"Debugging with GDB / Appendix E GDB Remote Serial Protocol /
Overview" specifies "The printable characters '#' and '$' or with a
numeric value greater than 126 must not be used." gdb_read_byte()
only rejects values < 32. This is wrong. Impact depends on the caller:
* gdb_handlesig() passes a char. Incorrectly accepts '#', '$' and
'\127'.
* gdb_chr_receive() passes an uint8_t. Additionally accepts
characters with the most-significant bit set.
Correct the validity check to match the specification.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190514180311.16028-4-armbru@redhat.com>
The vCont packet accepts a series of actions, each being applied on a
given thread ID. Giving no thread ID for an action is valid and means
"all threads".
This commit fixes vCont packets being incorrectly rejected when no
thread ID was given for an action.
In multiprocess mode, the GDB Remote Protocol specification is unclear
on what "all threads" means. We choose to apply the action on all
threads of all attached processes.
This commit is based on the initial fix by Lucien Murray-Pitts.
Fixes: e40e5204af
Reported-by: Lucien Murray-Pitts <lucienmp_antispam@yahoo.com>
Reported-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Luc Michel <luc.michel@greensocs.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20190325110452.6756-1-luc.michel@greensocs.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Per the GDB remote protocol documentation
https://sourceware.org/gdb/current/onlinedocs/gdb/Packets.html#index-vKill-packet
the debug stub is expected to send a reply to the 'vKill' packet. At
least some versions of GDB crash if the gdb stub simply exits without
sending a reply. This patch fixes QEMU's gdb stub to conform to the
expected behavior.
Note that QEMU's existing handling of the legacy 'k' packet is
correct: in that case GDB does not expect a reply, and QEMU does not
send one.
Signed-off-by: Sandra Loosemore <sandra@codesourcery.com>
Message-id: 1550008033-26540-1-git-send-email-sandra@codesourcery.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This will be needed by vhost-user-test, when each test switches to
its own GMainLoop and GMainContext. Otherwise, for a reconnecting
socket the initial connection will happen on the default GMainContext,
and no one will be listening on it.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20190202110834.24880-1-pbonzini@redhat.com>
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
With multiprocess extensions gdb uses 'vKill' packet instead of 'k' to
kill the inferior. Handle 'vKill' the same way 'k' was handled in the
presence of single process.
Fixes: 7cf48f6752 ("gdbstub: add multiprocess support to
(f|s)ThreadInfo and ThreadExtraInfo")
Cc: Luc Michel <luc.michel@greensocs.com>
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Reviewed-by: Luc Michel <luc.michel@greensocs.com>
Reviewed-by: KONRAD Frederic <frederic.konrad@adacore.com>
Tested-by: KONRAD Frederic <frederic.konrad@adacore.com>
Message-id: 20190130192403.13754-1-jcmvbkbc@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Now we're keeping the cluster index in the CPUState, we don't
need to jump through hoops in gdb_get_cpu_pid() to find the
associated cluster object.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Luc Michel <luc.michel@greensocs.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 20190121152218.9592-5-peter.maydell@linaro.org
a TID or PID value means "any thread" (resp. "any process"). This commit
fixes the different combinations when at least one value is 0.
When both are 0, the function now returns the first attached CPU,
instead of the CPU with TID 1, which is not necessarily attached or even
existent.
When PID is specified but TID is 0, the function returns the first CPU
in the process, or NULL if the process does not exist or is not
attached.
In other cases, it returns the corresponding CPU, while ignoring the PID
check when PID is 0.
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Luc Michel <luc.michel@greensocs.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20190119140000.11767-1-luc.michel@greensocs.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add multiprocess extension support by enabling multiprocess mode when
the peer requests it, and by replying that we actually support it in the
qSupported reply packet.
Signed-off-by: Luc Michel <luc.michel@greensocs.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 20181207090135.7651-16-luc.michel@greensocs.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
When gdb_set_stop_cpu() is called with a CPU associated to a process
currently not attached by the GDB client, return without modifying the
stop CPU. Otherwise, GDB gets confused if it receives packets with a
thread-id it does not know about.
