Commit 7e46261368 converted virtfs-proxy-helper to using libcap-ng. There
aren't any users of libcap anymore. No need to install libcap-dev.
Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Alex Bennée <alex.bennee@linaro.org>
It's broken so it's no longer helping. The latest Xcode is covered by
Cirrus.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20191127132430.3681-1-alex.bennee@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The older clangs are still struggling to build and run everything
withing the 50 minute timeout so lets lighten the load a bit more. We
still have coverage for GCC and hopefully no obscure 32 bit guest only
breakages slip through the cracks.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Let's challenge the convention that doing more at a time helps. It
certainly doesn't tell you unambiguously where in the test cycle you
were before the test hangs and exceeds the job time limit.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
- use --enable-plugins @ configure
- low impact introspection (-plugin empty.so to measure overhead)
- plugins cannot alter guest state
- example plugins included in source tree (tests/plugins)
- -d plugin to enable plugin output in logs
- check-tcg runs extra tests when plugins enabled
- documentation in docs/devel/plugins.rst
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEZoWumedRZ7yvyN81+9DbCVqeKkQFAl23BZMACgkQ+9DbCVqe
KkRPegf/QHygZ4ER2jOaWEookxiOEcik+dzQKVGNqLNXeMLvo5fGjGVpFoFxSgfv
ZvCAL4xbW44zsYlVfh59tfn4Tu9qK7s7/qM3WXpHsmuvEuhoWef0Lt2jSe+D46Rs
KeG/aX+rHLUR8rr9eCgE+1/MQmxPUj3VUonkUpNkk2ebBbSNoLSOudB4DD9Vcyl7
Pya1kPvA6W9bwI20ZSWihE7flg13o62Pp+LgAFLrsfxXOxOMkPrU8Pp+B0Dvr+hL
5Oh0clZLhiRi75x+KVGZ90TVsoftdjYoOWGMOudS/+NNmqKT1NTLm0K1WJYyRMQ1
V0ne4/OcGNq7x8gcOx/xs09ADu5/VA==
=UXR/
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/stsquad/tags/pull-tcg-plugins-281019-4' into staging
TCG Plugins initial implementation
- use --enable-plugins @ configure
- low impact introspection (-plugin empty.so to measure overhead)
- plugins cannot alter guest state
- example plugins included in source tree (tests/plugins)
- -d plugin to enable plugin output in logs
- check-tcg runs extra tests when plugins enabled
- documentation in docs/devel/plugins.rst
# gpg: Signature made Mon 28 Oct 2019 15:13:23 GMT
# gpg: using RSA key 6685AE99E75167BCAFC8DF35FBD0DB095A9E2A44
# gpg: Good signature from "Alex Bennée (Master Work Key) <alex.bennee@linaro.org>" [full]
# Primary key fingerprint: 6685 AE99 E751 67BC AFC8 DF35 FBD0 DB09 5A9E 2A44
* remotes/stsquad/tags/pull-tcg-plugins-281019-4: (57 commits)
travis.yml: enable linux-gcc-debug-tcg cache
MAINTAINERS: add me for the TCG plugins code
scripts/checkpatch.pl: don't complain about (foo, /* empty */)
.travis.yml: add --enable-plugins tests
include/exec: wrap cpu_ldst.h in CONFIG_TCG
accel/stubs: reduce headers from tcg-stub
tests/plugin: add hotpages to analyse memory access patterns
tests/plugin: add instruction execution breakdown
tests/plugin: add a hotblocks plugin
tests/tcg: enable plugin testing
tests/tcg: drop test-i386-fprem from TESTS when not SLOW
tests/tcg: move "virtual" tests to EXTRA_TESTS
tests/tcg: set QEMU_OPTS for all cris runs
tests/tcg/Makefile.target: fix path to config-host.mak
tests/plugin: add sample plugins
linux-user: support -plugin option
vl: support -plugin option
plugin: add qemu_plugin_outs helper
plugin: add qemu_plugin_insn_disas helper
plugin: expand the plugin_init function to include an info block
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20191028073441.6448-18-philmd@redhat.com>
Reviewed-by: Cleber Rosa <crosa@redhat.com>
Tested-by: Cleber Rosa <crosa@redhat.com>
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20191028073441.6448-13-philmd@redhat.com>
Reviewed-by: Cleber Rosa <crosa@redhat.com>
Tested-by: Cleber Rosa <crosa@redhat.com>
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Create a new cache for the --enable-debug-tcg builds which is separate
from the normal debug builds which generate different code. We also
enable debug-tcg for the new plugins based builds as we want to ensure
any breakage to TCG is picked up by the sanity checks.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
check-tcg will automatically run the plugins against most TCG tests if
it is enabled in the build. We exclude sparc64-linux-user for now as
there are pending patches that need to be merged fixing it's fork
implementation.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
This adds a whole bunch of asserts which will catch bugs you might
introduce into the TCG code.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Hopefully we'll see the same benefits as the other builds.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
According to:
https://docs.travis-ci.com/user/reference/osx/#macos-version
we have 10.3 available so lets use it. I don't know what Apple's
deprecation policy is for Xcode because it requires an AppleID to find
out.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Add a job to generate the release tarball and build/install few
QEMU targets from it.
