Since a too small file cannot be a valid VMDK image, and also since the
buffer's first 4 bytes will be unconditionally examined by
vmdk_open_sparse, let's error out the small file case to be clear.
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Don Koch <dkoch@verizon.com>
Message-id: 1417649314-13704-5-git-send-email-famz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Zeroing a buffer that will be filled right after is not necessary, and
allocating a power of two + 1 is naughty.
Suggested-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Don Koch <dkoch@verizon.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 1417649314-13704-4-git-send-email-famz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
commit 04d542c8b (vmdk: support vmfs files) added support of VMFS extent
type but the comment above the changed code is left out. Update the
comment so they are consistent.
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Don Koch <dkoch@verizon.com>
Message-id: 1417649314-13704-3-git-send-email-famz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This replaces two "time(NULL)" invocations with "g_random_int()".
According to VMDK spec, CID "is a random 32‐bit value updated the first
time the content of the virtual disk is modified after the virtual disk
is opened". Using "seconds since epoch" is just a "lame way" to generate
it, and not completely safe because of the low precision.
Suggested-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Don Koch <dkoch@verizon.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 1417649314-13704-2-git-send-email-famz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
In commit fef6070, the need for NOCOW was removed from the vpc driver,
as we removed the the posix calls. However, the BLOCK_OPT_NOCOW was not
removed from vpc_create_opts. This was a mistake - remove the opt from
there as well.
Signed-off-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Stefan Weil <sw@weilnetz.de>
Message-id: 8ba076fa725fed681cde7d8afc4fb239ae06a9c6.1417620301.git.jcody@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
In commit 7074786, the need for NOCOW was removed from the vdi driver,
as we removed the the posix calls. However, the BLOCK_OPT_NOCOW was not
removed from vdi_create_opts. This was a mistake - remove the opt from
there as well.
Signed-off-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Stefan Weil <sw@weilnetz.de>
Message-id: e189364de11929d8fa04722f5d845de0a9834d44.1417620301.git.jcody@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The return value must be negative on error; there is one place in
raw_open_common() where errp is set, but ret remains 0. Fix it.
Cc: qemu-stable@nongnu.org
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
bdrv_truncate() may fail and qcow2_write_compressed() should return the
error code in that case.
Cc: qemu-stable@nongnu.org
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
qcow2_cache_flush() may fail; if one of the caches failed to be flushed
successfully to disk in qcow2_close() the image should not be marked
clean, and we should emit a warning.
This breaks the (qcow2-specific) iotests 026, 071 and 089; change their
output accordingly.
Cc: qemu-stable@nongnu.org
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
In qcow2_alloc_cluster_offset(), *num is limited to
INT_MAX >> BDRV_SECTOR_BITS by all callers. However, since remaining is
of type uint64_t, we might as well cast *num to that type before
performing the shift.
Cc: qemu-stable@nongnu.org
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The nfs protocol driver is capable of creating images, but did not
specify any creation options. Fix it.
A way to test this issue is the following:
$ qemu-img create -f nfs nfs://127.0.0.1/foo.qcow2 64M
Without this patch, it segfaults. With this patch, it does not. However,
this is not something that should really work; qemu-img should check
whether the parameter for the -f option (and -O for convert) is indeed a
format, and error out if it is not. Therefore, I am not making it an
iotest.
Cc: qemu-stable@nongnu.org
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Although virtually impossible right now, bdrv_find_format("qcow") may
fail. The vvfat block driver should heed that case.
Cc: qemu-stable@nongnu.org
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
We can always assume raw, file and qcow2 being available; so do not use
bdrv_find_format() to locate their BlockDriver objects but statically
reference the respective objects.
Cc: qemu-stable@nongnu.org
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
There are some block drivers which are essential to QEMU and may not be
removed: These are raw, file and qcow2 (as the default non-raw format).
Make their BlockDriver objects public so they can be directly referenced
throughout the block layer without needing to call bdrv_find_format()
and having to deal with an error at runtime, while the real problem
occurred during linking (where raw, file or qcow2 were not linked into
qemu).
Cc: qemu-stable@nongnu.org
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Use the external qemu-timer API instead.
