4.4, it is enwrapped in an #ifdef directive (both in "syscall.c" and
in "strace.c") as to support older kernel versions.
The other syscalls have only primitive argument types, so the
rest of the implementation was handled by stating an appropriate
printing format in file "strace.list". Syscall mlock2() is not implemented in
"syscall.c" and thus it's argument printing is not implemented in this patch.
Signed-off-by: Filip Bozuta <Filip.Bozuta@syrmia.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20200811164553.27713-4-Filip.Bozuta@syrmia.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
The most interesting or most complicated part here is the syscall_nr.h
generators. In order to keep the generation logic all in meson.build,
I am adding to config_target the name of the .tbl file, and making the
generated file syscall<SUFFIX>_nr.h for input file syscall<SUFFIX>.tbl.
For architectures where the input file is not named syscall_nr.tbl,
syscall_nr.h has to be a source file; it's just a forwarder for x86
(i386/x86_64), while for MIPS64 it chooses between N32 and N64 ABIs.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Run scripts/update-syscalltbl.sh with linux commit 0bf999f9c5e7
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Taylor Simpson <tsimpson@quicinc.com>
Message-Id: <20200310103403.3284090-20-laurent@vivier.eu>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
We will need a target-specific hook for adjusting registers
in the parent during clone. Add an empty inline function for
each target, and invoke it from the proper places.
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20191106113318.10226-11-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
We will need a target-specific hook for adjusting registers
in the parent during clone. To avoid confusion, rename the
one we have to make it clear it affects the child.
At the same time, pass in the flags from the clone syscall.
We will need them for correct behaviour for Sparc.
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20191106113318.10226-10-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
This interface has been introduced in 2005 with the
coldfire implementation (e6e5906b6e ColdFire target.)
and looks like to do what the linux-user interface already
does with the TRAP exception rather than the ILLEGAL
exception.
This interface has not been maintained since that.
The semi-hosting interface is not removed so coldfire kernel
with semi-hosting is always supported.
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20190524162049.806-1-laurent@vivier.eu>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
No header includes qemu-common.h after this commit, as prescribed by
qemu-common.h's file comment.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190523143508.25387-5-armbru@redhat.com>
[Rebased with conflicts resolved automatically, except for
include/hw/arm/xlnx-zynqmp.h hw/arm/nrf51_soc.c hw/arm/msf2-soc.c
block/qcow2-refcount.c block/qcow2-cluster.c block/qcow2-cache.c
target/arm/cpu.h target/lm32/cpu.h target/m68k/cpu.h target/mips/cpu.h
target/moxie/cpu.h target/nios2/cpu.h target/openrisc/cpu.h
target/riscv/cpu.h target/tilegx/cpu.h target/tricore/cpu.h
target/unicore32/cpu.h target/xtensa/cpu.h; bsd-user/main.c and
net/tap-bsd.c fixed up]
Cleanup in the boilerplate that each target must define.
The combination CPU(m68k_env_get_cpu) should have used
ENV_GET_CPU to begin; use env_cpu now.
Acked-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Now that we have both ArchCPU and CPUArchState, we can define
this generically instead of via macro in each target's cpu.h.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
It's either "GNU *Library* General Public License version 2" or
"GNU Lesser General Public License version *2.1*", but there was
no "version 2.0" of the "Lesser" license. So assume that version
2.1 is meant here.
Also some files mention the GPL instead of the LGPL after declaring
that the files are licensed under the LGPL, so change these spots to
use LGPL, too.
Reviewed-by: Liam Merwick <liam.merwick@oracle.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1548769438-28942-1-git-send-email-thuth@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
The CPU main-loop routines for linux-user generally
call gdb_handlesig() when they're about to queue a
SIGTRAP signal. This is wrong, because queue_signal()
will cause us to pend a signal, and process_pending_signals()
will then call gdb_handlesig() itself. So the effect is that
we notify gdb of the SIGTRAP, and then if gdb says "OK,
continue with signal X" we will incorrectly notify
gdb of the signal X as well. We don't do this double-notify
for anything else, only SIGTRAP.
Remove this unnecessary and incorrect code from all
the targets except for nios2 (whose main loop is
doing something different and broken, and will be handled
in a separate patch).
This bug only manifests if the user responds to the reported
SIGTRAP using "signal SIGFOO" rather than "continue"; since
the latter is the overwhelmingly common thing to do after a
breakpoint most people won't have hit this.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20181019174958.26616-2-peter.maydell@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Remove some dead code spotted by Coverity (CID 1009855,
1390854, 1390847). The underlying cause in all these cases
is the same: QEMU's put_user operations can't result in
errors, but the kernel's equivalent does. So when code
was copied from the kernel signal-frame-setup/teardown
code, checks on error flags that were needed in the kernel
became dead code for us.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20181019161715.12122-1-peter.maydell@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Coldfire defines an "Unsupported instruction" exception if execution
of a valid instruction is attempted but the required hardware is not
present in the processor.
We use it with instructions that are in fact undefined or illegal,
and the exception expected in this case by the kernel is the
illegal exception, so this patch fixes that.
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20181030165554.5761-1-laurent@vivier.eu>