Ideally we should build the 'efi' target from the 'roms' directory,
but it is too time consuming.
This job is only triggered when a tag starting with 'v' is pushed,
which is the case with release candidate tags.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20191007160450.3619-1-philmd@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
The "command -v ccache && ccache ..." likely were supposed to test
the availability of ccache before running the program. But this
shell construct causes Travis to abort if ccache is not available.
Use an if-statement instead to fix this problem.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20191009170701.14756-5-thuth@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
libgnutls-dev and libpng12-dev are not available in newer versions
of Ubuntu anymore, so installing these packages fails e.g. in the
new arm64 containers on Travis. Let's use newer versions of these
packages by default instead. (The old versions still get tested in
the "gcc-9" build).
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20191009170701.14756-4-thuth@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
We've removed support for SDL 1.2 quite a while ago already, so let's
use SDL 2 now in Travis to get test coverage for SDL again.
And while we're at it, also add libsdl2-image-dev which can be used
by QEMU nowadays, too.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20191009170701.14756-3-thuth@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
This library is needed to compile the VDE network backend.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20191009170701.14756-2-thuth@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Adding debug makes things run a bit slower so lets not hammer all the
targets.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
So far we were not testing virtio-9p in Travis yet, since we forgot to
install libcap-devel. Do it now to get some more test coverage.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Acked-by: Greg Kurz <groug@kaod.org>
Tested-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190905113346.2473-1-thuth@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
These jobs build different components but use the same
host features. Put them in the same cache bucket.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
These jobs build different components but use the same
host features. Put them in the same cache bucket.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
These jobs build different components but use the same
host features. Put them in the same cache bucket.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
We will set the CACHE_NAME variable to improve the caching
of various jobs using the same characteristics. Document it
first.
See https://docs.travis-ci.com/user/caching/#caches-and-build-matrices
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
By default, ccache is not installed on macOS environments.
See https://docs.travis-ci.com/user/caching/#ccache-on-macos
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Per https://ccache.dev/manual/latest.html:
By default, ccache tries to give as few false cache hits as
possible. However, in certain situations it’s possible that
you know things that ccache can’t take for granted.
[The CCACHE_SLOPINESS environment variable] makes it possible
to tell ccache to relax some checks in order to increase the
hit rate.
We can relax the ctime/mtime header checks:
- include_file_ctime
By default, ccache also will not cache a file if it
includes a header whose ctime is too new. This option
disables that check.
- include_file_mtime
By default, ccache will not cache a file if it includes
a header whose mtime is too new. This option disables
that check.
We also add a call to clear the cache statistics before running
the build, and display them when the build finishes.
See https://docs.travis-ci.com/user/caching/#ccache-cache
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Avocado tests download artifacts from various sources.
These sources sometime have network issues resulting in build
failures. Cache Avocado cache to reduce build failure.
See https://docs.travis-ci.com/user/caching/#arbitrary-directories
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
We always install the same packages ever and ever, cache them.
See https://docs.travis-ci.com/user/caching/#pip-cache
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
We are going to cache few gigabytes, increase the cache timeout
to avoid build failures when uploading our cache.
See https://docs.travis-ci.com/user/caching/#setting-the-timeout
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Using the 'multiple caching features' means explode the YAML array,
thus it eases the git workflow (it is easier to move patches around).
See https://docs.travis-ci.com/user/caching#enabling-multiple-caching-features
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20170809202712.6951-4-f4bug@amsat.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Just like the previous tests, boots a Linux kernel on a ppc64 target
using the pseries machine.
Signed-off-by: Cleber Rosa <crosa@redhat.com>
CC: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Message-Id: <20190607152223.9467-5-crosa@redhat.com>
Signed-off-by: Cleber Rosa <crosa@redhat.com>
We have some flaky tests and usually the test passes on a retry.
Enable travis_retry for the test phase and see if that helps keep
things green.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
It looks like the Travis image package databases are out of date
causing the build to error with:
Error: Your Homebrew is outdated. Please run `brew update`.
Error: Kernel.exit
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
It's fairly common to build qemu-user binaries with --static linking
so the binary can be copied around without libraries. Enable --static
in the default qemu-user build to cover this.
There are other qemu-user builds that use dynamic linking so they
should catch any problems there.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Rewrite the implementation of the ssh block driver to use libssh instead
of libssh2. The libssh library has various advantages over libssh2:
- easier API for authentication (for example for using ssh-agent)
- easier API for known_hosts handling
- supports newer types of keys in known_hosts
Use APIs/features available in libssh 0.8 conditionally, to support
older versions (which are not recommended though).