No one else should be calling cpu_get_clock(), get_clock() and
get_clock_realtime() directly; they are internal functions and they
should be confined to qemu-timer.c and cpus.c (where the icount
implementation resides). All accesses should go through
qemu_clock_get_ns.
Cc: kwolf@redhat.com
Cc: stefanha@redhat.com
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1417010463-3527-2-git-send-email-pbonzini@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
After reading the extension header, offset is incremented, but not
checked against end_offset any more. This way an integer overflow could
happen when checking whether the extension end is within the allowed
range, effectively disabling the check.
This patch adds the missing check and a test case for it.
Cc: qemu-stable@nongnu.org
Reported-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 1416935562-7760-2-git-send-email-kwolf@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
If the user neglects to specify the image format, QEMU probes the
image to guess it automatically, for convenience.
Relying on format probing is insecure for raw images (CVE-2008-2004).
If the guest writes a suitable header to the device, the next probe
will recognize a format chosen by the guest. A malicious guest can
abuse this to gain access to host files, e.g. by crafting a QCOW2
header with backing file /etc/shadow.
Commit 1e72d3b (April 2008) provided -drive parameter format to let
users disable probing. Commit f965509 (March 2009) extended QCOW2 to
optionally store the backing file format, to let users disable backing
file probing. QED has had a flag to suppress probing since the
beginning (2010), set whenever a raw backing file is assigned.
All of these additions that allow to avoid format probing have to be
specified explicitly. The default still allows the attack.
In order to fix this, commit 79368c8 (July 2010) put probed raw images
in a restricted mode, in which they wouldn't be able to overwrite the
first few bytes of the image so that they would identify as a different
image. If a write to the first sector would write one of the signatures
of another driver, qemu would instead zero out the first four bytes.
This patch was later reverted in commit 8b33d9e (September 2010) because
it didn't get the handling of unaligned qiov members right.
Today's block layer that is based on coroutines and has qiov utility
functions makes it much easier to get this functionality right, so this
patch implements it.
The other differences of this patch to the old one are that it doesn't
silently write something different than the guest requested by zeroing
out some bytes (it fails the request instead) and that it doesn't
maintain a list of signatures in the raw driver (it calls the usual
probe function instead).
Note that this change doesn't introduce new breakage for false positive
cases where the guest legitimately writes data into the first sector
that matches the signatures of an image format (e.g. for nested virt):
These cases were broken before, only the failure mode changes from
corruption after the next restart (when the wrong format is probed) to
failing the problematic write request.
Also note that like in the original patch, the restrictions only apply
if the image format has been guessed by probing. Explicitly specifying a
format allows guests to write anything they like.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 1416497234-29880-8-git-send-email-kwolf@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Adding something like a "delete notifier" to a BlockBackend would not
make much sense, because whoever is interested in registering there will
probably hold a reference to that BlockBackend; therefore, the notifier
will never be called (or only when the notifiee already relinquished its
reference and thus most probably is no longer interested in that
notification).
Therefore, this patch just passes through the close notifier interface
of the root BDS. This will be called when the device is ejected, for
instance, and therefore does make sense.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1416309679-333-4-git-send-email-mreitz@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Because all BlockDriverStates behind a single BlockBackend reside in a
single AioContext, it is fine to just pass these functions
(blk_add_aio_context_notifier() and blk_remove_aio_context_notifier())
through to the root BlockDriverState.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1416309679-333-3-git-send-email-mreitz@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
There are already some blk_aio_* functions, so we might as well have
blk_co_* functions (as far as we need them). This patch adds
blk_co_flush(), blk_co_discard(), and also blk_invalidate_cache() (which
is not a blk_co_* function but is needed nonetheless).
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1416309679-333-2-git-send-email-mreitz@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Instead of actually recreating the options from scratch, just reuse the
options given for creating the BDS, which are the configuration file
name and additional options. In case there are no additional options we
can thus create a plain filename.
This obviously results in a different output for qemu-iotest 099 which
exactly tests this filename generation. Fix it up as well.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 1415697825-26678-2-git-send-email-mreitz@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This bool option will allow query all the node names. It iterates all
the BDSes that are assigned a name, also in this case don't query up the
backing chain.
