Use @var{firstcpu} and @var{lastcpu} to make the metasyntatic
variables a bit clearer. While doing this, use @var only around
the metasyntatic variables, not including the square brackets and
hyphen.
The semantics of the "cpus" option will be clarified by rewriting
the whole -numa documentation in a follow-up patch.
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20170123180632.28942-2-ehabkost@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Use the Intel HAX is kernel-based hardware acceleration module for
Windows (similar to KVM on Linux).
Based on the "target/i386: Add Intel HAX to android emulator" patch
from David Chou <david.j.chou@intel.com>
Signed-off-by: Vincent Palatin <vpalatin@chromium.org>
Message-Id: <7b9cae28a0c379ab459c7a8545c9a39762bd394f.1484045952.git.vpalatin@chromium.org>
[Drop hax_populate_ram stub. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Remove the colon, and add it in qemu-options-wrapper.h instead.
The introduction of @subsection also found a case where the table
was not closed and reopened around a heading, so fix it.
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Document:
1. The new debug and logfile options with their usages
2. New json format and its usage and
3. update "GlusterFS, Device URL Syntax" section in "Invocation"
Signed-off-by: Prasanna Kumar Kalever <prasanna.kalever@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Jeff Cody <jcody@redhat.com>
Because TFTP does not support byte ranges, it was never usable with our
curl block driver. Since apparently nobody has ever complained loudly
enough for someone to take care of the issue until now, it seems
reasonable to assume that nobody has ever actually used it.
Therefore, it should be safe to just drop it from curl's protocol list.
[Jeff Cody: Below is additional summary pulled, with some rewording,
from followup emails between Max and Markus, to explain what
worked and what didn't]
TFTP would sometimes work, to a limited extent, for images <= the curl
"readahead" size, so long as reads started at offset zero. By default,
that readahead size is 256KB.
Reads starting at a non-zero offset would also have returned data from a
zero offset. It can become more complicated still, with mixed reads at
zero offset and non-zero offsets, due to data buffering.
In short, TFTP could only have worked before in very specific scenarios
with unrealistic expectations and constraints.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Message-id: 20161102175539.4375-4-mreitz@redhat.com
Signed-off-by: Jeff Cody <jcody@redhat.com>
The new cryptodev backend named cryptodev-builtin,
which realized by QEMU cipher APIs. These APIs can
be backed by either nettle or gcrypt.
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This option does nothing since commit 06ac27f. Deprecate it.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Clean up the documentation for -chardev ringbuf. There is a stray
closing parenthesis and the comma is unnecessary.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
The tap backend is already using qemu-bridge-helper to attach tap
interface to a bridge but (unlike the bridge backend) it always uses
the default bridge name - br0.
This adds a "br" property support to the tap backend.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: Greg Kurz <groug@kaod.org>
Tested-by: Greg Kurz <groug@kaod.org>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Filter-rewriter is a part of COLO project.
It will rewrite some of secondary packet to make
secondary guest's tcp connection established successfully.
In this module we will rewrite tcp packet's ack to the secondary
from primary,and rewrite tcp packet's seq to the primary from
secondary.
usage:
colo secondary:
-object filter-redirector,id=f1,netdev=hn0,queue=tx,indev=red0
-object filter-redirector,id=f2,netdev=hn0,queue=rx,outdev=red1
-object filter-rewriter,id=rew0,netdev=hn0,queue=all
Signed-off-by: Zhang Chen <zhangchen.fnst@cn.fujitsu.com>
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Signed-off-by: Wen Congyang <wency@cn.fujitsu.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Updates the help messages to remove misleading information about SDL
being the normal display used.
Signed-off-by: Colin Lord <cdlord2@illinois.edu>
Message-Id: <1471030248-21637-1-git-send-email-cdlord2@illinois.edu>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
since f1d3e58, the code had changed the default value to 'off', so this patch
make document and code are consistent.
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Message-id: 1470024419-10886-1-git-send-email-lizhijian@cn.fujitsu.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The '-display' help information is not very correct. This patch sort
it a little.
Also, in its help information, reveals what implicit display option
will be chosen if no definition.
Signed-off-by: Robert Ho <robert.hu@intel.com>
Message-Id: <1469528231-26206-1-git-send-email-robert.hu@intel.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This patch add the capability of basic vhost net busy polling which is
supported by recent kernel. User could configure the maximum number of
us that could be spent on busy polling through a new property of tap
"poll-us".
