Commit Graph

262 Commits

Author SHA1 Message Date
Anthony Liguori bf6e3cc4fa Merge remote-tracking branch 'bonzini/scsi-next' into staging
# By Paolo Bonzini (4) and Peter Lieven (1)
# Via Paolo Bonzini
* bonzini/scsi-next:
  help: add id suboption to -iscsi
  scsi-disk: fix WRITE SAME with large non-zero payload
  block/iscsi: introduce bdrv_co_{readv, writev, flush_to_disk}
  scsi-disk: fix VERIFY emulation
  scsi-bus: fix transfer length and direction for VERIFY command

Message-id: 1386594157-17535-1-git-send-email-pbonzini@redhat.com
Signed-off-by: Anthony Liguori <aliguori@amazon.com>
2013-12-13 11:10:02 -08:00
Paolo Bonzini 2fe3798cd5 help: add id suboption to -iscsi
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-12-09 13:47:24 +01:00
Vincenzo Maffione 58952137b0 net: Adding netmap network backend
This patch adds support for a network backend based on netmap.
netmap is a framework for high speed packet I/O. You can use it
to build extremely fast traffic generators, monitors, software
switches or network middleboxes. Its companion software switch
VALE lets you interconnect virtual machines.
netmap and VALE are implemented as a non-intrusive kernel module,
support NICs from multiple vendors, are part of standard FreeBSD
distributions and available in source format for Linux too.

To compile QEMU with netmap support, use the following configure
options:
    ./configure [...] --enable-netmap --extra-cflags=-I/path/to/netmap/sys
where "/path/to/netmap" contains the netmap source code, available at
    http://info.iet.unipi.it/~luigi/netmap/

The same webpage contains more information about the netmap project
(together with papers and presentations).

Signed-off-by: Vincenzo Maffione <v.maffione@gmail.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-12-09 13:33:19 +01:00
Marcelo Tosatti ef36fa1492 qemu: mempath: prefault pages manually (v4)
v4: s/fail/failed/  (Peter Maydell)

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2013-11-25 11:28:56 +01:00
Amos Kong 420508fbba doc: fix hardcoded helper path
The install directory of qemu-bridge-helper is configurable,
but we use a fixed path in the documentation.

DEFAULT_BRIDGE_HELPER macro isn't available in texi mode,
we should always use "/path/to/" prefix for dynamic paths
(e.g.: /path/to/image, /path/to/linux, etc).

Signed-off-by: Amos Kong <akong@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-11-18 13:45:10 +02:00
Benoît Canet 2024c1df43 block: Add iops_size to do the iops accounting for a given io size.
This feature can be used in case where users are avoiding the iops limit by
doing jumbo I/Os hammering the storage backend.

Signed-off-by: Benoit Canet <benoit@irqsave.net>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-09-06 15:25:07 +02:00
Benoît Canet 3e9fab690d block: Add support for throttling burst max in QMP and the command line.
The max parameter of the leaky bucket throttling algorithm can be used to
allow the guest to do bursts.
The max value is a pool of I/O that the guest can use without being throttled
at all. Throttling is triggered once this pool is empty.

Signed-off-by: Benoit Canet <benoit@irqsave.net>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-09-06 15:25:07 +02:00
Markus Armbruster 4f57378fe6 Revert "chardev: Make the name of memory device consistent"
This reverts commit 6a85e60cb9.

Commit 51767e7 "qemu-char: Add new char backend CirMemCharDriver"
introduced a memory ring buffer character device driver named
"memory".  Commit 3949e59 "qemu-char: Saner naming of memchar stuff &
doc fixes" changed the driver name to "ringbuf", along with a whole
bunch of other names, with the following rationale:

    Naming is a mess.  The code calls the device driver
    CirMemCharDriver, the public API calls it "memory", "memchardev",
    or "memchar", and the special commands are named like
    "memchar-FOO".  "memory" is a particularly unfortunate choice,
    because there's another character device driver called
    MemoryDriver.  Moreover, the device's distinctive property is that
    it's a ring buffer, not that's in memory.

This is what we released in 1.4.0.

Unfortunately, the rename missed a critical instance of "memory": the
actual driver name.  Thus, the new device could be used only by an
entirely undocumented name.  The documented name did not work.
Bummer.