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Node name is a better identifier of BDS.
We will want to query statistics of a BDS node buried in the BDS graph,
so reporting the node's name if there is one will do the trick.
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This reverts commit 000c4dfff4.
The main reason for reverting this commit before the 2.2 release is that
it adds a QAPI interface that we don't want to keep: The 'nocow' flag
doesn't generally make sense for block nodes, but only for the raw-posix
driver. It should therefore be part of ImageInfoSpecific rather than
ImageInfo.
The commit contains more problems, but unlike the API stability issue
they wouldn't justify reverting it.
Conflicts:
block/qapi.c
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
fsync() may fail, and that case should be handled.
Reported-by: László Érsek <lersek@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The loop which filled the file with zeroes may have been left early due
to an error. In that case, the fsync() should be skipped.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
write() may write less bytes than requested; in this case, the number of
bytes written is returned. This is the byte count we should be
subtracting from the number of bytes still to be written, and not the
byte count we requested to write.
Reported-by: László Érsek <lersek@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
On systems where SEEK_HOLE in a trailing hole seeks to EOF (Solaris,
but not Linux), try_seek_hole() reports trailing data instead.
Additionally, unlikely lseek() failures are treated badly:
* When SEEK_HOLE fails, try_seek_hole() reports trailing data. For
-ENXIO, there's in fact a trailing hole. Can happen only when
something truncated the file since we opened it.
* When SEEK_HOLE succeeds, SEEK_DATA fails, and SEEK_END succeeds,
then try_seek_hole() reports a trailing hole. This is okay only
when SEEK_DATA failed with -ENXIO (which means the non-trailing hole
found by SEEK_HOLE has since become trailing somehow). For other
failures (unlikely), it's wrong.
* When SEEK_HOLE succeeds, SEEK_DATA fails, SEEK_END fails (unlikely),
then try_seek_hole() reports bogus data [-1,start), which its caller
raw_co_get_block_status() turns into zero sectors of data. Could
theoretically lead to infinite loops in code that attempts to scan
data vs. hole forward.
Rewrite from scratch, with very careful comments.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Commit 5500316 (May 2012) implemented raw_co_is_allocated() as
follows:
1. If defined(CONFIG_FIEMAP), use the FS_IOC_FIEMAP ioctl
2. Else if defined(SEEK_HOLE) && defined(SEEK_DATA), use lseek()
3. Else pretend there are no holes
Later on, raw_co_is_allocated() was generalized to
raw_co_get_block_status().
Commit 4f11aa8 (May 2014) changed it to try the three methods in order
until success, because "there may be implementations which support
[SEEK_HOLE/SEEK_DATA] but not [FIEMAP] (e.g., NFSv4.2) as well as vice
versa."
Unfortunately, we used FIEMAP incorrectly: we lacked FIEMAP_FLAG_SYNC.
Commit 38c4d0a (Sep 2014) added it. Because that's a significant
speed hit, the next commit 7c159037 put SEEK_HOLE/SEEK_DATA first.
As you see, the obvious use of FIEMAP is wrong, and the correct use is
slow. I guess this puts it somewhere between -7 "The obvious use is
wrong" and -10 "It's impossible to get right" on Rusty Russel's Hard
to Misuse scale[*].
"Fortunately", the FIEMAP code is used only when
* SEEK_HOLE/SEEK_DATA aren't defined, but CONFIG_FIEMAP is
Uncommon. SEEK_HOLE had no XFS implementation between 2011 (when it
was introduced for ext4 and btrfs) and 2012.
* SEEK_HOLE/SEEK_DATA and CONFIG_FIEMAP are defined, but lseek() fails
Unlikely.
Thus, the FIEMAP code executes rarely. Makes it a nice hidey-hole for
bugs. Worse, bugs hiding there can theoretically bite even on a host
that has SEEK_HOLE/SEEK_DATA.
I don't want to worry about this crap, not even theoretically. Get
rid of it.
[*] http://ozlabs.org/~rusty/index.cgi/tech/2008-04-01.html
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Missed in commit 705be72.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
When extent types don't match, we return -ENOTSUP. In this case, be
polite to the caller and don't modify bdi.