Cc: Greg Kurz <groug@kaod.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Since iommu devices can be created with '-device' there is
no need to keep iommu as machine and mch property.
Signed-off-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This text will be included to qemu-nbd/qemu-img mans in the next patches.
Signed-off-by: Denis V. Lunev <den@openvz.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 1466174654-30130-3-git-send-email-den@openvz.org
CC: Paolo Bonzini <pbonzini@redhat.com>
CC: Stefan Hajnoczi <stefanha@redhat.com>
CC: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
[s/descriprion/description/ in commit message as suggested by Eric Blake
<eblake@redhat.com>.
--Stefan]
Signed-off-by: Denis V. Lunev <den@openvz.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 1466174654-30130-2-git-send-email-den@openvz.org
CC: Paolo Bonzini <pbonzini@redhat.com>
CC: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Switch make rules over to use trace-events-all as the
master trace events input file. Add rule that will
construct trace-events-all from $(trace-events-y).
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 1466066426-16657-2-git-send-email-berrange@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
QEMU compiles a list of data directories from various sources. When
consuming a QEMU binary it's useful to be able to get this list of
data directories: a primary reason is so you can list what BIOSes or
keymaps ship with this version of QEMU. However without reproducing
the method that QEMU uses internally, it's not possible to get the
list of data directories.
This commit adds a simple '-L help' option that just lists out the
data directories as qemu calculates them:
$ ./x86_64-softmmu/qemu-system-x86_64 -L help
/home/rjones/d/qemu/pc-bios
/usr/local/share/qemu
$ ./x86_64-softmmu/qemu-system-x86_64 -L /tmp -L help
/tmp
/home/rjones/d/qemu/pc-bios
/usr/local/share/qemu
Signed-off-by: Richard W.M. Jones <rjones@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <1463416475-11728-2-git-send-email-rjones@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The -machine kvm_shadow_mem option takes a size in bytes; say
so explicitly in its documentation.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reported-by: Tobi (github.com/tobimensch)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Robert Ho <robert.hu@intel.com>
Message-Id: <1464678190-9290-2-git-send-email-robert.hu@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Limits the rate kbd events from the vnc server are forwarded to the
guest, so input devices which are typically low-bandwidth can keep
up even on bulky input.
v2: update documentation too.
v3: spell fixes.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Tested-by: Yang Hongyang <hongyang.yang@easystack.cn>
Message-id: 1464762150-25817-1-git-send-email-kraxel@redhat.com
FW CFG's primary user is QEMU, which uses it to expose configuration
information (in the widest sense) to Firmware. Thus the name FW CFG.
FW CFG can also be used by others for their own purposes. QEMU is
merely acting as transport then. Names starting with opt/ are
reserved for such uses. There is no provision, however, to guide safe
sharing among different such users.
Fix that, loosely following QMP precedence: names should start with
opt/RFQDN/, where RFQDN is a reverse fully qualified domain name you
control.
Based on a more ambitious patch from Michael Tsirkin.
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Gabriel L. Somlo <somlo@cmu.edu>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Gabriel Somlo <somlo@cmu.edu>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
The docs for the secret object type specified the wrong number
of bytes for the AES initialization vector.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Add ipv4 and ipv6 boolean options, so the user can setup IPv4-only and
IPv6-only network environments.
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Filter-redirector is a netfilter plugin.
It gives qemu the ability to redirect net packet.
redirector can redirect filter's net packet to outdev.
and redirect indev's packet to filter.
filter
+
redirector |
+--------------+
| | |
indev +-----------+ +----------> outdev
| | |
+--------------+
|
v
filter
usage:
-netdev user,id=hn0
-chardev socket,id=s0,host=ip_primary,port=X,server,nowait
-chardev socket,id=s1,host=ip_primary,port=Y,server,nowait
-filter-redirector,id=r0,netdev=hn0,queue=tx/rx/all,indev=s0,outdev=s1
Signed-off-by: Zhang Chen <zhangchen.fnst@cn.fujitsu.com>
Signed-off-by: Wen Congyang <wency@cn.fujitsu.com>
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Filter-mirror is a netfilter plugin.
