Since everything else about the nbd-server-* QMP commands is
accessible from HMP, we might as well make removing an export
available as well. For now, I went with a bool flag rather
than a mode string for choosing between safe (default) and
hard modes.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20180125144557.25502-1-eblake@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
HMP equivalent to the just added migrate-continue
Unpause a migrate paused at a given state.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Add 'info memory_size_summary' command which is a sibling
of QMP command query-memory-size-summary. It provides the
following memory information in bytes:
* base-memory - size of "base" memory specified with command line option -m.
* plugged-memory - amount of memory that was hot-plugged.
If target does not have CONFIG_MEM_HOTPLUG enabled, no
value is reported.
Signed-off-by: Vasilis Liaskovitis <vasilis.liaskovitis@profitbricks.com>
Signed-off-by: Mohammed Gamal <mohammed.gamal@profitbricks.com>
Signed-off-by: Eduardo Otubo <eduardo.otubo@profitbricks.com>
Signed-off-by: Vadim Galitsyn <vadim.galitsyn@profitbricks.com>
Reviewed-by: Eugene Crosser <evgenii.cherkashin@profitbricks.com>
Cc: Dr. David Alan Gilbert <dgilbert@redhat.com>
Cc: Markus Armbruster <armbru@redhat.com>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Eric Blake <eblake@redhat.com>
Cc: qemu-devel@nongnu.org
Message-Id: <20170829153022.27004-4-vadim.galitsyn@profitbricks.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Fixed up comments from Igor's review
Signed-off-by: Anton Nefedov <anton.nefedov@virtuozzo.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Acked-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <1499342940-56739-11-git-send-email-anton.nefedov@virtuozzo.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Sending a break on a serial console can be useful for debugging the
guest. But not all chardev backends support sending breaks (only telnet
and mux do). The chardev-send-break command allows to send a break even
if using other backends.
Signed-off-by: Stefan Fritsch <sf@sfritsch.de>
Acked-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20170611074817.13621-1-sf@sfritsch.de>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Use 'send a break' in all 3 pieces of text as suggested by eblake
To dump information about ramblocks. It looks like:
(qemu) info ramblock
Block Name PSize Offset Used Total
/objects/mem 2 MiB 0x0000000000000000 0x0000000080000000 0x0000000080000000
vga.vram 4 KiB 0x0000000080060000 0x0000000001000000 0x0000000001000000
/rom@etc/acpi/tables 4 KiB 0x00000000810b0000 0x0000000000020000 0x0000000000200000
pc.bios 4 KiB 0x0000000080000000 0x0000000000040000 0x0000000000040000
0000:00:03.0/e1000.rom 4 KiB 0x0000000081070000 0x0000000000040000 0x0000000000040000
pc.rom 4 KiB 0x0000000080040000 0x0000000000020000 0x0000000000020000
0000:00:02.0/vga.rom 4 KiB 0x0000000081060000 0x0000000000010000 0x0000000000010000
/rom@etc/table-loader 4 KiB 0x00000000812b0000 0x0000000000001000 0x0000000000001000
/rom@etc/acpi/rsdp 4 KiB 0x00000000812b1000 0x0000000000001000 0x0000000000001000
Ramblock is something hidden internally in QEMU implementation, and this
command should only be used by mostly QEMU developers on RAM stuff. It
is not a command suitable for QMP interface. So only HMP interface is
provided for it.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <1494562661-9063-4-git-send-email-peterx@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
It only uses block/* functions, nothing from migration.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
It really uses block/* stuff, not migration one.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
It is a monitor command, and has nothing migration specific in it.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
We are going to move the rest of hmp snapshots functions there instead
of monitor.c.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
We leave users to choose whatever heartbeat solution they want,
if the heartbeat is lost, or other errors they detect, they can use
experimental command 'x_colo_lost_heartbeat' to tell COLO to do failover,
COLO will do operations accordingly.
For example, if the command is sent to the Primary side,
the Primary side will exit COLO mode, does cleanup work,
and then, PVM will take over the service work. If sent to the Secondary side,
the Secondary side will run failover work, then takes over PVM's service work.
Cc: Luiz Capitulino <lcapitulino@redhat.com>
Cc: Eric Blake <eblake@redhat.com>
Cc: Markus Armbruster <armbru@redhat.com>
Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Amit Shah <amit@amitshah.net>
Homogenizes the command capabilities with QMP.
Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This is the HMP equivalent for QMP query-hotpluggable-cpus.
Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
[dwg: Fixed problem with printf formats on 32-bit host]
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
It will calculate percentage of finished work from completed and
total.
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <1455772616-8668-11-git-send-email-peterx@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Once postcopy is enabled (with migrate_set_capability), the migration
will still start on precopy mode. To cause a transition into postcopy
the:
migrate_start_postcopy
command must be issued. Postcopy will start sometime after this
(when it's next checked in the migration loop).