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 1415938161-16217-1-git-send-email-famz@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The block layer read and write functions do not like requests which are
bigger than INT_MAX bytes. Since the VDI bmap is read and written in a
single operation, its size is therefore limited accordingly. This
reduces the maximum VDI image size supported by QEMU to half of what it
currently is (down to approximately 512 TB).
The VDI test 084 has to be adapted accordingly. Actually, one could
clearly see that it was broken from the "Could not open
'TEST_DIR/t.IMGFMT': Invalid argument" line for an image which was
supposed to work just fine.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Peter Lieven <pl@kamp.de>
Version: GnuPG v1
iQEcBAABAgAGBQJUV2wdAAoJEJykq7OBq3PIjcAH/29rl938ETw1wjXxYe3uH+R6
K2yFEiPh9/cOJSH0mJ+gD8DZIN+iyR4eoQGP2s5ALFPcX3bkYxRLlUeYK0BCp883
esc7gO6XPhLvTVqP0xgACRCdUwH2I0VTToDlHjXXZogyI/DuDX3gzWJufE3x1DGs
WNTMOp5n/uYkWH3rI3DkInmbSddEz3pgX65a8BuYtw0V/RSeSRnHKDYHMygvJBRL
EVfWRNeOIrZ730CyJry0t8ITjsZxiBDKXR5glNSwaIfQUfGkTSWi9YNSurNYkUDr
aMS2rgvOVlrOUDKTHUj9oS3jgoGWcDtlk9E1MeSoyIptbRoMhdFVl1AUJZsrMJU=
=Mfbu
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/stefanha/tags/block-pull-request' into staging
# gpg: Signature made Mon 03 Nov 2014 11:50:53 GMT using RSA key ID 81AB73C8
# gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>"
# gpg: aka "Stefan Hajnoczi <stefanha@gmail.com>"
* remotes/stefanha/tags/block-pull-request: (53 commits)
block: declare blockjobs and dataplane friends!
block: let commit blockjob run in BDS AioContext
block: let mirror blockjob run in BDS AioContext
block: let stream blockjob run in BDS AioContext
block: let backup blockjob run in BDS AioContext
block: add bdrv_drain()
blockjob: add block_job_defer_to_main_loop()
blockdev: add note that block_job_cb() must be thread-safe
blockdev: acquire AioContext in blockdev_mark_auto_del()
blockdev: acquire AioContext in do_qmp_query_block_jobs_one()
block: acquire AioContext in generic blockjob QMP commands
iotests: Expand test 061
block/qcow2: Simplify shared L2 handling in amend
block/qcow2: Make get_refcount() global
block/qcow2: Implement status CB for amend
qemu-img: Fix insignificant memleak
qemu-img: Add progress output for amend
block: Add status callback to bdrv_amend_options()
block: qemu-iotest 107 supports NFS
iotests: Add test for qcow2's bdrv_make_empty
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.12 (GNU/Linux)
iQEcBAABAgAGBQJUVhuDAAoJEL7lnXSkw9fbOKMIAIE3XZMhar4Vmokb/K0DFbnh
gy2z7iCe7vumLKiRSJX1LGmkFO3dwykw82JZQ1SVo0RdgguJ5dx1Abx1qDM1rojL
jJT0pJ9zWPl4fTv38wCEfaysQHPdgwoH4826ga+MXnVS9XHRHHxuQ4vI01AK3oyQ
4t6/wto9H8kF3n6ny7tz5WNZClsq7qbiIqw5nNCILQfSh/VBPwxQNBiWf/nYVMuY
Ubk5noztZwH+hbiAQL5lAPz/HolcRwg1tzbR0dfmt8/aqO28rJhasG58JgtziI2y
JSg4BwldqUQEgiHonArLfQDixjLtEEyL+fQSzZm02ixwcBpc/ADSyGDy2R1zpH8=
=j1ga
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/mjt/tags/pull-trivial-patches-2014-11-02' into staging
trivial patches for 2014-11-02
# gpg: Signature made Sun 02 Nov 2014 11:54:43 GMT using RSA key ID A4C3D7DB
# gpg: Good signature from "Michael Tokarev <mjt@tls.msk.ru>"
# gpg: aka "Michael Tokarev <mjt@corpit.ru>"
# gpg: aka "Michael Tokarev <mjt@debian.org>"
* remotes/mjt/tags/pull-trivial-patches-2014-11-02: (23 commits)
vdi: wrapped uuid_unparse() in #ifdef
tap: fix possible fd leak in net_init_tap
tap: do not close(fd) in net_init_tap_one
target-i386: Remove unused model_features_t struct
tap_int.h: remove repeating NETWORK_SCRIPT defines
os-posix: reorder parent notification for -daemonize
pidfile: stop making pidfile error a special case
os-posix: replace goto again with a proper loop
os-posix: use global daemon_pipe instead of cryptic fds[1]
