backend_defaults property allow users to control if default block
properties should be decided with backend information.
If it is off, any backend information will be discarded, which is
suitable if you plan to perform live migration to a different disk backend.
If it is on, a block device may utilize backend information more
aggressively.
By default, it is auto, which uses backend information for block
sizes and ignores the others, which is consistent with the older
versions.
Signed-off-by: Akihiko Odaki <akihiko.odaki@gmail.com>
Message-id: 20210705130458.97642-2-akihiko.odaki@gmail.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The device model batching its ioeventfds in a single MR transaction is
an optimization. Clarify this in virtio-scsi, virtio-blk and generic
virtio code. Also clarify that the transaction must commit before
closing ioeventfds so that no one is tempted to merge the loops
in the start functions error path and in the stop functions.
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <162125799728.1394228.339855768563326832.stgit@bahia.lan>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Commit dabefdd6 removed code that was supposed to try reconnecting
during .realize(), but actually just crashed and had several design
problems.
This adds the feature back without the crash in simple cases while also
fixing some design problems: Reconnection is now only tried if there was
a problem with the connection and not an error related to the content
(which would fail again the same way in the next attempt). Reconnection
is limited to three attempts (four with the initial attempt) so that we
won't end up in an infinite loop if a problem is permanent. If the
backend restarts three times in the very short time window of device
initialisation, we have bigger problems and erroring out is the right
course of action.
In the case that a connection error occurs and we reconnect, the error
message is printed using error_report_err(), but otherwise ignored.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20210609154658.350308-8-kwolf@redhat.com>
Reviewed-by: Raphael Norwitz <raphael.norwitz@nutanix.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This function is the part that we will want to retry if the connection
is lost during initialisation, so factor it out to keep the following
patch simpler.
The error path for vhost_dev_get_config() forgot disconnecting the
chardev, add this while touching the code.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20210609154658.350308-7-kwolf@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Raphael Norwitz <raphael.norwitz@nutanix.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Instead of just returning 0/-1 and letting the caller make up a
meaningless error message, add an Error parameter to allow reporting the
real error and switch to 0/-errno so that different kind of errors can
be distinguished in the caller.
config_len in vhost_user_get_config() is defined by the device, so if
it's larger than VHOST_USER_MAX_CONFIG_SIZE, this is a programming
error. Turn the corresponding check into an assertion.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20210609154658.350308-6-kwolf@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Raphael Norwitz <raphael.norwitz@nutanix.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Instead of letting the caller make up a meaningless error message, add
an Error parameter to allow reporting the real error.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20210609154658.350308-5-kwolf@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Raphael Norwitz <raphael.norwitz@nutanix.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This allows callers to return better error messages instead of making
one up while the real error ends up on stderr. Most callers can
immediately make use of this because they already have an Error
parameter themselves. The others just keep printing the error with
error_report_err().
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20210609154658.350308-2-kwolf@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Raphael Norwitz <raphael.norwitz@nutanix.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Change the '-device help' output from:
Storage devices:
name "floppy", bus floppy-bus, desc "virtual floppy drive"
name "isa-fdc", bus ISA
to:
Storage devices:
name "floppy", bus floppy-bus, desc "virtual floppy drive"
name "isa-fdc", bus ISA, desc "virtual floppy controller"
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20210614193220.2007159-7-philmd@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
Some machines use floppy controllers via the SysBus interface,
and don't need to pull in all the SysBus code.
Extract the SysBus specific code to a new unit: fdc-sysbus.c,
and add a new Kconfig symbol: "FDC_SYSBUS".
Reviewed-by: John Snow <jsnow@redhat.com>
Acked-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20210614193220.2007159-6-philmd@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
Some machines use floppy controllers via the SysBus interface,
and don't need to pull in all the ISA code.
Extract the ISA specific code to a new unit: fdc-isa.c, and
add a new Kconfig symbol: "FDC_ISA".
This allows us to remove the FIXME from commit dd0ff8191a
("isa: express SuperIO dependencies with Kconfig").
Reviewed-by: John Snow <jsnow@redhat.com>
Acked-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20210614193220.2007159-5-philmd@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
We want to extract ISA/SysBus code from the generic fdc.c file.