Signed-off-by: Luc Michel <luc.michel@greensocs.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 20181207090135.7651-15-luc.michel@greensocs.com
[PMM: fix checkpatch comment style nit]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
When a new connection is established, we set the first process to be
attached, and the others detached. The first CPU of the first process
is selected as the current CPU.
Signed-off-by: Luc Michel <luc.michel@greensocs.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20181207090135.7651-14-luc.michel@greensocs.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add support for the vAttach packets. In multiprocess mode, GDB sends
them to attach to additional processes.
Signed-off-by: Luc Michel <luc.michel@greensocs.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20181207090135.7651-13-luc.michel@greensocs.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add support for the '!' extended mode packet. This is required for the
multiprocess extension.
Signed-off-by: Luc Michel <luc.michel@greensocs.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20181207090135.7651-12-luc.michel@greensocs.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
'D' packets are used by GDB to detach from a process. In multiprocess
mode, the PID to detach from is sent in the request.
Signed-off-by: Luc Michel <luc.michel@greensocs.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20181207090135.7651-11-luc.michel@greensocs.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add support for multiprocess extension in gdb_vm_state_change()
function.
Signed-off-by: Luc Michel <luc.michel@greensocs.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20181207090135.7651-10-luc.michel@greensocs.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Change the Xfer:features:read: packet handling to support the
multiprocess extension. This packet is used to request the XML
description of the CPU. In multiprocess mode, different descriptions can
be sent for different processes.
This function now takes the process to send the description for as a
parameter, and use a buffer in the process structure to store the
generated description.
It takes the first CPU of the process to generate the description.
Signed-off-by: Luc Michel <luc.michel@greensocs.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20181207090135.7651-9-luc.michel@greensocs.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Change the thread info related packets handling to support multiprocess
extension.
Add the CPUs class name in the extra info to help differentiate
them in multiprocess mode.
Signed-off-by: Luc Michel <luc.michel@greensocs.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20181207090135.7651-8-luc.michel@greensocs.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Change the sC packet handling to support the multiprocess extension.
Instead of returning the first thread, we return the first thread of the
current process.
Signed-off-by: Luc Michel <luc.michel@greensocs.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 20181207090135.7651-7-luc.michel@greensocs.com
[PMM: corrected checkpatch comment style nit]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add the gdb_first_attached_cpu() and gdb_next_attached_cpu() to iterate
over all the CPUs in currently attached processes.
Add the gdb_first_cpu_in_process() and gdb_next_cpu_in_process() to
iterate over CPUs of a given process.
Use them to add multiprocess extension support to vCont packets.
Signed-off-by: Luc Michel <luc.michel@greensocs.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20181207090135.7651-6-luc.michel@greensocs.com
[PMM: corrected checkpatch comment style nit]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add a couple of helper functions to cope with GDB threads and processes.
The gdb_get_process() function looks for a process given a pid.
The gdb_get_cpu() function returns the CPU corresponding to the (pid,
tid) pair given as parameters.
The read_thread_id() function parses the thread-id sent by the peer.
This function supports the multiprocess extension thread-id syntax. The
return value specifies if the parsing failed, or if a special case was
encountered (all processes or all threads).
Use them in 'H' and 'T' packets handling to support the multiprocess
extension.
Signed-off-by: Luc Michel <luc.michel@greensocs.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20181207090135.7651-5-luc.michel@greensocs.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The gdb_get_cpu_pid() function does the PID lookup for the given CPU. It
checks if the CPU is a direct child of a CPU cluster. If it is, the
returned PID is the cluster ID plus one (cluster IDs start at 0, GDB
PIDs at 1). When the CPU is not a child of such a container, the PID of
the default process is returned.
The gdb_fmt_thread_id() function generates the string to be used to identify
a given thread, in a response packet for the peer. This function
supports generating thread IDs when multiprocess mode is enabled (in the
form `p<pid>.<tid>').
Use them in the reply to a '?' request.