dump: Fix dump-guest-memory termination and use-after-close
virtio-9p-proxy: improve error messages in connect_namedsocket()
virtio-9p-proxy: fix error return in proxy_init()
virtio-9p-proxy: Fix sockfd leak
target-tricore: check return value before using it
net/slirp: specify logbase for smbd
Revert "os-posix: report error message when lock file failed"
util: Improve os_mem_prealloc error message
sparse: fix build
target-arm: A64: remove redundant store
target-xtensa: mark XtensaConfig structs as unused
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The commit block job must run in the BlockDriverState AioContext so that
it works with dataplane.
Acquire the AioContext in blockdev.c so starting the block job is safe.
One detail here is that the bdrv_drain_all() must be moved inside the
aio_context_acquire() region so requests cannot sneak in between the
drain and acquire.
The completion code in block/commit.c must perform backing chain
manipulation and bdrv_reopen() from the main loop. Use
block_job_defer_to_main_loop() to achieve that.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 1413889440-32577-11-git-send-email-stefanha@redhat.com
The mirror block job must run in the BlockDriverState AioContext so that
it works with dataplane.
Acquire the AioContext in blockdev.c so starting the block job is safe.
Note that to_replace is treated separately from other BlockDriverStates
in that it does not need to be in the same AioContext. Explicitly
acquire/release to_replace's AioContext when accessing it.
The completion code in block/mirror.c must perform BDS graph
manipulation and bdrv_reopen() from the main loop. Use
block_job_defer_to_main_loop() to achieve that.
The bdrv_drain_all() call is not allowed outside the main loop since it
could lead to lock ordering problems. Use bdrv_drain(bs) instead
because we have acquired the AioContext so nothing else can sneak in
I/O.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 1413889440-32577-10-git-send-email-stefanha@redhat.com
The stream block job must run in the BlockDriverState AioContext so that
it works with dataplane.
The basics of acquiring the AioContext are easy in blockdev.c.
The tricky part is the completion code which drops part of the backing
file chain. This must be done in the main loop where bdrv_unref() and
bdrv_close() are safe to call. Use block_job_defer_to_main_loop() to
achieve that.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 1413889440-32577-9-git-send-email-stefanha@redhat.com
The backup block job must run in the BlockDriverState AioContext so that
it works with dataplane.
The basics of acquiring the AioContext are easy in blockdev.c.
The completion code in block/backup.c must call bdrv_unref() from the
main loop. Use block_job_defer_to_main_loop() to achieve that.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 1413889440-32577-8-git-send-email-stefanha@redhat.com
Currently, we have a bitmap for keeping track of which clusters have
been created during the zero cluster expansion process. This was
necessary because we need to properly increase the refcount for shared
L2 tables.
However, now we can simply take the L2 refcount and use it for the
cluster allocated for expansion. This will be the correct refcount and
therefore we don't have to remember that cluster having been allocated
any more.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Benoît Canet <benoit.canet@nodalink.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
Message-id: 1414404776-4919-7-git-send-email-mreitz@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reading the refcount of a cluster is an operation which can be useful in
all of the qcow2 code, so make that function globally available.