First, declare the prototypes we will access from the new units
into a new local header: "fdc-internal.h".
Acked-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20210614193220.2007159-4-philmd@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Acked-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20210614193220.2007159-3-philmd@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
Commit e50caf4a5c ("tracing: convert documentation to rST")
converted docs/devel/tracing.txt to docs/devel/tracing.rst.
We still have several references to the old file, so let's fix them
with the following command:
sed -i s/tracing.txt/tracing.rst/ $(git grep -l docs/devel/tracing.txt)
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20210517151702.109066-2-sgarzare@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
- vhost-user-blk: Fix error handling during initialisation
- Add test cases for the vhost-user-blk export
- Fix leaked Transaction objects
- qcow2: Expose dirty bit in 'qemu-img info'
-----BEGIN PGP SIGNATURE-----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=Xe4O
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/kevin/tags/for-upstream' into staging
Block layer patches
- vhost-user-blk: Fix error handling during initialisation
- Add test cases for the vhost-user-blk export
- Fix leaked Transaction objects
- qcow2: Expose dirty bit in 'qemu-img info'
# gpg: Signature made Tue 18 May 2021 11:57:46 BST
# gpg: using RSA key DC3DEB159A9AF95D3D7456FE7F09B272C88F2FD6
# gpg: issuer "kwolf@redhat.com"
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>" [full]
# Primary key fingerprint: DC3D EB15 9A9A F95D 3D74 56FE 7F09 B272 C88F 2FD6
* remotes/kevin/tags/for-upstream:
vhost-user-blk: Check that num-queues is supported by backend
virtio: Fail if iommu_platform is requested, but unsupported
vhost-user-blk: Get more feature flags from vhost device
vhost-user-blk: Improve error reporting in realize
vhost-user-blk: Don't reconnect during initialisation
vhost-user-blk: Make sure to set Error on realize failure
vhost-user-blk-test: test discard/write zeroes invalid inputs
tests/qtest: add multi-queue test case to vhost-user-blk-test
test: new qTest case to test the vhost-user-blk-server
block/export: improve vu_blk_sect_range_ok()
block: Fix Transaction leak in bdrv_reopen_multiple()
block: Fix Transaction leak in bdrv_root_attach_child()
qcow2: set bdi->is_dirty
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Creating a device with a number of queues that isn't supported by the
backend is pointless, the device won't work properly and the error
messages are rather confusing.
Just fail to create the device if num-queues is higher than what the
backend supports.
Since the relationship between num-queues and the number of virtqueues
depends on the specific device, this is an additional value that needs
to be initialised by the device. For convenience, allow leaving it 0 if
the check should be skipped. This makes sense for vhost-user-net where
separate vhost devices are used for the queues and custom initialisation
code is needed to perform the check.
Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1935031
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Raphael Norwitz <raphael.norwitz@nutanix.com>
Message-Id: <20210429171316.162022-7-kwolf@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
VIRTIO_F_RING_PACKED and VIRTIO_F_IOMMU_PLATFORM need to be supported by
the vhost device, otherwise advertising it to the guest doesn't result
in a working configuration. They are currently not supported by the
vhost-user-blk export in QEMU.
Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1935020
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Acked-by: Raphael Norwitz <raphael.norwitz@nutanix.com>
Message-Id: <20210429171316.162022-5-kwolf@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Now that vhost_user_blk_connect() is not called from an event handler
any more, but directly from vhost_user_blk_device_realize(), we can
actually make use of Error again instead of calling error_report() in
the inner function and setting a more generic and therefore less useful
error message in realize() itself.
With Error, the callers are responsible for adding context if necessary
(such as the "-device" option the error refers to). Additional prefixes
are redundant and better omitted.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Acked-by: Raphael Norwitz <raphael.norwitz@nutanix.com>
Message-Id: <20210429171316.162022-4-kwolf@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This is a partial revert of commits 77542d4314 and bc79c87bcd.
Usually, an error during initialisation means that the configuration was
wrong. Reconnecting won't make the error go away, but just turn the
error condition into an endless loop. Avoid this and return errors
again.