Commit 6a85e60 fixes this by changing the documentation to match the
code.  It also changes some, but not all related occurences of
"ringbuf" to "memory".  Left alone are identifiers in C code, HMP and
QMP commands.  The latter are external interface, so they can't be
changed.

The result is an inconsistent mess.  Moreover, "memory" is a rotten
name.  The device's distinctive property is that it's a ring buffer,
not that's in memory.  User's don't care whether it's in RAM, flash,
or carved into chocolate tablets by Oompa Loompas.

Revert the commit.  Next commit will fix just the bug.

Cc: qemu-stable@nongnu.org
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 1374849874-25531-2-git-send-email-armbru@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-07-29 10:37:11 -05:00
Ramkumar Ramachandra b031f413b9 qemu-options: mention C-a h in the -nographic doc
Otherwise, a new user will be wondering how to switch between the
console and monitor.

Cc: Anthony Liguori <aliguori@us.ibm.com>
Cc: Stefan Hajnoczi <stefanha@redhat.com>
Cc: Markus Armbruster <armbru@redhat.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2013-07-27 11:22:54 +04:00
Michael Tokarev be022d61f4 doc: monitor multiplexing rewording
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2013-07-19 12:52:03 +04:00
Seiji Aguchi 5e2ac51917 add timestamp to error_report()
[Issue]
When we offer a customer support service and a problem happens
in a customer's system, we try to understand the problem by
comparing what the customer reports with message logs of the
customer's system.

In this case, we often need to know when the problem happens.

But, currently, there is no timestamp in qemu's error messages.
Therefore, we may not be able to understand the problem based on
error messages.

[Solution]
Add a timestamp to qemu's error message logged by
error_report() with g_time_val_to_iso8601().

Signed-off-by: Seiji Aguchi <seiji.aguchi@hds.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2013-07-10 13:42:09 -04:00
Paolo Bonzini 02c4bdf1d2 trap signals for "-serial mon:stdio"
With mon:stdio you can exit the VM by switching to the monitor and
sending the "quit" command.  It is then useful to pass Ctrl-C to the
VM instead of exiting.

This in turn lets us stop tying the default signal handling behavior
to -nographic, removing gratuitous differences between "-display none"
and "-nographic".

This patch changes behavior for "-display none -serial mon:stdio", as
expected, but not for "-display none -serial stdio".

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1372868986-25988-1-git-send-email-mjt@msgid.tls.msk.ru
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-07-09 13:14:06 -05:00
Michael Tokarev 12b7f57e2c vl: convert -smp to qemu_opts_parse()
This also introduces a new suboption, "cpus=",
which is the default.  So after this patch,

 -smp n,sockets=y

is the same as

  -smp cpus=n,sockets=y

(with "cpu" being some generic thing, referring to
either cores, or threads, or sockets, as before).

We still don't validate relations between different
numbers, for example it is still possible to say

  -smp 1,sockets=10

and it will be accepted to mean sockets=1.

Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Message-id: 1372072012-30305-1-git-send-email-mjt@msgid.tls.msk.ru
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-06-28 14:02:14 -05:00
Anthony Liguori 9fbbf0d1b1 Merge remote-tracking branch 'spice/spice.v71' into staging
# By Gerd Hoffmann (1) and Hans de Goede (1)
# Via Gerd Hoffmann
* spice/spice.v71:
  spice: Add -spice disable-agent-file-transfer cmdline option (rhbz#961850)
  qxl: fix Coverity scan SIGN_EXTENSION error

Message-id: 1372060666-18182-1-git-send-email-kraxel@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-06-24 14:33:09 -05:00
Hans de Goede 5ad24e5f3b spice: Add -spice disable-agent-file-transfer cmdline option (rhbz#961850)
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2013-06-24 08:23:09 +02:00
Michael Tokarev f17e4eaafc qemu-options: trivial fix for -mon args help
It is the (implied sub)option name which is optional, not
the value of that (sub)option, make it so in the help output.
(Introduced by commit 22a0e04b9b)