Signed-off-by: Luc Michel <luc.michel@greensocs.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 20181207090135.7651-4-luc.michel@greensocs.com
[PMM: fixed checkpatch blockquote style nit]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add a structure GDBProcess that represents processes from the GDB
semantic point of view.
CPUs can be split into different processes, by grouping them under
different cpu-cluster objects. Each occurrence of a cpu-cluster object
implies the existence of the corresponding process in the GDB stub. The
GDB process ID is derived from the corresponding cluster ID as follows:
GDB PID = cluster ID + 1
This is because PIDs -1 and 0 are reserved in GDB and cannot be used by
processes.
A default process is created to handle CPUs that are not in a cluster.
This process gets the PID of the last process PID + 1.
Signed-off-by: Luc Michel <luc.michel@greensocs.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20181207090135.7651-3-luc.michel@greensocs.com
[PMM: fixed checkpatch nit about block comment style]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This is mostly for readability of the code. Let's make it clear which
callers can create an implicit monitor when the chardev is muxed.
This will also enforce a safer behaviour, as we don't really support
creating monitor anywhere/anytime at the moment. Add an assert() to
make sure the programmer explicitely wanted that behaviour.
There are documented cases, such as: -serial/-parallel/-virtioconsole
and to less extent -debugcon.
Less obvious and questionable ones are -gdb, SLIRP -guestfwd and Xen
console. Add a FIXME note for those, but keep the support for now.
Other qemu_chr_new() callers either have a fixed parameter/filename
string or do not need it, such as -qtest:
* qtest.c: qtest_init()
Afaik, only used by tests/libqtest.c, without mux. I don't think we
support it outside of qemu testing: drop support for implicit mux
monitor (qemu_chr_new() call: no implicit mux now).
* hw/
All with literal @filename argument that doesn't enable mux monitor.
* tests/
All with @filename argument that doesn't enable mux monitor.
On a related note, the list of monitor creation places:
- the chardev creators listed above: all from command line (except
perhaps Xen console?)
- -gdb & hmp gdbserver will create a "GDB monitor command" chardev
that is wired to an HMP monitor.
- -mon command line option
From this short study, I would like to think that a monitor may only
be created in the main thread today, though I remain skeptical :)
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Since 2f652224f7, we now check if socket_set_nodelay() errored,
but forgot to close the socket before reporting an error.
Fixes: Coverity CID 1391290 (RESOURCE_LEAK)
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20180524223458.5651-1-f4bug@amsat.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
gdb_handlesig()'s behaviour is not entirely obvious at first
glance. Add a doc comment for it, and also add a comment
explaining why it's ok for gdb_do_syscallv() to ignore
gdb_handlesig()'s return value. (Coverity complains about
this: CID 1390850.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20180515181958.25837-1-peter.maydell@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
In gdb_accept(), we both fail to check all errors (notably
that from socket_set_nodelay(), as Coverity notes in CID 1005666),
and fail to return an error status back to our caller. Correct
both of these things, so that errors in accept() result in our
stopping with a useful error message rather than ignoring it.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Use the utility routine qemu_set_cloexec() rather than
manually calling fcntl(). This lets us drop the #ifndef _WIN32
guards and also means Coverity doesn't complain that we're
ignoring the fcntl error return (CID 1005665, CID 1005667).
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Generate an XML description for the cp-regs.
Register these regs with the gdb_register_coprocessor().
Add arm_gdb_get_sysreg() to use it as a callback to read those regs.
Add a dummy arm_gdb_set_sysreg().
Signed-off-by: Abdallah Bouassida <abdallah.bouassida@lauterbach.com>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 1524153386-3550-4-git-send-email-abdallah.bouassida@lauterbach.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
memtohex() adds an extra trailing NUL character.
Reported-by: AddressSanitizer
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20180408145933.1149-1-f4bug@amsat.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Since the commit:
commit 4486e89c21
Author: Stefan Hajnoczi <stefanha@redhat.com>
Date: Wed Mar 7 14:42:05 2018 +0000
vl: introduce vm_shutdown()
GDB crashes when qemu exits (at least on sparc-softmmu):
Remote communication error. Target disconnected.: Connection reset by peer.