While touching this function, amend the comment describing the "addend"
parameter: It is (no longer, if it ever was) necessary to have it set to
-1 or 1; any value is fine.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Benoît Canet <benoit.canet@nodalink.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
Message-id: 1414404776-4919-6-git-send-email-mreitz@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The only really time-consuming operation potentially performed by
qcow2_amend_options() is zero cluster expansion when downgrading qcow2
images from compat=1.1 to compat=0.10, so report status of that
operation and that operation only through the status CB.
For this, approximate the progress as the number of L1 entries visited
during the operation.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Benoît Canet <benoit.canet@nodalink.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
Message-id: 1414404776-4919-5-git-send-email-mreitz@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Depending on the changed options and the image format,
bdrv_amend_options() may take a significant amount of time. In these
cases, a way to be informed about the operation's status is desirable.
Since the operation is rather complex and may fundamentally change the
image, implementing it as AIO or a coroutine does not seem feasible. On
the other hand, implementing it as a block job would be significantly
more difficult than a simple callback and would not add benefits other
than progress report to the amending operation, because it should not
actually be run as a block job at all.
A callback may not be very pretty, but it's very easy to implement and
perfectly fits its purpose here.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Benoît Canet <benoit.canet@nodalink.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-id: 1414404776-4919-2-git-send-email-mreitz@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
qemu-img should use QMP commands whenever possible in order to ensure
feature completeness of both online and offline image operations. As
qemu-img itself has no access to QMP (since this would basically require
just everything being linked into qemu-img), imitate QMP's
implementation of block-commit by using commit_active_start() and then
waiting for the block job to finish.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 1414159063-25977-9-git-send-email-mreitz@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Instead of taking the total length of the block device as the block
job's length, use the number of dirty sectors. The progress is now the
number of sectors mirrored to the target block device. Note that this
may result in the job's length increasing during operation, which is
however in fact desirable.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-id: 1414159063-25977-8-git-send-email-mreitz@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
bdrv_make_empty() is currently only called if the current image
represents an external snapshot that has been committed to its base
image; it is therefore unlikely to have internal snapshots. In this
case, bdrv_make_empty() can be greatly sped up by emptying the L1 and
refcount table (while having the dirty flag set, which only works for
compat=1.1) and creating a trivial refcount structure.
If there are snapshots or for compat=0.10, fall back to the simple
implementation (discard all clusters).
[Applied s/clusters/cluster/ typo fix suggested by Eric Blake
--Stefan]
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 1414159063-25977-4-git-send-email-mreitz@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Implement this function by making all clusters in the image file fall
through to the backing file (by using the recently extended discard).
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-id: 1414159063-25977-3-git-send-email-mreitz@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Normally, discarded sectors should read back as zero. However, there are
cases in which a sector (or rather cluster) should be discarded as if
they were never written in the first place, that is, reading them should
fall through to the backing file again.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-id: 1414159063-25977-2-git-send-email-mreitz@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Instead of generating the full return value thrice in try_fiemap(),
try_seek_hole() and as a fall-back in raw_co_get_block_status() itself,
generate the value only in raw_co_get_block_status().
While at it, also remove the pnum parameter from try_fiemap() and
try_seek_hole().
Suggested-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-id: 1414148280-17949-3-git-send-email-mreitz@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
As its comment states, raw_co_get_block_status() should unconditionally
return 0 and set *pnum to 0 for after EOF.
An assertion after lseek(..., SEEK_HOLE) tried to catch this case by
asserting that errno != -ENXIO (which would indicate a position after
the EOF); but it should be errno != ENXIO instead. Regardless of that,
there should be no such assertion at all. If bdrv_getlength() returned
an outdated value and the image has been resized outside of qemu,
lseek() will return with errno == ENXIO. Just return that value as an
error then.
Setting *pnum to 0 and returning 0 should not be done here, as in that
case we should update the device length as well. So, from qemu's
perspective, the file has not been resized; it's just that there was an
error querying sectors beyond a certain point (the actual file size).
Additionally, nb_sectors should be clamped against the image end. This
was probably not an issue if FIEMAP or SEEK_HOLE/SEEK_DATA worked, but
the fallback did not take this case into account.
Reported-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-id: 1414148280-17949-2-git-send-email-mreitz@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