Additionally, calling vhost_user_blk_disconnect() from the chardev event
handler could result in use-after-free because none of the
initialisation code expects that the device could just go away in the
middle. So removing the call fixes crashes in several places.
For example, using a num-queues setting that is incompatible with the
backend would result in a crash like this (dereferencing dev->opaque,
which is already NULL):
#0 0x0000555555d0a4bd in vhost_user_read_cb (source=0x5555568f4690, condition=(G_IO_IN | G_IO_HUP), opaque=0x7fffffffcbf0) at ../hw/virtio/vhost-user.c:313
#1 0x0000555555d950d3 in qio_channel_fd_source_dispatch (source=0x555557c3f750, callback=0x555555d0a478 <vhost_user_read_cb>, user_data=0x7fffffffcbf0) at ../io/channel-watch.c:84
#2 0x00007ffff7b32a9f in g_main_context_dispatch () at /lib64/libglib-2.0.so.0
#3 0x00007ffff7b84a98 in g_main_context_iterate.constprop () at /lib64/libglib-2.0.so.0
#4 0x00007ffff7b32163 in g_main_loop_run () at /lib64/libglib-2.0.so.0
#5 0x0000555555d0a724 in vhost_user_read (dev=0x555557bc62f8, msg=0x7fffffffcc50) at ../hw/virtio/vhost-user.c:402
#6 0x0000555555d0ee6b in vhost_user_get_config (dev=0x555557bc62f8, config=0x555557bc62ac "", config_len=60) at ../hw/virtio/vhost-user.c:2133
#7 0x0000555555d56d46 in vhost_dev_get_config (hdev=0x555557bc62f8, config=0x555557bc62ac "", config_len=60) at ../hw/virtio/vhost.c:1566
#8 0x0000555555cdd150 in vhost_user_blk_device_realize (dev=0x555557bc60b0, errp=0x7fffffffcf90) at ../hw/block/vhost-user-blk.c:510
#9 0x0000555555d08f6d in virtio_device_realize (dev=0x555557bc60b0, errp=0x7fffffffcff0) at ../hw/virtio/virtio.c:3660
Note that this removes the ability to reconnect during initialisation
(but not during operation) when there is no permanent error, but the
backend restarts, as the implementation was buggy. This feature can be
added back in a follow-up series after changing error paths to
distinguish cases where retrying could help from cases with permanent
errors.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20210429171316.162022-3-kwolf@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
We have to set errp before jumping to virtio_err, otherwise the caller
(virtio_device_realize()) will take this as success and crash when it
later tries to access things that we've already freed in the error path.
Fixes: 77542d4314
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20210429171316.162022-2-kwolf@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Acked-by: Raphael Norwitz <raphael.norwitz@nutanix.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
With the introduction of the nvme-subsystem device we are really
cluttering up the hw/block directory.
As suggested by Philippe previously, move the nvme emulation to hw/nvme.
Suggested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Validation of the max_active and max_open zoned parameters are
independent of any other state, so move them to the early
nvme_ns_check_constraints parameter checks.
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
It is not an error to report more active/open zones supported than the
number of zones in the namespace.
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
The NvmeCtrl num_namespaces member is just an indirection for the
NVME_MAX_NAMESPACES constant.
Remove the indirection.
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Streamline namespace array indexing such that both the subsystem and
controller namespaces arrays are 1-indexed.
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
There is no need to look up the lba size and metadata size in the LBA
Format structure everytime we want to use it. And we use it a lot.
Cache the values in the NvmeNamespace and update them if the namespace
is formatted.
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
The inline nvme_ns_status() helper only has a single call site. Remove
it from the header file and inline it for real.
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
In preparation for moving the nvme device into its own subtree, merge
the header files into one.
Also add missing copyright notice and add list of authors with
substantial contributions.
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Get rid of the (reserved) double underscore use.
Cc: Philippe Mathieu-Daudé <philmd@redhat.com>
Cc: Thomas Huth <thuth@redhat.com>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Get rid of the (reserved) double underscore use.