Quitting: putpkt: write failed: Broken pipe.
So send a packet to exit GDB before we exit QEMU:
[Inferior 1 (Thread 0) exited normally]
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: KONRAD Frederic <frederic.konrad@adacore.com>
Message-id: 1521538773-30802-1-git-send-email-frederic.konrad@adacore.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
On NetBSD, where tolower() and toupper() are implemented using an
array lookup, the compiler warns if you pass a plain 'char'
to these functions:
gdbstub.c:914:13: warning: array subscript has type 'char'
This reflects the fact that toupper() and tolower() give
undefined behaviour if they are passed a value that isn't
a valid 'unsigned char' or EOF.
We have qemu_tolower() and qemu_toupper() to avoid this problem;
use them.
(The use in scsi-generic.c does not trigger the warning because
it passes a uint8_t; we switch it anyway, for consistency.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com> for the s390 part.
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Message-id: 1500568290-7966-1-git-send-email-peter.maydell@linaro.org
The thread-id of 0 means any CPU but we then ignore the fact we find
the first_cpu in this case who can have an index of 0. Instead of
bailing out just test if we have managed to match up thread-id to a
CPU.
Otherwise you get:
gdb_handle_packet: command='vCont;C04:0;c'
put_packet: reply='E22'
The actual reason for gdb sending vCont;C04:0;c was fixed in a
previous commit where we ensure the first_cpu's tid is correctly
reported to gdb however we should still behave correctly next time it
does send 0.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Claudio Imbrenda <imbrenda@linux.vnet.ibm.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20170712105216.747-5-alex.bennee@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This was only used by the gdbstub and even then was only being set for
subsequent threads. Rather the continue duplicating the number just
make the gdbstub get the information from TaskState structure.
Now the tid is correctly reported for all threads the bug I was seeing
with "vCont;C04:0;c" packets is fixed as the correct tid is reported
to gdb.
I moved cpu_gdb_index into the gdbstub to facilitate easy access to
the TaskState which is used elsewhere in gdbstub.
To prevent BSD failing to build I've included ts_tid into its
TaskStruct but not populated it - which was the same state as the old
cpu->host_tid. I'll leave it up to the BSD maintainers to actually
populate this properly if they want a working gdbstub with
user-threads.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Claudio Imbrenda <imbrenda@linux.vnet.ibm.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20170712105216.747-4-alex.bennee@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This is to make it clear the index is purely a gdbstub function and
should not be confused with the value of cpu->cpu_index. At the same
time we move the function from the header to gdbstub itself which will
help with later changes.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Claudio Imbrenda <imbrenda@linux.vnet.ibm.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20170712105216.747-3-alex.bennee@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Convert the a gdb_debug helper which compiles away to nothing when not
used but still ensures the format strings are checked. There is some
minor code motion for the incorrect checksum message to report it
before we attempt to send the reply.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Greg Kurz <groug@kaod.org>
Message-Id: <20170712105216.747-2-alex.bennee@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Frontends should have an interface to setup the handler of a backend change.
The interface will be used in the next commits
Signed-off-by: Anton Nefedov <anton.nefedov@virtuozzo.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <1499342940-56739-3-git-send-email-anton.nefedov@virtuozzo.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This simplifies removing a backend for a frontend user (no need to
retrieve the associated driver and separate delete call etc).
NB: many frontends have questionable handling of ending a chardev. They
should probably delete the backend to prevent broken reusage.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Move all the frontend struct and methods to a seperate unit. This avoids
accidentally mixing backend and frontend calls, and helps with readabilty.
Make qemu_chr_replay() a macro shared by both char and char-fe.
Export qemu_chr_write(), and use a macro for qemu_chr_write_all()
(nb: yes, CharBackend is for char frontend :)
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
So they are all in one place. The following patch will move serial &
parallel declarations to the respective headers.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
- decode escape sequences
- decompress run-length encoding escape sequences
- report command parsing problems to output when debug output is enabled
- reject packet checksums that are not valid hex digits
- compute the checksum based on the packet stream, not based on the
decoded packet
Tested with GDB and QtCreator integrated debugger on SMP QEMU instance.
