Introduce new enum BlockdevOptionsArchipelago.
@volume: #Name of the Archipelago volume image
@mport: #'mport' is the port number on which mapperd is
listening. This is optional and if not specified,
QEMU will make Archipelago to use the default port.
@vport: #'vport' is the port number on which vlmcd is
listening. This is optional and if not specified,
QEMU will make Archipelago to use the default port.
@segment: #optional The name of the shared memory segment
Archipelago stack is using. This is optional
and if not specified, QEMU will make Archipelago
use the default value, 'archipelago'.
Signed-off-by: Chrysostomos Nanakos <cnanakos@grnet.gr>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Add nocow info in 'qemu-img info' output to show whether the file
currently has NOCOW flag set or not.
Signed-off-by: Chunyan Liu <cyliu@suse.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
On some image chains, QEMU may not always be able to resolve the
filenames properly, when updating the backing file of an image
after a block job.
For instance, certain relative pathnames may fail, or drives may
have been specified originally by file descriptor (e.g. /dev/fd/???),
or a relative protocol pathname may have been used.
In these instances, QEMU may lack the information to be able to make
the correct choice, but the user or management layer most likely does
have that knowledge.
With this extension to the block-stream api, the user is able to change
the backing file of the active layer as part of the block-stream
operation.
This allows the change to be 'safe', in the sense that if the attempt
to write the active image metadata fails, then the block-stream
operation returns failure, without disrupting the guest.
If a backing file string is not specified in the command, the backing
file string to use is determined in the same manner as it was
previously.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
On some image chains, QEMU may not always be able to resolve the
filenames properly, when updating the backing file of an image
after a block commit.
For instance, certain relative pathnames may fail, or drives may
have been specified originally by file descriptor (e.g. /dev/fd/???),
or a relative protocol pathname may have been used.
In these instances, QEMU may lack the information to be able to make
the correct choice, but the user or management layer most likely does
have that knowledge.
With this extension to the block-commit api, the user is able to change
the backing file of the overlay image as part of the block-commit
operation.
This allows the change to be 'safe', in the sense that if the attempt
to write the overlay image metadata fails, then the block-commit
operation returns failure, without disrupting the guest.
If the commit top is the active layer, then specifying the backing
file string will be treated as an error (there is no overlay image
to modify in that case).
If a backing file string is not specified in the command, the backing
file string to use is determined in the same manner as it was
previously.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This allows a user to make a live change to the backing file recorded in
an open image.
The image file to modify can be specified 2 ways:
1) image filename
2) image node-name
Note: this does not cause the backing file itself to be reopened; it
merely changes the backing filename in the image file structure, and
in internal BDS structures.
It is the responsibility of the user to pass a filename string that
can be resolved when the image chain is reopened, and the filename
string is not validated.
A good analogy for this command is that it is a live version of
'qemu-img rebase -u', with respect to changing the backing file string.
[Jeff is offline so I respun this patch in his absence. Dropped image
filename since using node-name is preferred and this is a new command.
No need to introduce the limitations of finding images by filename.
--Stefan]
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
fe069d9d had aligned code and documentation while dropping the s from the
actual JSON output. Fix that.
This also fix test/qemu-iotest/081 since the missing s was causing a permutation.
Signed-off-by: Benoit Canet <benoit@irqsave.net>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Now that active layer block-commit is supported, the 'top' argument
no longer needs to be mandatory.
Change it to optional, with the default being the active layer in the
device chain.
[kwolf: Rebased and resolved conflict in tests/qemu-iotests/040]
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
Signed-off-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)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=Wwqx
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/kevin/tags/for-upstream' into staging
Block patches for 2.1.0-rc0
# gpg: Signature made Fri 27 Jun 2014 19:50:32 BST using RSA key ID C88F2FD6
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>"
* remotes/kevin/tags/for-upstream: (47 commits)
iotests: Fix 083 for out-of-tree builds
iotests: Drop Python version from 065's Shebang
iotests: Use $PYTHON for Python scripts
iotests: Source common.env
configure: Enable out-of-tree iotests
iotests: Allow out-of-tree run
block.c: Don't return success for bdrv_append_temp_snapshot() failure
qemu-iotests: Add TestRepairQuorum to 041 to test drive-mirror node-name mode.
block: Add replaces argument to drive-mirror
blockjob: Fix recent BLOCK_JOB_ERROR regression
blockjob: Fix recent BLOCK_JOB_READY regression
virtio-blk: Rename complete_request_early to complete_request_vring
virtio-blk: Unify {non-,}dataplane's request handlings
virtio-blk: Schedule BH in the right context
virtio-blk: Export request handling functions to dataplane
virtio-blk: Make request completion function virtual
block: acquire AioContext in qmp_query_blockstats()
block: make bdrv_query_stats() static
virtio-blk: Fix and clean up the in_sg and out_sg check
virtio-blk: Fill in VirtIOBlockReq.out in dataplane code
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
drive-mirror will bdrv_swap the new BDS named node-name with the one
pointed by replaces when the mirroring is finished.