Cc: Philippe Mathieu-Daudé <philmd@redhat.com>
Cc: Thomas Huth <thuth@redhat.com>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Get rid of the (reserved) double underscore use. Rename the "generic"
zone open function to nvme_zrm_open_flags() and add a generic `int
flags` argument instead which allows more flags to be easily added in
the future. There is at least one TP under standardization that would
add an additional flag.
Cc: Philippe Mathieu-Daudé <philmd@redhat.com>
Cc: Thomas Huth <thuth@redhat.com>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
While QEMU coding style prefers lowercase hexadecimals in constants, the
NVMe subsystem uses the format from the NVMe specifications in comments,
i.e. 'h' suffix instead of '0x' prefix.
Fix this up across the code base.
Signed-off-by: Gollu Appalanaidu <anaidu.gollu@samsung.com>
[k.jensen: updated message; added conversion in a couple of missing comments]
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
nvme_map_addr_pmr function arguments not aligned, fix that.
Signed-off-by: Gollu Appalanaidu <anaidu.gollu@samsung.com>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Currently IO Command Set Profile feature is supported, but the feature
support flag not set. Further, this feature is changable. Fix that.
Additionally, remove filling default value of the CQE result with zero,
since it will fall back to the default case anyway.
Signed-off-by: Gollu Appalanaidu <anaidu.gollu@samsung.com>
[k.jensen: fix up commit message]
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Currently in compare command metadata aio read blk_aio_preadv return
value ignored. Consider it and complete the block accounting.
Signed-off-by: Gollu Appalanaidu <anaidu.gollu@samsung.com>
Fixes: 0a384f923f ("hw/block/nvme: add compare command")
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Currently pci_nvme_err_invalid_lba_range trace is called individually at
each nvme_check_bounds() call site.
Move the trace event to nvme_check_bounds() and remove the redundant
events.
Signed-off-by: Gollu Appalanaidu <anaidu.gollu@samsung.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
[k.jensen: commit message fixup]
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Fixes all over the place. Faster boot for virtio. ioeventfd support for
mmio.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmCeiMEPHG1zdEByZWRo
YXQuY29tAAoJECgfDbjSjVRpqsIH/A49Av5Bv8huL75lf9GzCx3E1a/z2W9Fphik
OcQ1ahR+7CRDARub+vTG40MBmZBVefIWjLAj3BwBWzFGPX0DZq0zeI102VzlEVKY
OeUx8ixuiKOSLcS+QxE7ZXIBL2Pn7l+MFUi4nLMYKti7c/kola7zlB57qsmXh+VD
AOQ7Utj6NWoi6QocWJsMSCyHCh3Fk9QzcStLlr6/MkSJa1zqv8l22+8oWH07Fk2M
wZfhrm9k094on28iSejsFYL5e4ROeXUajbOdfyMIxWvAB7boC9Jxk/e0oAbuSB4y
2f71Gfk3mU6irS7PvrxcKbk6BVD2zxM2WumOchZJgxFAujDO6yg=
=fvkT
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging
pc,pci,virtio: bugfixes, improvements
Fixes all over the place. Faster boot for virtio. ioeventfd support for
mmio.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Fri 14 May 2021 15:27:13 BST
# gpg: using RSA key 5D09FD0871C8F85B94CA8A0D281F0DB8D28D5469
# gpg: issuer "mst@redhat.com"
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" [full]
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>" [full]
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469
* remotes/mst/tags/for_upstream:
Fix build with 64 bits time_t
vhost-vdpa: Make vhost_vdpa_get_device_id() static
hw/virtio: enable ioeventfd configuring for mmio
hw/smbios: support for type 41 (onboard devices extended information)
checkpatch: Fix use of uninitialized value
virtio-scsi: Configure all host notifiers in a single MR transaction
virtio-scsi: Set host notifiers and callbacks separately
virtio-blk: Configure all host notifiers in a single MR transaction
virtio-blk: Fix rollback path in virtio_blk_data_plane_start()
pc-dimm: remove unnecessary get_vmstate_memory_region() method
amd_iommu: fix wrong MMIO operations
virtio-net: Constify VirtIOFeature feature_sizes[]
virtio-blk: Constify VirtIOFeature feature_sizes[]
hw/virtio: Pass virtio_feature_get_config_size() a const argument
x86: acpi: use offset instead of pointer when using build_header()
amd_iommu: Fix pte_override_page_mask()
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
# Conflicts:
# hw/arm/virt.c
This allows the virtio-blk-pci device to batch the setup of all its
host notifiers. This significantly improves boot time of VMs with a
high number of vCPUs, e.g. from 3m26.186s down to 0m58.023s for a
pseries machine with 384 vCPUs.