It gives qemu the ability to mirror
packets to a chardev.
usage:
-netdev tap,id=hn0
-chardev socket,id=mirror0,host=ip_primary,port=X,server,nowait
-filter-mirror,id=m0,netdev=hn0,queue=tx/rx/all,outdev=mirror0
Signed-off-by: Zhang Chen <zhangchen.fnst@cn.fujitsu.com>
Signed-off-by: Wen Congyang <wency@cn.fujitsu.com>
Reviewed-by: Yang Hongyang <hongyang.yang@easystack.cn>
Reviewed-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Rename the recently-added ip6-foo options into ipv6-foo options, to make
them coherent with other ipv6 options.
Also rework the documentation.
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
* Chardev fix from Marc-André
* config.status tweak from David
* Header file tweaks from Markus, myself and Veronia (Outreachy candidate)
* get_ticks_per_sec() removal from Rutuja (Outreachy candidate)
* Coverity fix from myself
* PKE implementation from myself, based on rth's XSAVE support
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
iQEcBAABCAAGBQJW9ErPAAoJEL/70l94x66DJfEH/A/QkMpAhrgNdyVsahzsGrzE
wx5gHFIc1nBYxyr62w4apUb5jPB7zaXu0LA7EAWDeAe0pyP8hZzLT9kJyOEDsuJu
zwKN2QeLSNMtPbnbKN0I/YQ2za2xX1V5ruhSeOJoVslUI214hgnAURaGshhQNzuZ
2CluDT9KgL5cQifAnKs5kJrwhIYShYNQB+1eDC/7wk28dd/EH+sPALIoF+rqrSmt
Zu4Mdqd+9Ns+oKOjA6br9ULq/Hzg0aDfY82J+XLVVqfF3PXQe8rTDmuMf/7jTn+M
Un7ZOcei9oZF2/9vfAfKQpDCcgD9HvOUSbgqV/ubmkPPmN/LNJzeKj0fBhrRN+Y=
=K12D
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into staging
* Log filtering from Alex and Peter
* Chardev fix from Marc-André
* config.status tweak from David
* Header file tweaks from Markus, myself and Veronia (Outreachy candidate)
* get_ticks_per_sec() removal from Rutuja (Outreachy candidate)
* Coverity fix from myself
* PKE implementation from myself, based on rth's XSAVE support
# gpg: Signature made Thu 24 Mar 2016 20:15:11 GMT using RSA key ID 78C7AE83
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>"
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>"
* remotes/bonzini/tags/for-upstream: (28 commits)
target-i386: implement PKE for TCG
config.status: Pass extra parameters
char: translate from QIOChannel error to errno
exec: fix error handling in file_ram_alloc
cputlb: modernise the debug support
qemu-log: support simple pid substitution for logs
target-arm: dfilter support for in_asm
qemu-log: dfilter-ise exec, out_asm, op and opt_op
qemu-log: new option -dfilter to limit output
qemu-log: Improve the "exec" TB execution logging
qemu-log: Avoid function call for disabled qemu_log_mask logging
qemu-log: correct help text for -d cpu
tcg: pass down TranslationBlock to tcg_code_gen
util: move declarations out of qemu-common.h
Replaced get_tick_per_sec() by NANOSECONDS_PER_SECOND
hw: explicitly include qemu-common.h and cpu.h
include/crypto: Include qapi-types.h or qemu/bswap.h instead of qemu-common.h
isa: Move DMA_transfer_handler from qemu-common.h to hw/isa/isa.h
Move ParallelIOArg from qemu-common.h to sysemu/char.h
Move QEMU_ALIGN_*() from qemu-common.h to qemu/osdep.h
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Conflicts:
scripts/clean-includes
This patches makes input-linux use -object instead of a new command line
switch. So, instead of the switch ...
-input-linux /dev/input/event$nr
... you must create an object this way:
-object input-linux,id=$name,evdev=/dev/input/event$nr
Bonus is that you can hot-add and hot-remove them via monitor now.
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1457681901-30916-1-git-send-email-kraxel@redhat.com
When debugging big programs or system emulation sometimes you want both
the verbosity of cpu,exec et all but don't want to generate lots of logs
for unneeded stuff. This patch adds a new option -dfilter which allows
you to specify interesting address ranges in the form:
-dfilter 0x8000..0x8fff,0xffffffc000080000+0x200,...
Then logging code can use the new qemu_log_in_addr_range() function to
decide if it will output logging information for the given range.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <1458052224-9316-7-git-send-email-alex.bennee@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This patch adds parameters to manage some new options in the qemu -net
command.
