Add the dmi-to-pci i82801b11 bridge chip. This is the pci bridge chip
that q35 uses on its host bus for PCI bus arbitration.
Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: Jason Baron <jbaron@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Add support for the ich9 smbus chip.
Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: Jason Baron <jbaron@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Lay the groundwork for subsequent ich9 support.
Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: Jason Baron <jbaron@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Factor out smram/pam logic for use by other chipsets, namely q35
at this point.
Note: Should be factored out into a generic North Bridge Class.
[jbaron@redhat.com: changes for updated memory API]
Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: Jason Baron <jbaron@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
The Linux kernel already has a virtio-rng driver, this is the device
implementation.
When the guest asks for entropy from the virtio hwrng, it puts a buffer
in the vq. We then put entropy into that buffer, and push it back to
the guest.
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
---
aliguori: converted to new RngBackend interface
aliguori: remove entropy needed event
aliguori: fix migration
Split serial.c into serial.c, serial.h and serial-isa.c. While being at
creating a serial.h header file move the serial prototypes from pc.h to
the new serial.h. The latter leads to s/pc.h/serial.h/ in tons of
boards which just want the serial bits from pc.h
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
The entries for libhw* are no longer needed in .gitignore.
There is also no longer a difference between common-obj-y and
hw-obj-y, so one of those two macros is sufficient.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Enabled for all softmmu guests supporting PCI on Linux hosts. Note
that currently only x86 hosts have the kernel side VFIO IOMMU support
for this. PPC (g3beige) is the only non-x86 guest known to work.
ARM (veratile) hangs in firmware, others untested.
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This allows any QEMU binary to be executed with:
$QEMU_BINARY -M none -qmp stdio
Without errors from missing options that are required by various boards. This
also provides a mode that we can use in the future to construct machines
entirely through QMP commands.
Cc: Daniel Berrange <berrange@redhat.com>
Cc: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Avoids some unnecessary dependencies on cpu.h and prepares for
a future armeb-softmmu where most machines would not be built.
Defer touching the SoC devices since most have implicit or explicit
dependencies on the CPU.
Signed-off-by: Andreas Färber <andreas.faerber@suse.de>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Re-implemented the interconnect between the Xilinx AXI ethernet and DMA
controllers. A QOM interface "stream" is created, for the two stream interfaces.
As per Edgars request, this is designed to be more generic than AXI-stream,
so in the future we may see more clients of this interface beyond AXI stream.
This is based primarily on Paolos original refactoring of the interconnect.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Peter A.G. Crosthwaite <peter.crosthwaite@petalogix.com>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
This patch adds puv3 dma (Direct Memory Access) support,
include dma device simulation for kernel booting.
v1->v2: Add initialization to ret in puv3_dma_read.
Signed-off-by: Guan Xuetao <gxt@mprc.pku.edu.cn>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
This patch adds puv3 pm (power management) support,
include pm device simulation for kernel booting.
Thank Blue Swirl for pointing out the missing "break".
v1->v2: Add initialization to ret in puv3_pm_read.
Signed-off-by: Guan Xuetao <gxt@mprc.pku.edu.cn>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
This patch adds puv3 gpio (General Purpose Input/Output) support,
include gpio device simulation and its interrupt support.
v1->v2: Add initialization to ret in puv3_gpio_read.
Signed-off-by: Guan Xuetao <gxt@mprc.pku.edu.cn>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
This patch adds puv3 ostimer support, include os timer
device simulation and ptimer support in puv3 machine.
Signed-off-by: Guan Xuetao <gxt@mprc.pku.edu.cn>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
This patch adds puv3 interrupt support, include interrupt controler
device simulation and interrupt handler in puv3 machine.
Signed-off-by: Guan Xuetao <gxt@mprc.pku.edu.cn>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
sparc machines loose ability to instanciate PCI ESP SCSI adapter,
which is not a big loose as they don't have PCI bus support.
Signed-off-by: Hervé Poussineau <hpoussin@reactos.org>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Commit f3d54fc4 factored it out of hw/ide.c for reuse. Sensible,
except it was put into block.c. Device-specific functionality should
be kept in device code, not the block layer. Move it to
hw/hd-geometry.c, and make stylistic changes required to keep
checkpatch.pl happy.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This patch adds an emulation for the LSI Megaraid SAS 8708EM2 HBA.
I've tested it to work with Linux, Windows Vista, and Windows7.
Signed-off-by: Hannes Reinecke <hare@suse.de>
[ Squashed trivial changes from Andreas Faerber, rebased over IOMMU
and QBus changes - Paolo ]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Speeds up the build.
xilinx_ethlite uses tswap32() and is thus target-dependent.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
This completes the move to nested Makefiles for virtio and a few
other files that were not part of obj-TARGET-y, but still were
compiled separately for each target.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
After this patch, the libhw* directories will have a hierarchy
that mimics the source tree. This is useful because we do have
a couple of files there that are in the top source directory.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This patch starts converting the hw/ directory. Some files in hw/
are compiled once, some twice (32-/64-bit), some once per target.
Each category is moved in a separate patch.
After this patch, the files that are compiled once will show the
same hierarchy in the build tree as they do in the source tree,
for example hw/qdev.o instead of just qdev.o.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Jason Baron
Isaku Yamahata
Amit Shah
Gerd Hoffmann
Peter A. G. Crosthwaite
Stefan Weil
Alex Williamson
Anthony Liguori
Andreas Färber
Guan Xuetao
Hervé Poussineau
Markus Armbruster
Hannes Reinecke
Paolo Bonzini