Cc: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2013-06-21 22:52:50 +04:00
Markus Armbruster 4eda32f588 doc: Drop ref to Bochs from -no-fd-bootchk documentation
Manual page and qemu-doc on talk about "Bochs BIOS".  We use SeaBIOS,
and it implements the feature.  Replace by just "BIOS", and drop the
TODO line wondering about the Bochs reference.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
Message-id: 1371208516-7857-7-git-send-email-armbru@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-06-19 14:10:44 -05:00
Luiz Capitulino 70e098af88 monitor: allow to disable the default monitor
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2013-05-23 09:58:45 -04:00
Lei Li 6a85e60cb9 chardev: Make the name of memory device consistent
Now we have memory char device, but the backend name of it
is a little confusion. We actually register it by 'memory', but
the description in qemu-option, the name of open functions
and the new api backend called it 'ringbuf'. It should keep
consistent. This patch named it all to 'memory'.

Signed-off-by: Lei Li <lilei@linux.vnet.ibm.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 1369132079-11377-2-git-send-email-lilei@linux.vnet.ibm.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-05-22 07:40:10 -05:00
Tim Hardeck 0057a0d590 TLS support for VNC Websockets
Added TLS support to the VNC QEMU Websockets implementation.
VNC-TLS needs to be enabled for this feature to be used.

The required certificates are specified as in case of VNC-TLS
with the VNC parameter "x509=<path>".

If the server certificate isn't signed by a rooth authority it needs to
be manually imported in the browser because at least in case of Firefox
and Chrome there is no user dialog, the connection just gets canceled.

As a side note VEncrypt over Websocket doesn't work atm because TLS can't
be stacked in the current implementation. (It also didn't work before)
Nevertheless to my knowledge there is no HTML 5 VNC client which supports
it and the Websocket connection can be encrypted with regular TLS now so
it should be fine for most use cases.

Signed-off-by: Tim Hardeck <thardeck@suse.de>
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
Message-id: 1366727581-5772-1-git-send-email-thardeck@suse.de
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-05-03 12:04:57 -05:00
Satoru Moriya 888a6bc63c Add option to mlock qemu and guest memory
In certain scenario, latency induced by paging is significant and
memory locking is needed. Also, in the scenario with untrusted
guests, latency improvement due to mlock is desired.

This patch introduces a following new option to mlock guest and
qemu memory:

-realtime mlock=on|off

Signed-off-by: Satoru Moriya <satoru.moriya@hds.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1366382526-26146-1-git-send-email-pbonzini@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-04-22 08:52:23 -05:00
Richard W.M. Jones 0a12ec87a5 block: Add support for Secure Shell (ssh) block device.
qemu-system-x86_64 -drive file=ssh://hostname/some/image

QEMU will ssh into 'hostname' and open '/some/image' which is made
available as a standard block device.

You can specify a username (ssh://user@host/...) and/or a port number
(ssh://host:port/...).  You can also use an alternate syntax using
properties (file.user, file.host, file.port, file.path).

Current limitations:

- Authentication must be done without passwords or passphrases, using
  ssh-agent.  Other authentication methods are not supported.

- Uses a single connection, instead of concurrent AIO with multiple
  SSH connections.

This is implemented using libssh2 on the client side.  The server just
requires a regular ssh daemon with sftp-server support.  Most ssh
daemons on Unix/Linux systems will work out of the box.

Signed-off-by: Richard W.M. Jones <rjones@redhat.com>
Cc: Stefan Hajnoczi <stefanha@gmail.com>
Cc: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-04-15 10:18:05 +02:00
Jason Wang ec3960148f help: add docs for missing 'queues' option of tap
Cc: Markus Armbruster <armbru@redhat.com>
Cc: qemu-stable@nongnu.org
Signed-off-by: Jason Wang <jasowang@redhat.com>
Message-id: 1361545072-30426-1-git-send-email-jasowang@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-04-03 15:09:07 -05:00
Corey Bryant 28c4fa32bd QMP: TPM QMP and man page documentation updates
Signed-off-by: Corey Bryant <coreyb@linux.vnet.ibm.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2013-03-25 16:21:33 -04:00
Peter Maydell 085d813407 Fix typos and misspellings
Fix various typos and misspellings. The bulk of these were found with
codespell.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-03-22 13:25:07 +01:00
Amos Kong c8a6ae8bb9 add a boot option to do strict boot
Seabios already added a new device type to halt booting.
Qemu can add "HALT" at the end of bootindex string, then
seabios will halt booting after trying to boot from all
selected devices.

