Commit Graph

10 Commits

Author SHA1 Message Date
Dmitry Fleytman 605d52e62f net_pkt: Name vmxnet3 packet abstractions more generic
This patch drops "vmx" prefix from packet abstractions names
to emphasize the fact they are generic and not tied to any
specific network device.

These abstractions will be reused by e1000e emulation implementation
introduced by following patches so their names need generalization.

This patch (except renamed files, adjusted comments and changes in MAINTAINTERS)
was produced by:

git grep -lz 'vmxnet_tx_pkt' | xargs -0 perl -i'' -pE "s/vmxnet_tx_pkt/net_tx_pkt/g"
git grep -lz 'vmxnet_rx_pkt' | xargs -0 perl -i'' -pE "s/vmxnet_rx_pkt/net_rx_pkt/g"
git grep -lz 'VmxnetTxPkt' | xargs -0 perl -i'' -pE "s/VmxnetTxPkt/NetTxPkt/g"
git grep -lz 'VMXNET_TX_PKT' | xargs -0 perl -i'' -pE "s/VMXNET_TX_PKT/NET_TX_PKT/g"
git grep -lz 'VmxnetRxPkt' | xargs -0 perl -i'' -pE "s/VmxnetRxPkt/NetRxPkt/g"
git grep -lz 'VMXNET_RX_PKT' | xargs -0 perl -i'' -pE "s/VMXNET_RX_PKT/NET_RX_PKT/g"
sed -ie 's/VMXNET_/NET_/g' hw/net/vmxnet_rx_pkt.c
sed -ie 's/VMXNET_/NET_/g' hw/net/vmxnet_tx_pkt.c

Signed-off-by: Dmitry Fleytman <dmitry.fleytman@ravellosystems.com>
Signed-off-by: Leonid Bloch <leonid.bloch@ravellosystems.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
2016-06-02 10:42:27 +08:00
Jean-Christophe Dubois fcbd8018e6 i.MX: Add FEC Ethernet Emulator
This is based on mcf_fec.c FEC implementation for Coldfire

  * A generic PHY was added (borrowwed from LAN9118)
  * The buffer management is also modified as buffers are
    slightly different between Coldfire and i.MX

Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Message-id: fb314f8a120aa49f8f6ad886f312c649b484fb5a.1441057361.git.jcd@tribudubois.net
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-09-07 10:39:30 +01:00
Scott Feldman fafa4d508b qmp/hmp: add rocker device support
Add QMP/HMP support for rocker devices.  This is mostly for debugging purposes
to see inside the device's tables and port configurations.  Some examples:

(qemu) info rocker sw1
name: sw1
id: 0x0000013512005452
ports: 4

(qemu) info rocker-ports sw1
            ena/    speed/ auto
      port  link    duplex neg?
     sw1.1  up     10G  FD  No
     sw1.2  up     10G  FD  No
     sw1.3  !ena   10G  FD  No
     sw1.4  !ena   10G  FD  No

(qemu) info rocker-of-dpa-flows sw1
prio tbl hits key(mask) --> actions
2    60       pport 1 vlan 1 LLDP src 00:02:00:00:02:00 dst 01:80:c2:00:00:0e
2    60       pport 1 vlan 1 ARP src 00:02:00:00:02:00 dst 00:02:00:00:03:00
2    60       pport 2 vlan 2 IPv6 src 00:02:00:00:03:00 dst 33:33:ff:00:00:02 proto 58
3    50       vlan 2 dst 33:33:ff:00:00:02 --> write group 0x32000001 goto tbl 60
2    60       pport 2 vlan 2 IPv6 src 00:02:00:00:03:00 dst 33:33:ff:00:03:00 proto 58
3    50  1    vlan 2 dst 33:33:ff:00:03:00 --> write group 0x32000001 goto tbl 60
2    60       pport 2 vlan 2 ARP src 00:02:00:00:03:00 dst 00:02:00:00:02:00
3    50  2    vlan 2 dst 00:02:00:00:02:00 --> write group 0x02000001 goto tbl 60
2    60  1    pport 2 vlan 2 IP src 00:02:00:00:03:00 dst 00:02:00:00:02:00 proto 1
3    50  2    vlan 1 dst 00:02:00:00:03:00 --> write group 0x01000002 goto tbl 60
2    60  1    pport 1 vlan 1 IP src 00:02:00:00:02:00 dst 00:02:00:00:03:00 proto 1
2    60       pport 1 vlan 1 IPv6 src 00:02:00:00:02:00 dst 33:33:ff:00:00:01 proto 58
3    50       vlan 1 dst 33:33:ff:00:00:01 --> write group 0x31000000 goto tbl 60
2    60       pport 1 vlan 1 IPv6 src 00:02:00:00:02:00 dst 33:33:ff:00:02:00 proto 58
3    50  1    vlan 1 dst 33:33:ff:00:02:00 --> write group 0x31000000 goto tbl 60
1    60  173  pport 2 vlan 2 LLDP src <any> dst 01:80:c2:00:00:0e --> write group 0x02000000
1    60  6    pport 2 vlan 2 IPv6 src <any> dst <any> --> write group 0x02000000
1    60  174  pport 1 vlan 1 LLDP src <any> dst 01:80:c2:00:00:0e --> write group 0x01000000
1    60  174  pport 2 vlan 2 IP src <any> dst <any> --> write group 0x02000000
1    60  6    pport 1 vlan 1 IPv6 src <any> dst <any> --> write group 0x01000000
1    60  181  pport 2 vlan 2 ARP src <any> dst <any> --> write group 0x02000000
1    10  715  pport 2 --> apply new vlan 2 goto tbl 20
1    60  177  pport 1 vlan 1 ARP src <any> dst <any> --> write group 0x01000000
1    60  174  pport 1 vlan 1 IP src <any> dst <any> --> write group 0x01000000
1    10  717  pport 1 --> apply new vlan 1 goto tbl 20
1    0   1432 pport 0(0xffff) --> goto tbl 10