Works for me.
Signed-off-by: Doug Gale <doug16k@gmail.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Add a /chardevs container object to hold the list of chardevs.
(Note: QTAILQ chardevs is going away in the following commits)
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
When GDB issues a "vCont", QEMU was not handling it correctly when
multiple VCPUs are active.
For vCont, for each thread (VCPU), it can be specified whether to
single step, continue or stop that thread. The default is to stop a
thread.
However, when (for example) "vCont;s:2" is issued, all VCPUs continue
to run, although all but VCPU nr 2 are to be stopped.
This patch completely rewrites the vCont parsing code.
Please note that this improvement only works in system emulation mode,
when in userspace emulation mode the old behaviour is preserved.
Signed-off-by: Claudio Imbrenda <imbrenda@linux.vnet.ibm.com>
Message-Id: <1487092068-16562-3-git-send-email-imbrenda@linux.vnet.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Turn Chardev into Object.
qemu_chr_alloc() is replaced by the qemu_chardev_new() constructor. It
will call qemu_char_open() to open/intialize the chardev with the
ChardevCommon *backend settings.
The CharDriver::create() callback is turned into a ChardevClass::open()
which is called from the newly introduced qemu_chardev_open().
"chardev-gdb" and "chardev-hci" are internal chardev and aren't
creatable directly with -chardev. Use a new internal flag to disable
them. We may want to use TYPE_USER_CREATABLE interface instead, or
perhaps allow -chardev usage.
Although in general we keep typename and macros private, unless the type
is being used by some other file, in this patch, all types and common
helper macros for qemu-char.c are in char.h. This is to help transition
now (some types must be declared early, while some aren't shared) and
when splitting in several units. This is to be improved later.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Pick a uniform chardev type name.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Use a single allocation for CharDriverState, this avoids extra
allocations & pointers, and is a step towards more object-oriented
CharDriver.
Gtk console is a bit peculiar, gd_vc_chr_set_echo() used to have a
temporary VirtualConsole to save the echo bit. Instead now, we consider
whether vcd->console is set or not, and restore the echo bit saved in
VCDriverState when calling gd_vc_vte_init().
The casts added are temporary, they are replaced with QOM type-safe
macros in a later patch in this series.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This makes the code more declarative, and avoids duplicating the
information on all instances.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Some updates from fprintf(stderr, ...) to error_report.
Signed-off-by: Ziyue Yang <skiver.cloud.yzy@gmail.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
This patch is to fix the segmentation fault caused by attaching
GDB to a QEMU instance initialized with "-M none" option.
The bug can be reproduced by
> ./qemu-system-x86_64 -M none -nographic -S -s
and attach a GDB to it by
> gdb -ex 'target remote :1234
The segmentation fault was originally caused by trying to read
the information about CPU when communicating with GDB. However,
it's impossible for any control flow to exist on an empty machine,
nor can CPU's be hot plugged to an empty machine later by QOM
commands. So I think simply disabling GDB connections on empty
machines makes sense.
Signed-off-by: Ziyue Yang <skiver.cloud.yzy@gmail.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Move the generic cpu_synchronize_ functions to the common hw_accel.h header,
in order to prepare for the addition of a second hardware accelerator.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Vincent Palatin <vpalatin@chromium.org>
Message-Id: <f5c3cffe8d520011df1c2e5437bb814989b48332.1484045952.git.vpalatin@chromium.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Markus Armbruster
Luc Michel
Sandra Loosemore
Paolo Bonzini
Max Filippov
Peter Maydell
Philippe Mathieu-Daudé
Marc-André Lureau
Philippe Mathieu-Daudé
Abdallah Bouassida
KONRAD Frederic
Doug Gale
Alex Bennée
Anton Nefedov
Claudio Imbrenda
Ziyue Yang
Vincent Palatin