This patch added a new boot option to configure if boot
from un-selected devices.

This option only effects when boot priority is changed by
bootindex options, the old style(-boot order=..) will still
try to boot from un-selected devices.

v2: add HALT entry in get_boot_devices_list()
v3: rebase to latest qemu upstream

Signed-off-by: Amos Kong <akong@redhat.com>
Message-id: 1363674207-31496-1-git-send-email-akong@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-03-19 08:00:10 -05:00
Stefan Berger 92dcc234ec Add support for cancelling of a TPM command
This patch adds support for cancelling an executing TPM command.
In Linux for example a user can cancel a command through the TPM's
sysfs 'cancel' entry using

echo "1" > /sysfs/class/misc/tpm0/device/cancel

This patch propagates the cancellation of a command inside a VM
to the host TPM's sysfs entry.
It also uses the possibility to cancel the command before QEMU VM
shutdown or reboot, which helps in preventing QEMU from hanging while
waiting for the completion of the command.
To relieve higher layers or users from having to determine the TPM's
cancel sysfs entry, the driver searches for the entry in well known
locations.

Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Reviewed-by: Corey Bryant <coreyb@linux.vnet.ibm.com>
Reviewed-by: Joel Schopp <jschopp@linux.vnet.ibm.com>
Message-id: 1361987275-26289-7-git-send-email-stefanb@linux.vnet.ibm.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-03-12 13:40:55 -05:00
Stefan Berger 4549a8b7ee Add a TPM Passthrough backend driver implementation
This patch is based of off version 9 of Stefan Berger's patch series
  "QEMU Trusted Platform Module (TPM) integration"
and adds a new backend driver for it.

This patch adds a passthrough backend driver for passing commands sent to the
emulated TPM device directly to a TPM device opened on the host machine.
Thus it is possible to use a hardware TPM device in a system running on QEMU,
providing the ability to access a TPM in a special state (e.g. after a Trusted
Boot).

This functionality is being used in the acTvSM Trusted Virtualization Platform
which is available on [1].

Usage example:
  qemu-system-x86_64 -tpmdev passthrough,id=tpm0,path=/dev/tpm0 \
                     -device tpm-tis,tpmdev=tpm0 \
                     -cdrom test.iso -boot d

Some notes about the host TPM:
The TPM needs to be enabled and activated. If that's not the case one
has to go through the BIOS/UEFI and enable and activate that TPM for TPM
commands to work as expected.
It may be necessary to boot the kernel using tpm_tis.force=1 in the boot
command line or 'modprobe tpm_tis force=1' in case of using it as a module.

Regards,
Andreas Niederl, Stefan Berger

[1] http://trustedjava.sourceforge.net/

Signed-off-by: Andreas Niederl <andreas.niederl@iaik.tugraz.at>
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Reviewed-by: Corey Bryant <coreyb@linux.vnet.ibm.com>
Reviewed-by: Joel Schopp <jschopp@linux.vnet.ibm.com>
Message-id: 1361987275-26289-6-git-send-email-stefanb@linux.vnet.ibm.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-03-12 13:40:55 -05:00
Stefan Berger d1a0cf738d Support for TPM command line options
This patch adds support for TPM command line options.
The command line options supported here are

./qemu-... -tpmdev passthrough,path=<path to TPM device>,id=<id>
           -device tpm-tis,tpmdev=<id>,id=<other id>

and

./qemu-... -tpmdev help

where the latter works similar to -soundhw help and shows a list of
available TPM backends (for example 'passthrough').

Using the type parameter, the backend is chosen, i.e., 'passthrough' for the
passthrough driver. The interpretation of the other parameters along
with determining whether enough parameters were provided is pushed into
the backend driver, which needs to implement the interface function
'create' and return a TPMDriverOpts structure if the VM can be started or
'NULL' if not enough or bad parameters were provided.