(qemu) info rocker-of-dpa-groups sw1
id (decode) --> buckets
0x32000001 (type L2 multicast vlan 2 index 1) --> groups [0x02000001,0x02000000]
0x02000001 (type L2 interface vlan 2 pport 1) --> pop vlan out pport 1
0x01000002 (type L2 interface vlan 1 pport 2) --> pop vlan out pport 2
0x02000000 (type L2 interface vlan 2 pport 0) --> pop vlan out pport 0
0x01000000 (type L2 interface vlan 1 pport 0) --> pop vlan out pport 0
0x31000000 (type L2 multicast vlan 1 index 0) --> groups [0x01000002,0x01000000]

[Added "query-" prefixes to rocker.json commands as suggested by Eric
Blake <eblake@redhat.com>.
--Stefan]

Signed-off-by: Scott Feldman <sfeldma@gmail.com>
Signed-off-by: Jiri Pirko <jiri@resnulli.us>
Message-id: 1433985681-56138-5-git-send-email-sfeldma@gmail.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-06-12 13:42:17 +01:00
Scott Feldman dc488f8880 rocker: add new rocker switch device
Rocker is a simulated ethernet switch device.  The device supports up to 62
front-panel ports and supports L2 switching and L3 routing functions, as well
as L2/L3/L4 ACLs.  The device presents a single PCI device for each switch,
with a memory-mapped register space for device driver access.

Rocker device is invoked with -device, for example a 4-port switch:

  -device rocker,name=sw1,len-ports=4,ports[0]=dev0,ports[1]=dev1, \
         ports[2]=dev2,ports[3]=dev3

Each port is a netdev and can be paired with using -netdev id=<port name>.

Signed-off-by: Scott Feldman <sfeldma@gmail.com>
Signed-off-by: Jiri Pirko <jiri@resnulli.us>
Acked-by: Scott Feldman <sfeldma@gmail.com>
Acked-by: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: David Ahern <dsahern@gmail.com>
Message-id: 1426306173-24884-7-git-send-email-sfeldma@gmail.com

rocker: fix clang compiler errors

Consolidate all forward typedef declarations to rocker.h.

Signed-off-by: David Ahern <dsahern@gmail.com>
Acked-by: Scott Feldman <sfeldma@gmail.com>
Acked-by: Jiri Pirko <jiri@resnulli.us>

rocker: add support for flow modification

We had support for flow add/del.  This adds support for flow mod.  I needed
this for L3 support where an existing route is modified using NLM_F_REPLACE.
For example:

  ip route add 12.0.0.0/30 nexthop via 11.0.0.1 dev swp1
  ip route change 12.0.0.0/30 nexthop via 11.0.0.9 dev swp2

The first cmd adds the route.  The second cmd changes the existing route by
changing its nexthop info.

In the device, a mod operation results in the matching flow enty being modified
with the new settings.  This is atomic to the device.

Signed-off-by: Scott Feldman <sfeldma@gmail.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-05-11 14:49:04 +01:00
Fabien Chouteau eb1e7c3e51 Add Enhanced Three-Speed Ethernet Controller (eTSEC)
This implementation doesn't include ring priority, TCP/IP Off-Load, QoS.

Signed-off-by: Fabien Chouteau <chouteau@adacore.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
2014-03-05 03:06:45 +01:00
Beniamino Galvani 22f90bcb2b hw/net: add support for Allwinner EMAC Fast Ethernet controller
This patch adds support for the Fast Ethernet MAC found on Allwinner
SoCs, together with a basic emulation of Realtek RTL8201CP PHY.

Since there is no public documentation of the Allwinner controller, the
implementation is based on Linux kernel driver.

Signed-off-by: Beniamino Galvani <b.galvani@gmail.com>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-02-08 14:50:48 +00:00
Paolo Bonzini d7e35d4a84 hw: move NICs to hw/net/, configure via default-configs/
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-04-08 18:13:13 +02:00
Paolo Bonzini 6e7907468f hw: move virtio devices to hw/ subdirectories
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-04-08 18:13:12 +02:00
Paolo Bonzini 49ab747f66 hw: move target-independent files to subdirectories
This patch tackles all files that are compiled once, moving
them to subdirectories of hw/.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-04-08 18:13:12 +02:00
Paolo Bonzini 1fd6bb44ed hw: make subdirectories for devices
Prepare the new directory structure.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-04-08 18:13:11 +02:00