Signed-off-by: Benoit Canet <benoit@irqsave.net>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Commit 5a2d2cb screwed up the the value of members device and action,
breaking tests/qemu-iotests/041.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Tested-By: Benoit Canet <benoit@irqsave.net>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Commit bcada37 dropped the (up to now undocumented) members type, len,
offset, speed, breaking tests/qemu-iotests/040 and 041.
Restore and document them. This fixes 040, and partially fixes 041.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Tested-By: Benoit Canet <benoit@irqsave.net>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Libvirt wants to know about the guest-side connection state of some
virtio-serial ports (in particular the one(s) assigned to guest agent(s)).
Report such states with a new monitor event.
RHBZ: https://bugzilla.redhat.com/show_bug.cgi?id=1080376
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
This patch improves docs and address small issues in event
callers.
Signed-off-by: Wenchao Xia <wenchaoqemu@gmail.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
This new argument can be used to specify the node-name of the new mirrored BDS.
Signed-off-by: Benoit Canet <benoit@irqsave.net>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
On read operations when this parameter is set and some replicas are corrupted
while quorum can be reached quorum will proceed to rewrite the correct version
of the data to fix the corrupted replicas.
This will shine with SSD where the FTL will remap the same block at another
place on rewrite.
Signed-off-by: Benoit Canet <benoit@irqsave.net>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Since BLOCK_JOB_COMPLETED, BLOCK_JOB_CANCELLED, BLOCK_JOB_READY are
related, convert them in one patch. The block_job_event_* functions
are used to keep encapsulation of BlockJob structure.
Signed-off-by: Wenchao Xia <wenchaoqemu@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
In order to let event defines use existing types later, instead of
redefine new ones, some old type defines for spice and vnc are changed,
and BlockErrorAction is moved from block.h to qapi schema. Note that
BlockErrorAction is not merged with BlockdevOnError.
At this point, VncInfo is not made a child of VncBasicInfo, because
VncBasicInfo has mandatory fields where VncInfo makes them optional.
Signed-off-by: Wenchao Xia <wenchaoqemu@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
This file holds some functions that do not need to be generated.
Signed-off-by: Wenchao Xia <wenchaoqemu@gmail.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
"0x1-0x10" looks better than "0x1-10"
Signed-off-by: Hu Tao <hutao@cn.fujitsu.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
in human mode, we are creating the string:
16-31 (16-31)
instead of
16-17 (10-1f)
because we forgot to pass 'true' as the human parameter on one of the
two calls to format_string.
Also, this is a worsening of quality; previously we would produce
16 (0x10)
to make it obvious which number was hex.
Fix these issues.
Reported-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Remove dead code. Reset errno to 0 before each strtoull call, as the
man page requires.
Reported-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
The following commits:
qapi: make string output visitor parse int list
qapi: make string input visitor parse int list
break with glib < 2.28 since they use the
new g_list_free_full function.
Open-code that to fix build on old systems.
Cc: Hu Tao <hutao@cn.fujitsu.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Hu Tao <hutao@cn.fujitsu.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Tested-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
MST: split up patch
Signed-off-by: Hu Tao <hutao@cn.fujitsu.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Tested-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
MST: split up patch
qemu_opt_del() already assumes that all QemuOpt instances contain
malloc'd name and value; but it had to cast away const because
opts_start_struct() was doing its own thing and using static storage
instead. By using the correct type and malloced strings everywhere, the
usage of this struct becomes clearer.
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Leandro Dorileo <l@dorileo.org>
Signed-off-by: Chunyan Liu <cyliu@suse.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
qapi/block-core.json contains block definitions unrelated to emulation.
qapi/block.json is a superset of the previous and contains definitions related
to emulation.
The purpose of these extractions is to be able to hook qapi/block-core.json
generated code on qemu-nbd.
Signed-off-by: Benoit Canet <benoit@irqsave.net>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
A NULL value is not added to visitor's stack, but there
is no check for that when the visitor tries to return
that value, leading to QEMU crash.
Reviewed-by: Eric Blake <eblake@redhat.com>
Acked-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Marcel Apfelbaum <marcel.a@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
We commonly use the error API like this:
err = NULL;
foo(..., &err);
if (err) {
goto out;
}
bar(..., &err);
Every error source is checked separately. The second function is only
called when the first one succeeds. Both functions are free to pass
their argument to error_set(). Because error_set() asserts no error
has been set, this effectively means they must not be called with an
error set.