Monitor support for 'info tpm' has been added. It for example prints the
following:

(qemu) info tpm
TPM devices:
 tpm0: model=tpm-tis
  \ tpm0: type=passthrough,path=/dev/tpm0,cancel-path=/sys/devices/pnp0/00:09/cancel

Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Reviewed-by: Corey Bryant <coreyb@linux.vnet.ibm.com>
Reviewed-by: Joel Schopp <jschopp@linux.vnet.ibm.com>
Message-id: 1361987275-26289-2-git-send-email-stefanb@linux.vnet.ibm.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-03-12 13:40:11 -05:00
Lei Li db2d5eba65 Fix the wrong description in qemu manual
Fix LP#1151450 the wrong description in qemu manual:

'qemu-system-x86_84' should be 'qemu-system-x86_64'.

Signed-off-by: Lei Li <lilei@linux.vnet.ibm.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-03-08 13:15:27 +01:00
Anthony Liguori 71df81afc6 Merge remote-tracking branch 'stefanha/block' into staging
# By MORITA Kazutaka (5) and others
# Via Stefan Hajnoczi
* stefanha/block:
  block: for HMP commit() operations on 'all', skip non-COW drives
  sheepdog: add support for connecting to unix domain socket
  sheepdog: use inet_connect to simplify connect code
  sheepdog: accept URIs
  move socket_set_nodelay to osdep.c
  slirp/tcp_subr.c: fix coding style in tcp_connect
  dataplane: remove EventPoll in favor of AioContext
  virtio-blk: fix unplug + virsh reboot
  ide/macio: Fix macio DMA initialisation.
2013-03-04 08:22:48 -06:00
MORITA Kazutaka 1b8bbb46e7 sheepdog: add support for connecting to unix domain socket
This patch adds support for a unix domain socket for a connection
between qemu and local sheepdog server.  You can use the unix domain
socket with the following syntax:

 $ qemu sheepdog+unix:///<vdiname>?socket=<socket path>[#snapid]

Signed-off-by: MORITA Kazutaka <morita.kazutaka@lab.ntt.co.jp>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-03-04 09:54:17 +01:00
MORITA Kazutaka 5d6768e3b8 sheepdog: accept URIs
The URI syntax is consistent with the NBD and Gluster syntax.  The
syntax is

  sheepdog[+tcp]://[host:port]/vdiname[#snapid|#tag]

Signed-off-by: MORITA Kazutaka <morita.kazutaka@lab.ntt.co.jp>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-03-04 09:54:17 +01:00
Stefan Hajnoczi 40e8c26d7b doc: document -netdev hubport
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-02-27 16:10:47 +01:00
Peter Maydell 989b697ddd qemu-log: default to stderr for logging output
Switch the default for qemu_log logging output from "/tmp/qemu.log"
to stderr. This is an incompatible change in some sense, but logging
is mostly used for debugging purposes so it shouldn't affect production
use. The previous behaviour can be obtained by adding "-D /tmp/qemu.log"
to the command line.

This change requires us to:
 * update all the documentation/help text (we take the opportunity
   to smooth out minor inconsistencies between the phrasing in
   linux-user/bsd-user/system help messages)
 * make linux-user and bsd-user defer to qemu-log for the default
   logging destination rather than overriding it themselves
 * ensure that all logfile closing is done via qemu_log_close()
   and that that function doesn't close stderr
as well as the obvious change to the behaviour of do_qemu_set_log()
when no logfile name has been specified.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-id: 1361901160-28729-1-git-send-email-peter.maydell@linaro.org
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-02-26 13:31:47 -06:00
Paolo Bonzini a9384aff53 blockdev: add discard suboption to -drive
Add support for BDRV_O_UNMAP from the QEMU command-line.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2013-02-22 21:29:42 +01:00
Jason Wang 2ca81baa0b help: add docs for multiqueue tap options
Cc: Markus Armbruster <armbru@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Message-id: 1361354641-51969-1-git-send-email-jasowang@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-02-21 16:33:48 -06:00
Markus Armbruster 10adb8be87 doc help: Collect block device stuff under its own heading
Collect them from "Standard options", "File system options", "Virtual
File system pass-through options", "Debug/Expert options".

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 1360781383-28635-8-git-send-email-armbru@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-02-18 08:39:48 -06:00
Markus Armbruster 84644c451c doc help: A few options are under inappropriate headings, fix
--device is under heading "USB options".  --name and --uuid are under
"Virtual File system pass-through options".  Move all three to
"Standard options".