Note that memory_region_transaction_commit() must be called before
virtio_bus_cleanup_host_notifier() because the latter might close
ioeventfds that the transaction still assumes to be around when it
commits.
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <20210407143501.244343-3-groug@kaod.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
When dataplane multiqueue support was added in QEMU 2.7, the path
that would rollback guest notifiers assignment in case of error
simply got dropped.
Later on, when Error was added to blk_set_aio_context() in QEMU 4.1,
another error path was introduced, but it ommits to rollback both
host and guest notifiers.
It seems cleaner to fix the rollback path in one go. The patch is
simple enough that it can be adjusted if backported to a pre-4.1
QEMU.
Fixes: 51b04ac5c6 ("virtio-blk: dataplane multiqueue support")
Cc: stefanha@redhat.com
Fixes: 97896a4887 ("block: Add Error to blk_set_aio_context()")
Cc: kwolf@redhat.com
Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20210407143501.244343-2-groug@kaod.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
When no mapping is requested, it is pointless to create
alias regions.
Only create them when multiple mappings are requested to
simplify the memory layout. The flatview is not changed.
For example using 'qemu-system-sh4 -M r2d -S -monitor stdio',
* before:
(qemu) info mtree
address-space: memory
0000000000000000-ffffffffffffffff (prio 0, i/o): system
0000000000000000-0000000000ffffff (prio 0, i/o): pflash
0000000000000000-0000000000ffffff (prio 0, romd): alias pflash-alias @r2d.flash 0000000000000000-0000000000ffffff
0000000004000000-000000000400003f (prio 0, i/o): r2d-fpga
000000000c000000-000000000fffffff (prio 0, ram): r2d.sdram
(qemu) info mtree -f
FlatView #0
AS "memory", root: system
AS "cpu-memory-0", root: system
Root memory region: system
0000000000000000-0000000000ffffff (prio 0, romd): r2d.flash
0000000004000000-000000000400003f (prio 0, i/o): r2d-fpga
000000000c000000-000000000fffffff (prio 0, ram): r2d.sdram
* after:
(qemu) info mtree
address-space: memory
0000000000000000-ffffffffffffffff (prio 0, i/o): system
0000000000000000-0000000000ffffff (prio 0, romd): r2d.flash
0000000004000000-000000000400003f (prio 0, i/o): r2d-fpga
000000000c000000-000000000fffffff (prio 0, ram): r2d.sdram
(qemu) info mtree -f
FlatView #0
AS "memory", root: system
AS "cpu-memory-0", root: system
Root memory region: system
0000000000000000-0000000000ffffff (prio 0, romd): r2d.flash
0000000004000000-000000000400003f (prio 0, i/o): r2d-fpga
000000000c000000-000000000fffffff (prio 0, ram): r2d.sdram
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210325120921.858993-3-f4bug@amsat.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
The ROMD mode isn't related to mapping setup.
Ideally we'd set this mode when the state machine resets,
but for now simply move it to pflash_cfi02_realize() to
not introduce logical change.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210325120921.858993-2-f4bug@amsat.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
... when a xen-block backend instance is created via xenstore.
Following 8d17adf34f ("block: remove support for using "file" driver
with block/char devices"), using the "file" blockdev driver for
everything doesn't work anymore, we need to use the "host_device"
driver when the disk image is a block device and "file" driver when it
is a regular file.