The qapi-generated code uses the error API differently:
// *errp was initialized to NULL somewhere up the call chain
frob(..., errp);
gnat(..., errp);
Errors accumulate in *errp: first error wins, subsequent errors get
dropped. To make this work, the second function does nothing when
called with an error set. Requires non-null errp, or else the second
function can't see the first one fail.
This usage has also bled into visitor tests, and two device model
object property getters rtc_get_date() and balloon_stats_get_all().
With the "accumulate" technique, you need fewer error checks in
callers, and buy that with an error check in every callee. Can be
nice.
However, mixing the two techniques is confusing. You can't use the
"accumulate" technique with functions designed for the "check
separately" technique. You can use the "check separately" technique
with functions designed for the "accumulate" technique, but then
error_set() can't catch you setting an error more than once.
Standardize on the "check separately" technique for now, because it's
overwhelmingly prevalent.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Semantics of end_optional() differ subtly from the other end_FOO()
callbacks: when start_FOO() succeeds, the matching end_FOO() gets
called regardless of what happens in between. end_optional() gets
called only when everything in between succeeds as well. Entirely
undocumented, like all of the visitor API.
The only user of Visitor Callback end_optional() never did anything,
and was removed in commit 9f9ab46.
I'm about to clean up error handling in the generated visitor code,
and end_optional() is in my way. No users mean no test cases, and
making non-trivial cleanup transformations without test cases doesn't
strike me as a good idea.
Drop end_optional(), and rename start_optional() to optional(). We
can always go back to a pair of callbacks when we have an actual need.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
These have never been called or implemented by anything, and their
intended use is undocumented, like all of the visitor API.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
This reverts commit 25a7017555.
Turns out the argument *can* be null: QEMU now segfaults if it
receives an invalid parameter via a qmp command instead of throwing an
error.
For example:
{ "execute": "blockdev-add",
"arguments": { "options" : { "driver": "invalid-driver" } } }
CC: qemu-stable@nongnu.org
Signed-off-by: Peter Lieven <pl@kamp.de>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Using error_is_set(ERRP) to find out whether a function failed is
either wrong, fragile, or unnecessarily opaque. It's wrong when ERRP
may be null, because errors go undetected when it is. It's fragile
when proving ERRP non-null involves a non-local argument. Else, it's
unnecessarily opaque (see commit 84d18f0).
The error_is_set(errp) in do_qmp_dispatch() is merely fragile, because
the caller never passes a null errp argument.
Make the code more robust and more obviously correct: receive the
error in a local variable, then propagate it through the parameter.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
do_qmp_dispatch()'s test for qmp_dispatch_check_obj() failure examines
both the return value and the error object. The latter part is
unclean; it works only when do_qmp_dispatch()'s caller passes a
non-null errp argument. That's the case, but it's not locally
obvious. Unclean.
Cleanup would be easy enough, but since the unclean code is also
redundant, let's just drop it.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
strtosz_suffix() might return negative error, this patch fixes
the error handling.
This patch also changes to handle error in the if statement
rather than handle success specially, this will make this use
of strtosz_suffix consistent with all other uses.
Signed-off-by: Amos Kong <akong@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Just hardcode them in the callers
Cc: Luiz Capitulino <lcapitulino@redhat.com>
Cc: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Argument is null when visiting an unboxed struct. I can't see such a
visit in the current code. Fix it anyway.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Argument can't be null. No other Visitor method type_str() checks for
null.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
This fixes several bugs or shortcomings of the previous pretty-printer.
In particular:
* use PRIu64 instead of casting to long long
* the exact value is included too
* the correct unit of measure (MiB, GiB, etc.) is used. PiB and EiB
are added too.
* due to an off-by-one error, 512*2^30 was printed as 0.500MiB rather than
512MiB. floor(log2(val)) is equal to 63 - clz(val), while the code used 64.
* The desired specification is %g rather than %f, which always uses three
decimals in the current code. However %g would switch to scientific
notation when the integer part is >= 1000 (e.g. 1000*2^30). To keep the
code simple, switch to the higher power when the integer part is >= 1000;
overflow is avoided by using frexp instead of clz.
Suggested-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
This will be used by "info qtree". For numbers it prints both the
decimal and hex values. For sizes it rounds to the nearest power
of 2^10. For strings, it puts quotes around the string and separates
NULL and empty string.
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Chrysostomos Nanakos
Chunyan Liu
Jeff Cody
Benoît Canet
Peter Maydell
Markus Armbruster
Laszlo Ersek
Wenchao Xia
Hu Tao
Michael S. Tsirkin
Marcel Apfelbaum
Peter Lieven
Amos Kong
Cole Robinson
Paolo Bonzini
Wenchao Xia