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 1360781383-28635-7-git-send-email-armbru@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-02-18 08:39:48 -06:00
Markus Armbruster f037809907 help: Fix markup of heading "USB options" so it appears in -help
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 1360781383-28635-6-git-send-email-armbru@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-02-18 08:39:48 -06:00
Markus Armbruster c70a01e449 doc: Fix texinfo @table markup in qemu-options.hx
End tables before headings, start new ones afterwards.  Fixes
incorrect indentation of headings "File system options" and "Virtual
File system pass-through options" in manual page and qemu-doc.

Normalize markup some to increase chances it survives future edits.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 1360781383-28635-5-git-send-email-armbru@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-02-18 08:39:48 -06:00
Markus Armbruster 6265c43b0c doc: Fill some option doc gaps in manual page and qemu-doc
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 1360781383-28635-4-git-send-email-armbru@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-02-18 08:39:48 -06:00
Markus Armbruster b8f490eb27 doc: Fix some option entries in qemu-doc's function index
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 1360781383-28635-3-git-send-email-armbru@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-02-18 08:39:47 -06:00
Markus Armbruster 31e70d6c12 help: Drop bogus help on -qtest and -qtest-log
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 1360781383-28635-2-git-send-email-armbru@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-02-18 08:39:47 -06:00
Markus Armbruster d037d6bbbc chardev: Fix manual page and qemu-doc for -chardev tty
Broken in commit d59044ef.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Message-id: 1360767256-610-2-git-send-email-armbru@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-02-13 11:57:32 -06:00
Markus Armbruster 3949e59414 qemu-char: Saner naming of memchar stuff & doc fixes
New device, has never been released, so we can still improve things
without worrying about compatibility.

Naming is a mess.  The code calls the device driver CirMemCharDriver,
the public API calls it "memory", "memchardev", or "memchar", and the
special commands are named like "memchar-FOO".  "memory" is a
particularly unfortunate choice, because there's another character
device driver called MemoryDriver.  Moreover, the device's distinctive
property is that it's a ring buffer, not that's in memory.  Therefore:

* Rename CirMemCharDriver to RingBufCharDriver, and call the thing a
  "ringbuf" in the API.

* Rename QMP and HMP commands from memchar-FOO to ringbuf-FOO.

* Rename device parameter from maxcapacity to size (simple words are
  good for you).

* Clearly mark the parameter as optional in documentation.

* Fix error reporting so that chardev-add reports to current monitor,
  not stderr.

* Replace cirmem in C identifiers by ringbuf.

* Rework documentation.  Document the impact of our crappy UTF-8
  handling on reading.

* QMP examples that even work.

I could split this up into multiple commits, but they'd change the
same documentation lines multiple times.  Not worth it.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-02-06 16:35:19 -06:00
Lei Li 51767e7cf2 qemu-char: Add new char backend CirMemCharDriver
Signed-off-by: Lei Li <lilei@linux.vnet.ibm.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2013-01-25 11:23:06 -02:00
Tim Hardeck 7536ee4bc3 vnc: added initial websocket protocol support
This patch adds basic Websocket Protocol version 13 - RFC 6455 - support
to QEMU VNC. Binary encoding support on the client side is mandatory.

Because of the GnuTLS requirement the Websockets implementation is
optional (--enable-vnc-ws).

To activate Websocket support the VNC option "websocket"is used, for
example "-vnc :0,websocket".
The listen port for Websocket connections is (5700 + display) so if
QEMU VNC is started with :0 the Websocket port would be 5700.
As an alternative the Websocket port could be manually specified by
using ",websocket=<port>" instead.

Parts of the implementation base on Anthony Liguori's QEMU Websocket
patch from 2010 and on Joel Martin's LibVNC Websocket implementation.

Signed-off-by: Tim Hardeck <thardeck@suse.de>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-01-21 13:33:12 -06:00
Gerd Hoffmann 88a946d32d chardev: add parallel chardev support to chardev-add (qmp)
Also alias the old parport name to parallel for -chardev.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2013-01-16 06:58:54 +01:00
Gerd Hoffmann d59044ef74 chardev: add serial chardev support to chardev-add (qmp)
Similar to file, except that no separate in/out files are supported
because it's pointless for direct device access.  Also the special
tty ioctl hooks (pass through linespeed settings etc) are activated
on Unix.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2013-01-16 06:58:54 +01:00