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Acked-by: Paul Durrant <paul@xen.org>
Message-Id: <20210430163432.468894-1-anthony.perard@citrix.com>
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
-----BEGIN PGP SIGNATURE-----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=aCeG
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/vivier2/tags/trivial-branch-for-6.1-pull-request' into staging
Trivial patches pull request 20210503
# gpg: Signature made Mon 03 May 2021 09:34:56 BST
# gpg: using RSA key CD2F75DDC8E3A4DC2E4F5173F30C38BD3F2FBE3C
# gpg: issuer "laurent@vivier.eu"
# gpg: Good signature from "Laurent Vivier <lvivier@redhat.com>" [full]
# gpg: aka "Laurent Vivier <laurent@vivier.eu>" [full]
# gpg: aka "Laurent Vivier (Red Hat) <lvivier@redhat.com>" [full]
# Primary key fingerprint: CD2F 75DD C8E3 A4DC 2E4F 5173 F30C 38BD 3F2F BE3C
* remotes/vivier2/tags/trivial-branch-for-6.1-pull-request: (23 commits)
hw/rx/rx-gdbsim: Do not accept invalid memory size
docs: More precisely describe memory-backend-*::id's user
scripts: fix generation update-binfmts templates
docs/system: Document the removal of "compat" property for POWER CPUs
mc146818rtc: put it into the 'misc' category
Do not include exec/address-spaces.h if it's not really necessary
Do not include cpu.h if it's not really necessary
Do not include hw/boards.h if it's not really necessary
Do not include sysemu/sysemu.h if it's not really necessary
hw: Do not include qemu/log.h if it is not necessary
hw: Do not include hw/irq.h if it is not necessary
hw: Do not include hw/sysbus.h if it is not necessary
hw: Remove superfluous includes of hw/hw.h
ui: Fix memory leak in qemu_xkeymap_mapping_table()
hw/usb: Constify VMStateDescription
hw/display/qxl: Constify VMStateDescription
hw/arm: Constify VMStateDescription
vmstate: Constify some VMStateDescriptions
Fix typo in CFI build documentation
hw/pcmcia: Do not register PCMCIA type if not required
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* Fixes for the DMA space
* New model for ASPEED's Hash and Crypto Engine (Joel and Klaus)
* Acceptance tests (Joel)
* A fix for the XDMA model
* Some extra features for the SMC controller.
* Two new boards : rainier-bmc and quanta-q7l1-bmc (Patrick)
-----BEGIN PGP SIGNATURE-----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=N5Us
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/legoater/tags/pull-aspeed-20210503' into staging
Aspeed patches :
* Fixes for the DMA space
* New model for ASPEED's Hash and Crypto Engine (Joel and Klaus)
* Acceptance tests (Joel)
* A fix for the XDMA model
* Some extra features for the SMC controller.
* Two new boards : rainier-bmc and quanta-q7l1-bmc (Patrick)
# gpg: Signature made Mon 03 May 2021 06:23:36 BST
# gpg: using RSA key A0F66548F04895EBFE6B0B6051A343C7CFFBECA1
# gpg: Good signature from "Cédric Le Goater <clg@kaod.org>" [undefined]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: A0F6 6548 F048 95EB FE6B 0B60 51A3 43C7 CFFB ECA1
* remotes/legoater/tags/pull-aspeed-20210503:
aspeed: Add support for the quanta-q7l1-bmc board
hw/block: m25p80: Add support for mt25ql02g and mt25qu02g
aspeed: Add support for the rainier-bmc board
aspeed: Deprecate the swift-bmc machine
tests/qtest: Rename m25p80 test in aspeed_smc test
aspeed/smc: Add extra controls to request DMA
aspeed/smc: Add a 'features' attribute to the object class
hw/misc/aspeed_xdma: Add AST2600 support
tests/acceptance: Test ast2600 machine
tests/acceptance: Test ast2400 and ast2500 machines
tests/qtest: Add test for Aspeed HACE
aspeed: Integrate HACE
hw: Model ASPEED's Hash and Crypto Engine
hw/arm/aspeed: Do not sysbus-map mmio flash region directly, use alias
aspeed/i2c: Rename DMA address space
aspeed/i2c: Fix DMA address mask
aspeed/smc: Remove unused "sdram-base" property
aspeed/smc: Use the RAM memory region for DMAs
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Stop including sysemu/sysemu.h in files that don't need it.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20210416171314.2074665-2-thuth@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>