Issuing the command before migration has started will error,
and issuing after it has finished is ignored.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Make "info iothreads" available on the HMP monitor.
For example, the results are as follows when executing qemu
command with "-object iothread,id=iothread-1 -object
iothread,id=iothread-2".
(qemu) info iothreads
iothread-1: thread_id=123
iothread-2: thread_id=456
Signed-off-by: Ting Wang <kathy.wangting@huawei.com>
Message-Id: <1435306033-58372-1-git-send-email-kathy.wangting@huawei.com>
Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
Reviewed-by: Amos Jianjun Kong <kongjianjun@gmail.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Add completion for the trace event names in the hmp trace-event
command.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-id: 1439548063-18410-1-git-send-email-dgilbert@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
All QMP commands use the "new" handler interface (mhandler.cmd_new).
Most HMP commands still use the traditional interface (mhandler.cmd),
but a few use the "new" one. Complicates handle_user_command() for no
gain, so I'm converting these to the traditional interface.
For device_add, that's easy: just wrap the obvious hmp_device_add()
around do_device_add().
monitor_user_noop() is now unused, drop it.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
Add the hmp interface to tune and query the parameters used in
live migration.
Signed-off-by: Liang Li <liang.z.li@intel.com>
Signed-off-by: Yang Zhang <yang.z.zhang@intel.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
The functions ringbuf_read_completion() and monitor_get_rs()
are not used anywhere anymore, so let's remove them.
Signed-off-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Cc: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Re-implemented based on qmp_qom_set() to facilitate argument parsing.
Warn about ambiguous path arguments.
Reviewed-by: Gonglei <arei.gonglei@huawei.com>
Tested-by: Alistair Francis <alistair.francis@xilinx.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Implement it as a wrapper for QMP qom-list, but mimic the behavior of
scripts/qmp/qom-list in making the path argument optional and listing
the root if absent, to hint users what kind of path to pass.
Reviewed-by: Gonglei <arei.gonglei@huawei.com>
Tested-by: Alistair Francis <alistair.francis@xilinx.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Add migrate_incoming/migrate-incoming to start an incoming
migration.
Once a qemu has been started with
-incoming defer
the migration can be started by issuing:
migrate_incoming uri
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Some are called do_COMMAND() (old ones, usually), some hmp_COMMAND(),
and sometimes COMMAND pointlessly differs in spelling.
Normalize to hmp_COMMAND(), where COMMAND is exactly the command name
with '-' replaced by '_'.
Exceptions:
* do_device_add() and client_migrate_info() *not* renamed to
hmp_device_add(), hmp_client_migrate_info(), because they're also
QMP handlers. They still need to be converted to QAPI.
* do_memory_dump(), do_physical_memory_dump(), do_ioport_read(),
do_ioport_write() renamed do hmp_* instead of hmp_x(), hmp_xp(),
hmp_i(), hmp_o(), because those names are too cryptic for my taste.
* do_info_help() renamed to hmp_info_help() instead of hmp_info(),
because it only covers help.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
This is the hmp counterpart of qmp query-memdev.
Signed-off-by: Hu Tao <hutao@cn.fujitsu.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
MST: fix build on 32 bit
Relies on readline unique completion strings patch to make the added vlan/hub
completion values unique, instead of using something like a hash table.
Signed-off-by: Hani Benhabiles <hani@linux.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Export chr_is_ringbuf() function. Also remove left-over function prototypes
while at it.
Signed-off-by: Hani Benhabiles <hani@linux.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Make it possible to query all net clients without specifying an ID when calling
qemu_find_net_clients_except().
This also adds the add_completion_option() function which is to be used for
other commands completions as well.
Signed-off-by: Hani Benhabiles <hani@linux.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Convert object_add and object_del commands to use the new callback.
Signed-off-by: Hani Benhabiles <hani@linux.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Add two commands that are the monitor counterparts of -object. The commands
have the same Visitor-based implementation, but use different kinds of
visitors so that the HMP command has a DWIM string-based syntax, while
the QMP variant accepts a stricter JSON-based properties dictionary.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Tested-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
These two commands invoke the "unparent" method of Object.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Tested-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Add HMP cpu-add wrapper to allow cpu hot plugging via monitor.
Signed-off-by: Jason J. Herne <jjherne@us.ibm.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
It is hard to make both id and name optional in hmp console as qmp
interface, so this interface require user to specify name.
Signed-off-by: Wenchao Xia <xiawenc@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Make "drive_backup" available on the HMP monitor:
drive_backup [-n] [-f] device target [format]
The -n flag requests QEMU to reuse the image found in new-image-file,
instead of recreating it from scratch.
The -f flag requests QEMU to copy the whole disk, so that the result
does not need a backing file. Note that this flag *must* currently be
passed since the other sync modes ('none' and 'top') have not been
implemented yet. Requiring it ensures that "drive_backup" behaves like
"drive_mirror".
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