Slirp IPv6 address, network prefix, and DNS IPv6 address can be given in
argument to the qemu command.
Defaults parameters are respectively fec0::2, fec0::, /64 and fec0::3.
Signed-off-by: Yann Bordenave <meow@meowstars.org>
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
This patch adds support for reading input events directly from linux
evdev devices and forward them to the guest. Unlike virtio-input-host
which simply passes on all events to the guest without looking at them
this will interpret the events and feed them into the qemu input
subsystem.
Therefore this is limited to what the qemu input subsystem and the
emulated input devices are able to handle. Also there is no support for
absolute coordinates (tablet/touchscreen). So we are talking here about
basic mouse and keyboard support.
The advantage is that it'll work without virtio-input drivers in the
guest, the events are delivered to the usual ps/2 or usb input devices
(depending on what the machine happens to have). And for keyboards
qemu is able to switch the keyboard between guest and host on hotkey.
The hotkey is hard-coded for now (both control keys), initialy the
guest owns the keyboard.
Probably most useful when assigning vga devices with vfio and using a
physical monitor instead of vnc/spice/gtk as guest display.
Usage: Add '-input-linux /dev/input/event<nr>' to the qemu command
line. Note that udev has rules which populate /dev/input/by-{id,path}
with static names, which might be more convinient to use.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 1457087116-4379-2-git-send-email-kraxel@redhat.com
With this property, users can control if this filter is 'on'
or 'off'. The default behavior for filter is 'on'.
For some types of filters, they may need to react to status changing,
So here, we introduced status changing callback/notifier for filter class.
We will skip the disabled ('off') filter when delivering packets in net layer.
Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Yang Hongyang <hongyang.yang@easystack.cn>
Signed-off-by: Jason Wang <jasowang@redhat.com>
icount sleep takes on or off as options. A few places mention sleep=no
which is not accepted. This patch corrects them.
Signed-off-by: Pranith Kumar <bobby.prani@gmail.com>
Message-Id: <1456499811-16819-1-git-send-email-bobby.prani@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Migration of pseries-2.3 doesn't have configuration section. Unfortunately,
QEMU 2.4/2.4.1/2.5 are buggy and always stream and expect the configuration
section, and break migration both ways.
This patch introduces a property which allows to enforce a configuration
section for machines who don't have one.
It can be set at startup:
-machine enforce-config-section=on
or later from the QEMU monitor:
qom-set /machine enforce-config-section on
It is up to the tooling to set or unset this property according to the
version of the QEMU at the other end of the pipe.
Signed-off-by: Greg Kurz <gkurz@linux.vnet.ibm.com>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This adds support for dma-buf passing to spice. This makes virtio-gpu
with 3d acceleration work with spice.
Workflow:
* virglrenderer renders the guest command stream into a texture.
* qemu exports the texture as dma-buf and passes on that dma-buf
to spice-server.
* spice-server passes the dma-buf to spice-client, using unix
socket file descriptor passing.
* spice-client asks the window systems composer to render the
dma-buf to the screen.
Requires cutting edge spice (server) and spice-gtk (client) builds,
from git master branch.
Also requires libvirt managing your qemu instance, and using
"virt-viewer --attach $guest". libvirt will connect spice-server and
spice-client using unix sockets instead of tcp sockets then, which
is required for file descriptor passing.
Works for the local case (spice server and client on the same machine)
only. Supporting remote too is planned (by feeding the dma-bufs into
gpu-assisted video encoder), but not there yet.
gl mode is turned off by default, use "-spice gl=on,$otherargs" to
enable it.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The current documentation of chardev mux=on is rather brief and opaque;
expand it to hopefully be a bit more helpful.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <1455643738-6068-1-git-send-email-peter.maydell@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Eduardo Habkost
Vincent Palatin
Paolo Bonzini
Prasanna Kumar Kalever
Max Reitz
Stefan Hajnoczi
Gonglei
Marc-André Lureau
Michael Tokarev
Changlong Xie
Alexey Kardashevskiy
Zhang Chen
Peter Maydell
Lin Ma
Colin Lord
Samuel Thibault
Li Zhijian
Robert Ho
Jason Wang
Marcel Apfelbaum
Denis V. Lunev
Daniel P. Berrange
Richard W.M. Jones
Gerd Hoffmann
Markus Armbruster
Alex Bennée
Yann Bordenave
zhanghailiang
Pranith Kumar
Greg Kurz