Adjust the iotest 207 according to the different error message, and to
find the default key type for localhost (to properly compare the
fingerprint with).
Contributed-by: Max Reitz <mreitz@redhat.com>
Adjust the various Docker/Travis scripts to use libssh when available
instead of libssh2. The mingw/mxe testing is dropped for now, as there
are no packages for it.
Signed-off-by: Pino Toscano <ptoscano@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20190620200840.17655-1-ptoscano@redhat.com
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 5873173.t2JhDm7DL7@lindworm.usersys.redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Because Travis doesn't allow us to keep files produced during tests
(such as log files), let's print the complete job log to the "console"
in case of job failures.
This is a debugging aid, and given that there's been some timeouts
happening on some tests, we absolutely needs the logs to have a proper
action.
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Message-Id: <20190607152223.9467-2-crosa@redhat.com>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Acked-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
This reverts commit 6d7a134da4.
We'll have a better fix, that will show the full avocado job log
only if a test case failed.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
We document this on our wiki and we might as well catch it in our CI
rather than waiting for it to be picked up on merge:
https://wiki.qemu.org/Testing#clang_UBSan
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
The toolchain PPA has it so we might as well use it. We currently have
to add:
-Wno-error=stringop-truncation
as there are still strncpy operations in the tree operating on things
that haven't been annotated with QEMU_NONSTRING.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
We are going to enable the qemu-iotests during "make check" again,
and for running the iotests, we need bash and gnu-sed.
Reviewed-by: Li-Wen Hsu <lwhsu@freebsd.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Message-Id: <20190502084506.8009-5-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Similar to the x86_64 + pc test, it boots a Linux kernel on a Malta
board and verify the serial is working. One extra command added to
the QEMU command line is '-vga std', because the kernel used is
known to crash without it.
If alpha is a target being built, "make check-acceptance" will
automatically include this test by the use of the "arch:alpha" tags.
Alternatively, this test can be run using:
$ avocado run -t arch:alpha tests/acceptance
$ avocado run -t machine:clipper tests/acceptance
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Reviewed-by: Caio Carrara <ccarrara@redhat.com>
Message-Id: <20190312171824.5134-21-crosa@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Just like the previous tests, boots a Linux kernel on a s390x target
using the s390-ccw-virtio machine.
Because it's not possible to have multiple VT220 consoles,
'-nodefaults' is used, so that the one set with set_console() works
correctly.
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Caio Carrara <ccarrara@redhat.com>
Message-Id: <20190312171824.5134-20-crosa@redhat.com>
[ehabkost: Updated kernel URL to point to fedoraproject.org]
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Just like the previous tests, boots a Linux kernel on an arm target
using the virt machine.
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Reviewed-by: Caio Carrara <ccarrara@redhat.com>
Message-Id: <20190312171824.5134-19-crosa@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Just like the previous tests, boots a Linux kernel on a aarch64 target
using the virt machine.
One special option added is the CPU type, given that the kernel
selected fails to boot on the virt machine's default CPU (cortex-a15).
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Reviewed-by: Caio Carrara <ccarrara@redhat.com>
Message-Id: <20190312171824.5134-18-crosa@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Similar to the x86_64 + pc test, it boots a Linux kernel on a Malta
board and verify the serial is working.
If mips64el is a target being built, "make check-acceptance" will
automatically include this test by the use of the "arch:mips64el"
tags.
Alternatively, this test can be run using:
$ avocado run -t arch:mips64el tests/acceptance
$ avocado run -t machine:malta tests/acceptance
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Message-Id: <20190312171824.5134-15-crosa@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Similar to the x86_64 + pc test, it boots a Linux kernel on a Malta
board and verify the serial is working. Also, it relies on the serial
device set by the machine itself.
If mips is a target being built, "make check-acceptance" will
automatically include this test by the use of the "arch:mips" tags.
Alternatively, this test can be run using:
$ avocado run -t arch:mips tests/acceptance
$ avocado run -t machine:malta tests/acceptance
$ avocado run -t endian:big tests/acceptance
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190312171824.5134-14-crosa@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
The current version of the "check-acceptance" target will only show
one line for execution of all tests. That's probably OK if the tests
to be run are quick enough and they're always the same.
But, there's already one test alone that takes on average ~5 seconds
to run, we intend to adapt the list of tests to match the user's build
environment (among other choices).
Because of that, let's present the default Avocado UI by default.
Users can always choose a different output by setting the AVOCADO_SHOW
variable.
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Reviewed-by: Caio Carrara <ccarrara@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <20190312171824.5134-2-crosa@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
This build keeps timing out on Travis and it's unlikely including the
additional guest front-ends will catch any failures in the fallback
code.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Acked-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
